#include <TopDiLeptonOfflineDQM.h>

Public Types
enum	DecayChannel { NONE, DIMUON, DIELEC, ELECMU }
	different decay channels More...

enum	Level { STANDARD, VERBOSE, DEBUG }
	different verbosity levels More...

typedef reco::LeafCandidate::LorentzVector	LorentzVector

Public Member Functions
void	book (DQMStore::IBooker &ibooker)
	book histograms in subdirectory directory More...

void	fill (const edm::Event &event, const edm::EventSetup &setup)
	fill monitor histograms with electronId and jetCorrections More...

	MonitorEnsemble (const char *label, const edm::ParameterSet &cfg, edm::ConsumesCollector &&iC)

	~MonitorEnsemble ()
	default destructor More...

Private Member Functions
bool	booked (const std::string histName) const
	check if histogram was booked More...

DecayChannel	decayChannel (const std::vector< const reco::PFCandidate * > &muons, const std::vector< const reco::PFCandidate * > &elecs) const
	determine dileptonic decay channel More...

void	fill (const edm::Event &event, const edm::TriggerResults &triggerTable, std::string channel, const std::vector< std::string > labels) const
	fill trigger monitoring histograms More...

void	fill (const std::string histName, double value) const
	fill histogram if it had been booked before More...

void	fill (const std::string histName, double xValue, double yValue) const
	fill histogram if it had been booked before (2-dim version) More...

void	fill (const std::string histName, double xValue, double yValue, double zValue) const
	fill histogram if it had been booked before (2-dim version) More...

void	loggerBinLabels (std::string hist)
	set labels for event logging histograms More...

std::string	monitorPath (const std::string &label) const

std::string	selectionPath (const std::string &label) const

void	triggerBinLabels (std::string channel, const std::vector< std::string > labels)
	set configurable labels for trigger monitoring histograms More...

Private Attributes
int	diElecLogged_

int	diMuonLogged_

std::vector< std::string >	diMuonPaths_
	trigger paths for di muon channel More...

std::string	directory_

double	eidCutValue_

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate > >	elecIso_
	extra isolation criterion on electron More...

int	elecMuLogged_
	number of logged interesting events More...

std::vector< std::string >	elecMuPaths_

edm::EDGetTokenT< edm::View< reco::PFCandidate > >	elecs_

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate > >	elecSelect_
	extra selection on electrons More...

edm::EDGetTokenT< edm::ValueMap< float > >	electronId_
	electronId label More...

std::map< std::string, MonitorElement * >	hists_

std::string	jetCorrector_
	jetCorrector More...

edm::EDGetTokenT< reco::JetIDValueMap >	jetIDLabel_
	jetID as an extra selection type More...

std::unique_ptr< StringCutObjectSelector< reco::JetID > >	jetIDSelect_
	extra jetID selection on calo jets More...

edm::EDGetTokenT< edm::View< reco::Jet > >	jets_
	input sources for monitoring More...

std::string	jetSelect_

std::string	label_
	instance label More...

double	lowerEdge_
	mass window upper and lower edge More...

std::vector< edm::EDGetTokenT< edm::View< reco::MET > > >	mets_
	considers a vector of METs More...

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate, true > >	muonIso_
	extra isolation criterion on muon More...

edm::EDGetTokenT< edm::View< reco::PFCandidate > >	muons_

std::unique_ptr< StringCutObjectSelector< reco::PFCandidate, true > >	muonSelect_
	extra selection on muons More...

edm::EDGetTokenT< edm::TriggerResults >	triggerTable_
	trigger table More...

double	upperEdge_

Level	verbosity_
	verbosity level for booking More...

Detailed Description

Definition at line 52 of file TopDiLeptonOfflineDQM.h.

Member Typedef Documentation

typedef reco::LeafCandidate::LorentzVector TopDiLeptonOffline::MonitorEnsemble::LorentzVector

make clear which LorentzVector to use for jet, electrons and muon buffering

Definition at line 62 of file TopDiLeptonOfflineDQM.h.

Member Enumeration Documentation

enum TopDiLeptonOffline::MonitorEnsemble::DecayChannel

different decay channels

Enumerator
NONE
DIMUON
DIELEC
ELECMU

Definition at line 64 of file TopDiLeptonOfflineDQM.h.

                     {
     NONE,
     DIMUON,
     DIELEC,
     ELECMU
   };

enum TopDiLeptonOffline::MonitorEnsemble::Level

different verbosity levels

Enumerator
STANDARD
VERBOSE
DEBUG

Definition at line 55 of file TopDiLeptonOfflineDQM.h.

              {
     STANDARD,
     VERBOSE,
     DEBUG
   };

Constructor & Destructor Documentation

MonitorEnsemble::MonitorEnsemble	(	const char *	label,
		const edm::ParameterSet &	cfg,
		edm::ConsumesCollector &&	iC
	)

default contructor MonitorEnsemble(const char* label, const edm::ParameterSet& cfg);

Definition at line 14 of file TopDiLeptonOfflineDQM.cc.

References DEBUG, diMuonPaths_, directory_, eidCutValue_, elecIso_, elecMuPaths_, elecs_, elecSelect_, electronId_, edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), jetCorrector_, jetIDLabel_, jetIDSelect_, jets_, jetSelect_, lowerEdge_, mets_, TtFullHadSignalSelMVATrainTreeSaver_cff::monitoring, muonIso_, muons_, muonSelect_, STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, GlobalPosition_Frontier_DevDB_cff::tag, triggerTable_, upperEdge_, VERBOSE, and verbosity_.

     : label_(label),
       eidCutValue_(0.),
       elecIso_(nullptr),
       elecSelect_(nullptr),
       muonIso_(nullptr),
       muonSelect_(nullptr),
       jetIDSelect_(nullptr),
       lowerEdge_(-1.),
       upperEdge_(-1.),
       elecMuLogged_(0),
       diMuonLogged_(0),
       diElecLogged_(0) {
   // sources have to be given; this PSet is not optional
   edm::ParameterSet sources = cfg.getParameter<edm::ParameterSet>("sources");
   muons_ = iC.consumes<edm::View<reco::PFCandidate> >(
       sources.getParameter<edm::InputTag>("muons"));
   elecs_ = iC.consumes<edm::View<reco::PFCandidate> >(
       sources.getParameter<edm::InputTag>("elecs"));
   jets_ = iC.consumes<edm::View<reco::Jet> >(
       sources.getParameter<edm::InputTag>("jets"));
   for (edm::InputTag const& tag :
        sources.getParameter<std::vector<edm::InputTag> >("mets"))
     mets_.push_back(iC.consumes<edm::View<reco::MET> >(tag));
 
   // elecExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("elecExtras")) {
     edm::ParameterSet elecExtras =
         cfg.getParameter<edm::ParameterSet>("elecExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (elecExtras.existsAs<std::string>("select")) {
       elecSelect_.reset(new StringCutObjectSelector<reco::PFCandidate>(
           elecExtras.getParameter<std::string>("select")));
     }
     // isolation is optional; in case it's not found no
     // isolation will be applied
     if (elecExtras.existsAs<std::string>("isolation")) {
       elecIso_.reset(new StringCutObjectSelector<reco::PFCandidate>(
           elecExtras.getParameter<std::string>("isolation")));
     }
     // electronId is optional; in case it's not found the
     // InputTag will remain empty
     if (elecExtras.existsAs<edm::ParameterSet>("electronId")) {
       edm::ParameterSet elecId =
           elecExtras.getParameter<edm::ParameterSet>("electronId");
       electronId_ = iC.consumes<edm::ValueMap<float> >(
           elecId.getParameter<edm::InputTag>("src"));
       eidCutValue_ = elecId.getParameter<double>("cutValue");
       //    eidPattern_= elecId.getParameter<int>("pattern");
     }
   }
   // muonExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("muonExtras")) {
     edm::ParameterSet muonExtras =
         cfg.getParameter<edm::ParameterSet>("muonExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (muonExtras.existsAs<std::string>("select")) {
       muonSelect_.reset(new StringCutObjectSelector<reco::PFCandidate, true>(
           muonExtras.getParameter<std::string>("select")));
     }
     // isolation is optional; in case it's not found no
     // isolation will be applied
     if (muonExtras.existsAs<std::string>("isolation")) {
       muonIso_.reset(new StringCutObjectSelector<reco::PFCandidate, true>(
           muonExtras.getParameter<std::string>("isolation")));
     }
   }
   // jetExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("jetExtras")) {
     edm::ParameterSet jetExtras =
         cfg.getParameter<edm::ParameterSet>("jetExtras");
     // jetCorrector is optional; in case it's not found
     // the InputTag will remain empty
     if (jetExtras.existsAs<std::string>("jetCorrector")) {
       jetCorrector_ = jetExtras.getParameter<std::string>("jetCorrector");
     }
     // read jetID information if it exists
     if (jetExtras.existsAs<edm::ParameterSet>("jetID")) {
       edm::ParameterSet jetID =
           jetExtras.getParameter<edm::ParameterSet>("jetID");
       jetIDLabel_ = iC.consumes<reco::JetIDValueMap>(
           jetID.getParameter<edm::InputTag>("label"));
       jetIDSelect_.reset(new StringCutObjectSelector<reco::JetID>(
           jetID.getParameter<std::string>("select")));
     }
     // select is optional; in case it's not found no
     // selection will be applied (only implemented for
     // CaloJets at the moment)
     if (jetExtras.existsAs<std::string>("select")) {
       jetSelect_ = jetExtras.getParameter<std::string>("select");
     }
   }
   // triggerExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("triggerExtras")) {
     edm::ParameterSet triggerExtras =
         cfg.getParameter<edm::ParameterSet>("triggerExtras");
     triggerTable_ = iC.consumes<edm::TriggerResults>(
         triggerExtras.getParameter<edm::InputTag>("src"));
     elecMuPaths_ =
         triggerExtras.getParameter<std::vector<std::string> >("pathsELECMU");
     diMuonPaths_ =
         triggerExtras.getParameter<std::vector<std::string> >("pathsDIMUON");
   }
   // massExtras is optional; in case it's not found no mass
   // window cuts are applied for the same flavor monitor
   // histograms
   if (cfg.existsAs<edm::ParameterSet>("massExtras")) {
     edm::ParameterSet massExtras =
         cfg.getParameter<edm::ParameterSet>("massExtras");
     lowerEdge_ = massExtras.getParameter<double>("lowerEdge");
     upperEdge_ = massExtras.getParameter<double>("upperEdge");
   }
 
   // setup the verbosity level for booking histograms;
   // per default the verbosity level will be set to
   // STANDARD. This will also be the chosen level in
   // the case when the monitoring PSet is not found
   verbosity_ = STANDARD;
   if (cfg.existsAs<edm::ParameterSet>("monitoring")) {
     edm::ParameterSet monitoring =
         cfg.getParameter<edm::ParameterSet>("monitoring");
     if (monitoring.getParameter<std::string>("verbosity") == "DEBUG")
       verbosity_ = DEBUG;
     if (monitoring.getParameter<std::string>("verbosity") == "VERBOSE")
       verbosity_ = VERBOSE;
     if (monitoring.getParameter<std::string>("verbosity") == "STANDARD")
       verbosity_ = STANDARD;
   }
   // and don't forget to do the histogram booking
   directory_ = cfg.getParameter<std::string>("directory");
 }

TopDiLeptonOffline::MonitorEnsemble::~MonitorEnsemble ( )

inline

default destructor

Definition at line 77 of file TopDiLeptonOfflineDQM.h.

References book(), fill(), and GeneralSetup::setup().

77 {};

Member Function Documentation

void MonitorEnsemble::book ( DQMStore::IBooker & ibooker )

book histograms in subdirectory directory

Definition at line 150 of file TopDiLeptonOfflineDQM.cc.

References DQMStore::IBooker::book1D(), DQMStore::IBooker::book2D(), diMuonPaths_, directory_, vertexPlots::e4, elecMuPaths_, hists_, label_, loggerBinLabels(), DQMStore::IBooker::setCurrentFolder(), STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, triggerBinLabels(), VERBOSE, and verbosity_.

Referenced by ~MonitorEnsemble().

                                                     {
   // set up the current directory path
   std::string current(directory_);
   current += label_;
   ibooker.setCurrentFolder(current);
 
   // determine number of bins for trigger monitoring
   unsigned int nElecMu = elecMuPaths_.size();
   unsigned int nDiMuon = diMuonPaths_.size();
 
   // --- [STANDARD] --- //
   // Run Number
   hists_["RunNumb_"] = ibooker.book1D("RunNumber", "Run Nr.", 1.e4, 1.5e5, 3.e5);
   // invariant mass of opposite charge lepton pair (only filled for same flavor)
   hists_["invMass_"] = ibooker.book1D("InvMass", "M(lep1, lep2)", 80, 0., 320.);
   // invariant mass of opposite charge lepton pair (only filled for same flavor)
   hists_["invMassLog_"] = ibooker.book1D("InvMassLog",
       "log_{10}(M(lep1, lep2))", 80, .1, 2.5);
   // invariant mass of same charge lepton pair (log10 for low mass region, only
   // filled for same flavor)
   hists_["invMassWC_"] = ibooker.book1D("InvMassWC", "M_{WC}(L1, L2)", 80, 0., 320.);
   // invariant mass of same charge lepton pair (log10 for low mass region, only
   // filled for same flavor)
   hists_["invMassWCLog_"] = ibooker.book1D("InvMassLogWC",
       "log_{10}(M_{WC})", 80, .1, 2.5);
   // decay channel [1]: muon/muon, [2]:elec/elec, [3]:elec/muon
   hists_["decayChannel_"] = ibooker.book1D("DecayChannel", "Decay Channel", 3, 0, 3);
   // trigger efficiency estimates for the electron muon channel
   hists_["elecMuEff_"] = ibooker.book1D("ElecMuEff",
       "Eff(e/#mu paths)", nElecMu, 0., nElecMu);
   // monitored trigger occupancy for the electron muon channel
   hists_["elecMuMon_"] = ibooker.book1D("ElecMuMon",
       "Mon(e/#mu paths)", nElecMu, 0., nElecMu);
   // trigger efficiency estimates for the di muon channel
   hists_["diMuonEff_"] = ibooker.book1D("DiMuonEff",
       "Eff(#mu/#mu paths)", nDiMuon, 0., nDiMuon);
   // monitored trigger occupancy for the di muon channel
   hists_["diMuonMon_"] = ibooker.book1D("DiMuonMon",
       "Mon(#mu/#mu paths)", nDiMuon, 0., nDiMuon);
   // pt of the leading lepton
   hists_["lep1Pt_"] = ibooker.book1D("Lep1Pt", "pt(lep1)", 50, 0., 200.);
   // pt of the 2. leading lepton
   hists_["lep2Pt_"] = ibooker.book1D("Lep2Pt", "pt(lep2)", 50, 0., 200.);
   // multiplicity of jets with pt>30 (corrected to L2+L3)
   hists_["jetMult_"] = ibooker.book1D("JetMult", "N_{30}(jet)", 21, -0.5, 20.5);
   // MET (calo)
   hists_["metCalo_"] = ibooker.book1D("METCalo", "MET_{Calo}", 50, 0., 200.);
 
   // set bin labels for trigger monitoring
   triggerBinLabels(std::string("elecMu"), elecMuPaths_);
   triggerBinLabels(std::string("diMuon"), diMuonPaths_);
   // set bin labels for decayChannel_
   hists_["decayChannel_"]->setBinLabel(1, "#mu e", 1);
   hists_["decayChannel_"]->setBinLabel(2, "#mu #mu", 1);
   hists_["decayChannel_"]->setBinLabel(3, "e e", 1);
 
   if (verbosity_ == STANDARD) return;
 
   // --- [VERBOSE] --- //
   // mean eta of the candidate leptons
   hists_["sumEtaL1L2_"] = ibooker.book1D("SumEtaL1L2",
       "<#eta>(lep1, lep2)", 100, -5., 5.);
   // deltaEta between the 2 candidate leptons
   hists_["dEtaL1L2_"] = ibooker.book1D("DEtaL1L2",
       "#Delta#eta(lep1,lep2)", 80, -4., 4.);
   // deltaPhi between the 2 candidate leptons
   hists_["dPhiL1L2_"] = ibooker.book1D("DPhiL1L2",
       "#Delta#phi(lep1,lep2)", 64, -3.2, 3.2);
   // pt of the candidate electron (depending on the decay channel)
   hists_["elecPt_"] = ibooker.book1D("ElecPt", "pt(e)", 50, 0., 200.);
   // relative isolation of the candidate electron (depending on the decay
   // channel)
   hists_["elecRelIso_"] = ibooker.book1D("ElecRelIso", "Iso_{Rel}(e)", 50, 0., 1.);
   // pt of the canddiate muon (depending on the decay channel)
   hists_["muonPt_"] = ibooker.book1D("MuonPt", "pt(#mu)", 50, 0., 200.);
   // relative isolation of the candidate muon (depending on the decay channel)
   hists_["muonRelIso_"] = ibooker.book1D("MuonRelIso",
       "Iso_{Rel}(#mu) (#Delta#beta Corrected)", 50, 0., 1.);
   // pt of the 1. leading jet (corrected to L2+L3)
   hists_["jet1Pt_"] = ibooker.book1D("Jet1Pt", "pt_{L2L3}(jet1)", 60, 0., 300.);
   // pt of the 2. leading jet (corrected to L2+L3)
   hists_["jet2Pt_"] = ibooker.book1D("Jet2Pt", "pt_{L2L3}(jet2)", 60, 0., 300.);
   // MET (PF)
   hists_["metPflow_"] = ibooker.book1D("METPflow", "MET_{Pflow}", 50, 0., 200.);
   // MET (TC)
   hists_["metTC_"] = ibooker.book1D("METTC", "MET_{TC}", 50, 0., 200.);
   // dz for muons (to suppress cosmis)
   hists_["muonDelZ_"] = ibooker.book1D("MuonDelZ", "d_{z}(#mu)", 50, -25., 25.);
   // dxy for muons (to suppress cosmics)
   hists_["muonDelXY_"] = ibooker.book2D("MuonDelXY",
       "d_{xy}(#mu)", 50, -1., 1., 50, -1., 1.);
   // lepton multiplicity after std isolation
   hists_["lepMultIso_"] = ibooker.book2D("LepMultIso",
       "N_{Iso}(e) vs N_{Iso}(#mu)", 5, 0., 5., 5, 0., 5.);
 
   // set axes titles for dxy for muons
   hists_["muonDelXY_"]->setAxisTitle("x [cm]", 1);
   hists_["muonDelXY_"]->setAxisTitle("y [cm]", 2);
   // set axes titles for lepton multiplicity after std isolation
   hists_["lepMultIso_"]->setAxisTitle("N_{Iso}(#mu)", 1);
   hists_["lepMultIso_"]->setAxisTitle("N_{Iso}(elec)", 2);
 
   if (verbosity_ == VERBOSE) return;
 
   // --- [DEBUG] --- //
   // electron multiplicity after std isolation
   hists_["elecMultIso_"] = ibooker.book1D("ElecMultIso",
       "N_{Iso}(e)", 11, -0.5, 10.5);
   // muon multiplicity after std isolation
   hists_["muonMultIso_"] = ibooker.book1D("MuonMultIso",
       "N_{Iso}(#mu)", 11, -0.5, 10.5);
   // charged hadron isolation component of the candidate muon (depending on the
   // decay channel)
   hists_["muonChHadIso_"] = ibooker.book1D("MuonChHadIsoComp",
       "ChHad_{IsoComponent}(#mu)", 50, 0., 5.);
   // neutral hadron isolation component of the candidate muon (depending on the
   // decay channel)
   hists_["muonNeHadIso_"] = ibooker.book1D("MuonNeHadIsoComp",
       "NeHad_{IsoComponent}(#mu)", 50, 0., 5.);
   // photon isolation component of the candidate muon (depending on the decay
   // channel)
   hists_["muonPhIso_"] = ibooker.book1D("MuonPhIsoComp",
       "Photon_{IsoComponent}(#mu)", 50, 0., 5.);
   // charged hadron isolation component of the candidate electron (depending on
   // the decay channel)
   hists_["elecChHadIso_"] = ibooker.book1D("ElectronChHadIsoComp",
       "ChHad_{IsoComponent}(e)", 50, 0., 5.);
   // neutral hadron isolation component of the candidate electron (depending on
   // the decay channel)
   hists_["elecNeHadIso_"] = ibooker.book1D("ElectronNeHadIsoComp",
       "NeHad_{IsoComponent}(e)", 50, 0., 5.);
   // photon isolation component of the candidate electron (depending on the
   // decay channel)
   hists_["elecPhIso_"] = ibooker.book1D("ElectronPhIsoComp",
       "Photon_{IsoComponent}(e)", 50, 0., 5.);
   // eta of the leading jet
   hists_["jet1Eta_"] = ibooker.book1D("Jet1Eta", "#eta(jet1)", 30, -5., 5.);
   // eta of the 2. leading jet
   hists_["jet2Eta_"] = ibooker.book1D("Jet2Eta", "#eta(jet2)", 30, -5., 5.);
   // pt of the 1. leading jet (not corrected)
   hists_["jet1PtRaw_"] = ibooker.book1D("Jet1PtRaw", "pt_{Raw}(jet1)", 60, 0., 300.);
   // pt of the 2. leading jet (not corrected)
   hists_["jet2PtRaw_"] = ibooker.book1D("Jet2PtRaw", "pt_{Raw}(jet2)", 60, 0., 300.);
   // deltaEta between the 2 leading jets
   hists_["dEtaJet1Jet2_"] = ibooker.book1D("DEtaJet1Jet2",
       "#Delta#eta(jet1,jet2)", 80, -4., 4.);
   // deltaEta between the lepton and the leading jet
   hists_["dEtaJet1Lep1_"] = ibooker.book1D("DEtaJet1Lep1",
       "#Delta#eta(jet1,lep1)", 80, -4., 4.);
   // deltaEta between the lepton and MET
   hists_["dEtaLep1MET_"] = ibooker.book1D("DEtaLep1MET",
       "#Delta#eta(lep1,MET)", 80, -4., 4.);
   // deltaEta between leading jet and MET
   hists_["dEtaJet1MET_"] =  ibooker.book1D("DEtaJet1MET",
       "#Delta#eta(jet1,MET)", 80, -4., 4.);
   // deltaPhi of 2 leading jets
   hists_["dPhiJet1Jet2_"] = ibooker.book1D("DPhiJet1Jet2",
       "#Delta#phi(jet1,jet2)", 64, -3.2, 3.2);
   // deltaPhi of 1. lepton and 1. jet
   hists_["dPhiJet1Lep1_"] = ibooker.book1D("DPhiJet1Lep1",
       "#Delta#phi(jet1,lep1)", 64, -3.2, 3.2);
   // deltaPhi of 1. lepton and MET
   hists_["dPhiLep1MET_"] = ibooker.book1D("DPhiLep1MET",
       "#Delta#phi(lep1,MET)", 64, -3.2, 3.2);
   // deltaPhi of 1. jet and MET
   hists_["dPhiJet1MET_"] = ibooker.book1D("DPhiJet1MET",
       "#Delta#phi(jet1,MET)", 64, -3.2, 3.2);
   // selected dimuon events
   hists_["diMuonLogger_"] = ibooker.book2D("DiMuonLogger",
       "Logged DiMuon Events", 8, 0., 8., 10, 0., 10.);
   // selected dielec events
   hists_["diElecLogger_"] = ibooker.book2D("DiElecLogger",
       "Logged DiElec Events", 8, 0., 8., 10, 0., 10.);
   // selected elemu events
   hists_["elecMuLogger_"] = ibooker.book2D("ElecMuLogger",
       "Logged ElecMu Events", 8, 0., 8., 10, 0., 10.);
 
   // set bin labels for trigger monitoring
   loggerBinLabels(std::string("diMuonLogger_"));
   loggerBinLabels(std::string("diElecLogger_"));
   loggerBinLabels(std::string("elecMuLogger_"));
   return;
 }

bool TopDiLeptonOffline::MonitorEnsemble::booked ( const std::string histName ) const

inlineprivate

check if histogram was booked

Definition at line 110 of file TopDiLeptonOfflineDQM.h.

References hists_.

Referenced by fill().

                                               {
     return hists_.find(histName.c_str()) != hists_.end();
   };

MonitorEnsemble::DecayChannel MonitorEnsemble::decayChannel	(	const std::vector< const reco::PFCandidate * > &	muons,
		const std::vector< const reco::PFCandidate * > &	elecs
	)		const

inlineprivate

determine dileptonic decay channel

Definition at line 256 of file TopDiLeptonOfflineDQM.h.

References DIELEC, DIMUON, ELECMU, and NONE.

Referenced by fill(), and selectionPath().

                                                           {
   DecayChannel type = NONE;
   if (muons.size() > 1) {
     type = DIMUON;
   } else if (elecs.size() > 1) {
     type = DIELEC;
   } else if (!elecs.empty() && !muons.empty()) {
     type = ELECMU;
   }
   return type;
 }

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

fill monitor histograms with electronId and jetCorrections

Definition at line 334 of file TopDiLeptonOfflineDQM.cc.

References slimmedMETs_cfi::caloMET, ALCARECOTkAlJpsiMuMu_cff::charge, mitigatedMETSequence_cff::corrector, decayChannel(), reco::deltaPhi(), reco::deltaR(), DIELEC, diElecLogged_, DIMUON, diMuonLogged_, diMuonPaths_, eidCutValue_, elecIso_, ELECMU, elecMuLogged_, elecMuPaths_, PatTopSelectionAnalyzer_cfi::elecs, elecs_, elecSelect_, electronId_, reco::LeafCandidate::et(), stringResolutionProvider_cfi::eta, edm::EventAuxiliary::event(), edm::Event::eventAuxiliary(), edm::EventSetup::find(), edm::Event::getByToken(), JetCorrector::getJetCorrector(), hists_, training_settings::idx, edm::Ref< C, T, F >::isNull(), edm::EDGetTokenT< T >::isUninitialized(), metsig::jet, jetCorrector_, jetIDLabel_, jetIDSelect_, fwrapper::jets, jets_, jetSelect_, lowerEdge_, edm::EventAuxiliary::luminosityBlock(), edm::eventsetup::EventSetupRecordKey::makeKey(), ResonanceBuilder::mass, hpstanc_transforms::max, RazorAnalyzer::met, mets_, muonIso_, electronCleaner_cfi::muons, muons_, muonSelect_, muon::overlap(), EnergyCorrector::pt, reco::LeafCandidate::pt(), edm::EventAuxiliary::run(), reco::Jet::scaleEnergy(), triggerTable_, and upperEdge_.

Referenced by fill(), selectionPath(), and ~MonitorEnsemble().

                                                        {
   // fetch trigger event if configured such
   edm::Handle<edm::TriggerResults> triggerTable;
   if (!triggerTable_.isUninitialized()) {
     if (!event.getByToken(triggerTable_, triggerTable)) return;
   }
   /*
   ------------------------------------------------------------
 
   Run and Inst. Luminosity information (Inst. Lumi. filled now with a dummy
   value=5.0)
 
   ------------------------------------------------------------
   */
 
   if (!event.eventAuxiliary().run()) return;
   fill("RunNumb_", event.eventAuxiliary().run());
 
   double dummy = 5.;
   fill("InstLumi_", dummy);
 
   /*
   ------------------------------------------------------------
 
   Muon Selection
 
   ------------------------------------------------------------
   */
 
   std::vector<const reco::PFCandidate*> isoMuons;
 
   edm::Handle<edm::View<reco::PFCandidate> > muons;
   edm::View<reco::PFCandidate>::const_iterator muonit;
 
   if (!event.getByToken(muons_, muons)) return;
 
   for (edm::View<reco::PFCandidate>::const_iterator muonit = muons->begin();
        muonit != muons->end(); ++muonit) {
 
     if (muonit->muonRef().isNull()) continue;
     reco::MuonRef muon = muonit->muonRef();
 
     if (muon->innerTrack().isNull()) continue;
 
     if (muon->isGlobalMuon()) {
       fill("muonDelZ_", muon->innerTrack()->vz());  // CB using inner track!
       fill("muonDelXY_", muon->innerTrack()->vx(), muon->innerTrack()->vy());
 
       // apply selection
       if (!muonSelect_ || (*muonSelect_)(*muonit)) {
 
         double chHadPt = muon->pfIsolationR04().sumChargedHadronPt;
         double neHadEt = muon->pfIsolationR04().sumNeutralHadronEt;
         double phoEt = muon->pfIsolationR04().sumPhotonEt;
 
         double pfRelIso =
             (chHadPt +
              std::max(0., neHadEt + phoEt - 0.5 * muon->pfIsolationR04().sumPUPt)) /
             muon->pt();  // CB dBeta corrected iso!
 
         fill("muonRelIso_", pfRelIso);
 
         fill("muonChHadIso_", chHadPt);
         fill("muonNeHadIso_", neHadEt);
         fill("muonPhIso_", phoEt);
 
         if (!muonIso_ || (*muonIso_)(*muonit)) isoMuons.push_back(&(*muonit));
       }
     }
   }
 
   fill("muonMultIso_", isoMuons.size());
 
   /*
   ------------------------------------------------------------
 
   Electron Selection
 
   ------------------------------------------------------------
   */
 
   // buffer isolated electronss
   std::vector<const reco::PFCandidate*> isoElecs;
   edm::Handle<edm::ValueMap<float> > electronId;
   if (!electronId_.isUninitialized()) {
     if (!event.getByToken(electronId_, electronId)) return;
   }
   edm::Handle<edm::View<reco::PFCandidate> > elecs;
   if (!event.getByToken(elecs_, elecs)) return;
 
   for (edm::View<reco::PFCandidate>::const_iterator elec = elecs->begin();
        elec != elecs->end(); ++elec) {
     if (elec->gsfElectronRef().isNull()) {
       continue;
     }
     reco::GsfElectronRef gsf_el = elec->gsfElectronRef();
     // restrict to electrons with good electronId
     if (electronId_.isUninitialized() ? true : ((double)(*electronId)[gsf_el] >=
                                                 eidCutValue_)) {
       // apply preselection
       if (!elecSelect_ || (*elecSelect_)(*elec)) {
         double el_ChHadIso = gsf_el->pfIsolationVariables().sumChargedHadronPt;
         double el_NeHadIso = gsf_el->pfIsolationVariables().sumNeutralHadronEt;
         double el_PhIso = gsf_el->pfIsolationVariables().sumPhotonEt;
         double el_pfRelIso =
             (el_ChHadIso +
              std::max(0., el_NeHadIso + el_PhIso -
                          0.5 * gsf_el->pfIsolationVariables().sumPUPt)) /
             gsf_el->pt();
         fill("elecRelIso_", el_pfRelIso);
         fill("elecChHadIso_", el_ChHadIso);
         fill("elecNeHadIso_", el_NeHadIso);
         fill("elecPhIso_", el_PhIso);
         if (!elecIso_ || (*elecIso_)(*elec)) isoElecs.push_back(&(*elec));
       }
     }
   }
   fill("elecMultIso_", isoElecs.size());
 
   /*
   ------------------------------------------------------------
 
   Jet Selection
 
   ------------------------------------------------------------
   */
 
   const JetCorrector* corrector = 0;
   if (!jetCorrector_.empty()) {
     // check whether a jet correcto is in the event setup or not
     if (setup.find(edm::eventsetup::EventSetupRecordKey::makeKey<
             JetCorrectionsRecord>())) {
       corrector = JetCorrector::getJetCorrector(jetCorrector_, setup);
     } else {
       edm::LogVerbatim("TopDiLeptonOfflineDQM")
           << "\n"
           << "-----------------------------------------------------------------"
              "-------------------- \n"
           << " No JetCorrectionsRecord available from EventSetup:              "
              "                     \n"
           << "  - Jets will not be corrected.                                  "
              "                     \n"
           << "  - If you want to change this add the following lines to your "
              "cfg file:              \n"
           << "                                                                 "
              "                     \n"
           << "  ## load jet corrections                                        "
              "                     \n"
           << "  "
              "process.load(\"JetMETCorrections.Configuration."
              "JetCorrectionServicesAllAlgos_cff\") \n"
           << "  process.prefer(\"ak5CaloL2L3\")                                "
              "                     \n"
           << "                                                                 "
              "                     \n"
           << "-----------------------------------------------------------------"
              "-------------------- \n";
     }
   }
 
   unsigned int mult = 0;
   // buffer leadingJets
   std::vector<reco::Jet> leadingJets;
   edm::Handle<edm::View<reco::Jet> > jets;
   if (!event.getByToken(jets_, jets)) return;
 
   edm::Handle<reco::JetIDValueMap> jetID;
   if (jetIDSelect_) {
     if (!event.getByToken(jetIDLabel_, jetID)) return;
   }
 
   for (edm::View<reco::Jet>::const_iterator jet = jets->begin();
        jet != jets->end(); ++jet) {
     unsigned int idx = jet - jets->begin();
     if (jetIDSelect_ &&
         dynamic_cast<const reco::CaloJet*>(jets->refAt(idx).get())) {
       if (!(*jetIDSelect_)((*jetID)[jets->refAt(idx)])) continue;
     }
     // chekc additional jet selection for calo, pf and bare reco jets
     if (dynamic_cast<const reco::CaloJet*>(&*jet)) {
       reco::CaloJet sel = dynamic_cast<const reco::CaloJet&>(*jet);
       sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       StringCutObjectSelector<reco::CaloJet> jetSelect(jetSelect_);
       if (!jetSelect(sel)) {
         continue;
       }
     } else if (dynamic_cast<const reco::PFJet*>(&*jet)) {
       reco::PFJet sel = dynamic_cast<const reco::PFJet&>(*jet);
       sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       StringCutObjectSelector<reco::PFJet> jetSelect(jetSelect_);
       if (!jetSelect(sel)) continue;
     } else {
       reco::Jet sel = *jet;
       sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       StringCutObjectSelector<reco::Jet> jetSelect(jetSelect_);
       if (!jetSelect(sel)) continue;
     }
     // check for overlaps
     bool overlap = false;
     for (std::vector<const reco::PFCandidate*>::const_iterator elec =
              isoElecs.begin();
          elec != isoElecs.end(); ++elec) {
       if (reco::deltaR((*elec)->eta(), (*elec)->phi(), jet->eta(), jet->phi()) <
           0.4) {
         overlap = true;
         break;
       }
     }
     if (overlap) {
       continue;
     }
     // prepare jet to fill monitor histograms
     reco::Jet monitorJet = *jet;
     monitorJet.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
     ++mult;  // determine jet multiplicity
     if (idx == 0) {
       leadingJets.push_back(monitorJet);
       fill("jet1Pt_", monitorJet.pt());
       fill("jet1PtRaw_", jet->pt());
       fill("jet1Eta_", jet->eta());
     }
     if (idx == 1) {
       leadingJets.push_back(monitorJet);
       fill("jet2Pt_", monitorJet.pt());
       fill("jet2PtRaw_", jet->pt());
       fill("jet2Eta_", jet->eta());
     }
   }
   if (leadingJets.size() > 1) {
     fill("dEtaJet1Jet2_", leadingJets[0].eta() - leadingJets[1].eta());
     fill("dPhiJet1Jet2_",
          reco::deltaPhi(leadingJets[0].phi(), leadingJets[1].phi()));
     if (!isoMuons.empty()) {
       if (isoElecs.empty() || isoMuons[0]->pt() > isoElecs[0]->pt()) {
         fill("dEtaJet1Lep1_", isoMuons[0]->eta() - leadingJets[0].eta());
         fill("dPhiJet1Lep1_",
              reco::deltaPhi(isoMuons[0]->phi(), leadingJets[0].phi()));
       }
     }
     if (!isoElecs.empty()) {
       if (isoMuons.empty() || isoElecs[0]->pt() > isoMuons[0]->pt()) {
         fill("dEtaJet1Lep1_", isoElecs[0]->eta() - leadingJets[0].eta());
         fill("dPhiJet1Lep1_",
              reco::deltaPhi(isoElecs[0]->phi(), leadingJets[0].phi()));
       }
     }
   }
   fill("jetMult_", mult);
 
   /*
   ------------------------------------------------------------
 
   MET Selection
 
   ------------------------------------------------------------
   */
 
   // buffer for event logging
   reco::MET caloMET;
   for (std::vector<edm::EDGetTokenT<edm::View<reco::MET> > >::const_iterator
            met_ = mets_.begin();
        met_ != mets_.end(); ++met_) {
 
     edm::Handle<edm::View<reco::MET> > met;
     if (!event.getByToken(*met_, met)) continue;
 
     if (met->begin() != met->end()) {
       unsigned int idx = met_ - mets_.begin();
       if (idx == 0) {
         caloMET = *met->begin();
         fill("metCalo_", met->begin()->et());
         if (!leadingJets.empty()) {
           fill("dEtaJet1MET_", leadingJets[0].eta() - met->begin()->eta());
           fill("dPhiJet1MET_",
                reco::deltaPhi(leadingJets[0].phi(), met->begin()->phi()));
         }
         if (!isoMuons.empty()) {
           if (isoElecs.empty() || isoMuons[0]->pt() > isoElecs[0]->pt()) {
             fill("dEtaLep1MET_", isoMuons[0]->eta() - met->begin()->eta());
             fill("dPhiLep1MET_",
                  reco::deltaPhi(isoMuons[0]->phi(), met->begin()->phi()));
           }
         }
         if (!isoElecs.empty()) {
           if (isoMuons.empty() || isoElecs[0]->pt() > isoMuons[0]->pt()) {
             fill("dEtaLep1MET_", isoElecs[0]->eta() - met->begin()->eta());
             fill("dPhiLep1MET_",
                  reco::deltaPhi(isoElecs[0]->phi(), met->begin()->phi()));
           }
         }
       }
       if (idx == 1) {
         fill("metTC_", met->begin()->et());
       }
       if (idx == 2) {
         fill("metPflow_", met->begin()->et());
       }
     }
   }
 
   /*
   ------------------------------------------------------------
 
   Event Monitoring
 
   ------------------------------------------------------------
   */
 
   // check number of isolated leptons
   fill("lepMultIso_", isoMuons.size(), isoElecs.size());
   // ELECMU channel
   if (decayChannel(isoMuons, isoElecs) == ELECMU) {
     fill("decayChannel_", 0.5);
     double mass = (isoElecs[0]->p4() + isoMuons[0]->p4()).mass();
     if ((lowerEdge_ == -1. && upperEdge_ == -1.) ||
         (lowerEdge_ < mass && mass < upperEdge_)) {
 
       fill("dEtaL1L2_", isoElecs[0]->eta() - isoMuons[0]->eta());
       fill("sumEtaL1L2_", (isoElecs[0]->eta() + isoMuons[0]->eta()) / 2);
       fill("dPhiL1L2_", reco::deltaPhi(isoElecs[0]->phi(), isoMuons[0]->eta()));
       fill("elecPt_", isoElecs[0]->pt());
       fill("muonPt_", isoMuons[0]->pt());
       fill("lep1Pt_", isoElecs[0]->pt() > isoMuons[0]->pt()
                           ? isoElecs[0]->pt()
                           : isoMuons[0]->pt());
       fill("lep2Pt_", isoElecs[0]->pt() > isoMuons[0]->pt()
                           ? isoMuons[0]->pt()
                           : isoElecs[0]->pt());
       // fill plots for trigger monitoring
       if (!triggerTable_.isUninitialized())
         fill(event, *triggerTable, "elecMu", elecMuPaths_);
       if (elecMuLogged_ <= hists_.find("elecMuLogger_")->second->getNbinsY()) {
         // log runnumber, lumi block, event number & some
         // more pysics infomation for interesting events
         fill("elecMuLogger_", 0.5, elecMuLogged_ + 0.5,
              event.eventAuxiliary().run());
         fill("elecMuLogger_", 1.5, elecMuLogged_ + 0.5,
              event.eventAuxiliary().luminosityBlock());
         fill("elecMuLogger_", 2.5, elecMuLogged_ + 0.5,
              event.eventAuxiliary().event());
         fill("elecMuLogger_", 3.5, elecMuLogged_ + 0.5, isoMuons[0]->pt());
         fill("elecMuLogger_", 4.5, elecMuLogged_ + 0.5, isoElecs[0]->pt());
         if (leadingJets.size() > 0)
           fill("elecMuLogger_", 5.5, elecMuLogged_ + 0.5, leadingJets[0].pt());
         if (leadingJets.size() > 1)
           fill("elecMuLogger_", 6.5, elecMuLogged_ + 0.5, leadingJets[1].pt());
         fill("elecMuLogger_", 7.5, elecMuLogged_ + 0.5, caloMET.et());
         ++elecMuLogged_;
       }
     }
   }
 
   // DIMUON channel
   if (decayChannel(isoMuons, isoElecs) == DIMUON) {
     fill("decayChannel_", 1.5);
     int charge = isoMuons[0]->charge() * isoMuons[1]->charge();
     double mass = (isoMuons[0]->p4() + isoMuons[1]->p4()).mass();
 
     fill(charge < 0 ? "invMass_" : "invMassWC_", mass);
     fill(charge < 0 ? "invMassLog_" : "invMassWCLog_", log10(mass));
     if ((lowerEdge_ == -1. && upperEdge_ == -1.) ||
         (lowerEdge_ < mass && mass < upperEdge_)) {
       fill("dEtaL1L2_", isoMuons[0]->eta() - isoMuons[1]->eta());
       fill("sumEtaL1L2_", (isoMuons[0]->eta() + isoMuons[1]->eta()) / 2);
       fill("dPhiL1L2_", reco::deltaPhi(isoMuons[0]->phi(), isoMuons[1]->phi()));
       fill("muonPt_", isoMuons[0]->pt());
       fill("muonPt_", isoMuons[1]->pt());
       fill("lep1Pt_", isoMuons[0]->pt());
       fill("lep2Pt_", isoMuons[1]->pt());
       // fill plots for trigger monitoring
       if (!triggerTable_.isUninitialized())
         fill(event, *triggerTable, "diMuon", diMuonPaths_);
       if (diMuonLogged_ <= hists_.find("diMuonLogger_")->second->getNbinsY()) {
         // log runnumber, lumi block, event number & some
         // more pysics infomation for interesting events
         fill("diMuonLogger_", 0.5, diMuonLogged_ + 0.5,
              event.eventAuxiliary().run());
         fill("diMuonLogger_", 1.5, diMuonLogged_ + 0.5,
              event.eventAuxiliary().luminosityBlock());
         fill("diMuonLogger_", 2.5, diMuonLogged_ + 0.5,
              event.eventAuxiliary().event());
         fill("diMuonLogger_", 3.5, diMuonLogged_ + 0.5, isoMuons[0]->pt());
         fill("diMuonLogger_", 4.5, diMuonLogged_ + 0.5, isoMuons[1]->pt());
         if (leadingJets.size() > 0)
           fill("diMuonLogger_", 5.5, diMuonLogged_ + 0.5, leadingJets[0].pt());
         if (leadingJets.size() > 1)
           fill("diMuonLogger_", 6.5, diMuonLogged_ + 0.5, leadingJets[1].pt());
         fill("diMuonLogger_", 7.5, diMuonLogged_ + 0.5, caloMET.et());
         ++diMuonLogged_;
       }
     }
   }
 
   // DIELEC channel
   if (decayChannel(isoMuons, isoElecs) == DIELEC) {
     fill("decayChannel_", 2.5);
     int charge = isoElecs[0]->charge() * isoElecs[1]->charge();
     double mass = (isoElecs[0]->p4() + isoElecs[1]->p4()).mass();
     fill(charge < 0 ? "invMass_" : "invMassWC_", mass);
     fill(charge < 0 ? "invMassLog_" : "invMassWCLog_", log10(mass));
     if ((lowerEdge_ == -1. && upperEdge_ == -1.) ||
         (lowerEdge_ < mass && mass < upperEdge_)) {
       fill("dEtaL1L2_", isoElecs[0]->eta() - isoElecs[1]->eta());
       fill("sumEtaL1L2_", (isoElecs[0]->eta() + isoElecs[1]->eta()) / 2);
       fill("dPhiL1L2_", reco::deltaPhi(isoElecs[0]->phi(), isoElecs[1]->phi()));
       fill("elecPt_", isoElecs[0]->pt());
       fill("elecPt_", isoElecs[1]->pt());
       fill("lep1Pt_", isoElecs[0]->pt());
       fill("lep2Pt_", isoElecs[1]->pt());
       if (diElecLogged_ <= hists_.find("diElecLogger_")->second->getNbinsY()) {
         // log runnumber, lumi block, event number & some
         // more pysics infomation for interesting events
         fill("diElecLogger_", 0.5, diElecLogged_ + 0.5,
              event.eventAuxiliary().run());
         fill("diElecLogger_", 1.5, diElecLogged_ + 0.5,
              event.eventAuxiliary().luminosityBlock());
         fill("diElecLogger_", 2.5, diElecLogged_ + 0.5,
              event.eventAuxiliary().event());
         fill("diElecLogger_", 3.5, diElecLogged_ + 0.5, isoElecs[0]->pt());
         fill("diElecLogger_", 4.5, diElecLogged_ + 0.5, isoElecs[1]->pt());
         if (leadingJets.size() > 0)
           fill("diElecLogger_", 5.5, diElecLogged_ + 0.5, leadingJets[0].pt());
         if (leadingJets.size() > 1)
           fill("diElecLogger_", 6.5, diElecLogged_ + 0.5, leadingJets[1].pt());
         fill("diElecLogger_", 7.5, diElecLogged_ + 0.5, caloMET.et());
         ++diElecLogged_;
       }
     }
   }
 }

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::TriggerResults &	triggerTable,
		std::string	channel,
		const std::vector< std::string >	labels
	)		const

inlineprivate

fill trigger monitoring histograms

Definition at line 236 of file TopDiLeptonOfflineDQM.h.

References accept(), fill(), hists_, training_settings::idx, monitorPath(), and selectionPath().

                                                                            {
   for (unsigned int idx = 0; idx < labels.size(); ++idx) {
     if (accept(event, triggerTable, monitorPath(labels[idx]))) {
       fill((channel + "Mon_").c_str(), idx + 0.5);
       // take care to fill triggerMon_ before evts is being called
       int evts = hists_.find((channel + "Mon_").c_str())
                      ->second->getBinContent(idx + 1);
       double value = hists_.find((channel + "Eff_").c_str())
                          ->second->getBinContent(idx + 1);
       fill(
           (channel + "Eff_").c_str(), idx + 0.5,
           1. / evts * (accept(event, triggerTable, selectionPath(labels[idx])) -
                        value));
     }
   }
 }

void TopDiLeptonOffline::MonitorEnsemble::fill	(	const std::string	histName,
		double	value
	)		const

inlineprivate

fill histogram if it had been booked before

Definition at line 114 of file TopDiLeptonOfflineDQM.h.

References booked(), hists_, and edm::second().

                                                           {
     if (booked(histName.c_str()))
       hists_.find(histName.c_str())->second->Fill(value);
   };

void TopDiLeptonOffline::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 119 of file TopDiLeptonOfflineDQM.h.

References booked(), hists_, and edm::second().

                                                                           {
     if (booked(histName.c_str()))
       hists_.find(histName.c_str())->second->Fill(xValue, yValue);
   };

void TopDiLeptonOffline::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue,
		double	zValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 124 of file TopDiLeptonOfflineDQM.h.

References booked(), hists_, and edm::second().

                                  {
     if (booked(histName.c_str()))
       hists_.find(histName.c_str())->second->Fill(xValue, yValue, zValue);
   };

void MonitorEnsemble::loggerBinLabels ( std::string hist )

inlineprivate

set labels for event logging histograms

Definition at line 199 of file TopDiLeptonOfflineDQM.h.

References hists_.

Referenced by book(), and selectionPath().

                                                            {
   // set axes titles for selected events
   hists_[hist.c_str()]->getTH1()->SetOption("TEXT");
   hists_[hist.c_str()]->setBinLabel(1, "Run", 1);
   hists_[hist.c_str()]->setBinLabel(2, "Block", 1);
   hists_[hist.c_str()]->setBinLabel(3, "Event", 1);
   hists_[hist.c_str()]->setBinLabel(6, "pt_{L2L3}(jet1)", 1);
   hists_[hist.c_str()]->setBinLabel(7, "pt_{L2L3}(jet2)", 1);
   hists_[hist.c_str()]->setBinLabel(8, "MET_{Calo}", 1);
   hists_[hist.c_str()]->setAxisTitle("logged evts", 2);
 
   if (hist == "diMuonLogger_") {
     hists_[hist.c_str()]->setBinLabel(4, "pt(muon)", 1);
     hists_[hist.c_str()]->setBinLabel(5, "pt(muon)", 1);
   }
   if (hist == "diElecLogger_") {
     hists_[hist.c_str()]->setBinLabel(4, "pt(elec)", 1);
     hists_[hist.c_str()]->setBinLabel(5, "pt(elec)", 1);
   }
   if (hist == "elecMuLogger_") {
     hists_[hist.c_str()]->setBinLabel(4, "pt(elec)", 1);
     hists_[hist.c_str()]->setBinLabel(5, "pt(muon)", 1);
   }
 }

std::string TopDiLeptonOffline::MonitorEnsemble::monitorPath ( const std::string & label ) const

inlineprivate

deduce monitorPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 87 of file TopDiLeptonOfflineDQM.h.

Referenced by fill(), and triggerBinLabels().

                                                       {
     return label.substr(label.find(':') + 1);
   };

std::string TopDiLeptonOffline::MonitorEnsemble::selectionPath ( const std::string & label ) const

inlineprivate

deduce selectionPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 92 of file TopDiLeptonOfflineDQM.h.

References decayChannel(), PatTopSelectionAnalyzer_cfi::elecs, fill(), create_public_lumi_plots::hist, tablePrinter::labels, loggerBinLabels(), electronCleaner_cfi::muons, AlCaHLTBitMon_QueryRunRegistry::string, and triggerBinLabels().

Referenced by fill(), and triggerBinLabels().

                                                         {
     return label.substr(0, label.find(':'));
   };

void MonitorEnsemble::triggerBinLabels	(	std::string	channel,
		const std::vector< std::string >	labels
	)

inlineprivate

set configurable labels for trigger monitoring histograms

Definition at line 224 of file TopDiLeptonOfflineDQM.h.

References hists_, training_settings::idx, monitorPath(), and selectionPath().

Referenced by book(), and selectionPath().

                                                           {
   for (unsigned int idx = 0; idx < labels.size(); ++idx) {
     hists_[(channel + "Mon_").c_str()]
         ->setBinLabel(idx + 1, "[" + monitorPath(labels[idx]) + "]", 1);
     hists_[(channel + "Eff_").c_str()]
         ->setBinLabel(idx + 1, "[" + selectionPath(labels[idx]) + "]|[" +
                                    monitorPath(labels[idx]) + "]",
                       1);
   }
 }

Member Data Documentation

int TopDiLeptonOffline::MonitorEnsemble::diElecLogged_

private

Definition at line 191 of file TopDiLeptonOfflineDQM.h.

Referenced by fill().

int TopDiLeptonOffline::MonitorEnsemble::diMuonLogged_

private

Definition at line 191 of file TopDiLeptonOfflineDQM.h.

Referenced by fill().

std::vector<std::string> TopDiLeptonOffline::MonitorEnsemble::diMuonPaths_

private

trigger paths for di muon channel

Definition at line 149 of file TopDiLeptonOfflineDQM.h.

Referenced by book(), fill(), and MonitorEnsemble().

std::string TopDiLeptonOffline::MonitorEnsemble::directory_

private

Definition at line 196 of file TopDiLeptonOfflineDQM.h.

Referenced by book(), and MonitorEnsemble().

double TopDiLeptonOffline::MonitorEnsemble::eidCutValue_

private

electronId pattern we expect the following pattern: 0: fails 1: passes electron ID only 2: passes electron Isolation only 3: passes electron ID and Isolation only 4: passes conversion rejection 5: passes conversion rejection and ID 6: passes conversion rejection and Isolation 7: passes the whole selection As described on https://twiki.cern.ch/twiki/bin/view/CMS/SimpleCutBasedEleID

Definition at line 166 of file TopDiLeptonOfflineDQM.h.

Referenced by fill(), and MonitorEnsemble().

std::unique_ptr<StringCutObjectSelector<reco::PFCandidate> > TopDiLeptonOffline::MonitorEnsemble::elecIso_

private

extra isolation criterion on electron

Definition at line 168 of file TopDiLeptonOfflineDQM.h.

Referenced by fill(), and MonitorEnsemble().

int TopDiLeptonOffline::MonitorEnsemble::elecMuLogged_

private

number of logged interesting events

Definition at line 191 of file TopDiLeptonOfflineDQM.h.

Referenced by fill().