1 #ifndef Alignment_MillePedeAlignmentAlgorithm_MillePedeAlignmentAlgorithm_h 2 #define Alignment_MillePedeAlignmentAlgorithm_MillePedeAlignmentAlgorithm_h 70 bool addCalibrations(
const std::vector<IntegratedCalibrationBase*> &iCals)
override;
91 bool changed)
override;
120 std::pair<unsigned int, unsigned int>
135 unsigned int iHit, gbl::GblPoint &gblPoint);
141 unsigned int addHitCount(
const std::vector<AlignmentParameters*> &parVec,
142 const std::vector<bool> &validHitVecY)
const;
146 typename ResidualMatrix,
147 typename LocalDerivativeMatrix>
149 unsigned int iTrajHit,
150 Eigen::MatrixBase<CovarianceMatrix>& aHitCovarianceM,
151 Eigen::MatrixBase<ResidualMatrix>& aHitResidualsM,
152 Eigen::MatrixBase<LocalDerivativeMatrix>& aLocalDerivativesM);
156 unsigned int iVirtualMeas);
160 typename ResidualMatrix,
161 typename LocalDerivativeMatrix>
163 unsigned int iVirtualMeas,
164 Eigen::MatrixBase<CovarianceMatrix>& aHitCovarianceM,
165 Eigen::MatrixBase<ResidualMatrix>& aHitResidualsM,
166 Eigen::MatrixBase<LocalDerivativeMatrix>& aLocalDerivativesM);
172 std::vector<float> &globalDerivativesX,
173 std::vector<float> &globalDerivativesY,
174 std::vector<int> &globalLabels,
181 std::vector<double> &globalDerivativesX,
182 std::vector<double> &globalDerivativesY,
183 std::vector<int> &globalLabels,
190 std::vector<float> &globalDerivativesX,
191 std::vector<float> &globalDerivativesY,
192 std::vector<int> &globalLabels)
const;
196 unsigned int iTrajHit,
const std::vector<int> &globalLabels,
197 const std::vector<float> &globalDerivativesX,
198 const std::vector<float> &globalDerivativesY);
202 unsigned int iTrajHit,
const std::vector<int> &globalLabels,
203 const std::vector<float> &globalDerivativesX);
209 unsigned int iTrajHit,
const std::vector<int> &globalLabels,
210 const std::vector<float> &globalDerivativesx,
211 const std::vector<float> &globalDerivativesy);
214 typename LocalDerivativeMatrix,
215 typename ResidualMatrix,
216 typename GlobalDerivativeMatrix>
217 void diagonalize(Eigen::MatrixBase<CovarianceMatrix>& aHitCovarianceM,
218 Eigen::MatrixBase<LocalDerivativeMatrix>& aLocalDerivativesM,
219 Eigen::MatrixBase<ResidualMatrix>& aHitResidualsM,
220 Eigen::MatrixBase<GlobalDerivativeMatrix>& aGlobalDerivativesM)
const;
223 template <
typename GlobalDerivativeMatrix>
225 const std::vector<float> &globalDerivativesy,
226 Eigen::MatrixBase<GlobalDerivativeMatrix>& aGlobalDerivativesM);
237 bool areEmptyParams(
const std::vector<Alignable*> &alignables)
const;
251 const std::vector<TrajectoryStateOnSurface> &tsoses);
267 const std::vector<std::string> &inFiles)
const;
268 bool addHits(
const std::vector<Alignable*> &alis,
269 const std::vector<AlignmentUserVariables*> &mpVars)
const;
bool processesEvents() override
Returns whether MP should process events in the current configuration.
std::vector< int > theIntBuffer
void globalDerivativesCalibration(const TransientTrackingRecHit::ConstRecHitPointer &recHit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo, std::vector< float > &globalDerivativesX, std::vector< float > &globalDerivativesY, std::vector< int > &globalLabels) const
adding derivatives from integrated calibrations
const align::RunNumber firstIOV_
bool supportsCalibrations() override
Returns whether MP supports calibrations.
std::unique_ptr< MillePedeMonitor > theMonitor
bool setParametersForRunRange(const RunRange &runrange) override
const bool enableAlignableUpdates_
virtual void endRun(const EventInfo &, const EndRunInfo &, const edm::EventSetup &)
Run on run products, e.g. TkLAS.
std::shared_ptr< AlignPCLThresholds > theThresholds
void diagonalize(Eigen::MatrixBase< CovarianceMatrix > &aHitCovarianceM, Eigen::MatrixBase< LocalDerivativeMatrix > &aLocalDerivativesM, Eigen::MatrixBase< ResidualMatrix > &aHitResidualsM, Eigen::MatrixBase< GlobalDerivativeMatrix > &aGlobalDerivativesM) const
std::vector< Alignable * > theAlignables
void endLuminosityBlock(const edm::EventSetup &) override
called at end of luminosity block
std::unique_ptr< TrajectoryFactoryBase > theTrajectoryFactory
bool theDoSurveyPixelBarrel
std::vector< RunRange > RunRanges
std::unique_ptr< gbl::MilleBinary > theBinary
int addGlobalData(const edm::EventSetup &setup, const EventInfo &eventInfo, const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iHit, gbl::GblPoint &gblPoint)
unsigned int theMinNumHits
bool globalDerivativesHierarchy(const EventInfo &eventInfo, const TrajectoryStateOnSurface &tsos, Alignable *ali, const AlignableDetOrUnitPtr &alidet, std::vector< float > &globalDerivativesX, std::vector< float > &globalDerivativesY, std::vector< int > &globalLabels, AlignmentParameters *&lowestParams) const
recursively adding derivatives and labels, false if problems
def setup(process, global_tag, zero_tesla=False)
std::shared_ptr< PedeLabelerBase > thePedeLabels
std::vector< std::string > getExistingFormattedFiles(const std::vector< std::string > &plainFiles, const std::string &theDir)
unsigned int addHitCount(const std::vector< AlignmentParameters * > &parVec, const std::vector< bool > &validHitVecY) const
bool addCalibrations(const std::vector< IntegratedCalibrationBase * > &iCals) override
Pass integrated calibrations to Millepede (they are not owned by Millepede!)
int callMille2D(const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, const std::vector< int > &globalLabels, const std::vector< float > &globalDerivativesx, const std::vector< float > &globalDerivativesy)
math::Error< 5 >::type CovarianceMatrix
Interface/Base class for alignment algorithms, each alignment algorithm has to be derived from this c...
const bool ignoreFirstIOVCheck_
const bool ignoreHitsWithoutGlobalDerivatives_
void addLasBeam(const EventInfo &eventInfo, const TkFittedLasBeam &lasBeam, const std::vector< TrajectoryStateOnSurface > &tsoses)
define event information passed to algorithms
unsigned int doIO(int loop) const
int callMille(const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, const std::vector< int > &globalLabels, const std::vector< float > &globalDerivativesX, const std::vector< float > &globalDerivativesY)
calls callMille1D or callMille2D
void beginLuminosityBlock(const edm::EventSetup &) override
called at begin of luminosity block (resets Mille binary in mille mode)
std::vector< align::RunNumber > cachedRuns_
int callMille1D(const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, const std::vector< int > &globalLabels, const std::vector< float > &globalDerivativesX)
calls Mille for 1D hits
void addLaserData(const EventInfo &eventInfo, const TkFittedLasBeamCollection &tkLasBeams, const TsosVectorCollection &tkLasBeamTsoses)
int addMeasurementData(const edm::EventSetup &setup, const EventInfo &eventInfo, const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iHit, AlignmentParameters *¶ms)
bool isMode(unsigned int testMode) const
void beginRun(const edm::Run &run, const edm::EventSetup &setup, bool changed) override
called at begin of run
void makeGlobDerivMatrix(const std::vector< float > &globalDerivativesx, const std::vector< float > &globalDerivativesy, Eigen::MatrixBase< GlobalDerivativeMatrix > &aGlobalDerivativesM)
std::shared_ptr< TrackingRecHit const > ConstRecHitPointer
AlignmentParameterStore * theAlignmentParameterStore
directory for all kind of files
bool is2D(const TransientTrackingRecHit::ConstRecHitPointer &recHit) const
true if hit belongs to 2D detector (currently tracker specific)
edm::ParameterSet theConfig
void addRefTrackVirtualMeas1D(const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iVirtualMeas, Eigen::MatrixBase< CovarianceMatrix > &aHitCovarianceM, Eigen::MatrixBase< ResidualMatrix > &aHitResidualsM, Eigen::MatrixBase< LocalDerivativeMatrix > &aLocalDerivativesM)
adds data for a specific virtual measurement from reference trajectory
void addRefTrackData2D(const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, Eigen::MatrixBase< CovarianceMatrix > &aHitCovarianceM, Eigen::MatrixBase< ResidualMatrix > &aHitResidualsM, Eigen::MatrixBase< LocalDerivativeMatrix > &aLocalDerivativesM)
adds data from reference trajectory from a specific Hit
(Abstract) Base class for alignment algorithm user variables
std::unique_ptr< PedeSteerer > thePedeSteer
bool areIOVsSpecified() const
bool storeAlignments() override
Returns whether MP produced results to be stored.
void terminate() override
Called at end of job.
const bool skipGlobalPositionRcdCheck_
void initialize(const edm::EventSetup &setup, AlignableTracker *tracker, AlignableMuon *muon, AlignableExtras *extras, AlignmentParameterStore *store) override
Called at beginning of job.
bool addHits(const std::vector< Alignable * > &alis, const std::vector< AlignmentUserVariables * > &mpVars) const
bool addHitStatistics(int fromLoop, const std::string &outFile, const std::vector< std::string > &inFiles) const
bool areEmptyParams(const std::vector< Alignable * > &alignables) const
void addVirtualMeas(const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iVirtualMeas)
adds data for virtual measurements from reference trajectory
bool readFromPede(const edm::ParameterSet &mprespset, bool setUserVars, const RunRange &runrange)
read pede input defined by 'psetName', flag to create/not create MillePedeVariables ...
std::pair< unsigned int, unsigned int > addReferenceTrajectory(const edm::EventSetup &setup, const EventInfo &eventInfo, const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr)
fill mille for a trajectory, returning number of x/y hits ([0,0] if 'bad' trajectory) ...
virtual bool storeThresholds(const int &nRecords, const AlignPCLThresholds::threshold_map &thresholdMap)
std::vector< IntegratedCalibrationBase * > theCalibrations
std::vector< float > theFloatBufferX
std::map< std::string, AlignPCLThreshold > threshold_map
void run(const edm::EventSetup &setup, const EventInfo &eventInfo) override
Run the algorithm on trajectories and tracks.
void buildUserVariables(const std::vector< Alignable * > &alignables) const
add MillePedeVariables for each AlignmentParameters (exception if no parameters...)
align::RunNumber lastProcessedRun_
MillePedeAlignmentAlgorithm(const edm::ParameterSet &cfg)
Constructor.
const bool enforceSingleIOVInput_
~MillePedeAlignmentAlgorithm() override
Destructor.
std::vector< TkFittedLasBeam > TkFittedLasBeamCollection
std::vector< float > theFloatBufferY
#define DEFINE_EDM_PLUGIN(factory, type, name)
eventInfo
add run, event number and lumi section
void addPxbSurvey(const edm::ParameterSet &pxbSurveyCfg)
add measurement data from PXB survey
unsigned int decodeMode(const std::string &mode) const
std::unique_ptr< AlignableNavigator > theAlignableNavigator
const align::RunRanges uniqueRunRanges_
std::vector< std::vector< TrajectoryStateOnSurface > > TsosVectorCollection
define run information passed to algorithms (in endRun)
Constructor of the full muon geometry.
cond::RealTimeType< cond::runnumber >::type RunNumber
std::unique_ptr< Mille > theMille