TopDiLeptonHLTOfflineDQM Class Reference

define MonitorDiLepton to be used More...

#include <TopDiLeptonHLTOfflineDQM.h>

Inheritance diagram for TopDiLeptonHLTOfflineDQM:

Public Member Functions
virtual void	analyze (const edm::Event &event, const edm::EventSetup &setup) override
void	bookHistograms (DQMStore::IBooker &i, edm::Run const &, edm::EventSetup const &) override
virtual void	dqmBeginRun (const edm::Run &r, const edm::EventSetup &c) override
	do this during the event loop More...
	TopDiLeptonHLTOfflineDQM (const edm::ParameterSet &cfg)
	default constructor More...
	~TopDiLeptonHLTOfflineDQM ()
	default destructor More...
Public Member Functions inherited from DQMEDAnalyzer
virtual void	beginRun (edm::Run const &, edm::EventSetup const &) final
virtual void	beginStream (edm::StreamID id) final
virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)
	DQMEDAnalyzer (void)
virtual void	endLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, dqmDetails::NoCache *) const final
virtual void	endRunSummary (edm::Run const &, edm::EventSetup const &, dqmDetails::NoCache *) const final
uint32_t	streamId () const
Public Member Functions inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
	EDAnalyzer ()=default
Public Member Functions inherited from edm::stream::EDAnalyzerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)
	EDAnalyzerBase ()
ModuleDescription const &	moduleDescription () const
virtual	~EDAnalyzerBase ()
Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const
	EDConsumerBase ()
	EDConsumerBase (EDConsumerBase const &)=delete
	EDConsumerBase (EDConsumerBase &&)=default
ProductResolverIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const
void	itemsMayGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const
void	itemsToGet (BranchType, std::vector< ProductResolverIndexAndSkipBit > &) const
std::vector< ProductResolverIndexAndSkipBit > const &	itemsToGetFrom (BranchType iType) const
void	labelsForToken (EDGetToken iToken, Labels &oLabels) const
void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const
EDConsumerBase const &	operator= (EDConsumerBase const &)=delete
EDConsumerBase &	operator= (EDConsumerBase &&)=default
bool	registeredToConsume (ProductResolverIndex, bool, BranchType) const
bool	registeredToConsumeMany (TypeID const &, BranchType) const
void	updateLookup (BranchType iBranchType, ProductResolverIndexHelper const &, bool iPrefetchMayGet)
virtual	~EDConsumerBase () noexcept(false)

Private Member Functions
std::string	objectType (const std::string &label)
std::string	selectionStep (const std::string &label)

Private Attributes
edm::EDGetTokenT< reco::BeamSpot >	beamspot_
	beamspot More...
StringCutObjectSelector< reco::BeamSpot > *	beamspotSelect_
	string cut selector More...
HLTConfigProvider	hltConfig_
std::map< std::string, std::pair< edm::ParameterSet, HLTOfflineDQMTopDiLepton::MonitorDiLepton * > >	selection_
std::vector< std::string >	selectionOrder_
std::map< std::string, SelectionStepHLTBase * >	selectmap_
std::vector< std::string >	triggerPaths_
	trigger paths More...
edm::EDGetTokenT< edm::TriggerResults >	triggerTable_
	trigger table More...
edm::EDGetTokenT< std::vector< reco::Vertex > >	vertex_
	primary vertex More...
StringCutObjectSelector< reco::Vertex > *	vertexSelect_
	string cut selector More...

Additional Inherited Members
Public Types inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
typedef CacheContexts< T... >	CacheTypes
typedef CacheTypes::GlobalCache	GlobalCache
typedef AbilityChecker< T... >	HasAbility
typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache
typedef LuminosityBlockContextT< LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext
typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache
typedef CacheTypes::RunCache	RunCache
typedef RunContextT< RunCache, GlobalCache >	RunContext
typedef CacheTypes::RunSummaryCache	RunSummaryCache
Public Types inherited from edm::stream::EDAnalyzerBase
typedef EDAnalyzerAdaptorBase	ModuleType
Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels
Static Public Member Functions inherited from DQMEDAnalyzer
static std::shared_ptr< dqmDetails::NoCache >	globalBeginLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *)
static std::shared_ptr< dqmDetails::NoCache >	globalBeginRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *)
static void	globalEndLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *, dqmDetails::NoCache *)
static void	globalEndRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *, dqmDetails::NoCache *)
Static Public Member Functions inherited from edm::stream::EDAnalyzerBase
static const std::string &	baseType ()
static void	fillDescriptions (ConfigurationDescriptions &descriptions)
static void	prevalidate (ConfigurationDescriptions &descriptions)
Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)
EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)
template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)
ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...
template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()
void	consumesMany (const TypeToGet &id)
template<BranchType B>
void	consumesMany (const TypeToGet &id)
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)
template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

define MonitorDiLepton to be used

Module to apply a monitored selection of top like events in the di-leptonic channel.

Plugin to apply a monitored selection of top like events with some minimal flexibility in the number and definition of the selection steps. To achieve this flexibility it employes the SelectionStep class. The MonitorDiLepton class is used to provide a well defined set of histograms to be monitored after each selection step. The SelectionStep class provides a flexible and intuitive selection via the StringCutParser. SelectionStep and MonitorDiLepton classes are interleaved. The monitoring starts after a preselection step (which is not monitored in the context of this module) with an instance of the MonitorDiLepton class. The following objects are supported for selection:

• jets : of type reco::Jet
• elecs : of type reco::GsfElectron
• muons : of type reco::Muon
• met : of type reco::MET

These types have to be present as prefix of the selection step paramter label separated from the rest of the label by a ':' (e.g. in the form "jets:step0"). The class expects selection labels of this type. They will be disentangled by the private helper functions objectType and seletionStep as declared below.

Definition at line 252 of file TopDiLeptonHLTOfflineDQM.h.

Constructor & Destructor Documentation

TopDiLeptonHLTOfflineDQM::TopDiLeptonHLTOfflineDQM

(

const edm::ParameterSet &

cfg

)

default constructor

Definition at line 795 of file TopDiLeptonHLTOfflineDQM.cc.

References hiMultiTrackSelector_cfi::beamspot, beamspot_, beamspotSelect_, edm::EDConsumerBase::consumesCollector(), edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), mps_fire::i, crabWrapper::key, objectType(), alignCSCRings::s, selection_, selectionOrder_, selectionStep(), selectmap_, AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, vertex_, and vertexSelect_.

                                                                            : vertexSelect_(0), beamspotSelect_(0)
{
  // configure the preselection
  edm::ParameterSet presel=cfg.getParameter<edm::ParameterSet>("preselection");
  if( presel.existsAs<edm::ParameterSet>("trigger") ){
    edm::ParameterSet trigger=presel.getParameter<edm::ParameterSet>("trigger");
    triggerTable_= consumes< edm::TriggerResults >(trigger.getParameter<edm::InputTag>("src"));
    triggerPaths_=trigger.getParameter<std::vector<std::string> >("select");
  } 
  if( presel.existsAs<edm::ParameterSet>("vertex" ) ){
    edm::ParameterSet vertex=presel.getParameter<edm::ParameterSet>("vertex");
    vertex_= consumes< std::vector<reco::Vertex> >(vertex.getParameter<edm::InputTag>("src"));
    vertexSelect_= new StringCutObjectSelector<reco::Vertex>(vertex.getParameter<std::string>("select"));
  }
  if( presel.existsAs<edm::ParameterSet>("beamspot" ) ){
    edm::ParameterSet beamspot=presel.getParameter<edm::ParameterSet>("beamspot");
    beamspot_= consumes< reco::BeamSpot >(beamspot.getParameter<edm::InputTag>("src"));
    beamspotSelect_= new StringCutObjectSelector<reco::BeamSpot>(beamspot.getParameter<std::string>("select"));
  }

  // configure the selection
  std::vector<edm::ParameterSet> sel=cfg.getParameter<std::vector<edm::ParameterSet> >("selection");
  for(unsigned int i=0; i<sel.size(); ++i){
    selectionOrder_.push_back(sel.at(i).getParameter<std::string>("label"));
    selection_[selectionStep(selectionOrder_.back())] = std::make_pair(sel.at(i), new HLTOfflineDQMTopDiLepton::MonitorDiLepton(selectionStep(selectionOrder_.back()).c_str(), cfg.getParameter<edm::ParameterSet>("setup"), consumesCollector()));
  }

  for (const std::string& s: selectionOrder_) {
    std::string key = selectionStep(s), type = objectType(s);

    if (selection_.find(key) == selection_.end())
      continue;

    if (type == "muons"){
      selectmap_[type] = new SelectionStepHLT<reco::Muon>(selection_[key].first, consumesCollector());
    }
    if (type == "elecs"){
      selectmap_[type] = new SelectionStepHLT<reco::GsfElectron>(selection_[key].first, consumesCollector());
    }
    if (type == "jets"){
      selectmap_[type] = new SelectionStepHLT<reco::Jet>(selection_[key].first, consumesCollector());
    }
    if (type == "jets/pf"){
      selectmap_[type] = new SelectionStepHLT<reco::PFJet>(selection_[key].first, consumesCollector());
    }
    if (type == "jets/calo"){
      selectmap_[type] = new SelectionStepHLT<reco::CaloJet>(selection_[key].first, consumesCollector());
    }
    if (type == "met"){
      selectmap_[type] = new SelectionStepHLT<reco::MET>(selection_[key].first, consumesCollector());
    }
  }
}

TopDiLeptonHLTOfflineDQM::~TopDiLeptonHLTOfflineDQM ( )

inline

default destructor

Definition at line 257 of file TopDiLeptonHLTOfflineDQM.h.

References Vispa.Share.Profiling::analyze(), bookHistograms(), EnergyCorrector::c, mps_fire::i, alignCSCRings::r, and GeneralSetup::setup().

                               { 
      if( beamspotSelect_ ) delete beamspotSelect_; 
      if( vertexSelect_ ) delete vertexSelect_;
    }

Member Function Documentation

void TopDiLeptonHLTOfflineDQM::analyze ( const edm::Event &  event, const edm::EventSetup &  setup  )

overridevirtual

Definition at line 866 of file TopDiLeptonHLTOfflineDQM.cc.

References acceptHLT(), hiMultiTrackSelector_cfi::beamspot, beamspot_, beamspotSelect_, edm::Event::getByToken(), hltConfig_, edm::EDGetTokenT< T >::isUninitialized(), crabWrapper::key, objectType(), TauGenJetsDecayModeSelectorAllHadrons_cfi::select, selection_, selectionOrder_, selectionStep(), selectmap_, AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, triggerTable_, and vertex_.

{ 
  if(!triggerTable_.isUninitialized()){
    edm::Handle<edm::TriggerResults> triggerTable;
    if( !event.getByToken(triggerTable_, triggerTable) ) return;
    if(!acceptHLT(event, *triggerTable, triggerPaths_)) return;
  }
  if(!vertex_.isUninitialized()){
    edm::Handle<std::vector<reco::Vertex> > vertex;
    if( !event.getByToken(vertex_, vertex) ) return;
    if(vertex->empty() || !(*vertexSelect_)(vertex->front())) return;
  }
  if(!beamspot_.isUninitialized()){
    edm::Handle<reco::BeamSpot> beamspot;
    if( !event.getByToken(beamspot_, beamspot) ) return;
    if(!(*beamspotSelect_)(*beamspot)) return;
  }
  // apply selection steps
  for(std::vector<std::string>::const_iterator selIt=selectionOrder_.begin(); selIt!=selectionOrder_.end(); ++selIt){
    std::string key = selectionStep(*selIt), type = objectType(*selIt);
    if(selection_.find(key)!=selection_.end()){

      if(type=="empty"){
        selection_[key].second->fill(event, setup, hltConfig_, triggerPaths_);
        continue;
      }
      if(type=="Hlt" ){
        selection_[key].second->fill(event, setup, hltConfig_, triggerPaths_);
        continue;
      }

      bool passSel = true;

      for(std::vector<std::string>::const_iterator selIt2=selectionOrder_.begin(); selIt2<=selIt; ++selIt2){
        std::string key2 = selectionStep(*selIt2), type2 = objectType(*selIt2);
        if(selection_.find(key2)==selection_.end()) continue;

        if(type2=="Hlt" || type2=="empty" ) continue;
        if (!selectmap_[type2]->select(event)) passSel=false;

      } // end 2nd loop

      // Apply cumulative event selection
      if ( !passSel ) continue;

      selection_[key].second->fill(event, setup, hltConfig_, triggerPaths_);

    }
  }
}

void TopDiLeptonHLTOfflineDQM::bookHistograms ( DQMStore::IBooker &  i, edm::Run const &  , edm::EventSetup const &    )

overridevirtual

Implements DQMEDAnalyzer.

Definition at line 918 of file TopDiLeptonHLTOfflineDQM.cc.

References selection_.

{
  for (auto& sel: selection_) {
    sel.second.second->book(i);
  }
}

void TopDiLeptonHLTOfflineDQM::dqmBeginRun ( const edm::Run &  r, const edm::EventSetup &  c  )

overridevirtual

do this during the event loop

Definition at line 850 of file TopDiLeptonHLTOfflineDQM.cc.

References hltConfig_, HLTConfigProvider::init(), and HLTConfigProvider::processName().

{
  using namespace std;
  using namespace edm;

  bool changed(true);
  if (!hltConfig_.init(iRun,iSetup,"*",changed)) {
    edm::LogWarning( "TopSingleLeptonHLTOfflineDQM" ) 
      << "Config extraction failure with process name "
      << hltConfig_.processName()
      << "\n";
    return;
  }
}

std::string TopDiLeptonHLTOfflineDQM::objectType ( const std::string &  label )

inlineprivate

deduce object type from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 270 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

{ return label.substr(0, label.find(':')); };  

std::string TopDiLeptonHLTOfflineDQM::selectionStep ( const std::string &  label )

inlineprivate

deduce selection step from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 273 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

{ return label.substr(label.find(':')+1); };  

Member Data Documentation

edm::EDGetTokenT< reco::BeamSpot > TopDiLeptonHLTOfflineDQM::beamspot_

private

beamspot

Definition at line 285 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

StringCutObjectSelector<reco::BeamSpot>* TopDiLeptonHLTOfflineDQM::beamspotSelect_

private

string cut selector

Definition at line 287 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

HLTConfigProvider TopDiLeptonHLTOfflineDQM::hltConfig_

private

Definition at line 289 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and dqmBeginRun().

std::map<std::string, std::pair<edm::ParameterSet, HLTOfflineDQMTopDiLepton::MonitorDiLepton*> > TopDiLeptonHLTOfflineDQM::selection_

private

this is the heart component of the plugin; std::string keeps a label the selection step for later identification, edm::ParameterSet keeps the configuration of the selection for the SelectionStep class, MonitoringEnsemble keeps an instance of the MonitorDiLepton class to be filled after each selection step

Definition at line 299 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), bookHistograms(), and TopDiLeptonHLTOfflineDQM().

std::vector<std::string> TopDiLeptonHLTOfflineDQM::selectionOrder_

private

needed to guarantee the selection order as defined by the order of ParameterSets in the selection vector as defined in the config

Definition at line 293 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

std::map<std::string, SelectionStepHLTBase*> TopDiLeptonHLTOfflineDQM::selectmap_

private

Definition at line 301 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

std::vector<std::string> TopDiLeptonHLTOfflineDQM::triggerPaths_

private

trigger paths

Definition at line 279 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

edm::EDGetTokenT< edm::TriggerResults > TopDiLeptonHLTOfflineDQM::triggerTable_

private

trigger table

Definition at line 273 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

edm::EDGetTokenT< std::vector<reco::Vertex> > TopDiLeptonHLTOfflineDQM::vertex_

private

primary vertex

Definition at line 281 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by analyze(), and TopDiLeptonHLTOfflineDQM().

StringCutObjectSelector<reco::Vertex>* TopDiLeptonHLTOfflineDQM::vertexSelect_

private

string cut selector

Definition at line 283 of file TopDiLeptonHLTOfflineDQM.h.

Referenced by TopDiLeptonHLTOfflineDQM().