#include <SingleTopTChannelLeptonDQM.h>

Public Types
enum	Level { STANDARD, VERBOSE, DEBUG }
	different verbosity levels More...

Public Member Functions
void	book (DQMStore::IBooker &ibooker)
	book histograms in subdirectory directory More...

void	fill (const edm::Event &event, const edm::EventSetup &setup)
	fill monitor histograms with electronId and jetCorrections More...

	MonitorEnsemble (const char *label, const edm::ParameterSet &cfg, const edm::VParameterSet &vcfg, edm::ConsumesCollector &&iC)
	default contructor More...

	~MonitorEnsemble ()
	default destructor More...

Private Member Functions
bool	booked (const std::string histName) const
	check if histogram was booked More...

void	fill (const edm::Event &event, const edm::TriggerResults &triggerTable, std::string channel, const std::vector< std::string > labels) const
	fill trigger monitoring histograms More...

void	fill (const std::string histName, double value) const
	fill histogram if it had been booked before More...

void	fill (const std::string histName, double xValue, double yValue) const
	fill histogram if it had been booked before (2-dim version) More...

void	fill (const std::string histName, double xValue, double yValue, double zValue) const
	fill histogram if it had been booked before (2-dim version) More...

std::string	monitorPath (const std::string &label) const

std::string	selectionPath (const std::string &label) const

void	triggerBinLabels (std::string channel, const std::vector< std::string > labels)
	set configurable labels for trigger monitoring histograms More...

Private Attributes
edm::EDGetTokenT< reco::JetTagCollection >	btagCombVtx_

double	btagCombVtxWP_

edm::EDGetTokenT< reco::JetTagCollection >	btagEff_
	btag discriminator labels More...

double	btagEffWP_
	btag working points More...

edm::EDGetTokenT< reco::JetTagCollection >	btagPur_

double	btagPurWP_

edm::EDGetTokenT< reco::JetTagCollection >	btagVtx_

double	btagVtxWP_

std::string	directory_

double	eidCutValue_

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate, true > >	elecIso

std::string	elecIso_
	extra isolation criterion on electron More...

edm::EDGetTokenT< edm::View< reco::PFCandidate > >	elecs_

edm::EDGetTokenT< edm::View< reco::GsfElectron > >	elecs_gsf_

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate, true > >	elecSelect

std::string	elecSelect_
	extra selection on electrons More...

edm::EDGetTokenT< edm::ValueMap< float > >	electronId_
	electronId label More...

std::map< std::string, MonitorElement * >	hists_

bool	includeBTag_

std::string	jetCorrector_
	jetCorrector More...

edm::EDGetTokenT< reco::JetIDValueMap >	jetIDLabel_
	jetID as an extra selection type More...

std::unique_ptr< StringCutObjectSelector< reco::JetID > >	jetIDSelect_
	extra jetID selection on calo jets More...

edm::EDGetTokenT< edm::View< reco::Jet > >	jets_
	input sources for monitoring More...

std::string	jetSelect_

std::unique_ptr< StringCutObjectSelector< reco::CaloJet > >	jetSelectCalo

std::unique_ptr< StringCutObjectSelector< reco::Jet > >	jetSelectJet

std::unique_ptr< StringCutObjectSelector< reco::PFJet > >	jetSelectPF

std::string	label_
	instance label More...

int	logged_
	number of logged interesting events More...

double	lowerEdge_
	mass window upper and lower edge More...

std::vector< edm::EDGetTokenT< edm::View< reco::MET > > >	mets_
	considers a vector of METs More...

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate, true > >	muonIso

std::string	muonIso_
	extra isolation criterion on muon More...

edm::EDGetTokenT< edm::View< reco::PFCandidate > >	muons_

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate, true > >	muonSelect

std::string	muonSelect_
	extra selection on muons More...

edm::EDGetTokenT< edm::View< reco::Vertex > >	pvs_

std::unique_ptr< StringCutObjectSelector< reco::Vertex > >	pvSelect_

edm::EDConsumerBase	tmpConsumerBase

std::vector< std::string >	triggerPaths_

edm::EDGetTokenT< edm::TriggerResults >	triggerTable_
	trigger table More...

double	upperEdge_

Level	verbosity_
	verbosity level for booking More...

Detailed Description

Definition at line 54 of file SingleTopTChannelLeptonDQM.h.

Member Enumeration Documentation

enum SingleTopTChannelLepton::MonitorEnsemble::Level

different verbosity levels

Enumerator
STANDARD
VERBOSE
DEBUG

Definition at line 57 of file SingleTopTChannelLeptonDQM.h.

              {
     STANDARD,
     VERBOSE,
     DEBUG
   };

Constructor & Destructor Documentation

MonitorEnsemble::MonitorEnsemble	(	const char *	label,
		const edm::ParameterSet &	cfg,
		const edm::VParameterSet &	vcfg,
		edm::ConsumesCollector &&	iC
	)

default contructor

Definition at line 24 of file SingleTopTChannelLeptonDQM.cc.

References btagCombVtx_, btagCombVtxWP_, DEBUG, directory_, eidCutValue_, elecIso, elecIso_, elecs_, elecs_gsf_, elecSelect, elecSelect_, electronId_, edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), includeBTag_, jetCorrector_, jetIDLabel_, jetIDSelect_, jets_, jetSelect_, lowerEdge_, mets_, TtFullHadSignalSelMVATrainTreeSaver_cff::monitoring, muonIso, muonIso_, muons_, muonSelect, muonSelect_, pvs_, pvSelect_, STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, GlobalPosition_Frontier_DevDB_cff::tag, triggerPaths_, triggerTable_, upperEdge_, VERBOSE, and verbosity_.

     : label_(label),
       pvSelect_(nullptr),
       jetIDSelect_(nullptr),
       includeBTag_(false),
       lowerEdge_(-1.),
       upperEdge_(-1.),
       logged_(0) {
   // sources have to be given; this PSet is not optional
   edm::ParameterSet sources = cfg.getParameter<edm::ParameterSet>("sources");
   muons_ = iC.consumes<edm::View<reco::PFCandidate>>(
       sources.getParameter<edm::InputTag>("muons"));
   elecs_gsf_ = iC.consumes<edm::View<reco::GsfElectron>>(
       sources.getParameter<edm::InputTag>("elecs_gsf"));
   elecs_ = iC.consumes<edm::View<reco::PFCandidate>>(
       sources.getParameter<edm::InputTag>("elecs"));
   jets_ = iC.consumes<edm::View<reco::Jet>>(
       sources.getParameter<edm::InputTag>("jets"));
   for (edm::InputTag const& tag :
        sources.getParameter<std::vector<edm::InputTag>>("mets"))
     mets_.push_back(iC.consumes<edm::View<reco::MET>>(tag));
   pvs_ = iC.consumes<edm::View<reco::Vertex>>(
       sources.getParameter<edm::InputTag>("pvs"));
   // electronExtras are optional; they may be omitted or
   // empty
   if (cfg.existsAs<edm::ParameterSet>("elecExtras")) {
     edm::ParameterSet elecExtras =
         cfg.getParameter<edm::ParameterSet>("elecExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (elecExtras.existsAs<std::string>("select")) {
       elecSelect_ = vcfg[1].getParameter<std::string>("select");
     }
     // isolation is optional; in case it's not found no
     // isolation will be applied
     if (elecExtras.existsAs<std::string>("isolation")) {
       elecIso_ = elecExtras.getParameter<std::string>("isolation");
     }
 
 
     // electronId is optional; in case it's not found the
     // InputTag will remain empty
     if (elecExtras.existsAs<edm::ParameterSet>("electronId")) {
       edm::ParameterSet elecId =
           elecExtras.getParameter<edm::ParameterSet>("electronId");
       electronId_ = iC.consumes<edm::ValueMap<float>>(
           elecId.getParameter<edm::InputTag>("src"));
       eidCutValue_ = elecId.getParameter<double>("cutValue");
     }
   }
   // pvExtras are opetional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("pvExtras")) {
     edm::ParameterSet pvExtras =
         cfg.getParameter<edm::ParameterSet>("pvExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (pvExtras.existsAs<std::string>("select")) {
       pvSelect_.reset(new StringCutObjectSelector<reco::Vertex>(
           pvExtras.getParameter<std::string>("select")));
     }
   }
   // muonExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>(
           "muonExtras")) {  // && vcfg.existsAs<std::vector<edm::ParameterSet>
                             // >("selection")){
     edm::ParameterSet muonExtras =
         cfg.getParameter<edm::ParameterSet>("muonExtras");
 
     // select is optional; in case it's not found no
     // selection will be applied
     if (muonExtras.existsAs<std::string>("select")) {
       muonSelect_ = vcfg[1].getParameter<std::string>("select");
     }
     // isolation is optional; in case it's not found no
     // isolation will be applied
     if (muonExtras.existsAs<std::string>("isolation")) {
       muonIso_ = muonExtras.getParameter<std::string>("isolation");
     }
   }
 
 
   // jetExtras are optional; they may be omitted or
   // empty
   if (cfg.existsAs<edm::ParameterSet>("jetExtras")) {
     edm::ParameterSet jetExtras =
         cfg.getParameter<edm::ParameterSet>("jetExtras");
     // jetCorrector is optional; in case it's not found
     // the InputTag will remain empty
     if (jetExtras.existsAs<std::string>("jetCorrector")) {
       jetCorrector_ = jetExtras.getParameter<std::string>("jetCorrector");
     }
     // read jetID information if it exists
     if (jetExtras.existsAs<edm::ParameterSet>("jetID")) {
       edm::ParameterSet jetID =
           jetExtras.getParameter<edm::ParameterSet>("jetID");
       jetIDLabel_ = iC.consumes<reco::JetIDValueMap>(
           jetID.getParameter<edm::InputTag>("label"));
       jetIDSelect_.reset(new StringCutObjectSelector<reco::JetID>(
           jetID.getParameter<std::string>("select")));
     }
     // select is optional; in case it's not found no
     // selection will be applied (only implemented for
     // CaloJets at the moment)
     if (jetExtras.existsAs<std::string>("select")) {
 
       jetSelect_ = jetExtras.getParameter<std::string>("select");
       jetSelect_ = vcfg[2].getParameter<std::string>("select");
     }
 
     // jetBDiscriminators are optional; in case they are
     // not found the InputTag will remain empty; they
     // consist of pairs of edm::JetFlavorAssociation's &
     // corresponding working points
     includeBTag_ = jetExtras.existsAs<edm::ParameterSet>("jetBTaggers");
     if (includeBTag_) {
  
       edm::ParameterSet btagCombVtx =
           jetExtras.getParameter<edm::ParameterSet>("jetBTaggers")
               .getParameter<edm::ParameterSet>("combinedSecondaryVertex");
       btagCombVtx_ = iC.consumes<reco::JetTagCollection>(
           btagCombVtx.getParameter<edm::InputTag>("label"));
       btagCombVtxWP_ = btagCombVtx.getParameter<double>("workingPoint");
     }
   }
 
   // triggerExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("triggerExtras")) {
     edm::ParameterSet triggerExtras =
         cfg.getParameter<edm::ParameterSet>("triggerExtras");
     triggerTable_ = iC.consumes<edm::TriggerResults>(
         triggerExtras.getParameter<edm::InputTag>("src"));
     triggerPaths_ =
         triggerExtras.getParameter<std::vector<std::string>>("paths");
   }
 
   // massExtras is optional; in case it's not found no mass
   // window cuts are applied for the same flavor monitor
   // histograms
   if (cfg.existsAs<edm::ParameterSet>("massExtras")) {
     edm::ParameterSet massExtras =
         cfg.getParameter<edm::ParameterSet>("massExtras");
     lowerEdge_ = massExtras.getParameter<double>("lowerEdge");
     upperEdge_ = massExtras.getParameter<double>("upperEdge");
   }
 
   // setup the verbosity level for booking histograms;
   // per default the verbosity level will be set to
   // STANDARD. This will also be the chosen level in
   // the case when the monitoring PSet is not found
   verbosity_ = STANDARD;
   if (cfg.existsAs<edm::ParameterSet>("monitoring")) {
     edm::ParameterSet monitoring =
         cfg.getParameter<edm::ParameterSet>("monitoring");
     if (monitoring.getParameter<std::string>("verbosity") == "DEBUG")
       verbosity_ = DEBUG;
     if (monitoring.getParameter<std::string>("verbosity") == "VERBOSE")
       verbosity_ = VERBOSE;
     if (monitoring.getParameter<std::string>("verbosity") == "STANDARD")
       verbosity_ = STANDARD;
   }
   // and don't forget to do the histogram booking
   directory_ = cfg.getParameter<std::string>("directory");
 
 
   muonSelect.reset(new StringCutObjectSelector<reco::PFCandidate, true>(muonSelect_)); 
   muonIso.reset(new StringCutObjectSelector<reco::PFCandidate, true>(muonIso_)); 
   
 
   
   elecSelect.reset(new StringCutObjectSelector<reco::PFCandidate, true>(elecSelect_)); 
   elecIso.reset(new StringCutObjectSelector<reco::PFCandidate, true>(elecIso_)); 
 
 }

SingleTopTChannelLepton::MonitorEnsemble::~MonitorEnsemble ( )

inline

default destructor

Definition at line 68 of file SingleTopTChannelLeptonDQM.h.

References book(), fill(), and GeneralSetup::setup().

68 {}

Member Function Documentation

void MonitorEnsemble::book ( DQMStore::IBooker & ibooker )

book histograms in subdirectory directory

Definition at line 201 of file SingleTopTChannelLeptonDQM.cc.

References DQMStore::IBooker::book1D(), DQMStore::IBooker::book2D(), directory_, hists_, label_, DQMStore::IBooker::setCurrentFolder(), STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, triggerBinLabels(), triggerPaths_, VERBOSE, and verbosity_.

Referenced by ~MonitorEnsemble().

                                                     {
   // set up the current directory path
   std::string current(directory_);
   current += label_;
   ibooker.setCurrentFolder(current);
 
   // determine number of bins for trigger monitoring
   unsigned int nPaths = triggerPaths_.size();
 
   // --- [STANDARD] --- //
   // number of selected primary vertices
   hists_["pvMult_"] = ibooker.book1D("PvMult", "N_{pvs}", 100, 0., 100.);
   // pt of the leading muon
   hists_["muonPt_"] = ibooker.book1D("MuonPt", "pt(#mu)", 50, 0., 250.);
   // muon multiplicity before std isolation
   hists_["muonMult_"] = ibooker.book1D("MuonMult", "N_{20}(#mu)", 10, 0., 10.);
   // muon multiplicity after  std isolation
   hists_["muonMultIso_"] = ibooker.book1D("MuonMultIso", "N_{Iso}(#mu)", 10, 0., 10.);
   // pt of the leading electron
   hists_["elecPt_"] = ibooker.book1D("ElecPt", "pt(e)", 50, 0., 250.);
   // electron multiplicity before std isolation
   hists_["elecMult_"] = ibooker.book1D("ElecMult", "N_{30}(e)", 10, 0., 10.);
   // electron multiplicity after  std isolation
   hists_["elecMultIso_"] = ibooker.book1D("ElecMultIso", "N_{Iso}(e)", 10, 0., 10.);
   // multiplicity of jets with pt>20 (corrected to L2+L3)
   hists_["jetMult_"] = ibooker.book1D("JetMult", "N_{30}(jet)", 10, 0., 10.);
   // trigger efficiency estimates for single lepton triggers
   hists_["triggerEff_"] = ibooker.book1D("TriggerEff",
       "Eff(trigger)", nPaths, 0., nPaths);
   // monitored trigger occupancy for single lepton triggers
   hists_["triggerMon_"] = ibooker.book1D("TriggerMon",
       "Mon(trigger)", nPaths, 0., nPaths);
   // MET (calo)
   hists_["metCalo_"] = ibooker.book1D("METCalo", "MET_{Calo}", 50, 0., 200.);
   // W mass estimate
   hists_["massW_"] = ibooker.book1D("MassW", "M(W)", 60, 0., 300.);
   // Top mass estimate
   hists_["massTop_"] = ibooker.book1D("MassTop", "M(Top)", 50, 0., 500.);
   // W mass transverse estimate mu
   hists_["MTWm_"] = ibooker.book1D("MTWm", "M_{T}^{W}(#mu)", 60, 0., 300.);
   // Top mass transverse estimate mu
   hists_["mMTT_"] = ibooker.book1D("mMTT", "M_{T}^{t}(#mu)", 50, 0., 500.);
 
   // W mass transverse estimate e
   hists_["MTWe_"] = ibooker.book1D("MTWe", "M_{T}^{W}(e)", 60, 0., 300.);
   // Top mass transverse estimate e
   hists_["eMTT_"] = ibooker.book1D("eMTT", "M_{T}^{t}(e)", 50, 0., 500.);
 
   // set bin labels for trigger monitoring
   triggerBinLabels(std::string("trigger"), triggerPaths_);
 
   if (verbosity_ == STANDARD) return;
 
   // --- [VERBOSE] --- //
 
   // eta of the leading muon
   hists_["muonEta_"] = ibooker.book1D("MuonEta", "#eta(#mu)", 30, -3., 3.);
   // std isolation variable of the leading muon
   hists_["muonPFRelIso_"] = ibooker.book1D("MuonPFRelIso",
       "PFIso_{Rel}(#mu)", 50, 0., 1.);
   hists_["muonRelIso_"] = ibooker.book1D("MuonRelIso", "Iso_{Rel}(#mu)", 50, 0., 1.);
 
   // eta of the leading electron
   hists_["elecEta_"] = ibooker.book1D("ElecEta", "#eta(e)", 30, -3., 3.);
   // std isolation variable of the leading electron
   hists_["elecRelIso_"] = ibooker.book1D("ElecRelIso", "Iso_{Rel}(e)", 50, 0., 1.);
   hists_["elecPFRelIso_"] = ibooker.book1D("ElecPFRelIso",
       "PFIso_{Rel}(e)", 50, 0., 1.);
 
   // multiplicity of btagged jets (for track counting high efficiency) with
   // pt(L2L3)>30
  // hists_["jetMultBEff_"] = ibooker.book1D("JetMultBEff",
     //  "N_{30}(b/eff)", 10, 0., 10.);
   // btag discriminator for track counting high efficiency for jets with
   // pt(L2L3)>30
  // hists_["jetBDiscEff_"] = ibooker.book1D("JetBDiscEff",
   //    "Disc_{b/eff}(jet)", 100, 0., 10.);
 
   // eta of the 1. leading jet
   hists_["jet1Eta_"] = ibooker.book1D("Jet1Eta", "#eta (jet1)", 50, -5., 5.);
   // eta of the 2. leading jet
   hists_["jet2Eta_"] = ibooker.book1D("Jet2Eta", "#eta (jet2)", 50, -5., 5.);
 
   // pt of the 1. leading jet (corrected to L2+L3)
   hists_["jet1Pt_"] = ibooker.book1D("Jet1Pt", "pt_{L2L3}(jet1)", 60, 0., 300.);
   // pt of the 2. leading jet (corrected to L2+L3)
   hists_["jet2Pt_"] = ibooker.book1D("Jet2Pt", "pt_{L2L3}(jet2)", 60, 0., 300.);
 
   // eta and pt of the b-tagged jet (filled only when nJets==2)
   hists_["TaggedJetEta_"] = ibooker.book1D("TaggedJetEta",
       "#eta (Tagged jet)", 50, -5., 5.);
   hists_["TaggedJetPt_"] = ibooker.book1D("TaggedJetPt",
       "pt_{L2L3}(Tagged jet)", 60, 0., 300.);
 
   // eta and pt of the jet not passing b-tag (filled only when nJets==2)
   hists_["UnTaggedJetEta_"] = ibooker.book1D("UnTaggedJetEta",
       "#eta (UnTagged jet)", 50, -5., 5.);
   hists_["UnTaggedJetPt_"] = ibooker.book1D("UnTaggedJetPt",
       "pt_{L2L3}(UnTagged jet)", 60, 0., 300.);
 
   // eta and pt of the most forward jet in the event with nJets==2
   hists_["FwdJetEta_"] = ibooker.book1D("FwdJetEta", "#eta (Fwd jet)", 50, -5., 5.);
   hists_["FwdJetPt_"] = ibooker.book1D("FwdJetPt",
       "pt_{L2L3}(Fwd jet)", 60, 0., 300.);
 
   // 2D histogram (pt,eta) of the b-tagged jet (filled only when nJets==2)
   hists_["TaggedJetPtEta_"] = ibooker.book2D("TaggedJetPt_Eta",
       "(pt vs #eta)_{L2L3}(Tagged jet)", 60, 0., 300., 50, -5., 5.);
 
   // 2D histogram (pt,eta) of the not-b tagged jet (filled only when nJets==2)
   hists_["UnTaggedJetPtEta_"] = ibooker.book2D("UnTaggedJetPt_Eta",
     "(pt vs #eta)_{L2L3}(UnTagged jet)", 60, 0., 300., 50, -5., 5.);
 
   // MET (tc)
   hists_["metTC_"] = ibooker.book1D("METTC", "MET_{TC}", 50, 0., 200.);
   // MET (pflow)
   hists_["metPflow_"] = ibooker.book1D("METPflow", "MET_{Pflow}", 50, 0., 200.);
 
   // dz for muons (to suppress cosmis)
   hists_["muonDelZ_"] = ibooker.book1D("MuonDelZ", "d_{z}(#mu)", 50, -25., 25.);
   // dxy for muons (to suppress cosmics)
   hists_["muonDelXY_"] = ibooker.book2D("MuonDelXY",
       "d_{xy}(#mu)", 50, -0.1, 0.1, 50, -0.1, 0.1);
 
   // set axes titles for dxy for muons
   hists_["muonDelXY_"]->setAxisTitle("x [cm]", 1);
   hists_["muonDelXY_"]->setAxisTitle("y [cm]", 2);
 
   if (verbosity_ == VERBOSE) return;
 
   // --- [DEBUG] --- //
 
   // relative muon isolation from charged hadrons  for the leading muon
   hists_["muonChHadIso_"] = ibooker.book1D("MuonChHadIso",
       "Iso_{ChHad}(#mu)", 100, 0., 1.);
   // relative muon isolation from neutral hadrons for the leading muon
   hists_["muonNeuHadIso_"] = ibooker.book1D("MuonNeuHadIso",
       "Iso_{NeuHad}(#mu)", 100, 0., 1.);
   // relative muon isolation from photons for the leading muon
   hists_["muonPhIso_"] = ibooker.book1D("MuonPhIso", "Iso_{Ph}(#mu)", 100, 0., 1.);
 
   // relative electron isolation from charged hadrons for the leading electron
   hists_["elecChHadIso_"] = ibooker.book1D("ElecChHadIso",
       "Iso_{ChHad}(e)", 100, 0., 1.);
   // relative electron isolation from neutral hadrons for the leading electron
   hists_["elecNeuHadIso_"] = ibooker.book1D("ElecNeuHadIso",
       "Iso_{NeuHad}(e)", 100, 0., 1.);
   // relative electron isolation from photons for the leading electron
   hists_["elecPhIso_"] = ibooker.book1D("ElecPhIso", "Iso_{Ph}(e)", 100, 0., 1.);
 
 
 
   // multiplicity of btagged jets (for combined secondary vertex) with
   // pt(L2L3)>30
   hists_["jetMultBCombVtx_"] = ibooker.book1D("JetMultBCombVtx",
       "N_{30}(b/CSV)", 10, 0., 10.);
   // btag discriminator for combined secondary vertex
   hists_["jetBDiscCombVtx_"] = ibooker.book1D("JetBDiscCombVtx",
       "Disc_{b/CSV}(Jet)", 60, -1., 2.);
   // btag discriminator for combined secondary vertex for 1. leading jet
   hists_["jet1BDiscCombVtx_"] = ibooker.book1D("Jet1BDiscCombVtx",
       "Disc_{b/CSV}(Jet1)", 60, -1., 2.);
   // btag discriminator for combined secondary vertex for 2. leading jet
   hists_["jet2BDiscCombVtx_"] = ibooker.book1D("Jet2BDiscCombVtx",
       "Disc_{b/CSV}(Jet2)", 60, -1., 2.);
 
   // pt of the 1. leading jet (uncorrected)
   hists_["jet1PtRaw_"] = ibooker.book1D("Jet1PtRaw", "pt_{Raw}(jet1)", 60, 0., 300.);
   // pt of the 2. leading jet (uncorrected)
   hists_["jet2PtRaw_"] = ibooker.book1D("Jet2PtRaw", "pt_{Raw}(jet2)", 60, 0., 300.);
 
   // selected events
   hists_["eventLogger_"] = ibooker.book2D("EventLogger",
       "Logged Events", 9, 0., 9., 10, 0., 10.);
 
   // set axes titles for selected events
   hists_["eventLogger_"]->getTH1()->SetOption("TEXT");
   hists_["eventLogger_"]->setBinLabel(1, "Run", 1);
   hists_["eventLogger_"]->setBinLabel(2, "Block", 1);
   hists_["eventLogger_"]->setBinLabel(3, "Event", 1);
   hists_["eventLogger_"]->setBinLabel(4, "pt_{L2L3}(jet1)", 1);
   hists_["eventLogger_"]->setBinLabel(5, "pt_{L2L3}(jet2)", 1);
   hists_["eventLogger_"]->setBinLabel(6, "pt_{L2L3}(jet3)", 1);
   hists_["eventLogger_"]->setBinLabel(7, "pt_{L2L3}(jet4)", 1);
   hists_["eventLogger_"]->setBinLabel(8, "M_{W}", 1);
   hists_["eventLogger_"]->setBinLabel(9, "M_{Top}", 1);
   hists_["eventLogger_"]->setAxisTitle("logged evts", 2);
   return;
 }

bool SingleTopTChannelLepton::MonitorEnsemble::booked ( const std::string histName ) const

inlineprivate

check if histogram was booked

Definition at line 95 of file SingleTopTChannelLeptonDQM.h.

References hists_.

Referenced by fill().

                                               {
     return hists_.find(histName) != hists_.end();
   };

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

fill monitor histograms with electronId and jetCorrections

Definition at line 391 of file SingleTopTChannelLeptonDQM.cc.

References funct::abs(), btagCombVtx_, btagCombVtxWP_, JetCorrector::correction(), mitigatedMETSequence_cff::corrector, MillePedeFileConverter_cfg::e, eidCutValue_, elecIso, PatTopSelectionAnalyzer_cfi::elecs, elecs_, elecs_gsf_, elecSelect, electronId_, reco::LeafCandidate::eta(), edm::EventAuxiliary::event(), edm::Event::eventAuxiliary(), edm::EventSetup::find(), edm::Event::getByToken(), JetCorrector::getJetCorrector(), hists_, training_settings::idx, includeBTag_, edm::Ref< C, T, F >::isNull(), edm::EDGetTokenT< T >::isUninitialized(), metsig::jet, jetCorrector_, jetIDLabel_, jetIDSelect_, fwrapper::jets, jets_, jetSelect_, jetSelectCalo, jetSelectJet, jetSelectPF, logged_, lowerEdge_, edm::EventAuxiliary::luminosityBlock(), edm::eventsetup::EventSetupRecordKey::makeKey(), Calculate::massTopQuark(), Calculate::massWBoson(), SiStripPI::max, RazorAnalyzer::met, mets_, RPCpg::mu, metsig::muon, muonIso, nano_cff::muons, muons_, muonSelect, EnergyCorrector::pt, reco::LeafCandidate::pt(), MetAnalyzer::pv(), pvs_, pvSelect_, edm::EventAuxiliary::run(), reco::Jet::scaleEnergy(), triggerObjects_cff::sel, Calculate::tmassTopQuark(), Calculate::tmassWBoson(), triggerPaths_, triggerTable_, upperEdge_, and pseudoTop_cfi::wMass.

Referenced by fill(), selectionPath(), and ~MonitorEnsemble().

                                                        {
   // fetch trigger event if configured such
   edm::Handle<edm::TriggerResults> triggerTable;
   if (!triggerTable_.isUninitialized()) {
     if (!event.getByToken(triggerTable_, triggerTable)) return;
   }
 
   /*
     ------------------------------------------------------------
 
     Primary Vertex Monitoring
 
     ------------------------------------------------------------
   */
 
   // fill monitoring plots for primary vertices
   edm::Handle<edm::View<reco::Vertex>> pvs;
   if (!event.getByToken(pvs_, pvs)) return;
   unsigned int pvMult = 0;
   for (edm::View<reco::Vertex>::const_iterator pv = pvs->begin();
        pv != pvs->end(); ++pv) {
     if (!pvSelect_ || (*pvSelect_)(*pv)) pvMult++;
   }
   fill("pvMult_", pvMult);
 
   /*
      ------------------------------------------------------------
 
      Electron Monitoring
 
      ------------------------------------------------------------
   */
 
   // fill monitoring plots for electrons
   edm::Handle<edm::View<reco::GsfElectron>> elecs_gsf;
   edm::Handle<edm::View<reco::PFCandidate>> elecs;
   edm::View<reco::PFCandidate>::const_iterator elec_it;
 
   reco::GsfElectronRef elec;
 
   if (!event.getByToken(elecs_, elecs)) return;
 
   if (!event.getByToken(elecs_gsf_, elecs_gsf)) return;
 
   // check availability of electron id
   edm::Handle<edm::ValueMap<float>> electronId;
   if (!electronId_.isUninitialized()) {
     if (!event.getByToken(electronId_, electronId)) {
       return;
     }
   }
   // loop electron collection
   unsigned int eMult = 0, eMultIso = 0;
   std::vector<const reco::GsfElectron*> isoElecs;
   reco::GsfElectron e;
 
   unsigned int idx_gsf = 0;
   for (elec_it = elecs->begin(); elec_it != elecs->end(); ++elec_it) {
     if (elec_it->gsfElectronRef().isNull()) continue;
 
     reco::GsfElectronRef elec = elec_it->gsfElectronRef();
     if (elec->gsfTrack().isNull()) continue;
 
     // restrict to electrons with good electronId
     if (electronId_.isUninitialized() ? true : ((double)(*electronId)[elec] >=
                                                 eidCutValue_)) {
       if ((*elecSelect)(*elec_it)) {
         double isolationRel =
             (elec->dr03TkSumPt() + elec->dr03EcalRecHitSumEt() +
              elec->dr03HcalTowerSumEt()) /
             elec->pt();
 
         double isolationChHad =
             elec->pt() /
             (elec->pt() + elec->pfIsolationVariables().sumChargedHadronPt);
         double isolationNeuHad =
             elec->pt() /
             (elec->pt() + elec->pfIsolationVariables().sumNeutralHadronEt);
         double isolationPhoton =
             elec->pt() /
             (elec->pt() + elec->pfIsolationVariables().sumPhotonEt);
         double el_ChHadIso = elec->pfIsolationVariables().sumChargedHadronPt;
         double el_NeHadIso = elec->pfIsolationVariables().sumNeutralHadronEt;
         double el_PhIso = elec->pfIsolationVariables().sumPhotonEt;
         double PFisolationRel =
             (el_ChHadIso +
              max(0., el_NeHadIso + el_PhIso -
                          0.5 * elec->pfIsolationVariables().sumPUPt)) /
             elec->pt();
 
         if (eMult == 0) {
           // restrict to the leading electron
           fill("elecPt_", elec->pt());
           fill("elecEta_", elec->eta());
           fill("elecRelIso_", isolationRel);
           fill("elecPFRelIso_", PFisolationRel);
           fill("elecChHadIso_", isolationChHad);
           fill("elecNeuHadIso_", isolationNeuHad);
           fill("elecPhIso_", isolationPhoton);
         }
         // in addition to the multiplicity counter buffer the iso
         // electron candidates for later overlap check with jets
         ++eMult;
         if ((*elecIso)(*elec_it)) {
           if (eMultIso == 0) e = *elec;
           isoElecs.push_back(&(*elec));
           ++eMultIso;
         }
       }
     }
     idx_gsf++;
   }
 
   fill("elecMult_", eMult);
   fill("elecMultIso_", eMultIso);
 
   /*
      ------------------------------------------------------------
 
      Muon Monitoring
 
      ------------------------------------------------------------
   */
 
   // fill monitoring plots for muons
   unsigned int mMult = 0, mMultIso = 0;
 
   edm::Handle<edm::View<reco::PFCandidate>> muons;
   edm::View<reco::PFCandidate>::const_iterator muonit;
   reco::MuonRef muon;
   reco::Muon mu;
 
   if (!event.getByToken(muons_, muons)) return;
   for (muonit = muons->begin(); muonit != muons->end();
        ++muonit) {  // for now, to use Reco::Muon need to substitute  muonit
                     // with muon
                     // and comment the MuonRef and PFCandidate parts
 
     if (muonit->muonRef().isNull()) continue;
     reco::MuonRef muon = muonit->muonRef();
 
     if (muon->innerTrack().isNull()) continue;
 
     // restrict to globalMuons
     if (muon->isGlobalMuon()) {
       fill("muonDelZ_", muon->globalTrack()->vz());
       fill("muonDelXY_", muon->globalTrack()->vx(), muon->globalTrack()->vy());
 
       // apply selection
       if ((*muonSelect)(*muonit)) {
 
         double isolationRel =
             (muon->isolationR03().sumPt + muon->isolationR03().emEt +
              muon->isolationR03().hadEt) /
             muon->pt();
         double isolationChHad =
             muon->pt() /
             (muon->pt() + muon->pfIsolationR04().sumChargedHadronPt);
         double isolationNeuHad =
             muon->pt() /
             (muon->pt() + muon->pfIsolationR04().sumNeutralHadronEt);
         double isolationPhoton =
             muon->pt() / (muon->pt() + muon->pfIsolationR04().sumPhotonEt);
         double PFisolationRel = (muon->pfIsolationR04().sumChargedHadronPt +
                                  muon->pfIsolationR04().sumNeutralHadronEt +
                                  muon->pfIsolationR04().sumPhotonEt) /
                                 muon->pt();
 
         if (mMult == 0) {
           // restrict to leading muon
           fill("muonPt_", muon->pt());
           fill("muonEta_", muon->eta());
           fill("muonRelIso_", isolationRel);
           fill("muonChHadIso_", isolationChHad);
           fill("muonNeuHadIso_", isolationNeuHad);
           fill("muonPhIso_", isolationPhoton);
           fill("muonPFRelIso_", PFisolationRel);
         }
         ++mMult;
 
         if ((*muonIso)(*muonit)) {
           if (mMultIso == 0) mu = *muon;
           ++mMultIso;
         }
       }
     }
   }
   fill("muonMult_", mMult);
   fill("muonMultIso_", mMultIso);
 
   /*
      ------------------------------------------------------------
 
      Jet Monitoring
 
      ------------------------------------------------------------
   */
   // check availability of the btaggers
   edm::Handle<reco::JetTagCollection> btagCombVtx;
   if (includeBTag_) {
 
     if (!event.getByToken(btagCombVtx_, btagCombVtx)) return;
   }
 
   // load jet corrector if configured such
   const JetCorrector* corrector = nullptr;
   if (!jetCorrector_.empty()) {
     // check whether a jet correcto is in the event setup or not
     if (setup.find(edm::eventsetup::EventSetupRecordKey::makeKey<
             JetCorrectionsRecord>())) {
       corrector = JetCorrector::getJetCorrector(jetCorrector_, setup);
     } else {
       edm::LogVerbatim("SingleTopTChannelLeptonDQM")
           << "\n"
           << "-----------------------------------------------------------------"
              "-------------------- \n"
           << " No JetCorrectionsRecord available from EventSetup:\n"
           << "  - Jets will not be corrected.\n"
           << "  - If you want to change this add the following lines to your "
              "cfg file:\n"
           << "\n"
           << "  ## load jet corrections\n"
           << "  "
              "process.load(\"JetMETCorrections.Configuration."
              "JetCorrectionServicesAllAlgos_cff\") \n"
           << "  process.prefer(\"ak5CaloL2L3\")\n"
           << "\n"
           << "-----------------------------------------------------------------"
              "-------------------- \n";
     }
   }
 
   // loop jet collection
   std::vector<reco::Jet> correctedJets;
   unsigned int mult = 0, 
                multBCombVtx = 0,multNoBCombVtx = 0;
 
   edm::Handle<edm::View<reco::Jet>> jets;
   if (!event.getByToken(jets_, jets)) return;
 
   edm::Handle<reco::JetIDValueMap> jetID;
   if (jetIDSelect_) {
     if (!event.getByToken(jetIDLabel_, jetID)) return;
   }
 
   vector<double> bJetDiscVal;
   vector<double> NobJetDiscVal;
   reco::Jet TaggedJetCand;
   reco::Jet UnTaggedJetCand;
   reco::Jet FwdJetCand;
   for (edm::View<reco::Jet>::const_iterator jet = jets->begin();
        jet != jets->end(); ++jet) {
     // check jetID for calo jets
     unsigned int idx = jet - jets->begin();
     if (dynamic_cast<const reco::CaloJet*>(&*jet)) {
       if (jetIDSelect_ &&
           dynamic_cast<const reco::CaloJet*>(jets->refAt(idx).get())) {
         if (!(*jetIDSelect_)((*jetID)[jets->refAt(idx)])) continue;
       }
     }
 
     // check additional jet selection for calo, pf and bare reco jets
     if (dynamic_cast<const reco::CaloJet*>(&*jet)) {
       reco::CaloJet sel = dynamic_cast<const reco::CaloJet&>(*jet);
       sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       if ( jetSelectCalo==nullptr)
     jetSelectCalo.reset(new StringCutObjectSelector<reco::CaloJet>(jetSelect_));
       if (!((*jetSelectCalo)(sel))) {
         continue;
       }
     } else if (dynamic_cast<const reco::PFJet*>(&*jet)) {
       reco::PFJet sel = dynamic_cast<const reco::PFJet&>(*jet);
       sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       if ( jetSelectPF==nullptr)
     jetSelectPF.reset(new StringCutObjectSelector<reco::PFJet>(jetSelect_));
       if (!((*jetSelectPF)(sel))) continue;
     } else {
       reco::Jet sel = *jet;
       sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       if ( jetSelectJet==nullptr)
     jetSelectJet.reset(new StringCutObjectSelector<reco::Jet>(jetSelect_));
 
       if (!((*jetSelectJet)(sel))) continue;
     }
 
 
     // prepare jet to fill monitor histograms
     reco::Jet monitorJet = *jet;
     monitorJet.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
     correctedJets.push_back(monitorJet);
 
     ++mult;  // determine jet multiplicity
     if (includeBTag_) {
       // fill b-discriminators
       edm::RefToBase<reco::Jet> jetRef = jets->refAt(idx);
       if ((*btagCombVtx)[jetRef] > btagCombVtxWP_){
 
        if (multBCombVtx == 0) {
           TaggedJetCand = monitorJet;
           // TaggedJetCand = *jet;
           bJetDiscVal.push_back((*btagCombVtx)[jetRef]);
 
         } else if (multBCombVtx == 1) {
           bJetDiscVal.push_back((*btagCombVtx)[jetRef]);
           if (bJetDiscVal[1] > bJetDiscVal[0]) TaggedJetCand = monitorJet;
           // TaggedJetCand = *jet;
         }
         ++multBCombVtx;
       } else {
         if (multNoBCombVtx == 0) {
           UnTaggedJetCand = monitorJet;
           NobJetDiscVal.push_back((*btagCombVtx)[jetRef]);
 
         } else if (multNoBCombVtx == 1) {
           NobJetDiscVal.push_back((*btagCombVtx)[jetRef]);
           if (NobJetDiscVal[1] < NobJetDiscVal[0]) UnTaggedJetCand = monitorJet;
         }
 
         ++multNoBCombVtx;
       }
 
 
 
 
       if (mult == 1) {
         fill("jet1BDiscCombVtx_", (*btagCombVtx)[jetRef]);
       } else if (mult == 2) {
         fill("jet2BDiscCombVtx_", (*btagCombVtx)[jetRef]);
       }
 
       fill("jetBDiscCombVtx_", (*btagCombVtx)[jetRef]);
     }
     // fill pt (raw or L2L3) for the leading jets
     if (mult == 1) {
       fill("jet1Pt_", monitorJet.pt());
       fill("jet1Eta_", monitorJet.eta());
       fill("jet1PtRaw_", jet->pt());
       FwdJetCand = monitorJet;
     }
 
     if (mult == 2) {
       fill("jet2Pt_", monitorJet.pt());
       fill("jet2Eta_", monitorJet.eta());
       fill("jet2PtRaw_", jet->pt());
 
       if (abs(monitorJet.eta()) > abs(FwdJetCand.eta())) {
         FwdJetCand = monitorJet;
       }
 
       fill("FwdJetPt_", FwdJetCand.pt());
       fill("FwdJetEta_", FwdJetCand.eta());
     }
   }
 
   if (multNoBCombVtx == 1 && multBCombVtx == 1) {
 
     fill("TaggedJetPtEta_", TaggedJetCand.pt(), TaggedJetCand.eta());
     fill("UnTaggedJetPtEta_", UnTaggedJetCand.pt(), UnTaggedJetCand.eta());
 
     fill("TaggedJetPt_", TaggedJetCand.pt());
     fill("TaggedJetEta_", TaggedJetCand.eta());
     fill("UnTaggedJetPt_", UnTaggedJetCand.pt());
     fill("UnTaggedJetEta_", UnTaggedJetCand.eta());
   }
 
   fill("jetMult_", mult);
   fill("jetMultBCombVtx_", multBCombVtx);
 
   /*
   ------------------------------------------------------------
 
   MET Monitoring
 
   ------------------------------------------------------------
   */
 
   // fill monitoring histograms for met
   reco::MET mET;
   for (std::vector<edm::EDGetTokenT<edm::View<reco::MET>>>::const_iterator
            met_ = mets_.begin();
        met_ != mets_.end(); ++met_) {
     edm::Handle<edm::View<reco::MET>> met;
     if (!event.getByToken(*met_, met)) continue;
     if (met->begin() != met->end()) {
       unsigned int idx = met_ - mets_.begin();
       if (idx == 0) {
         fill("metCalo_", met->begin()->et());
       }
       if (idx == 1) {
         fill("metTC_", met->begin()->et());
       }
       if (idx == 2) {
         fill("metPflow_", met->begin()->et());
         mET = *(met->begin());
       }
     }
   }
 
   /*
      ------------------------------------------------------------
 
      Event Monitoring
 
      ------------------------------------------------------------
   */
 
   // fill W boson and top mass estimates
   Calculate eventKinematics(MAXJETS, WMASS);
   double wMass = eventKinematics.massWBoson(correctedJets);
   double topMass = eventKinematics.massTopQuark(correctedJets);
   if (wMass >= 0 && topMass >= 0) {
     fill("massW_", wMass);
     fill("massTop_", topMass);
   }
   // fill plots for trigger monitoring
   if ((lowerEdge_ == -1. && upperEdge_ == -1.) ||
       (lowerEdge_ < wMass && wMass < upperEdge_)) {
     if (!triggerTable_.isUninitialized())
       fill(event, *triggerTable, "trigger", triggerPaths_);
     if (logged_ <= hists_.find("eventLogger_")->second->getNbinsY()) {
       // log runnumber, lumi block, event number & some
       // more pysics infomation for interesting events
       fill("eventLogger_", 0.5, logged_ + 0.5, event.eventAuxiliary().run());
       fill("eventLogger_", 1.5, logged_ + 0.5,
            event.eventAuxiliary().luminosityBlock());
       fill("eventLogger_", 2.5, logged_ + 0.5, event.eventAuxiliary().event());
       if (!correctedJets.empty())
         fill("eventLogger_", 3.5, logged_ + 0.5, correctedJets[0].pt());
       if (correctedJets.size() > 1)
         fill("eventLogger_", 4.5, logged_ + 0.5, correctedJets[1].pt());
       if (correctedJets.size() > 2)
         fill("eventLogger_", 5.5, logged_ + 0.5, correctedJets[2].pt());
       if (correctedJets.size() > 3)
         fill("eventLogger_", 6.5, logged_ + 0.5, correctedJets[3].pt());
       fill("eventLogger_", 7.5, logged_ + 0.5, wMass);
       fill("eventLogger_", 8.5, logged_ + 0.5, topMass);
       ++logged_;
     }
   }
   if (multBCombVtx != 0 && mMultIso == 1) {
 
     double mtW = eventKinematics.tmassWBoson(&mu, mET, TaggedJetCand);
     fill("MTWm_", mtW);
     double MTT = eventKinematics.tmassTopQuark(&mu, mET, TaggedJetCand);
     fill("mMTT_", MTT);
   }
 
   if (multBCombVtx != 0 && eMultIso == 1) {
     double mtW = eventKinematics.tmassWBoson(&e, mET, TaggedJetCand);
     fill("MTWe_", mtW);
     double MTT = eventKinematics.tmassTopQuark(&e, mET, TaggedJetCand);
     fill("eMTT_", MTT);
   }
 }

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::TriggerResults &	triggerTable,
		std::string	channel,
		const std::vector< std::string >	labels
	)		const

inlineprivate

fill trigger monitoring histograms

Definition at line 230 of file SingleTopTChannelLeptonDQM.h.

References accept(), fill(), hists_, training_settings::idx, monitorPath(), and selectionPath().

                                                                            {
   for (unsigned int idx = 0; idx < labels.size(); ++idx) {
     if (accept(event, triggerTable, monitorPath(labels[idx]))) {
       fill(channel + "Mon_", idx + 0.5);
       // take care to fill triggerMon_ before evts is being called
       int evts = hists_.find(channel + "Mon_")
                      ->second->getBinContent(idx + 1);
       double value = hists_.find(channel + "Eff_")
                          ->second->getBinContent(idx + 1);
       fill(
           channel + "Eff_", idx + 0.5,
           1. / evts * (accept(event, triggerTable, selectionPath(labels[idx])) -
                        value));
     }
   }
 }

void SingleTopTChannelLepton::MonitorEnsemble::fill	(	const std::string	histName,
		double	value
	)		const

inlineprivate

fill histogram if it had been booked before

Definition at line 99 of file SingleTopTChannelLeptonDQM.h.

References booked(), and hists_.

                                                           {
     if (booked(histName))
       hists_.find(histName)->second->Fill(value);
   };

void SingleTopTChannelLepton::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 104 of file SingleTopTChannelLeptonDQM.h.

References booked(), and hists_.

                                                                           {
     if (booked(histName))
       hists_.find(histName)->second->Fill(xValue, yValue);
   };

void SingleTopTChannelLepton::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue,
		double	zValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 109 of file SingleTopTChannelLeptonDQM.h.

References booked(), and hists_.

                                  {
     if (booked(histName))
       hists_.find(histName)->second->Fill(xValue, yValue, zValue);
   };

std::string SingleTopTChannelLepton::MonitorEnsemble::monitorPath ( const std::string & label ) const

inlineprivate

deduce monitorPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 78 of file SingleTopTChannelLeptonDQM.h.

Referenced by fill(), and triggerBinLabels().

                                                       {
     return label.substr(label.find(':') + 1);
   };

std::string SingleTopTChannelLepton::MonitorEnsemble::selectionPath ( const std::string & label ) const

inlineprivate

deduce selectionPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 83 of file SingleTopTChannelLeptonDQM.h.

References fill(), tablePrinter::labels, AlCaHLTBitMon_QueryRunRegistry::string, and triggerBinLabels().

Referenced by fill(), and triggerBinLabels().

                                                         {
     return label.substr(0, label.find(':'));
   };

void MonitorEnsemble::triggerBinLabels	(	std::string	channel,
		const std::vector< std::string >	labels
	)

inlineprivate

set configurable labels for trigger monitoring histograms

Definition at line 218 of file SingleTopTChannelLeptonDQM.h.

References hists_, training_settings::idx, monitorPath(), and selectionPath().

Referenced by book(), and selectionPath().

                                                           {
   for (unsigned int idx = 0; idx < labels.size(); ++idx) {
     hists_[channel + "Mon_"]
         ->setBinLabel(idx + 1, "[" + monitorPath(labels[idx]) + "]", 1);
     hists_[channel + "Eff_"]
         ->setBinLabel(idx + 1, "[" + selectionPath(labels[idx]) + "]|[" +
                                    monitorPath(labels[idx]) + "]",
                       1);
   }
 }

Member Data Documentation

edm::EDGetTokenT<reco::JetTagCollection> SingleTopTChannelLepton::MonitorEnsemble::btagCombVtx_

private

Definition at line 188 of file SingleTopTChannelLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

double SingleTopTChannelLepton::MonitorEnsemble::btagCombVtxWP_

private

Definition at line 192 of file SingleTopTChannelLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

edm::EDGetTokenT<reco::JetTagCollection> SingleTopTChannelLepton::MonitorEnsemble::btagEff_

private

btag discriminator labels

Definition at line 188 of file SingleTopTChannelLeptonDQM.h.

double SingleTopTChannelLepton::MonitorEnsemble::btagEffWP_

private

btag working points

Definition at line 192 of file SingleTopTChannelLeptonDQM.h.

edm::EDGetTokenT<reco::JetTagCollection> SingleTopTChannelLepton::MonitorEnsemble::btagPur_

private

Definition at line 188 of file SingleTopTChannelLeptonDQM.h.

double SingleTopTChannelLepton::MonitorEnsemble::btagPurWP_

private

Definition at line 192 of file SingleTopTChannelLeptonDQM.h.

edm::EDGetTokenT<reco::JetTagCollection> SingleTopTChannelLepton::MonitorEnsemble::btagVtx_

private

Definition at line 188 of file SingleTopTChannelLeptonDQM.h.

double SingleTopTChannelLepton::MonitorEnsemble::btagVtxWP_

private

Definition at line 192 of file SingleTopTChannelLeptonDQM.h.

std::string SingleTopTChannelLepton::MonitorEnsemble::directory_

private

Definition at line 203 of file SingleTopTChannelLeptonDQM.h.

Referenced by book(), and MonitorEnsemble().

double SingleTopTChannelLepton::MonitorEnsemble::eidCutValue_

private

electronId pattern we expect the following pattern: 0: fails 1: passes electron ID only 2: passes electron Isolation only 3: passes electron ID and Isolation only 4: passes conversion rejection 5: passes conversion rejection and ID 6: passes conversion rejection and Isolation 7: passes the whole selection As described on https://twiki.cern.ch/twiki/bin/view/CMS/SimpleCutBasedEleID

Definition at line 157 of file SingleTopTChannelLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

std::unique_ptr<StringCutObjectSelector<reco::PFCandidate, true> > SingleTopTChannelLepton::MonitorEnsemble::elecIso

private

Definition at line 213 of file SingleTopTChannelLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

std::string SingleTopTChannelLepton::MonitorEnsemble::elecIso_

private

extra isolation criterion on electron

Definition at line 159 of file SingleTopTChannelLeptonDQM.h.

Referenced by MonitorEnsemble().

edm::EDGetTokenT<edm::View<reco::PFCandidate> > SingleTopTChannelLepton::MonitorEnsemble::elecs_