CSCOfflineMonitor Class Reference

#include <CSCOfflineMonitor.h>

Inheritance diagram for CSCOfflineMonitor:

Public Types
enum	AxisType { X =1, Y =2, Z =3 }
enum	LabelType { SMALL, EXTENDED }
Public Types inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
typedef CacheContexts< T... >	CacheTypes
typedef CacheTypes::GlobalCache	GlobalCache
typedef AbilityChecker< T... >	HasAbility
typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache
typedef LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext
typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache
typedef CacheTypes::RunCache	RunCache
typedef RunContextT< RunCache, GlobalCache >	RunContext
typedef CacheTypes::RunSummaryCache	RunSummaryCache
Public Types inherited from edm::stream::EDAnalyzerBase
typedef EDAnalyzerAdaptorBase	ModuleType
Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Public Member Functions
	CSCOfflineMonitor (const edm::ParameterSet &pset)
virtual	~CSCOfflineMonitor ()
Public Member Functions inherited from DQMEDAnalyzer
virtual void	beginRun (edm::Run const &, edm::EventSetup const &) final
virtual void	beginStream (edm::StreamID id) final
virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)
	DQMEDAnalyzer (void)
virtual void	endLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, dqmDetails::NoCache *) const final
virtual void	endRunSummary (edm::Run const &, edm::EventSetup const &, dqmDetails::NoCache *) const final
uint32_t	streamId () const
Public Member Functions inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
	EDAnalyzer ()=default
Public Member Functions inherited from edm::stream::EDAnalyzerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)
	EDAnalyzerBase ()
ModuleDescription const &	moduleDescription () const
virtual	~EDAnalyzerBase ()
Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const
void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...
	EDConsumerBase ()
	EDConsumerBase (EDConsumerBase const &)=delete
	EDConsumerBase (EDConsumerBase &&)=default
ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const
void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const
void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const
std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const
void	labelsForToken (EDGetToken iToken, Labels &oLabels) const
void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const
EDConsumerBase const &	operator= (EDConsumerBase const &)=delete
EDConsumerBase &	operator= (EDConsumerBase &&)=default
bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const
bool	registeredToConsumeMany (TypeID const &, BranchType) const
void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)
virtual	~EDConsumerBase () noexcept(false)

Protected Member Functions
void	analyze (const edm::Event &event, const edm::EventSetup &eventSetup) override
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override
Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)
EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)
template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)
ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...
template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()
void	consumesMany (const TypeToGet &id)
template<BranchType B>
void	consumesMany (const TypeToGet &id)
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)
template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Private Member Functions
void	applyCSClabels (MonitorElement *meHisto, LabelType t, AxisType a)
int	chamberSerial (CSCDetId id)
void	doBXMonitor (edm::Handle< CSCALCTDigiCollection > alcts, edm::Handle< CSCCLCTDigiCollection > clcts, const edm::Event &event, const edm::EventSetup &eventSetup)
void	doEfficiencies (edm::Handle< CSCWireDigiCollection > wires, edm::Handle< CSCStripDigiCollection > strips, edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
void	doOccupancies (edm::Handle< CSCStripDigiCollection > strips, edm::Handle< CSCWireDigiCollection > wires, edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCSegmentCollection > cscSegments, edm::Handle< CSCCLCTDigiCollection > clcts)
void	doPedestalNoise (edm::Handle< CSCStripDigiCollection > strips, edm::ESHandle< CSCGeometry > cscGeom)
void	doRecHits (edm::Handle< CSCRecHit2DCollection > recHits, edm::Handle< CSCStripDigiCollection > strips, edm::ESHandle< CSCGeometry > cscGeom)
void	doResolution (edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
void	doSegments (edm::Handle< CSCSegmentCollection > cscSegments, edm::ESHandle< CSCGeometry > cscGeom)
void	doStripDigis (edm::Handle< CSCStripDigiCollection > strips)
void	doWireDigis (edm::Handle< CSCWireDigiCollection > wires)
double	extrapolate1D (double initPosition, double initDirection, double parameterOfTheLine)
void	fillEfficiencyHistos (int bin, int flag)
float	fitX (const CLHEP::HepMatrix &sp, const CLHEP::HepMatrix &ep)
float	getSignal (const CSCStripDigiCollection &stripdigis, CSCDetId idRH, int centerStrip)
double	lineParametrization (double z1Position, double z2Position, double z1Direction)
int	typeIndex (CSCDetId id, int flag=1)
bool	withinSensitiveRegion (LocalPoint localPos, const std::array< const float, 4 > &layerBounds, int station, int ring, float shiftFromEdge, float shiftFromDeadZone)

Private Attributes
edm::EDGetTokenT< CSCALCTDigiCollection >	al_token
edm::EDGetTokenT< CSCCLCTDigiCollection >	cl_token
MonitorElement *	hALCTgetBX
MonitorElement *	hALCTgetBX2Denominator
MonitorElement *	hALCTgetBX2DNumerator
MonitorElement *	hALCTgetBXSerial
MonitorElement *	hALCTMatch
MonitorElement *	hALCTMatch2Denominator
MonitorElement *	hALCTMatch2DNumerator
MonitorElement *	hALCTMatchSerial
MonitorElement *	hCLCTL1A
MonitorElement *	hCLCTL1A2Denominator
MonitorElement *	hCLCTL1A2DNumerator
MonitorElement *	hCLCTL1ASerial
MonitorElement *	hCSCOccupancy
MonitorElement *	hEffDenominator
MonitorElement *	hORecHits
MonitorElement *	hORecHitsSerial
MonitorElement *	hOSegments
MonitorElement *	hOSegmentsSerial
MonitorElement *	hOStrips
MonitorElement *	hOStripsAndWiresAndCLCT
MonitorElement *	hOStripSerial
MonitorElement *	hOWires
MonitorElement *	hOWiresAndCLCT
MonitorElement *	hOWireSerial
MonitorElement *	hRHden
std::vector< MonitorElement * >	hRHGlobal
MonitorElement *	hRHnrechits
MonitorElement *	hRHnum
std::vector< MonitorElement * >	hRHRatioQ
MonitorElement *	hRHSTE2
std::vector< MonitorElement * >	hRHsterr
std::vector< MonitorElement * >	hRHstpos
std::vector< MonitorElement * >	hRHSumQ
std::vector< MonitorElement * >	hRHTiming
std::vector< MonitorElement * >	hRHTimingAnode
std::vector< MonitorElement * >	hSChiSq
MonitorElement *	hSChiSqAll
std::vector< MonitorElement * >	hSChiSqProb
MonitorElement *	hSChiSqProbAll
MonitorElement *	hSden
MonitorElement *	hSensitiveAreaEvt
MonitorElement *	hSGlobalPhi
MonitorElement *	hSGlobalTheta
std::vector< MonitorElement * >	hSnhits
MonitorElement *	hSnhitsAll
MonitorElement *	hSnSegments
MonitorElement *	hSnum
std::vector< MonitorElement * >	hSResid
MonitorElement *	hSSTE2
MonitorElement *	hSTimeAnode
std::vector< MonitorElement * >	hSTimeAnodeByChamberType
MonitorElement *	hSTimeAnodeSerial
MonitorElement *	hSTimeCathode
std::vector< MonitorElement * >	hSTimeCathodeByChamberType
MonitorElement *	hSTimeCathodeSerial
MonitorElement *	hSTimeCombined
std::vector< MonitorElement * >	hSTimeCombinedByChamberType
MonitorElement *	hSTimeCombinedSerial
MonitorElement *	hSTimeDiff
std::vector< MonitorElement * >	hSTimeDiffByChamberType
MonitorElement *	hSTimeDiffSerial
MonitorElement *	hSTimeVsTOF
MonitorElement *	hSTimeVsZ
MonitorElement *	hStripNFired
std::vector< MonitorElement * >	hStripNumber
std::vector< MonitorElement * >	hStripPed
MonitorElement *	hStripSTE2
MonitorElement *	hWirenGroupsTotal
std::vector< MonitorElement * >	hWireNumber
MonitorElement *	hWireSTE2
std::vector< MonitorElement * >	hWireTBin
edm::ParameterSet	param
edm::EDGetTokenT< FEDRawDataCollection >	rd_token
edm::EDGetTokenT< CSCRecHit2DCollection >	rh_token
edm::EDGetTokenT< CSCStripDigiCollection >	sd_token
edm::EDGetTokenT< CSCSegmentCollection >	se_token
edm::EDGetTokenT< CSCWireDigiCollection >	wd_token

Additional Inherited Members
Static Public Member Functions inherited from DQMEDAnalyzer
static std::shared_ptr< dqmDetails::NoCache >	globalBeginLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *)
static std::shared_ptr< dqmDetails::NoCache >	globalBeginRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *)
static void	globalEndLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *, dqmDetails::NoCache *)
static void	globalEndRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *, dqmDetails::NoCache *)
Static Public Member Functions inherited from edm::stream::EDAnalyzerBase
static const std::string &	baseType ()
static void	fillDescriptions (ConfigurationDescriptions &descriptions)
static void	prevalidate (ConfigurationDescriptions &descriptions)

Detailed Description

Simple package for offline CSC DQM based on RecoLocalMuon/CSCValidation: digis, rechits, segments

Andrew Kubik, Northwestern University, Oct 2008

Definition at line 72 of file CSCOfflineMonitor.h.

Member Enumeration Documentation

enum CSCOfflineMonitor::AxisType

Enumerator
X
Y
Z

Definition at line 80 of file CSCOfflineMonitor.h.

{X=1, Y=2, Z=3};

enum CSCOfflineMonitor::LabelType

Enumerator
SMALL
EXTENDED

Definition at line 79 of file CSCOfflineMonitor.h.

{SMALL, EXTENDED};

Constructor & Destructor Documentation

CSCOfflineMonitor::CSCOfflineMonitor

(

const edm::ParameterSet &

pset

)

Definition at line 13 of file CSCOfflineMonitor.cc.

References edm::ParameterSet::getParameter().

{

  rd_token = consumes<FEDRawDataCollection>( pset.getParameter<edm::InputTag>("FEDRawDataCollectionTag") );
  sd_token = consumes<CSCStripDigiCollection>( pset.getParameter<edm::InputTag>("stripDigiTag") );
  wd_token = consumes<CSCWireDigiCollection>( pset.getParameter<edm::InputTag>("wireDigiTag") );
  al_token = consumes<CSCALCTDigiCollection>( pset.getParameter<edm::InputTag>("alctDigiTag") );
  cl_token = consumes<CSCCLCTDigiCollection>( pset.getParameter<edm::InputTag>("clctDigiTag") );
  rh_token = consumes<CSCRecHit2DCollection>( pset.getParameter<edm::InputTag>("cscRecHitTag") );
  se_token = consumes<CSCSegmentCollection>( pset.getParameter<edm::InputTag>("cscSegTag") );

}

virtual CSCOfflineMonitor::~CSCOfflineMonitor ( )

inlinevirtual

Definition at line 77 of file CSCOfflineMonitor.h.

{ };

Member Function Documentation

void CSCOfflineMonitor::analyze ( const edm::Event &  event, const edm::EventSetup &  eventSetup  )

overrideprotected

Definition at line 564 of file CSCOfflineMonitor.cc.

References cscSegments_cfi::cscSegments, edm::EventSetup::get(), RecoTauPiZeroBuilderPlugins_cfi::strips, and muonCSCDigis_cfi::wires.

                                                                                      {

  edm::Handle<CSCWireDigiCollection> wires;
  edm::Handle<CSCStripDigiCollection> strips;
  edm::Handle<CSCALCTDigiCollection> alcts;
  edm::Handle<CSCCLCTDigiCollection> clcts;
  event.getByToken( sd_token, strips );
  event.getByToken( wd_token, wires );
  event.getByToken( al_token, alcts );
  event.getByToken( cl_token, clcts );

  // Get the CSC Geometry :
  edm::ESHandle<CSCGeometry> cscGeom;
  eventSetup.get<MuonGeometryRecord>().get(cscGeom);

  // Get the RecHits collection :
  edm::Handle<CSCRecHit2DCollection> recHits;
  event.getByToken( rh_token, recHits );

  // get CSC segment collection
  edm::Handle<CSCSegmentCollection> cscSegments;
  event.getByToken( se_token, cscSegments );

  doOccupancies(strips,wires,recHits,cscSegments,clcts);
  doStripDigis(strips);
  doWireDigis(wires);
  doRecHits(recHits,strips,cscGeom);
  doSegments(cscSegments,cscGeom);
  doResolution(cscSegments,cscGeom);
  doPedestalNoise(strips, cscGeom);
  doEfficiencies(wires,strips, recHits, cscSegments,cscGeom);
  doBXMonitor(alcts, clcts, event, eventSetup);
}

void CSCOfflineMonitor::applyCSClabels ( MonitorElement *  meHisto, LabelType  t, AxisType  a  )

private

Definition at line 1904 of file CSCOfflineMonitor.cc.

References DEFINE_FWK_MODULE, NULL, MonitorElement::setAxisTitle(), MonitorElement::setBinLabel(), and SMALL.

                                                                                    {
  if (me != NULL)
  {
    me->setAxisTitle("Chamber #");
    if (t == EXTENDED)
    {
      me->setBinLabel(1,"ME -4/2",a);
      me->setBinLabel(2,"ME -4/1",a);
      me->setBinLabel(3,"ME -3/2",a);
      me->setBinLabel(4,"ME -3/1",a);
      me->setBinLabel(5,"ME -2/2",a);
      me->setBinLabel(6,"ME -2/1",a);
      me->setBinLabel(7,"ME -1/3",a);
      me->setBinLabel(8,"ME -1/2",a);
      me->setBinLabel(9,"ME -1/1b",a);
      me->setBinLabel(10,"ME -1/1a",a);
      me->setBinLabel(11,"ME +1/1a",a);
      me->setBinLabel(12,"ME +1/1b",a);
      me->setBinLabel(13,"ME +1/2",a);
      me->setBinLabel(14,"ME +1/3",a);
      me->setBinLabel(15,"ME +2/1",a);
      me->setBinLabel(16,"ME +2/2",a);
      me->setBinLabel(17,"ME +3/1",a);
      me->setBinLabel(18,"ME +3/2",a);
      me->setBinLabel(19,"ME +4/1",a);
      me->setBinLabel(20,"ME +4/2",a);
    }
    else if (t == SMALL)
    {
      me->setBinLabel(1,"ME -4/1",a);
      me->setBinLabel(2,"ME -3/2",a);
      me->setBinLabel(3,"ME -3/1",a);
      me->setBinLabel(4,"ME -2/2",a);
      me->setBinLabel(5,"ME -2/1",a);
      me->setBinLabel(6,"ME -1/3",a);
      me->setBinLabel(7,"ME -1/2",a);
      me->setBinLabel(8,"ME -1/1b",a);
      me->setBinLabel(9,"ME -1/1a",a);
      me->setBinLabel(10,"ME +1/1a",a);
      me->setBinLabel(11,"ME +1/1b",a);
      me->setBinLabel(12,"ME +1/2",a);
      me->setBinLabel(13,"ME +1/3",a);
      me->setBinLabel(14,"ME +2/1",a);
      me->setBinLabel(15,"ME +2/2",a);
      me->setBinLabel(16,"ME +3/1",a);
      me->setBinLabel(17,"ME +3/2",a);
      me->setBinLabel(18,"ME +4/1",a);
    }
  }
}

void CSCOfflineMonitor::bookHistograms ( DQMStore::IBooker &  ibooker, edm::Run const &  iRun, edm::EventSetup const &    )

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 26 of file CSCOfflineMonitor.cc.

References DQMStore::IBooker::book1D(), DQMStore::IBooker::book2D(), DQMStore::IBooker::cd(), MonitorElement::setAxisTitle(), MonitorElement::setBinLabel(), DQMStore::IBooker::setCurrentFolder(), X, and DOFs::Y.

{
      // occupancies
      ibooker.cd();
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Occupancy");

      hCSCOccupancy = ibooker.book1D("hCSCOccupancy","overall CSC occupancy",13,-0.5,12.5);
      hCSCOccupancy->setBinLabel(2,"Total Events");
      hCSCOccupancy->setBinLabel(4,"# Events with Wires");
      hCSCOccupancy->setBinLabel(6,"# Events with Strips");
      hCSCOccupancy->setBinLabel(8,"# Events with Wires&Strips");
      hCSCOccupancy->setBinLabel(10,"# Events with Rechits");
      hCSCOccupancy->setBinLabel(12,"# Events with Segments");
      hOWiresAndCLCT = ibooker.book2D("hOWiresAndCLCT","Wire and CLCT Digi Occupancy ",36,0.5,36.5,20,0.5,20.5);
      hOWires = ibooker.book2D("hOWires","Wire Digi Occupancy",36,0.5,36.5,20,0.5,20.5);
      hOWireSerial = ibooker.book1D("hOWireSerial","Wire Occupancy by Chamber Serial",601,-0.5,600.5);
      hOWireSerial->setAxisTitle("Chamber Serial Number");
      hOStrips = ibooker.book2D("hOStrips","Strip Digi Occupancy",36,0.5,36.5,20,0.5,20.5);
      hOStripSerial = ibooker.book1D("hOStripSerial","Strip Occupancy by Chamber Serial",601,-0.5,600.5);
      hOStripSerial->setAxisTitle("Chamber Serial Number");
      hOStripsAndWiresAndCLCT = ibooker.book2D("hOStripsAndWiresAndCLCT","Strip And Wire And CLCT Digi Occupancy",36,0.5,36.5,20,0.5,20.5);
      hOStripsAndWiresAndCLCT->setAxisTitle("Chamber #");
      hORecHits = ibooker.book2D("hORecHits","RecHit Occupancy",36,0.5,36.5,20,0.5,20.5);
      hORecHitsSerial = ibooker.book1D("hORecHitSerial","RecHit Occupancy by Chamber Serial",601,-0.5,600.5);
      hORecHitsSerial->setAxisTitle("Chamber Serial Number");
      hOSegments = ibooker.book2D("hOSegments","Segment Occupancy",36,0.5,36.5,20,0.5,20.5);
      hOSegmentsSerial = ibooker.book1D("hOSegmentSerial","Segment Occupancy by Chamber Serial",601,-0.5,600.5);
      hOSegmentsSerial->setAxisTitle("Chamber Serial Number");

      // wire digis
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Digis");

      hWirenGroupsTotal = ibooker.book1D("hWirenGroupsTotal","Fired Wires per Event; # Wiregroups Fired",500,-0.5,499.5);
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m42","Wire TBin Fired (ME -4/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m41","Wire TBin Fired (ME -4/1); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m32","Wire TBin Fired (ME -3/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m31","Wire TBin Fired (ME -3/1); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m22","Wire TBin Fired (ME -2/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m21","Wire TBin Fired (ME -2/1); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m11a","Wire TBin Fired (ME -1/1a); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m13","Wire TBin Fired (ME -1/3); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m12","Wire TBin Fired (ME -1/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_m11b","Wire TBin Fired (ME -1/1b); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p11b","Wire TBin Fired (ME +1/1b); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p12","Wire TBin Fired (ME +1/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p13","Wire TBin Fired (ME +1/3); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p11a","Wire TBin Fired (ME +1/1a); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p21","Wire TBin Fired (ME +2/1); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p22","Wire TBin Fired (ME +2/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p31","Wire TBin Fired (ME +3/1); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p32","Wire TBin Fired (ME +3/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p41","Wire TBin Fired (ME +4/1); Time Bin (25ns)",17,-0.5,16.5));
      hWireTBin.push_back(ibooker.book1D("hWireTBin_p42","Wire TBin Fired (ME +4/2); Time Bin (25ns)",17,-0.5,16.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m42","Wiregroup Number Fired (ME -4/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m41","Wiregroup Number Fired (ME -4/1); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m32","Wiregroup Number Fired (ME -3/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m31","Wiregroup Number Fired (ME -3/1); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m22","Wiregroup Number Fired (ME -2/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m21","Wiregroup Number Fired (ME -2/1); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m11a","Wiregroup Number Fired (ME -1/1a); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m13","Wiregroup Number Fired (ME -1/3); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m12","Wiregroup Number Fired (ME -1/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_m11b","Wiregroup Number Fired (ME -1/1b); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p11b","Wiregroup Number Fired (ME +1/1b); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p12","Wiregroup Number Fired (ME +1/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p13","Wiregroup Number Fired (ME +1/3); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p11a","Wiregroup Number Fired (ME +1/1a); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p21","Wiregroup Number Fired (ME +2/1); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p22","Wiregroup Number Fired (ME +2/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p31","Wiregroup Number Fired (ME +3/1); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p32","Wiregroup Number Fired (ME +3/2); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p41","Wiregroup Number Fired (ME +4/1); Wiregroup #",113,-0.5,112.5));
      hWireNumber.push_back(ibooker.book1D("hWireNumber_p42","Wiregroup Number Fired (ME +4/2); Wiregroup #",113,-0.5,112.5));

      // strip digis
      hStripNFired = ibooker.book1D("hStripNFired","Fired Strips per Event; # Strips Fired (above 13 ADC)",1000,-0.5,999.5);
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m42","Strip Number Fired (ME -4/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m41","Strip Number Fired (ME -4/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m32","Strip Number Fired (ME -3/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m31","Strip Number Fired (ME -3/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m22","Strip Number Fired (ME -2/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m21","Strip Number Fired (ME -2/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m11a","Strip Number Fired (ME -1/1a); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m13","Strip Number Fired (ME -1/3); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m12","Strip Number Fired (ME -1/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_m11b","Strip Number Fired (ME -1/1b); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p11b","Strip Number Fired (ME +1/1b); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p12","Strip Number Fired (ME +1/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p13","Strip Number Fired (ME +1/3); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p11a","Strip Number Fired (ME +1/1a); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p21","Strip Number Fired (ME +2/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p22","Strip Number Fired (ME +2/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p31","Strip Number Fired (ME +3/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p32","Strip Number Fired (ME +3/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p41","Strip Number Fired (ME +4/1); Strip # Fired (above 13 ADC)",81,-0.5,80.5));
      hStripNumber.push_back(ibooker.book1D("hStripNumber_p42","Stripgroup Number Fired (ME +4/2); Strip # Fired (above 13 ADC)",81,-0.5,80.5));

      // pedestal noise
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/PedestalNoise");

      hStripPed.push_back(ibooker.book1D("hStripPedMEm42","Pedestal Noise Distribution Chamber ME -4/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm41","Pedestal Noise Distribution Chamber ME -4/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm32","Pedestal Noise Distribution Chamber ME -3/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm31","Pedestal Noise Distribution Chamber ME -3/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm22","Pedestal Noise Distribution Chamber ME -2/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm21","Pedestal Noise Distribution Chamber ME -2/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm11a","Pedestal Noise Distribution Chamber ME -1/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm13","Pedestal Noise Distribution Chamber ME -1/3; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm12","Pedestal Noise Distribution Chamber ME -1/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEm11b","Pedestal Noise Distribution Chamber ME -1/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp11b","Pedestal Noise Distribution Chamber ME +1/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp12","Pedestal Noise Distribution Chamber ME +1/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp13","Pedestal Noise Distribution Chamber ME +1/3; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp11a","Pedestal Noise Distribution Chamber ME +1/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp21","Pedestal Noise Distribution Chamber ME +2/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp22","Pedestal Noise Distribution Chamber ME +2/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp31","Pedestal Noise Distribution Chamber ME +3/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp32","Pedestal Noise Distribution Chamber ME +3/2; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp41","Pedestal Noise Distribution Chamber ME +4/1; ADC Counts",50,-25.,25.));
      hStripPed.push_back(ibooker.book1D("hStripPedMEp42","Pedestal Noise Distribution Chamber ME +4/2; ADC Counts",50,-25.,25.));

      // rechits
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/recHits");

      hRHnrechits = ibooker.book1D("hRHnrechits","recHits per Event (all chambers); # of RecHits",500,-0.50,499.5);
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalp1","recHit global X,Y station +1; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalp2","recHit global X,Y station +2; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalp3","recHit global X,Y station +3; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalp4","recHit global X,Y station +4; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalm1","recHit global X,Y station -1; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalm2","recHit global X,Y station -2; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalm3","recHit global X,Y station -3; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHGlobal.push_back(ibooker.book2D("hRHGlobalm4","recHit global X,Y station -4; Global X (cm); Global Y (cm)",100,-800.,800.,100,-800.,800.));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm42","Sum 3x3 recHit Charge (ME -4/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm41","Sum 3x3 recHit Charge (ME -4/1); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm32","Sum 3x3 recHit Charge (ME -3/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm31","Sum 3x3 recHit Charge (ME -3/1); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm22","Sum 3x3 recHit Charge (ME -2/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm21","Sum 3x3 recHit Charge (ME -2/1); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm11a","Sum 3x3 recHit Charge (ME -1/1a); ADC counts",100,0,4000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm13","Sum 3x3 recHit Charge (ME -1/3); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm12","Sum 3x3 recHit Charge (ME -1/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQm11b","Sum 3x3 recHit Charge (ME -1/1b); ADC counts",100,0,4000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp11b","Sum 3x3 recHit Charge (ME +1/1b); ADC counts",100,0,4000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp12","Sum 3x3 recHit Charge (ME +1/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp13","Sum 3x3 recHit Charge (ME +1/3); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp11a","Sum 3x3 recHit Charge (ME +1/1a); ADC counts",100,0,4000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp21","Sum 3x3 recHit Charge (ME +2/1); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp22","Sum 3x3 recHit Charge (ME +2/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp31","Sum 3x3 recHit Charge (ME +3/1); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp32","Sum 3x3 recHit Charge (ME +3/2); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp41","Sum 3x3 recHit Charge (ME +4/1); ADC counts",100,0,2000));
      hRHSumQ.push_back(ibooker.book1D("hRHSumQp42","Sum 3x3 recHit Charge (ME +4/2); ADC counts",100,0,2000));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm42","Charge Ratio (Ql+Qr)/Qt (ME -4/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm41","Charge Ratio (Ql+Qr)/Qt (ME -4/1); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm32","Charge Ratio (Ql+Qr)/Qt (ME -3/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm31","Charge Ratio (Ql+Qr)/Qt (ME -3/1); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm22","Charge Ratio (Ql+Qr)/Qt (ME -2/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm21","Charge Ratio (Ql+Qr)/Qt (ME -2/1); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm11a","Charge Ratio (Ql+Qr)/Qt (ME -1/1a); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm13","Charge Ratio (Ql+Qr)/Qt (ME -1/3); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm12","Charge Ratio (Ql+Qr)/Qt (ME -1/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQm11b","Charge Ratio (Ql+Qr)/Qt (ME -1/1b); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp11b","Charge Ratio (Ql+Qr)/Qt (ME +1/1b); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp12","Charge Ratio (Ql+Qr)/Qt (ME +1/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp13","Charge Ratio (Ql+Qr)/Qt (ME +1/3); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp11a","Charge Ratio (Ql+Qr)/Qt (ME +1/1a); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp21","Charge Ratio (Ql+Qr)/Qt (ME +2/1); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp22","Charge Ratio (Ql+Qr)/Qt (ME +2/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp31","Charge Ratio (Ql+Qr)/Qt (ME +3/1); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp32","Charge Ratio (Ql+Qr)/Qt (ME +3/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp41","Charge Ratio (Ql+Qr)/Qt (ME +4/1); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHRatioQ.push_back(ibooker.book1D("hRHRatioQp42","Charge Ratio (Ql+Qr)/Qt (ME +4/2); (Ql+Qr)/Qt",100,-0.1,1.1));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm42","recHit Time (ME -4/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm41","recHit Time (ME -4/1); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm32","recHit Time (ME -3/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm31","recHit Time (ME -3/1); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm22","recHit Time (ME -2/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm21","recHit Time (ME -2/1); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm11a","recHit Time (ME -1/1a); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm13","recHit Time (ME -1/3); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm12","recHit Time (ME -1/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingm11b","recHit Time (ME -1/1b); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp11b","recHit Time (ME +1/1b); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp12","recHit Time (ME +1/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp13","recHit Time (ME +1/3); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp11a","recHit Time (ME +1/1a); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp21","recHit Time (ME +2/1); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp22","recHit Time (ME +2/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp31","recHit Time (ME +3/1); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp32","recHit Time (ME +3/2); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp41","recHit Time (ME +4/1); ns",200,-500.,500.));
      hRHTiming.push_back(ibooker.book1D("hRHTimingp42","recHit Time (ME +4/2); ns",200,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem42","Anode recHit Time (ME -4/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem41","Anode recHit Time (ME -4/1); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem32","Anode recHit Time (ME -3/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem31","Anode recHit Time (ME -3/1); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem22","Anode recHit Time (ME -2/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem21","Anode recHit Time (ME -2/1); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem11a","Anode recHit Time (ME -1/1a); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem13","Anode recHit Time (ME -1/3); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem12","Anode recHit Time (ME -1/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodem11b","Anode recHit Time (ME -1/1b); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep11b","Anode recHit Time (ME +1/1b); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep12","Anode recHit Time (ME +1/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep13","Anode recHit Time (ME +1/3); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep11a","Anode recHit Time (ME +1/1a); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep21","Anode recHit Time (ME +2/1); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep22","Anode recHit Time (ME +2/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep31","Anode recHit Time (ME +3/1); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep32","Anode recHit Time (ME +3/2); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep41","Anode recHit Time (ME +4/1); ns",80,-500.,500.));
      hRHTimingAnode.push_back(ibooker.book1D("hRHTimingAnodep42","Anode recHit Time (ME +4/2); ns",80,-500.,500.));
      hRHstpos.push_back(ibooker.book1D("hRHstposm42","Reconstructed Position on Strip (ME -4/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm41","Reconstructed Position on Strip (ME -4/1); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm32","Reconstructed Position on Strip (ME -3/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm31","Reconstructed Position on Strip (ME -3/1); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm22","Reconstructed Position on Strip (ME -2/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm21","Reconstructed Position on Strip (ME -2/1); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm11a","Reconstructed Position on Strip (ME -1/1a); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm13","Reconstructed Position on Strip (ME -1/3); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm12","Reconstructed Position on Strip (ME -1/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposm11b","Reconstructed Position on Strip (ME -1/1b); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp11b","Reconstructed Position on Strip (ME +1/1b); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp12","Reconstructed Position on Strip (ME +1/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp13","Reconstructed Position on Strip (ME +1/3); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp11a","Reconstructed Position on Strip (ME +1/1a); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp21","Reconstructed Position on Strip (ME +2/1); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp22","Reconstructed Position on Strip (ME +2/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp31","Reconstructed Position on Strip (ME +3/1); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp32","Reconstructed Position on Strip (ME +3/2); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp41","Reconstructed Position on Strip (ME +4/1); Strip Widths",120,-0.6,0.6));
      hRHstpos.push_back(ibooker.book1D("hRHstposp42","Reconstructed Position on Strip (ME +4/2); Strip Widths",120,-0.6,0.6));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm42","Estimated Error on Strip Measurement (ME -4/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm41","Estimated Error on Strip Measurement (ME -4/1); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm32","Estimated Error on Strip Measurement (ME -3/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm31","Estimated Error on Strip Measurement (ME -3/1); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm22","Estimated Error on Strip Measurement (ME -2/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm21","Estimated Error on Strip Measurement (ME -2/1); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm11a","Estimated Error on Strip Measurement (ME -1/1a); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm13","Estimated Error on Strip Measurement (ME -1/3); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm12","Estimated Error on Strip Measurement (ME -1/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrm11b","Estimated Error on Strip Measurement (ME -1/1b); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp11b","Estimated Error on Strip Measurement (ME +1/1b); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp12","Estimated Error on Strip Measurement (ME +1/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp13","Estimated Error on Strip Measurement (ME +1/3); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp11a","Estimated Error on Strip Measurement (ME +1/1a); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp21","Estimated Error on Strip Measurement (ME +2/1); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp22","Estimated Error on Strip Measurement (ME +2/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp31","Estimated Error on Strip Measurement (ME +3/1); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp32","Estimated Error on Strip Measurement (ME +3/2); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp41","Estimated Error on Strip Measurement (ME +4/1); Strip Widths",75,-0.01,0.24));
      hRHsterr.push_back(ibooker.book1D("hRHsterrp42","Estimated Error on Strip Measurement (ME +4/2); Strip Widths",75,-0.01,0.24));

      // segments
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Segments");

      hSnSegments   = ibooker.book1D("hSnSegments","Number of Segments per Event; # of Segments",26,-0.5,25.5);
      hSnhitsAll = ibooker.book1D("hSnhits","N hits on Segments; # of hits",8,-0.5,7.5);
      hSnhits.push_back(ibooker.book1D("hSnhitsm42","# of hits on Segments (ME -4/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm41","# of hits on Segments (ME -4/1); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm32","# of hits on Segments (ME -3/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm31","# of hits on Segments (ME -3/1); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm22","# of hits on Segments (ME -2/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm21","# of hits on Segments (ME -2/1); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm11a","# of hits on Segments (ME -1/1a); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm13","# of hits on Segments (ME -1/3); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm12","# of hits on Segments (ME -1/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsm11b","# of hits on Segments (ME -1/1b); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp11b","# of hits on Segments (ME +1/1b); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp12","# of hits on Segments (ME +1/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp13","# of hits on Segments (ME +1/3); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp11a","# of hits on Segments (ME +1/1a); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp21","# of hits on Segments (ME +2/1); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp22","# of hits on Segments (ME +2/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp31","# of hits on Segments (ME +3/1); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp32","# of hits on Segments (ME +3/2); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp41","# of hits on Segments (ME +4/1); # of hits",8,-0.5,7.5));
      hSnhits.push_back(ibooker.book1D("hSnhitsp42","# of hits on Segments (ME +4/2); # of hits",8,-0.5,7.5));
      hSChiSqAll = ibooker.book1D("hSChiSq","Segment Normalized Chi2; Chi2/ndof",110,-0.05,10.5);
      hSChiSq.push_back(ibooker.book1D("hSChiSqm42","Segment Normalized Chi2 (ME -4/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm41","Segment Normalized Chi2 (ME -4/1); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm32","Segment Normalized Chi2 (ME -3/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm31","Segment Normalized Chi2 (ME -3/1); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm22","Segment Normalized Chi2 (ME -2/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm21","Segment Normalized Chi2 (ME -2/1); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm11a","Segment Normalized Chi2 (ME -1/1a); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm13","Segment Normalized Chi2 (ME -1/3); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm12","Segment Normalized Chi2 (ME -1/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqm11b","Segment Normalized Chi2 (ME -1/1b); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp11b","Segment Normalized Chi2 (ME +1/1b); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp12","Segment Normalized Chi2 (ME +1/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp13","Segment Normalized Chi2 (ME +1/3); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp11a","Segment Normalized Chi2 (ME +1/1a); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp21","Segment Normalized Chi2 (ME +2/1); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp22","Segment Normalized Chi2 (ME +2/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp31","Segment Normalized Chi2 (ME +3/1); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp32","Segment Normalized Chi2 (ME +3/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp41","Segment Normalized Chi2 (ME +4/1); Chi2/ndof",110,-0.05,10.5));
      hSChiSq.push_back(ibooker.book1D("hSChiSqp42","Segment Normalized Chi2 (ME +4/2); Chi2/ndof",110,-0.05,10.5));
      hSChiSqProbAll = ibooker.book1D("hSChiSqProb","Segment chi2 Probability; Probability",110,-0.05,1.05);
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm42","Segment chi2 Probability (ME -4/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm41","Segment chi2 Probability (ME -4/1); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm32","Segment chi2 Probability (ME -3/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm31","Segment chi2 Probability (ME -3/1); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm22","Segment chi2 Probability (ME -2/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm21","Segment chi2 Probability (ME -2/1); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm11a","Segment chi2 Probability (ME -1/1a); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm13","Segment chi2 Probability (ME -1/3); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm12","Segment chi2 Probability (ME -1/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbm11b","Segment chi2 Probability (ME -1/1b); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp11b","Segment chi2 Probability (ME +1/1b); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp12","Segment chi2 Probability (ME +1/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp13","Segment chi2 Probability (ME +1/3); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp11a","Segment chi2 Probability (ME +1/1a); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp21","Segment chi2 Probability (ME +2/1); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp22","Segment chi2 Probability (ME +2/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp31","Segment chi2 Probability (ME +3/1); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp32","Segment chi2 Probability (ME +3/2); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp41","Segment chi2 Probability (ME +4/1); Probability",110,-0.05,1.05));
      hSChiSqProb.push_back(ibooker.book1D("hSChiSqProbp42","Segment chi2 Probability (ME +4/2); Probability",110,-0.05,1.05));
      hSGlobalTheta = ibooker.book1D("hSGlobalTheta","Segment Direction (Global Theta); Global Theta (radians)",136,-0.1,3.3);
      hSGlobalPhi   = ibooker.book1D("hSGlobalPhi","Segment Direction (Global Phi); Global Phi (radians)",  128,-3.2,3.2);

          hSTimeDiff  = ibooker.book1D("hSTimeDiff", "Anode Minus Cathode Segment Time [ns]",50,-50,50);
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m42", "Anode Minus Cathode Segment Time (ME -4/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m41", "Anode Minus Cathode Segment Time (ME -4/1) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m32", "Anode Minus Cathode Segment Time (ME -3/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m31", "Anode Minus Cathode Segment Time (ME -3/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m22", "Anode Minus Cathode Segment Time (ME -2/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m21", "Anode Minus Cathode Segment Time (ME -2/1) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m11a", "Anode Minus Cathode Segment Time (ME -1/1a) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m13", "Anode Minus Cathode Segment Time (ME -1/3) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m12", "Anode Minus Cathode Segment Time (ME -1/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_m11b", "Anode Minus Cathode Segment Time (ME -1/1b) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p11b", "Anode Minus Cathode Segment Time (ME +1/1b) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p12", "Anode Minus Cathode Segment Time (ME +1/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p13", "Anode Minus Cathode Segment Time (ME +1/3) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p11a", "Anode Minus Cathode Segment Time (ME +1/1a) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p21", "Anode Minus Cathode Segment Time (ME +2/1) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p22", "Anode Minus Cathode Segment Time (ME +2/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p31", "Anode Minus Cathode Segment Time (ME +3/1) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p32", "Anode Minus Cathode Segment Time (ME +3/2) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p41", "Anode Minus Cathode Segment Time (ME +4/1) [ns]",50,-50,50));
          hSTimeDiffByChamberType.push_back(ibooker.book1D("hSTimeDiff_p42", "Anode Minus Cathode Segment Time (ME +4/2) [ns]",50,-50,50));

          hSTimeAnode  = ibooker.book1D("hSTimeAnode", "Anode Only Segment Time  [ns]",200,-200,200);
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m42", "Anode Only Segment Time (ME -4/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m41", "Anode Only Segment Time (ME -4/1) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m32", "Anode Only Segment Time (ME -3/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m31", "Anode Only Segment Time (ME -3/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m22", "Anode Only Segment Time (ME -2/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m21", "Anode Only Segment Time (ME -2/1) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m11a", "Anode Only Segment Time (ME -1/1a) [ns]",200,-200,200));       
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m13", "Anode Only Segment Time (ME -1/3) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m12", "Anode Only Segment Time (ME -1/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_m11b", "Anode Only Segment Time (ME -1/1b) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p11b", "Anode Only Segment Time (ME +1/1b) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p12", "Anode Only Segment Time (ME +1/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p13", "Anode Only Segment Time (ME +1/3) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p11a", "Anode Only Segment Time (ME +1/1a) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p21", "Anode Only Segment Time (ME +2/1) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p22", "Anode Only Segment Time (ME +2/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p31", "Anode Only Segment Time (ME +3/1) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p32", "Anode Only Segment Time (ME +3/2) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p41", "Anode Only Segment Time (ME +4/1) [ns]",200,-200,200));
          hSTimeAnodeByChamberType.push_back(ibooker.book1D("hSTimeAnode_p42", "Anode Only Segment Time (ME +4/2) [ns]",200,-200,200));

      hSTimeCathode  = ibooker.book1D("hSTimeCathode", "Cathode Only Segment Time  [ns]",200,-200,200);
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m42", "Cathode Only Segment Time (ME -4/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m41", "Cathode Only Segment Time (ME -4/1) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m32", "Cathode Only Segment Time (ME -3/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m31", "Cathode Only Segment Time (ME -3/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m22", "Cathode Only Segment Time (ME -2/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m21", "Cathode Only Segment Time (ME -2/1) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m11a", "Cathode Only Segment Time (ME -1/1a) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m13", "Cathode Only Segment Time (ME -1/3) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m12", "Cathode Only Segment Time (ME -1/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_m11b", "Cathode Only Segment Time (ME -1/1b) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p11b", "Cathode Only Segment Time (ME +1/1b) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p12", "Cathode Only Segment Time (ME +1/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p13", "Cathode Only Segment Time (ME +1/3) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p11a", "Cathode Only Segment Time (ME +1/1a) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p21", "Cathode Only Segment Time (ME +2/1) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p22", "Cathode Only Segment Time (ME +2/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p31", "Cathode Only Segment Time (ME +3/1) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p32", "Cathode Only Segment Time (ME +3/2) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p41", "Cathode Only Segment Time (ME +4/1) [ns]",200,-200,200));
          hSTimeCathodeByChamberType.push_back(ibooker.book1D("hSTimeCathode_p42", "Cathode Only Segment Time (ME +4/2) [ns]",200,-200,200));

      hSTimeCombined = ibooker.book1D("hSTimeCombined", "Segment Time (anode+cathode times) [ns]",200,-200,200);
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m42", "Segment Time (anode+cathode times) Segment Time (ME -4/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m41", "Segment Time (anode+cathode times) Segment Time (ME -4/1) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m32", "Segment Time (anode+cathode times) Segment Time (ME -3/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m31", "Segment Time (anode+cathode times) Segment Time (ME -3/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m22", "Segment Time (anode+cathode times) Segment Time (ME -2/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m21", "Segment Time (anode+cathode times) Segment Time (ME -2/1) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m11a", "Segment Time (anode+cathode times) Segment Time (ME -1/1a) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m13", "Segment Time (anode+cathode times) Segment Time (ME -1/3) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m12", "Segment Time (anode+cathode times) Segment Time (ME -1/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_m11b", "Segment Time (anode+cathode times) Segment Time (ME -1/1b) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p11b", "Segment Time (anode+cathode times) Segment Time (ME +1/1b) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p12", "Segment Time (anode+cathode times) Segment Time (ME +1/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p13", "Segment Time (anode+cathode times) Segment Time (ME +1/3) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p11a", "Segment Time (anode+cathode times) Segment Time (ME +1/1a) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p21", "Segment Time (anode+cathode times) Segment Time (ME +2/1) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p22", "Segment Time (anode+cathode times) Segment Time (ME +2/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p31", "Segment Time (anode+cathode times) Segment Time (ME +3/1) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p32", "Segment Time (anode+cathode times) Segment Time (ME +3/2) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p41", "Segment Time (anode+cathode times) Segment Time (ME +4/1) [ns]",200,-200,200));
          hSTimeCombinedByChamberType.push_back(ibooker.book1D("hSTimeCombined_p42", "Segment Time (anode+cathode times) Segment Time (ME +4/2) [ns]",200,-200,200));

          hSTimeDiffSerial  = ibooker.book2D("hSTimeDiffSerial", "Anode Minus Cathode Segment Time  [ns]",601,-0.5,600.5,200,-50,50);
          hSTimeAnodeSerial  = ibooker.book2D("hSTimeAnodeSerial", "Anode Only Segment Time  [ns]",601,-0.5,600.5,200,-200,200);
          hSTimeCathodeSerial  = ibooker.book2D("hSTimeCathodeSerial", "Cathode Only Segment Time  [ns]",601,-0.5,600.5,200,-200,200);
          hSTimeCombinedSerial = ibooker.book2D("hSTimeCombinedSerial", "Segment Time (anode+cathode times) [ns]",601,-0.5,600.5,200,-200,200);


      hSTimeVsZ   = ibooker.book2D("hSTimeVsZ","Segment Time vs. Z; [ns] vs. [cm]",200,-1200,1200,200,-200,200);
      hSTimeVsTOF = ibooker.book2D("hSTimeVsTOF","Segment Time vs. Distance from IP; [ns] vs. [cm]",180,500,1400, 200,-200,200);


      // resolution
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Resolution");

      hSResid.push_back(ibooker.book1D("hSResidm42","Fitted Position on Strip - Reconstructed for Layer 3 (ME -4/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm41","Fitted Position on Strip - Reconstructed for Layer 3 (ME -4/1); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm32","Fitted Position on Strip - Reconstructed for Layer 3 (ME -3/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm31","Fitted Position on Strip - Reconstructed for Layer 3 (ME -3/1); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm22","Fitted Position on Strip - Reconstructed for Layer 3 (ME -2/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm21","Fitted Position on Strip - Reconstructed for Layer 3 (ME -2/1); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm11a","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/1a); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm13","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/3); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm12","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidm11b","Fitted Position on Strip - Reconstructed for Layer 3 (ME -1/1b); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp11b","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/1b); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp12","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp13","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/3); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp11a","Fitted Position on Strip - Reconstructed for Layer 3 (ME +1/1a); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp21","Fitted Position on Strip - Reconstructed for Layer 3 (ME +2/1); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp22","Fitted Position on Strip - Reconstructed for Layer 3 (ME +2/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp31","Fitted Position on Strip - Reconstructed for Layer 3 (ME +3/1); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp32","Fitted Position on Strip - Reconstructed for Layer 3 (ME +3/2); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp41","Fitted Position on Strip - Reconstructed for Layer 3 (ME +4/1); Strip Widths",100,-0.5,0.5));
      hSResid.push_back(ibooker.book1D("hSResidp42","Fitted Position on Strip - Reconstructed for Layer 3 (ME +4/2); Strip Widths",100,-0.5,0.5));

      // efficiency
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/Efficiency");

      //      hSSTE = ibooker.book1D("hSSTE","hSSTE",40,0.5,40.5);
      //      hRHSTE = ibooker.book1D("hRHSTE","hRHSTE",40,0.5,40.5);
      hSnum = ibooker.book1D("hSnum", "CSC w rechits in 2+ layers && segment(s)", 20, 0.5, 20.5);
      hSden = ibooker.book1D("hSden", "CSC w rechits in 2+ layers", 20, 0.5, 20.5);
      hRHnum = ibooker.book1D("hRHnum", "CSC w segment(s) && rechits in 6 layers", 20, 0.5, 20.5);
      hRHden = ibooker.book1D("hRHden", "CSC w segment(s)", 20, 0.5, 20.5);
      applyCSClabels(hSnum, EXTENDED, X);
      applyCSClabels(hSden, EXTENDED, X);
      applyCSClabels(hRHnum, EXTENDED, X);
      applyCSClabels(hRHden, EXTENDED, X);

      //      hSEff = ibooker.book1D("hSEff","Segment Efficiency",20,0.5,20.5);
      //      hRHEff = ibooker.book1D("hRHEff","recHit Efficiency",20,0.5,20.5);
      hSSTE2 = ibooker.book2D("hSSTE2","hSSTE2",36,0.5,36.5, 20, 0.5, 20.5);
      hRHSTE2 = ibooker.book2D("hRHSTE2","hRHSTE2",36,0.5,36.5, 20, 0.5, 20.5);
      hStripSTE2 = ibooker.book2D("hStripSTE2","hStripSTE2",36,0.5,36.5, 20, 0.5, 20.5);
      hWireSTE2 = ibooker.book2D("hWireSTE2","hWireSTE2",36,0.5,36.5, 20, 0.5, 20.5);
      hEffDenominator = ibooker.book2D("hEffDenominator","hEffDenominator",36,0.5,36.5, 20, 0.5, 20.5);
      //      hSEff2 = ibooker.book2D("hSEff2","Segment Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
      //      hRHEff2 = ibooker.book2D("hRHEff2","recHit Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
      //      hStripReadoutEff2 = ibooker.book2D("hStripReadoutEff2","strip readout ratio [(strip+clct+wires)/(clct+wires)] 2D",36,0.5,36.5, 20, 0.5, 20.5);
      //      hStripReadoutEff2->setAxisTitle("Chamber #");
      //      hStripEff2 = ibooker.book2D("hStripEff2","strip Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
      //      hWireEff2 = ibooker.book2D("hWireEff2","wire Efficiency 2D",36,0.5,36.5, 18, 0.5, 18.5);
      hSensitiveAreaEvt = ibooker.book2D("hSensitiveAreaEvt","Events Passing Selection for Efficiency",36,0.5,36.5, 20, 0.5, 20.5);

      // bx monitor for trigger synchronization
      ibooker.setCurrentFolder("CSC/CSCOfflineMonitor/BXMonitor");

      hALCTgetBX = ibooker.book1D("hALCTgetBX","ALCT position in ALCT-L1A match window [BX]",7,-0.5,6.5);
      //      hALCTgetBXChamberMeans = ibooker.book1D("hALCTgetBXChamberMeans","Chamber Mean ALCT position in ALCT-L1A match window [BX]",60,0,6);
      hALCTgetBXSerial = ibooker.book2D("hALCTgetBXSerial","ALCT position in ALCT-L1A match window [BX]",601,-0.5,600.5,7,-0.5,6.5);
      hALCTgetBXSerial->setAxisTitle("Chamber Serial Number");
      hALCTgetBX2DNumerator = ibooker.book2D("hALCTgetBX2DNumerator","ALCT position in ALCT-L1A match window [BX] (sum)",36,0.5,36.5,20,0.5,20.5);
      //      hALCTgetBX2DMeans = ibooker.book2D("hALCTgetBX2DMeans","ALCT position in ALCT-L1A match window [BX]",36,0.5,36.5,20,0.5,20.5);
      hALCTgetBX2Denominator = ibooker.book2D("hALCTgetBX2Denominator","Number of ALCT Digis checked",36,0.5,36.5,20,0.5,20.5);
      //      hALCTgetBX2DMeans->setAxisTitle("Chamber #");
      hALCTgetBX2Denominator->setAxisTitle("Chamber #");
      hALCTMatch = ibooker.book1D("hALCTMatch","ALCT position in ALCT-CLCT match window [BX]",7,-0.5,6.5);
      //      hALCTMatchChamberMeans = ibooker.book1D("hALCTMatchChamberMeans","Chamber Mean ALCT position in ALCT-CLCT match window [BX]",60,0,6);
      hALCTMatchSerial = ibooker.book2D("hALCTMatchSerial","ALCT position in ALCT-CLCT match window [BX]",601,-0.5,600.5,7,-0.5,6.5);
      hALCTMatchSerial->setAxisTitle("Chamber Serial Number");
      hALCTMatch2DNumerator = ibooker.book2D("hALCTMatch2DNumerator","ALCT position in ALCT-CLCT match window [BX] (sum)",36,0.5,36.5,20,0.5,20.5);
      //      hALCTMatch2DMeans = ibooker.book2D("hALCTMatch2DMeans","ALCT position in ALCT-CLCT match window [BX]",36,0.5,36.5,20,0.5,20.5);
      hALCTMatch2Denominator = ibooker.book2D("hALCTMatch2Denominator","Number of ALCT-CLCT matches checked",36,0.5,36.5,20,0.5,20.5);
      //      hALCTMatch2DMeans->setAxisTitle("Chamber #");
      hALCTMatch2Denominator->setAxisTitle("Chamber #");
      hCLCTL1A = ibooker.book1D("hCLCTL1A","L1A - CLCTpreTrigger at TMB [BX]",40,149.5,189.5);
      //      hCLCTL1AChamberMeans = ibooker.book1D("hCLCTL1AChamberMeans","Chamber Mean L1A - CLCTpreTrigger at TMB [BX]",90,150,159);
      hCLCTL1ASerial = ibooker.book2D("hCLCTL1ASerial","L1A - CLCTpreTrigger at TMB [BX]",601,-0.5,600.5,40,149.5,189.5);
      hCLCTL1ASerial->setAxisTitle("Chamber Serial Number");
      hCLCTL1A2DNumerator = ibooker.book2D("hCLCTL1A2DNumerator","L1A - CLCTpreTrigger at TMB [BX] (sum)",36,0.5,36.5,20,0.5,20.5);
      //      hCLCTL1A2DMeans = ibooker.book2D("hCLCTL1A2DMeans","L1A - CLCTpreTrigger at TMB [BX]",36,0.5,36.5,20,0.5,20.5);
      hCLCTL1A2Denominator = ibooker.book2D("hCLCTL1A2Denominator","Number of TMB CLCTs checked",36,0.5,36.5,20,0.5,20.5);


      // labels
      applyCSClabels(hOWiresAndCLCT, EXTENDED, Y);
      applyCSClabels(hOWires, EXTENDED, Y);
      applyCSClabels(hOStrips, EXTENDED, Y);
      applyCSClabels(hOStripsAndWiresAndCLCT, EXTENDED, Y);
      applyCSClabels(hORecHits, EXTENDED, Y);
      applyCSClabels(hOSegments, EXTENDED, Y);
      //      applyCSClabels(hSEff, EXTENDED, X);
      //      applyCSClabels(hRHEff, EXTENDED, X);
      //      applyCSClabels(hSEff2, SMALL, Y);
      applyCSClabels(hSSTE2, EXTENDED, Y);
      applyCSClabels(hEffDenominator, EXTENDED, Y);
      //      applyCSClabels(hRHEff2, SMALL, Y);
      applyCSClabels(hRHSTE2, EXTENDED, Y);
      //      applyCSClabels(hStripReadoutEff2, EXTENDED, Y);
      //      applyCSClabels(hStripEff2, SMALL, Y);
      applyCSClabels(hStripSTE2, EXTENDED, Y);
      //      applyCSClabels(hWireEff2, SMALL, Y);
      applyCSClabels(hWireSTE2, EXTENDED, Y);
      applyCSClabels(hSensitiveAreaEvt, EXTENDED, Y);
      //      applyCSClabels(hALCTgetBX2DMeans, EXTENDED, Y);
      applyCSClabels(hALCTgetBX2Denominator, EXTENDED, Y);
      //      applyCSClabels(hALCTMatch2DMeans, EXTENDED, Y);
      applyCSClabels(hALCTMatch2Denominator, EXTENDED, Y);
      //      applyCSClabels(hCLCTL1A2DMeans, EXTENDED, Y);
      applyCSClabels(hCLCTL1A2Denominator,EXTENDED, Y);
}

int CSCOfflineMonitor::chamberSerial ( CSCDetId  id )

private

Definition at line 1884 of file CSCOfflineMonitor.cc.

References RecoEcal_EventContent_cff::ec.

                                                  {
  int st = id.station();
  int ri = id.ring();
  int ch = id.chamber();
  int ec = id.endcap();
  int kSerial = ch;
  if (st == 1 && ri == 1) kSerial = ch;
  if (st == 1 && ri == 2) kSerial = ch + 36;
  if (st == 1 && ri == 3) kSerial = ch + 72;
  if (st == 1 && ri == 4) kSerial = ch;
  if (st == 2 && ri == 1) kSerial = ch + 108;
  if (st == 2 && ri == 2) kSerial = ch + 126;
  if (st == 3 && ri == 1) kSerial = ch + 162;
  if (st == 3 && ri == 2) kSerial = ch + 180;
  if (st == 4 && ri == 1) kSerial = ch + 216;
  if (st == 4 && ri == 2) kSerial = ch + 234;  // from 2014
  if (ec == 2) kSerial = kSerial + 300;
  return kSerial;
}

void CSCOfflineMonitor::doBXMonitor ( edm::Handle< CSCALCTDigiCollection >  alcts, edm::Handle< CSCCLCTDigiCollection >  clcts, const edm::Event &  event, const edm::EventSetup &  eventSetup  )

private

uncomment this for regional unpacking if (id!=SOME_ID) continue;

Take a reference to this FED's data

if fed has data then unpack it

get a pointer to data and pass it to constructor for unpacking

get a reference to dduData

set default detid to that for E=+z, S=1, R=1, C=1, L=1

skip the DDU if its data has serious errors define a mask for serious errors

get a reference to chamber data

first process chamber-wide digis such as LCT

default value for all digis not related to cfebs

layer=0 flags entire chamber

check alct data integrity

check tmb data integrity

Definition at line 1547 of file CSCOfflineMonitor.cc.

References CSCTMBHeader::ALCTMatchTime(), CSCTMBHeader::BXNCount(), CSCDetId::chamber(), trackerTree::check(), CSCDCCExaminer::check(), CSCDCCExaminer::crcALCT(), CSCDCCExaminer::crcCFEB(), CSCDCCExaminer::crcTMB(), FEDRawData::data(), data, CSCDCCEventData::dduData(), CSCCrateMap::detId(), CSCDetId::endcap(), CSCDCCExaminer::errors(), FEDRawDataCollection::FEDData(), edm::EventSetup::get(), edm::Event::getByToken(), mps_fire::i, hcalTTPDigis_cfi::id, LogTrace, FEDNumbering::MAXCSCDDUFEDID, FEDNumbering::MAXCSCFEDID, FEDNumbering::MINCSCDDUFEDID, FEDNumbering::MINCSCFEDID, NULL, edm::ESHandle< T >::product(), matplotRender::rawdata, DetId::rawId(), CSCDetId::ring(), CSCDCCExaminer::setMask(), FEDRawData::size(), and CSCDetId::station().

                                                           {

  // Loop over ALCTDigis

  for (CSCALCTDigiCollection::DigiRangeIterator j=alcts->begin(); j!=alcts->end(); j++) {
    const CSCDetId& idALCT = (*j).first;
    const CSCALCTDigiCollection::Range& range =(*j).second;
    for (CSCALCTDigiCollection::const_iterator digiIt = range.first; digiIt!=range.second; ++digiIt){
      // Valid digi in the chamber (or in neighbouring chamber)  
      if((*digiIt).isValid()){
    hALCTgetBX->Fill((*digiIt).getBX());
    hALCTgetBXSerial->Fill(chamberSerial(idALCT),(*digiIt).getBX());
    hALCTgetBX2DNumerator->Fill(idALCT.chamber(),typeIndex(idALCT,2),(*digiIt).getBX());
    hALCTgetBX2Denominator->Fill(idALCT.chamber(),typeIndex(idALCT,2));
      }
    }
  }// end ALCT Digi loop


  // Loop over raw data to get TMBHeader information
  // Taking code from EventFilter/CSCRawToDigis/CSCDCCUnpacker.cc
  edm::ESHandle<CSCCrateMap> hcrate;
  eventSetup.get<CSCCrateMapRcd>().get(hcrate); 
  const CSCCrateMap* pcrate = hcrate.product();


  // Try to get raw data
  edm::Handle<FEDRawDataCollection> rawdata;
  if ( !( event.getByToken( rd_token, rawdata ) ) ){
    edm::LogWarning("CSCOfflineMonitor") << " FEDRawDataCollection not available";
    return;
  }



  bool goodEvent = false;
  unsigned long dccBinCheckMask = 0x06080016;
  unsigned int examinerMask = 0x1FEBF3F6;
  unsigned int errorMask = 0x0;

  // For new CSC readout layout, which doesn't include DCCs need to loop over DDU FED IDs. 
  // DCC IDs are included for backward compatibility with old data
  std::vector<unsigned int> cscFEDids;

  for (unsigned int id=FEDNumbering::MINCSCFEDID;
       id<=FEDNumbering::MAXCSCFEDID; ++id)   // loop over DCCs
    {
      cscFEDids.push_back(id);
    }

  for (unsigned int id=FEDNumbering::MINCSCDDUFEDID;
       id<=FEDNumbering::MAXCSCDDUFEDID; ++id)   // loop over DDUs
    {
      cscFEDids.push_back(id);
    }

  for (unsigned int i=0; i<cscFEDids.size(); i++)   // loop over all CSC FEDs (DCCs and DDUs)
    {
      unsigned int id = cscFEDids[i];
      bool isDDU_FED = ((id >= FEDNumbering::MINCSCDDUFEDID) && (id <= FEDNumbering::MAXCSCDDUFEDID))?true:false;


    const FEDRawData& fedData = rawdata->FEDData(id);
    unsigned long length =  fedData.size();

    if (length>=32){ 
      CSCDCCExaminer* examiner = NULL;
      std::stringstream examiner_out, examiner_err;
      goodEvent = true;
      examiner = new CSCDCCExaminer();
      if( examinerMask&0x40000 ) examiner->crcCFEB(1);
      if( examinerMask&0x8000  ) examiner->crcTMB (1);
      if( examinerMask&0x0400  ) examiner->crcALCT(1);
      examiner->setMask(examinerMask);
      const short unsigned int *data = (short unsigned int *)fedData.data();

      int res = examiner->check(data,long(fedData.size()/2));
      if( res < 0 )   {
    goodEvent=false;
      } 
      else {    
    goodEvent=!(examiner->errors()&dccBinCheckMask);
      }


      if (goodEvent) {

    CSCDCCExaminer * ptrExaminer = examiner;

        std::vector<CSCDDUEventData> fed_Data;
        std::vector<CSCDDUEventData>* ptr_fedData = &fed_Data;


        if (isDDU_FED) // Use new DDU FED readout mode
          {

            CSCDDUEventData single_dduData((short unsigned int *) fedData.data(), ptrExaminer);
            fed_Data.push_back(single_dduData);

          }
        else  // Use old DCC FED readout mode
          {
            CSCDCCEventData dccData((short unsigned int *) fedData.data(), ptrExaminer);
            fed_Data = dccData.dduData();
          }

        const std::vector<CSCDDUEventData> & dduData = *ptr_fedData;

        CSCDetId layer(1, 1, 1, 1, 1);
        for (unsigned int iDDU=0; iDDU<dduData.size(); ++iDDU) {  // loop over DDUs
      if (dduData[iDDU].trailer().errorstat()&errorMask) {
        LogTrace("CSCDCCUnpacker|CSCRawToDigi") << "DDU# " << iDDU << " has serious error - no digis unpacked! " <<
          std::hex << dduData[iDDU].trailer().errorstat();
        continue; // to next iteration of DDU loop
      }

      const std::vector<CSCEventData> & cscData = dduData[iDDU].cscData();


      for (unsigned int iCSC=0; iCSC<cscData.size(); ++iCSC) { // loop over CSCs

        int vmecrate = cscData[iCSC].dmbHeader()->crateID();
        int dmb = cscData[iCSC].dmbHeader()->dmbID();

        int icfeb = 0;  
        int ilayer = 0; 

             if ((vmecrate>=1)&&(vmecrate<=60) && (dmb>=1)&&(dmb<=10)&&(dmb!=6)) {
               layer = pcrate->detId(vmecrate, dmb,icfeb,ilayer );
             } 
             else{
               LogTrace ("CSCOfflineMonitor") << " detID input out of range!!! ";
               LogTrace ("CSCOfflineMonitor")
                 << " skipping chamber vme= " << vmecrate << " dmb= " << dmb;
               continue; // to next iteration of iCSC loop
             }


        int nalct = cscData[iCSC].dmbHeader()->nalct();
        bool goodALCT=false;
        //if (nalct&&(cscData[iCSC].dataPresent>>6&0x1)==1) {
        if (nalct&&cscData[iCSC].alctHeader()) {  
          if (cscData[iCSC].alctHeader()->check()){
        goodALCT=true;
          }
        }

        int nclct = cscData[iCSC].dmbHeader()->nclct();
        bool goodTMB=false;
        if (nclct&&cscData[iCSC].tmbData()) {
          if (cscData[iCSC].tmbHeader()->check()){
        if (cscData[iCSC].clctData()->check()) goodTMB=true; 
          }
        }

        if (goodTMB && goodALCT) { 
          const CSCTMBHeader *tmbHead = cscData[iCSC].tmbHeader();
          std::vector<CSCCLCTDigi> clcts = cscData[iCSC].tmbHeader()->CLCTDigis(layer.rawId());
          if (clcts.size()==0 || !(clcts[0].isValid()))
        continue;
          // Check if the CLCT was in ME11a (ring 4)
          if(layer.station()==1 && layer.ring() ==1 && clcts[0].getKeyStrip()>128){
        layer = CSCDetId(layer.endcap(),layer.station(),4, layer.chamber()); 
          }
          hALCTMatch->Fill(tmbHead->ALCTMatchTime());
          hALCTMatchSerial->Fill(chamberSerial(layer),tmbHead->ALCTMatchTime());
          // Only fill big 2D display if ALCTMatchTime !=6, since this bin is polluted by the CLCT only triggers
          // One will have to look at the serial plots to see if the are a lot of entries here
          if(tmbHead->ALCTMatchTime()!=6){
        hALCTMatch2DNumerator->Fill(layer.chamber(),typeIndex(layer,2),tmbHead->ALCTMatchTime());
        hALCTMatch2Denominator->Fill(layer.chamber(),typeIndex(layer,2));         
          }

          int TMB_CLCTpre_rel_L1A = tmbHead->BXNCount()-clcts[0].getFullBX();
          if (TMB_CLCTpre_rel_L1A > 3563)
        TMB_CLCTpre_rel_L1A = TMB_CLCTpre_rel_L1A - 3564;
          if (TMB_CLCTpre_rel_L1A < 0)
        TMB_CLCTpre_rel_L1A = TMB_CLCTpre_rel_L1A + 3564;

          hCLCTL1A->Fill(TMB_CLCTpre_rel_L1A);
          hCLCTL1ASerial->Fill(chamberSerial(layer),TMB_CLCTpre_rel_L1A);
          hCLCTL1A2DNumerator->Fill(layer.chamber(),typeIndex(layer,2),TMB_CLCTpre_rel_L1A);
          hCLCTL1A2Denominator->Fill(layer.chamber(),typeIndex(layer,2));         

        }// end if goodTMB and goodALCT
      }// end loop CSCData
    }// end loop DDU
      }// end if good event
      if (examiner!=NULL) delete examiner;
    }// end if non-zero fed data
  }// end DCC loop for NON-REFERENCE

  return;

}

void CSCOfflineMonitor::doEfficiencies ( edm::Handle< CSCWireDigiCollection >  wires, edm::Handle< CSCStripDigiCollection >  strips, edm::Handle< CSCRecHit2DCollection >  recHits, edm::Handle< CSCSegmentCollection >  cscSegments, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Definition at line 1246 of file CSCOfflineMonitor.cc.

References stringResolutionProvider_cfi::bin, CSCDetId::chamber(), CSCGeometry::chamber(), CSCGeometry::chambers(), CSCChamberSpecs::chamberTypeName(), mps_update::diff, CSCDetId::endcap(), plotBeamSpotDB::first, objects.autophobj::float, CSCLayer::geometry(), CSCChamber::id(), createfilelist::int, CSCChamber::layer(), CSCDetId::layer(), CSCSegment::localDirection(), CSCSegment::localPosition(), TrapezoidalPlaneBounds::parameters(), CSCDetId::ring(), CSCChamber::specs(), CSCDetId::station(), electronIdCutBased_cfi::threshold, GeomDet::toGlobal(), GeomDet::toLocal(), mps_merge::weight, PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                                                        {

  bool allWires[2][4][4][36][6];
  bool allStrips[2][4][4][36][6];
  bool AllRecHits[2][4][4][36][6];
  bool AllSegments[2][4][4][36];

  //bool MultiSegments[2][4][4][36];
  for(int iE = 0;iE<2;iE++){
    for(int iS = 0;iS<4;iS++){
      for(int iR = 0; iR<4;iR++){
        for(int iC =0;iC<36;iC++){
          AllSegments[iE][iS][iR][iC] = false;
          //MultiSegments[iE][iS][iR][iC] = false;
          for(int iL=0;iL<6;iL++){
        allWires[iE][iS][iR][iC][iL] = false;
        allStrips[iE][iS][iR][iC][iL] = false;
            AllRecHits[iE][iS][iR][iC][iL] = false;
          }
        }
      }
    }
  }


  // Wires
  for (CSCWireDigiCollection::DigiRangeIterator dWDiter=wires->begin(); dWDiter!=wires->end(); dWDiter++) {
    CSCDetId idrec = (CSCDetId)(*dWDiter).first;
    std::vector<CSCWireDigi>::const_iterator wireIter = (*dWDiter).second.first;
    std::vector<CSCWireDigi>::const_iterator lWire = (*dWDiter).second.second;
    for( ; wireIter != lWire; ++wireIter) {
      allWires[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber() -1][idrec.layer() -1] = true;
      break;
    }
  }

  //---- STRIPS
  for (CSCStripDigiCollection::DigiRangeIterator dSDiter=strips->begin(); dSDiter!=strips->end(); dSDiter++) {
    CSCDetId idrec = (CSCDetId)(*dSDiter).first;
    std::vector<CSCStripDigi>::const_iterator stripIter = (*dSDiter).second.first;
    std::vector<CSCStripDigi>::const_iterator lStrip = (*dSDiter).second.second;
    for( ; stripIter != lStrip; ++stripIter) {
      std::vector<int> myADCVals = stripIter->getADCCounts();
      bool thisStripFired = false;
      float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float threshold = 13.3 ;
      float diff = 0.;
      for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
        diff = (float)myADCVals[iCount]-thisPedestal;
        if (diff > threshold) {
          thisStripFired = true;
      break;
        }
      }
      if(thisStripFired){
    allStrips[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber() -1][idrec.layer() -1] = true;
    break;
      }
    }
  }

  // Rechits
  for (CSCRecHit2DCollection::const_iterator recEffIt = recHits->begin(); recEffIt != recHits->end(); recEffIt++) {
    //CSCDetId idrec = (CSCDetId)(*recIt).cscDetId();
    CSCDetId  idrec = (CSCDetId)(*recEffIt).cscDetId();
    AllRecHits[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber() -1][idrec.layer() -1] = true;

  }

  std::vector <uint> seg_ME2(2,0) ;
  std::vector <uint> seg_ME3(2,0) ;
  std::vector < pair <CSCDetId, CSCSegment> > theSegments(4);
  // Segments
  for(CSCSegmentCollection::const_iterator segEffIt=cscSegments->begin(); segEffIt != cscSegments->end(); segEffIt++) {
    CSCDetId idseg  = (CSCDetId)(*segEffIt).cscDetId();
    //if(AllSegments[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber()]){
    //MultiSegments[idrec.endcap() -1][idrec.station() -1][idrec.ring() -1][idrec.chamber()] = true;
    //}
    AllSegments[idseg.endcap() -1][idseg.station() -1][idseg.ring() -1][idseg.chamber() -1] = true;
    // "Intrinsic" efficiency measurement relies on "good" segment extrapolation - we need the pre-selection below
    // station 2 "good" segment will be used for testing efficiencies in ME1 and ME3
    // station 3 "good" segment will be used for testing efficiencies in ME2 and ME4
    if(2==idseg.station() || 3==idseg.station()){
      uint seg_tmp ; 
      if(2==idseg.station()){
    ++seg_ME2[idseg.endcap() -1];
    seg_tmp = seg_ME2[idseg.endcap() -1];
      }
      else{
    ++seg_ME3[idseg.endcap() -1];
    seg_tmp = seg_ME3[idseg.endcap() -1];
      }
      // is the segment good
      if(1== seg_tmp&& 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
    pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
    theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
      }
    }
    /*
    if(2==idseg.station()){
    ++seg_ME2[idseg.endcap() -1];
       if(1==seg_ME2[idseg.endcap() -1] && 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
           pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
           theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
       }
    }
    else if(3==idseg.station()){
    ++seg_ME3[idseg.endcap() -1];
    if(1==seg_ME3[idseg.endcap() -1] && 6==(*segEffIt).nRecHits() && (*segEffIt).chi2()/(*segEffIt).degreesOfFreedom()<3.){
         pair <CSCDetId, CSCSegment> specSeg = make_pair( (CSCDetId)(*segEffIt).cscDetId(),*segEffIt);
     theSegments[2*(idseg.endcap()-1)+(idseg.station() -2)] = specSeg;
       }
    }
    */

  }
  // Simple efficiency calculations
  for(int iE = 0;iE<2;iE++){
    for(int iS = 0;iS<4;iS++){
      for(int iR = 0; iR<4;iR++){
        for(int iC =0;iC<36;iC++){
          int NumberOfLayers = 0;
          for(int iL=0;iL<6;iL++){
            if(AllRecHits[iE][iS][iR][iC][iL]){
              NumberOfLayers++;
            }
          }
          int bin = 0;
          if (iS==0) bin = iR+1+(iE*10);
          else bin = (iS+1)*2 + (iR+1) + (iE*10);
          if(NumberOfLayers>1){
            //if(!(MultiSegments[iE][iS][iR][iC])){
            if(AllSegments[iE][iS][iR][iC]){
              //---- Efficient segment evenents
              hSnum->Fill(bin);
            }
            //---- All segment events (normalization)
            hSden->Fill(bin);
            //}
          }
          if(AllSegments[iE][iS][iR][iC]){
            if(NumberOfLayers==6){
              //---- Efficient rechit events
              hRHnum->Fill(bin);;
            }
            //---- All rechit events (normalization)
            hRHden->Fill(bin);;
          }
        }
      }
    }
  }

  // pick a segment only if there are no others in the station
  std::vector < pair <CSCDetId, CSCSegment> * > theSeg;
  if(1==seg_ME2[0]) theSeg.push_back(&theSegments[0]);
  if(1==seg_ME3[0]) theSeg.push_back(&theSegments[1]);
  if(1==seg_ME2[1]) theSeg.push_back(&theSegments[2]);
  if(1==seg_ME3[1]) theSeg.push_back(&theSegments[3]);

  // Needed for plots
  // at the end the chamber types will be numbered as 1 to 20
  // (ME-4./2, ME-4/1, -ME3/2, -ME3/1, ..., +ME3/1, +ME3/2, ME+4/1, ME+4/2) 
  std::map <std::string, float> chamberTypes;
  chamberTypes["ME1/a"] = 0.5;
  chamberTypes["ME1/b"] = 1.5;
  chamberTypes["ME1/2"] = 2.5;
  chamberTypes["ME1/3"] = 3.5;
  chamberTypes["ME2/1"] = 4.5;
  chamberTypes["ME2/2"] = 5.5;
  chamberTypes["ME3/1"] = 6.5;
  chamberTypes["ME3/2"] = 7.5;
  chamberTypes["ME4/1"] = 8.5;
  chamberTypes["ME4/2"] = 9.5;

  if(theSeg.size()){
    std::map <int , GlobalPoint> extrapolatedPoint;
    std::map <int , GlobalPoint>::iterator it;
    const CSCGeometry::ChamberContainer& ChamberContainer = cscGeom->chambers();
    // Pick which chamber with which segment to test
    for(unsigned int nCh=0;nCh<ChamberContainer.size();nCh++){
      const CSCChamber *cscchamber = ChamberContainer[nCh];
      pair <CSCDetId, CSCSegment> * thisSegment = 0;
      for(uint iSeg =0;iSeg<theSeg.size();++iSeg ){
        if(cscchamber->id().endcap() == theSeg[iSeg]->first.endcap()){ 
          if(1==cscchamber->id().station() || 3==cscchamber->id().station() ){
        if(2==theSeg[iSeg]->first.station()){
          thisSegment = theSeg[iSeg];
        }
      }
      else if (2==cscchamber->id().station() || 4==cscchamber->id().station()){
        if(3==theSeg[iSeg]->first.station()){
          thisSegment = theSeg[iSeg];
        }
      }
    }
      }
      // this chamber is to be tested with thisSegment
      if(thisSegment){
    CSCSegment * seg = &(thisSegment->second);
    const CSCChamber *segChamber = cscGeom->chamber(thisSegment->first);
    LocalPoint localCenter(0.,0.,0);
    GlobalPoint cscchamberCenter =  cscchamber->toGlobal(localCenter);
    // try to save some time (extrapolate a segment to a certain position only once)
    it = extrapolatedPoint.find(int(cscchamberCenter.z()));
    if(it==extrapolatedPoint.end()){
      GlobalPoint segPos = segChamber->toGlobal(seg->localPosition());
      GlobalVector segDir = segChamber->toGlobal(seg->localDirection());
      double paramaterLine = lineParametrization(segPos.z(),cscchamberCenter.z() , segDir.z());
      double xExtrapolated = extrapolate1D(segPos.x(),segDir.x(), paramaterLine);
      double yExtrapolated = extrapolate1D(segPos.y(),segDir.y(), paramaterLine);
      GlobalPoint globP (xExtrapolated, yExtrapolated, cscchamberCenter.z());
      extrapolatedPoint[int(cscchamberCenter.z())] = globP;
    }
    // Where does the extrapolated point lie in the (tested) chamber local frame? Here: 
    LocalPoint extrapolatedPointLocal = cscchamber->toLocal(extrapolatedPoint[int(cscchamberCenter.z())]);
    const CSCLayer *layer_p = cscchamber->layer(1);//layer 1
    const CSCLayerGeometry *layerGeom = layer_p->geometry ();
    const std::array<const float, 4> & layerBounds = layerGeom->parameters ();
    float shiftFromEdge = 15.;//cm
    float shiftFromDeadZone = 10.;
    // is the extrapolated point within a sensitive region
    bool pass = withinSensitiveRegion(extrapolatedPointLocal, layerBounds, 
                      cscchamber->id().station(), cscchamber->id().ring(), 
                      shiftFromEdge, shiftFromDeadZone);
    if(pass){// the extrapolation point of the segment lies within sensitive region of that chamber
      // how many rechit layers are there in the chamber?
      // 0 - maybe the muon died or is deflected at large angle? do not use that case
      // 1 - could be noise...
      // 2 or more - this is promissing; this is our definition of a reliable signal; use it below
      // is other definition better? 
      int nRHLayers = 0;
      for(int iL =0;iL<6;++iL){
        if(AllRecHits[cscchamber->id().endcap()-1]
           [cscchamber->id().station()-1]
           [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
          ++nRHLayers;
        }
      }
      //std::cout<<" nRHLayers = "<<nRHLayers<<std::endl;
      float verticalScale = chamberTypes[cscchamber->specs()->chamberTypeName()];
      if(cscchamberCenter.z()<0){
        verticalScale = - verticalScale;
      } 
      verticalScale += 10.5;
      hSensitiveAreaEvt->Fill(float(cscchamber->id().chamber()),verticalScale);
      if(nRHLayers>1){// this chamber contains a reliable signal
        //chamberTypes[cscchamber->specs()->chamberTypeName()];
        // "intrinsic" efficiencies
        //std::cout<<" verticalScale = "<<verticalScale<<" chType = "<<cscchamber->specs()->chamberTypeName()<<std::endl;
        // this is the denominator forr all efficiencies
        hEffDenominator->Fill(float(cscchamber->id().chamber()),verticalScale);
        // Segment efficiency
        if(AllSegments[cscchamber->id().endcap()-1]
           [cscchamber->id().station()-1]
           [cscchamber->id().ring()-1][cscchamber->id().chamber()-1]){
          hSSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale));
        }

        for(int iL =0;iL<6;++iL){
          float weight = 1./6.;
          // one shold account for the weight in the efficiency...
          // Rechit efficiency
          if(AllRecHits[cscchamber->id().endcap()-1]
         [cscchamber->id().station()-1]
         [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
        hRHSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale),weight);
          }
          // Wire efficiency
          if(allWires[cscchamber->id().endcap()-1]
         [cscchamber->id().station()-1]
         [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
        // one shold account for the weight in the efficiency...
        hWireSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale),weight);
          }
          // Strip efficiency
          if(allStrips[cscchamber->id().endcap()-1]
         [cscchamber->id().station()-1]
         [cscchamber->id().ring()-1][cscchamber->id().chamber()-1][iL]){
        // one shold account for the weight in the efficiency...
        hStripSTE2->Fill(float(cscchamber->id().chamber()),float(verticalScale),weight);
          }
        }
      }
    }
      }
    }
  }
  //


}

void CSCOfflineMonitor::doOccupancies ( edm::Handle< CSCStripDigiCollection >  strips, edm::Handle< CSCWireDigiCollection >  wires, edm::Handle< CSCRecHit2DCollection >  recHits, edm::Handle< CSCSegmentCollection >  cscSegments, edm::Handle< CSCCLCTDigiCollection >  clcts  )

private

Definition at line 604 of file CSCOfflineMonitor.cc.

References EnergyCorrector::c, CSCDetId::chamber(), mps_update::diff, MillePedeFileConverter_cfg::e, CSCDetId::endcap(), objects.autophobj::float, alignCSCRings::r, CSCDetId::ring(), alignCSCRings::s, CSCDetId::station(), and electronIdCutBased_cfi::threshold.

                                                             {

  bool clcto[2][4][4][36];
  bool wireo[2][4][4][36];
  bool stripo[2][4][4][36];
  bool rechito[2][4][4][36];
  bool segmento[2][4][4][36];

  bool hasWires = false;
  bool hasStrips = false;
  bool hasRecHits = false;
  bool hasSegments = false;

  for (int e = 0; e < 2; e++){
    for (int s = 0; s < 4; s++){
      for (int r = 0; r < 4; r++){
        for (int c = 0; c < 36; c++){
          clcto[e][s][r][c] = false;
          wireo[e][s][r][c] = false;
          stripo[e][s][r][c] = false;
          rechito[e][s][r][c] = false;
          segmento[e][s][r][c] = false;
        }
      }
    }
  }

  //clcts
  for (CSCCLCTDigiCollection::DigiRangeIterator j=clcts->begin(); j!=clcts->end(); j++) {
    CSCDetId id = (CSCDetId)(*j).first;
    int kEndcap  = id.endcap();
    int kRing    = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    const CSCCLCTDigiCollection::Range& range =(*j).second;
    for (CSCCLCTDigiCollection::const_iterator digiIt = range.first; digiIt!=range.second; ++digiIt){
      // Valid digi in the chamber (or in neighbouring chamber) 
      if((*digiIt).isValid()){
      //Check whether this CLCT came from ME11a
    if( kStation ==1 && kRing==1 && (*digiIt).getKeyStrip()>128)
      kRing = 4;
    clcto[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
      }
    }
  }

  //wires
  for (CSCWireDigiCollection::DigiRangeIterator wi=wires->begin(); wi!=wires->end(); wi++) {
    CSCDetId id = (CSCDetId)(*wi).first;
    int kEndcap  = id.endcap();
    int kRing    = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    std::vector<CSCWireDigi>::const_iterator wireIt = (*wi).second.first;
    std::vector<CSCWireDigi>::const_iterator lastWire = (*wi).second.second;
    for( ; wireIt != lastWire; ++wireIt){
      if (!wireo[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
        wireo[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
        hOWires->Fill(kChamber,typeIndex(id,2));
        hOWireSerial->Fill(chamberSerial(id));
        hasWires = true;
    if( clcto[kEndcap-1][kStation-1][kRing-1][kChamber-1])
      hOWiresAndCLCT->Fill(kChamber,typeIndex(id,2));
    //Also check for a CLCT in ME11a if you're in ME11 already
    if (kStation==1 && kRing==1 && clcto[kEndcap-1][kStation-1][3][kChamber-1]){
      CSCDetId idME11a = CSCDetId(kEndcap, kStation, 4, kChamber);
      hOWiresAndCLCT->Fill(kChamber,typeIndex(idME11a,2));
    } 
      }
    }//end for loop
  }

  //strips
  for (CSCStripDigiCollection::DigiRangeIterator si=strips->begin(); si!=strips->end(); si++) {
    CSCDetId id = (CSCDetId)(*si).first;
    int kEndcap  = id.endcap();
    int kRing    = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    std::vector<CSCStripDigi>::const_iterator stripIt = (*si).second.first;
    std::vector<CSCStripDigi>::const_iterator lastStrip = (*si).second.second;
    for( ; stripIt != lastStrip; ++stripIt) {
      std::vector<int> myADCVals = stripIt->getADCCounts();
      bool thisStripFired = false;
      float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float threshold = 13.3 ;
      float diff = 0.;
      for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
        diff = (float)myADCVals[iCount]-thisPedestal;
        if (diff > threshold) { thisStripFired = true; }
      }
      if (thisStripFired) {
        if (!stripo[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
          stripo[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
          hOStrips->Fill(kChamber,typeIndex(id,2));
          hOStripSerial->Fill(chamberSerial(id));
          hasStrips = true;
      if (clcto[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
        // check if there is a wire digi in this chamber too
        // for ME 1/4 check for a wire in ME 1/1
        if(wireo[kEndcap-1][kStation-1][kRing-1][kChamber-1] || (kRing==4 && wireo[kEndcap-1][kStation-1][0][kChamber-1]) ){
          hOStripsAndWiresAndCLCT->Fill(kChamber,typeIndex(id,2));
        }
      }//end clct and wire digi check
        }
      }//end if (thisStripFired)
    }
  }

  //rechits
  CSCRecHit2DCollection::const_iterator recIt;
  for (recIt = recHits->begin(); recIt != recHits->end(); recIt++) {
    CSCDetId idrec = (CSCDetId)(*recIt).cscDetId();
    int kEndcap  = idrec.endcap();
    int kRing    = idrec.ring();
    int kStation = idrec.station();
    int kChamber = idrec.chamber();
    if (!rechito[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
      rechito[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
      hORecHitsSerial->Fill(chamberSerial(idrec));
      hORecHits->Fill(kChamber,typeIndex(idrec,2));
      hasRecHits = true;
    }
  }

  //segments
  for(CSCSegmentCollection::const_iterator segIt=cscSegments->begin(); segIt != cscSegments->end(); segIt++) {
    CSCDetId id  = (CSCDetId)(*segIt).cscDetId();
    int kEndcap  = id.endcap();
    int kRing    = id.ring();
    int kStation = id.station();
    int kChamber = id.chamber();
    if (!segmento[kEndcap-1][kStation-1][kRing-1][kChamber-1]){
      segmento[kEndcap-1][kStation-1][kRing-1][kChamber-1] = true;
      hOSegmentsSerial->Fill(chamberSerial(id));
      hOSegments->Fill(kChamber,typeIndex(id,2));
      hasSegments = true;
    }
  }

  //Overall CSC Occupancy
  hCSCOccupancy->Fill(1);
  if (hasWires) hCSCOccupancy->Fill(3);
  if (hasStrips) hCSCOccupancy->Fill(5);
  if (hasWires && hasStrips) hCSCOccupancy->Fill(7);
  if (hasRecHits) hCSCOccupancy->Fill(9);
  if (hasSegments) hCSCOccupancy->Fill(11);


  }

void CSCOfflineMonitor::doPedestalNoise ( edm::Handle< CSCStripDigiCollection >  strips, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Definition at line 835 of file CSCOfflineMonitor.cc.

References objects.autophobj::float, CSCGeometry::gangedStrips(), CSCDetId::station(), and electronIdCutBased_cfi::threshold.

                                                       {

  for (CSCStripDigiCollection::DigiRangeIterator dPNiter=strips->begin(); dPNiter!=strips->end(); dPNiter++) {
    CSCDetId id = (CSCDetId)(*dPNiter).first;
    int kStation = id.station();
    int kRing = id.ring();
    std::vector<CSCStripDigi>::const_iterator pedIt = (*dPNiter).second.first;
    std::vector<CSCStripDigi>::const_iterator lStrip = (*dPNiter).second.second;
    for( ; pedIt != lStrip; ++pedIt) {
      int myStrip = pedIt->getStrip();
      std::vector<int> myADCVals = pedIt->getADCCounts();
      float TotalADC = getSignal(*strips, id, myStrip);
      bool thisStripFired = false;
      float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float thisSignal = (1./6)*(myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
      float threshold = 13.3;

      // Why is this code block even here? Doesn't use myStrip after setting it (converts channel to strip
      // for ganged ME11A
      if( (kStation == 1 && kRing == 4) && cscGeom->gangedStrips() ) 
    {
      kRing = 1;
      if(myStrip <= 16) myStrip += 64; // no trapping for any bizarreness
    }

      if (TotalADC > threshold) { thisStripFired = true;}
      if (!thisStripFired){
    float ADC = thisSignal - thisPedestal;
        hStripPed[typeIndex(id)-1]->Fill(ADC);
      }
    }
  }

}

void CSCOfflineMonitor::doRecHits ( edm::Handle< CSCRecHit2DCollection >  recHits, edm::Handle< CSCStripDigiCollection >  strips, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Find the charge associated with this hit

Definition at line 878 of file CSCOfflineMonitor.cc.

References CSCDetId::endcap(), mps_fire::i, CSCGeometry::layer(), CSCDetId::station(), GeomDet::toGlobal(), PV3DBase< T, PVType, FrameType >::x(), and PV3DBase< T, PVType, FrameType >::y().

                                                                   {

  // Get the RecHits collection :
  int nRecHits = recHits->size();

  // ---------------------
  // Loop over rechits 
  // ---------------------
  // Build iterator for rechits and loop :
  CSCRecHit2DCollection::const_iterator dRHIter;
  for (dRHIter = recHits->begin(); dRHIter != recHits->end(); dRHIter++) {

    // Find chamber with rechits in CSC 
    CSCDetId idrec = (CSCDetId)(*dRHIter).cscDetId();

    // Store rechit as a Local Point:
    LocalPoint rhitlocal = (*dRHIter).localPosition();  
    //float xreco = rhitlocal.x();
    //float yreco = rhitlocal.y();

    // Get the reconstucted strip position and error
    float stpos = (*dRHIter).positionWithinStrip();
    float sterr = (*dRHIter).errorWithinStrip();


    int adcsize = dRHIter->nStrips()*dRHIter->nTimeBins();
    float rHSumQ = 0;
    float sumsides = 0;
    for (unsigned int i = 0; i < dRHIter->nStrips(); i++){
      for (unsigned int j=0; j<dRHIter->nTimeBins()-1; j++) {
    rHSumQ+=dRHIter->adcs(i,j);
        if ( i != 1 ) sumsides += dRHIter->adcs(i,j); // skip central strip
      }
    }   

    float rHratioQ = sumsides/rHSumQ;
    if (adcsize != 12) rHratioQ = -99;

    // Get the signal timing of this hit
    float rHtime = (*dRHIter).tpeak(); //calculated from cathode SCA bins
    float rHtimeAnode = (*dRHIter).wireTime(); // calculated from anode wire bx

    // Get pointer to the layer:
    const CSCLayer* csclayer = cscGeom->layer( idrec );

    // Transform hit position from local chamber geometry to global CMS geom
    GlobalPoint rhitglobal= csclayer->toGlobal(rhitlocal);
    float grecx   =  rhitglobal.x();
    float grecy   =  rhitglobal.y();

    // Fill some histograms
    int sIndex = idrec.station() + ((idrec.endcap()-1) * 4);
    int tIndex = typeIndex(idrec);
    hRHSumQ[tIndex-1]->Fill(rHSumQ);
    hRHRatioQ[tIndex-1]->Fill(rHratioQ);
    hRHstpos[tIndex-1]->Fill(stpos);
    hRHsterr[tIndex-1]->Fill(sterr);
    hRHTiming[tIndex-1]->Fill(rHtime);
    hRHTimingAnode[tIndex-1]->Fill(rHtimeAnode);
    hRHGlobal[sIndex-1]->Fill(grecx,grecy);

  } //end rechit loop

  //  if (nRecHits == 0) nRecHits = -1; // I see no point in doing this
  hRHnrechits->Fill(nRecHits);

}

void CSCOfflineMonitor::doResolution ( edm::Handle< CSCSegmentCollection >  cscSegments, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Find the strip containing this hit

Definition at line 1078 of file CSCOfflineMonitor.cc.

References kLayer(), CSCDetId::layer(), CSCDetId::ring(), and CSCDetId::station().

                                                                      {

  for(CSCSegmentCollection::const_iterator dSiter=cscSegments->begin(); dSiter != cscSegments->end(); dSiter++) {
    CSCDetId id  = (CSCDetId)(*dSiter).cscDetId();
    //
    // try to get the CSC recHits that contribute to this segment.
    std::vector<CSCRecHit2D> theseRecHits = (*dSiter).specificRecHits();
    int nRH = (*dSiter).nRecHits();
    int jRH = 0;
    CLHEP::HepMatrix sp(6,1);
    CLHEP::HepMatrix se(6,1);
    for ( vector<CSCRecHit2D>::const_iterator iRH = theseRecHits.begin(); iRH != theseRecHits.end(); iRH++) {
      jRH++;
      CSCDetId idRH = (CSCDetId)(*iRH).cscDetId();
      //int kEndcap  = idRH.endcap();
      int kRing    = idRH.ring();
      int kStation = idRH.station();
      //int kChamber = idRH.chamber();
      int kLayer   = idRH.layer();

      int centerid    =  iRH->nStrips()/2 + 1;
      int centerStrip =  iRH->channels(centerid - 1);   

      // If this segment has 6 hits, find the position of each hit on the strip in units of stripwidth and store values
      if (nRH == 6){
        float stpos = (*iRH).positionWithinStrip();
        se(kLayer,1) = (*iRH).errorWithinStrip();
        // Take into account half-strip staggering of layers (ME1/1 has no staggering)
        if (kStation == 1 && (kRing == 1 || kRing == 4)) sp(kLayer,1) = stpos + centerStrip;
        else{
          if (kLayer == 1 || kLayer == 3 || kLayer == 5) sp(kLayer,1) = stpos + centerStrip;
          if (kLayer == 2 || kLayer == 4 || kLayer == 6) sp(kLayer,1) = stpos - 0.5 + centerStrip;
        }
      }

    }



    // Fit all points except layer 3, then compare expected value for layer 3 to reconstructed value
    //    float residual = -99.; // used to fill always
    if (nRH == 6){
      float expected = fitX(sp,se);
      float residual = expected - sp(3,1);

      hSResid[typeIndex(id)-1]->Fill(residual); // fill here so stats make sense
    }

    //  hSResid[typeIndex(id)-1]->Fill(residual); // used to fill here but then stats distorted by underflows

  } // end segment loop



}

void CSCOfflineMonitor::doSegments ( edm::Handle< CSCSegmentCollection >  cscSegments, edm::ESHandle< CSCGeometry >  cscGeom  )

private

Definition at line 956 of file CSCOfflineMonitor.cc.

References CSCGeometry::chamber(), ChiSquaredProbability(), mps_fire::i, nhits, PV3DBase< T, PVType, FrameType >::phi(), mathSSE::sqrt(), PV3DBase< T, PVType, FrameType >::theta(), GeomDet::toGlobal(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                                                    {

  // get CSC segment collection
  int nSegments = cscSegments->size();

  for(CSCSegmentCollection::const_iterator dSiter=cscSegments->begin(); dSiter != cscSegments->end(); dSiter++) {
    CSCDetId id  = (CSCDetId)(*dSiter).cscDetId();
    float chisq    = (*dSiter).chi2();
    int nhits      = (*dSiter).nRecHits();
    int nDOF       = 2*nhits-4;
    float nChi2    = chisq/nDOF;
    double chisqProb = ChiSquaredProbability( (double)chisq, nDOF );
    LocalPoint localPos = (*dSiter).localPosition();
    LocalVector segDir = (*dSiter).localDirection();

    // prepare to calculate segment times 
    float timeCathode = 0;  //average from cathode information alone
    float timeAnode = 0;  //average from pruned anode information alone
    float timeCombined = 0; //average from cathode hits and pruned anode list
    std::vector<float> cathodeTimes;
    std::vector<float> anodeTimes;
    // Get the CSC recHits that contribute to this segment.
    std::vector<CSCRecHit2D> theseRecHits = (*dSiter).specificRecHits();
    for ( vector<CSCRecHit2D>::const_iterator iRH = theseRecHits.begin(); iRH != theseRecHits.end(); iRH++) {
      if ( !((*iRH).isValid()) ) continue;  // only interested in valid hits
      cathodeTimes.push_back((*iRH).tpeak());
      anodeTimes.push_back((*iRH).wireTime());
    }//end rechit loop

    // Calculate cathode average
    for (unsigned int i=0; i<cathodeTimes.size(); i++) 
    timeCathode+=cathodeTimes[i]/cathodeTimes.size();

    // Prune the anode list to deal with the late tail 
    float anodeMaxDiff;
    bool modified = false;
    std::vector<float>::iterator anodeMaxHit;
    do {
      if (anodeTimes.size()==0) continue;
      timeAnode=0;
      anodeMaxDiff=0;
      modified=false;

      // Find the average
      for (unsigned int j=0; j<anodeTimes.size(); j++) timeAnode+=anodeTimes[j]/anodeTimes.size();

      // Find the maximum outlier hit
      for (unsigned int j=0; j<anodeTimes.size(); j++) {
    if (fabs(anodeTimes[j]-timeAnode)>anodeMaxDiff) {
      anodeMaxHit=anodeTimes.begin()+j;
      anodeMaxDiff=fabs(anodeTimes[j]-timeAnode);
    }
      }

      // Cut hit if its greater than some time away
      if (anodeMaxDiff>26) {
    modified=true;
    anodeTimes.erase(anodeMaxHit);
      }
    } while (modified);

    // Calculate combined anode and cathode time average
    if(cathodeTimes.size()+anodeTimes.size() >0 )
      timeCombined = (timeCathode*cathodeTimes.size() + timeAnode*anodeTimes.size())/(cathodeTimes.size()+anodeTimes.size());

    // global transformation
    float globX = 0.;
    float globY = 0.;
    float globZ = 0.;
    float globTOF = 0.;
    float globTheta = 0.;
    float globPhi   = 0.;
    const CSCChamber* cscchamber = cscGeom->chamber(id);
    if (cscchamber) {
      GlobalPoint globalPosition = cscchamber->toGlobal(localPos);
      globX = globalPosition.x();
      globY = globalPosition.y();
      globZ = globalPosition.z();
      globTOF = sqrt(globX*globX+globY*globY+globZ*globZ);
      GlobalVector globalDirection = cscchamber->toGlobal(segDir);
      globTheta = globalDirection.theta();
      globPhi   = globalDirection.phi();
    }

    // Fill histos
    int tIndex = typeIndex(id);
    hSnhitsAll->Fill(nhits);
    hSnhits[tIndex-1]->Fill(nhits);
    hSChiSqAll->Fill(nChi2);
    hSChiSq[tIndex-1]->Fill(nChi2);
    hSChiSqProbAll->Fill(chisqProb);
    hSChiSqProb[tIndex-1]->Fill(chisqProb);
    hSGlobalTheta->Fill(globTheta);
    hSGlobalPhi->Fill(globPhi);
    hSTimeDiff->Fill(timeAnode-timeCathode);
        hSTimeDiffByChamberType[tIndex-1]->Fill(timeAnode-timeCathode);
        hSTimeAnode->Fill(timeAnode);
        hSTimeAnodeByChamberType[tIndex-1]->Fill(timeAnode);
    hSTimeCathode->Fill(timeCathode);
        hSTimeCathodeByChamberType[tIndex-1]->Fill(timeCathode);
    hSTimeCombined->Fill(timeCombined);
        hSTimeCombinedByChamberType[tIndex-1]->Fill(timeCombined);
        hSTimeDiffSerial->Fill(chamberSerial(id),timeAnode-timeCathode);
        hSTimeAnodeSerial->Fill(chamberSerial(id),timeAnode);
        hSTimeCathodeSerial->Fill(chamberSerial(id),timeCathode);
        hSTimeCombinedSerial->Fill(chamberSerial(id),timeCombined);
    hSTimeVsZ->Fill(globZ, timeCombined);
    hSTimeVsTOF->Fill(globTOF, timeCombined);

  } // end segment loop

  //  if (nSegments == 0) nSegments = -1; // I see no point in doing this
  hSnSegments->Fill(nSegments);

}

void CSCOfflineMonitor::doStripDigis ( edm::Handle< CSCStripDigiCollection >  strips )

private

Definition at line 794 of file CSCOfflineMonitor.cc.

References mps_update::diff, objects.autophobj::float, and electronIdCutBased_cfi::threshold.

                                                                            {

  int nStripsFired = 0;
  for (CSCStripDigiCollection::DigiRangeIterator dSDiter=strips->begin(); dSDiter!=strips->end(); dSDiter++) {
    CSCDetId id = (CSCDetId)(*dSDiter).first;
    std::vector<CSCStripDigi>::const_iterator stripIter = (*dSDiter).second.first;
    std::vector<CSCStripDigi>::const_iterator lStrip = (*dSDiter).second.second;
    for( ; stripIter != lStrip; ++stripIter) {
      int myStrip = stripIter->getStrip();
      std::vector<int> myADCVals = stripIter->getADCCounts();
      bool thisStripFired = false;
      float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float threshold = 13.3 ;
      float diff = 0.;
      for (unsigned int iCount = 0; iCount < myADCVals.size(); iCount++) {
    diff = (float)myADCVals[iCount]-thisPedestal;
    if (diff > threshold) { thisStripFired = true; }
      } 
      if (thisStripFired) {
        nStripsFired++;
        hStripNumber[typeIndex(id)-1]->Fill(myStrip);
      }
    }
  } // end strip loop

  // this way you can zero suppress but still store info on # events with no digis
  // Tim: I guess the above comment means 'zero suppress' because the hist range is from -0.5.
  // But doing this means the hist statistics are broken. If the zero bin is high, just apply log scale?
  //  if (nStripsFired == 0) nStripsFired = -1;
  hStripNFired->Fill(nStripsFired);
  // fill n per event

}

void CSCOfflineMonitor::doWireDigis ( edm::Handle< CSCWireDigiCollection >  wires )

private

Definition at line 764 of file CSCOfflineMonitor.cc.

                                                                         {

  int nWireGroupsTotal = 0;
  for (CSCWireDigiCollection::DigiRangeIterator dWDiter=wires->begin(); dWDiter!=wires->end(); dWDiter++) {
    CSCDetId id = (CSCDetId)(*dWDiter).first;
    std::vector<CSCWireDigi>::const_iterator wireIter = (*dWDiter).second.first;
    std::vector<CSCWireDigi>::const_iterator lWire = (*dWDiter).second.second;
    for( ; wireIter != lWire; ++wireIter) {
      int myWire = wireIter->getWireGroup();
      int myTBin = wireIter->getTimeBin();
      nWireGroupsTotal++;
      hWireTBin[typeIndex(id)-1]->Fill(myTBin);
      hWireNumber[typeIndex(id)-1]->Fill(myWire);
    }
  } // end wire loop

  // this way you can zero suppress but still store info on # events with no digis
  // Tim: I'm unhappy with that since it breaks hist statistics
  //  if (nWireGroupsTotal == 0) nWireGroupsTotal = -1;
  hWirenGroupsTotal->Fill(nWireGroupsTotal);

}

double CSCOfflineMonitor::extrapolate1D ( double  initPosition, double  initDirection, double  parameterOfTheLine  )

inlineprivate

Definition at line 134 of file CSCOfflineMonitor.h.

References relativeConstraints::ring, relativeConstraints::station, and withinSensitiveRegion().

                                                                                            {
    double extrapolatedPosition = initPosition + initDirection*parameterOfTheLine;
    return extrapolatedPosition; 
  }

void CSCOfflineMonitor::fillEfficiencyHistos ( int  bin, int  flag  )

private

float CSCOfflineMonitor::fitX ( const CLHEP::HepMatrix &  sp, const CLHEP::HepMatrix &  ep  )

private

Definition at line 1142 of file CSCOfflineMonitor.cc.

References delta, benchmark_cfg::errors, mps_fire::i, PixelPairStep_cff::points, S(), and slope.

                                                                                       {

  float S   = 0;
  float Sx  = 0;
  float Sy  = 0;
  float Sxx = 0;
  float Sxy = 0;
  float sigma2 = 0;

  for (int i=1;i<7;i++){
    if (i != 3){
      sigma2 = errors(i,1)*errors(i,1);
      S = S + (1/sigma2);
      Sy = Sy + (points(i,1)/sigma2);
      Sx = Sx + ((i)/sigma2);
      Sxx = Sxx + (i*i)/sigma2;
      Sxy = Sxy + (((i)*points(i,1))/sigma2);
    }
  }

  float delta = S*Sxx - Sx*Sx;
  float intercept = (Sxx*Sy - Sx*Sxy)/delta;
  float slope = (S*Sxy - Sx*Sy)/delta;

  return (intercept + slope*3);

}

float CSCOfflineMonitor::getSignal ( const CSCStripDigiCollection &  stripdigis, CSCDetId  idRH, int  centerStrip  )

private

Definition at line 1177 of file CSCOfflineMonitor.cc.

References objects.autophobj::float, reco::if(), and plotBeamSpotDB::last.

                                                                  {

  float SigADC[5];
  float TotalADC = 0;
  SigADC[0] = 0;
  SigADC[1] = 0;
  SigADC[2] = 0;
  SigADC[3] = 0;
  SigADC[4] = 0;


  // Loop over strip digis 
  CSCStripDigiCollection::DigiRangeIterator sIt;

  for (sIt = stripdigis.begin(); sIt != stripdigis.end(); sIt++){
    CSCDetId id = (CSCDetId)(*sIt).first;
    if (id == idCS){

      // First, find the Signal-Pedestal for center strip
      vector<CSCStripDigi>::const_iterator digiItr = (*sIt).second.first;
      vector<CSCStripDigi>::const_iterator last = (*sIt).second.second;
      for ( ; digiItr != last; ++digiItr ) {
        int thisStrip = digiItr->getStrip();
        if (thisStrip == (centerStrip)){
      std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
      SigADC[0] = thisSignal - 6*thisPedestal;
    }
     // Now,find the Signal-Pedestal for neighbouring 4 strips
        if (thisStrip == (centerStrip+1)){
      std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
      SigADC[1] = thisSignal - 6*thisPedestal;
    }
        if (thisStrip == (centerStrip+2)){
      std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
      SigADC[2] = thisSignal - 6*thisPedestal;
    }
        if (thisStrip == (centerStrip-1)){
      std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
      SigADC[3] = thisSignal - 6*thisPedestal;
    }
        if (thisStrip == (centerStrip-2)){
      std::vector<int> myADCVals = digiItr->getADCCounts();
          float thisPedestal = 0.5*(float)(myADCVals[0]+myADCVals[1]);
      float thisSignal = (myADCVals[2]+myADCVals[3]+myADCVals[4]+myADCVals[5]+myADCVals[6]+myADCVals[7]);
      SigADC[4] = thisSignal - 6*thisPedestal;
    }
      }
      TotalADC = 0.2*(SigADC[0]+SigADC[1]+SigADC[2]+SigADC[3]+SigADC[4]);
    }
  }
  return TotalADC;
}

double CSCOfflineMonitor::lineParametrization ( double  z1Position, double  z2Position, double  z1Direction  )

inlineprivate

Definition at line 129 of file CSCOfflineMonitor.h.

                                                                                      {
    double parameterLine = (z2Position-z1Position)/z1Direction;
    return parameterLine;
  }

int CSCOfflineMonitor::typeIndex ( CSCDetId  id, int  flag = 1  )

private

Definition at line 1857 of file CSCOfflineMonitor.cc.

References makeMuonMisalignmentScenario::endcap, diffTreeTool::index, relativeConstraints::ring, and relativeConstraints::station.

                                                     {

    // linearized index based on endcap, station, and ring

  if (flag == 1){
    int index = 0;
    if (id.station() == 1) index = id.ring();
    else index = id.station()*2 + id.ring();
    if (id.endcap() == 1) index = index + 10;
    if (id.endcap() == 2) index = 11 - index;
    return index;
  }

  else if (flag == 2){
    int index = 0;
    if (id.station() == 1 && id.ring() != 4) index = id.ring()+1;
    if (id.station() == 1 && id.ring() == 4) index = 1; 
    if (id.station() != 1) index = id.station()*2 + id.ring();
    if (id.endcap() == 1) index = index + 10;
    if (id.endcap() == 2) index = 11 - index;
    return index;
  }

  else return 0;

}

bool CSCOfflineMonitor::withinSensitiveRegion ( LocalPoint  localPos, const std::array< const float, 4 > &  layerBounds, int  station, int  ring, float  shiftFromEdge, float  shiftFromDeadZone  )

private

Definition at line 1756 of file CSCOfflineMonitor.cc.

References funct::abs(), PV3DBase< T, PVType, FrameType >::x(), and PV3DBase< T, PVType, FrameType >::y().

Referenced by extrapolate1D().

                                                                                                                  {
//---- check if it is in a good local region (sensitive area - geometrical and HV boundaries excluded) 
  bool pass = false;

  float y_center = 0.;
  double yUp = layerBounds[3] + y_center;
  double yDown = - layerBounds[3] + y_center;
  double xBound1Shifted = layerBounds[0] - shiftFromEdge;//
  double xBound2Shifted = layerBounds[1] - shiftFromEdge;//
  double lineSlope = (yUp - yDown)/(xBound2Shifted-xBound1Shifted);
  double lineConst = yUp - lineSlope*xBound2Shifted;
  double yBorder =  lineSlope*abs(localPos.x()) + lineConst;

  //bool withinChamberOnly = false;// false = "good region"; true - boundaries only
  std::vector <float> deadZoneCenter(6);
  float cutZone = shiftFromDeadZone;//cm
  //---- hardcoded... not good
  if(station>1 && station<5){
    if(2==ring){
      deadZoneCenter[0]= -162.48 ;
      deadZoneCenter[1] = -81.8744;
      deadZoneCenter[2] = -21.18165;
      deadZoneCenter[3] = 39.51105;
      deadZoneCenter[4] = 100.2939;
      deadZoneCenter[5] = 160.58;

      if(localPos.y() >yBorder &&
     ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
      (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
      (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone) ||
      (localPos.y()> deadZoneCenter[3] + cutZone && localPos.y()< deadZoneCenter[4] - cutZone) ||
      (localPos.y()> deadZoneCenter[4] + cutZone && localPos.y()< deadZoneCenter[5] - cutZone))){
    pass = true;
      }
    }
    else if(1==ring){
      if(2==station){
    deadZoneCenter[0]= -95.80 ;
    deadZoneCenter[1] = -27.47;
    deadZoneCenter[2] = 33.67;
    deadZoneCenter[3] = 90.85;
        }
      else if(3==station){
    deadZoneCenter[0]= -89.305 ;
    deadZoneCenter[1] = -39.705;
    deadZoneCenter[2] = 20.195;
    deadZoneCenter[3] = 77.395;
      }
      else if(4==station){
    deadZoneCenter[0]= -75.645;
    deadZoneCenter[1] = -26.055;
    deadZoneCenter[2] = 23.855;
    deadZoneCenter[3] = 70.575;
      }
      if(localPos.y() >yBorder &&
     ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
      (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
      (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone))){
    pass = true;
      }
    }
  }
  else if(1==station){
    if(3==ring){
      deadZoneCenter[0]= -83.155 ;
      deadZoneCenter[1] = -22.7401;
      deadZoneCenter[2] = 27.86665;
      deadZoneCenter[3] = 81.005;
      if(localPos.y() > yBorder &&
     ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
      (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
      (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone))){
    pass = true;
      }
    }
    else if(2==ring){
      deadZoneCenter[0]= -86.285 ;
      deadZoneCenter[1] = -32.88305;
      deadZoneCenter[2] = 32.867423;
      deadZoneCenter[3] = 88.205;
      if(localPos.y() > (yBorder) &&
     ((localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone) ||
      (localPos.y()> deadZoneCenter[1] + cutZone && localPos.y()< deadZoneCenter[2] - cutZone) ||
      (localPos.y()> deadZoneCenter[2] + cutZone && localPos.y()< deadZoneCenter[3] - cutZone))){
    pass = true;
      }
    }
    else{
      deadZoneCenter[0]= -81.0;
      deadZoneCenter[1] = 81.0;
      if(localPos.y() > (yBorder) &&
     (localPos.y()> deadZoneCenter[0] + cutZone && localPos.y()< deadZoneCenter[1] - cutZone )){
    pass = true;
      }
    }
  }
  return pass;
}

Member Data Documentation

edm::EDGetTokenT<CSCALCTDigiCollection> CSCOfflineMonitor::al_token

private

Definition at line 93 of file CSCOfflineMonitor.h.

edm::EDGetTokenT<CSCCLCTDigiCollection> CSCOfflineMonitor::cl_token

private

Definition at line 94 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTgetBX

private

Definition at line 227 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTgetBX2Denominator

private

Definition at line 231 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTgetBX2DNumerator

private

Definition at line 232 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTgetBXSerial

private

Definition at line 228 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTMatch

private

Definition at line 234 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTMatch2Denominator

private

Definition at line 238 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTMatch2DNumerator

private

Definition at line 239 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hALCTMatchSerial

private

Definition at line 235 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hCLCTL1A

private

Definition at line 241 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hCLCTL1A2Denominator

private

Definition at line 245 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hCLCTL1A2DNumerator

private

Definition at line 246 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hCLCTL1ASerial

private

Definition at line 242 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hCSCOccupancy

private

Definition at line 205 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hEffDenominator

private

Definition at line 223 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hORecHits

private

Definition at line 199 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hORecHitsSerial

private

Definition at line 203 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOSegments

private

Definition at line 200 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOSegmentsSerial

private

Definition at line 204 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOStrips

private

Definition at line 197 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOStripsAndWiresAndCLCT

private

Definition at line 198 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOStripSerial

private

Definition at line 202 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOWires

private

Definition at line 195 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOWiresAndCLCT

private

Definition at line 196 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hOWireSerial

private

Definition at line 201 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hRHden

private

Definition at line 211 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHGlobal

private

Definition at line 158 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hRHnrechits

private

Definition at line 157 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hRHnum

private

Definition at line 210 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHRatioQ

private

Definition at line 162 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hRHSTE2

private

Definition at line 215 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHsterr

private

Definition at line 164 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHstpos

private

Definition at line 163 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHSumQ

private

Definition at line 159 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHTiming

private

Definition at line 160 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hRHTimingAnode

private

Definition at line 161 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSChiSq

private

Definition at line 171 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSChiSqAll

private

Definition at line 170 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSChiSqProb

private

Definition at line 173 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSChiSqProbAll

private

Definition at line 172 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSden

private

Definition at line 209 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSensitiveAreaEvt

private

Definition at line 224 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSGlobalPhi

private

Definition at line 175 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSGlobalTheta

private

Definition at line 174 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSnhits

private

Definition at line 169 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSnhitsAll

private

Definition at line 168 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSnSegments

private

Definition at line 167 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSnum

private

Definition at line 208 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSResid

private

Definition at line 192 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSSTE2

private

Definition at line 214 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeAnode

private

Definition at line 178 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSTimeAnodeByChamberType

private

Definition at line 179 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeAnodeSerial

private

Definition at line 185 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeCathode

private

Definition at line 180 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSTimeCathodeByChamberType

private

Definition at line 181 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeCathodeSerial

private

Definition at line 186 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeCombined

private

Definition at line 182 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSTimeCombinedByChamberType

private

Definition at line 183 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeCombinedSerial

private

Definition at line 187 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeDiff

private

Definition at line 176 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hSTimeDiffByChamberType

private

Definition at line 177 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeDiffSerial

private

Definition at line 184 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeVsTOF

private

Definition at line 189 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hSTimeVsZ

private

Definition at line 188 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hStripNFired

private

Definition at line 152 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hStripNumber

private

Definition at line 153 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hStripPed

private

Definition at line 154 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hStripSTE2

private

Definition at line 216 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hWirenGroupsTotal

private

Definition at line 147 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hWireNumber

private

Definition at line 149 of file CSCOfflineMonitor.h.

MonitorElement* CSCOfflineMonitor::hWireSTE2

private

Definition at line 217 of file CSCOfflineMonitor.h.

std::vector<MonitorElement*> CSCOfflineMonitor::hWireTBin

private

Definition at line 148 of file CSCOfflineMonitor.h.

edm::ParameterSet CSCOfflineMonitor::param

private

Definition at line 88 of file CSCOfflineMonitor.h.

edm::EDGetTokenT<FEDRawDataCollection> CSCOfflineMonitor::rd_token

private

Definition at line 90 of file CSCOfflineMonitor.h.

edm::EDGetTokenT<CSCRecHit2DCollection> CSCOfflineMonitor::rh_token

private

Definition at line 95 of file CSCOfflineMonitor.h.

edm::EDGetTokenT<CSCStripDigiCollection> CSCOfflineMonitor::sd_token

private

Definition at line 92 of file CSCOfflineMonitor.h.

edm::EDGetTokenT<CSCSegmentCollection> CSCOfflineMonitor::se_token

private

Definition at line 96 of file CSCOfflineMonitor.h.

edm::EDGetTokenT<CSCWireDigiCollection> CSCOfflineMonitor::wd_token

private

Definition at line 91 of file CSCOfflineMonitor.h.