ThreadSafeLogMessageLoggerScribe.cc

Go to the documentation of this file.

// ----------------------------------------------------------------------
//
// ThreadSafeLogMessageLoggerScribe.cc
//
// NOTE: This was originally copied from MessageLoggerScribe but removed
//  the potential use of the ThreadQueue. MessageLoggerScribe was not
//  modified since it was decided we might have to keep the old behaviour
//  around for 'legacy' reasons.
//
// ----------------------------------------------------------------------

#include "FWCore/MessageService/interface/ThreadSafeLogMessageLoggerScribe.h"
#include "FWCore/MessageService/interface/ELadministrator.h"
#include "FWCore/MessageService/interface/ELoutput.h"
#include "FWCore/MessageService/interface/ELstatistics.h"
#include "FWCore/MessageService/interface/NamedDestination.h"
#include "FWCore/MessageService/interface/ThreadQueue.h"

#include "FWCore/MessageLogger/interface/ErrorObj.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/MessageLogger/interface/ConfigurationHandshake.h"
#include "FWCore/MessageLogger/interface/MessageDrop.h"     // change log 37
#include "FWCore/MessageLogger/interface/ELseverityLevel.h" // change log 37

#include "FWCore/Utilities/interface/EDMException.h"
#include "FWCore/Utilities/interface/Algorithms.h"

#include <algorithm>
#include <cassert>
#include <fstream>
#include <string>
#include <signal.h>

using std::cerr;

namespace edm {
  namespace service {
    
    
    ThreadSafeLogMessageLoggerScribe::ThreadSafeLogMessageLoggerScribe()
    : admin_p   ( new ELadministrator() )
    , early_dest( admin_p->attach(ELoutput(std::cerr, false)) )
    , file_ps   ( )
    , job_pset_p( )
    , extern_dests( )
    , clean_slate_configuration( true )
    , active( true )
    , purge_mode (false)                        // changeLog 32
    , count (false)                         // changeLog 32
    , m_messageBeingSent(false)
    {
    }
    
    ThreadSafeLogMessageLoggerScribe::~ThreadSafeLogMessageLoggerScribe()
    {
      //if there are any waiting message, finish them off
      ErrorObj* errorobj_p=nullptr;
      std::vector<std::string> categories;
      while(m_waitingMessages.try_pop(errorobj_p)) {
        if(not purge_mode) {
          categories.clear();
          parseCategories(errorobj_p->xid().id, categories);
          for (unsigned int icat = 0; icat < categories.size(); ++icat) {
            errorobj_p->setID(categories[icat]);
            admin_p->log( *errorobj_p );  // route the message text
          }
        }
        delete errorobj_p;
      }
      
      admin_p->finish();
      assert( extern_dests.empty() );  // nothing to do
    }
    
    void
    ThreadSafeLogMessageLoggerScribe::runCommand(               // changeLog 32
                                                 MessageLoggerQ::OpCode  opcode,
                                                 void * operand)
    {
      switch(opcode)  {  // interpret the work item
        default:  {
          assert(false);  // can't happen (we certainly hope!)
          break;
        }
        case MessageLoggerQ::END_THREAD:  {
          break;
        }
        case MessageLoggerQ::LOG_A_MESSAGE:  {
          ErrorObj *  errorobj_p = static_cast<ErrorObj *>(operand);
          try {
            if(active && !purge_mode){
              log (errorobj_p);
            }
          }
          catch(cms::Exception& e)
          {
            ++count;
            std::cerr << "ThreadSafeLogMessageLoggerScribe caught " << count
            << " cms::Exceptions, text = \n"
            << e.what() << "\n";
            
            if(count > 25)
            {
              cerr << "MessageLogger will no longer be processing "
              << "messages due to errors (entering purge mode).\n";
              purge_mode = true;
            }
          }
          catch(...)
          {
            std::cerr << "ThreadSafeLogMessageLoggerScribe caught an unknown exception and "
            << "will no longer be processing "
            << "messages. (entering purge mode)\n";
            purge_mode = true;
          }
          break;
        }
        case MessageLoggerQ::CONFIGURE:  {          // changelog 17
          job_pset_p = std::shared_ptr<PSet>(static_cast<PSet*>(operand)); // propagate_const<T> has no reset() function
          configure_errorlog();
          break;
        }
        case MessageLoggerQ::EXTERN_DEST: {
          try {
            extern_dests.push_back( static_cast<NamedDestination *>(operand) );
            configure_external_dests();
          }
          catch(cms::Exception& e)              // change log 21
          {
            std::cerr << "ThreadSafeLogMessageLoggerScribe caught a cms::Exception "
            << "during extern dest configuration:\n"
            << e.what() << "\n"
            << "This is a serious problem, and the extern dest "
            << "will not be produced.\n"
            << "However, the rest of the logger continues to run.\n";
          }
          catch(...)                        // change log 21
          {
            std::cerr << "ThreadSafeLogMessageLoggerScribe caught unkonwn exception type\n"
            << "during extern dest configuration. "
            << "This is a serious problem, and the extern dest "
            << "will not be produced.\n"
            << "The rest of the logger will attempt to continue to run.\n";
          }
          break;
        }
        case MessageLoggerQ::SUMMARIZE: {
          assert( operand == 0 );
          try {
            triggerStatisticsSummaries();
          }
          catch(cms::Exception& e)
          {
            std::cerr << "ThreadSafeLogMessageLoggerScribe caught exception "
            << "during summarize:\n"
            << e.what() << "\n";
          }
          catch(...)
          {
            std::cerr << "ThreadSafeLogMessageLoggerScribe caught unkonwn exception type "
            << "during summarize. (Ignored)\n";
          }
          break;
        }
        case MessageLoggerQ::JOBMODE:  {            // change log 24
          std::string* jobMode_p =
          static_cast<std::string*>(operand);
          JobMode jm = MessageLoggerDefaults::mode(*jobMode_p);
          messageLoggerDefaults =
          value_ptr<MessageLoggerDefaults>(new MessageLoggerDefaults(jm));
          // Note - since messageLoggerDefaults is a value_ptr,
          //        there is no concern about deleting here.
          delete jobMode_p;  // dispose of the message text
                             // which will have been new-ed
                             // in MessageLogger.cc (service version)
          break;
        }
        case MessageLoggerQ::SHUT_UP:  {
          assert( operand == 0 );
          active = false;
          break;
        }
        case MessageLoggerQ::FLUSH_LOG_Q:  {            // changelog 26
          break;
        }
        case MessageLoggerQ::GROUP_STATS:  {            // change log 27
          std::string* cat_p =
          static_cast<std::string*>(operand);
          ELstatistics::noteGroupedCategory(*cat_p);
          delete cat_p;  // dispose of the message text
          break;
        }
        case MessageLoggerQ::FJR_SUMMARY:  {            // changelog 29
          std::map<std::string, double> * smp =
          static_cast<std::map<std::string, double> *>(operand);
          triggerFJRmessageSummary(*smp);
          break;
        }
      }  // switch
      
    }  // ThreadSafeLogMessageLoggerScribe::runCommand(opcode, operand)
    
    void ThreadSafeLogMessageLoggerScribe::log ( ErrorObj *  errorobj_p ) {
      bool expected = false;
      std::unique_ptr<ErrorObj> obj(errorobj_p);
      if(m_messageBeingSent.compare_exchange_strong(expected,true)) {
        std::vector<std::string> categories;
        parseCategories(errorobj_p->xid().id, categories);
        for (unsigned int icat = 0; icat < categories.size(); ++icat) {
          errorobj_p->setID(categories[icat]);
          admin_p->log( *errorobj_p );  // route the message text
        }
        //process any waiting messages
        errorobj_p=nullptr;
        while(not purge_mode and m_waitingMessages.try_pop(errorobj_p)) {
          obj.reset(errorobj_p);
          categories.clear();
          parseCategories(errorobj_p->xid().id, categories);
          for (unsigned int icat = 0; icat < categories.size(); ++icat) {
            errorobj_p->setID(categories[icat]);
            admin_p->log( *errorobj_p );  // route the message text
          }
        }
        m_messageBeingSent.store(false);
      } else {
        obj.release();
        m_waitingMessages.push(errorobj_p);
      }
    }
    
    void
    ThreadSafeLogMessageLoggerScribe::configure_errorlog()
    {
      vString  empty_vString;
      String   empty_String;
      PSet     empty_PSet;
      
      // The following is present to test pre-configuration message handling:
      String preconfiguration_message
      = getAparameter<String>
      (*job_pset_p, "generate_preconfiguration_message", empty_String);
      if (preconfiguration_message != empty_String) {
        // To test a preconfiguration message without first going thru the
        // configuration we are about to do, we issue the message (so it sits
        // on the queue), then copy the processing that the LOG_A_MESSAGE case
        // does.  We suppress the timestamp to allow for automated unit testing.
        early_dest.suppressTime();
        LogError ("preconfiguration") << preconfiguration_message;
      }
      
      if ( !stream_ps.empty() ) {
        LogWarning ("multiLogConfig")
        << "The message logger has been configured multiple times";
        clean_slate_configuration = false;              // Change Log 22
      }
      configure_ordinary_destinations();                // Change Log 16
      configure_statistics();                   // Change Log 16
      
      configure_external_dests();
      
    }  // ThreadSafeLogMessageLoggerScribe::configure_errorlog()
    
    
    
    
    void
    ThreadSafeLogMessageLoggerScribe::configure_dest( ELdestControl & dest_ctrl
                                                     , String const &  filename
                                                     )
    {
      static const int NO_VALUE_SET = -45654;           // change log 2
      vString  empty_vString;
      PSet     empty_PSet;
      String   empty_String;
      
      // Defaults:                          // change log 3a
      const std::string COMMON_DEFAULT_THRESHOLD = "INFO";
      const         int COMMON_DEFAULT_LIMIT     = NO_VALUE_SET;
      const         int COMMON_DEFAULT_INTERVAL  = NO_VALUE_SET;    // change log 6
      const         int COMMON_DEFAULT_TIMESPAN  = NO_VALUE_SET;
      
      char const*  severity_array[] = {"WARNING", "INFO", "ERROR", "DEBUG"};
      vString const  severities(severity_array+0, severity_array+4);
      
      // grab list of categories
      vString  categories
      = getAparameter<vString>(*job_pset_p, "categories", empty_vString);
      
      // grab list of messageIDs -- these are a synonym for categories
      // Note -- the use of messageIDs is deprecated in favor of categories
      {
        vString  messageIDs
        = getAparameter<vString>(*job_pset_p, "messageIDs", empty_vString);
        
        // combine the lists, not caring about possible duplicates (for now)
        copy_all( messageIDs, std::back_inserter(categories) );
      }  // no longer need messageIDs
      
      // grab list of hardwired categories (hardcats) -- these are to be added
      // to the list of categories -- change log 24
      {
        std::vector<std::string> hardcats = messageLoggerDefaults->categories;
        // combine the lists, not caring about possible duplicates (for now)
        copy_all( hardcats, std::back_inserter(categories) );
      }  // no longer need hardcats
      
      // grab default threshold common to all destinations
      String default_threshold
      = getAparameter<String>(*job_pset_p, "threshold", empty_String);
      // change log 3a
      // change log 24
      
      // grab default limit/interval/timespan common to all destinations/categories:
      PSet  default_pset
      = getAparameter<PSet>(*job_pset_p, "default", empty_PSet);
      int  default_limit
      = getAparameter<int>(default_pset, "limit", COMMON_DEFAULT_LIMIT);
      int  default_interval
      = getAparameter<int>(default_pset, "reportEvery", COMMON_DEFAULT_INTERVAL);
      // change log 6, 10
      int  default_timespan
      = getAparameter<int>(default_pset, "timespan", COMMON_DEFAULT_TIMESPAN);
      // change log 2a
      // change log 3a
      String default_pset_threshold
      = getAparameter<String>(default_pset, "threshold", default_threshold);
      // change log 34
      
      // grab all of this destination's parameters:
      PSet  dest_pset = getAparameter<PSet>(*job_pset_p, filename, empty_PSet);
      
      // See if this is just a placeholder          // change log 9
      bool is_placeholder
      = getAparameter<bool>(dest_pset, "placeholder", false);
      if (is_placeholder) return;
      
      // grab this destination's default limit/interval/timespan:
      PSet  dest_default_pset
      = getAparameter<PSet>(dest_pset, "default", empty_PSet);
      int  dest_default_limit
      = getAparameter<int>(dest_default_pset, "limit", default_limit);
      int  dest_default_interval
      = getAparameter<int>(dest_default_pset, "reportEvery", default_interval);
      // change log 6
      int  dest_default_timespan
      = getAparameter<int>(dest_default_pset, "timespan", default_timespan);
      // change log 1a
      if ( dest_default_limit != NO_VALUE_SET ) {
        if ( dest_default_limit < 0 ) dest_default_limit = 2000000000;
        dest_ctrl.setLimit("*", dest_default_limit );
      }                         // change log 1b, 2a, 2b
      if ( dest_default_interval != NO_VALUE_SET ) {  // change log 6
        dest_ctrl.setInterval("*", dest_default_interval );
      }
      if ( dest_default_timespan != NO_VALUE_SET ) {
        if ( dest_default_timespan < 0 ) dest_default_timespan = 2000000000;
        dest_ctrl.setTimespan("*", dest_default_timespan );
      }                         // change log 1b, 2a, 2b
      
      // establish this destination's threshold:
      String dest_threshold
      = getAparameter<String>(dest_pset, "threshold", default_threshold);
      if (dest_threshold == empty_String) {
        dest_threshold = default_threshold;
      }
      if (dest_threshold == empty_String) {         // change log 34
        dest_threshold = default_pset_threshold;
      }
      if (dest_threshold == empty_String) {
        dest_threshold = messageLoggerDefaults->threshold(filename);
      }
      if (dest_threshold == empty_String) dest_threshold = COMMON_DEFAULT_THRESHOLD;
      ELseverityLevel  threshold_sev(dest_threshold);
      dest_ctrl.setThreshold(threshold_sev);
      // change log 37
      if (threshold_sev <= ELseverityLevel::ELsev_success)
      { edm::MessageDrop::debugAlwaysSuppressed = false; }
      if (threshold_sev <= ELseverityLevel::ELsev_info)
      { edm::MessageDrop::infoAlwaysSuppressed = false; }
      if (threshold_sev <= ELseverityLevel::ELsev_warning)
      { edm::MessageDrop::warningAlwaysSuppressed = false; }
      
      // establish this destination's limit/interval/timespan for each category:
      for( vString::const_iterator id_it = categories.begin()
          ; id_it != categories.end()
          ; ++id_it
          )
      {
        String  msgID = *id_it;
        PSet default_category_pset
        = getAparameter<PSet>(default_pset, msgID, empty_PSet); // change log 5
        PSet  category_pset
        = getAparameter<PSet>(dest_pset, msgID, default_category_pset);
        
        int  category_default_limit
        = getAparameter<int>(default_category_pset, "limit", NO_VALUE_SET);
        int  limit
        = getAparameter<int>(category_pset, "limit", category_default_limit);
        if (limit == NO_VALUE_SET) limit = dest_default_limit;
        // change log 7
        int  category_default_interval
        = getAparameter<int>(default_category_pset, "reportEvery", NO_VALUE_SET);
        int  interval
        = getAparameter<int>(category_pset, "reportEvery",category_default_interval);
        if (interval == NO_VALUE_SET) interval = dest_default_interval;
        // change log 6  and then 7
        int  category_default_timespan
        = getAparameter<int>(default_category_pset, "timespan", NO_VALUE_SET);
        int  timespan
        = getAparameter<int>(category_pset, "timespan", category_default_timespan);
        if (timespan == NO_VALUE_SET) timespan = dest_default_timespan;
        // change log 7
        
        std::string category = msgID;
        if ( limit     == NO_VALUE_SET )  {             // change log 24
          limit = messageLoggerDefaults->limit(filename,category);
        }
        if ( interval     == NO_VALUE_SET )  {          // change log 24
          interval = messageLoggerDefaults->reportEvery(filename,category);
        }
        if ( timespan     == NO_VALUE_SET )  {          // change log 24
          timespan = messageLoggerDefaults->timespan(filename,category);
        }
        
        if( limit     != NO_VALUE_SET )  {
          if ( limit < 0 ) limit = 2000000000;
          dest_ctrl.setLimit(msgID, limit);
        }                       // change log 2a, 2b
        if( interval  != NO_VALUE_SET )  {
          dest_ctrl.setInterval(msgID, interval);
        }                       // change log 6
        if( timespan  != NO_VALUE_SET )  {
          if ( timespan < 0 ) timespan = 2000000000;
          dest_ctrl.setTimespan(msgID, timespan);
        }                       // change log 2a, 2b
        
      }  // for
      
      // establish this destination's limit for each severity:
      for( vString::const_iterator sev_it = severities.begin()
          ; sev_it != severities.end()
          ; ++sev_it
          )
      {
        String  sevID = *sev_it;
        ELseverityLevel  severity(sevID);
        PSet  default_sev_pset
        = getAparameter<PSet>(default_pset, sevID, empty_PSet);
        PSet  sev_pset
        = getAparameter<PSet>(dest_pset, sevID, default_sev_pset);
        // change log 5
        int  limit     = getAparameter<int>(sev_pset, "limit", NO_VALUE_SET);
        if ( limit     == NO_VALUE_SET )  {             // change log 24
          limit = messageLoggerDefaults->sev_limit(filename,sevID);
        }
        if( limit    != NO_VALUE_SET )  {
          if (limit < 0) limit = 2000000000;            // change log 38
          dest_ctrl.setLimit(severity, limit   );
        }
        int  interval  = getAparameter<int>(sev_pset, "reportEvery", NO_VALUE_SET);
        if ( interval     == NO_VALUE_SET )  {          // change log 24
          interval = messageLoggerDefaults->sev_reportEvery(filename,sevID);
        }
        if( interval != NO_VALUE_SET )  dest_ctrl.setInterval(severity, interval);
        // change log 2
        int  timespan  = getAparameter<int>(sev_pset, "timespan", NO_VALUE_SET);
        if ( timespan     == NO_VALUE_SET )  {          // change log 24
          timespan = messageLoggerDefaults->sev_timespan(filename,sevID);
        }
        if( timespan    != NO_VALUE_SET )  {
          if (timespan < 0) timespan = 2000000000;          // change log 38
          dest_ctrl.setTimespan(severity, timespan   );
        }
      }  // for
      
      // establish this destination's linebreak policy:
      bool noLineBreaks_default
      = getAparameter<bool> (default_pset, "noLineBreaks", false);
      // change log 5
      bool noLineBreaks
      = getAparameter<bool> (dest_pset, "noLineBreaks", noLineBreaks_default);
      if (noLineBreaks) {
        dest_ctrl.setLineLength(32000);
      }
      else {
        int  lenDef = 80;
        int  lineLen_default
        = getAparameter<int> (default_pset, "lineLength", lenDef);
        // change log 5
        int  lineLen = getAparameter<int> (dest_pset, "lineLength", lineLen_default);
        if (lineLen != lenDef) {
          dest_ctrl.setLineLength(lineLen);
        }
      }
      
      // if indicated, suppress time stamps in this destination's output
      bool suppressTime_default
      = getAparameter<bool> (default_pset, "noTimeStamps", false);
      bool suppressTime
      = getAparameter<bool> (dest_pset, "noTimeStamps", suppressTime_default);
      if (suppressTime) {
        dest_ctrl.suppressTime();
      }
      
    }  // ThreadSafeLogMessageLoggerScribe::configure_dest()
    
    void
    ThreadSafeLogMessageLoggerScribe::configure_ordinary_destinations() // Changelog 16
    {
      vString  empty_vString;
      String   empty_String;
      PSet     empty_PSet;
      
      // Initialize unversal suppression variables
      MessageDrop::debugAlwaysSuppressed=true;      // change log 37
      MessageDrop::infoAlwaysSuppressed=true;       // change log 37
      MessageDrop::warningAlwaysSuppressed=true;        // change log 37
      
      // grab list of destinations:
      vString  destinations
      = getAparameter<vString>(*job_pset_p, "destinations", empty_vString);
      
      // Use the default list of destinations if and only if the grabbed list is
      // empty                          // change log 24
      if (destinations.empty()) {
        destinations = messageLoggerDefaults->destinations;
      }
      
      // dial down the early destination if other dest's are supplied:
      if( ! destinations.empty() )
        early_dest.setThreshold(ELhighestSeverity);
      
      // establish each destination:
      for( vString::const_iterator it = destinations.begin()
          ; it != destinations.end()
          ; ++it
          )
      {
        String filename = *it;
        String psetname = filename;
        
        // check that this destination is not just a placeholder // change log 11
        PSet  dest_pset = getAparameter<PSet>(*job_pset_p, psetname, empty_PSet);
        bool is_placeholder
        = getAparameter<bool>(dest_pset, "placeholder", false);
        if (is_placeholder) continue;
        
        // Modify the file name if extension or name is explicitly specified
        // change log 14
        
        // Although for an ordinary destination there is no output attribute
        // for the cfg (you can use filename instead) we provide output() for
        // uniformity with the statistics destinations.  The "right way" to
        // work this would have been to provide a filename() method, along with
        // an extension() method.  We recognize the potential name confusion here
        // (filename(filename))!
        
        // Determine the destination file name to use if no explicit filename is
        // supplied in the cfg.
        String filename_default
        = getAparameter<String>(dest_pset, "output", empty_String);
        if ( filename_default == empty_String ) {
          filename_default = messageLoggerDefaults->output(psetname); // change log 31
          if (filename_default  == empty_String) {
            filename_default  = filename;
          }
        }
        
        String explicit_filename
        = getAparameter<String>(dest_pset, "filename", filename_default);
        if (explicit_filename != empty_String) filename = explicit_filename;
        String explicit_extension
        = getAparameter<String>(dest_pset, "extension", empty_String);
        if (explicit_extension != empty_String) {
          if (explicit_extension[0] == '.') {
            filename += explicit_extension;
          } else {
            filename = filename + "." + explicit_extension;
          }
        }
        
        // Attach a default extension of .log if there is no extension on a file
        // change log 18 - this had been done in concert with attaching destination
        
        std::string actual_filename = filename;         // change log 4
        if ( (filename != "cout") && (filename != "cerr") )  {
          const std::string::size_type npos = std::string::npos;
          if ( filename.find('.') == npos ) {
            actual_filename += ".log";
          }
        }
        
        // Check that this is not a duplicate name          // change log 18
        if ( stream_ps.find(actual_filename)!=stream_ps.end() ) {
          if (clean_slate_configuration) {              // change log 22
                                                  //        throw edm::Exception ( edm::errors::Configuration )
            LogError("duplicateDestination")            // change log 35
            <<"Duplicate name for a MessageLogger Destination: "
            << actual_filename
            << "\n" << "Only the first configuration instructions are used";
            continue;
          } else {
            LogWarning("duplicateDestination")
            <<"Duplicate name for a MessageLogger Destination: "
            << actual_filename
            << "\n" << "Only original configuration instructions are used";
            continue;
          }
        }
        
        ordinary_destination_filenames.push_back(actual_filename);
        
        // attach the current destination, keeping a control handle to it:
        ELdestControl dest_ctrl;
        if( actual_filename == "cout" )  {
          dest_ctrl = admin_p->attach( ELoutput(std::cout) );
          stream_ps["cout"] = &std::cout;
        }
        else if( actual_filename == "cerr" )  {
          early_dest.setThreshold(ELzeroSeverity);
          dest_ctrl = early_dest;
          stream_ps["cerr"] = &std::cerr;
        }
        else  {
          auto os_sp = std::make_shared<std::ofstream>(actual_filename.c_str());
          file_ps.push_back(os_sp);
          dest_ctrl = admin_p->attach( ELoutput(*os_sp) );
          stream_ps[actual_filename] = os_sp.get();
        }
        
        // now configure this destination:
        configure_dest(dest_ctrl, psetname);
        
      }  // for [it = destinations.begin() to end()]
      
    } // configure_ordinary_destinations
    
    
    void
    ThreadSafeLogMessageLoggerScribe::configure_statistics()
    {
      vString  empty_vString;
      String   empty_String;
      PSet     empty_PSet;
      
      // grab list of statistics destinations:
      vString  statistics
      = getAparameter<vString>(*job_pset_p, "statistics", empty_vString);
      
      bool no_statistics_configured = statistics.empty();       // change log 24
      
      if ( no_statistics_configured ) {
        // Read the list of staistics destinations from hardwired defaults,
        // but only if there is also no list of ordinary destinations.
        // (If a cfg specifies destinations, and no statistics, assume that
        // is what the user wants.)
        vString  destinations
        = getAparameter<vString>(*job_pset_p, "destinations", empty_vString);
        if (destinations.empty()) {
          statistics = messageLoggerDefaults->statistics;
          no_statistics_configured = statistics.empty();
        }
      }
      
      // establish each statistics destination:
      for( vString::const_iterator it = statistics.begin()
          ; it != statistics.end()
          ; ++it
          )
      {
        String statname = *it;
        String psetname = statname;
        
        // check that this destination is not just a placeholder // change log 20
        PSet  stat_pset = getAparameter<PSet>(*job_pset_p, psetname, empty_PSet);
        bool is_placeholder
        = getAparameter<bool>(stat_pset, "placeholder", false);
        if (is_placeholder) continue;
        
        // Determine the destination file name
        String filename
        = getAparameter<String>(stat_pset, "output", empty_String);
        if ( filename == empty_String ) {
          filename = messageLoggerDefaults->output(psetname);   // change log 31
          if (filename == empty_String) {
            filename = statname;
          }
        }
        
        // Modify the file name if extension or name is explicitly specified
        // change log 14 -- probably suspenders and a belt, because ouput option
        // is present, but uniformity is nice.
        
        String explicit_filename
        = getAparameter<String>(stat_pset, "filename", filename);
        if (explicit_filename != empty_String) filename = explicit_filename;
        String explicit_extension
        = getAparameter<String>(stat_pset, "extension", empty_String);
        if (explicit_extension != empty_String) {
          if (explicit_extension[0] == '.') {
            filename += explicit_extension;
          } else {
            filename = filename + "." + explicit_extension;
          }
        }
        
        // Attach a default extension of .log if there is no extension on a file
        // change log 18 - this had been done in concert with attaching destination
        
        std::string actual_filename = filename;         // change log 4
        if ( (filename != "cout") && (filename != "cerr") )  {  // change log 23
          const std::string::size_type npos = std::string::npos;
          if ( filename.find('.') == npos ) {
            actual_filename += ".log";
          }
        }
        
        // Check that this is not a duplicate name -
        // unless it is an ordinary destination (which stats can share)
        if ( !search_all(ordinary_destination_filenames, actual_filename) ) {
          if ( stream_ps.find(actual_filename)!=stream_ps.end() ) {
            if (clean_slate_configuration) {            // change log 22
              throw edm::Exception ( edm::errors::Configuration )
              <<"Duplicate name for a MessageLogger Statistics Destination: "
              << actual_filename
              << "\n";
            } else {
              LogWarning("duplicateDestination")
              <<"Duplicate name for a MessageLogger Statistics Destination: "
              << actual_filename
              << "\n" << "Only original configuration instructions are used";
              continue;
            }
          }
        }
        
        // create (if statistics file does not match any destination file name)
        // or note (if statistics file matches a destination file name) the ostream.
        // But if no statistics destinations were provided in the config, do not
        // create a new destination for this hardwired statistics - only act if
        // it is matches a destination.  (shange log 24)
        bool statistics_destination_is_real = !no_statistics_configured;
        std::ostream* os_p;
        if ( stream_ps.find(actual_filename) == stream_ps.end() ) {
          if ( actual_filename == "cout" ) {
            os_p = &std::cout;
          } else if ( actual_filename == "cerr" ) {
            os_p = &std::cerr;
          } else {
            auto os_sp = std::make_shared<std::ofstream>(actual_filename.c_str());
            file_ps.push_back(os_sp);
            os_p = os_sp.get();
          }
          stream_ps[actual_filename] = os_p;
        } else {
          statistics_destination_is_real = true;            // change log 24
          os_p = stream_ps[actual_filename];
        }
        
        if (statistics_destination_is_real) {           // change log 24
                                                  // attach the statistics destination, keeping a control handle to it:
          ELdestControl dest_ctrl;
          dest_ctrl = admin_p->attach( ELstatistics(*os_p) );
          statisticsDestControls.push_back(dest_ctrl);
          bool reset = getAparameter<bool>(stat_pset, "reset", false);
          statisticsResets.push_back(reset);
          
          // now configure this destination:
          configure_dest(dest_ctrl, psetname);
          
          // and suppress the desire to do an extra termination summary just because
          // of end-of-job info messages
          dest_ctrl.noTerminationSummary();
        }
        
      }  // for [it = statistics.begin() to end()]
      
    } // configure_statistics
    
    void
    ThreadSafeLogMessageLoggerScribe::configure_external_dests()
    {
      if( ! job_pset_p )
      {
        //  extern_dests.clear();
        //  change log 12, removed by change log 13
        return;
      }
      
      for( auto& dest : extern_dests)
      {
        ELdestination *  dest_p = dest->dest_p().get();
        ELdestControl  dest_ctrl = admin_p->attach( *dest_p );
        
        // configure the newly-attached destination:
        configure_dest( dest_ctrl, dest->name() );
        delete dest;  // dispose of our (copy of the) NamedDestination
      }
      extern_dests.clear();
      
    }  // ThreadSafeLogMessageLoggerScribe::configure_external_dests
    
    void
    ThreadSafeLogMessageLoggerScribe::parseCategories (std::string const & s,
                                                       std::vector<std::string> & cats)
    {
      const std::string::size_type npos = std::string::npos;
      std::string::size_type i    = 0;
      while ( i != npos ) {
        std::string::size_type j = s.find('|',i);
        cats.push_back (s.substr(i,j-i));
        i = j;
        while ( (i != npos) && (s[i] == '|') ) ++i;
        // the above handles cases of || and also | at end of string
      }
      // Note:  This algorithm assigns, as desired, one null category if it
      //        encounters an empty categories string
    }
    
    void
    ThreadSafeLogMessageLoggerScribe::triggerStatisticsSummaries() {
      assert (statisticsDestControls.size() == statisticsResets.size());
      for (unsigned int i = 0; i != statisticsDestControls.size(); ++i) {
        statisticsDestControls[i].summary( );
        if (statisticsResets[i]) statisticsDestControls[i].wipe( );
      }
    }
    
    void
    ThreadSafeLogMessageLoggerScribe::
    triggerFJRmessageSummary(std::map<std::string, double> & sm)  // ChangeLog 29
    {
      if (statisticsDestControls.empty()) {
        sm["NoStatisticsDestinationsConfigured"] = 0.0;
      } else {
        statisticsDestControls[0].summaryForJobReport(sm);
      }
    }
    
    
    
  } // end of namespace service
} // end of namespace edm