L1RCTProducer.cc

Go to the documentation of this file.

#include "L1Trigger/RegionalCaloTrigger/interface/L1RCTProducer.h" 

// RunInfo stuff
#include "CondFormats/RunInfo/interface/RunInfo.h"
#include "FWCore/Framework/interface/Run.h"
#include "FWCore/Framework/interface/LuminosityBlock.h"

#include <vector>
using std::vector;
#include <iostream>



using std::cout;
using std::endl;
const int L1RCTProducer::crateFED[18][6]=
    {{613, 614, 603, 702, 718, 1118},
    {611, 612, 602, 700, 718, 1118},
    {627, 610, 601, 716, 722, 1122},
    {625, 626, 609, 714, 722, 1122},
    {623, 624, 608, 712, 722, 1122},
    {621, 622, 607, 710, 720, 1120},
    {619, 620, 606, 708, 720, 1120},
    {617, 618, 605, 706, 720, 1120},
    {615, 616, 604, 704, 718, 1118},
    {631, 632, 648, 703, 719, 1118},
    {629, 630, 647, 701, 719, 1118},
    {645, 628, 646, 717, 723, 1122},
    {643, 644, 654, 715, 723, 1122},
    {641, 642, 653, 713, 723, 1122},
    {639, 640, 652, 711, 721, 1120},
    {637, 638, 651, 709, 721, 1120},
    {635, 636, 650, 707, 721, 1120},
    {633, 634, 649, 705, 719, 1118}};

L1RCTProducer::L1RCTProducer(const edm::ParameterSet& conf) : 
  rctLookupTables(new L1RCTLookupTables),
  rct(new L1RCT(rctLookupTables)),
  useEcal(conf.getParameter<bool>("useEcal")),
  useHcal(conf.getParameter<bool>("useHcal")),
  ecalDigis(conf.getParameter<std::vector<edm::InputTag> >("ecalDigis")),
  hcalDigis(conf.getParameter<std::vector<edm::InputTag> >("hcalDigis")),
  bunchCrossings(conf.getParameter<std::vector<int> >("BunchCrossings")),
  getFedsFromOmds(conf.getParameter<bool>("getFedsFromOmds")),
  queryDelayInLS(conf.getParameter<unsigned int>("queryDelayInLS")),
  queryIntervalInLS(conf.getParameter<unsigned int>("queryIntervalInLS")),
  conditionsLabel(conf.getParameter<std::string>("conditionsLabel")),
  fedUpdatedMask(0)
{
  produces<L1CaloEmCollection>();
  produces<L1CaloRegionCollection>();

  for(unsigned int ihc=0;ihc<hcalDigis.size();ihc++){
    consumes<edm::SortedCollection<HcalTriggerPrimitiveDigi,edm::StrictWeakOrdering<HcalTriggerPrimitiveDigi> > >(hcalDigis[ihc]);
  }

  for(unsigned int iec=0;iec<ecalDigis.size();iec++){
    consumes<edm::SortedCollection<EcalTriggerPrimitiveDigi,edm::StrictWeakOrdering<EcalTriggerPrimitiveDigi> > >(ecalDigis[iec]);
  }
}

L1RCTProducer::~L1RCTProducer()
{
  if(rct != 0) delete rct;
  if(rctLookupTables != 0) delete rctLookupTables;
  if(fedUpdatedMask != 0) delete fedUpdatedMask;
}


void L1RCTProducer::beginRun(edm::Run const& run, const edm::EventSetup& eventSetup)
{
  //  std::cout << "getFedsFromOmds is " << getFedsFromOmds << std::endl;

  updateConfiguration(eventSetup);
  
  int runNumber = run.run();
  updateFedVector(eventSetup,false,runNumber); // RUNINFO ONLY at beginning of run

}


void L1RCTProducer::beginLuminosityBlock(edm::LuminosityBlock const& lumiSeg,const edm::EventSetup& context)
{
  // check LS number every LS, if the checkOMDS flag is set AND it's the right LS, update the FED vector from OMDS
  // can pass the flag as the bool??  but only check LS number if flag is true anyhow
  if (getFedsFromOmds)
    {
      unsigned int nLumi = lumiSeg.luminosityBlock(); // doesn't even need the (unsigned int) cast because LuminosityBlockNumber_t is already an unsigned int
      // LS count starts at 1, want to be able to delay 0 LS's intuitively
      if ( ( (nLumi - 1) == queryDelayInLS) 
       || (queryIntervalInLS > 0 && nLumi % queryIntervalInLS == 0 ) ) // to guard against problems if online DQM crashes; every 100 LS is ~20-30 minutes, not too big a load, hopefully not too long between
    {
      int runNumber = lumiSeg.run();
      //      std::cout << "Lumi section for this FED vector update is " << nLumi << std::endl;
      updateFedVector(context,true,runNumber); // OMDS
    }
      else if (queryIntervalInLS <= 0)
    {
      // don't do interval checking... cout message??
    }
    }
} 



void L1RCTProducer::updateConfiguration(const edm::EventSetup& eventSetup)
{
  // Refresh configuration information every event
  // Hopefully, this does not take too much time
  // There should be a call back function in future to
  // handle changes in configuration
  // parameters to configure RCT (thresholds, etc)
  edm::ESHandle<L1RCTParameters> rctParameters;
  eventSetup.get<L1RCTParametersRcd>().get(conditionsLabel, rctParameters);
  const L1RCTParameters* r = rctParameters.product();

  //SCALES

  // energy scale to convert eGamma output
  edm::ESHandle<L1CaloEtScale> emScale;
  eventSetup.get<L1EmEtScaleRcd>().get(conditionsLabel, emScale);
  const L1CaloEtScale* s = emScale.product();

 // get energy scale to convert input from ECAL
  edm::ESHandle<L1CaloEcalScale> ecalScale;
  eventSetup.get<L1CaloEcalScaleRcd>().get(conditionsLabel, ecalScale);
  const L1CaloEcalScale* e = ecalScale.product();
  
  // get energy scale to convert input from HCAL
  edm::ESHandle<L1CaloHcalScale> hcalScale;
  eventSetup.get<L1CaloHcalScaleRcd>().get(conditionsLabel, hcalScale);
  const L1CaloHcalScale* h = hcalScale.product();

  // set scales
  rctLookupTables->setEcalScale(e);
  rctLookupTables->setHcalScale(h);

  rctLookupTables->setRCTParameters(r);
  rctLookupTables->setL1CaloEtScale(s);
}


void L1RCTProducer::updateFedVector(const edm::EventSetup& eventSetup, bool getFromOmds, int runNumber) // eventSetup apparently doesn't include run number: http://cmslxr.fnal.gov/lxr/source/FWCore/Framework/interface/EventSetup.h
{
  // list of RCT channels to mask
  edm::ESHandle<L1RCTChannelMask> channelMask;
  eventSetup.get<L1RCTChannelMaskRcd>().get(channelMask);
  const L1RCTChannelMask* cEs = channelMask.product();


  // list of Noisy RCT channels to mask
  edm::ESHandle<L1RCTNoisyChannelMask> hotChannelMask;
  eventSetup.get<L1RCTNoisyChannelMaskRcd>().get(hotChannelMask);
  const L1RCTNoisyChannelMask* cEsNoise = hotChannelMask.product();
  rctLookupTables->setNoisyChannelMask(cEsNoise);


  
  //Update the channel mask according to the FED VECTOR
  //This is the beginning of run. We delete the old
  //create the new and set it in the LUTs

  if(fedUpdatedMask!=0) delete fedUpdatedMask;

  fedUpdatedMask = new L1RCTChannelMask();
  // copy a constant object
  for (int i = 0; i < 18; i++)
    {
      for (int j = 0; j < 2; j++)
    {
      for (int k = 0; k < 28; k++)
        {
          fedUpdatedMask->ecalMask[i][j][k] = cEs->ecalMask[i][j][k];
          fedUpdatedMask->hcalMask[i][j][k] = cEs->hcalMask[i][j][k] ;
        }
      for (int k = 0; k < 4; k++)
        {
          fedUpdatedMask->hfMask[i][j][k] = cEs->hfMask[i][j][k];
        }
    }
    }


//   // adding fed mask into channel mask
  
  const std::vector<int> Feds = getFromOmds ? getFedVectorFromOmds(eventSetup) : getFedVectorFromRunInfo(eventSetup); 
  // so can create/initialize/assign const quantity in one line accounting for if statement
  // wikipedia says this is exactly what it's for: http://en.wikipedia.org/wiki/%3F:#C.2B.2B

//   std::cout << "Contents of ";
//   std::cout << (getFromOmds ? "OMDS RunInfo" : "standard RunInfo");
//   std::cout << " FED vector" << std::endl;
//   printFedVector(Feds);

  bool useUpgradedHF=false;

  std::vector<int> caloFeds;  // pare down the feds to the interesting ones
  // is this unneccesary?
  // Mike B : This will decrease the find speed so better do it
  for(std::vector<int>::const_iterator cf = Feds.begin(); cf != Feds.end(); ++cf)
    {
      int fedNum = *cf;
      if((fedNum > 600 && fedNum <724) || fedNum==1118 || fedNum == 1120 || fedNum == 1122) 
    caloFeds.push_back(fedNum);

      if(fedNum==1118 || fedNum == 1120 || fedNum == 1122) useUpgradedHF=true;
  
    }

  for(int  cr = 0; cr < 18; ++cr)
    {
      
      for(crateSection cs = c_min; cs <= c_max; cs = crateSection(cs +1)) 
    {
      bool fedFound = false;
      
      //Try to find the FED
      std::vector<int>::iterator fv= std::find(caloFeds.begin(),caloFeds.end(),crateFED[cr][cs]);
      if(fv!=caloFeds.end())
        fedFound = true;
     

 
      if(!fedFound) {
        int eta_min=0;
        int eta_max=0;
        bool phi_even[2] = {false};//, phi_odd = false;
        bool ecal=false;
        
        switch (cs) {
        case ebEvenFed :
          eta_min = minBarrel;
          eta_max = maxBarrel;
          phi_even[0] = true;
          ecal = true;  
          break;
          
        case ebOddFed:
          eta_min = minBarrel;
          eta_max = maxBarrel;
          phi_even[1] = true;
          ecal = true;  
          break;
          
        case eeFed:
          eta_min = minEndcap;
          eta_max = maxEndcap;
          phi_even[0] = true;
          phi_even[1] = true;
          ecal = true;  
          break;    
          
        case hbheFed:
          eta_min = minBarrel;
          eta_max = maxEndcap;
          phi_even[0] = true;
          phi_even[1] = true;
          ecal = false;
          break;
          
        case hfFed: 
          if(useUpgradedHF) break;

          eta_min = minHF;
          eta_max = maxHF;
          
          phi_even[0] = true;
          phi_even[1] = true;
          ecal = false;
          break;

        case hfFedUp:
          if(!useUpgradedHF) break;

          eta_min = minHF;
          eta_max = maxHF;

          phi_even[0] = true;
          phi_even[1] = true;
          ecal = false;
          break;


        default:
          break;
          
        }
        for(int ieta = eta_min; ieta <= eta_max; ++ieta)
          {
        if(ieta<=28) // barrel and endcap
          for(int even = 0; even<=1 ; even++)
            {    
              if(phi_even[even])
            {
              if(ecal)
                fedUpdatedMask->ecalMask[cr][even][ieta-1] = true;
              else
                fedUpdatedMask->hcalMask[cr][even][ieta-1] = true;
            }
            }
        else
          for(int even = 0; even<=1 ; even++)
            if(phi_even[even])
              fedUpdatedMask->hfMask[cr][even][ieta-29] = true;
        
          }
      }
    }
    }
  
  rctLookupTables->setChannelMask(fedUpdatedMask); 

}

const std::vector<int> L1RCTProducer::getFedVectorFromRunInfo(const edm::EventSetup& eventSetup)
{
  //  std::cout << "Getting FED vector from standard RunInfo object" << std::endl;
  // get FULL FED vector from RUNINFO
  edm::ESHandle<RunInfo> sum;
  eventSetup.get<RunInfoRcd>().get(sum);
  const RunInfo* summary=sum.product();
  const std::vector<int> fedvector = summary->m_fed_in;

  return fedvector;
}


const std::vector<int> L1RCTProducer::getFedVectorFromOmds(const edm::EventSetup& eventSetup)
{

  //  std::cout << "Getting FED vector from my specific ES RunInfo object" << std::endl;

  // get FULL FED vector from RunInfo object specifically created to have OMDS fed vector
  edm::ESHandle<RunInfo> sum;
  eventSetup.get<RunInfoRcd>().get("OmdsFedVector",sum); // using label to get my specific instance of RunInfo
  if (sum.isValid())
    {
      const RunInfo* summary=sum.product();
      const std::vector<int> fedvector = summary->m_fed_in;

      return fedvector;
    }
  else
    {
      return getFedVectorFromRunInfo(eventSetup);
    }
  
}



void L1RCTProducer::produce(edm::Event& event, const edm::EventSetup& eventSetup)
{


  std::unique_ptr<L1CaloEmCollection> rctEmCands (new L1CaloEmCollection);
  std::unique_ptr<L1CaloRegionCollection> rctRegions (new L1CaloRegionCollection);


  if(!(ecalDigis.size()==hcalDigis.size()&&hcalDigis.size()==bunchCrossings.size()))
      throw cms::Exception("BadInput")
    << "From what I see the number of your your ECAL input digi collections.\n"
        <<"is different from the size of your HCAL digi input collections\n"
    <<"or the size of your BX factor collection" 
        <<"They must be the same to correspond to the same Bxs\n"
    << "It does not matter if one of them is empty\n"; 




  // loop through and process each bx
    for (unsigned short sample = 0; sample < bunchCrossings.size(); sample++)
      {
    edm::Handle<EcalTrigPrimDigiCollection> ecal;
    edm::Handle<HcalTrigPrimDigiCollection> hcal;

    EcalTrigPrimDigiCollection ecalIn;
    HcalTrigPrimDigiCollection hcalIn;


    if(useHcal&&event.getByLabel(hcalDigis[sample], hcal))
      hcalIn = *hcal;

    if(useEcal&&event.getByLabel(ecalDigis[sample],ecal))
      ecalIn = *ecal;

    rct->digiInput(ecalIn,hcalIn);
    rct->processEvent();

      // Stuff to create
    for (int j = 0; j<18; j++)
      {
        L1CaloEmCollection isolatedEGObjects = rct->getIsolatedEGObjects(j);
        L1CaloEmCollection nonisolatedEGObjects = rct->getNonisolatedEGObjects(j);
        for (int i = 0; i<4; i++) 
          {
        isolatedEGObjects.at(i).setBx(bunchCrossings[sample]);
        nonisolatedEGObjects.at(i).setBx(bunchCrossings[sample]);
        rctEmCands->push_back(isolatedEGObjects.at(i));
        rctEmCands->push_back(nonisolatedEGObjects.at(i));
          }
      }
      
      
    for (int i = 0; i < 18; i++)
      {
        std::vector<L1CaloRegion> regions = rct->getRegions(i);
        for (int j = 0; j < 22; j++)
          {
        regions.at(j).setBx(bunchCrossings[sample]);
        rctRegions->push_back(regions.at(j));
          }
      }

      }

  
  //putting stuff back into event
  event.put(std::move(rctEmCands));
  event.put(std::move(rctRegions));
  
}

// print contents of (FULL) FED vector
void L1RCTProducer::printFedVector(const std::vector<int>& fedVector)
{
  std::cout << "Contents of given fedVector: ";
  std::copy(fedVector.begin(), fedVector.end(), std::ostream_iterator<int>(std::cout, ", "));
  std::cout << std::endl;
}

// print contents of RCT channel mask fedUpdatedMask
void L1RCTProducer::printUpdatedFedMask()
{
  if (fedUpdatedMask != 0)
    {
      fedUpdatedMask->print(std::cout);
    }
  else
    {
      std::cout << "Trying to print contents of fedUpdatedMask, but it doesn't exist!" << std::endl;
    }
}

// print contents of RCT channel mask fedUpdatedMask
void L1RCTProducer::printUpdatedFedMaskVerbose()
{
  if (fedUpdatedMask != 0)
    {
      // print contents of fedvector
      std::cout << "Contents of fedUpdatedMask: ";
//       std::copy(fedUpdatedMask.begin(), fedUpdatedMask.end(), std::ostream_iterator<int>(std::cout, ", "));
      std::cout << "--> ECAL mask: " << std::endl;
      for (int i = 0; i < 18; i++)
    {
      for (int j = 0; j < 2; j++)
        {
          for (int k = 0; k < 28; k++)
        {
          std::cout << fedUpdatedMask->ecalMask[i][j][k] << ", ";
        }
        }
    }
      std::cout << "--> HCAL mask: " << std::endl;
      for (int i = 0; i < 18; i++)
    {
      for (int j = 0; j < 2; j++)
        {
          for (int k = 0; k < 28; k++)
        {
          std::cout << fedUpdatedMask->hcalMask[i][j][k] << ", ";
        }
        }
    }
      std::cout << "--> HF mask: " << std::endl;
      for (int i = 0; i < 18; i++)
    {
      for (int j = 0; j < 2; j++)
        {
          for (int k = 0; k < 4; k++)
        {
          std::cout << fedUpdatedMask->hfMask[i][j][k] << ", ";
        }
        }
    }

      std::cout << std::endl;
    }
  else
    {
      //print error message
      std::cout << "Trying to print contents of fedUpdatedMask, but it doesn't exist!" << std::endl;
    }
}