#include <MeasurementSensor2D.h>

Inheritance diagram for MeasurementSensor2D:

Public Member Functions
void	calculateSimulatedValue (ALIbool firstTime) override

void	correctValueAndSigma () override

	MeasurementSensor2D (const ALIint measdim, ALIstring &type, ALIstring &name)

	MeasurementSensor2D ()

void	setConversionFactor (const std::vector< ALIstring > &wordlist) override

	~MeasurementSensor2D () override

Public Member Functions inherited from Measurement
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)

void	AddOptOListItem (OpticalObject *opto)

void	AddOptONameListItem (ALIstring optos)

const std::vector< Entry * > &	affectingEntryList () const

void	buildAffectingEntryList ()

void	buildOptOList ()

virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)

void	calculateOriginalSimulatedValue ()

void	construct ()

void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)

void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)

std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)

const ALIuint	dim () const

void	DumpBadOrderOptOs ()

void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)

void	fillData (ALIuint coor, OpticalAlignParam *oaParam)

const CLHEP::Hep3Vector &	getLightRayDirection () const

const CLHEP::Hep3Vector &	getLightRayPosition () const

ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject * >::const_iterator vocite)

const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const

	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)

	Measurement ()

const ALIstring &	name () const

const std::vector< OpticalObject * > &	OptOList () const

const std::vector< ALIstring > &	OptONameList () const

void	postConstruct ()

const ALIstring &	sensorName ()

void	SetDimension (ALIuint dim)

void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)

void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)

void	setName ()

void	setSigma (ALIint coor, ALIdouble val)

void	setType (ALIstring type)

void	setValue (ALIint coor, ALIdouble val)

void	setValueSimulated (ALIint coor, ALIdouble value)

void	setValueSimulated_orig (ALIint coor, ALIdouble value)

virtual void	setXlaserLine (ALIuint ii, int val)

const ALIdouble *	sigma () const

const ALIdouble	sigma (ALIuint ii) const

virtual const ALIdouble	sigmaDimensionFactor () const

const ALIstring &	type () const

const ALIdouble *	value () const

const ALIdouble	value (ALIuint ii) const

virtual const ALIdouble	valueDimensionFactor () const

bool	valueIsSimulated (ALIint coor)

const ALIdouble	valueSimulated (ALIuint ii) const

const ALIdouble	valueSimulated_orig (ALIuint ii) const

const ALIstring	valueType (ALIuint ii) const

virtual int	xlaserLine (ALIuint ii)

virtual	~Measurement ()

Private Attributes
ALIdouble	theDisplaceX

ALIdouble	theDisplaceY

ALIdouble	theMultiplyX

ALIdouble	theMultiplyY

Additional Inherited Members
Static Public Member Functions inherited from Measurement
static ALIstring	getCurrentDate ()

static ALIstring	getCurrentTime ()

static ALIstring &	measurementsFileName ()

static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...

static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes inherited from Measurement
static ALIdouble	cameraScaleFactor = 1.

static ALIbool	only1 = false

static ALIstring	only1Date = ""

static ALIstring	only1Time = ""

Protected Member Functions inherited from Measurement
void	printStartCalculateSimulatedValue (const Measurement *meas)

void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Detailed Description

Definition at line 18 of file MeasurementSensor2D.h.

Constructor & Destructor Documentation

MeasurementSensor2D::MeasurementSensor2D	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

inline

Definition at line 21 of file MeasurementSensor2D.h.

21 : Measurement( measdim, type, name ){ };

type

Definition: HCALResponse.h:21

Measurement::Measurement

Measurement()

Definition: Measurement.h:32

Measurement::name

const ALIstring & name() const

Definition: Measurement.h:90

MeasurementSensor2D::MeasurementSensor2D ( )

inline

Definition at line 22 of file MeasurementSensor2D.h.

22 { };

MeasurementSensor2D::~MeasurementSensor2D ( )

inlineoverride

Definition at line 23 of file MeasurementSensor2D.h.

References calculateSimulatedValue(), correctValueAndSigma(), and setConversionFactor().

23 { };

Member Function Documentation

void MeasurementSensor2D::calculateSimulatedValue ( ALIbool firstTime )

overridevirtual

Reimplemented from Measurement.

Definition at line 25 of file MeasurementSensor2D.cc.

References MessageLogger_cfi::cerr, gather_cfg::cout, ALIUtils::debug, Measurement::DumpBadOrderOptOs(), end, cmsRelvalreport::exit, ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), Measurement::getMeasuringBehaviour(), GlobalOptionMgr::GlobalOptions(), Measurement::name(), Measurement::OptOList(), LightRay::point(), Measurement::printStartCalculateSimulatedValue(), and findQualityFiles::size.

Referenced by ~MeasurementSensor2D().

 {
  
   if( ALIUtils::debug >= 2) printStartCalculateSimulatedValue( this ); // important
   //---------- Create light ray
   LightRay* lightray = new LightRay;
 
   int isec = 0;  //security variable to check OptOList().size()
 
   //---------- Loop list of OptO that take part in measurement
   std::vector<OpticalObject*>::const_iterator vocite =  OptOList().begin();
   //-  if( ALIUtils::debug >= 5) std::cout  << "OptOList size" <<OptOList().size() << std::endl;
 
   //----- Check that first object is 'laser' or 'source'
   if( (*vocite)->type() != "laser" && (*vocite)->type() != "source" ) { 
     std::cerr << " first Optical object should be 'laser' or 'source'" << std::endl;
     DumpBadOrderOptOs();
     exit(1);
   }     
 #ifdef COCOA_VIS
   ALIVisLightPath* vispath = 0;
   if( ALIUtils::getFirstTime() ) {
     GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
     if(gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
       vispath = IgCocoaFileMgr::getInstance().newLightPath( name() );
     } 
   }
 #endif
 
   //-  while( (*vocite) !=  *(OptOList().end()) ) {
   while( (vocite) !=  (OptOList().end()) ) {
     if( ALIUtils::debug >= 2) std::cout << std::endl << "@@@@ LR:OBJECT " << (*vocite)->name() << std::endl;  
     isec ++;
 
     //---------- Get the behaviour of the object w.r.t the measurement (if it reflects the light, let it traverse it, ...)
     ALIstring behav = getMeasuringBehaviour(vocite);
 
     //---------- Check that last object is a Sensor (that makes measuremnt and kill the lightray)
     if( lightray ) {
       (*vocite)->participateInMeasurement( *lightray, *this, behav );
 
 #ifdef COCOA_VIS
       if( ALIUtils::getFirstTime() ) {
     GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
     if(gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
       ALIVRMLMgr::getInstance().addLightPoint( lightray->point() );
       if(ALIUtils::debug >= 5)std::cout << "ALIVRMLMg  addLightPoint " << lightray->point() << (*vocite)->name() << std::endl;
     }
     if(gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
       vispath->addLightPoint( lightray->point(), (*vocite) );
     }
       }
 #endif
 
     } else {
       std::cerr << "!! Last object is not Sensor 2D in measurement " << name() << std::endl;
       DumpBadOrderOptOs();
       exit(1);
     }
 
     ++vocite;
     if ( isec > ALIint(OptOList().size()) ) {
       std::cerr << "ERROR DE PROGRAMACION EN GetSimulatedValue" << std::endl;
       exit(5);
     }
     //-    lightray.normalizeDirection();
   }
 
   delete lightray;
  
   if(ALIUtils::debug >= 9) std::cout << "end calculateSimulatedValue" <<std::endl;
   
 }

void MeasurementSensor2D::correctValueAndSigma ( )

overridevirtual

Reimplemented from Measurement.

Definition at line 139 of file MeasurementSensor2D.cc.

References gather_cfg::cout, ALIUtils::debug, Measurement::setValue(), theDisplaceX, theDisplaceY, theMultiplyX, theMultiplyY, heppy_batch::val, and Measurement::value().

Referenced by ~MeasurementSensor2D().

 {
    //---------- Make  displacement
   ALIdouble val = value()[0];
   val += theDisplaceX;
   val *= theMultiplyX;
   //-  std::cout << " theDisplaceX " <<  theDisplaceX << " theMultiplyX " << theMultiplyX << std::endl;
   if(ALIUtils::debug >= 4) std::cout << "MeasurementSensor2D::correctValueAndSigma: " << " old value X " << value()[0] << " new " << val << std::endl;
   setValue( 0, val );
 
   val = value()[1];
   val += theDisplaceY;
   val *= theMultiplyY;
   if(ALIUtils::debug >= 4) std::cout << "MeasurementSensor2D::correctValueAndSigma: old value Y " << value()[1] << " new " << val << std::endl;
   setValue( 1, val );
 
 }

void MeasurementSensor2D::setConversionFactor ( const std::vector< ALIstring > & wordlist )

overridevirtual

Reimplemented from Measurement.

Definition at line 106 of file MeasurementSensor2D.cc.

References MessageLogger_cfi::cerr, ALIUtils::dumpVS(), cmsRelvalreport::exit, ALIUtils::IsNumber(), theDisplaceX, theDisplaceY, theMultiplyX, theMultiplyY, and Measurement::valueDimensionFactor().

Referenced by ~MeasurementSensor2D().

 {
   //--------- Check that the format is OK
   theDisplaceX = 0;
   theDisplaceY = 0;
   theMultiplyX = 1.;
   theMultiplyY = 1.;
   //-  std::cout << " 0 factors for correction X = " << theDisplaceX << " Y " << theDisplaceY << std::endl;
  
   if(wordlist.size() == 1) return; 
   if( (wordlist.size() != 3 && wordlist.size() != 5 )
       || !ALIUtils::IsNumber(wordlist[1]) || !ALIUtils::IsNumber(wordlist[2]) ) {
     std::cerr << "!! Sensor2D Measurement setConversionFactor: WRONG FORMAT "<<  std::endl 
      << "It should be: SENSOR2D displace_X displace_Y " << std::endl 
      << "It is: ";
     ALIUtils::dumpVS( wordlist, " ", std::cerr );
     exit(1);
   }
   theDisplaceX = atof(wordlist[1].c_str())* valueDimensionFactor();
   theDisplaceY = atof(wordlist[2].c_str())* valueDimensionFactor();
   //-  std::cout << " factors for correction X = " << theDisplaceX << " Y " << theDisplaceY << std::endl;
 
   if( wordlist.size() == 5 ) {
     theMultiplyX = atof(wordlist[3].c_str());
     theMultiplyY = atof(wordlist[4].c_str());
   } else {
     theMultiplyX = 1.;
     theMultiplyY = 1.;
   }  
 }