00169 {
00170
00171 LogDebug("TIBGeom") << "==>> Constructing DDTIBLayerAlgo_MTCC...";
00172
00173
00174 double rotsi = std::abs(detectorTilt);
00175 double redgd1 = 0.5*(detectorW*sin(rotsi)+detectorT*cos(rotsi));
00176 double redgd2 = 0.5*(detectorW*cos(rotsi)-detectorT*sin(rotsi));
00177 double redgc1 = 0.5*(coolTubeW*sin(rotsi)+coolTubeT*cos(rotsi));
00178 double redgc2 = 0.5*(coolTubeW*cos(rotsi)-coolTubeT*sin(rotsi));
00179 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test DeltaR (Detector Tilt) "
00180 << redgd1 << ", " << redgd2 << " DeltaR (Cable+Cool) "
00181 << redgc1 << ", " << redgc2;
00182
00183 DDName parentName = parent().name();
00184 std::string idName = DDSplit(parentName).first;
00185 double rmin = radiusLo + roffDetLo - redgd1 - detectorTol;
00186 double rmax = sqrt((radiusUp+roffDetUp+redgd1)*(radiusUp+roffDetUp+redgd1)+
00187 redgd2*redgd2) + detectorTol;
00188 DDSolid solid = DDSolidFactory::tubs(DDName(idName, idNameSpace), 0.5*layerL,
00189 rmin, rmax, 0, twopi);
00190 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00191 << DDName(idName,idNameSpace) << " Tubs made of "
00192 << genMat << " from 0 to " << twopi/deg << " with Rin "
00193 << rmin << " Rout " << rmax << " ZHalf " << 0.5*layerL;
00194 DDName matname(DDSplit(genMat).first, DDSplit(genMat).second);
00195 DDMaterial matter(matname);
00196 DDLogicalPart layer(solid.ddname(), matter, solid);
00197
00198
00199 double rin = rmin;
00200 double rout = 0.5*(radiusLo+radiusUp-cylinderT);
00201 std::string name = idName + "Down";
00202 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), 0.5*layerL,
00203 rin, rout, 0, twopi);
00204 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00205 << DDName(name, idNameSpace) << " Tubs made of "
00206 << genMat << " from 0 to " << twopi/deg << " with Rin "
00207 << rin << " Rout " << rout << " ZHalf " << 0.5*layerL;
00208 DDLogicalPart layerIn(solid.ddname(), matter, solid);
00209 DDpos (layerIn, layer, 1, DDTranslation(0.0, 0.0, 0.0), DDRotation());
00210 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: " << layerIn.name()
00211 << " number 1 positioned in " << layer.name()
00212 << " at (0,0,0) with no rotation";
00213
00214 double rposdet = radiusLo + roffDetLo;
00215 double rposcab = rposdet + roffCableLo;
00216 double dphi = twopi/stringsLo;
00217 DDName detIn(DDSplit(detectorLo).first, DDSplit(detectorLo).second);
00218 DDName cabIn(DDSplit(coolCableLo).first, DDSplit(coolCableLo).second);
00219 for (int n = 0; n < stringsLo; n++) {
00220 double phi = phioffLo + n*dphi;
00221 if( phi>=phiMinLo && phi<phiMaxLo ) {
00222 double phix = phi - detectorTilt + 90*deg;
00223 double phideg = phix/deg;
00224 DDRotation rotation;
00225 if (phideg != 0) {
00226 double theta = 90*deg;
00227 double phiy = phix + 90.*deg;
00228 std::string rotstr = idName + dbl_to_string(phideg*10.);
00229 rotation = DDRotation(DDName(rotstr, idNameSpace));
00230 if (!rotation) {
00231 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test: Creating a new "
00232 << "rotation: " << rotstr << "\t90., "
00233 << phix/deg << ", 90.," << phiy/deg << ", 0, 0";
00234 rotation = DDrot(DDName(rotstr, idNameSpace), theta,phix, theta,phiy,
00235 0., 0.);
00236 }
00237 }
00238
00239
00240 bool empty=true;
00241 for(unsigned int i=0; i<stringLoList.size(); i++) {
00242 if(n+1==(int)stringLoList[i]) {
00243 empty=false;
00244 }
00245 }
00246 if(empty) {
00247 if(emptyDetectorLo!="nothing") {
00248 DDName emptyDetIn(DDSplit(emptyDetectorLo).first, DDSplit(emptyDetectorLo).second);
00249 DDTranslation trdet(rposdet*cos(phi), rposdet*sin(phi), 0);
00250 DDpos (emptyDetIn, layerIn, n+1, trdet, rotation);
00251 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << emptyDetIn.name()
00252 << " number " << n+1 << " positioned in "
00253 << layerIn.name() << " at " << trdet
00254 << " with " << rotation;
00255 }
00256 if(emptyCoolCableLo!="nothing") {
00257 DDName emptyCabIn(DDSplit(emptyCoolCableLo).first, DDSplit(emptyCoolCableLo).second);
00258 DDTranslation trcab(rposcab*cos(phi), rposcab*sin(phi), 0);
00259 DDpos (emptyCabIn, layerIn, n+1, trcab, rotation);
00260 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << emptyCabIn.name()
00261 << " number " << n+1 << " positioned in "
00262 << layerIn.name() << " at " << trcab
00263 << " with " << rotation;
00264 }
00265 } else {
00266 DDTranslation trdet(rposdet*cos(phi), rposdet*sin(phi), 0);
00267 DDpos (detIn, layerIn, n+1, trdet, rotation);
00268 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << detIn.name()
00269 << " number " << n+1 << " positioned in "
00270 << layerIn.name() << " at " << trdet
00271 << " with " << rotation;
00272 DDTranslation trcab(rposcab*cos(phi), rposcab*sin(phi), 0);
00273 DDpos (cabIn, layerIn, n+1, trcab, rotation);
00274 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << cabIn.name()
00275 << " number " << n+1 << " positioned in "
00276 << layerIn.name() << " at " << trcab
00277 << " with " << rotation;
00278 }
00279
00280
00281 }
00282
00283 }
00284
00285
00286 rin = 0.5*(radiusLo+radiusUp+cylinderT);
00287 rout = rmax;
00288 name = idName + "Up";
00289 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), 0.5*layerL,
00290 rin, rout, 0, twopi);
00291 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00292 << DDName(name, idNameSpace) << " Tubs made of "
00293 << genMat << " from 0 to " << twopi/deg << " with Rin "
00294 << rin << " Rout " << rout << " ZHalf " << 0.5*layerL;
00295 DDLogicalPart layerOut(solid.ddname(), matter, solid);
00296 DDpos (layerOut, layer, 1, DDTranslation(0.0, 0.0, 0.0), DDRotation());
00297 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: " << layerOut.name()
00298 << " number 1 positioned in " << layer.name()
00299 << " at (0,0,0) with no rotation";
00300
00301 rposdet = radiusUp + roffDetUp;
00302 rposcab = rposdet + roffCableUp;
00303 dphi = twopi/stringsUp;
00304 DDName detOut(DDSplit(detectorUp).first, DDSplit(detectorUp).second);
00305 DDName cabOut(DDSplit(coolCableUp).first, DDSplit(coolCableUp).second);
00306 for (int n = 0; n < stringsUp; n++) {
00307 double phi = phioffUp + n*dphi;
00308 if( phi>=phiMinUp && phi<phiMaxUp ) {
00309 double phix = phi - detectorTilt - 90*deg;
00310 double phideg = phix/deg;
00311 DDRotation rotation;
00312 if (phideg != 0) {
00313 double theta = 90*deg;
00314 double phiy = phix + 90.*deg;
00315 std::string rotstr = idName + dbl_to_string(phideg*10.);
00316 rotation = DDRotation(DDName(rotstr, idNameSpace));
00317 if (!rotation) {
00318 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test: Creating a new "
00319 << "rotation: " << rotstr << "\t90., "
00320 << phix/deg << ", 90.," << phiy/deg << ", 0, 0";
00321 rotation = DDrot(DDName(rotstr, idNameSpace), theta,phix, theta,phiy,
00322 0., 0.);
00323 }
00324 }
00325
00326
00327 bool empty=true;
00328 for(unsigned int i=0; i<stringUpList.size(); i++) {
00329 if(n+1==(int)stringUpList[i]) {
00330 empty=false;
00331 }
00332 }
00333 if(empty) {
00334 if(emptyDetectorUp!="nothing") {
00335 DDName emptyDetOut(DDSplit(emptyDetectorUp).first, DDSplit(emptyDetectorUp).second);
00336 DDTranslation trdet(rposdet*cos(phi), rposdet*sin(phi), 0);
00337 DDpos (emptyDetOut, layerOut, n+1, trdet, rotation);
00338 LogDebug("TIBGeom") << "DDTIBLayer test " << emptyDetOut.name()
00339 << " number " << n+1 << " positioned in "
00340 << layerOut.name() << " at " << trdet
00341 << " with " << rotation;
00342
00343 }
00344 if(emptyCoolCableUp!="nothing") {
00345 DDName emptyCabOut(DDSplit(emptyCoolCableUp).first, DDSplit(emptyCoolCableUp).second);
00346 DDTranslation trcab(rposcab*cos(phi), rposcab*sin(phi), 0);
00347 DDpos (emptyCabOut, layerOut, n+1, trcab, rotation);
00348 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << emptyCabOut.name()
00349 << " number " << n+1 << " positioned in "
00350 << layerOut.name() << " at " << trcab
00351 << " with " << rotation;
00352 }
00353 } else {
00354 DDTranslation trdet(rposdet*cos(phi), rposdet*sin(phi), 0);
00355 DDpos (detOut, layerOut, n+1, trdet, rotation);
00356 LogDebug("TIBGeom") << "DDTIBLayer test " << detOut.name()
00357 << " number " << n+1 << " positioned in "
00358 << layerOut.name() << " at " << trdet
00359 << " with " << rotation;
00360 DDTranslation trcab(rposcab*cos(phi), rposcab*sin(phi), 0);
00361 DDpos (cabOut, layerOut, n+1, trcab, rotation);
00362 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << cabOut.name()
00363 << " number " << n+1 << " positioned in "
00364 << layerOut.name() << " at " << trcab
00365 << " with " << rotation;
00366 }
00367
00368
00369 }
00370
00371 }
00372
00373 double phiMin = phiMinUp-phioffUp;
00374 double phiMax = phiMaxUp-phioffUp;
00375 double phidiff = fabs(phiMax-phiMin);
00376
00377 rin = 0.5*(radiusLo+radiusUp-cylinderT);
00378 rout = 0.5*(radiusLo+radiusUp+cylinderT);
00379 name = idName + "Cylinder";
00380 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), 0.25*layerL,
00381 rin, rout, phiMin, phidiff);
00382 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00383 << DDName(name, idNameSpace) << " Tubs made of "
00384 << cylinderMat << " from " << phiMin/deg << " to "
00385 << (phiMin+phidiff)/deg << " with Rin " << rin
00386 << " Rout " << rout << " ZHalf " << 0.25*layerL;
00387 matname = DDName(DDSplit(cylinderMat).first, DDSplit(cylinderMat).second);
00388 DDMaterial matcyl(matname);
00389 DDLogicalPart cylinder(solid.ddname(), matcyl, solid);
00390 DDpos (cylinder, layer, 1, DDTranslation(0.0,0.0,0.25*layerL), DDRotation());
00391 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: " << cylinder.name()
00392 << " number 1 positioned in " << layer.name()
00393 << " at (0,0," << 0.25*layerL << ") with no rotation";
00394 rin += supportT;
00395 rout -= supportT;
00396 name = idName + "CylinderIn";
00397 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), 0.5*layerL,
00398 rin, rout, phiMin, phidiff);
00399 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00400 << DDName(name, idNameSpace) << " Tubs made of "
00401 << genMat << " from " << phiMin/deg << " to "
00402 << (phiMin+phidiff)/deg << phidiff/deg << " with Rin "
00403 << rin << " Rout " << rout << " ZHalf " << 0.5*layerL;
00404 DDLogicalPart cylinderIn(solid.ddname(), matter, solid);
00405 DDpos (cylinderIn, cylinder, 1, DDTranslation(0.0, 0.0, -0.25*layerL), DDRotation());
00406 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: " << cylinderIn.name()
00407 << " number 1 positioned in " << cylinder.name()
00408 << " at (0,0," << -0.25*layerL << ") with no rotation";
00409 name = idName + "CylinderInSup";
00410 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), 0.5*supportW,
00411 rin, rout, phiMin, phidiff);
00412 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00413 << DDName(name, idNameSpace) << " Tubs made of "
00414 << genMat << " from " << phiMin/deg << " to "
00415 << (phiMin+phidiff)/deg << " with Rin " << rin
00416 << " Rout " << rout << " ZHalf " << 0.5*supportW;
00417 matname = DDName(DDSplit(supportMat).first, DDSplit(supportMat).second);
00418 DDMaterial matsup(matname);
00419 DDLogicalPart cylinderSup(solid.ddname(), matsup, solid);
00420 DDpos (cylinderSup, cylinderIn, 1, DDTranslation(0., 0., 0.), DDRotation());
00421 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: " << cylinderSup.name()
00422 << " number 1 positioned in " << cylinderIn.name()
00423 << " at (0,0,0) with no rotation";
00424 matname = DDName(DDSplit(ribMat).first, DDSplit(ribMat).second);
00425 DDMaterial matrib(matname);
00426 for (unsigned int i = 0; i < ribW.size(); i++) {
00427 name = idName + "Rib" + dbl_to_string(i);
00428 double width = 2.*ribW[i]/(rin+rout);
00429 double dz = 0.25*(layerL - supportW);
00430 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), dz, rin, rout,
00431 -0.5*width, width);
00432 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00433 << DDName(name, idNameSpace) << " Tubs made of "
00434 << ribMat << " from " << -0.5*width/deg
00435 << " to " << 0.5*width/deg << " with Rin " << rin
00436 << " Rout " << rout << " ZHalf " << dz;
00437 DDLogicalPart cylinderRib(solid.ddname(), matrib, solid);
00438 double phix = ribPhi[i];
00439 double phideg = phix/deg;
00440 if( phideg>=phiMin/deg && phideg<phiMax/deg ) {
00441 DDRotation rotation;
00442 if (phideg != 0) {
00443 double theta = 90*deg;
00444 double phiy = phix + 90.*deg;
00445 std::string rotstr = idName + dbl_to_string(phideg*10.);
00446 rotation = DDRotation(DDName(rotstr, idNameSpace));
00447 if (!rotation) {
00448 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test: Creating a new "
00449 << "rotation: " << rotstr << "\t90., "
00450 << phix/deg << ", 90.," << phiy/deg << ", 0, 0";
00451 rotation = DDrot(DDName(rotstr, idNameSpace), theta,phix, theta,phiy,
00452 0., 0.);
00453 }
00454 }
00455 DDTranslation tran(0, 0, +0.25*(layerL+supportW));
00456 DDpos (cylinderRib, cylinderIn, 1, tran, rotation);
00457 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << cylinderRib.name()
00458 << " number 1 positioned in " << cylinderIn.name()
00459 << " at " << tran << " with " << rotation;
00460 }
00461 }
00462
00463
00464
00465 double dz_dohm = 0.5*dohmCarrierW;
00466 double dphi_dohm = twopi/((double)dohmN);
00467 double rout_dohm = 0.5*(radiusLo+radiusUp+cylinderT)+dohmCarrierR;
00468
00469
00470
00471 name = idName + "DOHMCarrier_lo";
00472 double rin_lo = rout_dohm;
00473 double rout_lo = rin_lo + dohmCarrierT;
00474 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), dz_dohm,
00475 rin_lo, rout_lo,
00476 -0.5*dphi_dohm, dphi_dohm);
00477 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00478 << DDName(name, idNameSpace) << " Tubs made of "
00479 << dohmCarrierMaterial << " from "
00480 << -0.5*(dphi_dohm)/deg << " to "
00481 << -0.5*(dphi_dohm)/deg+dphi_dohm/deg << " with Rin "
00482 << rin_lo << " Rout " << rout_lo << " ZHalf "
00483 << dz_dohm;
00484
00485 std::string name_lo_r = name + "_PRIM_AUX" + "_lo" + "_r";
00486 std::string name_lo_l = name + "_PRIM_AUX" + "_lo" + "_l";
00487 DDLogicalPart dohmCarrierPrimAux_lo_r(name_lo_r, DDMaterial(dohmCarrierMaterial), solid);
00488 DDLogicalPart dohmCarrierPrimAux_lo_l(name_lo_l, DDMaterial(dohmCarrierMaterial), solid);
00489 name_lo_r = name + "_PRIM" + "_lo" + "_r";
00490 name_lo_l = name + "_PRIM" + "_lo" + "_l";
00491 DDLogicalPart dohmCarrierPrim_lo_r(name_lo_r, DDMaterial(dohmCarrierMaterial), solid);
00492 DDLogicalPart dohmCarrierPrim_lo_l(name_lo_l, DDMaterial(dohmCarrierMaterial), solid);
00493
00494 name = idName + "DOHMCarrier_up";
00495 double rin_up = rout_lo + 2.*dohmAuxT;
00496 double rout_up = rin_up + dohmCarrierT;
00497 solid = DDSolidFactory::tubs(DDName(name, idNameSpace), dz_dohm,
00498 rin_up, rout_up,
00499 -0.5*dphi_dohm, dphi_dohm);
00500 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00501 << DDName(name, idNameSpace) << " Tubs made of "
00502 << dohmCarrierMaterial << " from "
00503 << -0.5*(dphi_dohm)/deg << " to "
00504 << -0.5*(dphi_dohm)/deg+dphi_dohm/deg << " with Rin "
00505 << rin_up << " Rout " << rout_up << " ZHalf "
00506 << dz_dohm;
00507
00508 std::string name_up_r = name + "_PRIM_AUX" + "_up" + "_r";
00509 std::string name_up_l = name + "_PRIM_AUX" + "_up" + "_l";
00510 DDLogicalPart dohmCarrierPrimAux_up_r(name_up_r, DDMaterial(dohmCarrierMaterial), solid);
00511 DDLogicalPart dohmCarrierPrimAux_up_l(name_up_l, DDMaterial(dohmCarrierMaterial), solid);
00512 name_up_r = name + "_PRIM" + "_up" + "_r";
00513 name_up_l = name + "_PRIM" + "_up" + "_l";
00514 DDLogicalPart dohmCarrierPrim_up_r(name_up_r, DDMaterial(dohmCarrierMaterial), solid);
00515 DDLogicalPart dohmCarrierPrim_up_l(name_up_l, DDMaterial(dohmCarrierMaterial), solid);
00516
00517 for (unsigned int i = 0; i < (unsigned int)dohmN; i++) {
00518 DDLogicalPart dohmCarrier_lo_r;
00519 DDLogicalPart dohmCarrier_lo_l;
00520 DDLogicalPart dohmCarrier_up_r;
00521 DDLogicalPart dohmCarrier_up_l;
00522
00523 bool prim = false;
00524 bool aux = false;
00525 if((unsigned int)dohmList[i]==2) {
00526 prim = true;
00527 aux = true;
00528 } else if((unsigned int)dohmList[i]==1) {
00529 prim = true;
00530 aux = false;
00531 } else {
00532 prim = false;
00533 aux = false;
00534 }
00535
00536 if(prim) {
00537 dohmCarrier_lo_r = dohmCarrierPrim_lo_r;
00538 dohmCarrier_lo_l = dohmCarrierPrim_lo_l;
00539 dohmCarrier_up_r = dohmCarrierPrim_up_r;
00540 dohmCarrier_up_l = dohmCarrierPrim_up_l;
00541 }
00542 if(prim && aux) {
00543 dohmCarrier_lo_r = dohmCarrierPrimAux_lo_r;
00544 dohmCarrier_lo_l = dohmCarrierPrimAux_lo_l;
00545 dohmCarrier_up_r = dohmCarrierPrimAux_up_r;
00546 dohmCarrier_up_l = dohmCarrierPrimAux_up_l;
00547 }
00548
00549
00550 if(prim) {
00551 double phix = ((double)i+0.5)*dphi_dohm;
00552 double phideg = phix/deg;
00553
00554 DDRotation rotation;
00555 if (phideg != 0) {
00556 double theta = 90*deg;
00557 double phiy = phix + 90.*deg;
00558 std::string rotstr = idName + dbl_to_string(phideg*10.);
00559 rotation = DDRotation(DDName(rotstr, idNameSpace));
00560 if (!rotation) {
00561 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test: Creating a new "
00562 << "rotation: " << rotstr << "\t90., "
00563 << phix/deg << ", 90.," << phiy/deg << ", 0, 0";
00564 rotation = DDrot(DDName(rotstr, idNameSpace), theta,phix, theta,phiy,
00565 0., 0.);
00566 }
00567 }
00568
00569 DDTranslation tran(0, 0, 0.5*layerL-dz_dohm);
00570 DDpos (dohmCarrier_lo_r, parent(), i+1, tran, rotation );
00571 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCarrier_lo_r.name()
00572 << " z+ number " << i+1 << " positioned in "
00573 << parent().name() << " at " << tran
00574 << " with " << rotation;
00575
00576 DDpos (dohmCarrier_up_r, parent(), i+1+(unsigned int)dohmN, tran, rotation );
00577 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCarrier_up_r.name()
00578 << " z+ number " << i+1 << " positioned in "
00579 << parent().name() << " at " << tran
00580 << " with " << rotation;
00581 }
00582
00583
00584 }
00585
00586
00587
00588 double dx = 0.5*dohmPrimT;
00589 double dy = 0.5*dohmPrimW;
00590 double dz = 0.5*dohmPrimL;
00591 name = idName + "DOHM_PRIM";
00592 solid = DDSolidFactory::box(DDName(name, idNameSpace), dx, dy, dz);
00593 DDLogicalPart dohmPrim(solid.ddname(), DDMaterial(dohmPrimMaterial), solid);
00594 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00595 << DDName(name, idNameSpace) << " Box made of "
00596 << dohmPrimMaterial << " of dimensions " << dx << ", "
00597 << dy << ", " << dz;
00598 name = idName + "DOHM_PRIM_Cable";
00599 double dx_cable = 0.25*dohmPrimT;
00600 double dy_cable = 0.40*dohmPrimW;
00601 double dz_cable = 0.5*dohmPrimL;
00602 solid = DDSolidFactory::box(DDName(name, idNameSpace), dx_cable, dy_cable, dz_cable);
00603 DDLogicalPart dohmCablePrim(solid.ddname(), DDMaterial(dohmCableMaterial), solid);
00604 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00605 << DDName(name, idNameSpace) << " Box made of "
00606 << dohmCableMaterial << " of dimensions " << dx_cable
00607 << ", " << dy_cable << ", " << dz_cable;
00608
00609 DDTranslation tran(rout_dohm+0.5*dohmPrimT, 0. , 0.);
00610 DDpos (dohmPrim, dohmCarrierPrim_lo_r, 1, tran, DDRotation() );
00611 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmPrim.name()
00612 << " z+ number " << 1 << " positioned in "
00613 << dohmCarrierPrim_lo_r.name() << " at " << tran
00614 << " with no rotation";
00615 tran = DDTranslation(rout_dohm+dx_cable, 0.5*dohmPrimW , 0.);
00616 DDpos (dohmCablePrim, dohmCarrierPrim_lo_r, 1, tran, DDRotation() );
00617 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCablePrim.name()
00618 << " copy number " << 1 << " positioned in "
00619 << dohmCarrierPrim_lo_r.name()
00620 << " at " << tran << " with no rotation";
00621 tran = DDTranslation(rout_dohm+dx_cable, -0.5*dohmPrimW , 0.);
00622 DDpos (dohmCablePrim, dohmCarrierPrim_lo_r, 2, tran, DDRotation() );
00623 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCablePrim.name()
00624 << " copy number " << 2 << " positioned in "
00625 << dohmCarrierPrim_lo_r.name()
00626 << " at " << tran << " with no rotation";
00627
00628
00629 dx = 0.5*dohmPrimT;
00630 dy = 0.5*dohmPrimW;
00631 dz = 0.5*dohmPrimL;
00632 name = idName + "DOHM_PRIM";
00633 solid = DDSolidFactory::box(DDName(name, idNameSpace), dx, dy, dz);
00634 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00635 << DDName(name, idNameSpace) << " Box made of "
00636 << dohmPrimMaterial << " of dimensions " << dx << ", "
00637 << dy << ", " << dz;
00638 dohmPrim = DDLogicalPart(solid.ddname(), DDMaterial(dohmPrimMaterial), solid);
00639 name = idName + "DOHM_PRIM_Cable";
00640 dx_cable = 0.25*dohmPrimT;
00641 dy_cable = 0.40*dohmPrimW;
00642 dz_cable = 0.5*dohmPrimL;
00643 solid = DDSolidFactory::box(DDName(name, idNameSpace), dx_cable, dy_cable, dz_cable);
00644 dohmCablePrim = DDLogicalPart(solid.ddname(), DDMaterial(dohmCableMaterial), solid);
00645 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00646 << DDName(name, idNameSpace) << " Box made of "
00647 << dohmCableMaterial << " of dimensions " << dx_cable
00648 << ", " << dy_cable << ", " << dz_cable;
00649 dx = 0.5*dohmAuxT;
00650 dy = 0.5*dohmAuxW;
00651 dz = 0.5*dohmAuxL;
00652 name = idName + "DOHM_AUX";
00653 solid = DDSolidFactory::box(DDName(name, idNameSpace), dx, dy, dz);
00654 DDLogicalPart dohmAux(solid.ddname(), DDMaterial(dohmAuxMaterial), solid);
00655 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00656 << DDName(name, idNameSpace) << " Box made of "
00657 << dohmAuxMaterial << " of dimensions " << dx << ", "
00658 << dy << ", " << dz;
00659 name = idName + "DOHM_AUX_Cable";
00660 solid = DDSolidFactory::box(DDName(name, idNameSpace), dx_cable, dy_cable, dz_cable);
00661 DDLogicalPart dohmCableAux(solid.ddname(), DDMaterial(dohmCableMaterial), solid);
00662 LogDebug("TIBGeom") << "DDTIBLayerAlgo_MTCC test: "
00663 << DDName(name, idNameSpace) << " Box made of "
00664 << dohmCableMaterial << " of dimensions " << dx_cable
00665 << ", " << dy_cable << ", " << dz_cable;
00666
00667 tran = DDTranslation(rout_dohm+0.5*dohmPrimT, -0.75*dohmPrimW , 0.);
00668 DDpos (dohmPrim, dohmCarrierPrimAux_lo_r, 1, tran, DDRotation() );
00669 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmAux.name()
00670 << " z+ number " << 1 << " positioned in "
00671 << dohmCarrierPrimAux_lo_r.name() << " at " << tran
00672 << " with no rotation";
00673 tran = DDTranslation(rout_dohm+dx_cable, -0.75*dohmPrimW+0.5*dohmPrimW , 0.);
00674 DDpos (dohmCablePrim, dohmCarrierPrimAux_lo_r, 1, tran, DDRotation() );
00675 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCablePrim.name()
00676 << " copy number " << 1 << " positioned in "
00677 << dohmCarrierPrimAux_lo_r.name() << " at " << tran
00678 << " with no rotation";
00679 tran = DDTranslation(rout_dohm+dx_cable, -0.75*dohmPrimW-0.5*dohmPrimW , 0.);
00680 DDpos (dohmCablePrim, dohmCarrierPrimAux_lo_r, 2, tran, DDRotation() );
00681 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCablePrim.name()
00682 << " copy number " << 2 << " positioned in "
00683 << dohmCarrierPrimAux_lo_r.name() << " at " << tran
00684 << " with no rotation";
00685 tran = DDTranslation(rout_dohm+0.5*dohmAuxT, 0.75*dohmAuxW , 0.);
00686 DDpos (dohmAux, dohmCarrierPrimAux_lo_r, 1, tran, DDRotation() );
00687 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmAux.name()
00688 << " z+ number " << 1 << " positioned in "
00689 << dohmCarrierPrimAux_lo_r.name()
00690 << " at (0,0,0) with no rotation";
00691 tran = DDTranslation(rout_dohm+dx_cable, 0.75*dohmAuxW+0.5*dohmPrimW , 0.);
00692 DDpos (dohmCableAux, dohmCarrierPrimAux_lo_r, 1, tran, DDRotation() );
00693 LogDebug("TIBGeom") << "DDTIBLayer_MTCC test " << dohmCableAux.name()
00694 << " copy number " << 1 << " positioned in "
00695 << dohmCarrierPrimAux_lo_r.name()
00696 << " at " << tran << " with no rotation";
00697 }
1.5.4