DDCutTubsFromPoints.cc

Go to the documentation of this file.

// File: DDCutTubsFromPoints.cc
// Description: Create a ring of CutTubs segments from points on the rim.

#include <cmath>
#include <string>

#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "DetectorDescription/Core/interface/DDCurrentNamespace.h"
#include "DetectorDescription/Core/interface/DDSolid.h"
#include "DetectorDescription/Core/interface/DDVector.h"
#include "Geometry/TrackerCommonData/plugins/DDCutTubsFromPoints.h"
#include "CLHEP/Units/GlobalPhysicalConstants.h"
#include "CLHEP/Units/GlobalSystemOfUnits.h"


DDCutTubsFromPoints::DDCutTubsFromPoints() {
  LogDebug("TrackerGeom") <<"DDCutTubsFromPoints info: Creating an instance";
}

DDCutTubsFromPoints::~DDCutTubsFromPoints() {}

void DDCutTubsFromPoints::initialize(const DDNumericArguments & nArgs,
                                   const DDVectorArguments & vArgs,
                                   const DDMapArguments & ,
                                   const DDStringArguments & sArgs,
                                   const DDStringVectorArguments &) {

  r_min = nArgs["rMin"];
  r_max = nArgs["rMax"];
  z_pos = nArgs["zPos"];
  material = DDMaterial(sArgs["Material"]);
  
  auto phis_name = DDName(sArgs["Phi"]);
  auto z_ls_name = DDName(sArgs["z_l"]);
  auto z_ts_name = DDName(sArgs["z_t"]);
  DDVector phis(phis_name);
  DDVector z_ls(z_ls_name);
  DDVector z_ts(z_ts_name);

  assert(phis.size() == z_ls.size());
  assert(phis.size() == z_ts.size());

  for (unsigned i = 0; i < phis.size(); i++) {
    Section s = {phis[i], z_ls[i], z_ts[i] };
    sections.push_back(s);
  }
  assert(sections.size() > 0);

  solidOutput = DDName(sArgs["SolidName"]);
  
  std::string idNameSpace = DDCurrentNamespace::ns();
  DDName parentName = parent().name();
  LogDebug("TrackerGeom") << "DDCutTubsFromPoints debug: Parent " << parentName
                          << "\tSolid " << solidOutput << " NameSpace " 
                          << idNameSpace 
                          << "\tnumber of sections " << sections.size();
}

static double square(double x) {
  return x*x;
}


void DDCutTubsFromPoints::execute(DDCompactView& cpv) {

  // radius for plane calculations
  // We use r_max here, since P3 later has a Z that is always more inside
  // than the extreme points. This means the cutting planes have outwards
  // slopes in r-Z, and the corner at r_max could stick out of the bounding
  // volume otherwise. 
  double r  = r_max;

  // min and max z for the placement in the end
  double min_z =  1e9;
  double max_z = -1e9;

  // counter of actually produced segments (excluding skipped ones)
  int segment = 0;

  // the segments and their corresponding offset (absolute, as in the input)
  std::vector<DDSolid> segments;
  std::vector<double>  offsets;
  
  Section s1 = sections[0];
  for (Section s2 : sections) {
    if (s1.phi != s2.phi) {
      segment++;
      // produce segment s1-s2.
      DDName segname  (solidOutput.name() + "_seg_" + std::to_string(segment), 
                       solidOutput.ns());

      double phi1 = s1.phi;
      double phi2 = s2.phi;

      // track the min/max to properly place&align later
      if (s2.z_l < min_z) min_z = s2.z_l;
      if (s2.z_t > max_z) max_z = s2.z_t;

      double P1_z_l = s1.z_l;
      double P1_z_t = s1.z_t;
      double P2_z_l = s2.z_l;
      double P2_z_t = s2.z_t;

      double P1_x_t = cos(phi1) * r;
      double P1_x_l = cos(phi1) * r;
      double P1_y_t = sin(phi1) * r;
      double P1_y_l = sin(phi1) * r;

      double P2_x_t = cos(phi2) * r;
      double P2_x_l = cos(phi2) * r;
      double P2_y_t = sin(phi2) * r;
      double P2_y_l = sin(phi2) * r;

      // each cutting plane is defined by P1-3. P1-2 are corners of the
      // segment, P3 is at r=0 with the "average" z to get a nice cut.
      double P3_z_l = (P1_z_l + P2_z_l) / 2;
      double P3_z_t = (P1_z_t + P2_z_t) / 2;

      // we only have one dz to position both planes. The anchor is implicitly
      // between the P3's, we have to use an offset later to make the segments
      // line up correctly.
      double dz = (P3_z_t - P3_z_l) / 2;
      double offset = (P3_z_t + P3_z_l) / 2;

      // the plane is defined by P1-P3 and P2-P3; since P3 is at r=0 we
      // only need the z.
      double D1_z_l = P1_z_l - P3_z_l;
      double D2_z_l = P2_z_l - P3_z_l;

      // the normal is then the cross product...
      double n_x_l = (P1_y_l * D2_z_l) - (D1_z_l * P2_y_l);
      double n_y_l = (D1_z_l * P2_x_l) - (P1_x_l * D2_z_l);
      double n_z_l = (P1_x_l * P2_y_l) - (P1_y_l * P2_x_l);

      // ... normalized.
      // flip the sign here (but not for t) since root wants it like that.
      double norm = -sqrt(square(n_x_l) + square(n_y_l) + square(n_z_l));
      n_x_l /= norm;
      n_y_l /= norm;
      n_z_l /= norm;

      // same game for the t side.
      double D1_z_t = P1_z_t - P3_z_t;
      double D2_z_t = P2_z_t - P3_z_t;

      double n_x_t = (P1_y_t * D2_z_t) - (D1_z_t * P2_y_t);
      double n_y_t = (D1_z_t * P2_x_t) - (P1_x_t * D2_z_t);
      double n_z_t = (P1_x_t * P2_y_t) - (P1_y_t * P2_x_t);

      norm = sqrt(square(n_x_t) + square(n_y_t) + square(n_z_t));
      n_x_t /= norm;
      n_y_t /= norm;
      n_z_t /= norm;

      // the cuttubs wants a delta phi
      double dphi = phi2 - phi1;

      DDSolid seg = DDSolidFactory::cuttubs(segname, dz, r_min, r_max, phi1, dphi,
                                            n_x_l, n_y_l, n_z_l,
                                            n_x_t, n_y_t, n_z_t); 
      segments.push_back(seg);
      offsets.push_back(offset);
    }
    s1 = s2;
  }

  assert(segments.size() >= 2); // less would be special cases

  DDSolid solid = segments[0];
  // placment happens relative to the first member of the union
  double shift = offsets[0];

  for (unsigned i = 1; i < segments.size()-1; i++) {
    // each sub-union needs a name. Well. 
    DDName unionname(solidOutput.name() + "_uni_" + std::to_string(i+1), 
                     solidOutput.ns());
    solid = DDSolidFactory::unionSolid(unionname, solid, segments[i], 
             DDTranslation(0, 0, offsets[i] - shift), 
             DDRotation());
  }

  solid = DDSolidFactory::unionSolid(solidOutput, solid, segments[segments.size()-1], 
            DDTranslation(0, 0, offsets[segments.size()-1] - shift),
            DDRotation());

  // remove the common offset from the input, to get sth. aligned at z=0.
  double offset = - shift + (min_z + (max_z-min_z)/2);

  DDLogicalPart logical(solidOutput, material, solid, DDEnums::support);

  // This is not as generic as the name promises, but it is hard to make a 
  // solid w/o placing it.
  DDRotation rot180("pixfwdCommon:Z180");
  cpv.position(logical, parent(), 1, DDTranslation(0, 0, z_pos - offset), DDRotation());
  cpv.position(logical, parent(), 2, DDTranslation(0, 0, z_pos - offset), rot180);

}