---

CSCGeometryBuilderFromDDD Class Reference

Build the CSCGeometry from the DDD description. More...

#include <Geometry/CSCGeometryBuilder/src/CSCGeometryBuilderFromDDD.h>

List of all members.

Public Member Functions
void	build (boost::shared_ptr< CSCGeometry > geom, const DDCompactView *fv, const MuonDDDConstants &muonConstants)
	Build the geometry.
	CSCGeometryBuilderFromDDD ()
	Constructor.
virtual	~CSCGeometryBuilderFromDDD ()
	Destructor.
Private Member Functions
void	buildChamber (boost::shared_ptr< CSCGeometry > theGeometry, CSCDetId chamberId, const std::vector< float > &fpar, const std::vector< float > &fupar, const std::vector< float > &gtran, const std::vector< float > &grmat, const CSCWireGroupPackage &wg)
	Build one CSC chamber, and its component layers, and add them to the geometry.
void	buildEndcaps (boost::shared_ptr< CSCGeometry > geom, DDFilteredView *fv, const MuonDDDConstants &muonConstants)
	Build endcap CSCs.
Private Attributes
const std::string	myName

---

Detailed Description

Build the CSCGeometry from the DDD description.

Author:

Tim Cox

Definition at line 21 of file CSCGeometryBuilderFromDDD.h.

---

Constructor & Destructor Documentation

CSCGeometryBuilderFromDDD::CSCGeometryBuilderFromDDD

(

)

Constructor.

Definition at line 26 of file CSCGeometryBuilderFromDDD.cc.

: myName("CSCGeometryBuilderFromDDD"){}

CSCGeometryBuilderFromDDD::~CSCGeometryBuilderFromDDD

(

)

[virtual]

Destructor.

Definition at line 29 of file CSCGeometryBuilderFromDDD.cc.

{}

---

Member Function Documentation

void CSCGeometryBuilderFromDDD::build	(	boost::shared_ptr< CSCGeometry >	geom,
		const DDCompactView *	fv,
		const MuonDDDConstants &	muonConstants
	)

Build the geometry.

Definition at line 32 of file CSCGeometryBuilderFromDDD.cc.

References DDFilteredView::addFilter(), DDSpecificsFilter::AND, buildEndcaps(), DDSpecificsFilter::equals, filter, DDFilteredView::firstChild(), DDSpecificsFilter::setCriteria(), and value.

Referenced by MuonGeometryIntoNtuples::beginJob(), AlignmentMonitorAsAnalyzer::beginJob(), AlignmentProducer::createGeometries_(), CSCGeometryESModule::geometryCallback_(), MuonAlignmentInputMethod::idealCSCGeometry(), MisalignedMuonESProducer::produce(), and MuonAlignmentOutputXML::write().

                                                                                                                                         {

  std::string attribute = "MuStructure";      // could come from outside
  std::string value     = "MuonEndcapCSC";    // could come from outside
  DDValue muval(attribute, value, 0.0);

  // Asking for a specific section of the MuStructure

  DDSpecificsFilter filter;
  filter.setCriteria(muval, // name & value of a variable 
                     DDSpecificsFilter::equals,
                     DDSpecificsFilter::AND, 
                     true, // compare strings otherwise doubles
                     true // use merged-specifics or simple-specifics
                     );

  DDFilteredView fview( *cview );
  fview.addFilter(filter);

  bool doSubDets = fview.firstChild();
  doSubDets      = fview.firstChild(); // and again?!
  buildEndcaps( geom, &fview, muonConstants ); 

}

void CSCGeometryBuilderFromDDD::buildChamber	(	boost::shared_ptr< CSCGeometry >	theGeometry,
		CSCDetId	chamberId,
		const std::vector< float > &	fpar,
		const std::vector< float > &	fupar,
		const std::vector< float > &	gtran,
		const std::vector< float > &	grmat,
		const CSCWireGroupPackage &	wg
	)			[private]

Build one CSC chamber, and its component layers, and add them to the geometry.

Definition at line 267 of file CSCGeometryBuilderFromDDD.cc.

References BoundSurface::bounds(), BoundPlane::build(), CSCDetId::chamber(), CSCDetId::endcap(), lat::endl(), CSCChamberSpecs::evenLayerGeometry(), j, CSCDetId::layer(), LogTrace, myName, CSCChamberSpecs::oddLayerGeometry(), TrapezoidalPlaneBounds::parameters(), CSCDetId::ring(), TkRotation< T >::rotateAxes(), CSCDetId::station(), GeomDet::surface(), Bounds::thickness(), and CSCChamberSpecs::whatChamberType().

Referenced by buildEndcaps().

          {

  LogTrace(myName) << myName  << ": entering buildChamber" ;

  int jend   = chamberId.endcap();
  int jstat  = chamberId.station();
  int jring  = chamberId.ring();
  int jch    = chamberId.chamber();
  int jlay   = chamberId.layer();

  if (jlay != 0 ) edm::LogWarning(myName) << "Error! CSCGeometryBuilderFromDDD was fed layer id = " << jlay << "\n";

  const size_t kNpar = 4;
  if ( fpar.size() != kNpar ) 
    edm::LogError(myName) << "Error, expected npar=" 
              << kNpar << ", found npar=" << fpar.size() << std::endl;

  LogTrace(myName) << myName  << ":  E" << jend << " S" << jstat << " R" << jring <<
    " C" << jch << " L" << jlay ;
  LogTrace(myName) << myName  << ": npar=" << fpar.size() << " hB=" << fpar[0] 
                  << " hT=" << fpar[1] << " hD=" << fpar[2] << " hH=" << fpar[3] ;
  LogTrace(myName) << myName  << ": gtran[0,1,2]=" << gtran[0] << " " << gtran[1] << " " << gtran[2] ;
  LogTrace(myName) << myName  << ": grmat[0-8]=" << grmat[0] << " " << grmat[1] << " " << grmat[2] << " "
         << grmat[3] << " " << grmat[4] << " " << grmat[5] << " "
                  << grmat[6] << " " << grmat[7] << " " << grmat[8] ;
  LogTrace(myName) << myName  << ": nupar=" << fupar.size() << " upar[0]=" << fupar[0]
                   << " upar[" << fupar.size()-1 << "]=" << fupar[fupar.size()-1];


  CSCChamber* chamber = const_cast<CSCChamber*>(theGeometry->chamber( chamberId ));
  if ( chamber ){
  }
  else { // this chamber not yet built/stored
  
    LogTrace(myName) << myName <<": buildSpecs requested for ME" << jstat << jring ;
    int chamberType = CSCChamberSpecs::whatChamberType( jstat, jring );
    const CSCChamberSpecs* aSpecs = theGeometry->findSpecs( chamberType );
    if ( aSpecs == 0 ) aSpecs = theGeometry->buildSpecs( chamberType, fpar, fupar, wg );

   // Build a Transformation out of GEANT gtran and grmat...
   // These are used to transform a point in the local reference frame
   // of a subdetector to the global frame of CMS by
   //         (grmat)^(-1)*local + (gtran)
   // The corresponding transformation from global to local is
   //         (grmat)*(global - gtran)
 
    BoundSurface::RotationType aRot( grmat[0], grmat[1], grmat[2], 
                                     grmat[3], grmat[4], grmat[5],
                                     grmat[6], grmat[7], grmat[8] );

   // This rotation from GEANT considers the detector face as the x-z plane.
   // We want this to be the local x-y plane.
   // Furthermore, the -z_global endcap has LH local coordinates, since it is built
   // in GEANT as a *reflection* of the +z_global endcap.
   // So we need to rotate, and in -z flip local x.

   // aRot.rotateAxes will transform aRot in place so that it becomes
   // applicable to the new local coordinates: detector face in x-y plane
   // looking out along z, in either endcap.

   // The interface for rotateAxes specifies 'new' X,Y,Z but the
   // implementation deals with them as the 'old'.

    Basic3DVector<float> oldX( 1., 0.,  0. );
    Basic3DVector<float> oldY( 0., 0., -1. );
    Basic3DVector<float> oldZ( 0., 1.,  0. );

    if ( gtran[2]<0. ) oldX *= -1; 

    aRot.rotateAxes( oldX, oldY, oldZ );
      
    // Need to know z of layers w.r.t to z of centre of chamber. 
 
    // The chamber structure is
    //          top                     bottom
    // layer     1    2    3    4    5    6
    //     |F|Ps|G|Ps|G|Ps|G|Ps|G|Ps|G|Ps|G|P|F|
    //         

    float frameThickness     = fupar[31]/10.; // mm -> cm
    float gapThickness       = fupar[32]/10.; // mm -> cm
    float panelThickness     = fupar[33]/10.; // mm -> cm
    float zAverageAGVtoAF    = fupar[34]/10.; // mm -> cm

    float layerThickness = gapThickness; // consider the layer to be the gas gap
    float layerSeparation = gapThickness + panelThickness; // centre-to-centre of neighbouring layers

    float chamberThickness = 7.*panelThickness + 6.*gapThickness + 2.*frameThickness ; // chamber frame thickness
    float hChamberThickness = chamberThickness/2.; // @@ should match value returned from DDD directly

    // zAverageAGVtoAF is offset between centre of chamber (AF) and (L1+L6)/2 (average AGVs) 
    // where AF = AluminumFrame and AGV=ActiveGasVolume (volume names in DDD).
    // It is signed based on global z values: zc - (zl1+zl6)/2

    // Local z values w.r.t. AF...
    //     z of wires in layer 1 = z_w1 = +/- zAverageAGVtoAF + 2.5*layerSeparation; // layer 1 is at most +ve local z
    // The sign in '+/-' depends on relative directions of local and global z. 
    // It is '-' if they are the same direction, and '+' if opposite directions.
    //     z of wires in layer N   = z_wN = z_w1 - (N-1)*layerSeparation; 
    //     z of strips in layer N  = z_sN = z_wN + gapThickness/2.; // at more +ve local z

    // Set dimensions of trapezoidal chamber volume 
    // N.B. apothem is 4th in fpar but 3rd in ctor 

    // hChamberThickness and fpar[2] should be the same - but using the above value at least shows
    // how chamber structure works

    //    TrapezoidalPlaneBounds* bounds =  new TrapezoidalPlaneBounds( fpar[0], fpar[1], fpar[3], fpar[2] ); 
    TrapezoidalPlaneBounds* bounds =  new TrapezoidalPlaneBounds( fpar[0], fpar[1], fpar[3], hChamberThickness ); 

    // Centre of chamber in z is specified in DDD
    Surface::PositionType aVec( gtran[0], gtran[1], gtran[2] ); 

    BoundPlane::BoundPlanePointer plane = BoundPlane::build(aVec, aRot, bounds); 
    delete bounds; // bounds cloned by BoundPlane, so we can delete it

    CSCChamber* chamber = new CSCChamber( plane, chamberId, aSpecs );
    theGeometry->addChamber( chamber ); 

    LogTrace(myName) << myName << ": Create chamber E" << jend << " S" << jstat 
                     << " R" << jring << " C" << jch 
                     << " z=" << gtran[2]
                     << " t/2=" << fpar[2] << " (DDD) or " << hChamberThickness 
                     << " (specs) adr=" << chamber ;

    // Create the component layers of this chamber   
    // We're taking the z as the z of the wire plane within the layer (middle of gas gap)

    // Specify global z of layer by offsetting from centre of chamber: since layer 1 
    // is nearest to IP in stations 1/2 but layer 6 is nearest in stations 3/4, 
    // we need to adjust sign of offset appropriately...
    int localZwrtGlobalZ = +1;
    if ( (jend==1 && jstat<3 ) || ( jend==2 && jstat>2 ) ) localZwrtGlobalZ = -1;
    int globalZ = +1;
    if ( jend == 2 ) globalZ = -1;

    LogTrace(myName) << myName << ": layerSeparation=" << layerSeparation
                     << ", zAF-zAverageAGV="  << zAverageAGVtoAF
                     << ", localZwrtGlobalZ=" << localZwrtGlobalZ
                     << ", gtran[2]=" << gtran[2] ;

    for ( short j = 1; j <= 6; ++j ) {

      CSCDetId layerId = CSCDetId( jend, jstat, jring, jch, j );

      // extra-careful check that we haven't already built this layer
      const CSCLayer* cLayer = dynamic_cast<const CSCLayer*> (theGeometry->idToDet( layerId ) );

      if ( cLayer == 0 ) {

        // build the layer - need the chamber's specs and an appropriate layer-geometry
         const CSCChamberSpecs* aSpecs = chamber->specs();
         const CSCLayerGeometry* geom = 
                    (j%2 != 0) ? aSpecs->oddLayerGeometry( jend ) : 
                                 aSpecs->evenLayerGeometry( jend );

        // Build appropriate BoundPlane, based on parent chamber, with gas gap as thickness

        // centre of chamber is at global z = gtran[2]
        // centre of layer j=1 is 2.5 layerSeparations from average AGV, hence centre of layer w.r.t. AF
        float zlayer = gtran[2] - globalZ*zAverageAGVtoAF + localZwrtGlobalZ*(3.5-j)*layerSeparation;

        BoundSurface::RotationType chamberRotation = chamber->surface().rotation();
        BoundPlane::PositionType layerPosition( gtran[0], gtran[1], zlayer );
        //        TrapezoidalPlaneBounds* bounds = new TrapezoidalPlaneBounds( *geom );
        //      std::vector<float> dims = bounds->parameters(); // returns hb, ht, d, a
        std::vector<float> dims = geom->parameters(); // returns hb, ht, d, a
        dims[2] = layerThickness/2.; // half-thickness required and note it is 3rd value in vector
        //        delete bounds;        
        //        bounds = new TrapezoidalPlaneBounds( dims[0], dims[1], dims[3], dims[2] );
        TrapezoidalPlaneBounds* bounds = new TrapezoidalPlaneBounds( dims[0], dims[1], dims[3], dims[2] );
        BoundPlane::BoundPlanePointer plane = BoundPlane::build(layerPosition, chamberRotation, bounds);
        delete bounds;

        CSCLayer* layer = new CSCLayer( plane, layerId, chamber, geom );

        LogTrace(myName) << myName << ": Create layer E" << jend << " S" << jstat 
                    << " R" << jring << " C" << jch << " L" << j
                    << " z=" << zlayer
                         << " t=" << layerThickness << " or " << layer->surface().bounds().thickness()
                    << " adr=" << layer << " layerGeom adr=" << geom ;

        chamber->addComponent(j, layer); 
        theGeometry->addLayer( layer );
      }
      else {
        edm::LogError(myName) << ": ERROR, layer " << j <<
            " for chamber = " << ( chamber->id() ) <<
            " already exists: layer address=" << cLayer <<
            " chamber address=" << chamber << "\n";
      }

    } // layer construction within chamber
  } // chamber construction
}

void CSCGeometryBuilderFromDDD::buildEndcaps	(	boost::shared_ptr< CSCGeometry >	geom,
		DDFilteredView *	fv,
		const MuonDDDConstants &	muonConstants
	)			[private]

Build endcap CSCs.

Definition at line 57 of file CSCGeometryBuilderFromDDD.cc.

References CSCWireGroupPackage::alignmentPinToFirstWire, CSCNumberingScheme::baseNumberToUnitNumber(), buildChamber(), CSCDetId::chamber(), CSCWireGroupPackage::consecutiveGroups, edmNew::copy(), ddsubtraction, CSCDetId::endcap(), first, DDFilteredView::geoHistory(), MuonDDDNumbering::geoHistoryToBaseNumber(), i, int, it, CSCDetId::layer(), CSCWireGroupPackage::lengthOfWirePlane, DDFilteredView::logicalPart(), LogTrace, myName, CSCWireGroupPackage::narrowWidthOfWirePlane, DDFilteredView::next(), CSCWireGroupPackage::numberOfGroups, DDSolid::parameters(), CSCDetId::ring(), DDFilteredView::rotation(), edm::second(), DDSolid::shape(), DDLogicalPart::solid(), DDBooleanSolid::solidA(), DDFilteredView::specifics(), CSCDetId::station(), DDFilteredView::translation(), CSCWireGroupPackage::wideWidthOfWirePlane, CSCWireGroupPackage::wiresInEachGroup, and CSCWireGroupPackage::wireSpacing.

Referenced by build().

                                                              {

  bool doAll(true);

  // Here we're reading the cscSpecs.xml file

  int noOfAnonParams = 0;

  while (doAll) {
    std::string upstr = "upar";
    std::vector<const DDsvalues_type *> spec = fv->specifics();
    std::vector<const DDsvalues_type *>::const_iterator spit = spec.begin();

    std::vector<double> uparvals;

    // Package up the wire group info as it's decoded
    CSCWireGroupPackage wg; 

    //std::cout << "size of spec=" << spec.size() << std::endl;
    for (;  spit != spec.end(); spit++) {
      DDsvalues_type::const_iterator it = (**spit).begin();
      for (;  it != (**spit).end(); it++) {
        //std::cout << "it->second.name()=" << it->second.name() << std::endl;  
        if (it->second.name() == upstr) {
          uparvals = it->second.doubles();
          //std::cout << "found upars " << std::endl;
        } else if (it->second.name() == "NoOfAnonParams") {
          noOfAnonParams = static_cast<int>( it->second.doubles()[0] );
        } else if (it->second.name() == "NumWiresPerGrp") {
          //numWiresInGroup = it->second.doubles();
          for ( size_t i = 0 ; i < it->second.doubles().size(); i++) {
            wg.wiresInEachGroup.push_back( int( it->second.doubles()[i] ) );
          }
          //std::cout << "found upars " << std::endl;
        } else if ( it->second.name() == "NumGroups" ) {
          //numGroups = it->second.doubles();
          for ( size_t i = 0 ; i < it->second.doubles().size(); i++) {
            wg.consecutiveGroups.push_back( int( it->second.doubles()[i] ) );
          }
        } else if ( it->second.name() == "WireSpacing" ) {
          wg.wireSpacing = it->second.doubles()[0];
        } else if ( it->second.name() == "AlignmentPinToFirstWire" ) {
          wg.alignmentPinToFirstWire = it->second.doubles()[0]; 
        } else if ( it->second.name() == "TotNumWireGroups" ) {
          wg.numberOfGroups = int(it->second.doubles()[0]);
        } else if ( it->second.name() == "LengthOfFirstWire" ) {
          wg.narrowWidthOfWirePlane = it->second.doubles()[0];
        } else if ( it->second.name() == "LengthOfLastWire" ) {
          wg.wideWidthOfWirePlane = it->second.doubles()[0];
        } else if ( it->second.name() == "RadialExtentOfWirePlane" ) {
          wg.lengthOfWirePlane = it->second.doubles()[0];
        }
      }
    }

    std::vector<float> fpar;
    std::vector<double> dpar;
    if ( fv->logicalPart().solid().shape() == ddsubtraction ) {
      const DDSubtraction& first = fv->logicalPart().solid();
      const DDSubtraction& second = first.solidA();
      const DDSolid& third = second.solidA();
      dpar = third.parameters();
    } else {
      dpar = fv->logicalPart().solid().parameters();
    }
    
    LogTrace(myName) << myName  << ": noOfAnonParams=" << noOfAnonParams;

    LogTrace(myName) << myName  << ": fill fpar...";
    LogTrace(myName) << myName  << ": dpars are... " << 
          dpar[4]/cm << ", " << dpar[8]/cm << ", " << 
      dpar[3]/cm << ", " << dpar[0]/cm;


    fpar.push_back( static_cast<float>( dpar[4]/cm) );
    fpar.push_back( static_cast<float>( dpar[8]/cm ) ); 
    fpar.push_back( static_cast<float>( dpar[3]/cm ) ); 
    fpar.push_back( static_cast<float>( dpar[0]/cm ) ); 

    LogTrace(myName) << myName  << ": fill gtran...";

    std::vector<float> gtran( 3 );
// MEC: first pass conversion to ROOT::Math take or modify as you will..
    gtran[0] = (float) 1.0 * (fv->translation().X() / cm);
    gtran[1] = (float) 1.0 * (fv->translation().Y() / cm);
    gtran[2] = (float) 1.0 * (fv->translation().Z() / cm);

    LogTrace(myName) << myName << ": gtran[0]=" << gtran[0] << ", gtran[1]=" << 
        gtran[1] << ", gtran[2]=" << gtran[2];

// MEC: Other option on final pass ROOT::Math 
    //    std::vector<double> dblgtran( 3 );
    //    fv->translation().GetCoordinates(dblgtran.begin(), dblgtran.end());
    //    size_t gtind = 0;
    //    for (std::vector<double>::const_iterator dit= dblgtran.begin(); dit != dblgtran.end(); ++dit) {
    //      gtran[gtind++]=( (float) 1.0 * (*dit) );
    //    }

    LogTrace(myName) << myName  << ": fill grmat...";

    std::vector<float> grmat( 9 ); // set dim so can use [.] to fill
    // MEC: ROOT::Math conversion
     std::vector<float> trm(9);
     fv->rotation().GetComponents(trm.begin(), trm.end());
     size_t rotindex = 0;
     for (size_t i = 0; i < 9; ++i) {
       grmat[i] = (float) 1.0 * trm[rotindex];
       rotindex = rotindex + 3;
       if ( (i+1) % 3 == 0 ) {
         rotindex = (i+1) / 3;
       }
     }

    LogTrace(myName) << myName  << ": fill fupar...";

    std::vector<float> fupar;
    for (size_t i = 0; i < uparvals.size(); i++)
      fupar.push_back( static_cast<float>( uparvals[i] ) ); //@ FIXME perhaps should keep as double!

    // MuonNumbering numbering wraps the subdetector hierarchy labelling

    LogTrace(myName) << myName  << ": create numbering scheme...";

    MuonDDDNumbering mdn(muonConstants);
    MuonBaseNumber mbn = mdn.geoHistoryToBaseNumber(fv->geoHistory());
    CSCNumberingScheme mens(muonConstants);

    LogTrace(myName) << myName  << ": find detid...";

    int id = mens.baseNumberToUnitNumber( mbn ); //@@ FIXME perhaps should return CSCDetId itself?

      LogTrace(myName) << myName  << ": raw id for this detector is " << id << 
        ", octal " << std::oct << id << ", hex " << std::hex << id << std::dec;
      LogTrace(myName) << myName  << ": looking for wire group info for layer " <<
              "E" << CSCDetId::endcap(id) << 
             " S" << CSCDetId::station(id) << 
             " R" << CSCDetId::ring(id) <<
             " C" << CSCDetId::chamber(id) <<
             " L" << CSCDetId::layer(id);
            
      if ( wg.numberOfGroups != 0 ) {
        LogTrace(myName) << myName  << ": fv->geoHistory:      = " << fv->geoHistory() ;
        LogTrace(myName) << myName  << ": TotNumWireGroups     = " << wg.numberOfGroups ;
        LogTrace(myName) << myName  << ": WireSpacing          = " << wg.wireSpacing ;
        LogTrace(myName) << myName  << ": AlignmentPinToFirstWire = " << wg.alignmentPinToFirstWire ;
        LogTrace(myName) << myName  << ": Narrow width of wire plane = " << wg.narrowWidthOfWirePlane ;
        LogTrace(myName) << myName  << ": Wide width of wire plane = " << wg.wideWidthOfWirePlane ;
        LogTrace(myName) << myName  << ": Length in y of wire plane = " << wg.lengthOfWirePlane ;
        LogTrace(myName) << myName  << ": wg.consecutiveGroups.size() = " << wg.consecutiveGroups.size() ;
        LogTrace(myName) << myName  << ": wg.wiresInEachGroup.size() = " << wg.wiresInEachGroup.size() ;
        LogTrace(myName) << myName  << ": \tNumGroups\tWiresInGroup" ;
        for (size_t i = 0; i < wg.consecutiveGroups.size(); i++) {
          LogTrace(myName) << myName  << " \t" << wg.consecutiveGroups[i] << "\t\t" << wg.wiresInEachGroup[i] ;
        }
      } else {
        LogTrace(myName) << myName  << ": missing  specpars for wire groups" ;
      }
      LogTrace(myName) << myName << ": end of wire group info. " ;

      CSCDetId detid = CSCDetId( id );
      int jendcap  = detid.endcap();
      int jstation = detid.station();
      int jring    = detid.ring();
      int jchamber = detid.chamber();
      int jlayer   = detid.layer();

      LogTrace(myName) << myName << ":_z_ E" << jendcap << " S" << jstation << " R" << jring << 
        " C" << jchamber << " L" << jlayer << 
        " gx=" << gtran[0] << ", gy=" << gtran[1] << ", gz=" << gtran[2] <<
        " thickness=" << fpar[2]*2.;
   
      if ( jlayer == 0 ) { // Can only build chambers if we're filtering them

      LogTrace(myName) << myName  << ":_z_ frame=" << fupar[31]/10. << 
        " gap=" << fupar[32]/10. << " panel=" << fupar[33]/10. << " offset=" << fupar[34]/10.;

      // Are we going to apply centre-to-intersection offsets, even if values exist in the specs file?
      if ( !theGeometry->centreTIOffsets() ) fupar[30] = 0.;  // reset to zero if flagged 'off'

      if ( jstation==1 && jring==1 ) {
        // set up params for ME1a and ME1b and call buildChamber *for each*
        // Both get the full ME11 dimensions

        // detid is for ME11 and that's what we're using for ME1b in the software
        buildChamber (theGeometry, detid, fpar, fupar, gtran, grmat, wg ); // ME1b

        // No. of anonymous parameters per chamber type should be read from cscSpecs file...
        // Only required for ME11 splitting into ME1a and ME1b values,
        // If it isn't seen may as well try to get further but this value will depend
        // on structure of the file so may not even match! 
        const int kNoOfAnonParams = 35;
        if ( noOfAnonParams == 0 ) { noOfAnonParams = kNoOfAnonParams; } // in case it wasn't seen

        std::copy( fupar.begin()+noOfAnonParams, fupar.end(), fupar.begin() ); // copy ME1a params from back to the front
        CSCDetId detid1a = CSCDetId( jendcap, 1, 4, jchamber, 0 ); // reset to ME1A
        buildChamber (theGeometry, detid1a, fpar, fupar, gtran, grmat, wg ); // ME1a

      }
      else {
        buildChamber (theGeometry, detid, fpar, fupar, gtran, grmat, wg );
      }

      } // if filtering chambers

    doAll = fv->next();
  }

}

---

Member Data Documentation

const std::string CSCGeometryBuilderFromDDD::myName [private]

Definition at line 50 of file CSCGeometryBuilderFromDDD.h.

Referenced by buildChamber(), and buildEndcaps().

---

The documentation for this class was generated from the following files:

• Geometry/CSCGeometryBuilder/src/CSCGeometryBuilderFromDDD.h
• Geometry/CSCGeometryBuilder/src/CSCGeometryBuilderFromDDD.cc

---