#include <CSCGeometry.h>

Inheritance diagram for CSCGeometry:

Public Types
typedef std::vector< const CSCChamber * >	ChamberContainer

typedef std::vector< const CSCLayer * >	LayerContainer

Public Types inherited from TrackingGeometry
typedef std::vector< GeomDet const * >	DetContainer

typedef std::vector< DetId >	DetIdContainer

typedef std::vector< GeomDetType const * >	DetTypeContainer

typedef std::vector< GeomDetUnit const * >	DetUnitContainer

typedef std::unordered_map< unsigned int, GeomDet const * >	mapIdToDet

typedef std::unordered_map< unsigned int, GeomDetUnit const * >	mapIdToDetUnit

Public Member Functions
const CSCChamberSpecs *	buildSpecs (int iChamberType, const std::vector< float > &fpar, const std::vector< float > &fupar, const CSCWireGroupPackage &wg)

bool	centreTIOffsets () const

const CSCChamber *	chamber (CSCDetId id) const
	Return the chamber corresponding to given DetId. More...

const ChamberContainer &	chambers () const
	Return a vector of all chambers. More...

	CSCGeometry ()
	Default constructor. More...

	CSCGeometry (bool debugV, bool gangedstripsME1a_, bool onlywiresME1a_, bool realWireGeometry_, bool useCentreTIOffsets_)
	Real constructor. More...

virtual const DetIdContainer &	detIds () const override
	Returm a vector of all GeomDet DetIds (including those of GeomDetUnits) More...

virtual const DetContainer &	dets () const override
	Returm a vector of all GeomDet (including all GeomDetUnits) More...

virtual const DetTypeContainer &	detTypes () const override
	Return a vector of all det types. More...

virtual const DetIdContainer &	detUnitIds () const override
	Returm a vector of all GeomDetUnit DetIds. More...

virtual const DetUnitContainer &	detUnits () const override
	Returm a vector of all GeomDetUnit. More...

const CSCChamberSpecs *	findSpecs (int iChamberType)

bool	gangedStrips () const

virtual const GeomDet *	idToDet (DetId) const override

virtual const GeomDetUnit *	idToDetUnit (DetId) const override
	Return the pointer to the GeomDetUnit corresponding to a given DetId. More...

const CSCLayer *	layer (CSCDetId id) const
	Return the layer corresponding to given DetId. More...

const LayerContainer &	layers () const
	Return a vector of all layers. More...

void	queryModelling () const
	Dump parameters for overall strip and wire modelling. More...

bool	realWireGeometry () const

void	setDebugV (bool dbgv)

void	setGangedStripsInME1a (bool gs)

void	setOnlyWiresInME1a (bool ow)

void	setUseCentreTIOffsets (bool cti)

void	setUseRealWireGeometry (bool rwg)

bool	wiresOnly () const

virtual	~CSCGeometry ()
	Destructor. More...

Public Member Functions inherited from TrackingGeometry
virtual	~TrackingGeometry ()
	Destructor. More...

Private Types
typedef std::map< DetId, GeomDet * >	CSCDetMap

typedef std::map< int, const CSCChamberSpecs *, std::less< int > >	CSCSpecsContainer

Private Member Functions
void	addChamber (CSCChamber *ch)
	Add a chamber with given DetId. More...

void	addDet (GeomDet *det)
	Add a GeomDet; not to be called by the builder. More...

void	addDetId (DetId id)
	Add a DetId. More...

void	addDetType (GeomDetType *type)
	Add a DetType. More...

void	addLayer (CSCLayer *l)
	Add a DetUnit. More...

Private Attributes
bool	debugV_

bool	gangedstripsME1a_

bool	onlywiresME1a_

bool	realWireGeometry_

CSCSpecsContainer	specsContainer

ChamberContainer	theChambers

DetIdContainer	theDetIds

DetContainer	theDets

DetTypeContainer	theDetTypes

DetIdContainer	theDetUnitIds

DetUnitContainer	theDetUnits

LayerContainer	theLayers

CSCDetMap	theMap

bool	useCentreTIOffsets_

Friends
class	CSCGeometryBuilder

class	GeometryAligner

Detailed Description

The model of the geometry of the endcap muon CSC detectors.

Author: Tim Cox

Definition at line 24 of file CSCGeometry.h.

Member Typedef Documentation

typedef std::vector<const CSCChamber*> CSCGeometry::ChamberContainer

Definition at line 32 of file CSCGeometry.h.

typedef std::map<DetId, GeomDet*> CSCGeometry::CSCDetMap

private

Definition at line 26 of file CSCGeometry.h.

typedef std::map<int, const CSCChamberSpecs*, std::less<int> > CSCGeometry::CSCSpecsContainer

private

Definition at line 28 of file CSCGeometry.h.

typedef std::vector<const CSCLayer*> CSCGeometry::LayerContainer

Definition at line 33 of file CSCGeometry.h.

Constructor & Destructor Documentation

CSCGeometry::CSCGeometry ( )

Default constructor.

Definition at line 10 of file CSCGeometry.cc.

References debugV_, and queryModelling().

                         :  debugV_(false), gangedstripsME1a_(true), 
    onlywiresME1a_(false), realWireGeometry_(true), useCentreTIOffsets_(false) {
    if ( debugV_ ) queryModelling();
 }

CSCGeometry::CSCGeometry	(	bool	debugV,
		bool	gangedstripsME1a_,
		bool	onlywiresME1a_,
		bool	realWireGeometry_,
		bool	useCentreTIOffsets_
	)

Real constructor.

Definition at line 15 of file CSCGeometry.cc.

References debugV_, and queryModelling().

                                                                                                                                :  
    debugV_(dbgv), gangedstripsME1a_( gangedstripsME1a ), onlywiresME1a_( onlywiresME1a ), 
    realWireGeometry_( realWireGeometry ), useCentreTIOffsets_( useCentreTIOffsets ) {
    if ( debugV_ ) queryModelling();
 }

CSCGeometry::~CSCGeometry ( )

virtual

Destructor.

Definition at line 21 of file CSCGeometry.cc.

References specsContainer, and theChambers.

                          {
 
   // delete all the chambers (which will delete the layers)
   for (ChamberContainer::const_iterator ich=theChambers.begin();
        ich!=theChambers.end(); ++ich) delete (*ich);
 
   // delete specs
   for ( CSCSpecsContainer::const_iterator it =
        specsContainer.begin(); it!=specsContainer.end(); ++it) {
     delete (*it).second; // they are never shared per chamber type so should be no possible double deletion.
   }
 
 }  

Member Function Documentation

void CSCGeometry::addChamber ( CSCChamber * ch )

private

Add a chamber with given DetId.

Definition at line 36 of file CSCGeometry.cc.

References addDet(), and theChambers.

Referenced by centreTIOffsets().

                                           {
   theChambers.push_back(ch);
   addDet(ch);
 }

void CSCGeometry::addDet ( GeomDet * det )

private

Add a GeomDet; not to be called by the builder.

Definition at line 56 of file CSCGeometry.cc.

References GeomDet::geographicalId(), theDetIds, theDets, and theMap.

Referenced by addChamber(), addLayer(), and centreTIOffsets().

                                     {
   theDets.push_back(det);  
   theDetIds.push_back(det->geographicalId());
   theMap.insert(CSCDetMap::value_type(det->geographicalId(),det));
 }

void CSCGeometry::addDetId ( DetId id )

private

Add a DetId.

Referenced by centreTIOffsets().

void CSCGeometry::addDetType ( GeomDetType * type )

private

Add a DetType.

Definition at line 51 of file CSCGeometry.cc.

References theDetTypes.

Referenced by centreTIOffsets().

                                               {
   theDetTypes.push_back(type);
 }

void CSCGeometry::addLayer ( CSCLayer * l )

private

Add a DetUnit.

Definition at line 42 of file CSCGeometry.cc.

References addDet(), CSCLayer::chamber(), GeomDet::geographicalId(), CSCChamber::specs(), theDetTypes, theDetUnitIds, theDetUnits, and theLayers.

Referenced by centreTIOffsets().

                                       {
   theDetUnits.push_back(l);
   theLayers.push_back(l);
   theDetTypes.push_back(l->chamber()->specs());
   theDetUnitIds.push_back(l->geographicalId());
   addDet(l);
 }

const CSCChamberSpecs * CSCGeometry::buildSpecs	(	int	iChamberType,
		const std::vector< float > &	fpar,
		const std::vector< float > &	fupar,
		const CSCWireGroupPackage &	wg
	)

Build CSCChamberSpecs for given chamber type.

@ a good candidate to be replaced by a factory?

Definition at line 176 of file CSCGeometry.cc.

References specsContainer.

                                                      {
 
   // Note arg list order is hbot, htop, apothem, hthickness
   TrapezoidalPlaneBounds bounds( fpar[0], fpar[1], fpar[3], fpar[2] );
   const CSCChamberSpecs* aSpecs = new CSCChamberSpecs( this, iChamberType, bounds, fupar, wg );
   specsContainer[ iChamberType ] = aSpecs;
   return aSpecs;
 }

bool CSCGeometry::centreTIOffsets ( ) const

inline

Use the backed-out offsets for theCentreToIntersection in CSCLayerGeometry

Definition at line 131 of file CSCGeometry.h.

References addChamber(), addDet(), addDetId(), addDetType(), addLayer(), checklumidiff::l, queryModelling(), and useCentreTIOffsets_.

131 { return useCentreTIOffsets_; }

CSCGeometry::useCentreTIOffsets_

bool useCentreTIOffsets_

Definition: CSCGeometry.h:177

const CSCChamber * CSCGeometry::chamber ( CSCDetId id ) const

Return the chamber corresponding to given DetId.

Definition at line 118 of file CSCGeometry.cc.

References makeMuonMisalignmentScenario::endcap, idToDet(), relativeConstraints::ring, and relativeConstraints::station.

Referenced by RPCEfficiency::analyze(), L1MuonRecoTreeProducer::analyze(), BeamHaloAnalyzer::analyze(), CSCSegmentBuilder::build(), GEMCSCSegmentBuilder::build(), GlobalHaloAlgo::Calculate(), CSCHaloAlgo::Calculate(), l1t::EmtfPtAssignment::calculateAddress(), CSCTriggerGeomManager::chamber(), CSCSegtoRPC::CSCSegtoRPC(), CSCOfflineMonitor::doEfficiencies(), CSCValidation::doEfficiencies(), CSCOfflineMonitor::doSegments(), CSCValidation::doSegments(), CSCValidation::doTimeMonitoring(), CSCEfficiency::filter(), CSCUpgradeMotherboardLUTGenerator::generateLUTsME11(), CSCUpgradeMotherboardLUTGenerator::generateLUTsME21(), CSCUpgradeMotherboardLUTGenerator::generateLUTsME3141(), L1TMuon::GeometryTranslator::getCSCSpecificPoint(), AngleConverter::getGlobalEta(), AngleConverter::getProcessorPhi(), geometryXMLparser.CSCAlignable::index(), MuonMesh::isClusteredWith(), MuonMesh::isDuplicateOf(), MuonSimHitProducer::produce(), CSCMotherboardME11GEM::run(), CSCTriggerGeomManager::sectorOfChambersInStation(), and CSCUpgradeMotherboard::setupGeometry().

                                                         {
   CSCDetId id1(id.endcap(), id.station(), id.ring(), id.chamber(), 0);
   return dynamic_cast<const CSCChamber*>(idToDet(id1));
 }

const CSCGeometry::ChamberContainer & CSCGeometry::chambers ( ) const

Return a vector of all chambers.

Definition at line 106 of file CSCGeometry.cc.

References theChambers.

Referenced by FWRecoGeometryESProducer::addCSCGeometry(), CSCChamberMasker::beginRun(), AlignableMuon::buildCSCEndcap(), CSCOfflineMonitor::doEfficiencies(), CSCValidation::doEfficiencies(), and ValidateGeometry::validateCSChamberGeometry().

 {
   return theChambers;
 }

const CSCGeometry::DetIdContainer & CSCGeometry::detIds ( ) const

overridevirtual

Returm a vector of all GeomDet DetIds (including those of GeomDetUnits)

Implements TrackingGeometry.

Definition at line 87 of file CSCGeometry.cc.

References theDetIds.

 {
   return theDetIds;
 }

const CSCGeometry::DetContainer & CSCGeometry::dets ( ) const

overridevirtual

Returm a vector of all GeomDet (including all GeomDetUnits)

Implements TrackingGeometry.

Definition at line 75 of file CSCGeometry.cc.

References theDets.

Referenced by CSCRecoBadChannelsAnalyzer::analyze().

 {
   return theDets;
 }

const CSCGeometry::DetTypeContainer & CSCGeometry::detTypes ( ) const

overridevirtual

Return a vector of all det types.

Implements TrackingGeometry.

Definition at line 63 of file CSCGeometry.cc.

References theDetTypes.

Referenced by CSCRecoBadChannelsAnalyzer::analyze().

 {
   return theDetTypes;
 }

const CSCGeometry::DetIdContainer & CSCGeometry::detUnitIds ( ) const

overridevirtual

Returm a vector of all GeomDetUnit DetIds.

Implements TrackingGeometry.

Definition at line 81 of file CSCGeometry.cc.

References theDetUnitIds.

 {
   return theDetUnitIds;
 }

const CSCGeometry::DetUnitContainer & CSCGeometry::detUnits ( ) const

overridevirtual

Returm a vector of all GeomDetUnit.

Implements TrackingGeometry.

Definition at line 69 of file CSCGeometry.cc.

References theDetUnits.

 {
   return theDetUnits;
 }

const CSCChamberSpecs * CSCGeometry::findSpecs ( int iChamberType )

Return the CSCChamberSpecs* for given chamber type if it exists, or 0 if it has not been created.

Definition at line 169 of file CSCGeometry.cc.

References specsContainer.

                                                                 {
   const CSCChamberSpecs* aSpecs = 0;
   CSCSpecsContainer::const_iterator it = specsContainer.find( iChamberType );
   if (  it != specsContainer.end() )  aSpecs = (*it).second;
   return aSpecs;
 } 

bool CSCGeometry::gangedStrips ( ) const

inline

Ganged strips in ME1a

Definition at line 111 of file CSCGeometry.h.

References gangedstripsME1a_.

Referenced by CSCChamberSpecs::CSCChamberSpecs(), CSCLayerGeometry::CSCLayerGeometry(), and CSCOfflineMonitor::doPedestalNoise().

111 { return gangedstripsME1a_; }

CSCGeometry::gangedstripsME1a_

bool gangedstripsME1a_

Definition: CSCGeometry.h:174

const GeomDet * CSCGeometry::idToDet ( DetId ) const

overridevirtual

Return the pointer to the GeomDet corresponding to a given DetId (valid also for GeomDetUnits)

Implements TrackingGeometry.

Definition at line 99 of file CSCGeometry.cc.

References mps_fire::i, and theMap.

Referenced by MuonGeometrySanityCheck::analyze(), MuonCSCDetLayerGeometryBuilder::buildLayer(), chamber(), CSCEfficiency::filter(), HLTCSCOverlapFilter::hltFilter(), HLTCSCRing2or3Filter::hltFilter(), idToDetUnit(), CSCPairResidualsConstraint::isFiducial(), MuonSegmentProducer::produce(), TrackerToMuonPropagator::produce(), CSCOverlapsTrackPreparation::produce(), CSCPairResidualsConstraint::radius(), CSCPairResidualsConstraint::setZplane(), and TracktoRPC::TracktoRPC().

                                                  {
   CSCDetMap::const_iterator i = theMap.find(id);
   return (i != theMap.end()) ?
     i->second : 0 ;
 }

const GeomDetUnit * CSCGeometry::idToDetUnit ( DetId ) const

overridevirtual

Return the pointer to the GeomDetUnit corresponding to a given DetId.

Implements TrackingGeometry.

Definition at line 93 of file CSCGeometry.cc.

References idToDet().

Referenced by BeamHaloAnalyzer::analyze(), GlobalHaloAlgo::Calculate(), CSCHaloAlgo::Calculate(), GlobalHitsProdHist::fillMuon(), GlobalHitsAnalyzer::fillMuon(), GlobalHitsProducer::fillMuon(), GlobalRecHitsAnalyzer::fillMuon(), GlobalRecHitsProducer::fillMuon(), CSCBaseValidation::findLayer(), CSCDigitizer::findLayer(), layer(), and MuonSimHitProducer::produce().

 {
   return dynamic_cast<const GeomDetUnit*>(idToDet(id));
 }

const CSCLayer * CSCGeometry::layer ( CSCDetId id ) const

Return the layer corresponding to given DetId.

Definition at line 124 of file CSCGeometry.cc.

References idToDetUnit().

Referenced by MuonCSCChamberResidual::addResidual(), MuonTruth::analyze(), CSCHitAssociator::associateCSCHitId(), CSCHitAssociator::associateHitId(), GEMCSCSegmentBuilder::build(), CSCPairResidualsConstraint::calculatePhi(), CSCOfflineMonitor::doRecHits(), CSCValidation::doRecHits(), CSCEfficiency::fillRechitsSegments_info(), CSCEfficiency::fillWG_info(), CSCValidation::findNonAssociatedRecHits(), CSCRecHitDBuilder::getLayer(), geometryXMLparser.DTAlignable::index(), and geometryXMLparser.CSCAlignable::index().

                                                     {
   return dynamic_cast<const CSCLayer*>(idToDetUnit(id));
 }

const CSCGeometry::LayerContainer & CSCGeometry::layers ( ) const

Return a vector of all layers.

Definition at line 112 of file CSCGeometry.cc.

References theLayers.

Referenced by CSCRecoBadChannelsAnalyzer::analyze(), and ValidateGeometry::validateCSCLayerGeometry().

 {
   return theLayers;
 }

void CSCGeometry::queryModelling ( ) const

Dump parameters for overall strip and wire modelling.

Definition at line 128 of file CSCGeometry.cc.

References gangedstripsME1a_, LogTrace, onlywiresME1a_, realWireGeometry_, AlCaHLTBitMon_QueryRunRegistry::string, and useCentreTIOffsets_.

Referenced by centreTIOffsets(), and CSCGeometry().

                                        {
   // Dump user-selected overall modelling parameters.
   // Only requires calling once per job.
 
   LogTrace("CSCGeometry|CSC")  << "CSCGeometry::queryModelling entered...";
 
   edm::LogInfo("CSC") << "CSCGeometry version 18-Oct-2012 queryModelling...\n";
 
   std::string gs = " ";
   if ( gangedstripsME1a_ )
     gs = "GANGED";
   else
     gs = "UNGANGED";
 
   edm::LogInfo("CSC") << "CSCGeometry: in ME1a use " << gs << " strips" << "\n";
 
   std::string wo = " ";
   if ( onlywiresME1a_ )
     wo = "WIRES ONLY";
   else
     wo = "WIRES & STRIPS";
 
   edm::LogInfo("CSC") << "CSCGeometry: in ME1a use  " << wo << "\n";
 
   std::string wg = " ";
   if ( realWireGeometry_ )
     wg = "REAL";
   else
     wg = "PSEUDO";
 
   edm::LogInfo("CSC") << "CSCGeometry: wires are modelled using " << wg << " wire geometry " << "\n";
 
   std::string cti = " ";
   if ( useCentreTIOffsets_ )
     cti = "WITH";
   else
     cti = "WITHOUT";
 
   edm::LogInfo("CSC") << "CSCGeometry: strip plane centre-to-intersection ideal " << cti << " corrections " << "\n";
 }

bool CSCGeometry::realWireGeometry ( ) const

inline

Wire geometry modelled as real hardware (complex groupings of wires and dead regions) or as a pseudo geometry with just one wire grouping per chamber type (as was done in ORCA versions up to and including ORCA_8_8_1).

Definition at line 125 of file CSCGeometry.h.

References realWireGeometry_.

Referenced by CSCLayerGeometry::CSCLayerGeometry().

125 { return realWireGeometry_; }

CSCGeometry::realWireGeometry_

bool realWireGeometry_

Definition: CSCGeometry.h:176

void CSCGeometry::setDebugV ( bool dbgv )

inline

Definition at line 106 of file CSCGeometry.h.

References debugV_.

106 { debugV_ = dbgv; }