#include <MuonDTLocalMillepedeAlgorithm.h>

Inheritance diagram for MuonDTLocalMillepedeAlgorithm:

Classes
struct	Info1D
Public Member Functions
void	initialize (const edm::EventSetup &setup, AlignableTracker tracker, AlignableMuon muon, AlignmentParameterStore *store)
	Call at beginning of job.
	MuonDTLocalMillepedeAlgorithm (const edm::ParameterSet &cfg)
	Constructor.
void	run (const edm::EventSetup &setup, const EventInfo &eventInfo)
	Run the algorithm on trajectories and tracks.
void	terminate (void)
	Call at end of job.
	~MuonDTLocalMillepedeAlgorithm ()
	Destructor.
Private Member Functions
bool	build4DSegments ()
void	setBranchTrees ()
Private Attributes
float	charge
edm::InputTag	consTraj
float	dxdzSl [MAX_SEGMENT]
float	dxdzSlSL1 [MAX_SEGMENT]
float	dxdzSlSL3 [MAX_SEGMENT]
float	dydzSl [MAX_SEGMENT]
float	edxdzSl [MAX_SEGMENT]
float	edxdzSlSL1 [MAX_SEGMENT]
float	edxdzSlSL3 [MAX_SEGMENT]
float	edydzSl [MAX_SEGMENT]
float	eta
float	ex [MAX_SEGMENT][MAX_HIT_CHAM]
float	excp [MAX_SEGMENT][MAX_HIT_CHAM]
float	exdxdzSl [MAX_SEGMENT]
float	exdxdzSlSL1 [MAX_SEGMENT]
float	exdxdzSlSL3 [MAX_SEGMENT]
float	exSl [MAX_SEGMENT]
float	exSlSL1 [MAX_SEGMENT]
float	exSlSL3 [MAX_SEGMENT]
float	eycp [MAX_SEGMENT][MAX_HIT_CHAM]
float	eydydzSl [MAX_SEGMENT]
float	eySl [MAX_SEGMENT]
TFile *	f
edm::Service< TFileService >	fs
edm::InputTag	globalTracks
int	la [MAX_SEGMENT][MAX_HIT_CHAM]
float	meandxdz [5][4][14]
float	meandydz [5][4][14]
float	meanx [5][4][14]
float	meany [5][4][14]
Info1D	myTrack1D
int	nhits [MAX_SEGMENT]
int	nMtxSection
int	nphihits [MAX_SEGMENT]
float	nPhihits
int	nseg
int	nthetahits [MAX_SEGMENT]
float	nThetahits
std::string	ntuplePath
int	numberOfRootFiles
float	numberOfSigmasDXDZ
float	numberOfSigmasDYDZ
float	numberOfSigmasX
float	numberOfSigmasY
float	p
float	phi
float	pt
float	ptMax
float	ptMin
float	sigmadxdz [5][4][14]
float	sigmadydz [5][4][14]
float	sigmax [5][4][14]
float	sigmay [5][4][14]
int	sl [MAX_SEGMENT][MAX_HIT_CHAM]
int	sr [MAX_SEGMENT]
int	st [MAX_SEGMENT]
TChain *	tali
AlignableNavigator *	theAlignableDetAccessor
std::vector< Alignable * >	theAlignables
AlignmentParameterStore *	theAlignmentParameterStore
TTree *	ttreeOutput
int	wh [MAX_SEGMENT]
int	workingmode
float	xc [MAX_SEGMENT][MAX_HIT_CHAM]
float	xcp [MAX_SEGMENT][MAX_HIT_CHAM]
float	xSl [MAX_SEGMENT]
float	xSL1SL3 [MAX_SEGMENT]
float	xSL3SL1 [MAX_SEGMENT]
float	xSlSL1 [MAX_SEGMENT]
float	xSlSL3 [MAX_SEGMENT]
float	yc [MAX_SEGMENT][MAX_HIT_CHAM]
float	ycp [MAX_SEGMENT][MAX_HIT_CHAM]
float	ySl [MAX_SEGMENT]
float	zc [MAX_SEGMENT][MAX_HIT_CHAM]

Detailed Description

Definition at line 30 of file MuonDTLocalMillepedeAlgorithm.h.

Constructor & Destructor Documentation

MuonDTLocalMillepedeAlgorithm::MuonDTLocalMillepedeAlgorithm ( const edm::ParameterSet & cfg )

Constructor.

Definition at line 41 of file MuonDTLocalMillepedeAlgorithm.cc.

References f, edm::ParameterSet::getParameter(), nMtxSection, nPhihits, nThetahits, ntuplePath, numberOfRootFiles, numberOfSigmasDXDZ, numberOfSigmasDYDZ, numberOfSigmasX, numberOfSigmasY, ptMax, ptMin, setBranchTrees(), and workingmode.

                                                                                      :
  AlignmentAlgorithmBase( cfg )
{
  
  edm::LogInfo("Alignment") << "[MuonDTLocalMillepedeAlgorithm] constructed.";

  //Parse parameters. In the future this section should be completed with more options
  ntuplePath = cfg.getParameter<std::string>( "ntuplePath" );
  numberOfRootFiles = cfg.getParameter<int>( "numberOfRootFiles" ); 
  ptMax = cfg.getParameter<double>( "ptMax" );
  ptMin = cfg.getParameter<double>( "ptMin" );
  numberOfSigmasX = cfg.getParameter<double>( "numberOfSigmasX" );
  numberOfSigmasDXDZ = cfg.getParameter<double>( "numberOfSigmasDXDZ" );
  numberOfSigmasY = cfg.getParameter<double>( "numberOfSigmasY" );
  numberOfSigmasDYDZ = cfg.getParameter<double>( "numberOfSigmasDYDZ" );
  nPhihits = cfg.getParameter<double>( "nPhihits" );
  nThetahits = cfg.getParameter<double>( "nThetahits" );
  workingmode = cfg.getParameter<int>( "workingMode" );
  nMtxSection = cfg.getParameter<int>( "nMtxSection" );

 
  //The algorithm has three working modes:
  //0.- aligment information is extracted from the events and stored in root files
  //1.- The SLtoSl algorithm
  //2.- The local MuonMillepede algorithm
  if(workingmode == 0) {
    edm::LogInfo("Alignment") << "[MuonDTLocalMillepedeAlgorithm] Running on production mode."; 
    char nameOfFile[200];
    sprintf(nameOfFile, "%s/MyNtupleResidual.root", ntuplePath.c_str());
    f = new TFile(nameOfFile, "RECREATE");
    f->cd();
    setBranchTrees();
  } else if (workingmode == 1) {
    edm::LogInfo("Alignment") << "[MuonDTLocalMillepedeAlgorithm] Running SLToSL algorithm."; 
  } else {
    edm::LogInfo("Alignment") << "[MuonDTLocalMillepedeAlgorithm] Running Local Millepede algorithm."; 
  }

}

MuonDTLocalMillepedeAlgorithm::~MuonDTLocalMillepedeAlgorithm ( ) [inline]

Destructor.

Definition at line 39 of file MuonDTLocalMillepedeAlgorithm.h.

{};

Member Function Documentation

bool MuonDTLocalMillepedeAlgorithm::build4DSegments ( ) [private]

Definition at line 214 of file MuonDTLocalMillepedeAlgorithm.cc.

Referenced by run().

                                                    {

  bool saveThis = false;
  
  //Set to 0
  int id[20][5];
  int numlayer[20][12];
  for(int s = 0; s < 20; ++s) {
    for(int k = 0; k < 5; ++k) id[s][k] = 0;
    for(int k = 0; k < 12; ++k) numlayer[s][k] = 0;
  }

  
  int nChambers = 0;
  for(int counter = 0; counter < myTrack1D.nhits; ++counter) {
    bool isNew = true;
    for(int counterCham = 0; counterCham < nChambers; counterCham++) {
      if(myTrack1D.wh[counter] == id[counterCham][0] &&
         myTrack1D.st[counter] == id[counterCham][1] &&
         myTrack1D.sr[counter] == id[counterCham][2]) {
        if(myTrack1D.sl[counter] == 2) { 
          id[counterCham][4]++;
        } else {
          id[counterCham][3]++;
        }
        for (int ila = 1; ila<=4; ila++)
          if (myTrack1D.la[counter]==ila) {
            int jla = (myTrack1D.sl[counter]-1)*4 + ila -1;
            numlayer[counterCham][jla]++;
          }
        isNew = false;
      } 
    }
    if(isNew) {
      id[nChambers][0] = myTrack1D.wh[counter];
      id[nChambers][1] = myTrack1D.st[counter];
      id[nChambers][2] = myTrack1D.sr[counter];
      if(myTrack1D.sl[counter] == 2) {
        id[nChambers][4]++;
      } else {
        id[nChambers][3]++;
      }
      for (int ila = 1; ila<=4; ila++)
        if (myTrack1D.la[counter]==ila) {
          int jla = (myTrack1D.sl[counter]-1)*4 + ila -1;
          numlayer[nChambers][jla]++;
        }
      nChambers++;
    }
  }
  
  for (int iseg = 0; iseg<MAX_SEGMENT; iseg++) 
    for (int ihit = 0; ihit<MAX_HIT_CHAM; ihit++) {
      xc[iseg][ihit] = -250.;
      yc[iseg][ihit] = -250.;
      zc[iseg][ihit] = -250.;
      ex[iseg][ihit] = -250.;
      xcp[iseg][ihit] = -250.;
      ycp[iseg][ihit] = -250.;
      excp[iseg][ihit] = -250.;
      eycp[iseg][ihit] = -250.;
      sl[iseg][ihit] = 0;
      la[iseg][ihit] = 0;
    }

  nseg = 0;
  for(int counter = 0; counter < nChambers; ++counter) {
    
    bool GoodPhiChamber = true, GoodThetaChamber = true;
    for (int ila = 1; ila<=12; ila++) {
      if (numlayer[counter][ila-1]!=1 && (ila<5 || ila>8)) GoodPhiChamber = false;
      if (numlayer[counter][ila-1]!=1 && (ila<9 || ila>4) && id[counter][1]!=4) GoodThetaChamber = false;
    }

    if(id[counter][3] >= nPhihits && (id[counter][4] >= nThetahits || id[counter][1] == 4) &&
       GoodPhiChamber && GoodThetaChamber) {

      TMatrixD phiProjection(2,2);
      TMatrixD thetaProjection(2,2);
      TMatrixD bphiProjection(2,1);
      TMatrixD bthetaProjection(2,1);
      
      TMatrixD phiProjectionSL1(2,2);
      TMatrixD bphiProjectionSL1(2,1);
      TMatrixD phiProjectionSL3(2,2);
      TMatrixD bphiProjectionSL3(2,1);
     
      float SL1_z_ave = 0;
      float SL3_z_ave = 0;

      int numh1 = 0, numh2 = 0, numh3 = 0;
      for(int counterH = 0; counterH < myTrack1D.nhits; ++counterH) {
        if(myTrack1D.wh[counterH] == id[counter][0] && myTrack1D.st[counterH] == id[counter][1] &&
           myTrack1D.sr[counterH] == id[counter][2]) {
          if(myTrack1D.sl[counterH] == 2) {
            numh2++;
            thetaProjection(0,0) += 1.0/myTrack1D.erx[counterH];
            thetaProjection(0,1) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            thetaProjection(1,0) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            thetaProjection(1,1) += myTrack1D.zc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            bthetaProjection(0,0) += myTrack1D.yc[counterH]/myTrack1D.erx[counterH];
            bthetaProjection(1,0) += myTrack1D.yc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
          } else {
            phiProjection(0,0) += 1.0/myTrack1D.erx[counterH];
            phiProjection(0,1) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            phiProjection(1,0) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            phiProjection(1,1) += myTrack1D.zc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            bphiProjection(0,0) += myTrack1D.xc[counterH]/myTrack1D.erx[counterH];
            bphiProjection(1,0) += myTrack1D.xc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
            if(myTrack1D.sl[counterH] == 1) {
              numh1++;
              phiProjectionSL1(0,0) += 1.0/myTrack1D.erx[counterH];
              phiProjectionSL1(0,1) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              phiProjectionSL1(1,0) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              phiProjectionSL1(1,1) += myTrack1D.zc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              bphiProjectionSL1(0,0) += myTrack1D.xc[counterH]/myTrack1D.erx[counterH];
              bphiProjectionSL1(1,0) += myTrack1D.xc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              SL1_z_ave += myTrack1D.zc[counterH];
            } else {
              numh3++;
              phiProjectionSL3(0,0) += 1.0/myTrack1D.erx[counterH];
              phiProjectionSL3(0,1) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              phiProjectionSL3(1,0) += myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              phiProjectionSL3(1,1) += myTrack1D.zc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              bphiProjectionSL3(0,0) += myTrack1D.xc[counterH]/myTrack1D.erx[counterH];
              bphiProjectionSL3(1,0) += myTrack1D.xc[counterH]*myTrack1D.zc[counterH]/myTrack1D.erx[counterH];
              SL3_z_ave += myTrack1D.zc[counterH];
            } 
          }
        }
      }

      SL1_z_ave /= 4.0;
      SL3_z_ave /= 4.0;
      
      if (phiProjection(0,0) != 0 && phiProjectionSL1(0,0) != 0 && phiProjectionSL3(0,0) != 0 && 
          (thetaProjection(0,0) != 0 || id[counter][1] == 4)) {
        
        wh[nseg] = id[counter][0];
        st[nseg] = id[counter][1];
        sr[nseg] = id[counter][2];
        
        if(thetaProjection(0,0) != 0 && id[counter][1] != 4) { // Already asked (almost)
          thetaProjection.Invert();
          TMatrixD solution = thetaProjection*bthetaProjection;
          ySl[nseg] = solution(0,0);
          dydzSl[nseg] = solution(1,0);
          eySl[nseg] = thetaProjection(0,0);
          edydzSl[nseg] = thetaProjection(1,1);
          eydydzSl[nseg] = thetaProjection(0,1);
        }
        phiProjection.Invert();
        phiProjectionSL1.Invert();
        phiProjectionSL3.Invert();
        TMatrixD solution = phiProjection*bphiProjection;
        TMatrixD solutionSL1 = phiProjectionSL1*bphiProjectionSL1;
        TMatrixD solutionSL3 = phiProjectionSL3*bphiProjectionSL3;
        xSl[nseg] = solution(0,0);
        dxdzSl[nseg] = solution(1,0);
        exSl[nseg] = phiProjection(0,0);
        edxdzSl[nseg] = phiProjection(1,1);
        exdxdzSl[nseg] = phiProjection(0,0);
        xSlSL1[nseg] = solutionSL1(0,0);
        dxdzSlSL1[nseg] = solutionSL1(1,0);
        exSlSL1[nseg] = phiProjectionSL1(0,0);
        edxdzSlSL1[nseg] = phiProjectionSL1(1,1);
        exdxdzSlSL1[nseg] = phiProjectionSL1(0,0);
        xSL1SL3[nseg] = solutionSL1(0,0) + SL3_z_ave * solutionSL1(1,0);
        xSlSL3[nseg] = solutionSL3(0,0);
        dxdzSlSL3[nseg] = solutionSL3(1,0);
        exSlSL3[nseg] = phiProjectionSL3(0,0);
        edxdzSlSL3[nseg] = phiProjectionSL3(1,1);
        exdxdzSlSL3[nseg] = phiProjectionSL3(0,0);
        xSL3SL1[nseg] = solutionSL3(0,0) + SL1_z_ave * solutionSL3(1,0);
        int hitcounter = 0;
        for(int counterH = 0; counterH < myTrack1D.nhits; ++counterH) {
          if(myTrack1D.wh[counterH] == wh[nseg] && myTrack1D.st[counterH] == st[nseg] &&
             myTrack1D.sr[counterH] == sr[nseg]) {
            xc[nseg][hitcounter] = myTrack1D.xc[counterH];
            yc[nseg][hitcounter] = myTrack1D.yc[counterH];
            zc[nseg][hitcounter] = myTrack1D.zc[counterH];
            ex[nseg][hitcounter] = myTrack1D.erx[counterH];
            xcp[nseg][hitcounter] = xSl[nseg]+dxdzSl[nseg]*myTrack1D.zc[counterH];
            ycp[nseg][hitcounter] = ySl[nseg]+dydzSl[nseg]*myTrack1D.zc[counterH];
            excp[nseg][hitcounter] = exSl[nseg]*exSl[nseg]+ (edxdzSl[nseg]*edxdzSl[nseg])*myTrack1D.zc[counterH];
            eycp[nseg][hitcounter] = eySl[nseg]*eySl[nseg]+ (edydzSl[nseg]*edydzSl[nseg])*myTrack1D.zc[counterH];
            sl[nseg][hitcounter] = myTrack1D.sl[counterH];
            la[nseg][hitcounter] = myTrack1D.la[counterH];
            saveThis = true;
            hitcounter++;
          }
        }
        nphihits[nseg] = id[counter][3];
        nthetahits[nseg] = id[counter][4];
        nhits[nseg] = hitcounter;
        nseg++;
      }
    }
  }
  return saveThis;
}

void MuonDTLocalMillepedeAlgorithm::initialize	(	const edm::EventSetup &	setup,
		AlignableTracker *	tracker,
		AlignableMuon *	muon,
		AlignmentParameterStore *	store
	)

Call at beginning of job.

Definition at line 86 of file MuonDTLocalMillepedeAlgorithm.cc.

References AlignmentParameterStore::alignables(), theAlignableDetAccessor, theAlignables, and theAlignmentParameterStore.

{
  
  // accessor Det->AlignableDet
  if ( !muon )
    theAlignableDetAccessor = new AlignableNavigator(tracker);
  else if ( !tracker )
    theAlignableDetAccessor = new AlignableNavigator(muon);
  else 
    theAlignableDetAccessor = new AlignableNavigator(tracker,muon);
  
  // set alignmentParameterStore
  theAlignmentParameterStore=store;
  
  // get alignables
  theAlignables = theAlignmentParameterStore->alignables();
  
}

void MuonDTLocalMillepedeAlgorithm::run	(	const edm::EventSetup &	setup,
		const EventInfo &	eventInfo
	)		`[virtual]`

Run the algorithm on trajectories and tracks.

Implements AlignmentAlgorithmBase.

Definition at line 132 of file MuonDTLocalMillepedeAlgorithm.cc.

{

  //Only important in the production mode
  if(workingmode != 0) return;
 
  const ConstTrajTrackPairCollection &tracks = eventInfo.trajTrackPairs_;
  for( ConstTrajTrackPairCollection::const_iterator it=tracks.begin();
       it!=tracks.end();it++) {

    const Trajectory *traj = (*it).first;
    const reco::Track *track = (*it).second;
    
    p    = track->p();
    pt    = track->pt();
    eta   = track->eta();
    phi   = track->phi();
    charge = track->charge();
 

    if(pt < ptMin || pt > ptMax) continue;
    
    vector<const TransientTrackingRecHit*> hitvec;
    vector<TrajectoryMeasurement> measurements = traj->measurements();

    //In this loop the measurements and hits are extracted and put into two vectors 
    int ch_muons = 0;
    for (vector<TrajectoryMeasurement>::iterator im=measurements.begin();
         im!=measurements.end(); im++) {
      TrajectoryMeasurement meas = *im;
      const TransientTrackingRecHit* hit = &(*meas.recHit());
      //We are not very strict at this point
      if (hit->isValid()) {
        if(hit->det()->geographicalId().det() == 2 && hit->det()->geographicalId().subdetId() == 1) {
          hitvec.push_back(hit);
          ch_muons++;
        } 
      }
    }


    vector<const TransientTrackingRecHit*>::const_iterator ihit=hitvec.begin();
    //Information is stored temporally in the myTrack1D object, which is analyzed
    //in the build4DSegments method in order to associate hits to segments. 
    int ch_counter = 0;
    while (ihit != hitvec.end()) 
      {
        const GeomDet* det=(*ihit)->det();
        if(det->geographicalId().det() == 2) {
          if(det->geographicalId().subdetId() == 1) {
            DTLayerId mLayer(det->geographicalId().rawId());
            DTChamberId mChamber(mLayer.wheel(), mLayer.station(), mLayer.sector());
            AlignableDet *aliDet = theAlignableDetAccessor->alignableDetFromDetId(mChamber);
            myTrack1D.wh[ch_counter] = mLayer.wheel();
            myTrack1D.st[ch_counter] = mLayer.station();
            myTrack1D.sr[ch_counter] = mLayer.sector();
            myTrack1D.sl[ch_counter] = mLayer.superlayer();
            myTrack1D.la[ch_counter] = mLayer.layer();
            myTrack1D.erx[ch_counter] = (*ihit)->localPositionError().xx();
            GlobalPoint globhit = det->toGlobal((*ihit)->localPosition());
            LocalPoint seghit = aliDet->surface().toLocal(globhit);
            myTrack1D.xc[ch_counter] = seghit.x();
            myTrack1D.yc[ch_counter] = seghit.y();
            myTrack1D.zc[ch_counter] = seghit.z();
            ch_counter++;
          }
        }
        ihit++;
      }
    myTrack1D.nhits = ch_counter;
    if(build4DSegments()) ttreeOutput->Fill();
  }
  
}

void MuonDTLocalMillepedeAlgorithm::setBranchTrees ( ) [private]

Definition at line 419 of file MuonDTLocalMillepedeAlgorithm.cc.

References charge, dxdzSl, dxdzSlSL1, dxdzSlSL3, dydzSl, edxdzSl, edxdzSlSL1, edxdzSlSL3, edydzSl, eta, ex, excp, exSl, exSlSL1, exSlSL3, eycp, eydydzSl, eySl, la, nhits, nphihits, nseg, nthetahits, p, phi, pt, sl, sr, st, ttreeOutput, wh, xc, xcp, xSl, xSL1SL3, xSL3SL1, xSlSL1, xSlSL3, yc, ycp, ySl, and zc.

Referenced by MuonDTLocalMillepedeAlgorithm().

                                                   {

  ttreeOutput = new TTree("InfoTuple", "InfoTuple");
  
  ttreeOutput->Branch("p", &p, "p/F");
  ttreeOutput->Branch("pt", &pt, "pt/F");
  ttreeOutput->Branch("eta", &eta, "eta/F");
  ttreeOutput->Branch("phi", &phi, "phi/F");
  ttreeOutput->Branch("charge", &charge, "charge/F");
  ttreeOutput->Branch("nseg", &nseg, "nseg/I");
  ttreeOutput->Branch("nphihits", nphihits, "nphihits[nseg]/I");
  ttreeOutput->Branch("nthetahits", nthetahits, "nthetahits[nseg]/I");
  ttreeOutput->Branch("nhits", nhits, "nhits[nseg]/I");
  ttreeOutput->Branch("xSl", xSl, "xSl[nseg]/F");
  ttreeOutput->Branch("dxdzSl", dxdzSl, "dxdzSl[nseg]/F");
  ttreeOutput->Branch("exSl", exSl, "exSl[nseg]/F");
  ttreeOutput->Branch("edxdzSl", edxdzSl, "edxdzSl[nseg]/F");
  ttreeOutput->Branch("exdxdzSl", edxdzSl, "exdxdzSl[nseg]/F");
  ttreeOutput->Branch("ySl", ySl, "ySl[nseg]/F");
  ttreeOutput->Branch("dydzSl", dydzSl, "dydzSl[nseg]/F");
  ttreeOutput->Branch("eySl", eySl, "eySl[nseg]/F");
  ttreeOutput->Branch("edydzSl", edydzSl, "edydzSl[nseg]/F");
  ttreeOutput->Branch("eydydzSl", eydydzSl, "eydydzSl[nseg]/F");
  ttreeOutput->Branch("xSlSL1", xSlSL1, "xSlSL1[nseg]/F");
  ttreeOutput->Branch("dxdzSlSL1", dxdzSlSL1, "dxdzSlSL1[nseg]/F");
  ttreeOutput->Branch("exSlSL1", exSlSL1, "exSlSL1[nseg]/F");
  ttreeOutput->Branch("edxdzSlSL1", edxdzSlSL1, "edxdzSlSL1[nseg]/F");
  ttreeOutput->Branch("xSL1SL3", xSL1SL3, "xSL1SL3[nseg]/F");
  ttreeOutput->Branch("xSlSL3", xSlSL3, "xSlSL3[nseg]/F");
  ttreeOutput->Branch("dxdzSlSL3", dxdzSlSL3, "dxdzSlSL3[nseg]/F");
  ttreeOutput->Branch("exSlSL3", exSlSL3, "exSlSL3[nseg]/F");
  ttreeOutput->Branch("edxdzSlSL3", edxdzSlSL3, "edxdzSlSL3[nseg]/F");
  ttreeOutput->Branch("xSL3SL1", xSL3SL1, "xSL3SL1[nseg]/F");
  ttreeOutput->Branch("xc", xc, "xc[nseg][14]/F");
  ttreeOutput->Branch("yc", yc, "yc[nseg][14]/F");
  ttreeOutput->Branch("zc", zc, "zc[nseg][14]/F");
  ttreeOutput->Branch("ex", ex, "ex[nseg][14]/F");
  ttreeOutput->Branch("xcp", xcp, "xcp[nseg][14]/F");
  ttreeOutput->Branch("ycp", ycp, "ycp[nseg][14]/F");
  ttreeOutput->Branch("excp", excp, "excp[nseg][14]/F");
  ttreeOutput->Branch("eycp", eycp, "eycp[nseg][14]/F");
  ttreeOutput->Branch("wh", wh, "wh[nseg]/I");
  ttreeOutput->Branch("st", st, "st[nseg]/I");
  ttreeOutput->Branch("sr", sr, "sr[nseg]/I");
  ttreeOutput->Branch("sl", sl, "sl[nseg][14]/I");
  ttreeOutput->Branch("la", la, "la[nseg][14]/I");

}

void MuonDTLocalMillepedeAlgorithm::terminate ( void ) [virtual]

Call at end of job.

Implements AlignmentAlgorithmBase.

Definition at line 110 of file MuonDTLocalMillepedeAlgorithm.cc.

References f, nMtxSection, nPhihits, nThetahits, ntuplePath, numberOfRootFiles, ptMax, ptMin, and workingmode.

{

  //If workingmode equals 1 or 2, the algorithms are run before saving.   
  if(workingmode == 1) {
    edm::LogInfo("Alignment") << "[MuonDTLocalMillepedeAlgorithm] Starting SLToSL algorithm";
    DTMuonSLToSL mySLToSL(ntuplePath, numberOfRootFiles, ptMax, ptMin, f);
  } else if(workingmode >= 2) {
    edm::LogInfo("Alignment") << "[MuonDTLocalMillepedeAlgorithm] Starting local MuonMillepede algorithm";
    DTMuonMillepede myMillepede(ntuplePath, numberOfRootFiles, ptMax, ptMin, nPhihits, nThetahits, workingmode, nMtxSection);
  } 

  if (workingmode==0) {
    f->Write();
    f->Close();
  }

}