#include <DTDigitizer.h>

Inheritance diagram for DTDigitizer:

Classes
struct	hitLessT

Public Member Functions
	DTDigitizer (const edm::ParameterSet &)

virtual void	produce (edm::Event &, const edm::EventSetup &) override

Public Member Functions inherited from edm::stream::EDProducer<>
	EDProducer ()=default

Public Member Functions inherited from edm::stream::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

virtual	~EDProducerBase ()

Public Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

std::vector< edm::ProductResolverIndex > const &	indiciesForPutProducts (BranchType iBranchType) const

	ProducerBase ()

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

void	resolvePutIndicies (BranchType iBranchType, std::unordered_multimap< std::string, edm::ProductResolverIndex > const &iIndicies, std::string const &moduleLabel)

virtual	~ProducerBase () noexcept(false)

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

void	convertCurrentProcessAlias (std::string const &processName)
	Convert "@currentProcess" in InputTag process names to the actual current process name. More...

	EDConsumerBase ()

	EDConsumerBase (EDConsumerBase const &)=delete

	EDConsumerBase (EDConsumerBase &&)=default

ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const

std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

EDConsumerBase const &	operator= (EDConsumerBase const &)=delete

EDConsumerBase &	operator= (EDConsumerBase &&)=default

bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)

virtual	~EDConsumerBase () noexcept(false)

Private Types
typedef std::map< DTWireId, std::vector< const PSimHit * > >	DTWireIdMap

typedef DTWireIdMap::const_iterator	DTWireIdMapConstIter

typedef DTWireIdMap::iterator	DTWireIdMapIter

typedef std::pair< const PSimHit *, float >	hitAndT

typedef std::vector< hitAndT >	TDContainer

Private Member Functions
float	asymGausSmear (double mean, double sigmaLeft, double sigmaRight, CLHEP::HepRandomEngine *) const

std::pair< float, bool >	computeTime (const DTLayer layer, const DTWireId &wireId, const PSimHit hit, const LocalVector &BLoc, CLHEP::HepRandomEngine *)

std::pair< float, bool >	driftTimeFromParametrization (float x, float alpha, float By, float Bz, CLHEP::HepRandomEngine *) const

std::pair< float, bool >	driftTimeFromTimeMap () const

void	dumpHit (const PSimHit *hit, float xEntry, float xExit, const DTTopology &topo)

float	externalDelays (const DTLayer layer, const DTWireId &wireId, const PSimHit hit) const

void	storeDigis (DTWireId &wireId, TDContainer &hits, DTDigiCollection &output, DTDigiSimLinkCollection &outputLinks)

Private Attributes
edm::EDGetTokenT< CrossingFrame< PSimHit > >	cf_token

std::string	collection_for_XF

float	deadTime

bool	debug

std::string	geometryType

bool	IdealModel

bool	interpolate

float	LinksTimeWindow

std::string	mix_

bool	MultipleLinks

bool	onlyMuHits

float	smearing

std::string	syncName

float	theConstVDrift

std::unique_ptr< DTDigiSyncBase >	theSync

double	vPropWire

Friends
class	DTDigitizerAnalysis

Additional Inherited Members
Public Types inherited from edm::stream::EDProducer<>
typedef CacheContexts< T... >	CacheTypes

typedef CacheTypes::GlobalCache	GlobalCache

typedef AbilityChecker< T... >	HasAbility

typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache

typedef LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext

typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache

typedef CacheTypes::RunCache	RunCache

typedef RunContextT< RunCache, GlobalCache >	RunContext

typedef CacheTypes::RunSummaryCache	RunSummaryCache

Public Types inherited from edm::stream::EDProducerBase
typedef EDProducerAdaptorBase	ModuleType

Public Types inherited from edm::ProducerBase
typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from edm::stream::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

Digitize the muon drift tubes. The parametrisation function in DTDriftTimeParametrization from P.G.Abia, J.Puerta is used in all cases where it is applicable.

Authors: : G. Bevilacqua, N. Amapane, G. Cerminara, R. Bellan

Definition at line 45 of file DTDigitizer.h.

Member Typedef Documentation

typedef std::map<DTWireId, std::vector<const PSimHit*> > DTDigitizer::DTWireIdMap

private

Definition at line 57 of file DTDigitizer.h.

typedef DTWireIdMap::const_iterator DTDigitizer::DTWireIdMapConstIter

private

Definition at line 59 of file DTDigitizer.h.

typedef DTWireIdMap::iterator DTDigitizer::DTWireIdMapIter

private

Definition at line 58 of file DTDigitizer.h.

typedef std::pair<const PSimHit*,float> DTDigitizer::hitAndT

private

Definition at line 54 of file DTDigitizer.h.

typedef std::vector<hitAndT> DTDigitizer::TDContainer

private

Definition at line 55 of file DTDigitizer.h.

Constructor & Destructor Documentation

DTDigitizer::DTDigitizer ( const edm::ParameterSet & conf_ )

explicit

Definition at line 57 of file DTDigitizer.cc.

References beamerCreator::create(), muonDTDigis_cfi::deadTime, debug, Exception, reco::get(), edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), muonDTDigis_cfi::IdealModel, HiCaloJetParameters_cff::interpolate, edm::Service< T >::isAvailable(), muonDTDigis_cfi::LinksTimeWindow, muonDTDigis_cfi::MultipleLinks, muonDTDigis_cfi::onlyMuHits, AlCaHLTBitMon_QueryRunRegistry::string, and DTLinearDriftAlgo_cfi::vPropWire.

                                                   {
   
   // Set verbose output
   debug=conf_.getUntrackedParameter<bool>("debug"); 
     
   if (debug) LogPrint("DTDigitizer")<<"Creating a DTDigitizer"<<endl;
   
   //register the Producer with a label
   //produces<DTDigiCollection>("MuonDTDigis"); // FIXME: Do I pass it by ParameterSet?
   produces<DTDigiCollection>(); // FIXME: Do I pass it by ParameterSet?
   //  produces<DTDigiSimLinkCollection>("MuonDTDigiSimLinks");
   produces<DTDigiSimLinkCollection>();
   
   //Parameters:
 
   // build digis only for mu hits (for debug purposes) 
   onlyMuHits=conf_.getParameter<bool>("onlyMuHits");
   
   // interpolate parametrization function
   interpolate=conf_.getParameter<bool>("interpolate");
   
   // Velocity of signal propagation along the wire (cm/ns)
   // For the default value
   // cfr. CMS-IN 2000-021:   (2.56+-0.17)x1e8 m/s
   //      CMS NOTE 2003-17:  (0.244)  m/ns
   vPropWire=conf_.getParameter<double>("vPropWire"); //24.4
 
   // Dead time for signals on the same wire (number from M. Pegoraro)  
   deadTime=conf_.getParameter<double>("deadTime"); //150
   
   // further configurable smearing
   smearing=conf_.getParameter<double>("Smearing"); // 3.
 
   // Sync Algo
   syncName = conf_.getParameter<string>("SyncName");
   theSync.reset( DTDigiSyncFactory::get()->create(syncName,conf_.getParameter<ParameterSet>("pset")) );
 
   // Debug flag to switch to the Ideal model
   // it uses a constant drift velocity and doesn't set any external delay
   IdealModel = conf_.getParameter<bool>("IdealModel");
 
   // Constant drift velocity needed by the above flag
   if(IdealModel)
     theConstVDrift = conf_.getParameter<double>("IdealModelConstantDriftVelocity"); // 55 um/ns
   else theConstVDrift = 55.;
 
   // get random engine
   edm::Service<edm::RandomNumberGenerator> rng;
   if ( ! rng.isAvailable()) {
     throw cms::Exception("Configuration")
       << "RandomNumberGeneratorService for DTDigitizer missing in cfg file";
   }
 
   // MultipleLinks=false ==> one-to-one correspondence between digis and SimHits 
   MultipleLinks = conf_.getParameter<bool>("MultipleLinks");
   // MultipleLinks=true ==> association of SimHits within a time window LinksTimeWindow 
   // (of the order of the resolution)
   LinksTimeWindow = conf_.getParameter<double>("LinksTimeWindow"); // (10 ns)
 
   //Name of Collection used for create the XF 
   mix_ = conf_.getParameter<std::string>("mixLabel");
   collection_for_XF = conf_.getParameter<std::string>("InputCollection");
   cf_token = consumes<CrossingFrame<PSimHit> >( edm::InputTag(mix_, collection_for_XF) );
 
   //String to choice between ideal (the deafult) and (mis)aligned geometry for the digitization step 
   geometryType = conf_.getParameter<std::string>("GeometryType");
 
 }

Member Function Documentation

float DTDigitizer::asymGausSmear	(	double	mean,
		double	sigmaLeft,
		double	sigmaRight,
		CLHEP::HepRandomEngine *	engine
	)		const

private

Definition at line 442 of file DTDigitizer.cc.

References f, and lumiQTWidget::t.

                                                                      {
 
   double f = sigmaLeft/(sigmaLeft+sigmaRight);
   double t;
 
   if (CLHEP::RandFlat::shoot(engine) <= f) {
     t = CLHEP::RandGaussQ::shoot(engine, mean, sigmaLeft);
     t = mean - fabs(t - mean);
   } else {
     t = CLHEP::RandGaussQ::shoot(engine, mean, sigmaRight);
     t = mean + fabs(t - mean);
   }
   return static_cast<float>(t);
 }

pair< float, bool > DTDigitizer::computeTime	(	const DTLayer *	layer,
		const DTWireId &	wireId,
		const PSimHit *	hit,
		const LocalVector &	BLoc,
		CLHEP::HepRandomEngine *	engine
	)

private

Definition at line 229 of file DTDigitizer.cc.

References Vector3DBase< T, FrameTag >::cross(), edmIntegrityCheck::d, debug, delta, dir, Vector3DBase< T, FrameTag >::dot(), PSimHit::entryPoint(), PSimHit::exitPoint(), muonDTDigis_cfi::IdealModel, PSimHit::localDirection(), PSimHit::localPosition(), M_PI, PV3DBase< T, PVType, FrameType >::mag(), PSimHit::momentumAtEntry(), DTTopology::none, DTTopology::onWhichBorder(), PSimHit::pabs(), PSimHit::particleType(), EnergyCorrector::pt, DTLayer::specificTopology(), mathSSE::sqrt(), theta(), Vector3DBase< T, FrameTag >::unit(), DTWireId::wire(), DTTopology::wirePosition(), PV3DBase< T, PVType, FrameType >::x(), x(), DTTopology::xMax, DTTopology::xMin, PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                                                        {
 
   LocalPoint entryP = hit->entryPoint();
   LocalPoint exitP = hit->exitPoint();
   int partType = hit->particleType();
 
   const DTTopology &topo = layer->specificTopology();
 
   // Pay attention: in CMSSW the rf of the SimHit is in the layer's rf
   
   if(debug)  LogPrint("DTDigitizer")<<"Hit local entry point: "<<entryP<<endl
          <<"Hit local exit point: "<<exitP<<endl;
 
   float xwire = topo.wirePosition(wireId.wire()); 
   float xEntry = entryP.x() - xwire;
   float xExit  = exitP.x() - xwire;
 
   if(debug) LogPrint("DTDigitizer")<<"wire position: "<<xwire
         <<" x entry in cell rf: "<<xEntry
         <<" x exit in cell rf: "<<xExit<<endl;
   
   DTTopology::Side entrySide = topo.onWhichBorder(xEntry,entryP.y(),entryP.z());
   DTTopology::Side exitSide  = topo.onWhichBorder(xExit,exitP.y(),exitP.z());
 
    if (debug) dumpHit(hit, xEntry, xExit,topo);
 
   // The bolean is used to flag the drift time computation
   pair<float,bool> driftTime(0.,false);  
 
   // if delta in gas->ignore, since it is included in the parametrisation.
   // FIXME: should check that it is actually a delta ray produced by a nearby
   // muon hit. 
 
   if (partType == 11 && entrySide == DTTopology::none) {
      if (debug) LogPrint("DTDigitizer") << "    e- hit in gas; discarding " << endl;
     return driftTime;
   }
 
   float By = BLoc.y();
   float Bz = BLoc.z();
 
   // Radius and sagitta according to direction of momentum
   // (just for printing)
   // NOTE: in cmsim, d is always taken // pHat!
   LocalVector d = (exitP-entryP);
   LocalVector pHat = hit->localDirection().unit();
   LocalVector hHat = (d.cross(pHat.cross(d))).unit();
   float cosAlpha = hHat.dot(pHat);
   float sinAlpha = sqrt(1.-cosAlpha*cosAlpha);
   float radius_P = (d.mag())/(2.*cosAlpha);
   float sagitta_P = radius_P*(1.-sinAlpha);
 
   // Radius, sagitta according to field bending
   // (just for printing)
   float halfd = d.mag()/2.;
   float BMag = BLoc.mag();
   LocalVector pT = (pHat - (BLoc.unit()*pHat.dot(BLoc.unit())))*(hit->pabs());
   float radius_B = (pT.mag()/(0.3*BMag))*100.;
   float sagitta_B;
   if (radius_B > halfd) {
     sagitta_B = radius_B - sqrt(radius_B*radius_B - halfd*halfd);
   } else {
     sagitta_B = radius_B;
   }
 
   // cos(delta), delta= angle between direction at entry and hit segment
   // (just for printing)
   float delta = pHat.dot(d.unit());
   if (debug) LogPrint("DTDigitizer") << "   delta                 = " << delta  << endl
           << "   cosAlpha              = " << cosAlpha << endl
           << "   sinAlpha              = " << sinAlpha << endl
           << "   pMag                  = " << pT.mag() << endl
           << "   bMag                  = " << BMag << endl
           << "   pT                    = " << pT << endl
           << "   halfd                 = " << halfd << endl
           << "   radius_P  (cm)        = " << radius_P << endl
           << "   sagitta_P (um)        = " << sagitta_P*10000. << endl
           << "   radius_B  (cm)        = " << radius_B << endl
           << "   sagitta_B (um)        = " << sagitta_B*10000. << endl;
 
   // Select cases where parametrization can not be used.
   bool noParametrisation = 
     ( ( entrySide == DTTopology::none || exitSide == DTTopology::none ) // case # 2,3,8,9 or 11
       || (entrySide == exitSide)                   // case # 4 or 10
       || ((entrySide == DTTopology::xMin && exitSide == DTTopology::xMax) || 
       (entrySide == DTTopology::xMax && exitSide == DTTopology::xMin)) // Hit is case # 7
       );
 
   // FIXME: now, debug warning only; consider treating those 
   // with TM algo. 
   if ( delta < 0.99996 // Track is not straight. FIXME: use sagitta?
        && (noParametrisation == false)) {
     if (debug) LogPrint("DTDigitizer") << "*** WARNING: hit is not straight, type = " << partType << endl;
   }
 
   //************ 5A ***************
 
   if (!noParametrisation) {
    
     LocalVector dir = hit->momentumAtEntry(); // ex Measurement3DVector dir = hit->measurementDirection(); //FIXME?
     float theta = atan(dir.x()/-dir.z())*180/M_PI;
 
     // FIXME: use dir if M.S. is included as GARFIELD option...
     //        otherwise use hit segment dirction.
     //    LocalVector dir0 = (exitP-entryP).unit();
     //    float theta = atan(dir0.x()/-dir0.z())*180/M_PI;
     float x;
 
     Local3DPoint pt = hit->localPosition();  //ex Measurement3DPoint pt = hit->measurementPosition(); // FIXME?
      
     if(fabs(pt.z()) < 0.002) { 
       // hit center within 20 um from z=0, no need to extrapolate.
       x = pt.x() - xwire;
     } else {
       x = xEntry - (entryP.z()*(xExit-xEntry))/(exitP.z()-entryP.z());
     }
 
     if(IdealModel) return make_pair(fabs(x)/theConstVDrift,true);
     else driftTime = driftTimeFromParametrization(x, theta, By, Bz, engine);
 
   }
 
  
   if ((driftTime.second)==false) {
     // Parametrisation not applicable, or failed. Use time map.
     driftTime = driftTimeFromTimeMap();
   }
   
   //************ 5B ***************
 
   // Signal propagation, TOF etc.
   if (driftTime.second) {
     driftTime.first += externalDelays(layer,wireId,hit);
   }
   return driftTime;
 } 

pair< float, bool > DTDigitizer::driftTimeFromParametrization	(	float	x,
		float	alpha,
		float	By,
		float	Bz,
		CLHEP::HepRandomEngine *	engine
	)		const

private

Definition at line 370 of file DTDigitizer.cc.

References debug, GeomDetEnumerators::DT, f, RemoveAddSevLevel::flag, HiCaloJetParameters_cff::interpolate, edm::max(), DTDriftTimeParametrization::MB_DT_drift_time(), DTDriftTimeParametrization::drift_time::t_drift, DTDriftTimeParametrization::drift_time::t_width_m, DTDriftTimeParametrization::drift_time::t_width_p, theta(), and ntuplemaker::time.

                                                                                                {
 
   // Convert from CMSSW frame/units r.f. to parametrization ones.
   x *= 10.;  //cm -> mm 
 
   // FIXME: Current parametrisation can extrapolate above 21 mm,
   // however a detailed study is needed before using this.
    if (fabs(x) > 21.) {
      if (debug) LogPrint("DTDigitizer") << "*** WARNING: parametrisation: x out of range = "
              << x << ", skipping" << endl;
      return pair<float,bool>(0.f,false);
   }
 
   // Different r.f. of the parametrization:
   // X_par = X_ORCA; Y_par=Z_ORCA; Z_par = -Y_ORCA  
 
   float By_par = Bz;  // Bnorm
   float Bz_par = -By; // Bwire
   float theta_par = theta;
 
   // Parametrisation uses interpolation up to |theta|=45 deg,
   // |Bwire|=0.4, |Bnorm|=0.75; extrapolation above.
   if (fabs(theta_par)>45.) {
     if (debug) LogPrint("DTDigitizer") << "*** WARNING: extrapolating theta > 45: "
             << theta << endl;
     // theta_par = min(fabs(theta_par),45.f)*((theta_par<0.)?-1.:1.);
   }
   if (fabs(By_par)>0.75) {
     if (debug) LogPrint("DTDigitizer") << "*** WARNING: extrapolating Bnorm > 0.75: "
             << By_par << endl;
     // By_par = min(fabs(By_par),0.75f)*((By_par<0.)?-1.:1.);
   }
   if (fabs(Bz_par)>0.4) {
     if (debug) LogPrint("DTDigitizer") << "*** WARNING: extrapolating Bwire >0.4: "
             << Bz_par << endl;
     // Bz_par = min(fabs(Bz_par),0.4)*((Bz_par<0.)?-1.:1.);
   }
 
   DTDriftTimeParametrization::drift_time DT;
   static const DTDriftTimeParametrization par;
   unsigned short flag = par.MB_DT_drift_time (x, theta_par, By_par, Bz_par, 0, &DT, interpolate);
 
   if (debug) {
     LogPrint("DTDigitizer") << "    Parametrisation: x, theta, Bnorm, Bwire = "
      << x << " " <<  theta_par << " " << By_par << " " << Bz_par << endl
      << "  time=" << DT.t_drift
      << "  sigma_m=" <<  DT.t_width_m
      << "  sigma_p=" <<  DT.t_width_p << endl;
     if (flag!=1) {
       LogPrint("DTDigitizer") << "*** WARNING: call to parametrisation failed" << endl;
       return pair<float,bool>(0.f,false); 
     }
   }
 
   // Double half-gaussian smearing
   float time = asymGausSmear(DT.t_drift, DT.t_width_m, DT.t_width_p, engine);
 
   // Do not allow the smearing to lead to negative values
   time = max(time,0.f);
 
   // Apply a Gaussian smearing to account for electronic effects (cf. 2004 TB analysis)
   // The width of the Gaussian can be configured with the "Smearing" parameter
 
   double u = CLHEP::RandGaussQ::shoot(engine, 0., smearing);
   time += u;
 
   if (debug) LogPrint("DTDigitizer") << "  drift time = " << time << endl;
   
   return pair<float,bool>(time,true); 
 }

pair< float, bool > DTDigitizer::driftTimeFromTimeMap ( ) const

private

Definition at line 458 of file DTDigitizer.cc.

References debug.

                                                          {
   // FIXME: not yet implemented.
   if (debug) LogPrint("DTDigitizer") << "   TimeMap " << endl;
   return pair<float,bool>(0.,false);
 }

void DTDigitizer::dumpHit	(	const PSimHit *	hit,
		float	xEntry,
		float	xExit,
		const DTTopology &	topo
	)

private

Definition at line 573 of file DTDigitizer.cc.

References DTTopology::cellHeight(), DTTopology::cellLenght(), DTTopology::cellWidth(), PSimHit::energyLoss(), PSimHit::entryPoint(), PSimHit::exitPoint(), createfilelist::int, mag(), PSimHit::momentumAtEntry(), DTTopology::onWhichBorder(), PSimHit::pabs(), PSimHit::particleType(), PSimHit::processType(), PSimHit::trackId(), Vector3DBase< T, FrameTag >::unit(), x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                                   {
   
   LocalPoint entryP = hit->entryPoint();
   LocalPoint exitP = hit->exitPoint();
   
   DTTopology::Side entrySide = topo.onWhichBorder(xEntry,entryP.y(),entryP.z());
   DTTopology::Side exitSide  = topo.onWhichBorder(xExit,exitP.y(),exitP.z());
   //  ProcessTypeEnumerator pTypes;
   
   LogPrint("DTDigitizer") << endl
        << "------- SimHit: " << endl
        << "   Particle type         = " << hit->particleType() << endl
        << "   process type          = " << hit->processType() << endl
        << "   process type          = " << hit->processType() << endl
     // << "   packedTrackId         = " << hit->packedTrackId() << endl
        << "   trackId               = " << hit->trackId() << endl // new,is the same as the
                                                                   // previous?? FIXME-Check
        << "   |p|                   = " << hit->pabs() << endl
        << "   Energy loss           = " << hit->energyLoss() << endl
     // << "   timeOffset            = " << hit->timeOffset() << endl
     // << "   measurementPosition   = " << hit->measurementPosition() << endl
     // << "   measurementDirection  = " << hit->measurementDirection() << endl      //FIXME
        << "   localDirection        = " << hit->momentumAtEntry().unit() << endl    //FIXME is it a versor?
        << "   Entry point           = " << entryP << " cell x = " << xEntry << endl
        << "   Exit point            = " << exitP << " cell x = " << xExit << endl
        << "   DR =                  = " << (exitP-entryP).mag() << endl
        << "   Dx =                  = " << (exitP-entryP).x() << endl
        << "   Cell w,h,l            = (" << topo.cellWidth()
        << " , " << topo.cellHeight() 
        << " , " << topo.cellLenght() << ") cm" << endl
        << "   DY entry from edge    = " << topo.cellLenght()/2.-fabs(entryP.y())
        << "   DY exit  from edge    = " << topo.cellLenght()/2.-fabs(exitP.y())
        << "   entrySide = "  << (int)entrySide
        << " ; exitSide = " << (int)exitSide << endl;
 
 }

float DTDigitizer::externalDelays	(	const DTLayer *	layer,
		const DTWireId &	wireId,
		const PSimHit *	hit
	)		const

private

Definition at line 466 of file DTDigitizer.cc.

References DTTopology::cellLenght(), debug, PSimHit::localPosition(), DTLayer::specificTopology(), PSimHit::tof(), DTLinearDriftAlgo_cfi::vPropWire, and PV3DBase< T, PVType, FrameType >::y().

                                             {
   
   // Time of signal propagation along wire.
   
   float wireCoord = hit->localPosition().y();
   float halfL     = (layer->specificTopology().cellLenght())/2.;
   float propgL = halfL - wireCoord; // the FE is always located at the pos coord.
 
   float propDelay = propgL/vPropWire;
 
   // Real TOF.
   float tof = hit->tof();  
 
   // Delays and t0 according to theSync
 
   double sync= theSync->digitizerOffset(&wireId,layer);
 
 
   if (debug) {
     LogPrint("DTDigitizer") << "    propDelay =" << propDelay
      << "; TOF=" << tof
      << "; sync= " << sync
      << endl;
   }
   
   return propDelay + tof + sync;
 }

void DTDigitizer::produce	(	edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

overridevirtual

Definition at line 127 of file DTDigitizer.cc.

References debug, edm::EventID::event(), edm::EventSetup::get(), edm::Event::getByToken(), edm::RandomNumberGenerator::getEngine(), edm::EventBase::id(), MagneticField::inTesla(), DTGeometry::layer(), DTWireId::layerId(), eostools::move(), convertSQLitetoXML_cfg::output, edm::Handle< T >::product(), edm::Event::put(), edm::EventID::run(), rpcPointValidation_cfi::simHit, trackerHits::simHits, edm::Event::streamID(), GeomDet::surface(), ntuplemaker::time, Surface::toGlobal(), and GloballyPositioned< T >::toLocal().

                                                                 {
 
   edm::Service<edm::RandomNumberGenerator> rng;
   CLHEP::HepRandomEngine* engine = &rng->getEngine(iEvent.streamID());
 
   if(debug)
     LogPrint("DTDigitizer") << "--- Run: " << iEvent.id().run()
      << " Event: " << iEvent.id().event() << endl;
   
   //************ 1 ***************
    // create the container for the SimHits
   //  Handle<PSimHitContainer> simHits; 
   //  iEvent.getByLabel("g4SimHits","MuonDTHits",simHits);
     
   // use MixCollection instead of the previous
   Handle<CrossingFrame<PSimHit> > xFrame;
   iEvent.getByToken(cf_token, xFrame);
   
   unique_ptr<MixCollection<PSimHit> >
     simHits( new MixCollection<PSimHit>(xFrame.product()) );
 
    // create the pointer to the Digi container
   unique_ptr<DTDigiCollection> output(new DTDigiCollection());
    // pointer to the DigiSimLink container
   unique_ptr<DTDigiSimLinkCollection> outputLinks(new DTDigiSimLinkCollection());
   
   // Muon Geometry
   ESHandle<DTGeometry> muonGeom;
   iSetup.get<MuonGeometryRecord>().get(geometryType,muonGeom);
 
   // Magnetic Field  
   ESHandle<MagneticField> magnField;
   iSetup.get<IdealMagneticFieldRecord>().get(magnField);
 
   //************ 2 ***************
 
   // These are sorted by DetId, i.e. by layer and then by wire #
   //  map<DTDetId, vector<const PSimHit*> > wireMap;     
   DTWireIdMap wireMap;     
   
   for(MixCollection<PSimHit>::MixItr simHit = simHits->begin();
        simHit != simHits->end(); simHit++){
     
     // Create the id of the wire, the simHits in the DT known also the wireId
  
     DTWireId wireId( (*simHit).detUnitId() );
     // Fill the map
     wireMap[wireId].push_back(&(*simHit));
   }
   
   pair<float,bool> time(0.,false);
 
   //************ 3 ***************
   // Loop over the wires
   for(DTWireIdMapConstIter wire = wireMap.begin(); wire!=wireMap.end(); wire++){
     // SimHit Container associated to the wire
     const vector<const PSimHit*> & vhit = (*wire).second; 
     if(vhit.size()!=0) {
       TDContainer tdCont; // It is a vector<pair<const PSimHit*,float> >;
       
       //************ 4 ***************
       DTWireId wireId = (*wire).first;
 
       //const DTLayer* layer = dynamic_cast< const DTLayer* > (muonGeom->idToDet(wireId.layerId()));
       const DTLayer* layer = muonGeom->layer(wireId.layerId()); 
 
       // Loop on the hits of this wire    
       for (vector<const PSimHit*>::const_iterator hit=vhit.begin();
        hit != vhit.end(); hit++){
     //************ 5 ***************
     LocalPoint locPos = (*hit)->localPosition();
 
     const LocalVector BLoc=layer->surface().toLocal(magnField->inTesla(layer->surface().toGlobal(locPos)));
 
     time = computeTime(layer, wireId, *hit, BLoc, engine);
 
     //************ 6 ***************
     if (time.second) {
       tdCont.push_back(make_pair((*hit),time.first));
     } else {
       if (debug) LogPrint("DTDigitizer") << "hit discarded" << endl;
     }
       }
 
       //************ 7 ***************
 
       // the loading must be done by layer but
       // the digitization must be done by wire (in order to take into account the dead time)
 
       storeDigis(wireId,tdCont,*output,*outputLinks);
     }
     
   }
 
   //************ 8 ***************  
   // Load the Digi Container in the Event
   //iEvent.put(std::move(output),"MuonDTDigis");
   iEvent.put(std::move(output));
   iEvent.put(std::move(outputLinks));
 
 }

void DTDigitizer::storeDigis	(	DTWireId &	wireId,
		TDContainer &	hits,
		DTDigiCollection &	output,
		DTDigiSimLinkCollection &	outputLinks
	)

private

Definition at line 499 of file DTDigitizer.cc.

References funct::abs(), DTDigi::countsTDC(), muonDTDigis_cfi::deadTime, debug, MuonDigiCollection< IndexType, DigiType >::insertDigi(), DTWireId::layerId(), muonDTDigis_cfi::LinksTimeWindow, muonDTDigis_cfi::MultipleLinks, DTDigi::number(), muonDTDigis_cfi::onlyMuHits, funct::pow(), DTDigi::time(), ntuplemaker::time, and DTWireId::wire().

                                                                                 {
 
   //************ 7A ***************
 
   // sort signal times
   sort(hits.begin(),hits.end(),hitLessT());
 
   //************ 7B ***************
 
   float wakeTime = -999999.0;
   float resolTime = -999999.0;
   int digiN = -1; // Digi identifier within the cell (for multiple digis)
   DTDigi digi;
 
   // loop over signal times and drop signals inside dead time
   for ( TDContainer::const_iterator hit = hits.begin() ; hit != hits.end() ; 
     hit++ ) {
 
     if (onlyMuHits && abs((*hit).first->particleType())!=13) continue;
 
     //************ 7C ***************
     
     float time = (*hit).second;
     if ( time > wakeTime ) {
       // Note that digi is constructed with a float value (in ns)
       int wireN = wireId.wire();
       digiN++;
       digi = DTDigi(wireN, time, digiN);
 
       // Add association between THIS digi and the corresponding SimTrack
       unsigned int SimTrackId = (*hit).first->trackId();
       EncodedEventId evId = (*hit).first->eventId();
       DTDigiSimLink digisimLink(wireN, digiN, time, SimTrackId, evId);
 
       if(debug) {
     LogPrint("DTDigitizer")<<endl<<"---- DTDigitizer ----"<<endl;
     LogPrint("DTDigitizer")<<"wireId: "<<wireId<<endl;
     LogPrint("DTDigitizer")<<"sim. time = "<<time<<endl;
     LogPrint("DTDigitizer")<<"digi number = "<< digi.number()<<", digi time = "<<digi.time()
         <<", linked to SimTrack Id = "<<SimTrackId<<endl;
       }
 
       //************ 7D ***************
       if(digi.countsTDC() < pow(2.,16)){
     DTLayerId layerID = wireId.layerId();  //taking the layer in which reside the wire
         output.insertDigi(layerID, digi); // ordering Digis by layer
         outputLinks.insertDigi(layerID, digisimLink);
     wakeTime = time + deadTime;
     resolTime = time + LinksTimeWindow;
       } 
       else {
     digiN--;
       }
     }
     else if (MultipleLinks && time < resolTime){
       int wireN = wireId.wire();
       unsigned int SimTrackId = (*hit).first->trackId();
       EncodedEventId evId = (*hit).first->eventId();
       DTDigiSimLink digisimLink(wireN, digiN, time, SimTrackId, evId);
       DTLayerId layerID = wireId.layerId(); 
       outputLinks.insertDigi(layerID, digisimLink);
 
       if(debug) { 
     LogPrint("DTDigitizer")<<"\nAdded multiple link: \n"
         <<"digi number = "<<digi.number()<<", digi time = "<<digi.time()<<" (sim. time = "<<time<<")"
         <<", linked to SimTrack Id = "<<SimTrackId<<endl;
       }
     }
   }
   
 }

Friends And Related Function Documentation

friend class DTDigitizerAnalysis

friend

Definition at line 105 of file DTDigitizer.h.

Member Data Documentation

edm::EDGetTokenT<CrossingFrame<PSimHit> > DTDigitizer::cf_token

private

Definition at line 132 of file DTDigitizer.h.

std::string DTDigitizer::collection_for_XF

private

Definition at line 130 of file DTDigitizer.h.

float DTDigitizer::deadTime

private

Definition at line 109 of file DTDigitizer.h.

bool DTDigitizer::debug

private

Definition at line 111 of file DTDigitizer.h.

std::string DTDigitizer::geometryType

private

Definition at line 118 of file DTDigitizer.h.

bool DTDigitizer::IdealModel

private

Definition at line 121 of file DTDigitizer.h.

bool DTDigitizer::interpolate

private

Definition at line 112 of file DTDigitizer.h.

float DTDigitizer::LinksTimeWindow

private

Definition at line 126 of file DTDigitizer.h.

std::string DTDigitizer::mix_

private

Definition at line 129 of file DTDigitizer.h.

bool DTDigitizer::MultipleLinks

private

Definition at line 125 of file DTDigitizer.h.

bool DTDigitizer::onlyMuHits

private

Definition at line 113 of file DTDigitizer.h.

float DTDigitizer::smearing

private

Definition at line 110 of file DTDigitizer.h.

std::string DTDigitizer::syncName

private

Definition at line 115 of file DTDigitizer.h.

float DTDigitizer::theConstVDrift

private

Definition at line 122 of file DTDigitizer.h.

std::unique_ptr<DTDigiSyncBase> DTDigitizer::theSync

private

Definition at line 116 of file DTDigitizer.h.

double DTDigitizer::vPropWire

private

Definition at line 108 of file DTDigitizer.h.

Classes

Public Member Functions

Private Types

Private Member Functions

Private Attributes

Friends

Additional Inherited Members

Detailed Description

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation