SiStripTemplateSplit.cc

Go to the documentation of this file.

//
//  SiStripTemplateSplit.cc
//
//  Procedure to fit two templates (same angle hypotheses) to a single cluster
//
//  Version 1.00 [based on SiPixelTemplateSplit.cc Version 2.30]
//  Version 1.01 [improve error estimation for qbin=3 events]
//  Version 1.05 [Incorporate VI-like speed improvements]
//  Version 1.06 Clean-up irrelevant (since truncation) sorting
//  Version 2.10 Clone speed improvements from the pixels (eliminate 3-d multi-arays, improve seach algorithm)
//
//  Created by Morris Swartz on 04/10/08.
//
//

#ifndef SI_PIXEL_TEMPLATE_STANDALONE
//#include <cmath.h>
#else
#include <math.h>
#endif
#include <algorithm>
#include <vector>
#include <list>
#include <iostream>
// ROOT::Math has a c++ function that does the probability calc, but only in v5.12 and later
#include "Math/DistFunc.h"
#include "TMath.h"
// Use current version of gsl instead of ROOT::Math
//#include <gsl/gsl_cdf.h>

#ifndef SI_PIXEL_TEMPLATE_STANDALONE
#include "RecoLocalTracker/SiStripRecHitConverter/interface/SiStripTemplateSplit.h"
#include "RecoLocalTracker/SiStripRecHitConverter/interface/VVIObj.h"
#include "FWCore/MessageLogger/interface/MessageLogger.h"
#define LOGERROR(x) edm::LogError(x)
#define LOGDEBUG(x) LogDebug(x)
constexpr int theVerboseLevel = 2;
#define ENDL " "
#else
#include "SiStripTemplateSplit.h"
#include "VVIObj.h"
//#include "SiStripTemplate2D.h"
//#include "SimpleTemplate2D.h"
//static int theVerboseLevel = {2};
#define LOGERROR(x) std::cout << x << ": "
#define LOGDEBUG(x) std::cout << x << ": "
#define ENDL std::endl
#endif

using namespace SiStripTemplateSplit;

// *************************************************************************************************************************************
// *************************************************************************************************************************************
int SiStripTemplateSplit::StripTempSplit(int id, float cotalpha, float cotbeta, float locBy, int speed, std::vector<float>& cluster, 
            SiStripTemplate& templ, 
            float& xrec1, float& xrec2, float& sigmax, float& prob2x, int& q2bin, float& prob2Q)
            
{
    // Local variables 
    int i, j, k, binq, binqerr, midpix;
    int fxpix, nxpix, lxpix, logxpx, shiftx;
    int nclusx;
    int nxbin, xcbin, minbinj, minbink;
    int deltaj, jmin, jmax, kmin, kmax, km, fxbin, lxbin, djx;
    float sxthr, delta, sigma, pseudopix, xsize, qscale;
    float ss2, ssa, sa2, rat, fq, qtotal, qavg;
    float originx, bias, maxpix;
    double chi2x, meanx, chi2xmin, chi21max;
    double hchi2, hndof;
    double prvav, mpv, sigmaQ, kappa, xvav, beta2;
    float xsum[BSXSIZE];
    float xsig2[BSXSIZE];
    float xw2[BSXSIZE], xsw[BSXSIZE];
    const float sqrt2x={2.00000};
    const float sqrt12={3.4641};
    const float probmin={1.110223e-16};
    const float prob2Qmin={1.e-5};
    
//  bool SiStripTemplateSplit::SimpleTemplate2D(float cotalpha, float cotbeta, float xhit, float yhit, float thick, float lorxwidth, float lorywidth, 
//                        float qavg, std::vector<bool> ydouble, std::vector<bool> xdouble, float template2d[BSXM2][BYM2]);
    
// The minimum chi2 for a valid one pixel cluster = pseudopixel contribution only

    const double mean1pix={0.100}, chi21min={0.160};
              
// First, interpolate the template needed to analyze this cluster     
// check to see of the track direction is in the physical range of the loaded template

    if(!templ.interpolate(id, cotalpha, cotbeta, locBy)) {
       LOGDEBUG("SiStripTemplateReco") << "input cluster direction cot(alpha) = " << cotalpha << ", cot(beta) = " << cotbeta 
       << " is not within the acceptance of template ID = " << id << ", no reconstruction performed" << ENDL;   
       return 20;
    }
              
    // Get pixel dimensions from the template (to allow multiple detectors in the future)
    
    xsize = templ.xsize();
   
    // Define size of pseudopixel
    
    pseudopix = templ.s50();
    
    // Get charge scaling factor
    
    qscale = templ.qscale();
    
    // enforce maximum size 
    
    nclusx = (int)cluster.size();
    
    if(nclusx > TSXSIZE) {nclusx = TSXSIZE;}
    
    // First, rescale all strip charges, sum them and trunate the strip charges      
    
    qtotal = 0.f;
    for(i=0; i<BSXSIZE; ++i) {xsum[i] = 0.f;}
    maxpix = 2.f*templ.sxmax();
    for(j=0; j<nclusx; ++j) {
        xsum[j] = qscale*cluster[j];
        qtotal += xsum[j];
       if(xsum[j] > maxpix) {xsum[j] = maxpix;}
   }
    
    // next, identify the x-cluster ends, count total pixels, nxpix, and logical pixels, logxpx   
    
    fxpix = -1;
    nxpix=0;
    lxpix=0;
    logxpx=0;
    for(i=0; i<BSXSIZE; ++i) {
       if(xsum[i] > 0.f) {
          if(fxpix == -1) {fxpix = i;}
            ++logxpx;
            ++nxpix;
            lxpix = i;
        }
    }
    
    
    //  dlengthx = (float)nxpix - templ.clslenx();
    
    // Make sure cluster is continuous
    
    if((lxpix-fxpix+1) != nxpix) { 
        
       LOGDEBUG("SiStripTemplateReco") << "x-length of pixel cluster doesn't agree with number of pixels above threshold" << ENDL;
       if (theVerboseLevel > 2) {
            LOGDEBUG("SiStripTemplateReco") << "xsum[] = ";
            for(i=0; i<BSXSIZE-1; ++i) {LOGDEBUG("SiStripTemplateReco") << xsum[i] << ", ";}           
            LOGDEBUG("SiStripTemplateReco") << ENDL;
        }
        
       return 2; 
    }
    
    // If cluster is longer than max template size, technique fails
    
    if(nxpix > TSXSIZE) { 
        
       LOGDEBUG("SiStripTemplateReco") << "x-length of pixel cluster is larger than maximum template size" << ENDL;
       if (theVerboseLevel > 2) {
            LOGDEBUG("SiStripTemplateReco") << "xsum[] = ";
            for(i=0; i<BSXSIZE-1; ++i) {LOGDEBUG("SiStripTemplateReco") << xsum[i] << ", ";}           
            LOGDEBUG("SiStripTemplateReco") << ENDL;
        }
        
       return 7; 
    }
    
    // next, center the cluster on template center if necessary   
    
    midpix = (fxpix+lxpix)/2;
    shiftx = templ.cxtemp() - midpix;
    if(shiftx > 0) {
       for(i=lxpix; i>=fxpix; --i) {
           xsum[i+shiftx] = xsum[i];
           xsum[i] = 0.f;
       }
    } else if (shiftx < 0) {
       for(i=fxpix; i<=lxpix; ++i) {
          xsum[i+shiftx] = xsum[i];
           xsum[i] = 0.f;
       }
    }
    lxpix +=shiftx;
    fxpix +=shiftx;
    
    // If the cluster boundaries are OK, add pesudopixels, otherwise quit
    
    if(fxpix > 1 && fxpix <BSXM2) {
       xsum[fxpix-1] = pseudopix;
       xsum[fxpix-2] = 0.2f*pseudopix;
    } else {return 9;}
    if(lxpix > 1 && lxpix < BSXM2) {
       xsum[lxpix+1] = pseudopix;
       xsum[lxpix+2] = 0.2f*pseudopix;
    } else {return 9;}
    
    // finally, determine if pixel[0] is a double pixel and make an origin correction if it is   
    
    originx = 0.f;
            
// uncertainty and final corrections depend upon total charge bin      
       
    qavg = templ.qavg();
    fq = qtotal/qavg;
    if(fq > 3.0f) {
       binq=0;
    } else {
       if(fq > 2.0f) {
          binq=1;
       } else {
          if(fq > 1.70f) {
             binq=2;
          } else {
             binq=3;
          }
       }
    }
    
    // Return the charge bin via the parameter list unless the charge is too small (then flag it)
    
    q2bin = binq;
    if(qtotal < 1.9f*templ.qmin()) {q2bin = 5;} else {
        if(qtotal < 1.9f*templ.qmin(1)) {q2bin = 4;}
    }
    if (theVerboseLevel > 9) {
        LOGDEBUG("SiStripTemplateReco") <<
        "ID = " << id <<  
        " cot(alpha) = " << cotalpha << " cot(beta) = " << cotbeta << 
        " nclusx = " << nclusx << ENDL;
    }
    
// binqerr is the charge bin for error estimation
    
    binqerr = binq;
    if(binqerr > 2) binqerr = 2;    
        
// Calculate the Vavilov probability that the cluster charge is consistent with a merged cluster
        
    if(speed < 0) {
       templ.vavilov2_pars(mpv, sigmaQ, kappa);
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
       if((sigmaQ <=0.) || (mpv <= 0.) || (kappa < 0.01) || (kappa > 9.9)) {
            throw cms::Exception("DataCorrupt") << "SiStripTemplateSplit::Vavilov parameters mpv/sigmaQ/kappa = " << mpv << "/" << sigmaQ << "/" << kappa << std::endl;
       }
#else
       assert((sigmaQ > 0.) && (mpv > 0.) && (kappa > 0.01) && (kappa < 10.));
#endif
       xvav = ((double)qtotal-mpv)/sigmaQ;
       beta2 = 1.;
//  VVIObj is a private port of CERNLIB VVIDIS
       sistripvvi::VVIObj vvidist(kappa, beta2, 1);
       prvav = vvidist.fcn(xvav);           
       prob2Q = 1. - prvav;
       if(prob2Q < prob2Qmin) {prob2Q = prob2Qmin;}
    } else {
        prob2Q = -1.f;
    }
    
    
// Next, generate the 3d x-template
   
    templ.xtemp3d_int(nxpix, nxbin);
    
// retrieve the number of x-bins 
    
    xcbin = nxbin/2;
    
// Next, decide on chi^2 min search parameters
    
#ifndef SI_PIXEL_TEMPLATE_STANDALONE
    if(speed < -1 || speed > 2) {
        throw cms::Exception("DataCorrupt") << "SiStripTemplateReco::PixelTempReco2D called with illegal speed = " << speed << std::endl;
    }
#else
    assert(speed >= -1 && speed < 3);
#endif
    fxbin = 0; lxbin = nxbin-1; djx = 1;
    if(speed > 0) {
        djx = 2;
        if(speed > 1) {djx = 4;}
    }
                              
// Define the maximum signal to allow before de-weighting a pixel 

    sxthr = 1.1f*maxpix;
                   
// Evaluate pixel-by-pixel uncertainties (weights) for the templ analysis 

//  for(i=0; i<BYSIZE; ++i) { xsig2[i] = 0.; }
    templ.xsigma2(fxpix, lxpix, sxthr, xsum, xsig2);
              
// Find the template bin that minimizes the Chi^2 

    chi2xmin = 1.e15;
    ss2 = 0.f;
    for(i=fxpix-2; i<=lxpix+2; ++i) {
        xw2[i] = 1.f/xsig2[i];
        xsw[i] = xsum[i]*xw2[i];
        ss2 += xsum[i]*xsw[i];
    }
    minbinj = -1; 
    minbink = -1;
    deltaj = djx;
    jmin = fxbin;
    jmax = lxbin;
    kmin = fxbin;
    kmax = lxbin;
    std::vector<float> xtemp(BSXSIZE);
    while(deltaj > 0) {
        for(j=jmin; j<jmax; j+=deltaj) {
            km = std::min(kmax, j);
            for(k=kmin; k<=km; k+=deltaj) {
                
                // Get the template for this set of indices
                
                templ.xtemp3d(j, k, xtemp);
                
                ssa = 0.f;
                sa2 = 0.f;
                for(i=fxpix-2; i<=lxpix+2; ++i) {
                    ssa += xsw[i]*xtemp[i];
                    sa2 += xtemp[i]*xtemp[i]*xw2[i];
                }
                rat=ssa/ss2;
                if(rat <= 0.f) {LOGERROR("SiStripTemplateSplit") << "illegal chi2xmin normalization = " << rat << ENDL; rat = 1.;}
                chi2x=ss2-2.f*ssa/rat+sa2/(rat*rat);
                if(chi2x < chi2xmin) {
                    chi2xmin = chi2x;
                    minbinj = j;
                    minbink = k;
                }
            }
        } 
        deltaj /= 2;
        if(minbinj > fxbin) {jmin = minbinj - deltaj;} else {jmin = fxbin;}
        if(minbinj < lxbin) {jmax = minbinj + deltaj;} else {jmax = lxbin;}
        if(minbink > fxbin) {kmin = minbink - deltaj;} else {kmin = fxbin;}
        if(minbink < lxbin) {kmax = minbink + deltaj;} else {kmax = lxbin;}     
    }
    
    if (theVerboseLevel > 9) {
        LOGDEBUG("SiStripTemplateReco") <<
        "minbinj/minbink " << minbinj<< "/" << minbink << " chi2xmin = " << chi2xmin << ENDL;
    }

// Do not apply final template pass to 1-pixel clusters (use calibrated offset)
    
    if(logxpx == 1) {
    
        delta = templ.dxone();
        sigma = templ.sxone();
        xrec1 = 0.5f*(fxpix+lxpix-2*shiftx+2.f*originx)*xsize-delta;
       xrec2 = xrec1;
       if(sigma <= 0.f) {
          sigmax = xsize/sqrt12;
       } else {
          sigmax = sigma;
       }
       
// Do probability calculation for one-pixel clusters

        chi21max = fmax(chi21min, (double)templ.chi2xminone());
        chi2xmin -=chi21max;
        if(chi2xmin < 0.) {chi2xmin = 0.;}
        meanx = fmax(mean1pix, (double)templ.chi2xavgone());
        hchi2 = chi2xmin/2.; hndof = meanx/2.;
        prob2x = 1. - TMath::Gamma(hndof, hchi2);
       
    } else {
       
            
// uncertainty and final correction depend upon charge bin     
       
        bias = templ.xavgc2m(binq);
        xrec1 = (0.125f*(minbink-xcbin)+BSHX-(float)shiftx+originx)*xsize - bias;
        xrec2 = (0.125f*(minbinj-xcbin)+BSHX-(float)shiftx+originx)*xsize - bias;
        sigmax = sqrt2x*templ.xrmsc2m(binqerr);
            
       
// Do goodness of fit test in y  
       
       if(chi2xmin < 0.0) {chi2xmin = 0.0;}
       meanx = templ.chi2xavgc2m(binq);
       if(meanx < 0.01) {meanx = 0.01;}
       hchi2 = chi2xmin/2.; hndof = meanx/2.;
       prob2x = 1. - TMath::Gamma(hndof, hchi2);
   }
    
    //  Don't return exact zeros for the probability
    
    if(prob2x < probmin) {prob2x = probmin;}
    
    
    return 0;
} // StripTempSplit 


// *************************************************************************************************************************************
// *************************************************************************************************************************************
int SiStripTemplateSplit::StripTempSplit(int id, float cotalpha, float cotbeta, float locBy, std::vector<float>& cluster, 
                                         SiStripTemplate& templ, 
                                         float& xrec1, float& xrec2, float& sigmax, float& prob2x, int& q2bin, float& prob2Q)

{
    // Local variables 
    const int speed = 1;

    return SiStripTemplateSplit::StripTempSplit(id, cotalpha, cotbeta, locBy, speed, cluster, templ, xrec1, xrec2, sigmax, prob2x, q2bin, prob2Q);
} // StripTempSplit