L1GctHardwareJetFinder Class Reference

Emulation of the hardware jet finder. More...

#include <L1GctHardwareJetFinder.h>

Inheritance diagram for L1GctHardwareJetFinder:

Public Member Functions
virtual void	fetchInput ()
	get input data from sources More...
	L1GctHardwareJetFinder (int id)
	id is 0-8 for -ve Eta jetfinders, 9-17 for +ve Eta, for increasing Phi. More...
virtual void	process ()
	process the data, fill output buffers More...
virtual void	reset ()
	include additional reset functionality More...
	~L1GctHardwareJetFinder ()
Public Member Functions inherited from L1GctJetFinderBase
unsigned	getCenJetSeed () const
unsigned	getEtaBoundry () const
etTotalType	getEtSum () const
	Get the scalar sum of Et summed over the input regions. More...
etCompInternJfType	getExSum () const
	Get the x component of vector Et summed over the input regions. More...
etCompInternJfType	getEySum () const
	Get the y component of vector Et summed over the input regions. More...
unsigned	getFwdJetSeed () const
hfTowerSumsType	getHfSums () const
	Get the Hf tower Et sums and tower-over-threshold counts. More...
unsigned	getHtmSumJetThreshold () const
etHadType	getHtSum () const
	Get the scalar sum of Ht summed over jets above threshold. More...
unsigned	getHttSumJetThreshold () const
htCompInternJfType	getHxSum () const
	Get the x component of vector Ht summed over jets above threshold. More...
htCompInternJfType	getHySum () const
	Get the y component of vector Ht summed over jets above threshold. More...
RegionsVector	getInputRegions () const
	Return input data. More...
std::vector< L1GctInternEtSum >	getInternalEtSums () const
	get et sums in raw format - to be stored in the event More...
std::vector< L1GctInternHtMiss >	getInternalHtMiss () const
std::vector< L1GctInternJetData >	getInternalJets () const
	get output jets in raw format - to be stored in the event More...
const lutPtrVector	getJetEtCalLuts () const
	Return pointers to calibration LUTs. More...
JetVector	getJets () const
	Get the located jets. More...
RegionsVector	getKeptProtoJets () const
	get protoJets kept More...
RawJetVector	getRawJets () const
	get output jets in raw format More...
RegionsVector	getRcvdProtoJets () const
	get protoJets received from neighbour More...
RegionsVector	getSentProtoJets () const
	get protoJets sent to neighbour More...
unsigned	getTauIsolationThreshold () const
unsigned	getTauJetSeed () const
	L1GctJetFinderBase (int id)
	id is 0-8 for -ve Eta jetfinders, 9-17 for +ve Eta, for increasing Phi. More...
void	setEnergySumMasks (const L1GctChannelMask *chmask)
	Set masks for energy summing. More...
void	setInputRegion (const L1CaloRegion &region)
	Set input data. More...
void	setJetEtCalibrationLuts (const lutPtrVector &jfluts)
	Set pointer to calibration Lut - needed to complete the setup. More...
void	setJetFinderParams (const L1GctJetFinderParams *jfpars)
	Set pointer to parameters - needed to complete the setup. More...
void	setNeighbourJetFinders (const std::vector< L1GctJetFinderBase * > &neighbours)
	Set pointers to neighbours - needed to complete the setup. More...
bool	setupOk () const
	Check setup is Ok. More...
void	setupTauAlgo (const bool useImprovedAlgo, const bool ignoreVetoBitsForIsolation)
	Setup the tau algorithm parameters. More...
	~L1GctJetFinderBase ()
Public Member Functions inherited from L1GctProcessor
	L1GctProcessor ()
void	reset ()
	complete reset of processor More...
void	setBxRange (const int firstBx, const int numberOfBx)
	define the bunch crossing range to process More...
void	setNextBx (const int bxnum)
	clear input data buffers and process a new bunch crossing More...
void	setTerse ()
bool	setupOk () const
	Method to check the setup for this processor. Returns true by default. More...
void	setVerbose ()
	control output messages More...
virtual	~L1GctProcessor ()

Protected Member Functions
virtual unsigned	centralCol0 () const
virtual unsigned	maxRegionsIn () const
virtual unsigned	nCols () const
Protected Member Functions inherited from L1GctJetFinderBase
etTotalType	calcEtStrip (const UShort strip) const
	Calculates total (raw) energy in a phi strip. More...
hfTowerSumsType	calcHfSums () const
	Calculates Et sum and number of towers over threshold in Hf. More...
etTotalType	calcHtStrip (const UShort strip) const
	Calculates total calibrated energy in jets (Ht) sum. More...
void	doEnergySums ()
	Fill the Et strip sums and Ht sum. All jetFinders should call this in process(). More...
void	doEtSums ()
	Calculates scalar and vector sum of Et over input regions. More...
void	doHtSums ()
	Calculates scalar and vector sum of Ht over calibrated jets. More...
void	fetchProtoJetsFromNeighbour (const fetchType ft)
	fetch the protoJets from neighbour jetFinder More...
virtual void	resetPipelines ()
virtual void	resetProcessor ()
	Separate reset methods for the processor itself and any data stored in pipelines. More...
virtual void	setupObjects ()
	Initialise inputs with null objects for the correct bunch crossing if required. More...
void	sortJets ()
	Sort the found jets. All jetFinders should call this in process(). More...
Protected Member Functions inherited from L1GctProcessor
int	bxAbs () const
int	bxMax () const
int	bxMin () const
	Support for multiple beam crossing operation. More...
int	bxRel () const
int	numOfBx () const

Private Member Functions
void	convertClustersToOutputJets ()
	Organise the final clustered jets into L1GctJets. More...
void	convertClustersToProtoJets ()
	Organise the pre-clustered jets into the ones we keep and those we send to the neighbour. More...
void	findFinalClusters ()
	Convert protojets to final jets. More...
void	findJets ()
	The second stage of clustering, called by process() More...
void	findLocalMaxima ()
	Find local maxima in the search array. More...
void	findProtoClusters ()
	Convert local maxima to clusters. More...
void	findProtoJets ()
	The first stage of clustering, called by fetchInput() More...
L1GctRegion	makeProtoJet (L1GctRegion localMax)
	Method to make a single proto-jet. More...

Private Attributes
RegionsVector	m_cluster00
RegionsVector	m_clusters
	Each local maximum becomes a cluster. More...
RegionsVector	m_localMax00
RegionsVector	m_localMaxima
	Local vectors used during both stages of clustering. More...
unsigned	m_numberOfClusters
	The number of local Maxima/clusters found at each stage of clustering. More...

Static Private Attributes
static const unsigned int	CENTRAL_COL0 = 0
static const unsigned int	MAX_REGIONS_IN = (((L1CaloRegionDetId::N_ETA)/2)+N_EXTRA_REGIONS_ETA00)*L1GctHardwareJetFinder::N_COLS
	The real jetFinders must define these constants. More...
static const unsigned int	N_COLS = 2

Friends
std::ostream &	operator<< (std::ostream &os, const L1GctHardwareJetFinder &algo)
	Overload << operator. More...

Additional Inherited Members
Public Types inherited from L1GctJetFinderBase
typedef L1GctTwosComplement< L1GctInternEtSum::kJetMissEtNBits >	etCompInternJfType
typedef L1GctUnsignedInt< L1GctInternEtSum::kTotEtOrHtNBits >	etHadType
typedef L1GctUnsignedInt< L1GctInternEtSum::kTotEtOrHtNBits >	etTotalType
typedef L1GctTwosComplement< L1GctInternHtMiss::kJetMissHtNBits >	htCompInternJfType
typedef std::vector< L1GctJetCand >	JetVector
typedef L1GctJet::lutPtr	lutPtr
typedef std::vector< lutPtr >	lutPtrVector
enum	maxValues { etTotalMaxValue = L1GctInternEtSum::kTotEtOrHtMaxValue, htTotalMaxValue = L1GctInternEtSum::kTotEtOrHtMaxValue }
typedef Pipeline< L1GctJet >	RawJetPipeline
typedef std::vector< L1GctJet >	RawJetVector
typedef std::vector< L1GctRegion >	RegionsVector
typedef unsigned long int	ULong
typedef unsigned short int	UShort
Static Public Attributes inherited from L1GctJetFinderBase
static const unsigned int	COL_OFFSET = L1GctJetFinderParams::NUMBER_ETA_VALUES+N_EXTRA_REGIONS_ETA00
	The index offset between columns. More...
static const unsigned int	MAX_JETS_OUT = 6
	Max of 6 jets found per jetfinder in a 2*11 search area. More...
static const unsigned int	N_EXTRA_REGIONS_ETA00 = 2
	Number of additional regions to process on the "wrong" side of eta=0 (determines COL_OFFSET) More...
static const unsigned int	N_JF_PER_WHEEL = ((L1CaloRegionDetId::N_PHI)/2)
	No of jetFinders per Wheel. More...
Protected Types inherited from L1GctJetFinderBase
enum	fetchType { TOP, BOT, TOPBOT }
	different ways of getting the neighbour data More...
Protected Attributes inherited from L1GctJetFinderBase
unsigned	m_CenJetSeed
unsigned	m_EtaBoundry
bool	m_EtmMask [11]
bool	m_EttMask [11]
unsigned	m_FwdJetSeed
bool	m_gotChannelMask
	Remember whether channel mask have been stored. More...
bool	m_gotJetEtCalLuts
	Remember whether jet Et calibration Lut pointers have been stored. More...
bool	m_gotJetFinderParams
	Remember whether jetfinder parameters have been stored. More...
bool	m_gotNeighbourPointers
	Remember whether the neighbour pointers have been stored. More...
bool	m_HtmMask [11]
unsigned	m_HtmSumJetThreshold
bool	m_HttMask [11]
unsigned	m_HttSumJetThreshold
int	m_id
	algo ID More...
bool	m_idInRange
	Remember whether range check on the input ID was ok. More...
bool	m_ignoreTauVetoBitsForIsolation
RegionsVector	m_inputRegions
lutPtrVector	m_jetEtCalLuts
	Jet Et Conversion LUT pointer. More...
RegionsVector	m_keptProtoJets
	List of pre-clustered jets retained locally as input to the final clustering. More...
unsigned	m_minColThisJf
	parameter to determine which Regions belong in our acceptance More...
std::vector< L1GctJetFinderBase * >	m_neighbourJetFinders
	Store neighbour pointers. More...
etTotalType	m_outputEtSum
	output Et strip sums and Ht - refactored More...
etCompInternJfType	m_outputExSum
etCompInternJfType	m_outputEySum
hfTowerSumsType	m_outputHfSums
etHadType	m_outputHtSum
htCompInternJfType	m_outputHxSum
htCompInternJfType	m_outputHySum
RawJetVector	m_outputJets
	output jets More...
bool	m_positiveEtaWheel
RegionsVector	m_rcvdProtoJets
	List of pre-clustered jets received from neighbour before the final stage of clustering. More...
RegionsVector	m_sentProtoJets
	List of pre-clustered jets to be sent to neighbour after the first stage of clustering. More...
JetVector	m_sortedJets
unsigned	m_tauIsolationThreshold
unsigned	m_TauJetSeed
bool	m_useImprovedTauAlgo
	Setup parameters for the tau jet algorithm. More...
Protected Attributes inherited from L1GctProcessor
bool	m_verbose
	Flag to control output messages. More...

Detailed Description

Emulation of the hardware jet finder.

Definition at line 21 of file L1GctHardwareJetFinder.h.

Constructor & Destructor Documentation

L1GctHardwareJetFinder::L1GctHardwareJetFinder

(

int

id

)

id is 0-8 for -ve Eta jetfinders, 9-17 for +ve Eta, for increasing Phi.

Definition at line 8 of file L1GctHardwareJetFinder.cc.

References CENTRAL_COL0, L1GctJetFinderBase::m_id, L1GctJetFinderBase::m_minColThisJf, L1CaloRegionDetId::N_PHI, and reset().

                                                    :
  L1GctJetFinderBase(id),
  m_localMaxima     (MAX_JETS_OUT),
  m_clusters        (MAX_JETS_OUT),
  m_numberOfClusters(0),
  m_localMax00(2),
  m_cluster00 (2)
{
  this->reset();
  // Initialise parameters for Region input calculations in the 
  // derived class so we get the right values of constants.
  static const unsigned NPHI = L1CaloRegionDetId::N_PHI;
  m_minColThisJf = (NPHI + m_id*2 - CENTRAL_COL0) % NPHI;
}

L1GctHardwareJetFinder::~L1GctHardwareJetFinder

(

)

Definition at line 23 of file L1GctHardwareJetFinder.cc.

{
}

Member Function Documentation

virtual unsigned L1GctHardwareJetFinder::centralCol0 ( ) const

inlineprotectedvirtual

Reimplemented from L1GctJetFinderBase.

Definition at line 47 of file L1GctHardwareJetFinder.h.

References CENTRAL_COL0.

Referenced by findFinalClusters(), and findLocalMaxima().

{ return CENTRAL_COL0; }

void L1GctHardwareJetFinder::convertClustersToOutputJets ( )

private

Organise the final clustered jets into L1GctJets.

Definition at line 434 of file L1GctHardwareJetFinder.cc.

References ecaldqm::isForward(), L1GctJetFinderBase::m_CenJetSeed, m_clusters, L1GctJetFinderBase::m_EtaBoundry, L1GctJetFinderBase::m_FwdJetSeed, L1GctJetFinderBase::m_outputJets, L1GctJetFinderBase::MAX_JETS_OUT, and groupFilesInBlocks::temp.

Referenced by findJets().

{
  for (unsigned j=0; j<MAX_JETS_OUT; ++j) {
    bool isForward = (m_clusters.at(j).rctEta()>=m_EtaBoundry);
    unsigned JET_THRESHOLD = ( isForward ? m_FwdJetSeed : m_CenJetSeed);
    if (m_clusters.at(j).et()>=JET_THRESHOLD) {
      L1GctJet temp(m_clusters.at(j).et(), m_clusters.at(j).gctEta(), m_clusters.at(j).gctPhi(), 
                    m_clusters.at(j).overFlow(), isForward, m_clusters.at(j).tauVeto(), m_clusters.at(j).bx());
      m_outputJets.at(j) = temp;
    }
  }
}

void L1GctHardwareJetFinder::convertClustersToProtoJets ( )

private

Organise the pre-clustered jets into the ones we keep and those we send to the neighbour.

Definition at line 421 of file L1GctHardwareJetFinder.cc.

References ecaldqm::isForward(), L1GctJetFinderBase::m_CenJetSeed, m_clusters, L1GctJetFinderBase::m_EtaBoundry, L1GctJetFinderBase::m_FwdJetSeed, L1GctJetFinderBase::m_keptProtoJets, L1GctJetFinderBase::m_sentProtoJets, and L1GctJetFinderBase::MAX_JETS_OUT.

Referenced by findProtoJets().

{
  for (unsigned j=0; j<MAX_JETS_OUT; ++j) {
    bool isForward = (m_clusters.at(j).rctEta()>=m_EtaBoundry);
    unsigned JET_THRESHOLD = ( isForward ? m_FwdJetSeed : m_CenJetSeed);
    if (m_clusters.at(j).et()>=JET_THRESHOLD) {
      m_keptProtoJets.at(j) = m_clusters.at(j);
      m_sentProtoJets.at(j) = m_clusters.at(j);
    }
  }
}

void L1GctHardwareJetFinder::fetchInput ( )

virtual

get input data from sources

Implements L1GctJetFinderBase.

Definition at line 40 of file L1GctHardwareJetFinder.cc.

References findProtoJets(), and L1GctJetFinderBase::setupOk().

{
  if (setupOk()) {
    findProtoJets();
  }
}

void L1GctHardwareJetFinder::findFinalClusters ( )

private

Convert protojets to final jets.

Definition at line 322 of file L1GctHardwareJetFinder.cc.

References centralCol0(), L1GctJetFinderBase::COL_OFFSET, stringResolutionProvider_cfi::eta, diffTreeTool::index, GlobalTrackerMuonAlignment_cfi::isolated, gen::k, L1GctJetFinderBase::m_CenJetSeed, m_cluster00, m_clusters, L1GctJetFinderBase::m_EtaBoundry, L1GctJetFinderBase::m_FwdJetSeed, L1GctJetFinderBase::m_ignoreTauVetoBitsForIsolation, L1GctJetFinderBase::m_inputRegions, L1GctJetFinderBase::m_keptProtoJets, L1GctJetFinderBase::m_rcvdProtoJets, L1GctJetFinderBase::m_tauIsolationThreshold, L1GctJetFinderBase::m_useImprovedTauAlgo, L1GctRegion::makeFinalJetRegion(), L1GctJetFinderBase::MAX_JETS_OUT, L1GctJetFinderBase::N_EXTRA_REGIONS_ETA00, phi, and groupFilesInBlocks::temp.

Referenced by findJets().

{
  m_clusters.clear();
  m_clusters.resize(MAX_JETS_OUT);

  // Loop over proto-jets received from neighbours.
  // Form a jet to send to the output if there is no proto-jet nearby in the
  // list of jets found locally. If local jets are found nearby, form a jet
  // if the received jet has higher Et than any one of the local ones.
  for (unsigned j=0; j<MAX_JETS_OUT; ++j) {
    unsigned et0       = m_rcvdProtoJets.at(j).et();
    unsigned localEta0 = m_rcvdProtoJets.at(j).rctEta();
    unsigned localPhi0 = m_rcvdProtoJets.at(j).rctPhi();
    unsigned JET_THRESHOLD = ( (localEta0 >= m_EtaBoundry) ? m_FwdJetSeed : m_CenJetSeed);
    if (et0>=JET_THRESHOLD) {
        bool storeJet=false;
        bool isolated=true;
        // eta00 boundary check/veto
        if (localEta0==0) {
          unsigned neighbourEt=m_cluster00.at(1-localPhi0).et();
          isolated &= et0 >= neighbourEt;
        }
        // If the jet is NOT vetoed, look at the jets found locally (m_keptProtoJets).
        // We accept the jet if there are no local jets nearby, or if the local jet
        // (there should be no more than one) has lower Et.
        if (isolated) {
          for (unsigned k=0; k<MAX_JETS_OUT; ++k) {
            unsigned et1       = m_keptProtoJets.at(k).et();
            unsigned localEta1 = m_keptProtoJets.at(k).rctEta();
            unsigned localPhi1 = m_keptProtoJets.at(k).rctPhi();
            if (et1>0) {
              bool distantJet = ((localPhi0==localPhi1) ||
                               (localEta1 > localEta0+1) || (localEta0 > localEta1+1));

              isolated &=  distantJet;
              storeJet |= !distantJet && ((et0 > et1) || ((et0 == et1) && localPhi0==1));
            }
          }
        }

        storeJet |= isolated;

        if (storeJet) { 
            // Start with the et sum, tau veto and overflow flags of the protoJet (2x3 regions)
            unsigned etCluster = et0;
            bool ovrFlowOr = m_rcvdProtoJets.at(j).overFlow();
            bool tauVetoOr = m_rcvdProtoJets.at(j).tauVeto();
            unsigned rgnsAboveIsoThreshold = ( m_rcvdProtoJets.at(j).featureBit0() ? 1 : 0);

            // Combine with the corresponding regions from
            // the local array to make a 3x3 jet cluster 
            unsigned column=1-localPhi0;
            // Which rows are we looking over?
            unsigned rowStart, rowEnd;
            static const unsigned row0 = N_EXTRA_REGIONS_ETA00 - 1;
            rowStart = row0 + localEta0;
            if (localEta0 < COL_OFFSET - row0 - 2) {
              rowEnd = rowStart + 3;
            } else {
              rowEnd = COL_OFFSET;
            }
            unsigned index = COL_OFFSET*(this->centralCol0()+column) + rowStart;
              for (unsigned row=rowStart; row<rowEnd; ++row) {
                etCluster += m_inputRegions.at(index).et();
                ovrFlowOr |= m_inputRegions.at(index).overFlow();
                if (m_useImprovedTauAlgo) {
                  if (!m_ignoreTauVetoBitsForIsolation) {
                    tauVetoOr |= m_inputRegions.at(index).tauVeto();
                  }
                  // check the region energy against the isolation threshold
                  if (m_inputRegions.at(index).et() >= m_tauIsolationThreshold) {
                    rgnsAboveIsoThreshold++;
                  }
                } else {
                  tauVetoOr |= m_inputRegions.at(index).tauVeto();
                }

                ++index;
              }

            // Store the new jet
            unsigned eta = m_rcvdProtoJets.at(j).gctEta();
            unsigned phi = m_rcvdProtoJets.at(j).gctPhi();
            int16_t  bx  = m_rcvdProtoJets.at(j).bx();

            // Use the number of towers over threshold for the isolated tau algorithm
            if (m_useImprovedTauAlgo) {
              tauVetoOr     |= (rgnsAboveIsoThreshold  > 1);
            }

            L1GctRegion temp(L1GctRegion::makeFinalJetRegion(etCluster, ovrFlowOr, tauVetoOr, eta, phi, bx));
            m_clusters.at(j) = temp;

        }
    }
  }
}

void L1GctHardwareJetFinder::findJets ( )

private

The second stage of clustering, called by process()

Definition at line 68 of file L1GctHardwareJetFinder.cc.

References convertClustersToOutputJets(), and findFinalClusters().

Referenced by process().

{
  findFinalClusters();
  convertClustersToOutputJets();
}

void L1GctHardwareJetFinder::findLocalMaxima ( )

private

Find local maxima in the search array.

Both clustering stages need to find local maxima in the search array.

Definition at line 76 of file L1GctHardwareJetFinder.cc.

References centralCol0(), L1GctJetFinderBase::COL_OFFSET, L1GctJetFinderBase::m_CenJetSeed, L1GctJetFinderBase::m_EtaBoundry, L1GctJetFinderBase::m_FwdJetSeed, L1GctJetFinderBase::m_inputRegions, m_localMax00, m_localMaxima, m_numberOfClusters, L1GctJetFinderBase::m_positiveEtaWheel, L1GctJetFinderBase::MAX_JETS_OUT, and phi.

Referenced by findProtoJets().

{
  m_localMaxima.clear();
  m_localMaxima.resize(MAX_JETS_OUT);
  m_localMax00.clear();
  m_localMax00.resize(2);

  UShort jetNum = 0; //holds the number of jets currently found
  UShort centreIndex = COL_OFFSET*this->centralCol0();
  for(UShort column = 0; column <2; ++column)  //Find jets in the central search region
  {
    // The input regions include two extra bins on the other side of eta=0. This allows "seamless" 
    // jetfinding across the eta=0 boundary. We skip the first input region in each row. We perform 
    // the full pre-clustering on the next region but store the resulting clusters separately
    // from the main list of output pre-clusters - they will be used in the final cluster stage to
    // make sure we do not produce jets in adjacent regions on opposite sides of eta=0. 
    ++centreIndex;
    for (UShort row = 1; row < COL_OFFSET; ++row)  
    {
      // Here's the array of greater-than and greater-or-equal tests
      // to ensure each localMaximum appears once and only once in the list
      // It is different for forward and backward eta.
      unsigned JET_THRESHOLD = ( (row > m_EtaBoundry) ? m_FwdJetSeed : m_CenJetSeed);
      bool localMax = !m_inputRegions.at(centreIndex).empty() && (m_inputRegions.at(centreIndex).et()>=JET_THRESHOLD);
      if (m_positiveEtaWheel) {      // Forward eta
    localMax     &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex-1).et());
        if (row < (COL_OFFSET-1)) {
      localMax   &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex+1).et());
        }
        if (column==0) {
      localMax   &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex+COL_OFFSET).et());
      localMax   &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex+COL_OFFSET-1).et());
      if (row < (COL_OFFSET-1)) {
        localMax &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex+COL_OFFSET+1).et());
      }
        } else {
      localMax   &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex-COL_OFFSET).et());
      localMax   &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex-COL_OFFSET-1).et());
      if (row < (COL_OFFSET-1)) { 
        localMax &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex-COL_OFFSET+1).et());
      }
        }
      } else {      // Backward eta
    localMax     &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex-1).et());
        if (row < (COL_OFFSET-1)) {
      localMax   &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex+1).et());
        }
        if (column==0) {
      localMax   &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex+COL_OFFSET).et());
      localMax   &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex+COL_OFFSET-1).et());
      if (row < (COL_OFFSET-1)) {
        localMax &= (m_inputRegions.at(centreIndex).et() >= m_inputRegions.at(centreIndex+COL_OFFSET+1).et());
      }
        } else {
      localMax   &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex-COL_OFFSET).et());
      localMax   &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex-COL_OFFSET-1).et());
      if (row < (COL_OFFSET-1)) {
        localMax &= (m_inputRegions.at(centreIndex).et() >  m_inputRegions.at(centreIndex-COL_OFFSET+1).et());
      }
        }
      }
      if (localMax) {
    if (row>1) {
      if (jetNum < MAX_JETS_OUT) {
        m_localMaxima.at(jetNum) = m_inputRegions.at(centreIndex);
        ++jetNum;
      }
    } 
    // Treat row 1 as a separate case. It's not required for jetfinding but
    // is used for vetoing of jets double counted across the eta=0 boundary
    else {
      unsigned phi = m_inputRegions.at(centreIndex).rctPhi();
      m_localMax00.at(phi) = m_inputRegions.at(centreIndex);
    }
      }
      ++centreIndex;
    }
  }

  m_numberOfClusters = jetNum;
}

void L1GctHardwareJetFinder::findProtoClusters ( )

private

Convert local maxima to clusters.

Definition at line 161 of file L1GctHardwareJetFinder.cc.

References gen::k, m_cluster00, m_clusters, m_localMax00, m_localMaxima, m_numberOfClusters, makeProtoJet(), L1GctJetFinderBase::MAX_JETS_OUT, and groupFilesInBlocks::temp.

Referenced by findProtoJets().

{
  m_clusters.clear();
  m_clusters.resize(MAX_JETS_OUT);
  m_cluster00.clear();
  m_cluster00.resize(2);

  RegionsVector         topJets(MAX_JETS_OUT),         botJets(MAX_JETS_OUT);
  std::vector<unsigned> topJetsPosition(MAX_JETS_OUT), botJetsPosition(MAX_JETS_OUT);
  unsigned              numberOfTopJets=0,             numberOfBotJets=0;

  // Loop over local maxima
  for (unsigned j=0; j<m_numberOfClusters; ++j) {
    // Make a proto-jet cluster
    L1GctRegion temp = makeProtoJet(m_localMaxima.at(j));

    if (m_localMaxima.at(j).rctPhi()==0) {
    // Store "top edge" jets
      topJets.at(numberOfTopJets) = temp;
      topJetsPosition.at(numberOfTopJets) = 0;
      for (unsigned k=0; k<numberOfTopJets; ++k) {
        if (topJets.at(numberOfTopJets).et() >= topJets.at(k).et()) { ++topJetsPosition.at(k); }
        if (topJets.at(numberOfTopJets).et() <= topJets.at(k).et()) { ++topJetsPosition.at(numberOfTopJets); }
      }
      ++numberOfTopJets;
    } else {
    // Store "bottom edge" jets
      botJets.at(numberOfBotJets) = temp;
      botJetsPosition.at(numberOfBotJets) = 0;
      for (unsigned k=0; k<numberOfBotJets; ++k) {
        if (botJets.at(numberOfBotJets).et() >= botJets.at(k).et()) { ++botJetsPosition.at(k); }
        if (botJets.at(numberOfBotJets).et() <= botJets.at(k).et()) { ++botJetsPosition.at(numberOfBotJets); }
      }
      ++numberOfBotJets;
    }
  }
  // Now we've found all the proto-jets, copy the best ones to the output array
  //
  // We fill the first half of the array with "bottom jets"
  // and the remainder with "top jets". For cases where
  // we have found too many jets in one phi column,
  // we keep those with the highest Et.
  static const unsigned int MAX_TOPBOT_JETS = MAX_JETS_OUT/2;
  unsigned pos=0;
  for (unsigned j=0; j<numberOfBotJets; ++j) {
    if (botJetsPosition.at(j)<MAX_TOPBOT_JETS) {
      m_clusters.at(pos++) = botJets.at(j);
    }
  }
  pos=MAX_TOPBOT_JETS;
  for (unsigned j=0; j<numberOfTopJets; ++j) {
    if (topJetsPosition.at(j)<MAX_TOPBOT_JETS) {
      m_clusters.at(pos++) = topJets.at(j);
    }
  }
  // Finally, deal with eta00 maxima
  if (!m_localMax00.at(0).empty()) m_cluster00.at(0) = makeProtoJet(m_localMax00.at(0));  
  if (!m_localMax00.at(1).empty()) m_cluster00.at(1) = makeProtoJet(m_localMax00.at(1));
}

void L1GctHardwareJetFinder::findProtoJets ( )

private

The first stage of clustering, called by fetchInput()

HERE IS THE JETFINDER CODE.

The first stage of clustering, called by fetchInput()

Definition at line 60 of file L1GctHardwareJetFinder.cc.

References convertClustersToProtoJets(), findLocalMaxima(), and findProtoClusters().

Referenced by fetchInput().

{
  findLocalMaxima();
  findProtoClusters();
  convertClustersToProtoJets();
}

L1GctRegion L1GctHardwareJetFinder::makeProtoJet ( L1GctRegion  localMax )

private

Method to make a single proto-jet.

Definition at line 223 of file L1GctHardwareJetFinder.cc.

References L1CaloRegion::bx(), L1GctJetFinderBase::COL_OFFSET, stringResolutionProvider_cfi::eta, L1CaloRegion::gctEta(), L1CaloRegion::gctPhi(), diffTreeTool::index, L1GctJetFinderBase::m_ignoreTauVetoBitsForIsolation, L1GctJetFinderBase::m_inputRegions, L1GctJetFinderBase::m_positiveEtaWheel, L1GctJetFinderBase::m_tauIsolationThreshold, L1GctJetFinderBase::m_useImprovedTauAlgo, L1GctRegion::makeProtoJetRegion(), L1CaloRegionDetId::N_ETA, L1GctJetFinderBase::N_EXTRA_REGIONS_ETA00, phi, L1GctRegion::rctEta(), L1CaloRegion::rctPhi(), and groupFilesInBlocks::temp.

Referenced by findProtoClusters().

                                                                     {
  unsigned eta = localMax.gctEta();
  unsigned phi = localMax.gctPhi();
  int16_t  bx  = localMax.bx();

  unsigned localEta = localMax.rctEta();
  unsigned localPhi = localMax.rctPhi();

  unsigned etCluster = 0;
  bool ovrFlowOr = false;
  bool tauVetoOr = false;
  unsigned rgnsAboveIsoThreshold = 0;

  // check for row00
  const unsigned midEta=(L1CaloRegionDetId::N_ETA)/2;
  bool wrongEtaWheel = ( (!m_positiveEtaWheel) && (eta>=midEta) ) || ( (m_positiveEtaWheel) && (eta<midEta) );

  // Which rows are we looking over?
  unsigned rowStart, rowEnd, rowMid;
  static const unsigned row0 = N_EXTRA_REGIONS_ETA00 - 1;
  if (wrongEtaWheel) {
    if (localEta > row0 - 1) {
      rowStart = 0;
      rowMid = 0;
    } else {
      rowStart = row0 - 1 - localEta;
      rowMid = rowStart + 1;
    }
    if (localEta > row0 + 2) { // Shouldn't happen, but big problems if it does
      rowEnd = 0;
    } else { 
      rowEnd   = row0 + 2 - localEta;
    }
  } else {
    rowStart = row0 + localEta;
    rowMid = rowStart + 1;
    if (localEta < COL_OFFSET - row0 - 2) {
      rowEnd = rowStart + 3;
    } else {
      rowEnd = COL_OFFSET;
    }
  }

  for (unsigned row=rowStart; row<rowEnd; ++row) {
    for (unsigned column=0; column<2; ++column) {
      unsigned index = column*COL_OFFSET + row;
      etCluster += m_inputRegions.at(index).et();
      ovrFlowOr |= m_inputRegions.at(index).overFlow();
      // Distinguish between central and tau-flagged jets. Two versions of the algorithm.
      if (m_useImprovedTauAlgo) {

//===========================================================================================
// "Old" version of improved tau algorithm tests the tau veto for the central region always
//  if ((row==(localEta+N_EXTRA_REGIONS_ETA00)) && (column==localPhi)) {
//    // central region - check the tau veto
//    tauVetoOr |= m_inputRegions.at(index).tauVeto();
//  } else {
//    // other regions - check the tau veto if required
//    if (!m_ignoreTauVetoBitsForIsolation) {
//      tauVetoOr |= m_inputRegions.at(index).tauVeto();
//    }
//    // check the region energy against the isolation threshold
//    if (m_inputRegions.at(index).et() >= m_tauIsolationThreshold) {
//      rgnsAboveIsoThreshold++;
//    }
//  }
//===========================================================================================

        // In the hardware, the ignoreTauVetoBitsForIsolation switch ignores all the veto bits,
        // including the one for the central region.
    if (!((row==rowMid) && (column==localPhi))) {
      // non-central region - check the region energy against the isolation threshold
      if (m_inputRegions.at(index).et() >= m_tauIsolationThreshold) {
        rgnsAboveIsoThreshold++;
      }
    }
    // all regions - check the tau veto if required
    if (!m_ignoreTauVetoBitsForIsolation) {
      tauVetoOr |= m_inputRegions.at(index).tauVeto();
    }
    // End of improved tau algorithm
      } else {
    // Original tau algorithm
    tauVetoOr |= m_inputRegions.at(index).tauVeto();
      }
    }
  }
  // Encode the number of towers over threshold for the isolated tau algorithm
  bool tauFeatureBit = false;
  if (m_useImprovedTauAlgo) {
    tauVetoOr     |= (rgnsAboveIsoThreshold  > 1);
    tauFeatureBit |= (rgnsAboveIsoThreshold == 1);
  }

  L1GctRegion temp(L1GctRegion::makeProtoJetRegion(etCluster, ovrFlowOr, tauVetoOr, tauFeatureBit, eta, phi, bx));
  return temp;
}

virtual unsigned L1GctHardwareJetFinder::maxRegionsIn ( ) const

inlineprotectedvirtual

*** End of event data ***

---

Reimplemented from L1GctJetFinderBase.

Definition at line 46 of file L1GctHardwareJetFinder.h.

References MAX_REGIONS_IN.

{ return MAX_REGIONS_IN; }

virtual unsigned L1GctHardwareJetFinder::nCols ( ) const

inlineprotectedvirtual

Reimplemented from L1GctJetFinderBase.

Definition at line 48 of file L1GctHardwareJetFinder.h.

References N_COLS.

{ return N_COLS; }

void L1GctHardwareJetFinder::process ( )

virtual

process the data, fill output buffers

Implements L1GctJetFinderBase.

Definition at line 47 of file L1GctHardwareJetFinder.cc.

References L1GctJetFinderBase::doEnergySums(), L1GctJetFinderBase::fetchProtoJetsFromNeighbour(), findJets(), L1GctJetFinderBase::setupOk(), L1GctJetFinderBase::sortJets(), and L1GctJetFinderBase::TOPBOT.

Referenced by ConfigBuilder.ConfigBuilder::addExtraStream(), ConfigBuilder.ConfigBuilder::completeInputCommand(), ConfigBuilder.ConfigBuilder::doNotInlineEventContent(), ConfigBuilder.ConfigBuilder.PrintAllModules::leave(), ConfigBuilder.ConfigBuilder::prepare(), ConfigBuilder.ConfigBuilder::prepare_ALCA(), ConfigBuilder.ConfigBuilder::prepare_DQM(), ConfigBuilder.ConfigBuilder::prepare_HLT(), ConfigBuilder.ConfigBuilder::prepare_LHE(), ConfigBuilder.ConfigBuilder::prepare_PATFILTER(), ConfigBuilder.ConfigBuilder::prepare_VALIDATION(), ConfigBuilder.ConfigBuilder::renameHLTprocessInSequence(), ConfigBuilder.ConfigBuilder::renameInputTagsInSequence(), and ConfigBuilder.ConfigBuilder::scheduleSequence().

{
  if (setupOk()) {
    fetchProtoJetsFromNeighbour(TOPBOT);
    findJets();
    sortJets();
    doEnergySums();
  }
}

void L1GctHardwareJetFinder::reset ( void  )

virtual

include additional reset functionality

Definition at line 35 of file L1GctHardwareJetFinder.cc.

References L1GctProcessor::reset().

Referenced by L1GctHardwareJetFinder().

{
  L1GctJetFinderBase::reset();
}

Friends And Related Function Documentation

std::ostream& operator<< ( std::ostream &  os, const L1GctHardwareJetFinder &  algo  )

friend

Overload << operator.

Definition at line 27 of file L1GctHardwareJetFinder.cc.

{
  os << "===L1GctHardwareJetFinder===" << std::endl;
  const L1GctJetFinderBase* temp = &algo;
  os << *temp;
  return os;
}

Member Data Documentation

const unsigned int L1GctHardwareJetFinder::CENTRAL_COL0 = 0

staticprivate

Definition at line 55 of file L1GctHardwareJetFinder.h.

Referenced by centralCol0(), and L1GctHardwareJetFinder().

RegionsVector L1GctHardwareJetFinder::m_cluster00

private

Definition at line 67 of file L1GctHardwareJetFinder.h.

Referenced by findFinalClusters(), and findProtoClusters().

RegionsVector L1GctHardwareJetFinder::m_clusters

private

Each local maximum becomes a cluster.

Definition at line 60 of file L1GctHardwareJetFinder.h.

Referenced by convertClustersToOutputJets(), convertClustersToProtoJets(), findFinalClusters(), and findProtoClusters().

RegionsVector L1GctHardwareJetFinder::m_localMax00

private

Definition at line 66 of file L1GctHardwareJetFinder.h.

Referenced by findLocalMaxima(), and findProtoClusters().

RegionsVector L1GctHardwareJetFinder::m_localMaxima

private

Local vectors used during both stages of clustering.

Definition at line 58 of file L1GctHardwareJetFinder.h.

Referenced by findLocalMaxima(), and findProtoClusters().

unsigned L1GctHardwareJetFinder::m_numberOfClusters

private

The number of local Maxima/clusters found at each stage of clustering.

Definition at line 63 of file L1GctHardwareJetFinder.h.

Referenced by findLocalMaxima(), and findProtoClusters().

const unsigned int L1GctHardwareJetFinder::MAX_REGIONS_IN = (((L1CaloRegionDetId::N_ETA)/2)+N_EXTRA_REGIONS_ETA00)*L1GctHardwareJetFinder::N_COLS

staticprivate

The real jetFinders must define these constants.

Dependent on number of rows and columns.

Definition at line 53 of file L1GctHardwareJetFinder.h.

Referenced by maxRegionsIn().

const unsigned int L1GctHardwareJetFinder::N_COLS = 2

staticprivate

Definition at line 54 of file L1GctHardwareJetFinder.h.

Referenced by nCols().