define MonitorEnsembple to be used More...

#include <TopDiLeptonOfflineDQM.h>

Inheritance diagram for TopDiLeptonOfflineDQM:

Public Member Functions
virtual void	analyze (const edm::Event &event, const edm::EventSetup &setup)
	do this during the event loop More...

	TopDiLeptonOfflineDQM (const edm::ParameterSet &cfg)
	default constructor More...

	~TopDiLeptonOfflineDQM ()
	default destructor More...

Public Member Functions inherited from edm::EDAnalyzer
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

	EDAnalyzer ()

ModuleDescription const &	moduleDescription () const

std::string	workerType () const

virtual	~EDAnalyzer ()

Public Member Functions inherited from edm::EDConsumerBase
	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (const std::string &iProcessName, std::vector< const char * > &oModuleLabels) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Private Member Functions
std::string	objectType (const std::string &label)

std::string	selectionStep (const std::string &label)

Private Attributes
edm::EDGetTokenT< reco::BeamSpot >	beamspot_
	beamspot More...

StringCutObjectSelector < reco::BeamSpot > *	beamspotSelect_
	string cut selector More...

std::vector< SelectionStep < reco::CaloJet > * >	CaloJetSteps

SelectionStep < reco::PFCandidate > *	ElectronStep

std::vector< SelectionStep < reco::Jet > * >	JetSteps

SelectionStep< reco::MET > *	METStep

SelectionStep < reco::PFCandidate > *	MuonStep

std::vector< SelectionStep < reco::PFJet > * >	PFJetSteps

SelectionStep< reco::Vertex > *	PvStep

std::map< std::string, std::pair< edm::ParameterSet, TopDiLeptonOffline::MonitorEnsemble * > >	selection_

std::vector< std::string >	selectionOrder_

std::vector< std::string >	triggerPaths_
	trigger paths More...

edm::EDGetTokenT < edm::TriggerResults >	triggerTable_
	trigger table More...

edm::EDGetTokenT< std::vector < reco::Vertex > >	vertex_
	primary vertex More...

StringCutObjectSelector < reco::Vertex > *	vertexSelect_
	string cut selector More...

Additional Inherited Members
Public Types inherited from edm::EDAnalyzer
typedef EDAnalyzer	ModuleType

Static Public Member Functions inherited from edm::EDAnalyzer
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

define MonitorEnsembple to be used

Module to apply a monitored selection of top like events in the di-leptonic channel.

"DQM/Physics/plugins/TopDiLeptonOfflineDQM.h"

Plugin to apply a monitored selection of top like events with some minimal flexibility in the number and definition of the selection steps. To achieve this flexibility it employes the SelectionStep class. The MonitorEnsemble class is used to provide a well defined set of histograms to be monitored after each selection step. The SelectionStep class provides a flexible and intuitive selection via the StringCutParser. SelectionStep and MonitorEnsemble classes are interleaved. The monitoring starts after a preselection step (which is not monitored in the context of this module) with an instance of the MonitorEnsemble class. The following objects are supported for selection:

jets : of type reco::Jet
elecs : of type reco::PFCandidate
muons : of type reco::PFCandidate
met : of type reco::MET

These types have to be present as prefix of the selection step paramter label separated from the rest of the label by a ':' (e.g. in the form "jets:step0"). The class expects selection labels of this type. They will be disentangled by the private helper functions objectType and seletionStep as declared below.

Definition at line 322 of file TopDiLeptonOfflineDQM.h.

Constructor & Destructor Documentation

TopDiLeptonOfflineDQM::TopDiLeptonOfflineDQM ( const edm::ParameterSet & cfg )

default constructor

Definition at line 774 of file TopDiLeptonOfflineDQM.cc.

References beamspot_, beamspotSelect_, CaloJetSteps, edm::EDConsumerBase::consumesCollector(), ElectronStep, edm::ParameterSet::existsAs(), first, edm::ParameterSet::getParameter(), i, JetSteps, combine::key, METStep, MuonStep, objectType(), PFJetSteps, PvStep, EgammaValidation_Wenu_cff::sel, selection_, selectionOrder_, selectionStep(), AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, vertex_, and vertexSelect_.

     : vertexSelect_(0),
       beamspotSelect_(0),
       MuonStep(0),
       ElectronStep(0),
       PvStep(0),
       METStep(0) {
   JetSteps.clear();
   CaloJetSteps.clear();
   PFJetSteps.clear();
   // configure the preselection
   edm::ParameterSet presel =
       cfg.getParameter<edm::ParameterSet>("preselection");
   if (presel.existsAs<edm::ParameterSet>("trigger")) {
     edm::ParameterSet trigger =
         presel.getParameter<edm::ParameterSet>("trigger");
     //    triggerTable_=trigger.getParameter<edm::InputTag>("src");
     triggerTable_ = consumes<edm::TriggerResults>(
         trigger.getParameter<edm::InputTag>("src"));
     triggerPaths_ = trigger.getParameter<std::vector<std::string> >("select");
   }
   if (presel.existsAs<edm::ParameterSet>("vertex")) {
     edm::ParameterSet vertex = presel.getParameter<edm::ParameterSet>("vertex");
     vertex_ = consumes<std::vector<reco::Vertex> >(
         vertex.getParameter<edm::InputTag>("src"));
     vertexSelect_ = new StringCutObjectSelector<reco::Vertex>(
         vertex.getParameter<std::string>("select"));
   }
   if (presel.existsAs<edm::ParameterSet>("beamspot")) {
     edm::ParameterSet beamspot =
         presel.getParameter<edm::ParameterSet>("beamspot");
     beamspot_ =
         consumes<reco::BeamSpot>(beamspot.getParameter<edm::InputTag>("src"));
     beamspotSelect_ = new StringCutObjectSelector<reco::BeamSpot>(
         beamspot.getParameter<std::string>("select"));
   }
 
   // conifgure the selection
   std::vector<edm::ParameterSet> sel =
       cfg.getParameter<std::vector<edm::ParameterSet> >("selection");
   for (unsigned int i = 0; i < sel.size(); ++i) {
     selectionOrder_.push_back(sel.at(i).getParameter<std::string>("label"));
     selection_[selectionStep(selectionOrder_.back())] = std::make_pair(
         sel.at(i),
         new TopDiLeptonOffline::MonitorEnsemble(
             selectionStep(selectionOrder_.back()).c_str(),
             cfg.getParameter<edm::ParameterSet>("setup"), consumesCollector()));
   }
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "muons") {
         MuonStep = new SelectionStep<reco::PFCandidate>(selection_[key].first,
                                                         consumesCollector());
       }
       if (type == "elecs") {
         ElectronStep = new SelectionStep<reco::PFCandidate>(
             selection_[key].first, consumesCollector());
       }
       if (type == "pvs") {
         PvStep = new SelectionStep<reco::Vertex>(selection_[key].first,
                                                  consumesCollector());
       }
       if (type == "jets") {
         JetSteps.push_back(new SelectionStep<reco::Jet>(selection_[key].first,
                                                         consumesCollector()));
       }
       if (type == "jets/pf") {
         PFJetSteps.push_back(new SelectionStep<reco::PFJet>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "jets/calo") {
         CaloJetSteps.push_back(new SelectionStep<reco::CaloJet>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "met") {
         METStep = new SelectionStep<reco::MET>(selection_[key].first,
                                                consumesCollector());
       }
     }
   }
 }

TopDiLeptonOfflineDQM::~TopDiLeptonOfflineDQM ( )

inline

default destructor

Definition at line 327 of file TopDiLeptonOfflineDQM.h.

References beamspotSelect_, CaloJetSteps, ElectronStep, i, JetSteps, METStep, MuonStep, PFJetSteps, PvStep, and vertexSelect_.

                            {
     if (beamspotSelect_) delete beamspotSelect_;
     if (vertexSelect_) delete vertexSelect_;
 
     if (MuonStep) delete MuonStep;
 
     if (ElectronStep) delete ElectronStep;
 
     if (PvStep) delete PvStep;
 
     if (METStep) delete METStep;
 
     for (unsigned int i = 0; i < JetSteps.size(); i++)
 
       if (JetSteps[i]) delete JetSteps[i];
 
     for (unsigned int i = 0; i < CaloJetSteps.size(); i++)
 
       if (CaloJetSteps[i]) delete CaloJetSteps[i];
 
     for (unsigned int i = 0; i < PFJetSteps.size(); i++)
 
       if (PFJetSteps[i]) delete PFJetSteps[i];
   }

Member Function Documentation

void TopDiLeptonOfflineDQM::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

virtual

do this during the event loop

Implements edm::EDAnalyzer.

Definition at line 858 of file TopDiLeptonOfflineDQM.cc.

References accept(), beamspot_, beamspotSelect_, CaloJetSteps, ElectronStep, edm::Event::getByToken(), edm::EDGetTokenT< T >::isUninitialized(), JetSteps, combine::key, METStep, MuonStep, NULL, objectType(), PFJetSteps, benchmark_cfg::select, SelectionStep< Object >::select(), selection_, selectionOrder_, selectionStep(), AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, and vertex_.

                                                                 {
   if (!triggerTable_.isUninitialized()) {
     edm::Handle<edm::TriggerResults> triggerTable;
     if (!event.getByToken(triggerTable_, triggerTable)) return;
     if (!accept(event, *triggerTable, triggerPaths_)) return;
   }
   if (!vertex_.isUninitialized()) {
     edm::Handle<std::vector<reco::Vertex> > vertex;
     if (!event.getByToken(vertex_, vertex)) return;
     if (vertex->empty() || !(*vertexSelect_)(vertex->front())) return;
   }
   if (!beamspot_.isUninitialized()) {
     edm::Handle<reco::BeamSpot> beamspot;
     if (!event.getByToken(beamspot_, beamspot)) return;
     if (!(*beamspotSelect_)(*beamspot)) return;
   }
   unsigned int passed = 0;
 
   unsigned int nJetSteps = -1;
 
   unsigned int nPFJetSteps = -1;
 
   unsigned int nCaloJetSteps = -1;
   // apply selection steps
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "empty") {
         selection_[key].second->fill(event, setup);
       }
       if (type == "muons" && MuonStep != 0) {
         if (MuonStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "elecs" && ElectronStep != 0) {
         if (ElectronStep->select(event, "electron")) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
       if (type == "jets" && JetSteps.size() != 0) {
         nJetSteps++;
         if (JetSteps[nJetSteps] != NULL) {
           if (JetSteps[nJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "jets/pf" && PFJetSteps.size() != 0) {
         nPFJetSteps++;
         if (PFJetSteps[nPFJetSteps] != NULL) {
           if (PFJetSteps[nPFJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "jets/calo" && CaloJetSteps.size() != 0) {
         nCaloJetSteps++;
         if (CaloJetSteps[nCaloJetSteps] != NULL) {
           if (CaloJetSteps[nCaloJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "met" && METStep != 0) {
         ++passed;
         if (METStep->select(event)) {
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
     }
   }
 }

std::string TopDiLeptonOfflineDQM::objectType ( const std::string & label )

inlineprivate

deduce object type from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 358 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

                                                {
     return label.substr(0, label.find(':'));
   };

std::string TopDiLeptonOfflineDQM::selectionStep ( const std::string & label )

inlineprivate

deduce selection step from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 363 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

                                                   {
     return label.substr(label.find(':') + 1);
   };

Member Data Documentation

edm::EDGetTokenT<reco::BeamSpot> TopDiLeptonOfflineDQM::beamspot_

private

beamspot

Definition at line 377 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

StringCutObjectSelector<reco::BeamSpot>* TopDiLeptonOfflineDQM::beamspotSelect_

private

string cut selector

Definition at line 379 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

std::vector<SelectionStep<reco::CaloJet>*> TopDiLeptonOfflineDQM::CaloJetSteps

private

Definition at line 397 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

SelectionStep<reco::PFCandidate>* TopDiLeptonOfflineDQM::ElectronStep

private

Definition at line 393 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

std::vector<SelectionStep<reco::Jet>*> TopDiLeptonOfflineDQM::JetSteps

private

Definition at line 396 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

SelectionStep<reco::MET>* TopDiLeptonOfflineDQM::METStep

private

Definition at line 395 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

SelectionStep<reco::PFCandidate>* TopDiLeptonOfflineDQM::MuonStep

private

Definition at line 392 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

std::vector<SelectionStep<reco::PFJet>*> TopDiLeptonOfflineDQM::PFJetSteps

private

Definition at line 398 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

SelectionStep<reco::Vertex>* TopDiLeptonOfflineDQM::PvStep

private

Definition at line 394 of file TopDiLeptonOfflineDQM.h.

Referenced by TopDiLeptonOfflineDQM(), and ~TopDiLeptonOfflineDQM().

std::map<std::string, std::pair<edm::ParameterSet, TopDiLeptonOffline::MonitorEnsemble*> > TopDiLeptonOfflineDQM::selection_

private

this is the heart component of the plugin; std::string keeps a label the selection step for later identification, edm::ParameterSet keeps the configuration of the selection for the SelectionStep class, MonitoringEnsemble keeps an instance of the MonitorEnsemble class to be filled after each selection step

Definition at line 391 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::vector<std::string> TopDiLeptonOfflineDQM::selectionOrder_

private

needed to guarantee the selection order as defined by the order of ParameterSets in the selection vector as defined in the config

Definition at line 383 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().

std::vector<std::string> TopDiLeptonOfflineDQM::triggerPaths_

private

trigger paths

Definition at line 371 of file TopDiLeptonOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonOfflineDQM().