PedeSteerer Class Reference

#include <PedeSteerer.h>

Public Member Functions
std::string	buildMasterSteer (const std::vector< std::string > &binaryFiles)
	construct (and return name of) master steering file from config, binaryFiles etc. More...
void	buildSubSteer (AlignableTracker *aliTracker, AlignableMuon *aliMuon, AlignableExtras *aliExtras)
	construct steering files about hierarchy, fixing etc. an keep track of their names More...
double	cmsToPedeFactor (unsigned int parNum) const
void	correctToReferenceSystem ()
const std::string &	directory () const
	directory from constructor input, '/' is attached if needed More...
bool	isCorrectToRefSystem (const std::vector< Alignable * > &coordDefiners) const
bool	isNoHiera (const Alignable *ali) const
	True if 'ali' was deselected from hierarchy and any ancestor (e.g. mother) has parameters. More...
int	parameterSign () const
	results from pede (and start values for pede) might need a sign flip More...
	PedeSteerer (AlignableTracker *aliTracker, AlignableMuon *aliMuon, AlignableExtras *aliExtras, AlignmentParameterStore *store, const PedeLabelerBase *labels, const edm::ParameterSet &config, const std::string &defaultDir, bool noSteerFiles)
int	runPede (const std::string &masterSteer) const
	run pede, masterSteer should be as returned from buildMasterSteer(...) More...
	~PedeSteerer ()

Private Types
typedef std::map< const Alignable *, std::vector< float > >	AlignablePresigmasMap

Private Member Functions
unsigned int	buildNoHierarchyCollection (const std::vector< Alignable * > &alis)
bool	checkParameterChoices (const std::vector< Alignable * > &alis) const
std::ofstream *	createSteerFile (const std::string &name, bool addToList)
	create and open file with name, if (addToList) append to mySteeringFiles More...
void	defineCoordinates (const std::vector< Alignable * > &alis, Alignable *aliMaster, const std::string &fileName)
std::string	fileName (const std::string &addendum) const
	full name with directory and 'idenitfier' More...
int	fixParameter (Alignable *ali, unsigned int iRunRange, unsigned int iParam, char selector, std::ofstream *&filePtr, const std::string &fileName)
std::pair< unsigned int, unsigned int >	fixParameters (const std::vector< Alignable * > &alignables, const std::string &file)
void	hierarchyConstraint (const Alignable *ali, const std::vector< Alignable * > &components, std::ofstream &file) const
unsigned int	hierarchyConstraints (const std::vector< Alignable * > &alis, const std::string &file)
unsigned int	presigmas (const std::vector< edm::ParameterSet > &cffPresi, const std::string &fileName, const std::vector< Alignable * > &alis, AlignableTracker *aliTracker, AlignableMuon *aliMuon, AlignableExtras *aliExtras)
	interprete content of presigma VPSet 'cffPresi' and call presigmasFile More...
unsigned int	presigmasFile (const std::string &fileName, const std::vector< Alignable * > &alis, const AlignablePresigmasMap &aliPresisMap)
	look for active 'alis' in map of presigma values and create steering file More...
std::vector< Alignable * >	selectCoordinateAlis (const std::vector< Alignable * > &alignables) const

Private Attributes
const AlignableObjectId	alignableObjectId_
	pointer to labeler (not the owner) More...
const edm::ParameterSet	myConfig
std::string	myDirectory
bool	myIsSteerFileDebug
	flag to write steering files to /dev/null More...
const PedeLabelerBase *	myLabels
	not the owner! More...
std::set< const Alignable * >	myNoHieraCollection
	keeps track of created 'secondary' steering files More...
bool	myNoSteerFiles
	directory of all files More...
int	myParameterSign
	whether or not to fill pede steering files with debug info More...
const AlignmentParameterStore *	myParameterStore
std::vector< std::string >	mySteeringFiles
	precision for writing constraints to text file More...
unsigned int	theConstrPrecision
	hierarchy constraints with less params are ignored More...
std::vector< Alignable * >	theCoordDefiners
	master coordinates, must (?) be global frame More...
Alignable *	theCoordMaster
	Alignables deselected for hierarchy constr. More...
double	theMinHieraConstrCoeff
	old pede versions (before May '07) need a sign flip... More...
unsigned int	theMinHieraParPerConstr
	min absolute value of coefficients in hierarchy constraints More...

Detailed Description

provides steering for pede according to configuration

Author

: Gero Flucke date : October 2006

Date

2013/06/18 13:31:29

Revision

1.29

(last update by

Author

jbehr

)

Definition at line 36 of file PedeSteerer.h.

Member Typedef Documentation

typedef std::map<const Alignable*,std::vector<float> > PedeSteerer::AlignablePresigmasMap

private

Definition at line 70 of file PedeSteerer.h.

Constructor & Destructor Documentation

PedeSteerer::PedeSteerer	(	AlignableTracker *	aliTracker,
		AlignableMuon *	aliMuon,
		AlignableExtras *	aliExtras,
		AlignmentParameterStore *	store,
		const PedeLabelerBase *	labels,
		const edm::ParameterSet &	config,
		const std::string &	defaultDir,
		bool	noSteerFiles
	)

constructor from AlignableTracker/AlignableMuon, their AlignmentParameterStore and the labeler (NOTE: The latter two must live longer than the constructed PedeSteerer!)

Definition at line 53 of file PedeSteerer.cc.

References Alignable::addComponent(), AlignmentParameterStore::alignables(), checkParameterChoices(), AlignableObjectId::commonObjectIdProvider(), correctToReferenceSystem(), Exception, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), Alignable::globalPosition(), align::invalid, isCorrectToRefSystem(), GloballyPositioned< T >::move(), myConfig, myDirectory, myIsSteerFileDebug, myNoSteerFiles, myParameterSign, myParameterStore, selectCoordinateAlis(), AlCaHLTBitMon_QueryRunRegistry::string, Alignable::surface(), theConstrPrecision, theCoordDefiners, theCoordMaster, theMinHieraConstrCoeff, theMinHieraParPerConstr, PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                :
  myParameterStore(store), myLabels(labels),
  alignableObjectId_{AlignableObjectId::commonObjectIdProvider(aliTracker, aliMuon)},
  myConfig(config),
  myDirectory(myConfig.getUntrackedParameter<std::string>("fileDir")),
  myNoSteerFiles(noSteerFiles),
  myIsSteerFileDebug(myConfig.getUntrackedParameter<bool>("steerFileDebug")),
  myParameterSign(myConfig.getUntrackedParameter<int>("parameterSign")),
  theMinHieraConstrCoeff(myConfig.getParameter<double>("minHieraConstrCoeff")),
  theMinHieraParPerConstr(myConfig.getParameter<unsigned int>("minHieraParPerConstr")),
  theConstrPrecision(myConfig.getParameter<unsigned int>("constrPrecision")),
  theCoordMaster(0)
{
  if (myParameterSign != 1 && myParameterSign != -1) {
    cms::Exception("BadConfig") << "Expect PedeSteerer.parameterSign = +/-1, "
                << "found " << myParameterSign << ".";
  }

  // Correct directory, needed before asking for fileName(..):
  if (myDirectory.empty()) myDirectory = defaultDir;
  if (!myDirectory.empty() && myDirectory.find_last_of('/') != myDirectory.size() - 1) {
    myDirectory += '/'; // directory may need '/'
  }

  const std::vector<Alignable*> &alis = myParameterStore->alignables();
  if (!this->checkParameterChoices(alis)) {} // anyway thrown exception

  // Coordinate system selection and correction before everything
  theCoordDefiners = this->selectCoordinateAlis(alis);
  if (!theCoordDefiners.empty()) { // Create steering with constraints to define coordinate system:
    // OK, some hacks:
    // - we want a composite with global coordinates where tracker and muon are components
    //   (to call RigidBodyAl.Param.->globalParameters() in correctToReferenceSystem(..))
    // - so we create a AlignableComposite and add tracker and muon
    // - but the addComponent(..) method is so cute that it calculates position from 
    //   daughters' deepComponents()
    // - so we want to move it back to (0,0,0), but ali->move(..) would move daughters as well
    //   => cheat with a const_cast and move only the surface back
    // - this hacked master object does not have a label for its parameters
    //   => some warnings if debug output selected in pedeSteer files
    // - we must not delete our new master (little mem. leak...) since that would delete
    //   the daughters as well!
    if (aliTracker) {
      theCoordMaster = new AlignableComposite(aliTracker->id(), align::invalid);
      theCoordMaster->addComponent(aliTracker);
    } else if (aliMuon) {
      theCoordMaster = new AlignableComposite(aliMuon->id(), align::invalid);
    } else {
      throw cms::Exception("BadConfig")
    << "[PedeSteerer]" << "Cannot define global coordinate system "
    << "with neither tracker nor muon!";
    }
    if (aliMuon) theCoordMaster->addComponent(aliMuon); // tracker is already added if existing
    if (aliExtras) { // tracker and/or muon are already added if existing
      align::Alignables allExtras = aliExtras->components();
      for ( std::vector<Alignable*>::iterator it = allExtras.begin(); it != allExtras.end(); ++it ) {
    theCoordMaster->addComponent(*it);
      }
    }

    const Alignable::PositionType &tmpPos = theCoordMaster->globalPosition();
    AlignableSurface & masterSurf = const_cast<AlignableSurface&>(theCoordMaster->surface());
    masterSurf.move(align::GlobalVector(-tmpPos.x(),-tmpPos.y(),-tmpPos.z()));

    if (this->isCorrectToRefSystem(theCoordDefiners)) { // defined by 's' (MC): 'correct' misalignment
      this->correctToReferenceSystem(); // really before 'defineCoordinates'?
    }
  } 

}

PedeSteerer::~PedeSteerer

(

)

non-virtual destructor: do not inherit from this class

Definition at line 128 of file PedeSteerer.cc.

{
  // delete theCoordMaster; NO, see above
}

Member Function Documentation

std::string PedeSteerer::buildMasterSteer

(

const std::vector< std::string > &

binaryFiles

)

construct (and return name of) master steering file from config, binaryFiles etc.

Definition at line 751 of file PedeSteerer.cc.

References createSteerFile(), fileName(), edm::ParameterSet::getParameter(), mps_fire::i, myConfig, mySteeringFiles, and AlCaHLTBitMon_QueryRunRegistry::string.

{
  const std::string nameMasterSteer(this->fileName("Master"));
  std::ofstream *mainSteerPtr = this->createSteerFile(nameMasterSteer, false);
  if (!mainSteerPtr) return "";

  // add external steering files, if any
  std::vector<std::string> addfiles =  myConfig.getParameter<std::vector<std::string> >("additionalSteerFiles");
  mySteeringFiles.insert(mySteeringFiles.end(),
                         addfiles.begin(),
                         addfiles.end());

  // add steering files to master steering file
  std::ofstream &mainSteerRef = *mainSteerPtr;
  for (unsigned int iFile = 0; iFile < mySteeringFiles.size(); ++iFile) {
    mainSteerRef << mySteeringFiles[iFile] << "\n";
  }

  // add binary files to master steering file
  mainSteerRef << "\nCfiles\n";
  for (unsigned int iFile = 0; iFile < binaryFiles.size(); ++iFile) {
    mainSteerRef << binaryFiles[iFile] << "\n";
  }

  // add method
  mainSteerRef << "\nmethod  " << myConfig.getParameter<std::string>("method") << "\n";

  // add further options
  const std::vector<std::string> opt(myConfig.getParameter<std::vector<std::string> >("options"));
  mainSteerRef << "\n* Outlier treatment and other options \n";
  for (unsigned int i = 0; i < opt.size(); ++i) {
    mainSteerRef << opt[i] << "\n";
  }

  delete mainSteerPtr;  // close (and flush) again

  return nameMasterSteer;
}

unsigned int PedeSteerer::buildNoHierarchyCollection ( const std::vector< Alignable * > &  alis )

private

Store Alignables that have SelectionUserVariables attached to their AlignmentParameters (these must exist) that indicate removal from hierarchy, i.e. make it 'top level'.

Definition at line 161 of file PedeSteerer.cc.

References Alignable::alignmentParameters(), Exception, SelectionUserVariables::fullSelection(), Alignable::mother(), myNoHieraCollection, AlignmentParameters::size(), and AlignmentParameters::userVariables().

Referenced by buildSubSteer().

{
  myNoHieraCollection.clear();  // just in case of re-use...

  for (std::vector<Alignable*>::const_iterator iAli = alis.begin() ; iAli != alis.end(); ++iAli) {
    AlignmentParameters *params = (*iAli)->alignmentParameters();
    SelectionUserVariables *selVar = dynamic_cast<SelectionUserVariables*>(params->userVariables());
    if (!selVar) continue;
    // Now check whether taking out of hierarchy is selected - must be consistent!
    unsigned int numNoHieraPar = 0;
    unsigned int numHieraPar = 0;
    for (unsigned int iParam = 0; static_cast<int>(iParam) < params->size(); ++iParam) {
      const char selector = selVar->fullSelection()[iParam];
      if (selector == 'C' || selector == 'F' || selector == 'H') {
    ++numNoHieraPar;
      } else if (selector == 'c' || selector == 'f' || selector == '1' || selector == 'r'
                 || selector == 's') {
    ++numHieraPar;
      } // else ... accept '0' as undetermined
    }
    if (numNoHieraPar) { // Selected to be taken out.
      if (numHieraPar) { // Inconsistent: Some parameters still in hierarchy ==> exception!
    throw cms::Exception("BadConfig") 
      << "[PedeSteerer::buildNoHierarchyCollection] All active parameters of alignables to be "
      << " taken out of the hierarchy must be marked with capital letters 'C', 'F' or 'H'!";
      }
      bool isInHiera = false; // Check whether Alignable is really part of hierarchy:
      Alignable *mother = *iAli;
      while ((mother = mother->mother())) {
    if (mother->alignmentParameters()) isInHiera = true; // could 'break;', but loop is short
      }
      // Complain, but keep collection short if not in hierarchy:
      if (isInHiera) myNoHieraCollection.insert(*iAli);
      else edm::LogWarning("Alignment") << "@SUB=PedeSteerer::buildNoHierarchyCollection"
                    << "Alignable not in hierarchy, no need to remove it!";
    }
  } // end loop on alignables

  return myNoHieraCollection.size();
}

void PedeSteerer::buildSubSteer	(	AlignableTracker *	aliTracker,
		AlignableMuon *	aliMuon,
		AlignableExtras *	aliExtras
	)

construct steering files about hierarchy, fixing etc. an keep track of their names

Definition at line 674 of file PedeSteerer.cc.

References AlignmentParameterStore::alignables(), buildNoHierarchyCollection(), PedeSteererWeakModeConstraints::constructConstraints(), defineCoordinates(), fileName(), fixParameters(), PedeSteererWeakModeConstraints::getConfigData(), edm::ParameterSet::getParameter(), hierarchyConstraints(), myConfig, myLabels, myNoHieraCollection, myParameterStore, presigmas(), AlCaHLTBitMon_QueryRunRegistry::string, theCoordDefiners, and theCoordMaster.

{
  const std::vector<Alignable*> &alis = myParameterStore->alignables();

  if (theCoordMaster && !theCoordDefiners.empty()) {
    const std::string nameCoordFile(this->fileName("Coord"));
    this->defineCoordinates(theCoordDefiners, theCoordMaster, nameCoordFile);
    edm::LogInfo("Alignment") << "@SUB=PedeSteerer::buildSubSteer" 
                              << theCoordDefiners.size() << " highest level objects define the "
                  << "coordinate system, steering file " << nameCoordFile << ".";
  }

  const std::string nameFixFile(this->fileName("FixPara"));
  const std::pair<unsigned int, unsigned int> nFixFixCor(this->fixParameters(alis, nameFixFile));
  if (nFixFixCor.first != 0 || nFixFixCor.second != 0) {
    edm::LogInfo("Alignment") << "@SUB=PedeSteerer::buildSubSteer" 
                              << nFixFixCor.first << " parameters fixed at 0. and "
                              << nFixFixCor.second << " at 'original' position, "
                              << "steering file " << nameFixFile << ".";
  } 

  if (this->buildNoHierarchyCollection(alis)) { // before hierarchyConstraints(..)
    edm::LogInfo("Alignment") << "@SUB=PedeSteerer::buildSubSteer"
                  << myNoHieraCollection.size()<<" alignables taken out of hierarchy.";
  }

  const std::string nameHierarchyFile(this->fileName("Hierarchy"));
  unsigned int nConstraint = this->hierarchyConstraints(alis, nameHierarchyFile);
  if (nConstraint) {
    edm::LogInfo("Alignment") << "@SUB=PedeSteerer::buildSubSteer" 
                              << "Hierarchy constraints for " << nConstraint << " alignables, "
                              << "steering file " << nameHierarchyFile << ".";
  }
  
  //construct the systematic geometry deformations
  if((myConfig.getParameter<std::vector<edm::ParameterSet> >("constraints")).size() > 0) {
    PedeSteererWeakModeConstraints GeometryConstraints(aliTracker,
                                                       myLabels,
                                                       myConfig.getParameter<std::vector<edm::ParameterSet> >("constraints"),
                                                       myConfig.getParameter<std::string>("steerFile"));
    
    //prepare the output files
    //Get the data structure in which the configuration data are stored.
    //The relation between the ostream* and the corresponding file name needs to be filled
    auto& ConstraintsConfigContainer = GeometryConstraints.getConfigData();
    
    //loop over all configured constraints
    for(auto& it: ConstraintsConfigContainer) {
      //each level has its own constraint which means the output is stored in a separate file
      for(const auto& ilevelsFilename: it.levelsFilenames_) {
        it.mapFileName_.insert(std::make_pair
                   (ilevelsFilename.second,this->createSteerFile(ilevelsFilename.second,true))
                   );
      }
    }
    
    unsigned int nGeometryConstraint = GeometryConstraints.constructConstraints(alis);
    if (nGeometryConstraint) {
      edm::LogInfo("Alignment") << "@SUB=PedeSteerer::buildSubSteer" 
                                << "Geometry constraints for " << nGeometryConstraint << " alignables.";
    }
  }
  
  const std::string namePresigmaFile(this->fileName("Presigma"));
  unsigned int nPresigma = 
    this->presigmas(myConfig.getParameter<std::vector<edm::ParameterSet> >("Presigmas"),
                    namePresigmaFile, alis, aliTracker, aliMuon, aliExtras);
  if (nPresigma) {
    edm::LogInfo("Alignment") << "@SUB=PedeSteerer::buildSubSteer" 
                              << "Presigma values set for " << nPresigma << " parameters, "
                              << "steering file " << namePresigmaFile << ".";
  }

  // Delete all SelectionUserVariables now? They will anyway be overwritten by MillePedeVariables...
}

bool PedeSteerer::checkParameterChoices ( const std::vector< Alignable * > &  alis ) const

private

Checks whether SelectionUserVariables that might be attached to alis' AlignmentParameters (these must exist) are all known.

Definition at line 203 of file PedeSteerer.cc.

References Exception, SelectionUserVariables::fullSelection(), AlignmentParameters::size(), and AlignmentParameters::userVariables().

Referenced by PedeSteerer().

{
  for (std::vector<Alignable*>::const_iterator iAli = alis.begin() ; iAli != alis.end(); ++iAli) {
    AlignmentParameters *paras = (*iAli)->alignmentParameters();
    SelectionUserVariables *selVar = dynamic_cast<SelectionUserVariables*>(paras->userVariables());
    if (!selVar) continue;
    for (unsigned int iParam = 0; static_cast<int>(iParam) < paras->size(); ++iParam) {
      const char sel = selVar->fullSelection()[iParam];
      if (sel != 'f' && sel != 'F' && sel != 'c' && sel != 'C' &&
      sel != '0' && sel != '1' && sel != 'H' && sel != 'r' && sel != 's') {
    throw cms::Exception("BadConfig")
      << "[PedeSteerer::unknownParameterChoices] " 
      << "Unexpected parameter selector '" << sel
      << "', use \n'f/F' (fix),\n'c/C' (fix at correct pos.),\n'1/H' (free),\n"
      << "'r/s' (free, but defining reference system, trying to correct misalignment if 's')"
          << " or \n'0' (ignore).\n"
      << "Capital letters mean that the Alignable is taken out of a possible hierarchy,\n"
      << "but must be used consistently for all its parameters.";
    return false; // unreached
      }
    }
  }

  return true;
}

double PedeSteerer::cmsToPedeFactor

(

unsigned int

parNum

)

const

Definition at line 140 of file PedeSteerer.cc.

References RigidBodyAlignmentParameters::dalpha, RigidBodyAlignmentParameters::dbeta, RigidBodyAlignmentParameters::dgamma, RigidBodyAlignmentParameters::dx, RigidBodyAlignmentParameters::dy, and RigidBodyAlignmentParameters::dz.

Referenced by fixParameter(), presigmasFile(), and PedeReader::setParameter().

{
  return 1.; // mmh, otherwise would need to FIXME hierarchyConstraint...

  switch (parNum) {
  case RigidBodyAlignmentParameters::dx:
  case RigidBodyAlignmentParameters::dy:
    return 1000.; // cm to mum *1/10 to get smaller values
  case RigidBodyAlignmentParameters::dz:
    return 2500.;   // cm to mum *1/4 
  case RigidBodyAlignmentParameters::dalpha:
  case RigidBodyAlignmentParameters::dbeta:
    return 1000.; // rad to mrad (no first guess for sensitivity yet)
  case RigidBodyAlignmentParameters::dgamma:
    return 10000.; // rad to mrad *10 to get larger values
  default:
    return 1.;
  }
}

void PedeSteerer::correctToReferenceSystem

(

)

If reference alignables have been configured, shift everything such that mean position and orientation of dets in these alignables are zero.

Definition at line 395 of file PedeSteerer.cc.

References AlCaHLTBitMon_QueryRunRegistry::comp, allConversions_cfi::dz, MillePedeFileConverter_cfg::e, Alignable::move(), Alignable::rotateInGlobalFrame(), theCoordDefiners, theCoordMaster, and align::toMatrix().

Referenced by PedeSteerer().

{
  typedef RigidBodyAlignmentParameters RbPars;
  if (!theCoordMaster || theCoordDefiners.empty()) return; // nothing was defined

  std::vector<Alignable*> definerDets; // or ...DetUnits
  for (std::vector<Alignable*>::iterator it = theCoordDefiners.begin(), iE = theCoordDefiners.end();
       it != iE; ++it) {// find lowest level objects of alignables that define the coordinate system
    const std::vector<Alignable*> &comp = (*it)->deepComponents();
    definerDets.insert(definerDets.end(), comp.begin(), comp.end());
  }

  for (unsigned int iLoop = 0; ; ++iLoop) { // iterate: shifts and rotations are not independent
    AlgebraicVector meanPars(RbPars::N_PARAM);
    for (std::vector<Alignable*>::iterator it = definerDets.begin(), iE = definerDets.end();
     it != iE; ++it) { // sum up mean displacements/misrotations:
      meanPars += RbPars(*it, true).globalParameters();// requires theCoordMaster has global frame
    }
    meanPars /= definerDets.size();
    const align::Scalar squareSum = meanPars.normsq();

    if (squareSum < 1.e-20) break; // sqrt(1.e-20)=1.e-10: close enough to stop iterating
    if (iLoop == 0) {
      edm::LogInfo("Alignment") << "@SUB=PedeSteerer::correctToReferenceSystem"
                << "Loop " << iLoop << " "
                << "Mean misalignment of dets of defined coordinate system"
                << (squareSum < 1.e-20 ? ":" :
                    " (will be iteratively corrected to < 1.e-10):") << meanPars;
    }
    if (iLoop >=5) { // 3 iterations should be safe, use 5 for 'more' safety...
      edm::LogError("Alignment") << "@SUB=PedeSteerer::correctToReferenceSystem"
                                 << "No convergence in " << iLoop << " iterations, " 
                                 << "remaining misalignment: " << meanPars;
      break;
    }

    const GlobalVector globalShift(meanPars[RbPars::dx],meanPars[RbPars::dy],meanPars[RbPars::dz]);
    theCoordMaster->move(-globalShift); // sign to revert
    align::EulerAngles globalAngles(3);
    globalAngles[0] = meanPars[RbPars::dalpha];
    globalAngles[1] = meanPars[RbPars::dbeta];
    globalAngles[2] = meanPars[RbPars::dgamma];
    theCoordMaster->rotateInGlobalFrame(align::toMatrix(-globalAngles)); // sign to revert
  }
  
}

std::ofstream * PedeSteerer::createSteerFile ( const std::string &  name, bool  addToList  )

private

create and open file with name, if (addToList) append to mySteeringFiles

Definition at line 643 of file PedeSteerer.cc.

References Exception, myNoSteerFiles, mySteeringFiles, MillePedeFileConverter_cfg::out, mps_fire::result, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by buildMasterSteer(), defineCoordinates(), fixParameter(), hierarchyConstraints(), and presigmasFile().

{
  const std::string realName(myNoSteerFiles ? "/dev/null" : name.c_str());

  std::ofstream *result = new std::ofstream(realName.c_str(), std::ios::out);
  if (!result || !result->is_open()) {
    delete result; // needed before exception in case just open failed
    throw cms::Exception("FileOpenProblem") << "[PedeSteerer::createSteerFile]" 
                        << "Could not open " << realName 
                        << " as output file.";
  } else if (addToList) {
    mySteeringFiles.push_back(realName); // keep track
  }

  return result;
}

void PedeSteerer::defineCoordinates ( const std::vector< Alignable * > &  alis, Alignable *  aliMaster, const std::string &  fileName  )

private

Create steering file with constraints defining coordinate system via hierarchy constraints between 'aliMaster' and 'alis'; 'aliMaster' must not have parameters: would not make sense!

Definition at line 347 of file PedeSteerer.cc.

References Alignable::alignmentParameters(), createSteerFile(), Exception, hierarchyConstraint(), myIsSteerFileDebug, and Alignable::setAlignmentParameters().

Referenced by buildSubSteer().

{
  std::ofstream *filePtr = this->createSteerFile(fileName, true);
  (*filePtr) << "* Constraints to define coordinate system:\n";
  if (!aliMaster || aliMaster->alignmentParameters()) {
    throw cms::Exception("BadConfig")
      << "[PedeSteerer::defineCoordinates] " << "No master alignable or it has parameters!";
  }
  if (myIsSteerFileDebug) { // See constructor comments about hack:
    edm::LogError("Alignment") << "@SUB=PedeSteerer::defineCoordinates"
                   << "Ignore following LogicErrors from PedeLabeler.";
  }
  AlignmentParameters *par = new RigidBodyAlignmentParameters(aliMaster, false);
  aliMaster->setAlignmentParameters(par); // hierarchyConstraint needs parameters
  this->hierarchyConstraint(aliMaster, alis, *filePtr);
  aliMaster->setAlignmentParameters(0); // erase dummy parameters

  delete filePtr; // automatically flushes, no problem if NULL ptr.   
}

const std::string& PedeSteerer::directory ( ) const

inline

directory from constructor input, '/' is attached if needed

Definition at line 67 of file PedeSteerer.h.

References myDirectory.

Referenced by PedeReader::PedeReader().

{ return myDirectory;}

std::string PedeSteerer::fileName ( const std::string &  addendum ) const

private

full name with directory and 'idenitfier'

Definition at line 662 of file PedeSteerer.cc.

References edm::ParameterSet::getParameter(), myConfig, myDirectory, dataset::name, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by buildMasterSteer(), buildSubSteer(), and fixParameters().

{

  std::string name(myDirectory);
  name += myConfig.getParameter<std::string>("steerFile");
  name += addendum;
  name += ".txt";

  return name;
}

int PedeSteerer::fixParameter ( Alignable *  ali, unsigned int  iRunRange, unsigned int  iParam, char  selector, std::ofstream *&  filePtr, const std::string &  fileName  )

private

If 'selector' means fixing, create corresponding steering file line in file pointed to by 'filePtr'. If 'filePtr == 0' create file with name 'fileName' (and return pointer via reference).

Definition at line 265 of file PedeSteerer.cc.

References PedeLabelerBase::alignableLabelFromParamAndInstance(), Alignable::alignmentParameters(), cmsToPedeFactor(), createSteerFile(), Exception, FrontierConditions_GlobalTag_cff::file, Alignable::globalPosition(), Alignable::id(), AlignmentParametersFactory::kRigidBody, myIsSteerFileDebug, myLabels, PedeLabelerBase::parameterLabel(), AlignmentParameters::parameters(), parameterSign(), position, mps_fire::result, and AlignmentParameters::type().

Referenced by fixParameters().

{
  int result = 0;
  float fixAt = 0.;
  if (selector == 'c' || selector == 'C') {
    if (ali->alignmentParameters()->type() != AlignmentParametersFactory::kRigidBody) {
      throw cms::Exception("BadConfig") 
    << "PedeSteerer::fixParameter: correction (c/C) possible only for RigidBodyParameters";
    }
    fixAt = -this->parameterSign() * RigidBodyAlignmentParameters(ali, true).parameters()[iParam];
    result = -1;
  } else if (selector == 'f' || selector == 'F') {
    result = 1;
  }

  if (result) {
    if (!filePtr) {
      filePtr = this->createSteerFile(fileName, true);
      (*filePtr) << "Parameter\n";
    }
    std::ofstream &file = *filePtr;

    const unsigned int aliLabel = myLabels->alignableLabelFromParamAndInstance(ali, iParam, iInstance);
    file << myLabels->parameterLabel(aliLabel, iParam) << "  " 
         << fixAt * this->cmsToPedeFactor(iParam) << " -1.0";
    if (myIsSteerFileDebug) { // debug
      const GlobalPoint position(ali->globalPosition());
      file << "  * id " << ali->id() << ", eta " << position.eta() << ", z " << position.z()
           << ", r " << position.perp() << ", phi " << position.phi();
    }
    file << "\n";
  }

  return result;
}

std::pair< unsigned int, unsigned int > PedeSteerer::fixParameters ( const std::vector< Alignable * > &  alignables, const std::string &  file  )

private

Checks whether 'alignables' have SelectionUserVariables attached to their AlignmentParameters (these must exist) that indicate fixation of a parameter, a steering 'file' is created accordingly. Returns number of parameters fixed at 0 and at 'nominal truth'.

Definition at line 231 of file PedeSteerer.cc.

References fileName(), fixParameter(), SelectionUserVariables::fullSelection(), myLabels, PedeLabelerBase::numberOfParameterInstances(), AlignmentParameters::size(), and AlignmentParameters::userVariables().

Referenced by buildSubSteer().

{
  // return number of parameters fixed at 0. and fixed at original position 
  std::pair<unsigned int, unsigned int> numFixNumFixCor(0, 0);

  std::ofstream *filePtr = 0;

  for (std::vector<Alignable*>::const_iterator iAli = alis.begin() ; iAli != alis.end(); ++iAli) {

    AlignmentParameters *params = (*iAli)->alignmentParameters();
    SelectionUserVariables *selVar = dynamic_cast<SelectionUserVariables*>(params->userVariables());
    if (!selVar) continue;
    
    for (unsigned int iParam = 0; static_cast<int>(iParam) < params->size(); ++iParam) {
      const unsigned int nInstances = myLabels->numberOfParameterInstances(*iAli, iParam);
      for (unsigned int iInstance=0;iInstance<nInstances;++iInstance) {
    int whichFix = this->fixParameter(*iAli, iInstance, iParam,
                      selVar->fullSelection()[iParam], filePtr,
                      fileName);
    if (whichFix == 1) {
      ++(numFixNumFixCor.first);
    } else if (whichFix == -1) {
      ++(numFixNumFixCor.second);
    }
      }
    }
  }

  delete filePtr; // automatically flushes, no problem if NULL ptr.   

  return numFixNumFixCor;
}

void PedeSteerer::hierarchyConstraint ( const Alignable *  ali, const std::vector< Alignable * > &  components, std::ofstream &  file  ) const

private

Definition at line 479 of file PedeSteerer.cc.

References PedeLabelerBase::alignableLabel(), Alignable::alignableObjectId(), alignableObjectId_, plotBeamSpotDB::first, Alignable::globalPosition(), AlignmentParameterStore::hierarchyConstraints(), AlignableObjectId::idToString(), isNoHiera(), myIsSteerFileDebug, myLabels, myParameterStore, PedeLabelerBase::parameterLabel(), PV3DBase< T, PVType, FrameType >::perp(), theConstrPrecision, theMinHieraConstrCoeff, and theMinHieraParPerConstr.

Referenced by defineCoordinates(), and hierarchyConstraints().

{
  typedef AlignmentParameterStore::ParameterId ParameterId;

  std::vector<std::vector<ParameterId> > paramIdsVec;
  std::vector<std::vector<double> > factorsVec;
  const bool allConstr = false; // true; // make configurable?
  static bool first = true;
  if (allConstr && first) {
    edm::LogWarning("Alignment") << "@SUB=PedeSteerer::hierarchyConstraint"
                 << "changed to use all 6 constraints";
    first = false;
  }
  if (!myParameterStore->hierarchyConstraints(ali, components, paramIdsVec, factorsVec, allConstr,
                          theMinHieraConstrCoeff)){
    edm::LogWarning("Alignment") << "@SUB=PedeSteerer::hierarchyConstraint"
                 << "Problems from store.";
  }

  for (unsigned int iConstr = 0; iConstr < paramIdsVec.size(); ++iConstr) {
    std::ostringstream aConstr;

    const std::vector<ParameterId> &parIds = paramIdsVec[iConstr];
    const std::vector<double> &factors = factorsVec[iConstr];
    unsigned int nParPerConstr = 0; // keep track of used factor/parId pair
    // parIds.size() == factors.size() granted by myParameterStore->hierarchyConstraints
    for (unsigned int iParam = 0; iParam < parIds.size(); ++iParam) {
      Alignable *aliSubComp = parIds[iParam].first;
      const unsigned int compParNum = parIds[iParam].second;
      if (this->isNoHiera(aliSubComp)) {
    if (myIsSteerFileDebug) aConstr << "* Taken out of hierarchy: ";
    continue;
      }
      const unsigned int aliLabel = myLabels->alignableLabel(aliSubComp);
      const unsigned int paramLabel = myLabels->parameterLabel(aliLabel, compParNum);
      // FIXME: multiply by cmsToPedeFactor(subcomponent)/cmsToPedeFactor(mother) (or vice a versa?)
      if (theConstrPrecision > 0)
        aConstr << paramLabel << "    " << std::setprecision(theConstrPrecision) << factors[iParam];
     else
        aConstr << paramLabel << "    " << factors[iParam];
      if (myIsSteerFileDebug) { // debug
    aConstr << "   ! for param " << compParNum << " of a " 
        << alignableObjectId_.idToString(aliSubComp->alignableObjectId()) << " at "
        << aliSubComp->globalPosition() << ", r=" << aliSubComp->globalPosition().perp();
      }
      aConstr << "\n";
      ++nParPerConstr; // OK, we used one.
    } // end loop on params

    // 
    if (nParPerConstr && nParPerConstr >= theMinHieraParPerConstr) { // Enough to make sense?
      if (myIsSteerFileDebug) { //debug
    file << "\n* Nr. " << iConstr << " of a '"
         << alignableObjectId_.idToString(ali->alignableObjectId()) << "' (label "
         << myLabels->alignableLabel(const_cast<Alignable*>(ali)) // ugly cast: FIXME!
         << "), position " << ali->globalPosition()
         << ", r = " << ali->globalPosition().perp();
      }
      file << "\nConstraint   0.\n" << aConstr.str(); // in future 'Wconstraint'?
    } else if (nParPerConstr > 0) { // no warning for trivial case...
      edm::LogWarning("Alignment") << "@SUB=PedeSteerer::hierarchyConstraint"
                   << "Skip constraint on " << nParPerConstr
                   << " parameter(s):\n" << aConstr.str();
    }
  } // end loop on constraints
}

unsigned int PedeSteerer::hierarchyConstraints ( const std::vector< Alignable * > &  alis, const std::string &  file  )

private

Definition at line 443 of file PedeSteerer.cc.

References alignableObjectId_, createSteerFile(), hierarchyConstraint(), and AlignableObjectId::idToString().

Referenced by buildSubSteer().

{
  std::ofstream *filePtr = 0;

  unsigned int nConstraints = 0;
  std::vector<Alignable*> aliDaughts;
  for (std::vector<Alignable*>::const_iterator iA = alis.begin(), iEnd = alis.end();
       iA != iEnd; ++iA) {
    aliDaughts.clear();
    if (!(*iA)->firstCompsWithParams(aliDaughts)) {
      edm::LogWarning("Alignment") << "@SUB=PedeSteerer::hierarchyConstraints"
                   << "Some but not all daughters of "
                   << alignableObjectId_.idToString((*iA)->alignableObjectId())
                   << " with params!";
    }
    //     edm::LogInfo("Alignment") << "@SUB=PedeSteerer::hierarchyConstraints"
    //                << aliDaughts.size() << " ali param components";
    if (aliDaughts.empty()) continue;
    //     edm::LogInfo("Alignment") << "@SUB=PedeSteerer::hierarchyConstraints"
    //                << aliDaughts.size() << " alignable components ("
    //                << (*iA)->size() << " in total) for " 
    //                << aliId.alignableTypeName(*iA) 
    //                << ", layer " << aliId.typeAndLayerFromAlignable(*iA).second
    //                << ", position " << (*iA)->globalPosition()
    //                << ", r = " << (*iA)->globalPosition().perp();
    if (!filePtr) filePtr = this->createSteerFile(fileName, true);
    ++nConstraints;
    this->hierarchyConstraint(*iA, aliDaughts, *filePtr);
  }

  delete filePtr; // automatically flushes, no problem if NULL ptr.   

  return nConstraints;
}

bool PedeSteerer::isCorrectToRefSystem

(

const std::vector< Alignable * > &

coordDefiners

)

const

Definition at line 369 of file PedeSteerer.cc.

References Exception, SelectionUserVariables::fullSelection(), and mps_fire::i.

Referenced by PedeSteerer().

{
  bool doCorrect = false;
  bool doNotCorrect = false;
  for (std::vector<Alignable*>::const_iterator it = coordDefiners.begin(), iE=coordDefiners.end();
       it != iE; ++it) {
    SelectionUserVariables *selVar = 
      ((*it)->alignmentParameters() ? 
       dynamic_cast<SelectionUserVariables*>((*it)->alignmentParameters()->userVariables()) : 0);
    if (!selVar) continue;  // is an error!?

    for (unsigned int i = 0; i < selVar->fullSelection().size(); ++i) {
      if (selVar->fullSelection()[i] == 'r') doNotCorrect = true;
      else if (selVar->fullSelection()[i] == 's') doCorrect = true;
    }
  }

  if (doCorrect && doNotCorrect) {
    throw cms::Exception("BadConfig")
      << "[PedeSteerer::doCorrectToRefSystem]: Parameter selection 's' and 'r' must not coexist!";
  }

  return doCorrect;
}

bool PedeSteerer::isNoHiera

(

const Alignable *

ali

)

const

True if 'ali' was deselected from hierarchy and any ancestor (e.g. mother) has parameters.

Definition at line 134 of file PedeSteerer.cc.

References myNoHieraCollection.

Referenced by hierarchyConstraint().

{
  return (myNoHieraCollection.find(ali) != myNoHieraCollection.end());
}

int PedeSteerer::parameterSign ( ) const

inline

results from pede (and start values for pede) might need a sign flip

Definition at line 65 of file PedeSteerer.h.

References myParameterSign.

Referenced by fixParameter(), PedeReader::setCalibrationParameter(), and PedeReader::setParameter().

{ return myParameterSign; }

unsigned int PedeSteerer::presigmas ( const std::vector< edm::ParameterSet > &  cffPresi, const std::string &  fileName, const std::vector< Alignable * > &  alis, AlignableTracker *  aliTracker, AlignableMuon *  aliMuon, AlignableExtras *  aliExtras  )

private

interprete content of presigma VPSet 'cffPresi' and call presigmasFile

Definition at line 549 of file PedeSteerer.cc.

References AlignmentParameterSelector::addSelections(), alignableObjectId_, AlignmentParameterSelector::clear(), Exception, AlignableObjectId::idToString(), presigmasFile(), AlignmentParameterSelector::selectedAlignables(), and AlignmentParameterSelector::selectedParameters().

Referenced by buildSubSteer(), and presigmasFile().

{
  // We loop on given PSet's, each containing a parameter selection and the presigma value
  // The resulting presigmas are stored in a map with Alignable* as key.
  // This map, 'fileName' and 'alis' are passed further to create the steering file.

  AlignmentParameterSelector selector(aliTracker, aliMuon, aliExtras);
  AlignablePresigmasMap aliPresiMap; // map to store alis with presigmas of their parameters 
  for (std::vector<edm::ParameterSet>::const_iterator iSet = cffPresi.begin(), iE = cffPresi.end();
       iSet != iE; ++iSet) { // loop on individual PSets defining ali-params with their presigma
    selector.clear();
    selector.addSelections((*iSet).getParameter<edm::ParameterSet>("Selector"));
    const std::vector<Alignable*> &alis = selector.selectedAlignables();
    const std::vector<std::vector<char> > &sels =  selector.selectedParameters();
    const float presigma = (*iSet).getParameter<double>("presigma");
    if (presigma <= 0.) { // given presigma > 0., 0. later used if not (yet) chosen for parameter
      throw cms::Exception("BadConfig")
        << "[PedeSteerer::presigmas]: Pre-sigma must be > 0., but is " << presigma << ".";
    }
    // now loop on alis of present selection
    for (unsigned int iAli = 0; iAli < alis.size(); ++iAli) {
      std::vector<float> &presigmas = aliPresiMap[alis[iAli]]; // existing or empty, so ensure length:
      if (presigmas.size() < sels[iAli].size()) presigmas.resize(sels[iAli].size(), 0.);
      for (unsigned int iParam = 0; iParam < sels[iAli].size(); ++iParam) { // loop on parameters
        if (sels[iAli][iParam] != '0') { // all but '0' means to apply the chosen presigma
          if (presigmas[iParam] != 0.) { // reset forbidden (would make it order dependent!)
            throw cms::Exception("BadConfig")
              << "[PedeSteerer::presigmas]: Try to set pre-sigma " << presigma << ", but already "
              << "set " << presigmas[iParam] << " (for a " 
              << alignableObjectId_.idToString(alis[iAli]->alignableObjectId()) << ").";
          }
          presigmas[iParam] = presigma;
        } // end if selected for presigma
      } // end loop on params
    } // end loop on alignables for given selection and presigma
  } // end loop on PSets 

  if (aliPresiMap.empty()) return 0;
  else return this->presigmasFile(fileName, alis, aliPresiMap);
}

unsigned int PedeSteerer::presigmasFile ( const std::string &  fileName, const std::vector< Alignable * > &  alis, const AlignablePresigmasMap &  aliPresisMap  )

private

look for active 'alis' in map of presigma values and create steering file

Definition at line 594 of file PedeSteerer.cc.

References PedeLabelerBase::alignableLabel(), alignableObjectId_, cmsToPedeFactor(), createSteerFile(), SelectionUserVariables::fullSelection(), AlignableObjectId::idToString(), myIsSteerFileDebug, myLabels, PedeLabelerBase::parameterLabel(), and presigmas().

Referenced by presigmas().

{
  // Check if 'alis' are in aliPresiMap, 
  // if yes apply presigma - but NOT if parameter is fixed!
  std::ofstream *filePtr = 0;

  unsigned int nPresiParam = 0;
  for (std::vector<Alignable*>::const_iterator iAli = alis.begin(), iAliE = alis.end();
       iAli != iAliE; ++iAli) {
    // Any presigma chosen for alignable?
    AlignablePresigmasMap::const_iterator presigmasIt = aliPresiMap.find(*iAli);
    if (presigmasIt == aliPresiMap.end()) continue; // no presigma chosen for alignable

    // Why does the following not work? It does with CMSSW_1_3_X on SLC3...
    // const AlignablePresigmasMap::data_type &presigmas = presigmasIt->second;
    const std::vector<float> &presigmas = presigmasIt->second; // I want to hide float or double...
    for (unsigned int iParam = 0; iParam < presigmas.size(); ++iParam) {
      // Now check whether a presigma value > 0. chosen: 
      if (presigmas[iParam] <= 0.) continue; // must be positive, '<' checked above
      // Do not apply presigma to inactive or fixed values.
      if (!(*iAli)->alignmentParameters()->selector()[iParam]) continue;
      SelectionUserVariables *selVar 
        = dynamic_cast<SelectionUserVariables*>((*iAli)->alignmentParameters()->userVariables());
      const char selChar = (selVar ? selVar->fullSelection()[iParam] : '1');
      if (selChar == 'f' || selChar == 'F' || selChar == 'c' || selChar == 'C') continue;
      // Finally create and write steering file:
      if (!filePtr) {
        filePtr = this->createSteerFile(fileName, true);
        (*filePtr) << "* Presigma values for active parameters: \nParameter\n";
      }
      const unsigned int aliLabel = myLabels->alignableLabel(*iAli);
      (*filePtr) << myLabels->parameterLabel(aliLabel, iParam) << "   0.   " 
                 << presigmas[iParam] * fabs(this->cmsToPedeFactor(iParam));
      if (myIsSteerFileDebug) {
    (*filePtr) << "  ! for a " << alignableObjectId_.idToString((*iAli)->alignableObjectId());
      }
      (*filePtr) << '\n';

      ++nPresiParam;
    } // end loop on parameters for alignables with chosen presigmas
  } // end loop on alignables

  delete filePtr; // close properly file
  return nPresiParam;
}

int PedeSteerer::runPede

(

const std::string &

masterSteer

)

const

run pede, masterSteer should be as returned from buildMasterSteer(...)

Definition at line 791 of file PedeSteerer.cc.

References mps_alisetup::command, FrontierConditions_GlobalTag_cff::dump, edm::ParameterSet::getUntrackedParameter(), myConfig, myDirectory, and AlCaHLTBitMon_QueryRunRegistry::string.

{
  if (masterSteer.empty()) {
    edm::LogError("Alignment") << "@SUB=PedeSteerer::runPede" << "Empty master steer file, stop";
    return 0; //false;
  }

  std::string command(myConfig.getUntrackedParameter<std::string>("pedeCommand"));
  (command += " ") += masterSteer;
  const std::string dump(myConfig.getUntrackedParameter<std::string>("pedeDump"));
  if (!dump.empty()) {
    command += " > ";
    (command += myDirectory) += dump;
  }

  edm::LogInfo("Alignment") << "@SUB=PedeSteerer::runPede" << "Start running " << command;
  // FIXME: Recommended interface to system commands?
  int shellReturn = gSystem->Exec(command.c_str());
  edm::LogInfo("Alignment") << "@SUB=PedeSteerer::runPede" << "Command returns " << shellReturn;

  return shellReturn;
}

std::vector< Alignable * > PedeSteerer::selectCoordinateAlis ( const std::vector< Alignable * > &  alignables ) const

private

Return 'alignables' that have SelectionUserVariables attached to their AlignmentParameters (these must exist) that indicate a definition of a coordinate system. Throws if ill defined reference objects.

Definition at line 304 of file PedeSteerer.cc.

References Alignable::alignmentParameters(), Exception, SelectionUserVariables::fullSelection(), Alignable::mother(), AlignmentParameters::size(), and AlignmentParameters::userVariables().

Referenced by PedeSteerer().

{
  std::vector<Alignable*> coordAlis;

  for (std::vector<Alignable*>::const_iterator iAli = alis.begin() ; iAli != alis.end(); ++iAli) {
    AlignmentParameters *params = (*iAli)->alignmentParameters();
    SelectionUserVariables *selVar = dynamic_cast<SelectionUserVariables*>(params->userVariables());
    if (!selVar) continue;
    unsigned int refParam = 0;
    unsigned int nonRefParam = 0;
    for (unsigned int iParam = 0; static_cast<int>(iParam) < params->size(); ++iParam) {
      const char selector = selVar->fullSelection()[iParam];
      if (selector == 'r' || selector == 's') {
    ++refParam;
      } else if (selector != '0' && selector != 'f') { // allow also 'c'?
    ++nonRefParam;
      }
    }
    // Check whether some 'r/s' selection string. If yes and selection makes sense, add to result:
    if (refParam) {
      if (nonRefParam) {
    throw cms::Exception("BadConfig") 
      << "[PedeSteerer::selectCoordinateAlis] All active parameters of alignables defining "
      << "the coordinate system must be marked with 'r/s' (or fixed, 'f')!";
      } else {
    Alignable *mother = *iAli;
    while ((mother = mother->mother())) {
      if (mother->alignmentParameters()) {
        throw cms::Exception("BadConfig") << "[PedeSteerer::selectCoordinateAlis] "
                          << "Alignables defining the coordinate system must "
                          << "be highest level!";
      }
    }
    coordAlis.push_back(*iAli);
      }
    }
  } // end loop on alignables

  return coordAlis;
}

Member Data Documentation

const AlignableObjectId PedeSteerer::alignableObjectId_

private

pointer to labeler (not the owner)

Definition at line 118 of file PedeSteerer.h.

Referenced by hierarchyConstraint(), hierarchyConstraints(), presigmas(), and presigmasFile().

const edm::ParameterSet PedeSteerer::myConfig

private

Definition at line 120 of file PedeSteerer.h.

Referenced by buildMasterSteer(), buildSubSteer(), fileName(), PedeSteerer(), and runPede().

std::string PedeSteerer::myDirectory

private

Definition at line 121 of file PedeSteerer.h.

Referenced by directory(), fileName(), PedeSteerer(), and runPede().

bool PedeSteerer::myIsSteerFileDebug

private

flag to write steering files to /dev/null

Definition at line 123 of file PedeSteerer.h.

Referenced by defineCoordinates(), fixParameter(), hierarchyConstraint(), PedeSteerer(), and presigmasFile().

const PedeLabelerBase* PedeSteerer::myLabels

private

not the owner!

Definition at line 117 of file PedeSteerer.h.

Referenced by buildSubSteer(), fixParameter(), fixParameters(), hierarchyConstraint(), and presigmasFile().

std::set<const Alignable*> PedeSteerer::myNoHieraCollection

private

keeps track of created 'secondary' steering files

Definition at line 131 of file PedeSteerer.h.

Referenced by buildNoHierarchyCollection(), buildSubSteer(), and isNoHiera().

bool PedeSteerer::myNoSteerFiles

private

directory of all files

Definition at line 122 of file PedeSteerer.h.

Referenced by createSteerFile(), and PedeSteerer().

int PedeSteerer::myParameterSign

private

whether or not to fill pede steering files with debug info

Definition at line 124 of file PedeSteerer.h.

Referenced by parameterSign(), and PedeSteerer().

const AlignmentParameterStore* PedeSteerer::myParameterStore

private

Definition at line 116 of file PedeSteerer.h.

Referenced by buildSubSteer(), hierarchyConstraint(), and PedeSteerer().

std::vector<std::string> PedeSteerer::mySteeringFiles

private

precision for writing constraints to text file

Definition at line 129 of file PedeSteerer.h.

Referenced by buildMasterSteer(), and createSteerFile().

unsigned int PedeSteerer::theConstrPrecision

private

hierarchy constraints with less params are ignored

Definition at line 127 of file PedeSteerer.h.

Referenced by hierarchyConstraint(), and PedeSteerer().

std::vector<Alignable*> PedeSteerer::theCoordDefiners

private

master coordinates, must (?) be global frame

Definition at line 133 of file PedeSteerer.h.

Referenced by buildSubSteer(), correctToReferenceSystem(), and PedeSteerer().

Alignable* PedeSteerer::theCoordMaster

private

Alignables deselected for hierarchy constr.

Definition at line 132 of file PedeSteerer.h.

Referenced by buildSubSteer(), correctToReferenceSystem(), and PedeSteerer().

double PedeSteerer::theMinHieraConstrCoeff

private

old pede versions (before May '07) need a sign flip...

Definition at line 125 of file PedeSteerer.h.

Referenced by hierarchyConstraint(), and PedeSteerer().

unsigned int PedeSteerer::theMinHieraParPerConstr

private

min absolute value of coefficients in hierarchy constraints

Definition at line 126 of file PedeSteerer.h.

Referenced by hierarchyConstraint(), and PedeSteerer().