|
|
|
#include <EcalTBDaqFormatter.h>
Public Member Functions | |
| EcalTBDaqFormatter () | |
| void | interpretRawData (const FEDRawData &data, EBDigiCollection &digicollection, EcalPnDiodeDigiCollection &pndigicollection, EcalRawDataCollection &DCCheaderCollection, EBDetIdCollection &dccsizecollection, EcalElectronicsIdCollection &ttidcollection, EcalElectronicsIdCollection &blocksizecollection, EBDetIdCollection &chidcollection, EBDetIdCollection &gaincollection, EBDetIdCollection &gainswitchcollection, EcalElectronicsIdCollection &memttidcollection, EcalElectronicsIdCollection &memblocksizecollection, EcalElectronicsIdCollection &memgaincollection, EcalElectronicsIdCollection &memchidcollection, EcalTrigPrimDigiCollection &tpcollection) |
| virtual | ~EcalTBDaqFormatter () |
Private Types | |
| enum | SMElectronics_t { kSamplesPerChannel = 10, kSamplesPerPn = 50, kChannelsPerTower = 25, kStripsPerTower = 5, kChannelsPerStrip = 5, kPnPerTowerBlock = 5, kTriggerTowersAndMem = 70 } |
| enum | SMGeom_t { kModules = 4, kTriggerTowers = 68, kTowersInPhi = 4, kTowersInEta = 17, kCrystals = 1700, kPns = 10, kCrystalsInPhi = 20, kCrystalsInEta = 85, kCrystalsPerTower = 25, kCardsPerTower = 5, kChannelsPerCard = 5 } |
Private Member Functions | |
| std::pair< int, int > | cellIndex (int tower_id, int strip, int xtal) |
| int | cryIc (int tower_id, int strip, int xtal) |
| void | DecodeMEM (DCCTBTowerBlock *towerblock, EcalPnDiodeDigiCollection &pndigicollection, EcalElectronicsIdCollection &memttidcollection, EcalElectronicsIdCollection &memblocksizecollection, EcalElectronicsIdCollection &memgaincollection, EcalElectronicsIdCollection &memchidcollection) |
| bool | leftTower (int tower) const |
| bool | rightTower (int tower) const |
Private Attributes | |
| unsigned | _ExpectedTowers [71] |
| unsigned | _expTowersIndex |
| unsigned | _numExpectedTowers |
| int | data_MEM [500] |
| int | memRawSample_ [kStripsPerTower][kChannelsPerStrip][kSamplesPerChannel+1] |
| bool | pnAllocated |
| bool | pnIsOkInBlock [kPnPerTowerBlock] |
| DCCTBDataParser * | theParser_ |
enum EcalTBDaqFormatter::SMElectronics_t [private] |
| kSamplesPerChannel | |
| kSamplesPerPn | |
| kChannelsPerTower | |
| kStripsPerTower | |
| kChannelsPerStrip | |
| kPnPerTowerBlock | |
| kTriggerTowersAndMem |
Definition at line 75 of file EcalTBDaqFormatter.h.
{
kSamplesPerChannel = 10, // Number of sample per channel, per event
kSamplesPerPn = 50, // Number of sample per PN, per event
kChannelsPerTower = 25, // Number of channels per trigger tower
kStripsPerTower = 5, // Number of VFE cards per trigger tower
kChannelsPerStrip = 5, // Number channels per VFE card
kPnPerTowerBlock = 5, // Number Pn diodes pertaining to 1 tower block = 1/2 mem box
kTriggerTowersAndMem = 70 // Number of trigger towers block including mems
};
enum EcalTBDaqFormatter::SMGeom_t [private] |
| kModules | |
| kTriggerTowers | |
| kTowersInPhi | |
| kTowersInEta | |
| kCrystals | |
| kPns | |
| kCrystalsInPhi | |
| kCrystalsInEta | |
| kCrystalsPerTower | |
| kCardsPerTower | |
| kChannelsPerCard |
Definition at line 61 of file EcalTBDaqFormatter.h.
{
kModules = 4, // Number of modules per supermodule
kTriggerTowers = 68, // Number of trigger towers per supermodule
kTowersInPhi = 4, // Number of trigger towers in phi
kTowersInEta = 17, // Number of trigger towers in eta
kCrystals = 1700, // Number of crystals per supermodule
kPns = 10, // Number of PN laser monitoring diodes per supermodule
kCrystalsInPhi = 20, // Number of crystals in phi
kCrystalsInEta = 85, // Number of crystals in eta
kCrystalsPerTower = 25, // Number of crystals per trigger tower
kCardsPerTower = 5, // Number of VFE cards per trigger tower
kChannelsPerCard = 5 // Number of channels per VFE card
};
| EcalTBDaqFormatter::EcalTBDaqFormatter | ( | ) |
Definition at line 33 of file EcalTBDaqFormatter.cc.
References LogDebug, Parameters::parameters, and theParser_.
{
LogDebug("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter";
std::vector<uint32_t> parameters;
parameters.push_back(10); // parameters[0] is the xtal samples
parameters.push_back(1); // parameters[1] is the number of trigger time samples for TPG's
parameters.push_back(68); // parameters[2] is the number of TT
parameters.push_back(68); // parameters[3] is the number of SR Flags
parameters.push_back(1); // parameters[4] is the dcc id
parameters.push_back(1); // parameters[5] is the sr id
parameters.push_back(1); // parameters[6] is the tcc1 id
parameters.push_back(2); // parameters[7] is the tcc2 id
parameters.push_back(3); // parameters[8] is the tcc3 id
parameters.push_back(4); // parameters[9] is the tcc4 id
theParser_ = new DCCTBDataParser(parameters);
}
| virtual EcalTBDaqFormatter::~EcalTBDaqFormatter | ( | ) | [inline, virtual] |
Definition at line 34 of file EcalTBDaqFormatter.h.
References LogDebug.
{LogDebug("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter" << "\n"; };
| std::pair< int, int > EcalTBDaqFormatter::cellIndex | ( | int | tower_id, |
| int | strip, | ||
| int | xtal | ||
| ) | [private] |
Definition at line 832 of file EcalTBDaqFormatter.cc.
References eta(), kCardsPerTower, kChannelsPerCard, kCrystalsPerTower, kTowersInPhi, phi, and rightTower().
Referenced by cryIc().
{
int xtal= (strip-1)*5+ch-1;
// std::cout << " cellIndex input xtal " << xtal << std::endl;
std::pair<int,int> ind;
int eta = (tower_id - 1)/kTowersInPhi*kCardsPerTower;
int phi = (tower_id - 1)%kTowersInPhi*kChannelsPerCard;
if (rightTower(tower_id))
eta += xtal/kCardsPerTower;
else
eta += (kCrystalsPerTower - 1 - xtal)/kCardsPerTower;
if ((rightTower(tower_id) && (xtal/kCardsPerTower)%2 == 1) ||
(!rightTower(tower_id) && (xtal/kCardsPerTower)%2 == 0))
phi += (kChannelsPerCard - 1 - xtal%kChannelsPerCard);
else
phi += xtal%kChannelsPerCard;
ind.first =eta+1;
ind.second=phi+1;
// std::cout << " EcalTBDaqFormatter::cell_index eta " << ind.first << " phi " << ind.second << " " << std::endl;
return ind;
}
| int EcalTBDaqFormatter::cryIc | ( | int | tower_id, |
| int | strip, | ||
| int | xtal | ||
| ) | [private] |
Definition at line 865 of file EcalTBDaqFormatter.cc.
References cellIndex(), and kCrystalsInPhi.
Referenced by interpretRawData().
{
if ( strip < 1 || 5<strip || ch <1 || 5 < ch || 68<tower)
{
edm::LogWarning("EcalTBRawToDigiChId") << "EcalTBDaqFormatter::interpretRawData (cryIc) "
<< " wrong channel id, since out of range: "
<< "\t strip: " << strip << "\t channel: " << ch
<< "\t in TT: " << tower;
return -1;
}
std::pair<int,int> cellInd= EcalTBDaqFormatter::cellIndex(tower, strip, ch);
return cellInd.second + (cellInd.first-1)*kCrystalsInPhi;
}
| void EcalTBDaqFormatter::DecodeMEM | ( | DCCTBTowerBlock * | towerblock, |
| EcalPnDiodeDigiCollection & | pndigicollection, | ||
| EcalElectronicsIdCollection & | memttidcollection, | ||
| EcalElectronicsIdCollection & | memblocksizecollection, | ||
| EcalElectronicsIdCollection & | memgaincollection, | ||
| EcalElectronicsIdCollection & | memchidcollection | ||
| ) | [private] |
Definition at line 603 of file EcalTBDaqFormatter.cc.
References _ExpectedTowers, _expTowersIndex, edm::EDCollection< T >::begin(), data_MEM, edm::EDCollection< T >::end(), kChannelsPerStrip, kChannelsPerTower, kPnPerTowerBlock, kSamplesPerChannel, kSamplesPerPn, kStripsPerTower, LogDebug, memRawSample_, pnIsOkInBlock, edm::EDCollection< T >::push_back(), edm::SortedCollection< T, SORT >::push_back(), EcalPnDiodeDigi::setSample(), EcalPnDiodeDigi::setSize(), edm::EDCollection< T >::size(), strip(), DCCTBTowerBlock::towerID(), and DCCTBTowerBlock::xtalBlocks().
Referenced by interpretRawData().
{
LogDebug("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter::DecodeMEM"
<< "in mem " << towerblock->towerID();
int tower_id = towerblock ->towerID() ;
int mem_id = tower_id-69;
// initializing container
for (int st_id=0; st_id< kStripsPerTower; st_id++){
for (int ch_id=0; ch_id<kChannelsPerStrip; ch_id++){
for (int sa=0; sa<11; sa++){
memRawSample_[st_id][ch_id][sa] = -1;} } }
// check that tower block id corresponds to mem boxes
if(tower_id != 69 && tower_id != 70)
{
edm::LogWarning("EcalTBRawToDigiTowerId") << "@SUB=EcalTBDaqFormatter:decodeMem"
<< "DecodeMEM: this is not a mem box tower (" << tower_id << ")";
++ _expTowersIndex;
return;
}
/******************************************************************************
// getting the raw hits from towerBlock while checking tt and ch data structure
******************************************************************************/
std::vector<DCCTBXtalBlock *> & dccXtalBlocks = towerblock->xtalBlocks();
std::vector<DCCTBXtalBlock*>::iterator itXtal;
// checking mem tower block fo size
if (dccXtalBlocks.size() != kChannelsPerTower)
{
LogDebug("EcalTBRawToDigiDccBlockSize") << "@SUB=EcalTBDaqFormatter:decodeMem"
<< " wrong dccBlock size, namely: " << dccXtalBlocks.size()
<< ", for mem " << _ExpectedTowers[_expTowersIndex];
// reporting mem-tt block size problem
// chosing channel 1 as representative as a dummy...
EcalElectronicsId id(1, (int)_ExpectedTowers[_expTowersIndex], 1, 1);
memblocksizecollection.push_back(id);
++ _expTowersIndex;
return; // if mem tt block size not ok - do not build any Pn digis
}
// loop on channels of the mem block
int cryCounter = 0; int strip_id = 0; int xtal_id = 0;
for ( itXtal = dccXtalBlocks.begin(); itXtal < dccXtalBlocks.end(); itXtal++ ) {
strip_id = (*itXtal) ->getDataField("STRIP ID");
xtal_id = (*itXtal) ->getDataField("XTAL ID");
int wished_strip_id = cryCounter/ kStripsPerTower;
int wished_ch_id = cryCounter% kStripsPerTower;
if( (wished_strip_id+1) != ((int)strip_id) ||
(wished_ch_id+1) != ((int)xtal_id) )
{
LogDebug("EcalTBRawToDigiChId") << "@SUB=EcalTBDaqFormatter:decodeMem"
<< " in mem " << towerblock->towerID()
<< ", expected:\t strip"
<< (wished_strip_id+1) << " cry " << (wished_ch_id+1) << "\tfound: "
<< " strip " << strip_id << " cry " << xtal_id;
// report on crystal with unexpected indices
EcalElectronicsId id(1, (int)_ExpectedTowers[_expTowersIndex], wished_strip_id, wished_ch_id);
memchidcollection.push_back(id);
}
// Accessing the 10 time samples per Xtal:
memRawSample_[wished_strip_id][wished_ch_id][1] = (*itXtal)->getDataField("ADC#1");
memRawSample_[wished_strip_id][wished_ch_id][2] = (*itXtal)->getDataField("ADC#2");
memRawSample_[wished_strip_id][wished_ch_id][3] = (*itXtal)->getDataField("ADC#3");
memRawSample_[wished_strip_id][wished_ch_id][4] = (*itXtal)->getDataField("ADC#4");
memRawSample_[wished_strip_id][wished_ch_id][5] = (*itXtal)->getDataField("ADC#5");
memRawSample_[wished_strip_id][wished_ch_id][6] = (*itXtal)->getDataField("ADC#6");
memRawSample_[wished_strip_id][wished_ch_id][7] = (*itXtal)->getDataField("ADC#7");
memRawSample_[wished_strip_id][wished_ch_id][8] = (*itXtal)->getDataField("ADC#8");
memRawSample_[wished_strip_id][wished_ch_id][9] = (*itXtal)->getDataField("ADC#9");
memRawSample_[wished_strip_id][wished_ch_id][10] = (*itXtal)->getDataField("ADC#10");
cryCounter++;
}// end loop on crystals of mem dccXtalBlock
// tower accepted and digi read from all 25 channels.
// Increase counter of expected towers before unpacking in the 5 PNs
++ _expTowersIndex;
/************************************************************
// unpacking and 'cooking' the raw numbers to get PN sample
************************************************************/
int tempSample=0;
int memStoreIndex=0;
int ipn=0;
for (memStoreIndex=0; memStoreIndex<500; memStoreIndex++) {
data_MEM[memStoreIndex]= -1; }
for(int strip=0; strip<kStripsPerTower; strip++) {// loop on strips
for(int channel=0; channel<kChannelsPerStrip; channel++) {// loop on channels
if(strip%2 == 0)
{ipn= mem_id*5+channel;}
else
{ipn=mem_id*5+4-channel;}
for(int sample=0;sample< kSamplesPerChannel ;sample++) {
tempSample= memRawSample_[strip][channel][sample+1];
int new_data=0;
if(strip%2 == 1) {
// 1) if strip number is even, 14 bits are reversed in order
for(int ib=0;ib<14;ib++)
{
new_data <<= 1;
new_data=new_data | (tempSample&1);
tempSample >>= 1;
}
} else {
new_data=tempSample;
}
// 2) flip 11th bit for AD9052 still there on MEM !
// 3) mask with 1 1111 1111 1111
new_data = (new_data ^ 0x800) & 0x3fff; // (new_data XOR 1000 0000 0000) & 11 1111 1111 1111
// new_data = (new_data ^ 0x800) & 0x1fff; // (new_data XOR 1000 0000 0000) & 1 1111 1111 1111
//(Bit 12) == 1 -> Gain 16; (Bit 12) == 0 -> Gain 1
// gain in mem can be 1 or 16 encoded resp. with 0 ir 1 in the 13th bit.
// checking and reporting if there is any sample with gain==2,3
short sampleGain = (new_data &0x3000)/4096;
if ( sampleGain==2 || sampleGain==3)
{
EcalElectronicsId id(1, (int)_ExpectedTowers[_expTowersIndex], strip, channel);
memgaincollection.push_back(id);
edm::LogWarning("EcalTBRawToDigiGainZero") << "@SUB=EcalTBDaqFormatter:decodeMem"
<< "in mem " << towerblock->towerID()
<< " :\t strip: "
<< (strip +1) << " cry: " << (channel+1)
<< " has 14th bit non zero! Gain results: "
<< sampleGain << ".";
continue;
}// end 'if gain is zero'
memStoreIndex= ipn*50+strip*kSamplesPerChannel+sample;
// storing in data_MEM also the gain bits
data_MEM[memStoreIndex]= new_data & 0x3fff;
}// loop on samples
}// loop on strips
}// loop on channels
for (int pnId=0; pnId<kPnPerTowerBlock; pnId++) pnIsOkInBlock[pnId]=true;
// if anything was wrong with mem_tt_id or mem_tt_size: you would have already exited
// otherwise, if any problem with ch_gain or ch_id: must not produce digis for the pertaining Pn
if (! (memgaincollection.size()==0 && memchidcollection.size()==0) )
{
for ( EcalElectronicsIdCollection::const_iterator idItr = memgaincollection.begin();
idItr != memgaincollection.end();
++ idItr ) {
int ch = (*idItr).channelId();
ch = (ch-1)/5;
pnIsOkInBlock [ch] = false;
}
for ( EcalElectronicsIdCollection::const_iterator idItr = memchidcollection.begin();
idItr != memchidcollection.end();
++ idItr ) {
int ch = (*idItr).channelId();
ch = (ch-1)/5;
pnIsOkInBlock [ch] = false;
}
}// end: if any ch_gain or ch_id problems exclude the Pn's from digi production
// looping on PN's of current mem box
for (int pnId = 1; pnId < (kPnPerTowerBlock+1); pnId++){
// if present Pn has any of its 5 channels with problems, do not produce digi for it
if (! pnIsOkInBlock [pnId-1] ) continue;
// DccId set to 28 to be consistent with ism==1
EcalPnDiodeDetId PnId(1, 28, pnId + kPnPerTowerBlock*mem_id);
EcalPnDiodeDigi thePnDigi(PnId );
thePnDigi.setSize(kSamplesPerPn);
for (int sample =0; sample<kSamplesPerPn; sample++)
{
EcalFEMSample thePnSample( data_MEM[(mem_id)*250 + (pnId-1)*kSamplesPerPn + sample ] );
thePnDigi.setSample(sample, thePnSample );
}
pndigicollection.push_back(thePnDigi);
}
}
| void EcalTBDaqFormatter::interpretRawData | ( | const FEDRawData & | data, |
| EBDigiCollection & | digicollection, | ||
| EcalPnDiodeDigiCollection & | pndigicollection, | ||
| EcalRawDataCollection & | DCCheaderCollection, | ||
| EBDetIdCollection & | dccsizecollection, | ||
| EcalElectronicsIdCollection & | ttidcollection, | ||
| EcalElectronicsIdCollection & | blocksizecollection, | ||
| EBDetIdCollection & | chidcollection, | ||
| EBDetIdCollection & | gaincollection, | ||
| EBDetIdCollection & | gainswitchcollection, | ||
| EcalElectronicsIdCollection & | memttidcollection, | ||
| EcalElectronicsIdCollection & | memblocksizecollection, | ||
| EcalElectronicsIdCollection & | memgaincollection, | ||
| EcalElectronicsIdCollection & | memchidcollection, | ||
| EcalTrigPrimDigiCollection & | tpcollection | ||
| ) |
Definition at line 52 of file EcalTBDaqFormatter.cc.
References _ExpectedTowers, _expTowersIndex, _numExpectedTowers, edm::DataFrameContainer::back(), cryIc(), FEDRawData::data(), DCCTBDataParser::dccEvents(), EcalDCCTBHeaderRuntypeDecoder::Decode(), DecodeMEM(), EcalBarrel, first, i, kChannelsPerCard, kChannelsPerStrip, kChannelsPerTower, kCrystals, kPns, kStripsPerTower, kTowersInPhi, kTriggerTowers, kTriggerTowersAndMem, LogDebug, MAX_TCC_SIZE, MAX_TT_SIZE, DCCTBDataParser::parseBuffer(), pnAllocated, edm::DataFrameContainer::pop_back(), edm::DataFrameContainer::push_back(), edm::SortedCollection< T, SORT >::push_back(), edm::EDCollection< T >::push_back(), edm::SortedCollection< T, SORT >::reserve(), edm::DataFrameContainer::reserve(), edm::second(), EcalDCCHeaderBlock::setBasicTriggerType(), EcalDCCHeaderBlock::setBX(), EcalDCCHeaderBlock::setErrors(), EcalDCCHeaderBlock::setFedId(), EcalDCCHeaderBlock::setFEStatus(), EcalDCCHeaderBlock::setId(), EcalDCCHeaderBlock::setLV1(), EcalDCCHeaderBlock::setOrbit(), EcalDCCHeaderBlock::setRunNumber(), EcalTriggerPrimitiveDigi::setSample(), EcalDataFrame::setSample(), EcalDCCHeaderBlock::setSelectiveReadout(), EcalTriggerPrimitiveDigi::setSize(), EcalDCCHeaderBlock::setSrpStatus(), EcalDCCHeaderBlock::setTccStatus(), EcalDCCHeaderBlock::setTestZeroSuppression(), EcalDCCHeaderBlock::setZeroSuppression(), FEDRawData::size(), strip(), theParser_, and v.
Referenced by EcalDCCTBUnpackingModule::produce().
{
const unsigned char * pData = fedData.data();
int length = fedData.size();
bool shit=true;
unsigned int tower=0;
int ch=0;
int strip=0;
LogDebug("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "size " << length;
// mean + 3sigma estimation needed when switching to 0suppressed data
digicollection.reserve(kCrystals);
pnAllocated = false;
theParser_->parseBuffer( reinterpret_cast<uint32_t*>(const_cast<unsigned char*>(pData)), static_cast<uint32_t>(length), shit );
std::vector< DCCTBEventBlock * > & dccEventBlocks = theParser_->dccEvents();
// Access each DCCTB block
for( std::vector< DCCTBEventBlock * >::iterator itEventBlock = dccEventBlocks.begin();
itEventBlock != dccEventBlocks.end();
itEventBlock++){
bool _displayParserMessages = false;
if( (*itEventBlock)->eventHasErrors() && _displayParserMessages)
{
edm::LogWarning("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "errors found from parser... ";
edm::LogWarning("EcalTBRawToDigi") << (*itEventBlock)->eventErrorString();
edm::LogWarning("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "... errors from parser notified";
}
// getting the fields of the DCC header
EcalDCCHeaderBlock theDCCheader;
theDCCheader.setId(28); // tb unpacker: forced to 28 to get first geom slot in EB
int fedId = (*itEventBlock)->getDataField("FED/DCC ID");
theDCCheader.setFedId( fedId ); // fed id as found in raw data (0... 35 at tb )
theDCCheader.setRunNumber((*itEventBlock)->getDataField("RUN NUMBER"));
short trigger_type = (*itEventBlock)->getDataField("TRIGGER TYPE");
short zs = (*itEventBlock)->getDataField("ZS");
short tzs = (*itEventBlock)->getDataField("TZS");
short sr = (*itEventBlock)->getDataField("SR");
bool dataIsSuppressed;
// if zs&&tzs the suppression algo is used in DCC, the data are not suppressed and zs-bits are set
if ( zs && !(tzs) ) dataIsSuppressed = true;
else dataIsSuppressed = false;
if(trigger_type >0 && trigger_type <5){theDCCheader.setBasicTriggerType(trigger_type);}
else{ edm::LogWarning("EcalTBRawToDigiTriggerType") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "unrecognized TRIGGER TYPE: "<<trigger_type;}
theDCCheader.setLV1((*itEventBlock)->getDataField("LV1"));
theDCCheader.setOrbit((*itEventBlock)->getDataField("ORBIT COUNTER"));
theDCCheader.setBX((*itEventBlock)->getDataField("BX"));
theDCCheader.setErrors((*itEventBlock)->getDataField("DCC ERRORS"));
theDCCheader.setSelectiveReadout( sr );
theDCCheader.setZeroSuppression( zs );
theDCCheader.setTestZeroSuppression( tzs );
theDCCheader.setSrpStatus((*itEventBlock)->getDataField("SR_CHSTATUS"));
std::vector<short> theTCCs;
for(int i=0; i<MAX_TCC_SIZE; i++){
char TCCnum[20]; sprintf(TCCnum,"TCC_CHSTATUS#%d",i+1); std::string TCCnumS(TCCnum);
theTCCs.push_back ((*itEventBlock)->getDataField(TCCnumS) );
}
theDCCheader.setTccStatus(theTCCs);
std::vector< DCCTBTCCBlock * > tccBlocks = (*itEventBlock)->tccBlocks();
for( std::vector< DCCTBTCCBlock * >::iterator itTCCBlock = tccBlocks.begin();
itTCCBlock != tccBlocks.end();
itTCCBlock ++)
{
std::vector< std::pair<int,bool> > TpSamples = (* itTCCBlock) -> triggerSamples() ;
// std::vector of 3 bits
std::vector<int> TpFlags = (* itTCCBlock) -> triggerFlags() ;
// there have always to be 68 primitives and flags, per FED
if (TpSamples.size()==68 && TpFlags.size()==68)
{
for(int i=0; i<((int)TpSamples.size()); i++)
{
int etaTT = (i) / kTowersInPhi +1;
int phiTT = (i) % kTowersInPhi +1;
// follow HB convention in iphi
phiTT=3-phiTT;
if(phiTT<=0)phiTT=phiTT+72;
EcalTriggerPrimitiveSample theSample(TpSamples[i].first, TpSamples[i].second, TpFlags[i]);
EcalTrigTowerDetId idtt(1, EcalBarrel, etaTT, phiTT, 0);
EcalTriggerPrimitiveDigi thePrimitive(idtt);
thePrimitive.setSize(1); // hard coded
thePrimitive.setSample(0, theSample);
tpcollection.push_back(thePrimitive);
LogDebug("EcalTBRawToDigiTpg") << "@SUBS=EcalTBDaqFormatter::interpretRawData"
<< "tower: " << (i+1)
<< " primitive: " << TpSamples[i].first
<< " flag: " << TpSamples[i].second;
LogDebug("EcalTBRawToDigiTpg") << "@SUBS=EcalTBDaqFormatter::interpretRawData"<<
"tower: " << (i+1) << " flag: " << TpFlags[i];
}// end loop on tower primitives
}// end if
else
{
edm::LogWarning("EcalTBRawToDigiTpg") << "68 elements not found for TpFlags or TpSamples, collection will be empty";
}
}
short TowerStatus[MAX_TT_SIZE+1];
char buffer[20];
std::vector<short> theTTstatus;
for(int i=1;i<MAX_TT_SIZE+1;i++)
{
sprintf(buffer, "FE_CHSTATUS#%d", i);
std::string Tower(buffer);
TowerStatus[i]= (*itEventBlock)->getDataField(Tower);
theTTstatus.push_back(TowerStatus[i]);
//std::cout << "tower " << i << " has status " << TowerStatus[i] << std::endl;
}
theDCCheader.setFEStatus(theTTstatus);
EcalDCCTBHeaderRuntypeDecoder theRuntypeDecoder;
uint32_t DCCruntype = (*itEventBlock)->getDataField("RUN TYPE");
theRuntypeDecoder.Decode(DCCruntype, &theDCCheader);
//DCCHeader filled!
DCCheaderCollection.push_back(theDCCheader);
std::vector< DCCTBTowerBlock * > dccTowerBlocks = (*itEventBlock)->towerBlocks();
LogDebug("EcalTBRawToDigi") << "@SUBS=EcalTBDaqFormatter::interpretRawData"
<< "dccTowerBlocks size " << dccTowerBlocks.size();
_expTowersIndex=0;_numExpectedTowers=0;
for (int v=0; v<71; v++){
_ExpectedTowers[v]=99999;
}
// note: these are the tower statuses handled at the moment - to be completed
// staus==0: tower expected;
// staus==9: Synk error LV1, tower expected;
// staus==10: Synk error BX, tower expected;
// status==1, 2, 3, 4, 5: tower not expected
for (int u=1; u< (kTriggerTowersAndMem+1); u++)
{
if( TowerStatus[u] ==0 || TowerStatus[u] ==9 || TowerStatus[u] ==10 )
{_ExpectedTowers[_expTowersIndex]=u;
_expTowersIndex++;
_numExpectedTowers++;
}
}
// resetting counter of expected towers
_expTowersIndex=0;
// if number of dccEventBlocks NOT same as expected stop
if (! (dccTowerBlocks.size() == _numExpectedTowers) )
{
// we probably always want to know if this happens
edm::LogWarning("EcalTBRawToDigiNumTowerBlocks") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "number of TowerBlocks found (" << dccTowerBlocks.size()
<< ") differs from expected (" << _numExpectedTowers
<< ") skipping event";
EBDetId idsm(1, 1);
dccsizecollection.push_back(idsm);
return;
}
// Access the Tower block
for( std::vector< DCCTBTowerBlock * >::iterator itTowerBlock = dccTowerBlocks.begin();
itTowerBlock!= dccTowerBlocks.end();
itTowerBlock++){
tower=(*itTowerBlock)->towerID();
// checking if tt in data is the same as tt expected
// else skip tower and increment problem counter
// compute eta/phi in order to have iTT = _ExpectedTowers[_expTowersIndex]
// for the time being consider only zside>0
EcalElectronicsId idtt(28, _ExpectedTowers[_expTowersIndex], 1, 1);
if ( !(tower == _ExpectedTowers[_expTowersIndex]) )
{
if (_ExpectedTowers[_expTowersIndex] <= 68){
edm::LogWarning("EcalTBRawToDigiTowerId") << "@SUBS=EcalTBDaqFormatter::interpretRawData"
<< "TTower id found (=" << tower
<< ") different from expected (=" << _ExpectedTowers[_expTowersIndex]
<< ") " << (_expTowersIndex+1) << "-th tower checked";
// report on failed tt_id for regular tower block
ttidcollection.push_back(idtt);
}
else
{
edm::LogWarning("EcalTBRawToDigiTowerId") << "@SUB=EcalTBDaqFormatter:interpretRawData"
<< "DecodeMEM: tower " << tower
<< " is not the same as expected " << ((int)_ExpectedTowers[_expTowersIndex])
<< " (according to DCC header channel status)";
// report on failed tt_id for mem tower block
// chosing channel 1 as representative
EcalElectronicsId id(1, (int)_ExpectedTowers[_expTowersIndex], 1, 1);
memttidcollection.push_back(id);
}
++ _expTowersIndex;
continue;
}// if TT id found different than expected
/*********************************
// tt: 1 ... 68: crystal data
*********************************/
if ( 0< (*itTowerBlock)->towerID() &&
(*itTowerBlock)->towerID() < (kTriggerTowers+1) )
{
std::vector<DCCTBXtalBlock * > & xtalDataBlocks = (*itTowerBlock)->xtalBlocks();
// if there is no zero suppression, tower block must have have 25 channels in it
if ( (!dataIsSuppressed) && (xtalDataBlocks.size() != kChannelsPerTower) )
{
edm::LogWarning("EcalTBRawToDigiTowerSize") << "EcalTBDaqFormatter::interpretRawData, no zero suppression "
<< "wrong tower block size is: " << xtalDataBlocks.size()
<< " at LV1 " << (*itEventBlock)->getDataField("LV1")
<< " for TT " << _ExpectedTowers[_expTowersIndex];
// report on wrong tt block size
blocksizecollection.push_back(idtt);
++ _expTowersIndex; continue;
}
short cryInTower =0;
short expStripInTower;
short expCryInStrip;
short expCryInTower =0;
// Access the Xstal data
for( std::vector< DCCTBXtalBlock * >::iterator itXtalBlock = xtalDataBlocks.begin();
itXtalBlock!= xtalDataBlocks.end();
itXtalBlock++){ //loop on crys of a tower
strip =(*itXtalBlock)->stripID();
ch =(*itXtalBlock)->xtalID();
cryInTower =(strip-1)* kChannelsPerCard + (ch -1);
expStripInTower = expCryInTower/5 +1;
expCryInStrip = expCryInTower%5 +1;
// FIXME: waiting for geometry to do (TT, strip,chNum) <--> (SMChId)
// short abscissa = (_ExpectedTowers[_expTowersIndex]-1) /4;
// short ordinate = (_ExpectedTowers[_expTowersIndex]-1) %4;
// temporarily choosing central crystal in trigger tower
// int cryIdInSM = 45 + ordinate*5 + abscissa * 100;
// in case of 0 zuppressed data, check that cryInTower constantly grows
if (dataIsSuppressed)
{
if ( strip < 1 || 5<strip || ch <1 || 5 < ch)
{
int sm = 1; // hardcoded because of test beam
for (int StripInTower_ =1; StripInTower_ < 6; StripInTower_++){
for (int CryInStrip_ =1; CryInStrip_ < 6; CryInStrip_++){
int ic = cryIc(tower, StripInTower_, CryInStrip_) ;
EBDetId idExp(sm, ic,1);
chidcollection.push_back(idExp);
}
}
edm::LogWarning("EcalTBRawToDigiChId") << "EcalTBDaqFormatter::interpretRawData with zero suppression, "
<< " wrong channel id, since out of range: "
<< "\t strip: " << strip << "\t channel: " << ch
<< "\t in TT: " << _ExpectedTowers[_expTowersIndex]
<< "\t at LV1 : " << (*itEventBlock)->getDataField("LV1");
expCryInTower++;
continue;
}
// correct ordering
if( cryInTower >= expCryInTower ){
expCryInTower = cryInTower +1;
}
// cry_id wrong because of incorrect ordering within trigger tower
else
{
edm::LogWarning("EcalTBRawToDigiChId") << "EcalTBDaqFormatter::interpretRawData with zero suppression, "
<< " based on ch ordering within tt, wrong channel id: "
<< "\t strip: " << strip << "\t channel: " << ch
<< "\t cryInTower " << cryInTower
<< "\t expCryInTower: " << expCryInTower
<< "\t in TT: " << _ExpectedTowers[_expTowersIndex]
<< "\t at LV1: " << (*itEventBlock)->getDataField("LV1");
int sm = 1; // hardcoded because of test beam
for (int StripInTower_ =1; StripInTower_ < 6; StripInTower_++){
for (int CryInStrip_ =1; CryInStrip_ < 6; CryInStrip_++){
int ic = cryIc(tower, StripInTower_, CryInStrip_) ;
EBDetId idExp(sm, ic,1);
chidcollection.push_back(idExp);
}
}
// chennel with id which does not follow correct odering
expCryInTower++; continue;
}// end 'ch_id does not respect growing order'
}// end if zero supression
else {
// checking that ch and strip are within range and cryInTower is as expected
if( cryInTower != expCryInTower ||
strip < 1 || kStripsPerTower <strip ||
ch <1 || kChannelsPerStrip < ch )
{
int ic = cryIc(tower, expStripInTower, expCryInStrip) ;
int sm = 1; // hardcoded because of test beam
EBDetId idExp(sm, ic,1);
edm::LogWarning("EcalTBRawToDigiChId") << "EcalTBDaqFormatter::interpretRawData no zero suppression "
<< " wrong channel id for channel: " << expCryInStrip
<< "\t strip: " << expStripInTower
<< "\t in TT: " << _ExpectedTowers[_expTowersIndex]
<< "\t at LV1: " << (*itEventBlock)->getDataField("LV1")
<< "\t (in the data, found channel: " << ch
<< "\t strip: " << strip << " ).";
// report on wrong channel id
chidcollection.push_back(idExp);
// there has been unexpected crystal id, dataframe not to go to the Event
expCryInTower++; continue;
} // if channel in data does not equal expected channel
expCryInTower++;
} // end 'not zero suppression'
// data to be stored in EBDataFrame, identified by EBDetId
int ic = cryIc(tower, strip, ch) ;
int sm = 1;
EBDetId id(sm, ic,1);
// here data frame go into the Event
// removed later on (with a pop_back()) if gain==0 or if forbidden-gain-switch
digicollection.push_back( id );
EBDataFrame theFrame ( digicollection.back() );
std::vector<int> xtalDataSamples = (*itXtalBlock)->xtalDataSamples();
//theFrame.setSize(xtalDataSamples.size()); // if needed, to be changed when constructing digicollection
// gain cannot be 0, checking for that
bool gainIsOk =true;
unsigned gain_mask = 12288; //12th and 13th bit
std::vector <int> xtalGain;
for (unsigned short i=0; i<xtalDataSamples.size(); ++i ) {
theFrame.setSample (i, xtalDataSamples[i] );
if((xtalDataSamples[i] & gain_mask) == 0){gainIsOk =false;}
xtalGain.push_back(0);
xtalGain[i] |= (xtalDataSamples[i] >> 12);
}
if (! gainIsOk) {
edm::LogWarning("EcalTBRawToDigiGainZero") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< " gain==0 for strip: " << expStripInTower
<< "\t channel: " << expCryInStrip
<< "\t in TT: " << _ExpectedTowers[_expTowersIndex]
<< "\t ic: " << ic
<< "\t at LV1: " << (*itEventBlock)->getDataField("LV1");
// report on gain==0
gaincollection.push_back(id);
// there has been a gain==0, dataframe not to go to the Event
digicollection.pop_back();
continue; // expCryInTower already incremented
}
// looking for forbidden gain transitions
short firstGainWrong=-1;
short numGainWrong=0;
for (unsigned short i=0; i<xtalGain.size(); i++ ) {
if (i>0 && xtalGain[i-1]>xtalGain[i]) {
numGainWrong++;// counting forbidden gain transitions
if (firstGainWrong == -1) {
firstGainWrong=i;
edm::LogWarning("EcalTBRawToDigiGainSwitch") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "channelHasGainSwitchProblem: crystal eta = "
<< id.ieta() << " phi = " << id.iphi();
}
edm::LogWarning("EcalTBRawToDigiGainSwitch") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "channelHasGainSwitchProblem: sample = " << (i-1)
<< " gain: " << xtalGain[i-1] << " sample: "
<< i << " gain: " << xtalGain[i];
}
}
if (numGainWrong>0) {
gainswitchcollection.push_back(id);
edm::LogWarning("EcalTBRawToDigiGainSwitch") << "@SUB=EcalTBDaqFormatter:interpretRawData"
<< "channelHasGainSwitchProblem: more than 1 wrong transition";
for (unsigned short i1=0; i1<xtalDataSamples.size(); ++i1 ) {
int countADC = 0x00000FFF;
countADC &= xtalDataSamples[i1];
LogDebug("EcalTBRawToDigi") << "Sample " << i1 << " ADC " << countADC << " Gain " << xtalGain[i1];
}
// there has been a forbidden gain transition, dataframe not to go to the Event
digicollection.pop_back();
continue; // expCryInTower already incremented
}// END of: 'if there is a forbidden gain transition'
}// end loop on crystals within a tower block
_expTowersIndex++;
}// end: tt1 ... tt68, crystal data
/******************************************************************
// tt 69 and 70: two mem boxes, holding PN0 ... PN9
******************************************************************/
else if ( (*itTowerBlock)->towerID() == 69
|| (*itTowerBlock)->towerID() == 70 )
{
LogDebug("EcalTBRawToDigi") << "@SUB=EcalTBDaqFormatter::interpretRawData"
<< "processing mem box num: " << (*itTowerBlock)->towerID();
// if tt 69 or 70 found, allocate Pn digi collection
if(! pnAllocated)
{
pndigicollection.reserve(kPns);
pnAllocated = true;
}
DecodeMEM( (*itTowerBlock), pndigicollection ,
memttidcollection, memblocksizecollection,
memgaincollection, memchidcollection);
}// end of < if it is a mem box>
// wrong tt id
else {
edm::LogWarning("EcalTBRawToDigiTowerId") <<"@SUB=EcalTBDaqFormatter::interpretRawData"
<< " processing tt with ID not existing ( "
<< (*itTowerBlock)->towerID() << ")";
++ _expTowersIndex;continue;
}// end: tt id error
}// end loop on trigger towers
}// end loop on events
}
| bool EcalTBDaqFormatter::leftTower | ( | int | tower | ) | const [private] |
Definition at line 893 of file EcalTBDaqFormatter.cc.
References rightTower().
{
return !rightTower(tower);
}
| bool EcalTBDaqFormatter::rightTower | ( | int | tower | ) | const [private] |
Definition at line 882 of file EcalTBDaqFormatter.cc.
Referenced by cellIndex(), and leftTower().
{
if ((tower>12 && tower<21) || (tower>28 && tower<37) ||
(tower>44 && tower<53) || (tower>60 && tower<69))
return true;
else
return false;
}
unsigned EcalTBDaqFormatter::_ExpectedTowers[71] [private] |
Definition at line 87 of file EcalTBDaqFormatter.h.
Referenced by DecodeMEM(), and interpretRawData().
unsigned EcalTBDaqFormatter::_expTowersIndex [private] |
Definition at line 88 of file EcalTBDaqFormatter.h.
Referenced by DecodeMEM(), and interpretRawData().
unsigned EcalTBDaqFormatter::_numExpectedTowers [private] |
Definition at line 86 of file EcalTBDaqFormatter.h.
Referenced by interpretRawData().
int EcalTBDaqFormatter::data_MEM[500] [private] |
Definition at line 92 of file EcalTBDaqFormatter.h.
Referenced by DecodeMEM().
int EcalTBDaqFormatter::memRawSample_[kStripsPerTower][kChannelsPerStrip][kSamplesPerChannel+1] [private] |
Definition at line 91 of file EcalTBDaqFormatter.h.
Referenced by DecodeMEM().
bool EcalTBDaqFormatter::pnAllocated [private] |
Definition at line 93 of file EcalTBDaqFormatter.h.
Referenced by interpretRawData().
bool EcalTBDaqFormatter::pnIsOkInBlock[kPnPerTowerBlock] [private] |
Definition at line 94 of file EcalTBDaqFormatter.h.
Referenced by DecodeMEM().
DCCTBDataParser* EcalTBDaqFormatter::theParser_ [private] |
Definition at line 59 of file EcalTBDaqFormatter.h.
Referenced by EcalTBDaqFormatter(), and interpretRawData().
1.7.3