ZdcHardcodeGeometryLoader.cc

Go to the documentation of this file.

#include "Geometry/CaloGeometry/interface/CaloCellGeometry.h"
#include "Geometry/ForwardGeometry/interface/ZdcHardcodeGeometryLoader.h"
#include "Geometry/ForwardGeometry/interface/IdealZDCTrapezoid.h"
#include "Geometry/ForwardGeometry/interface/ZdcGeometry.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include <algorithm>

typedef CaloCellGeometry::CCGFloat CCGFloat ;

ZdcHardcodeGeometryLoader::ZdcHardcodeGeometryLoader() :
   theTopology ( new ZdcTopology ) ,
   extTopology ( theTopology )
{
  init();
}

ZdcHardcodeGeometryLoader::ZdcHardcodeGeometryLoader(const ZdcTopology& ht) : 
   theTopology( nullptr   ) ,
   extTopology( &ht ) 
{
  init();
}

void ZdcHardcodeGeometryLoader::init() 
{
}

ZdcHardcodeGeometryLoader::ReturnType 
ZdcHardcodeGeometryLoader::load(DetId::Detector /*det*/, int subdet)
{
   ReturnType hg(new ZdcGeometry( extTopology ) );
   if(subdet == HcalZDCDetId::SubdetectorId)
   {
      fill(HcalZDCDetId::EM  ,hg );
      fill(HcalZDCDetId::LUM ,hg );
      fill(HcalZDCDetId::HAD ,hg );
//      fill(HcalZDCDetId::RPD ,hg ); // line will be needed in next version of code, but is commented out for now in order to ensure run1 compatability. 
   }
   return hg;
}

ZdcHardcodeGeometryLoader::ReturnType 
ZdcHardcodeGeometryLoader::load() 
{
   ReturnType hg(new ZdcGeometry( extTopology ) );
   fill(HcalZDCDetId::EM  ,hg );
   fill(HcalZDCDetId::LUM ,hg );
   fill(HcalZDCDetId::HAD ,hg );
//   fill(HcalZDCDetId::RPD ,hg );
   return hg;
}

void ZdcHardcodeGeometryLoader::fill( HcalZDCDetId::Section section, 
                      ReturnType            geom     ) 
{
  // start by making the new HcalDetIds
  std::vector<HcalZDCDetId> zdcIds;
  HcalZDCDetId id;
  int firstCell = extTopology->firstCell(section);
  int lastCell = extTopology->lastCell(section);
  for(int ichannel = firstCell; ichannel <= lastCell; ++ichannel) {
    id = HcalZDCDetId(section, true, ichannel);
    if(extTopology->valid(id)) zdcIds.emplace_back(id);
    id = HcalZDCDetId(section, false, ichannel);
    if(extTopology->valid(id)) zdcIds.emplace_back(id);
   }
  if( geom->cornersMgr() == nullptr ) geom->allocateCorners( HcalZDCDetId::kSizeForDenseIndexing ) ;
  if( geom->parMgr()     == nullptr ) geom->allocatePar( 
     ZdcGeometry::k_NumberOfParametersPerShape*ZdcGeometry::k_NumberOfShapes,
     ZdcGeometry::k_NumberOfParametersPerShape ) ;

  edm::LogInfo("ZdcHardcodeGeometry") << "Number of ZDC DetIds made: " << section << " " << zdcIds.size();
 
  // for each new HcalZdcDetId, make a CaloCellGeometry

 for(std::vector<HcalZDCDetId>::const_iterator zdcIdItr = zdcIds.begin();
     zdcIdItr != zdcIds.end(); ++zdcIdItr)
   {
      makeCell( *zdcIdItr, geom ) ;
   }
}

void
ZdcHardcodeGeometryLoader::makeCell(const HcalZDCDetId& detId,
                    ReturnType          geom) const 
{
   double zside ( detId.zside() ) ;

   const HcalZDCDetId::Section section ( detId.section() ) ;

   const int channel ( detId.channel() ) ;

//********* Here are all the hardcoded numbers you need to know, in **cm**
//********* Most are from the zdc.xml and zdclum.xml files ******

   static const double x0 ( 0 ) ; // these 3 are for the "mother" volume
   static const double y0 ( 0 ) ;
   static const double z0 ( 14000 ) ;

   static const double angEM  ( 0 ) ; // the angles of front face wrt vertical
   static const double angLUM ( 0 ) ;
   static const double angRPD ( 0 ) ;
   static const double angHAD ( atan( 1. ) ) ; // this is 45 deg

   // these dimensions are **half**-sizes

   static const double dxHAD ( 4.8 ) ;
   static const double dxEM  ( dxHAD/5. ) ;
   static const double dxLUM ( 4.8 ) ; // to be updated when known
   static const double dxRPD ( 4.8 ) ; // to be updated when known

   static const double dhEM  ( 6.25 ) ;
   static const double dhLUM ( 6.25 ) ; // to be updated when known
   static const double dhHAD ( 6.25 ) ;
   static const double dhRPD ( 6.25 ) ; // to be updated when known

   static const double dzEM  ( 33.*0.15 ) ;
   static const double dzLUM ( 23.5 ) ; // to be updated when known
   static const double dzHAD ( 0.82*6./cos(angHAD) ) ;
   static const double dzRPD ( 23.5 ) ; // to be updated when known

   // these are not half-dimensions, they are offsets from nominal
   // for the center-of-front-face points

   static const double xOffEM  ( -4.*dxEM ) ; 
   static const double xOffLUM ( 0 ) ; 
   static const double xOffHAD ( 0 ) ; 
   static const double xOffRPD ( 0 ) ; 

   static const double yOffEM  ( 0 ) ; 
   static const double yOffLUM ( 0 ) ; 
   static const double yOffHAD ( 0 ) ; 
   static const double yOffRPD ( 0 ) ; 

   static const double zOffEM  ( -49.85  - 0.15 ) ; 
   static const double zOffLUM ( -39.555        ) ; 
   static const double zOffHAD ( -29.00         ) ; 
   static const double zOffRPD ( -39.555        ) ; 

//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

   double dx, dh, dz, x, y, z, an ;

   if( section==HcalZDCDetId::EM ) {
     dx = dxEM ;
     dh = dhEM ;
     dz = dzEM ;
     an = angEM ;
     x  = zside*( x0 + xOffEM + ( channel - 1.0 )*dxEM*2. ) ;
     y  = y0 + yOffEM ;
     z  = zside*( z0 + zOffEM ) ;
   } else if( section==HcalZDCDetId::LUM ) {
     dx = dxLUM ;
     dh = dhLUM ;
     dz = dzLUM ;
     an = angLUM ;
     x  = zside*( x0 + xOffLUM ) ;
     y  = y0 + yOffLUM ;
     z  = zside*( z0 + zOffLUM + ( channel - 1.0 )*dzLUM*2. ) ;
   } else if( section==HcalZDCDetId::RPD ) {
     dx = dxRPD ;
     dh = dhRPD ;
     dz = dzRPD ;
     an = angRPD ;
     x  = zside*( x0 + xOffRPD ) ;
     y  = y0 + yOffRPD ;
     z  = zside*( z0 + zOffRPD + ( channel - 1.0 )*dzRPD*2. ) ;
   } else {
     assert( section==HcalZDCDetId::HAD ) ;
     dx = dxHAD ;
     dh = dhHAD ;
     dz = dzHAD ;
     an = angHAD ;
     x  = zside*( x0 + xOffHAD ) ;
     y  = y0 + yOffHAD ;
     z  = zside*( z0 + zOffHAD + ( channel - 1.0 )*dzHAD*2. ) ;
   }

   const GlobalPoint fc ( x, y, z );

   const double dy ( dh*cos( an ) ) ;

   std::vector<CCGFloat> zz ;
   zz.reserve( ZdcGeometry::k_NumberOfParametersPerShape ) ;
   zz.emplace_back( an ) ;
   zz.emplace_back( dx ) ;
   zz.emplace_back( dy ) ;
   zz.emplace_back( dz ) ;

   geom->newCell( fc, fc, fc, 
          CaloCellGeometry::getParmPtr( zz, 
                        geom->parMgr(), 
                        geom->parVecVec() ),
          detId ) ;
}