L1MuDTEUX Class Reference

#include <L1MuDTEUX.h>

Inheritance diagram for L1MuDTEUX:

Classes
class	EUX_Comp
	helper class for finding the best and second best extrapolation More...

Public Member Functions
unsigned short int	address () const
	return extrapolation address (0-11) (address = 15 indicates negative ext. result) More...
int	id () const
	return Extrapolation identifier More...
	L1MuDTEUX (const L1MuDTSectorProcessor &sp, const L1MuDTSEU &seu, int id)
	constructor More...
void	load (const L1MuDTTrackSegPhi *start_ts, const L1MuDTTrackSegPhi *target_ts)
	load data into EUX More...
bool	operator== (const L1MuDTEUX &) const
	equal operator More...
unsigned int	quality () const
	return extrapolation quality More...
virtual void	reset ()
	reset Extrapolator More...
bool	result () const
	return extrapolation result More...
virtual void	run (const edm::EventSetup &c)
	run Extrapolator More...
std::pair< const L1MuDTTrackSegPhi *, const L1MuDTTrackSegPhi * >	ts () const
	return pointer to start and target track segment More...
virtual	~L1MuDTEUX ()
	destructor More...
Public Member Functions inherited from L1AbstractProcessor
virtual void	run ()
	run processor logic More...
virtual void	run ()
	run processor logic More...
virtual	~L1AbstractProcessor ()
	destructor More...
virtual	~L1AbstractProcessor ()
	destructor More...

Private Member Functions
int	sec_mod (int) const
	output sector numbers in the range -6 to +5 More...

Private Attributes
unsigned short int	m_address
int	m_id
unsigned short int	m_quality
bool	m_result
const L1MuDTSEU &	m_seu
const L1MuDTSectorProcessor &	m_sp
const L1MuDTTrackSegPhi *	m_start
const L1MuDTTrackSegPhi *	m_target
unsigned short const	nbit_phi = 12
unsigned short const	nbit_phib = 10
edm::ESHandle< L1MuDTTFParameters >	pars
int const	theExtFilter = 1
edm::ESHandle< L1MuDTExtLut >	theExtLUTs

Detailed Description

Extrapolator:

The Extrapolator receives a start and a target track segment and performs the actual extrapolation

N. Neumeister CERN EP

Definition at line 48 of file L1MuDTEUX.h.

Constructor & Destructor Documentation

L1MuDTEUX::L1MuDTEUX	(	const L1MuDTSectorProcessor &	sp,
		const L1MuDTSEU &	seu,
		int	id
	)

constructor

Definition at line 51 of file L1MuDTEUX.cc.

                                                                                  : 
    m_sp(sp), m_seu(seu), m_id(id), 
    m_result(false), m_quality(0), m_address(15),
    m_start(0), m_target(0), 
    theExtFilter(sp.tf().config()->getExtTSFilter()),
    nbit_phi(sp.tf().config()->getNbitsExtPhi()),
    nbit_phib(sp.tf().config()->getNbitsExtPhib())
{
}

L1MuDTEUX::~L1MuDTEUX ( )

virtual

destructor

Definition at line 66 of file L1MuDTEUX.cc.

{}

Member Function Documentation

unsigned short int L1MuDTEUX::address ( ) const

inline

return extrapolation address (0-11) (address = 15 indicates negative ext. result)

Definition at line 97 of file L1MuDTEUX.h.

References m_address, and sec_mod().

Referenced by operator==().

{ return m_address; }

int L1MuDTEUX::id ( void  ) const

inline

return Extrapolation identifier

Definition at line 88 of file L1MuDTEUX.h.

References m_id.

Referenced by operator==().

{ return m_id; }

void L1MuDTEUX::load	(	const L1MuDTTrackSegPhi *	start_ts,
		const L1MuDTTrackSegPhi *	target_ts
	)

load data into EUX

Definition at line 193 of file L1MuDTEUX.cc.

References EX21, EX34, L1MuDTSEU::ext(), m_seu, m_start, and m_target.

                                                         {

  m_start  = start_ts;
  m_target = target_ts;

  // in case of EX34 and EX21 exchange start and target
  if ( ( m_seu.ext() == EX34 ) || ( m_seu.ext() == EX21 ) ) {
    m_start  = target_ts;
    m_target = start_ts;
  }

}

bool L1MuDTEUX::operator==

(

const L1MuDTEUX &

eux

)

const

equal operator

Definition at line 76 of file L1MuDTEUX.cc.

References address(), id(), m_address, m_id, m_quality, m_result, quality(), and result().

                                                     {

  if ( m_id      != eux.id() )      return false;
  if ( m_result  != eux.result() )  return false;
  if ( m_quality != eux.quality() ) return false;
  if ( m_address != eux.address() ) return false;
  return true;

}

unsigned int L1MuDTEUX::quality ( void  ) const

inline

return extrapolation quality

Definition at line 94 of file L1MuDTEUX.h.

References m_quality.

Referenced by L1MuDTEUX::EUX_Comp::operator()(), and operator==().

{ return m_quality; }

void L1MuDTEUX::reset ( void  )

virtual

reset Extrapolator

Implements L1AbstractProcessor.

Definition at line 212 of file L1MuDTEUX.cc.

References m_address, m_quality, m_result, m_start, and m_target.

                      {
  
  m_result  = false;
  m_quality = 0;
  m_address = 15;

  m_start  = 0;
  m_target = 0;

}

bool L1MuDTEUX::result ( ) const

inline

return extrapolation result

Definition at line 91 of file L1MuDTEUX.h.

References m_result.

Referenced by L1MuDTEUX::EUX_Comp::operator()(), and operator==().

{ return m_result; }

void L1MuDTEUX::run ( const edm::EventSetup &  c )

virtual

run Extrapolator

Reimplemented from L1AbstractProcessor.

Definition at line 90 of file L1MuDTEUX.cc.

References funct::abs(), L1MuDTTrackFinder::config(), gather_cfg::cout, L1MuDTTFConfig::Debug(), mps_update::diff, EX12, EX13, EX14, EX15, EX21, EX23, EX24, EX25, EX34, L1MuDTSEU::ext(), edm::EventSetup::get(), L1MuDTTFParameters::get_soc_openlut_extr(), L1MuDTTFParameters::get_soc_qcut_st1(), L1MuDTTFParameters::get_soc_qcut_st2(), L1MuDTTFParameters::get_soc_qcut_st4(), L1MuDTExtLut::getHigh(), L1MuDTExtLut::getLow(), L1MuDTTFConfig::getopenLUTs(), L1MuDTSectorProcessor::id(), m_address, m_id, m_quality, m_result, m_seu, m_sp, m_start, m_target, nbit_phi, nbit_phib, PFRecoTauDiscriminationByIsolation_cfi::offset, pars, L1MuDTTrackSegPhi::phi(), L1MuDTTrackSegPhi::phib(), L1MuDTTrackSegPhi::quality(), sec_mod(), L1MuDTSecProcId::sector(), L1MuDTTrackSegPhi::sector(), L1MuDTSectorProcessor::tf(), theExtLUTs, L1MuDTSecProcId::wheel(), and L1MuDTTrackSegPhi::wheel().

                                          {

  c.get< L1MuDTExtLutRcd >().get( theExtLUTs );
  c.get< L1MuDTTFParametersRcd >().get( pars );

  const bool debug4 = m_sp.tf().config()->Debug(4);
  if ( debug4 ) cout << "Run EUX "  << m_id << endl;
  if ( debug4 ) cout << "start :  " << *m_start  << endl;
  if ( debug4 ) cout << "target : " << *m_target << endl;

  if ( m_start == 0 || m_target == 0 ) { 
    if ( debug4 ) cout << "Error: EUX has no data loaded" << endl;
    return;
  }

  // start sector
  int sector_st = m_start->sector();

  // target sector
  int sector_ta = m_target->sector();

  // get index of look-up table
  int lut_idx = m_seu.ext();
  if ( abs(m_target->wheel()) == 3 ) {

    switch ( m_seu.ext() ) {
      case EX13 : { lut_idx = EX15; break; }
      case EX23 : { lut_idx = EX25; break; }
      default   : { lut_idx = m_seu.ext(); break; }
    }

  }

  if ( m_sp.tf().config()->Debug(5) ) cout << "EUX : using look-up table : "
                                       << static_cast<Extrapolation>(lut_idx)
                                       << endl;

  // Extrapolation TS quality filter
  int qcut = 0;
  if ( m_seu.ext() == EX12 ) qcut = pars->get_soc_qcut_st1(m_sp.id().wheel(), m_sp.id().sector());
  if ( m_seu.ext() == EX13 ) qcut = pars->get_soc_qcut_st1(m_sp.id().wheel(), m_sp.id().sector());
  if ( m_seu.ext() == EX14 ) qcut = pars->get_soc_qcut_st1(m_sp.id().wheel(), m_sp.id().sector());
  if ( m_seu.ext() == EX21 ) qcut = pars->get_soc_qcut_st2(m_sp.id().wheel(), m_sp.id().sector());
  if ( m_seu.ext() == EX23 ) qcut = pars->get_soc_qcut_st2(m_sp.id().wheel(), m_sp.id().sector());
  if ( m_seu.ext() == EX24 ) qcut = pars->get_soc_qcut_st2(m_sp.id().wheel(), m_sp.id().sector());
  if ( m_seu.ext() == EX34 ) qcut = pars->get_soc_qcut_st4(m_sp.id().wheel(), m_sp.id().sector());

  if ( m_start->quality() < qcut ) return;
  
  // calculate bit shift
  int sh_phi  = 12 - nbit_phi;
  int sh_phib = 10 - nbit_phib;

  int phi_target = m_target->phi() >> sh_phi;
  int phi_start  = m_start->phi()  >> sh_phi;
  int phib_start = (m_start->phib() >> sh_phib) << sh_phib;
  if ( phib_start < 0 ) phib_start += (1 << sh_phib) -1;

  // compute difference in phi
  int diff = phi_target - phi_start;

  // get low and high values from look-up table 
  // and add offset (30 degrees ) for extrapolation to adjacent sector 
  int offset = -2144 >> sh_phi;
  offset  *= sec_mod(sector_ta - sector_st);
  int low  = theExtLUTs->getLow(lut_idx,phib_start );
  int high = theExtLUTs->getHigh(lut_idx,phib_start );
  if ( low  < 0 ) low  += (1 << sh_phi) - 1;
  if ( high < 0 ) high += (1 << sh_phi) - 1;
  low  = (low  >> sh_phi) + offset;
  high = (high >> sh_phi) + offset;

  int phi_offset = phi_target - offset;
  if ( ( lut_idx == EX34 ) || ( lut_idx == EX21 ) )
    phi_offset = phi_start + offset;
  if ( phi_offset >= (1 << (nbit_phi-1)) -1 ) return;
  if ( phi_offset < -(1 << (nbit_phi-1)) +1 ) return;

  // is phi-difference within the extrapolation window?
  bool openlut = pars->get_soc_openlut_extr(m_sp.id().wheel(), m_sp.id().sector());
  if (( diff >= low && diff <= high ) || m_sp.tf().config()->getopenLUTs() || openlut ) {
    m_result = true;
    int qual_st = m_start->quality();
    int qual_ta = m_target->quality();
    if ( m_seu.ext() == EX34 || m_seu.ext() == EX21 ) {
      m_quality = ( qual_st == 7 ) ? 0 : qual_st + 1;
    } 
    else {  
      m_quality = ( qual_ta == 7 ) ? 0 : qual_ta + 1;
    }
    m_address = m_id;
  }

  if ( m_sp.tf().config()->Debug(5) ) cout << "diff : "   << low  << " "
                                       << diff << " " << high << " : "
                                       << m_result << " " << endl;

}

int L1MuDTEUX::sec_mod ( int  sector ) const

private

output sector numbers in the range -6 to +5

Definition at line 238 of file L1MuDTEUX.cc.

Referenced by address(), and run().

                                       {

  int new_sector = sector%12;
  if ( new_sector >= 6 )
    new_sector = new_sector - 12;
  if ( new_sector < -6 )
    new_sector = new_sector + 12;
   
  return new_sector;

}

pair< const L1MuDTTrackSegPhi *,const L1MuDTTrackSegPhi * > L1MuDTEUX::ts

(

)

const

return pointer to start and target track segment

Definition at line 227 of file L1MuDTEUX.cc.

References m_start, and m_target.

                                                                             {

  return pair<const L1MuDTTrackSegPhi*, const L1MuDTTrackSegPhi*>(m_start,m_target);

}

Member Data Documentation

unsigned short int L1MuDTEUX::m_address

private

Definition at line 112 of file L1MuDTEUX.h.

Referenced by address(), operator==(), reset(), and run().

int L1MuDTEUX::m_id

private

Definition at line 108 of file L1MuDTEUX.h.

Referenced by id(), operator==(), and run().

unsigned short int L1MuDTEUX::m_quality

private

Definition at line 111 of file L1MuDTEUX.h.

Referenced by operator==(), quality(), reset(), and run().

bool L1MuDTEUX::m_result

private

Definition at line 110 of file L1MuDTEUX.h.

Referenced by operator==(), reset(), result(), and run().

const L1MuDTSEU& L1MuDTEUX::m_seu

private

Definition at line 107 of file L1MuDTEUX.h.

Referenced by load(), and run().

const L1MuDTSectorProcessor& L1MuDTEUX::m_sp

private

Definition at line 106 of file L1MuDTEUX.h.

Referenced by run().

const L1MuDTTrackSegPhi* L1MuDTEUX::m_start

private

Definition at line 114 of file L1MuDTEUX.h.

Referenced by load(), reset(), run(), and ts().

const L1MuDTTrackSegPhi* L1MuDTEUX::m_target

private

Definition at line 115 of file L1MuDTEUX.h.

Referenced by load(), reset(), run(), and ts().

unsigned short const L1MuDTEUX::nbit_phi = 12

private

Definition at line 119 of file L1MuDTEUX.h.

Referenced by run().

unsigned short const L1MuDTEUX::nbit_phib = 10

private

Definition at line 120 of file L1MuDTEUX.h.

Referenced by run().

edm::ESHandle< L1MuDTTFParameters > L1MuDTEUX::pars

private

Definition at line 122 of file L1MuDTEUX.h.

Referenced by run().

int const L1MuDTEUX::theExtFilter = 1

private

Definition at line 118 of file L1MuDTEUX.h.

edm::ESHandle< L1MuDTExtLut > L1MuDTEUX::theExtLUTs

private

Definition at line 117 of file L1MuDTEUX.h.

Referenced by run().