#include <SimG4HcalValidation.h>

Inheritance diagram for SimG4HcalValidation:

Public Member Functions
void	produce (edm::Event &, const edm::EventSetup &)

	SimG4HcalValidation (const edm::ParameterSet &p)

virtual	~SimG4HcalValidation ()

Public Member Functions inherited from SimProducer
void	registerProducts (edm::ProducerBase &iProd)

	SimProducer ()

Public Member Functions inherited from SimWatcher
	SimWatcher ()

virtual	~SimWatcher ()

Public Member Functions inherited from Observer< const BeginOfJob * >
	Observer ()

void	slotForUpdate (const BeginOfJob * iT)

virtual	~Observer ()

Public Member Functions inherited from Observer< const BeginOfRun * >
	Observer ()

void	slotForUpdate (const BeginOfRun * iT)

virtual	~Observer ()

Public Member Functions inherited from Observer< const BeginOfEvent * >
	Observer ()

void	slotForUpdate (const BeginOfEvent * iT)

virtual	~Observer ()

Public Member Functions inherited from Observer< const EndOfEvent * >
	Observer ()

void	slotForUpdate (const EndOfEvent * iT)

virtual	~Observer ()

Public Member Functions inherited from Observer< const G4Step * >
	Observer ()

void	slotForUpdate (const G4Step * iT)

virtual	~Observer ()

Private Member Functions
void	clear ()

void	collectEnergyRdir (const double, const double)

void	fetchHits (PHcalValidInfoLayer &)

void	fill (const EndOfEvent *ev)

double	getHcalScale (std::string, int) const

void	init ()

void	jetAnalysis (PHcalValidInfoJets &)

void	layerAnalysis (PHcalValidInfoLayer &)

void	nxNAnalysis (PHcalValidInfoNxN &)

const SimG4HcalValidation &	operator= (const SimG4HcalValidation &)

	SimG4HcalValidation (const SimG4HcalValidation &)

void	update (const BeginOfJob *job)
	This routine will be called when the appropriate signal arrives. More...

void	update (const BeginOfRun *run)
	This routine will be called when the appropriate signal arrives. More...

void	update (const BeginOfEvent *evt)
	This routine will be called when the appropriate signal arrives. More...

void	update (const G4Step *step)
	This routine will be called when the appropriate signal arrives. More...

void	update (const EndOfEvent *evt)
	This routine will be called when the appropriate signal arrives. More...

Private Attributes
bool	applySampling

double	coneSize

unsigned int	count

std::vector< double >	dEta

std::vector< double >	dPhi

double	edepd [5]

double	edepEB

double	edepEE

double	edepHB

double	edepHE

double	edepHO

double	edepl [20]

double	een

double	ehitThreshold

double	enEcal

double	enHcal

float	eta0

bool	hcalOnly

double	hen

double	hhitThreshold

std::vector< CaloHit >	hitcache

double	hoen

int	infolevel

SimG4HcalHitJetFinder *	jetf

float	jetThreshold

std::string	labelJets

std::string	labelLayer

std::string	labelNxN

std::vector< std::string >	names

HcalNumberingFromDDD *	numberingFromDDD

HcalTestNumberingScheme *	org

float	phi0

std::vector< float >	scaleHB

std::vector< float >	scaleHE

std::vector< float >	scaleHF

float	timeLowlim

float	timeUplim

double	vhitec

double	vhithc

Additional Inherited Members
Protected Member Functions inherited from SimProducer
template<class T >
void	produces ()

template<class T >
void	produces (const std::string &instanceName)

Detailed Description

Definition at line 34 of file SimG4HcalValidation.h.

Constructor & Destructor Documentation

SimG4HcalValidation::SimG4HcalValidation ( const edm::ParameterSet & p )

Definition at line 38 of file SimG4HcalValidation.cc.

References applySampling, coneSize, ehitThreshold, eta0, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), hcalOnly, hhitThreshold, infolevel, init(), jetThreshold, labelJets, labelLayer, labelNxN, names, phi0, AlCaHLTBitMon_QueryRunRegistry::string, timeLowlim, and timeUplim.

                                                                 : 
   jetf(0), numberingFromDDD(0), org(0) {
 
   edm::ParameterSet m_Anal = p.getParameter<edm::ParameterSet>("SimG4HcalValidation");
   infolevel     = m_Anal.getParameter<int>("InfoLevel");
   hcalOnly      = m_Anal.getParameter<bool>("HcalClusterOnly");
   applySampling = m_Anal.getParameter<bool>("HcalSampling");
   coneSize      = m_Anal.getParameter<double>("ConeSize");
   ehitThreshold = m_Anal.getParameter<double>("EcalHitThreshold");
   hhitThreshold = m_Anal.getParameter<double>("HcalHitThreshold");
   timeLowlim    = m_Anal.getParameter<double>("TimeLowLimit");
   timeUplim     = m_Anal.getParameter<double>("TimeUpLimit");
   jetThreshold  = m_Anal.getParameter<double>("JetThreshold");
   eta0          = m_Anal.getParameter<double>("Eta0");
   phi0          = m_Anal.getParameter<double>("Phi0");
   names         = m_Anal.getParameter<std::vector<std::string> >("Names");
   labelLayer    = m_Anal.getUntrackedParameter<std::string>("LabelLayerInfo","HcalInfoLayer");
   labelNxN      = m_Anal.getUntrackedParameter<std::string>("LabelNxNInfo","HcalInfoNxN");
   labelJets     = m_Anal.getUntrackedParameter<std::string>("LabelJetsInfo","HcalInfoJets");
 
   produces<PHcalValidInfoLayer>(labelLayer);
   if (infolevel > 0) produces<PHcalValidInfoNxN>(labelNxN);
   if (infolevel > 1) produces<PHcalValidInfoJets>(labelJets);
 
   edm::LogInfo("ValidHcal") << "HcalTestAnalysis:: Initialised as observer of "
                 << "begin/end events and of G4step with Parameter "
                 << "values: \n\tInfoLevel     = " << infolevel
                 << "\n\thcalOnly      = " << hcalOnly 
                 << "\n\tapplySampling = " << applySampling 
                 << "\n\tconeSize      = " << coneSize
                 << "\n\tehitThreshold = " << ehitThreshold 
                 << "\n\thhitThreshold = " << hhitThreshold
                 << "\n\tttimeLowlim   = " << timeLowlim
                 << "\n\tttimeUplim    = " << timeUplim
                 << "\n\teta0          = " << eta0
                 << "\n\tphi0          = " << phi0
                 << "\nLabels (Layer): " << labelLayer
                 << " (NxN): " << labelNxN << " (Jets): "
                 << labelJets;
 
   init();
 } 

SimG4HcalValidation::~SimG4HcalValidation ( )

virtual

Definition at line 81 of file SimG4HcalValidation.cc.

References count, jetf, numberingFromDDD, and org.

                                           {
 
   edm::LogInfo("ValidHcal") << "\n -------->  Total number of selected entries"
                 << " : " << count << "\nPointers:: JettFinder " 
                 << jetf << ", Numbering Scheme " << org 
                 << " and FromDDD " << numberingFromDDD;
   if (jetf)   {
     edm::LogInfo("ValidHcal") << "Delete Jetfinder";
     delete jetf;
     jetf  = 0;
   }
   if (numberingFromDDD) {
     edm::LogInfo("ValidHcal") << "Delete HcalNumberingFromDDD";
     delete numberingFromDDD;
     numberingFromDDD = 0;
   }
 }

SimG4HcalValidation::SimG4HcalValidation ( const SimG4HcalValidation & )

private

Member Function Documentation

void SimG4HcalValidation::clear ( void )

private

Definition at line 742 of file SimG4HcalValidation.cc.

References hitcache.

Referenced by update().

                                {
    hitcache.erase( hitcache.begin(), hitcache.end()); 
 }

void SimG4HcalValidation::collectEnergyRdir	(	const double	eta0,
		const double	phi0
	)

private

Definition at line 747 of file SimG4HcalValidation.cc.

References coneSize, MillePedeFileConverter_cfg::e, een, stringResolutionProvider_cfi::eta, HcalBarrel, hen, hitcache, hfClusterShapes_cfi::hits, hoen, jetf, phi, alignCSCRings::r, and SimG4HcalHitJetFinder::rDist().

Referenced by jetAnalysis(), and nxNAnalysis().

                                             {
 
   std::vector<CaloHit> * hits = &hitcache;
   std::vector<CaloHit>::iterator hit_itr;
 
   double sume = 0., sumh = 0., sumho = 0.;  
 
   for (hit_itr = hits->begin(); hit_itr < hits->end(); hit_itr++) {
 
     double e   = hit_itr->e();
     double eta = hit_itr->eta();
     double phi = hit_itr->phi();
     
     int type  = hit_itr->det();
 
     double r =  jetf->rDist(eta0, phi0, eta, phi);
     if (r < coneSize) {
       if (type == 10 || type == 11 || type == 12) {
     sume += e;
       } else           {
     sumh += e;
     if (type  == static_cast<int>(HcalBarrel) &&
         hit_itr->layer() > 17) sumho += e;
       }
     }
   }
   
   een  = sume;
   hen  = sumh;
   hoen = sumho;
 }

void SimG4HcalValidation::fetchHits ( PHcalValidInfoLayer & product )

private

Definition at line 664 of file SimG4HcalValidation.cc.

References TauDecayModes::dec, stringResolutionProvider_cfi::eta, PHcalValidInfoLayer::fillHits(), edmIntegrityCheck::group, hitcache, mps_fire::i, LogDebug, phi, lumiQTWidget::t, HcalTestNumbering::unpackHcalIndex(), and HcalDigiParam_cfi::zside.

Referenced by layerAnalysis().

                                                                 {
 
   LogDebug("ValidHcal") << "Enter SimG4HcalValidation::fetchHits with "
             << hitcache.size() << " hits";
   int nHit = hitcache.size();
   int hit  = 0;
   int i;
   std::vector<CaloHit>::iterator itr;
   std::vector<CaloHit*> lhits(nHit);
   for (i = 0, itr = hitcache.begin(); itr != hitcache.end(); i++, itr++) {
     uint32_t unitID=itr->id();
     int   subdet, zside, group, ieta, iphi, lay;
     HcalTestNumbering::unpackHcalIndex(unitID,subdet,zside,group,
                        ieta,iphi,lay);
     subdet = itr->det();
     lay    = itr->layer();
     group  = (subdet&15)<<20;
     group += ((lay-1)&31)<<15;
     group += (zside&1)<<14;
     group += (ieta&127)<<7;
     group += (iphi&127);
     itr->setId(group);
     lhits[i] = &hitcache[i];
     LogDebug("ValidHcal") << "SimG4HcalValidation::fetchHits:Original " << i 
               << " "  << hitcache[i] << "\n"
               << "SimG4HcalValidation::fetchHits:Copied   " << i 
               << " " << *lhits[i];
   }
   sort(lhits.begin(),lhits.end(),CaloHitIdMore());
   std::vector<CaloHit*>::iterator k1, k2;
   for (i = 0, k1 = lhits.begin(); k1 != lhits.end(); i++, k1++)
     LogDebug("ValidHcal") << "SimG4HcalValidation::fetchHits:Sorted " << i 
               << " " << **k1;
   int nHits = 0;
   for (i = 0, k1 = lhits.begin(); k1 != lhits.end(); i++, k1++) {
     double       ehit  = (**k1).e();
     double       t     = (**k1).t();
     uint32_t     unitID= (**k1).id();
     int          jump  = 0;
     LogDebug("ValidHcal") << "SimG4HcalValidation::fetchHits:Start " << i 
               << " U/T/E" << " 0x" << std::hex << unitID 
               << std::dec << " "  << t << " " << ehit;
     for (k2 = k1+1; k2 != lhits.end() && (t-(**k2).t()) < 1 &&
        (t-(**k2).t()) > -1 && unitID == (**k2).id(); k2++) {
       ehit += (**k2).e();
       LogDebug("ValidHcal") << "\t + " << (**k2).e();
       jump++;
     }
     LogDebug("ValidHcal") << "\t = " << ehit << " in " << jump;
 
     double eta  = (*k1)->eta();
     double phi  = (*k1)->phi();
     int lay     = ((unitID>>15)&31) + 1;
     int subdet  = (unitID>>20)&15;
     int zside   = (unitID>>14)&1;
     int ieta    = (unitID>>7)&127;
     int iphi    = (unitID)&127;
  
     // All hits in cache
     product.fillHits(nHits, lay, subdet, eta, phi, ehit, t);
     nHits++;
 
     LogDebug("ValidHcal") << "SimG4HcalValidation::fetchHits:Hit " << nHits 
               << " " << i << " ID 0x" << std::hex << unitID 
               << "   det " <<  std::dec  << subdet << " " << lay 
               << " " << zside << " " << ieta << " " << iphi 
               << " Time " << t << " E " << ehit;
 
     i  += jump;
     k1 += jump;
   }
 
   LogDebug("ValidHcal") << "SimG4HcalValidation::fetchHits called with "
             << nHit << " hits" << " and writes out " << nHits
             << '(' << hit << ") hits";
 
 }

void SimG4HcalValidation::fill ( const EndOfEvent * ev )

private

Definition at line 285 of file SimG4HcalValidation.cc.

References applySampling, TauDecayModes::dec, particleFlowClusterECALTimeSelected_cfi::depth, MillePedeFileConverter_cfg::e, ehitThreshold, enEcal, enHcal, stringResolutionProvider_cfi::eta, CaloG4Hit::getDepth(), CaloG4Hit::getEnergyDeposit(), getHcalScale(), CaloG4Hit::getPosition(), CaloG4Hit::getTimeSlice(), HcalTestNumberingScheme::getUnitID(), CaloG4Hit::getUnitID(), GeV, HcalEndcap, HcalForward, hcalOnly, hhitThreshold, hitcache, createfilelist::int, cmsBatch::log, LogDebug, names, numberingFromDDD, org, HcalTestNumberingScheme::packHcalIndex(), phi, AlCaHLTBitMon_QueryRunRegistry::string, funct::tan(), theta(), ntuplemaker::time, timeLowlim, HcalNumberingFromDDD::unitID(), HcalTestNumberingScheme::unpackHcalIndex(), vhitec, vhithc, and HcalDigiParam_cfi::zside.

Referenced by update().

                                                      {
 
   LogDebug("ValidHcal") << "SimG4HcalValidation:Fill event " 
             << (*evt)()->GetEventID();
   
   // access to the G4 hit collections 
   G4HCofThisEvent* allHC = (*evt)()->GetHCofThisEvent();
   
   int nhc = 0, j = 0;    
  
   // Hcal
   int HCHCid = G4SDManager::GetSDMpointer()->GetCollectionID(names[0]);
   CaloG4HitCollection* theHCHC = (CaloG4HitCollection*) allHC->GetHC(HCHCid);
   LogDebug("ValidHcal") << "SimG4HcalValidation :: Hit Collection for " 
             << names[0] << " of ID " << HCHCid <<" is obtained at "
             << theHCHC;
   if (HCHCid >= 0 && theHCHC != nullptr) {
     for (j = 0; j < theHCHC->entries(); j++) {
 
       CaloG4Hit* aHit = (*theHCHC)[j]; 
     
       double e        = aHit->getEnergyDeposit()/GeV;
       double time     = aHit->getTimeSlice();
       
       math::XYZPoint pos  = aHit->getPosition();
       double theta    = pos.theta();
       double   eta    = -log(tan(theta * 0.5));
       double   phi    = pos.phi();
     
       uint32_t unitID = aHit->getUnitID();
       int subdet, zside, layer, etaIndex, phiIndex, lay;
       org->unpackHcalIndex(unitID,subdet,zside,layer,etaIndex,phiIndex,lay);
 
       // some logic to separate HO ...
       layer--;
       std::string det =  "HB";
       if (subdet == static_cast<int>(HcalForward)) {
     det = "HF";
     uint16_t depth = aHit->getDepth();
     if (depth != 0) { layer += 2; lay += 2; }
     if      (layer == 1) vhithc += e;
     else if (layer == 0) vhitec += e;
     else
       edm::LogInfo("ValidHcal") << "SimG4HcalValidation::HitPMT " 
                     << subdet << " " << (2*zside-1)*etaIndex 
                     << " " << phiIndex << " " << layer+1 
                     << " R " << pos.rho() << " Phi " << phi/deg
                     << " Edep " << e << " Time " << time;
       } else if (subdet == static_cast<int>(HcalEndcap)) {
     if (etaIndex <= 20) {
       det  = "HES";
     } else {
       det = "HED";
     }
       }
       LogDebug("ValidHcal") << "SimG4HcalValidation::debugFill Hcal " 
                 << det << " layer " << std::setw(2) << layer 
                 << " lay " << std::setw(2) << lay << " time " 
                 << std::setw(6) << time << " theta " 
                 << std::setw(8) << theta << " eta " << std::setw(8)
                 << eta << " phi " << std::setw(8) << phi << " e " 
                 << std::setw(8) << e << " ID 0x" << std::hex
                 << unitID << " ID dec " << std::dec << (int)unitID;
 
       // if desired, apply sampling factors in HCAL !!!
       if (applySampling) e *= getHcalScale(det,layer);    
 
       //    filter on time & energy 
       if (time >= timeLowlim && time <= timeUplim && e > hhitThreshold ) {
     enHcal += e;
     CaloHit ahit(subdet,lay,e,eta,phi,time,unitID);
     hitcache.push_back(ahit);    // fill cache
     ++nhc;
       }    
     }
   }
   LogDebug("ValidHcal") << "SimG4HcalValidation:: HCAL hits : " << nhc;
 
   if (!hcalOnly) { //--------------------------  ECAL hits --------------------
     int ndets = names.size();
     if (ndets > 3) ndets = 3;
     for (int idty = 1; idty < ndets; idty++) {
       std::string          det = "EB";
       if      (idty ==  2) det = "EE";
       else if (idty > 2)   det = "ES";
 
       int nec    = 0;
       int ECHCid = G4SDManager::GetSDMpointer()->GetCollectionID(names[idty]);
       CaloG4HitCollection* theECHC =(CaloG4HitCollection*)allHC->GetHC(ECHCid);
       LogDebug("ValidHcal") << "SimG4HcalValidation:: Hit Collection for "
                 << names[idty] << " of ID " << ECHCid 
                 << " is obtained at " << theECHC;
       if (ECHCid >= 0 && theECHC != nullptr) {
     for (j = 0; j < theECHC->entries(); j++) {
 
       CaloG4Hit* aHit = (*theECHC)[j]; 
     
       double e        = aHit->getEnergyDeposit()/GeV;
       double time     = aHit->getTimeSlice();
       
       math::XYZPoint pos  = aHit->getPosition();
       double theta    = pos.theta();
       double   eta    = -log(tan(theta/2.));
       double   phi    = pos.phi();
       HcalNumberingFromDDD::HcalID id = numberingFromDDD->unitID(eta,phi,1,1);
       uint32_t unitID = org->getUnitID(id);
       int subdet, zside, layer, ieta, iphi, lay;
       org->unpackHcalIndex(unitID,subdet,zside,layer,ieta,iphi,lay);
       subdet = idty+9;
       layer  = 0;
       unitID = org->packHcalIndex(subdet,zside,layer,ieta,iphi,lay);
       
       //    filter on time & energy 
       if (time >= timeLowlim && time <= timeUplim && e > ehitThreshold ) {
         enEcal += e;
         CaloHit ahit(subdet,lay,e,eta,phi,time,unitID);
         hitcache.push_back(ahit);    // fill cache
         ++nec;
       }
 
       LogDebug("ValidHcal") << "SimG4HcalValidation::debugFill Ecal " 
                 << det << " layer " << std::setw(2) << layer 
                 << " lay " << std::setw(2) << lay << " time " 
                 << std::setw(6) << time << " theta " 
                 << std::setw(8) << theta << " eta " 
                 << std::setw(8) << eta  << " phi " 
                 << std::setw(8) << phi << " e " << std::setw(8)
                 << e << " ID 0x" << std::hex << unitID 
                 << " ID dec " << std::dec << (int)unitID;
 
     }
       }
 
       LogDebug("ValidHcal") << "SimG4HcalValidation:: " << det << " hits : "
                 << nec;
     }
   } // end of if(!hcalOnly)
 
 }

double SimG4HcalValidation::getHcalScale	(	std::string	det,
		int	layer
	)		const

private

Definition at line 781 of file SimG4HcalValidation.cc.

References scaleHB, scaleHE, scaleHF, and tmp.

Referenced by fill().

                                                                        {
 
   double tmp = 0.;
     
   if (det == "HB")                         {
     tmp = scaleHB[layer];
   } else if (det == "HES" || det == "HED") {
     tmp = scaleHE[layer];
   } else if (det == "HF")                  {
     tmp = scaleHF[layer];
   }    
   
   return tmp;
 }

void SimG4HcalValidation::init ( void )

private

Definition at line 119 of file SimG4HcalValidation.cc.

References coneSize, count, dEta, dPhi, mps_fire::i, jetf, scaleHB, scaleHE, and scaleHF.

Referenced by SimG4HcalValidation().

                                {
 
   float sHB[4] = { 117., 117., 178., 217.};
   float sHE[3] = { 178., 178., 178.};
   float sHF[3] = { 2.84, 2.09, 0.};     //
 
   float deta[4] = { 0.0435, 0.1305, 0.2175, 0.3045 };
   float dphi[4] = { 0.0436, 0.1309, 0.2182, 0.3054 };
 
   int i=0;
   for (i = 0; i < 4; i++) { 
     scaleHB.push_back(sHB[i]);
   }
   for (i = 0; i < 3; i++) { 
     scaleHE.push_back(sHE[i]);
   }
   for (i = 0; i < 3; i++) { 
     scaleHF.push_back(sHF[i]);
   }
 
   // window steps;
   for(i = 0; i < 4; i++) { 
     dEta.push_back(deta[i]);
     dPhi.push_back(dphi[i]);
   }
 
   // jetfinder conse size setting
   jetf   = new SimG4HcalHitJetFinder(coneSize);
 
   // counter 
   count = 0;
   
 }

void SimG4HcalValidation::jetAnalysis ( PHcalValidInfoJets & product )

private

Definition at line 531 of file SimG4HcalValidation.cc.

References collectEnergyRdir(), funct::cos(), MillePedeFileConverter_cfg::e, een, eta0, PHcalValidInfoJets::fillDiJets(), PHcalValidInfoJets::fillEcollectJet(), PHcalValidInfoJets::fillEtaPhiProfileJet(), PHcalValidInfoJets::fillJets(), PHcalValidInfoJets::fillTProfileJet(), SimG4HcalHitJetFinder::getClusters(), HcalBarrel, HcalEndcap, HcalForward, hcalOnly, hcalSimParameters_cfi::he, hitcache, hfClusterShapes_cfi::hits, mps_fire::i, jetf, jetThreshold, LogDebug, phi0, alignCSCRings::r, SimG4HcalHitJetFinder::rDist(), mps_fire::result, SimG4HcalHitJetFinder::setInput(), funct::sin(), mathSSE::sqrt(), and lumiQTWidget::t.

Referenced by produce().

                                                                  {
 
   std::vector<CaloHit> * hhit = &hitcache;
 
   jetf->setInput(hhit);
 
   // zeroing cluster list, perfom clustering, fill cluster list & return pntr
   std::vector<SimG4HcalHitCluster> * result = jetf->getClusters(hcalOnly);  
 
   std::vector<SimG4HcalHitCluster>::iterator clus_itr;
 
   LogDebug("ValidHcal") << "\n ---------- Final list of " << (*result).size()
             << " clusters ---------------";
   for (clus_itr = result->begin(); clus_itr < result->end(); clus_itr++) 
     LogDebug("ValidHcal") << (*clus_itr);
 
   std::vector<double> enevec, etavec, phivec; 
 
   if ((*result).size() > 0) {
 
     sort((*result).begin(),(*result).end()); 
 
     clus_itr = result->begin(); // first cluster only 
     double etac = clus_itr->eta();
     double phic = clus_itr->phi();
 
     double ecal_collect = 0.;    // collect Ecal energy in the cone
     if (!hcalOnly) {
       ecal_collect = clus_itr->collectEcalEnergyR();}
     else {
       collectEnergyRdir(etac, phic);
       ecal_collect = een;
     }
     LogDebug("ValidHcal") << " JetAnalysis ===> ecal_collect  = " 
               << ecal_collect;
 
     // eta-phi deviation of the cluster from nominal (eta0, phi0) values
     double dist = jetf->rDist(eta0, phi0, etac, phic);
     LogDebug("ValidHcal") << " JetAnalysis ===> eta phi deviation  = " << dist;
     product.fillEtaPhiProfileJet(eta0, phi0, etac, phic, dist);
    
     LogDebug("ValidHcal") << " JetAnalysis ===> after fillEtaPhiProfileJet";
     
     std::vector<CaloHit> * hits = clus_itr->getHits() ;
     std::vector<CaloHit>::iterator hit_itr;
 
     double ee = 0., he = 0., hoe = 0., etot = 0.;
     
     // cycle over all hits in the FIRST cluster
     for (hit_itr = hits->begin(); hit_itr < hits->end(); hit_itr++) {
       double e   = hit_itr->e();
       double t   = hit_itr->t();
       double r   = jetf->rDist(&(*clus_itr), &(*hit_itr));
 
       // energy collection
       etot += e;
       if (hit_itr->det()  == 10 || hit_itr->det()  == 11 ||
       hit_itr->det()  == 12) ee  += e;
       if (hit_itr->det()  == static_cast<int>(HcalBarrel) ||
       hit_itr->det()  == static_cast<int>(HcalEndcap) ||
       hit_itr->det()  == static_cast<int>(HcalForward)) { 
     he  += e; 
     if (hit_itr->det()  == static_cast<int>(HcalBarrel) &&
         hit_itr->layer() > 17) 
       hoe += e; 
       }
 
       if (hit_itr->det()  == static_cast<int>(HcalBarrel) ||
       hit_itr->det()  == static_cast<int>(HcalEndcap) ||
       hit_itr->det()  == static_cast<int>(HcalForward)) { 
     product.fillTProfileJet(he, r, t);
       }
     }
     
     product.fillEcollectJet(ee, he, hoe, etot);       
 
     LogDebug("ValidHcal") << " JetAnalysis ===> after fillEcollectJet: "
               << "ee/he/hoe/etot " << ee << "/" << he << "/" 
               << hoe << "/" << etot;
 
     // Loop over clusters
     for (clus_itr = result->begin(); clus_itr < result->end(); clus_itr++) {
       if (clus_itr->e() > jetThreshold) {
     enevec.push_back(clus_itr->e());
     etavec.push_back(clus_itr->eta());
     phivec.push_back(clus_itr->phi());
       }
     }
     product.fillJets(enevec, etavec, phivec);
 
     LogDebug("ValidHcal") << " JetAnalysis ===> after fillJets\n"
               << " JetAnalysis ===> (*result).size() "
               << (*result).size();
  
     // Di-jet mass
     if (etavec.size() > 1) {
       if (etavec[0] > -2.5 && etavec[0] < 2.5 && 
       etavec[1] > -2.5 && etavec[1] < 2.5) {
  
     LogDebug("ValidHcal") << " JetAnalysis ===> Di-jet mass enter\n"
                   << " JetAnalysis ===> Di-jet vectors ";
     for (unsigned int i = 0; i < enevec.size(); i++)
       LogDebug("ValidHcal") << "   e, eta, phi = " << enevec[i] << " "
                 <<  etavec[i] << " " << phivec[i];
 
         double et0 = enevec[0] / cosh(etavec[0]);
         double px0 = et0  * cos(phivec[0]);
         double py0 = et0  * sin(phivec[0]);
         double pz0 = et0  * sinh(etavec[0]);
         double et1 = enevec[1] / cosh(etavec[1]);
         double px1 = et1  * cos(phivec[1]);
         double py1 = et1  * sin(phivec[1]);
         double pz1 = et1  * sinh(etavec[1]);
          
         double dijetmass2 = (enevec[0]+enevec[1])*(enevec[0]+enevec[1])
           - (px1+px0)*(px1+px0) - (py1+py0)*(py1+py0) - (pz1+pz0)*(pz1+pz0);
  
     LogDebug("ValidHcal") << " JetAnalysis ===> Di-jet massSQ "
                   << dijetmass2;
 
         double dijetmass;
         if(dijetmass2 >= 0.) dijetmass = sqrt(dijetmass2);
         else                 dijetmass = -sqrt(-1. * dijetmass2);
 
         product.fillDiJets(dijetmass);
  
     LogDebug("ValidHcal") << " JetAnalysis ===> after fillDiJets";
       }
     }
   }
 }

void SimG4HcalValidation::layerAnalysis ( PHcalValidInfoLayer & product )

private

Definition at line 425 of file SimG4HcalValidation.cc.

References edepd, edepEB, edepEE, edepHB, edepHE, edepHO, edepl, enEcal, enHcal, fetchHits(), PHcalValidInfoLayer::fillHF(), PHcalValidInfoLayer::fillLayers(), mps_fire::i, LogDebug, MeV, vhitec, and vhithc.

Referenced by produce().

                                                                     {
 
   int i = 0;
   LogDebug("ValidHcal") << "\n ===>>> SimG4HcalValidation: Energy deposit "
             << "in MeV\n at EB : " << std::setw(6) << edepEB/MeV 
             << "\n at EE : " << std::setw(6) << edepEE/MeV 
             << "\n at HB : " << std::setw(6) << edepHB/MeV 
             << "\n at HE : " << std::setw(6) << edepHE/MeV 
             << "\n at HO : " << std::setw(6) << edepHO/MeV 
             << "\n ---- SimG4HcalValidation: Energy deposit in";
   for (i = 0; i < 5; i++) 
     LogDebug("ValidHcal") << " Depth " << std::setw(2) << i << " E " 
               << std::setw(8) << edepd[i]/MeV << " MeV";
   LogDebug("ValidHcal") << " ---- SimG4HcalValidation: Energy deposit in"
             << "layers";
   for (i = 0; i < 20; i++) 
     LogDebug("ValidHcal") << " Layer " << std::setw(2) << i << " E " 
               << std::setw(8) << edepl[i]/MeV  << " MeV";
 
   product.fillLayers(edepl, edepd, edepHO, edepHB+edepHE, edepEB+edepEE);  
 
   // Hits in HF
   product.fillHF(vhitec, vhithc, enEcal, enHcal);
   LogDebug("ValidHcal") << "SimG4HcalValidation::HF hits " << vhitec 
             << " in EC and " << vhithc << " in HC\n"
             << "                     HB/HE   " << enEcal 
             << " in EC and " << enHcal << " in HC";
 
   // Another HCAL hist to porcess and store separately (a bit more complicated)
   fetchHits(product);
 
   LogDebug("ValidHcal") << " layerAnalysis ===> after fetchHits";
 
 }

void SimG4HcalValidation::nxNAnalysis ( PHcalValidInfoNxN & product )

private

Definition at line 461 of file SimG4HcalValidation.cc.

References collectEnergyRdir(), dEta, dPhi, MillePedeFileConverter_cfg::e, een, stringResolutionProvider_cfi::eta, eta0, PHcalValidInfoNxN::fillEcollectNxN(), PHcalValidInfoNxN::fillHvsE(), PHcalValidInfoNxN::fillTProfileNxN(), HcalBarrel, HcalEndcap, HcalForward, hcalSimParameters_cfi::he, hen, hitcache, hfClusterShapes_cfi::hits, hoen, mps_fire::i, LogDebug, hpstanc_transforms::max, phi, phi0, and lumiQTWidget::t.

Referenced by produce().

                                                                 {
 
   std::vector<CaloHit> * hits = &hitcache;
   std::vector<CaloHit>::iterator hit_itr;
 
   LogDebug("ValidHcal") << "SimG4HcalValidation::NxNAnalysis : entrance ";
 
   collectEnergyRdir(eta0,phi0); // HCAL and ECAL energy in  SimHitCache
                                 // around (eta0,phi0)
 
   LogDebug("ValidHcal") << " NxNAnalysis : coolectEnergyRdir - Ecal " << een 
             << "   Hcal " << hen;
 
   double etot  = 0.;      // total e deposited     in "cluster"
   double ee    = 0.;      // ECAL  e deposited     in "cluster"
   double he    = 0.;      // HCAL  e deposited     in "cluster"
   double hoe   = 0.;      // HO    e deposited     in "cluster"     
 
   int    max   = dEta.size(); // 4
   
   for (hit_itr = hits->begin(); hit_itr < hits->end(); hit_itr++) {
 
     double e     = hit_itr->e();
     double t     = hit_itr->t();
     double eta   = hit_itr->eta();
     double phi   = hit_itr->phi();
     int    type  = hit_itr->det();
     int    layer = hit_itr->layer();
     
     // NxN calulation
     
     if (fabs(eta0-eta) <= dEta[max-1] && fabs(phi0-phi) <= dPhi[max-1]) {
       etot += e;
       if (type == 10 || type == 11 || type == 12)  ee += e;
       if (type  == static_cast<int>(HcalBarrel) ||
       type  == static_cast<int>(HcalEndcap) ||
       type  == static_cast<int>(HcalForward)) { 
     he += e; 
     if (type  == static_cast<int>(HcalBarrel) && layer > 17) hoe += e;
 
     // which concrete i-th square ?
     for (int i = 0; i < max; i++ ) { 
       if ((eta0-eta) <= dEta[i] && (eta0-eta) >= -dEta[i] &&
           (phi0-phi) <= dPhi[i] && (phi0-phi) >= -dPhi[i]) {
 
         LogDebug("ValidHcal") << "SimG4HcalValidation:: nxNAnalysis eta0,"
                   << " phi0 = " << eta0 << " " << phi0 
                   << "   type, layer = " << type << "," 
                   << layer << "  eta, phi = " << eta << " " 
                   << phi;
 
         product.fillTProfileNxN(e, i, t);  
         break;
       }
     }
         // here comes break ...
       }
     }
   }
 
   product.fillEcollectNxN(ee, he, hoe, etot);       
   product.fillHvsE(een, hen, hoen, een+hen);
 
   LogDebug("ValidHcal") << " nxNAnalysis ===> after fillHvsE";
 
 
 }

const SimG4HcalValidation& SimG4HcalValidation::operator= ( const SimG4HcalValidation & )

private

void SimG4HcalValidation::produce	(	edm::Event &	e,
		const edm::EventSetup &
	)

virtual

Implements SimProducer.

Definition at line 99 of file SimG4HcalValidation.cc.

References infolevel, jetAnalysis(), labelJets, labelLayer, labelNxN, layerAnalysis(), eostools::move(), nxNAnalysis(), and edm::Event::put().

                                                                    {
 
   std::unique_ptr<PHcalValidInfoLayer> productLayer(new PHcalValidInfoLayer);
   layerAnalysis(*productLayer);
   e.put(std::move(productLayer),labelLayer);
 
   if (infolevel > 0) {
     std::unique_ptr<PHcalValidInfoNxN> productNxN(new PHcalValidInfoNxN);
     nxNAnalysis(*productNxN);
     e.put(std::move(productNxN),labelNxN);
   }
 
   if (infolevel > 1) {
     std::unique_ptr<PHcalValidInfoJets> productJets(new PHcalValidInfoJets);
     jetAnalysis(*productJets);
     e.put(std::move(productJets),labelJets);
   }
 }

void SimG4HcalValidation::update ( const BeginOfJob * )

privatevirtual

This routine will be called when the appropriate signal arrives.

Implements Observer< const BeginOfJob * >.

Definition at line 153 of file SimG4HcalValidation.cc.

References numberingFromDDD, and org.

Referenced by MatrixUtil.Matrix::__setitem__(), MatrixUtil.Steps::__setitem__(), Vispa.Gui.VispaWidget.VispaWidget::autosize(), Vispa.Views.LineDecayView.LineDecayContainer::createObject(), Vispa.Views.LineDecayView.LineDecayContainer::deselectAllObjects(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::deselectAllWidgets(), Vispa.Gui.VispaWidget.VispaWidget::enableAutosizing(), Vispa.Gui.MenuWidget.MenuWidget::leaveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseMoveEvent(), Vispa.Gui.MenuWidget.MenuWidget::mouseMoveEvent(), Vispa.Views.LineDecayView.LineDecayContainer::mouseMoveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseReleaseEvent(), Vispa.Views.LineDecayView.LineDecayContainer::objectMoved(), MatrixUtil.Steps::overwrite(), Vispa.Views.LineDecayView.LineDecayContainer::removeObject(), Vispa.Gui.ConnectableWidget.ConnectableWidget::removePorts(), Vispa.Gui.FindDialog.FindDialog::reset(), Vispa.Gui.PortConnection.PointToPointConnection::select(), Vispa.Gui.VispaWidget.VispaWidget::select(), Vispa.Views.LineDecayView.LineDecayContainer::select(), Vispa.Gui.VispaWidget.VispaWidget::setText(), Vispa.Gui.VispaWidget.VispaWidget::setTitle(), Vispa.Gui.ZoomableWidget.ZoomableWidget::setZoom(), Vispa.Views.LineDecayView.LineDecayContainer::setZoom(), and Vispa.Gui.PortConnection.PointToPointConnection::updateConnection().

                                                        {
 
   // Numbering From DDD
   edm::ESHandle<HcalDDDSimConstants>    hdc;
   (*job)()->get<HcalSimNumberingRecord>().get(hdc);
   HcalDDDSimConstants *hcons = (HcalDDDSimConstants*)(&(*hdc));
   edm::LogInfo("ValidHcal") << "HcalTestAnalysis:: Initialise "
                 << "HcalNumberingFromDDD";
   numberingFromDDD = new HcalNumberingFromDDD(hcons);
 
   // Numbering scheme
   org              = new HcalTestNumberingScheme(false);
 
 }

void SimG4HcalValidation::update ( const BeginOfRun * )

privatevirtual

This routine will be called when the appropriate signal arrives.

Implements Observer< const BeginOfRun * >.

Definition at line 168 of file SimG4HcalValidation.cc.

References names, org, sd, HCalSD::setNumberingScheme(), and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by MatrixUtil.Matrix::__setitem__(), MatrixUtil.Steps::__setitem__(), Vispa.Gui.VispaWidget.VispaWidget::autosize(), Vispa.Views.LineDecayView.LineDecayContainer::createObject(), Vispa.Views.LineDecayView.LineDecayContainer::deselectAllObjects(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::deselectAllWidgets(), Vispa.Gui.VispaWidget.VispaWidget::enableAutosizing(), Vispa.Gui.MenuWidget.MenuWidget::leaveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseMoveEvent(), Vispa.Gui.MenuWidget.MenuWidget::mouseMoveEvent(), Vispa.Views.LineDecayView.LineDecayContainer::mouseMoveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseReleaseEvent(), Vispa.Views.LineDecayView.LineDecayContainer::objectMoved(), MatrixUtil.Steps::overwrite(), Vispa.Views.LineDecayView.LineDecayContainer::removeObject(), Vispa.Gui.ConnectableWidget.ConnectableWidget::removePorts(), Vispa.Gui.FindDialog.FindDialog::reset(), Vispa.Gui.PortConnection.PointToPointConnection::select(), Vispa.Gui.VispaWidget.VispaWidget::select(), Vispa.Views.LineDecayView.LineDecayContainer::select(), Vispa.Gui.VispaWidget.VispaWidget::setText(), Vispa.Gui.VispaWidget.VispaWidget::setTitle(), Vispa.Gui.ZoomableWidget.ZoomableWidget::setZoom(), Vispa.Views.LineDecayView.LineDecayContainer::setZoom(), and Vispa.Gui.PortConnection.PointToPointConnection::updateConnection().

                                                        {
 
   int irun = (*run)()->GetRunID();
   
   edm::LogInfo("ValidHcal") <<" =====> Begin of Run = " << irun;
  
   std::string  sdname = names[0];
   G4SDManager* sd     = G4SDManager::GetSDMpointerIfExist();
   if (sd != 0) {
     G4VSensitiveDetector* aSD = sd->FindSensitiveDetector(sdname);
     if (aSD==0) {
       edm::LogWarning("ValidHcal") << "SimG4HcalValidation::beginOfRun: No SD"
                    << " with name " << sdname << " in this "
                    << "Setup";
     } else {
       HCalSD* theCaloSD = dynamic_cast<HCalSD*>(aSD);
       edm::LogInfo("ValidHcal") << "SimG4HcalValidation::beginOfRun: Finds SD"
                 << "with name " << theCaloSD->GetName() 
                 << " in this Setup";
       if (org) {
         theCaloSD->setNumberingScheme(org);
         edm::LogInfo("ValidHcal") << "SimG4HcalValidation::beginOfRun: set a "
                   << "new numbering scheme";
       }
     }
   } else {
     edm::LogWarning("ValidHcal") << "SimG4HcalValidation::beginOfRun: Could "
                  << "not get SD Manager!";
   }
 
 }

void SimG4HcalValidation::update ( const BeginOfEvent * )

privatevirtual

This routine will be called when the appropriate signal arrives.

Implements Observer< const BeginOfEvent * >.

Definition at line 201 of file SimG4HcalValidation.cc.

References clear(), edepd, edepEB, edepEE, edepHB, edepHE, edepHO, edepl, enEcal, enHcal, mps_fire::i, LogDebug, vhitec, and vhithc.

Referenced by MatrixUtil.Matrix::__setitem__(), MatrixUtil.Steps::__setitem__(), Vispa.Gui.VispaWidget.VispaWidget::autosize(), Vispa.Views.LineDecayView.LineDecayContainer::createObject(), Vispa.Views.LineDecayView.LineDecayContainer::deselectAllObjects(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::deselectAllWidgets(), Vispa.Gui.VispaWidget.VispaWidget::enableAutosizing(), Vispa.Gui.MenuWidget.MenuWidget::leaveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseMoveEvent(), Vispa.Gui.MenuWidget.MenuWidget::mouseMoveEvent(), Vispa.Views.LineDecayView.LineDecayContainer::mouseMoveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseReleaseEvent(), Vispa.Views.LineDecayView.LineDecayContainer::objectMoved(), MatrixUtil.Steps::overwrite(), Vispa.Views.LineDecayView.LineDecayContainer::removeObject(), Vispa.Gui.ConnectableWidget.ConnectableWidget::removePorts(), Vispa.Gui.FindDialog.FindDialog::reset(), Vispa.Gui.PortConnection.PointToPointConnection::select(), Vispa.Gui.VispaWidget.VispaWidget::select(), Vispa.Views.LineDecayView.LineDecayContainer::select(), Vispa.Gui.VispaWidget.VispaWidget::setText(), Vispa.Gui.VispaWidget.VispaWidget::setTitle(), Vispa.Gui.ZoomableWidget.ZoomableWidget::setZoom(), Vispa.Views.LineDecayView.LineDecayContainer::setZoom(), and Vispa.Gui.PortConnection.PointToPointConnection::updateConnection().

                                                          {
  
   int i = 0;
   edepEB = edepEE = edepHB = edepHE = edepHO = 0.;
   for (i = 0; i < 5;  i++) edepd[i] = 0.;
   for (i = 0; i < 20; i++) edepl[i] = 0.;
   vhitec = vhithc = enEcal = enHcal = 0;  
   // Cache reset  
   clear();
 
   int iev = (*evt)()->GetEventID();
   LogDebug("ValidHcal") << "SimG4HcalValidation: =====> Begin of event = "
             << iev;
 }

void SimG4HcalValidation::update ( const G4Step * )

privatevirtual

This routine will be called when the appropriate signal arrives.

Implements Observer< const G4Step * >.

Definition at line 217 of file SimG4HcalValidation.cc.

References particleFlowClusterECALTimeSelected_cfi::depth, edepd, edepEB, edepEE, edepHB, edepHE, edepHO, edepl, LogDebug, MeV, dataset::name, and NULL.

Referenced by MatrixUtil.Matrix::__setitem__(), MatrixUtil.Steps::__setitem__(), Vispa.Gui.VispaWidget.VispaWidget::autosize(), Vispa.Views.LineDecayView.LineDecayContainer::createObject(), Vispa.Views.LineDecayView.LineDecayContainer::deselectAllObjects(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::deselectAllWidgets(), Vispa.Gui.VispaWidget.VispaWidget::enableAutosizing(), Vispa.Gui.MenuWidget.MenuWidget::leaveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseMoveEvent(), Vispa.Gui.MenuWidget.MenuWidget::mouseMoveEvent(), Vispa.Views.LineDecayView.LineDecayContainer::mouseMoveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseReleaseEvent(), Vispa.Views.LineDecayView.LineDecayContainer::objectMoved(), MatrixUtil.Steps::overwrite(), Vispa.Views.LineDecayView.LineDecayContainer::removeObject(), Vispa.Gui.ConnectableWidget.ConnectableWidget::removePorts(), Vispa.Gui.FindDialog.FindDialog::reset(), Vispa.Gui.PortConnection.PointToPointConnection::select(), Vispa.Gui.VispaWidget.VispaWidget::select(), Vispa.Views.LineDecayView.LineDecayContainer::select(), Vispa.Gui.VispaWidget.VispaWidget::setText(), Vispa.Gui.VispaWidget.VispaWidget::setTitle(), Vispa.Gui.ZoomableWidget.ZoomableWidget::setZoom(), Vispa.Views.LineDecayView.LineDecayContainer::setZoom(), and Vispa.Gui.PortConnection.PointToPointConnection::updateConnection().

                                                      {
 
   if (aStep != NULL) {
     G4VPhysicalVolume* curPV  = aStep->GetPreStepPoint()->GetPhysicalVolume();
     G4String name = curPV->GetName();
     name.assign(name,0,3);
     double edeposit = aStep->GetTotalEnergyDeposit();
     int    layer=-1,  depth=-1;
     if (name == "EBR") {
       depth = 0;
       edepEB += edeposit;
     } else if (name == "EFR") {
       depth = 0;
       edepEE += edeposit;
     } else if (name == "HBS") {
       layer = (curPV->GetCopyNo()/10)%100;
       depth = (curPV->GetCopyNo())%10 + 1;
       if (depth > 0 && depth < 4 && layer >= 0 && layer < 17) {
     edepHB += edeposit;
       } else {
     edm::LogWarning("ValidHcal") << "SimG4HcalValidation:Error " 
                      << curPV->GetName() << curPV->GetCopyNo();
     depth = -1; layer = -1;
       }
     } else if (name == "HES") {
       layer = (curPV->GetCopyNo()/10)%100;
       depth = (curPV->GetCopyNo())%10 + 1;
       if (depth > 0 && depth < 3 && layer >= 0 && layer < 19) {
     edepHE += edeposit;
       } else {
     edm::LogWarning("ValidHcal") << "SimG4HcalValidation:Error " 
                      << curPV->GetName() << curPV->GetCopyNo();
     depth = -1; layer = -1;
       }
     } else if (name == "HTS") {
       layer = (curPV->GetCopyNo()/10)%100;
       depth = (curPV->GetCopyNo())%10 + 1;
       if (depth > 3 && depth < 5 && layer >= 17 && layer < 20) {
     edepHO += edeposit;
        } else {
      edm::LogWarning("ValidHcal") << "SimG4HcalValidation:Error " 
                       << curPV->GetName() <<curPV->GetCopyNo();
      depth = -1; layer = -1;
        }
     }
     if (depth >= 0 && depth < 5)  edepd[depth] += edeposit;
     if (layer >= 0 && layer < 20) edepl[layer] += edeposit;
 
     if (layer >= 0 && layer < 20) {
       LogDebug("ValidHcal") << "SimG4HcalValidation:: G4Step: " << name 
                 << " Layer " << std::setw(3) << layer << " Depth "
                 << std::setw(2) << depth << " Edep " <<std::setw(6)
                 << edeposit/MeV << " MeV";
     }
   }
 }

void SimG4HcalValidation::update ( const EndOfEvent * )

privatevirtual

This routine will be called when the appropriate signal arrives.

Implements Observer< const EndOfEvent * >.

Definition at line 275 of file SimG4HcalValidation.cc.

References count, fill(), and LogDebug.

Referenced by MatrixUtil.Matrix::__setitem__(), MatrixUtil.Steps::__setitem__(), Vispa.Gui.VispaWidget.VispaWidget::autosize(), Vispa.Views.LineDecayView.LineDecayContainer::createObject(), Vispa.Views.LineDecayView.LineDecayContainer::deselectAllObjects(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::deselectAllWidgets(), Vispa.Gui.VispaWidget.VispaWidget::enableAutosizing(), Vispa.Gui.MenuWidget.MenuWidget::leaveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseMoveEvent(), Vispa.Gui.MenuWidget.MenuWidget::mouseMoveEvent(), Vispa.Views.LineDecayView.LineDecayContainer::mouseMoveEvent(), Vispa.Gui.VispaWidgetOwner.VispaWidgetOwner::mouseReleaseEvent(), Vispa.Views.LineDecayView.LineDecayContainer::objectMoved(), MatrixUtil.Steps::overwrite(), Vispa.Views.LineDecayView.LineDecayContainer::removeObject(), Vispa.Gui.ConnectableWidget.ConnectableWidget::removePorts(), Vispa.Gui.FindDialog.FindDialog::reset(), Vispa.Gui.PortConnection.PointToPointConnection::select(), Vispa.Gui.VispaWidget.VispaWidget::select(), Vispa.Views.LineDecayView.LineDecayContainer::select(), Vispa.Gui.VispaWidget.VispaWidget::setText(), Vispa.Gui.VispaWidget.VispaWidget::setTitle(), Vispa.Gui.ZoomableWidget.ZoomableWidget::setZoom(), Vispa.Views.LineDecayView.LineDecayContainer::setZoom(), and Vispa.Gui.PortConnection.PointToPointConnection::updateConnection().

                                                        {
 
   count++;
 
   // Fill hits cache for jetfinding etc.
   fill(evt);
   LogDebug("ValidHcal") << "SimG4HcalValidation:: ---  after Fill ";
 }