#include <TopSingleLeptonDQM_miniAOD.h>

Public Types
enum	Level { STANDARD, VERBOSE, DEBUG }
	different verbosity levels More...

Public Member Functions
void	book (DQMStore::IBooker &ibooker)
	book histograms in subdirectory directory More...

void	fill (const edm::Event &event, const edm::EventSetup &setup)
	fill monitor histograms with electronId and jetCorrections More...

	MonitorEnsemble (const char *label, const edm::ParameterSet &cfg, edm::ConsumesCollector &&iC)
	default contructor More...

	~MonitorEnsemble ()
	default destructor More...

Private Member Functions
bool	booked (const std::string histName) const
	check if histogram was booked More...

void	fill (const edm::Event &event, const edm::TriggerResults &triggerTable, std::string channel, const std::vector< std::string > labels) const
	fill trigger monitoring histograms More...

void	fill (const std::string histName, double value) const
	fill histogram if it had been booked before More...

void	fill (const std::string histName, double xValue, double yValue) const
	fill histogram if it had been booked before (2-dim version) More...

void	fill (const std::string histName, double xValue, double yValue, double zValue) const
	fill histogram if it had been booked before (2-dim version) More...

std::string	monitorPath (const std::string &label) const

std::string	selectionPath (const std::string &label) const

void	triggerBinLabels (std::string channel, const std::vector< std::string > labels)
	set configurable labels for trigger monitoring histograms More...

Private Attributes
edm::EDGetTokenT< reco::JetTagCollection >	btagCSV_

double	btagCSVWP_

edm::EDGetTokenT< reco::JetTagCollection >	btagEff_
	btag discriminator labels More...

double	btagEffWP_
	btag working points More...

edm::EDGetTokenT< reco::JetTagCollection >	btagPur_

double	btagPurWP_

edm::EDGetTokenT< reco::JetTagCollection >	btagVtx_

double	btagVtxWP_

std::string	directory_

double	eidCutValue_

std::unique_ptr< StringCutObjectSelector< pat::Electron > >	elecIso_
	extra isolation criterion on electron More...

edm::EDGetTokenT< edm::View< pat::Electron > >	elecs_

std::unique_ptr< StringCutObjectSelector< pat::Electron > >	elecSelect_
	extra selection on electrons More...

edm::EDGetTokenT< edm::ValueMap< float > >	electronId_
	electronId label More...

std::map< std::string, MonitorElement * >	hists_
	histogram container More...

bool	includeBTag_

std::string	jetCorrector_
	jetCorrector More...

edm::EDGetTokenT< reco::JetIDValueMap >	jetIDLabel_
	jetID as an extra selection type More...

std::unique_ptr< StringCutObjectSelector< reco::JetID > >	jetIDSelect_
	extra jetID selection on calo jets More...

edm::EDGetTokenT< edm::View< pat::Jet > >	jets_
	input sources for monitoring More...

std::unique_ptr< StringCutObjectSelector< pat::Jet > >	jetSelect

std::string	jetSelect_

std::string	label_
	instance label More...

int	logged_
	number of logged interesting events More...

double	lowerEdge_
	mass window upper and lower edge More...

std::vector< edm::EDGetTokenT< edm::View< pat::MET > > >	mets_
	considers a vector of METs More...

std::unique_ptr< StringCutObjectSelector< pat::Muon > >	muonIso_
	extra isolation criterion on muon More...

edm::EDGetTokenT< edm::View< pat::Muon > >	muons_

std::unique_ptr< StringCutObjectSelector< pat::Muon > >	muonSelect_
	extra selection on muons More...

edm::EDGetTokenT< edm::View< reco::Vertex > >	pvs_

std::unique_ptr< StringCutObjectSelector< reco::Vertex > >	pvSelect_

edm::EDConsumerBase	tmpConsumerBase

std::vector< std::string >	triggerPaths_

edm::EDGetTokenT< edm::TriggerResults >	triggerTable_
	trigger table More...

double	upperEdge_

Level	verbosity_
	verbosity level for booking More...

Detailed Description

Definition at line 32 of file TopSingleLeptonDQM_miniAOD.h.

Member Enumeration Documentation

enum TopSingleLepton_miniAOD::MonitorEnsemble::Level

different verbosity levels

Enumerator
STANDARD
VERBOSE
DEBUG

Definition at line 35 of file TopSingleLeptonDQM_miniAOD.h.

              {
     STANDARD,
     VERBOSE,
     DEBUG
   };

Constructor & Destructor Documentation

MonitorEnsemble::MonitorEnsemble	(	const char *	label,
		const edm::ParameterSet &	cfg,
		edm::ConsumesCollector &&	iC
	)

default contructor

Definition at line 26 of file TopSingleLeptonDQM_miniAOD.cc.

References DEBUG, directory_, eidCutValue_, elecIso_, elecs_, elecSelect_, electronId_, edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), jetCorrector_, jetIDLabel_, jetIDSelect_, jets_, jetSelect, jetSelect_, lowerEdge_, mets_, TtFullHadSignalSelMVATrainTreeSaver_cff::monitoring, muonIso_, muons_, muonSelect_, pvs_, pvSelect_, STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, GlobalPosition_Frontier_DevDB_cff::tag, triggerPaths_, triggerTable_, upperEdge_, VERBOSE, and verbosity_.

     : label_(label),
       elecIso_(nullptr),
       elecSelect_(nullptr),
       pvSelect_(nullptr),
       muonIso_(nullptr),
       muonSelect_(nullptr),
       jetIDSelect_(nullptr),
      jetSelect(nullptr),
       includeBTag_(false),
       lowerEdge_(-1.),
       upperEdge_(-1.),
       logged_(0) {
 
   // sources have to be given; this PSet is not optional
   edm::ParameterSet sources = cfg.getParameter<edm::ParameterSet>("sources");
  // muons_ = iC.consumes<edm::View<reco::PFCandidate> >(
  //     sources.getParameter<edm::InputTag>("muons"));
 
 
   muons_ = iC.consumes<edm::View<pat::Muon> >(
     sources.getParameter<edm::InputTag>("muons"));
 
 
   elecs_ = iC.consumes<edm::View<pat::Electron> >(
       sources.getParameter<edm::InputTag>("elecs"));
   pvs_ = iC.consumes<edm::View<reco::Vertex> >(
       sources.getParameter<edm::InputTag>("pvs"));
   jets_ = iC.consumes<edm::View<pat::Jet> >(
       sources.getParameter<edm::InputTag>("jets"));
   for (edm::InputTag const& tag :
        sources.getParameter<std::vector<edm::InputTag> >("mets"))
     mets_.push_back(iC.consumes<edm::View<pat::MET> >(tag));
   // electronExtras are optional; they may be omitted or
   // empty
   if (cfg.existsAs<edm::ParameterSet>("elecExtras")) {
 
 
     edm::ParameterSet elecExtras =
         cfg.getParameter<edm::ParameterSet>("elecExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (elecExtras.existsAs<std::string>("select")) {
       elecSelect_.reset( new StringCutObjectSelector<pat::Electron>(
           elecExtras.getParameter<std::string>("select")));
     }
     // isolation is optional; in case it's not found no
     // isolation will be applied
     if (elecExtras.existsAs<std::string>("isolation")) {
       elecIso_.reset( new StringCutObjectSelector<pat::Electron>(
           elecExtras.getParameter<std::string>("isolation")));
     }
     // electronId is optional; in case it's not found the
     // InputTag will remain empty
     if (elecExtras.existsAs<edm::ParameterSet>("electronId")) {
       edm::ParameterSet elecId =
           elecExtras.getParameter<edm::ParameterSet>("electronId");
       electronId_ = iC.consumes<edm::ValueMap<float> >(
           elecId.getParameter<edm::InputTag>("src"));
       eidCutValue_ = elecId.getParameter<double>("cutValue");
     }
   }
   // pvExtras are opetional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("pvExtras")) {
     edm::ParameterSet pvExtras =
         cfg.getParameter<edm::ParameterSet>("pvExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (pvExtras.existsAs<std::string>("select")) {
       pvSelect_.reset(new StringCutObjectSelector<reco::Vertex>(
           pvExtras.getParameter<std::string>("select")));
     }
   }
   // muonExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("muonExtras")) {
     edm::ParameterSet muonExtras =
         cfg.getParameter<edm::ParameterSet>("muonExtras");
     // select is optional; in case it's not found no
     // selection will be applied
     if (muonExtras.existsAs<std::string>("select")) {
       muonSelect_.reset(new StringCutObjectSelector<pat::Muon>(
           muonExtras.getParameter<std::string>("select")));
     }
     // isolation is optional; in case it's not found no
     // isolation will be applied
     if (muonExtras.existsAs<std::string>("isolation")) {
       muonIso_.reset(new StringCutObjectSelector<pat::Muon>(
           muonExtras.getParameter<std::string>("isolation")));
     }
   }
 
   // jetExtras are optional; they may be omitted or
   // empty
   if (cfg.existsAs<edm::ParameterSet>("jetExtras")) {
     edm::ParameterSet jetExtras =
         cfg.getParameter<edm::ParameterSet>("jetExtras");
     // jetCorrector is optional; in case it's not found
     // the InputTag will remain empty
     if (jetExtras.existsAs<std::string>("jetCorrector")) {
       jetCorrector_ = jetExtras.getParameter<std::string>("jetCorrector");
     }
     // read jetID information if it exists
     if (jetExtras.existsAs<edm::ParameterSet>("jetID")) {
       edm::ParameterSet jetID =
           jetExtras.getParameter<edm::ParameterSet>("jetID");
       jetIDLabel_ = iC.consumes<reco::JetIDValueMap>(
           jetID.getParameter<edm::InputTag>("label"));
       jetIDSelect_.reset(new StringCutObjectSelector<reco::JetID>(
           jetID.getParameter<std::string>("select")));
     }
     // select is optional; in case it's not found no
     // selection will be applied (only implemented for
     // CaloJets at the moment)
     if (jetExtras.existsAs<std::string>("select")) {
       jetSelect_ = jetExtras.getParameter<std::string>("select");
       jetSelect.reset(new StringCutObjectSelector<pat::Jet> (jetSelect_));
     }
   }
 
   // triggerExtras are optional; they may be omitted or empty
   if (cfg.existsAs<edm::ParameterSet>("triggerExtras")) {
     edm::ParameterSet triggerExtras =
         cfg.getParameter<edm::ParameterSet>("triggerExtras");
     triggerTable_ = iC.consumes<edm::TriggerResults>(
         triggerExtras.getParameter<edm::InputTag>("src"));
     triggerPaths_ =
         triggerExtras.getParameter<std::vector<std::string> >("paths");
   }
 
   // massExtras is optional; in case it's not found no mass
   // window cuts are applied for the same flavor monitor
   // histograms
   if (cfg.existsAs<edm::ParameterSet>("massExtras")) {
     edm::ParameterSet massExtras =
         cfg.getParameter<edm::ParameterSet>("massExtras");
     lowerEdge_ = massExtras.getParameter<double>("lowerEdge");
     upperEdge_ = massExtras.getParameter<double>("upperEdge");
   }
 
   // setup the verbosity level for booking histograms;
   // per default the verbosity level will be set to
   // STANDARD. This will also be the chosen level in
   // the case when the monitoring PSet is not found
   verbosity_ = STANDARD;
   if (cfg.existsAs<edm::ParameterSet>("monitoring")) {
     edm::ParameterSet monitoring =
         cfg.getParameter<edm::ParameterSet>("monitoring");
     if (monitoring.getParameter<std::string>("verbosity") == "DEBUG")
       verbosity_ = DEBUG;
     if (monitoring.getParameter<std::string>("verbosity") == "VERBOSE")
       verbosity_ = VERBOSE;
     if (monitoring.getParameter<std::string>("verbosity") == "STANDARD")
       verbosity_ = STANDARD;
   }
   // and don't forget to do the histogram booking
   directory_ = cfg.getParameter<std::string>("directory");
   // book(ibooker);
 }

TopSingleLepton_miniAOD::MonitorEnsemble::~MonitorEnsemble ( )

inline

default destructor

Definition at line 46 of file TopSingleLeptonDQM_miniAOD.h.

References book(), fill(), and GeneralSetup::setup().

46 {};

Member Function Documentation

void MonitorEnsemble::book ( DQMStore::IBooker & ibooker )

book histograms in subdirectory directory

Definition at line 187 of file TopSingleLeptonDQM_miniAOD.cc.

References DQMStore::IBooker::book1D(), DQMStore::IBooker::book2D(), directory_, vertexPlots::e4, hists_, label_, DQMStore::IBooker::setCurrentFolder(), STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, triggerBinLabels(), triggerPaths_, VERBOSE, and verbosity_.

Referenced by ~MonitorEnsemble().

                                                     {
   // set up the current directory path
   std::string current(directory_);
   current += label_;
   ibooker.setCurrentFolder(current);
 
   // determine number of bins for trigger monitoring
   unsigned int nPaths = triggerPaths_.size();
 
   // --- [STANDARD] --- //
   // Run Number
   hists_["RunNumb_"] = ibooker.book1D("RunNumber", "Run Nr.", 1.e4, 1.5e5, 3.e5);
   // instantaneous luminosity
   hists_["InstLumi_"] = ibooker.book1D("InstLumi", "Inst. Lumi.", 100, 0., 1.e3);
   // number of selected primary vertices
   hists_["pvMult_"] = ibooker.book1D("PvMult", "N_{pvs}", 100, 0., 100.);
   // pt of the leading muon
   hists_["muonPt_"] = ibooker.book1D("MuonPt", "pt(#mu)", 50, 0., 250.);
   // muon multiplicity before std isolation
   hists_["muonMult_"] = ibooker.book1D("MuonMult", "N_{All}(#mu)", 10, 0., 10.);
   // muon multiplicity after  std isolation
   hists_["muonMultIso_"] = ibooker.book1D("MuonMultIso",
       "N_{Iso}(#mu)", 10, 0., 10.);
   // pt of the leading electron
   hists_["elecPt_"] = ibooker.book1D("ElecPt", "pt(e)", 50, 0., 250.);
   // electron multiplicity before std isolation
   hists_["elecMult_"] = ibooker.book1D("ElecMult", "N_{All}(e)", 10, 0., 10.);
   // electron multiplicity after  std isolation
   hists_["elecMultIso_"] = ibooker.book1D("ElecMultIso", "N_{Iso}(e)", 10, 0., 10.);
   // multiplicity of jets with pt>20 (corrected to L2+L3)
   hists_["jetMult_"] = ibooker.book1D("JetMult", "N_{30}(jet)", 10, 0., 10.);
   // trigger efficiency estimates for single lepton triggers
   hists_["triggerEff_"] = ibooker.book1D("TriggerEff",
       "Eff(trigger)", nPaths, 0., nPaths);
   // monitored trigger occupancy for single lepton triggers
   hists_["triggerMon_"] = ibooker.book1D("TriggerMon",
       "Mon(trigger)", nPaths, 0., nPaths);
   // MET (calo)
   hists_["slimmedMETs_"] = ibooker.book1D("slimmedMETs", "MET_{slimmed}", 50, 0., 200.);
   // W mass estimate
   hists_["massW_"] = ibooker.book1D("MassW", "M(W)", 60, 0., 300.);
   // Top mass estimate
   hists_["massTop_"] = ibooker.book1D("MassTop", "M(Top)", 50, 0., 500.);
   // b-tagged Top mass
   hists_["massBTop_"] = ibooker.book1D("MassBTop", "M(Top, 1 b-tag)", 50, 0., 500.);
   // set bin labels for trigger monitoring
   triggerBinLabels(std::string("trigger"), triggerPaths_);
 
   if (verbosity_ == STANDARD) return;
 
   // --- [VERBOSE] --- //
   // eta of the leading muon
   hists_["muonEta_"] = ibooker.book1D("MuonEta", "#eta(#mu)", 30, -3., 3.);
   // relative isolation of the candidate muon (depending on the decay channel)
   hists_["muonRelIso_"] = ibooker.book1D(
       "MuonRelIso", "Iso_{Rel}(#mu) (#Delta#beta Corrected)", 50, 0., 1.);
   // eta of the leading electron
   hists_["elecEta_"] = ibooker.book1D("ElecEta", "#eta(e)", 30, -3., 3.);
   // std isolation variable of the leading electron
   hists_["elecRelIso_"] = ibooker.book1D("ElecRelIso", "Iso_{Rel}(e)", 50, 0., 1.);
   // multiplicity of btagged jets (for track counting high efficiency) with
   // pt(L2L3)>30
   hists_["jetMultBEff_"] = ibooker.book1D("JetMultBEff",
       "N_{30}(TCHE)", 10, 0., 10.);
   // btag discriminator for track counting high efficiency for jets with
   // pt(L2L3)>30
   hists_["jetBDiscEff_"] = ibooker.book1D("JetBDiscEff",
       "Disc_{TCHE}(jet)", 100, 0., 10.);
   // eta of the 1. leading jet (corrected to L2+L3)
   hists_["jet1Eta_"] = ibooker.book1D("Jet1Eta", "#eta_{L2L3}(jet1)", 60, -3., 3.);
   // pt of the 1. leading jet (corrected to L2+L3)
   hists_["jet1Pt_"] = ibooker.book1D("Jet1Pt", "pt_{L2L3}(jet1)", 60, 0., 300.);
   // eta of the 2. leading jet (corrected to L2+L3)
   hists_["jet2Eta_"] = ibooker.book1D("Jet2Eta", "#eta_{L2L3}(jet2)", 60, -3., 3.);
   // pt of the 2. leading jet (corrected to L2+L3)
   hists_["jet2Pt_"] = ibooker.book1D("Jet2Pt", "pt_{L2L3}(jet2)", 60, 0., 300.);
   // eta of the 3. leading jet (corrected to L2+L3)
   hists_["jet3Eta_"] = ibooker.book1D("Jet3Eta", "#eta_{L2L3}(jet3)", 60, -3., 3.);
   // pt of the 3. leading jet (corrected to L2+L3)
   hists_["jet3Pt_"] = ibooker.book1D("Jet3Pt", "pt_{L2L3}(jet3)", 60, 0., 300.);
   // eta of the 4. leading jet (corrected to L2+L3)
   hists_["jet4Eta_"] = ibooker.book1D("Jet4Eta", "#eta_{L2L3}(jet4)", 60, -3., 3.);
   // pt of the 4. leading jet (corrected to L2+L3)
   hists_["jet4Pt_"] = ibooker.book1D("Jet4Pt", "pt_{L2L3}(jet4)", 60, 0., 300.);
   // MET (tc)
   hists_["slimmedMETsNoHF_"] = ibooker.book1D("slimmedMETsNoHF", "MET_{slimmedNoHF}", 50, 0., 200.);
   // MET (pflow)
   hists_["slimmedMETsPuppi_"] = ibooker.book1D("slimmedMETsPuppi", "MET_{slimmedPuppi}", 50, 0., 200.);
   // dz for muons (to suppress cosmis)
   hists_["muonDelZ_"] = ibooker.book1D("MuonDelZ", "d_{z}(#mu)", 50, -25., 25.);
   // dxy for muons (to suppress cosmics)
   hists_["muonDelXY_"] = ibooker.book2D("MuonDelXY",
       "d_{xy}(#mu)", 50, -0.1, 0.1, 50, -0.1, 0.1);
 
   // set axes titles for dxy for muons
   hists_["muonDelXY_"]->setAxisTitle("x [cm]", 1);
   hists_["muonDelXY_"]->setAxisTitle("y [cm]", 2);
 
   if (verbosity_ == VERBOSE) return;
 
   // --- [DEBUG] --- //
   // charged hadron isolation component of the candidate muon (depending on the
   // decay channel)
   hists_["muonChHadIso_"] = ibooker.book1D("MuonChHadIsoComp",
       "ChHad_{IsoComponent}(#mu)", 50, 0., 5.);
   // neutral hadron isolation component of the candidate muon (depending on the
   // decay channel)
   hists_["muonNeHadIso_"] = ibooker.book1D("MuonNeHadIsoComp",
       "NeHad_{IsoComponent}(#mu)", 50, 0., 5.);
   // photon isolation component of the candidate muon (depending on the decay
   // channel)
   hists_["muonPhIso_"] = ibooker.book1D("MuonPhIsoComp",
       "Photon_{IsoComponent}(#mu)", 50, 0., 5.);
   // charged hadron isolation component of the candidate electron (depending on
   // the decay channel)
   hists_["elecChHadIso_"] = ibooker.book1D("ElectronChHadIsoComp",
       "ChHad_{IsoComponent}(e)", 50, 0., 5.);
   // neutral hadron isolation component of the candidate electron (depending on
   // the decay channel)
   hists_["elecNeHadIso_"] = ibooker.book1D("ElectronNeHadIsoComp",
       "NeHad_{IsoComponent}(e)", 50, 0., 5.);
   // photon isolation component of the candidate electron (depending on the
   // decay channel)
   hists_["elecPhIso_"] = ibooker.book1D("ElectronPhIsoComp",
       "Photon_{IsoComponent}(e)", 50, 0., 5.);
   // multiplicity of btagged jets (for track counting high purity) with
   // pt(L2L3)>30
   hists_["jetMultBPur_"] = ibooker.book1D("JetMultBPur",
       "N_{30}(TCHP)", 10, 0., 10.);
   // btag discriminator for track counting high purity
   hists_["jetBDiscPur_"] = ibooker.book1D("JetBDiscPur",
       "Disc_{TCHP}(Jet)", 100, 0., 10.);
   // multiplicity of btagged jets (for simple secondary vertex) with pt(L2L3)>30
   hists_["jetMultBVtx_"] = ibooker.book1D("JetMultBVtx",
       "N_{30}(SSVHE)", 10, 0., 10.);
   // btag discriminator for simple secondary vertex
   hists_["jetBDiscVtx_"] = ibooker.book1D("JetBDiscVtx",
       "Disc_{SSVHE}(Jet)", 35, -1., 6.);
   // multiplicity for combined secondary vertex
   hists_["jetMultCSVtx_"] = ibooker.book1D("JetMultCSV", "N_{30}(CSV)", 10, 0., 10.);
   // btag discriminator for combined secondary vertex
   hists_["jetBCVtx_"] = ibooker.book1D("JetDiscCSV",
       "Disc_{CSV}(JET)", 100, -1., 2.);
   // pt of the 1. leading jet (uncorrected)
   hists_["jet1PtRaw_"] = ibooker.book1D("Jet1PtRaw", "pt_{Raw}(jet1)", 60, 0., 300.);
   // pt of the 2. leading jet (uncorrected)
   hists_["jet2PtRaw_"] = ibooker.book1D("Jet2PtRaw", "pt_{Raw}(jet2)", 60, 0., 300.);
   // pt of the 3. leading jet (uncorrected)
   hists_["jet3PtRaw_"] = ibooker.book1D("Jet3PtRaw", "pt_{Raw}(jet3)", 60, 0., 300.);
   // pt of the 4. leading jet (uncorrected)
   hists_["jet4PtRaw_"] = ibooker.book1D("Jet4PtRaw", "pt_{Raw}(jet4)", 60, 0., 300.);
   // selected events
   hists_["eventLogger_"] = ibooker.book2D("EventLogger",
       "Logged Events", 9, 0., 9., 10, 0., 10.);
 
   // set axes titles for selected events
   hists_["eventLogger_"]->getTH1()->SetOption("TEXT");
   hists_["eventLogger_"]->setBinLabel(1, "Run", 1);
   hists_["eventLogger_"]->setBinLabel(2, "Block", 1);
   hists_["eventLogger_"]->setBinLabel(3, "Event", 1);
   hists_["eventLogger_"]->setBinLabel(4, "pt_{L2L3}(jet1)", 1);
   hists_["eventLogger_"]->setBinLabel(5, "pt_{L2L3}(jet2)", 1);
   hists_["eventLogger_"]->setBinLabel(6, "pt_{L2L3}(jet3)", 1);
   hists_["eventLogger_"]->setBinLabel(7, "pt_{L2L3}(jet4)", 1);
   hists_["eventLogger_"]->setBinLabel(8, "M_{W}", 1);
   hists_["eventLogger_"]->setBinLabel(9, "M_{Top}", 1);
   hists_["eventLogger_"]->setAxisTitle("logged evts", 2);
   return;
 }

bool TopSingleLepton_miniAOD::MonitorEnsemble::booked ( const std::string histName ) const

inlineprivate

check if histogram was booked

Definition at line 73 of file TopSingleLeptonDQM_miniAOD.h.

References hists_.

Referenced by fill().

                                               {
     return hists_.find(histName.c_str()) != hists_.end();
   };

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

fill monitor histograms with electronId and jetCorrections

Definition at line 357 of file TopSingleLeptonDQM_miniAOD.cc.

References pat::Jet::bDiscriminator(), elecIso_, PatTopSelectionAnalyzer_cfi::elecs, elecs_, elecSelect_, electronId_, reco::LeafCandidate::eta(), edm::Event::eventAuxiliary(), edm::Event::getByToken(), training_settings::idx, edm::EDGetTokenT< T >::isUninitialized(), metsig::jet, fwrapper::jets, jets_, jetSelect, hpstanc_transforms::max, RazorAnalyzer::met, mets_, metsig::muon, muonIso_, electronCleaner_cfi::muons, muons_, muonSelect_, reco::LeafCandidate::pt(), MetAnalyzer::pv(), pvs_, pvSelect_, edm::EventAuxiliary::run(), triggerTable_, and pseudoTop_cfi::wMass.

Referenced by fill(), selectionPath(), and ~MonitorEnsemble().

                                                        {
   // fetch trigger event if configured such
   edm::Handle<edm::TriggerResults> triggerTable;
 
   if (!triggerTable_.isUninitialized()) {
     if (!event.getByToken(triggerTable_, triggerTable)) return;
   }
 
   /*
   ------------------------------------------------------------
 
   Primary Vertex Monitoring
 
   ------------------------------------------------------------
   */
   // fill monitoring plots for primary verices
   edm::Handle<edm::View<reco::Vertex> > pvs;
   if (!event.getByToken(pvs_, pvs)) return;
   unsigned int pvMult = 0;
   for (edm::View<reco::Vertex>::const_iterator pv = pvs->begin();
        pv != pvs->end(); ++pv) {
     if (!pvSelect_ || (*pvSelect_)(*pv)) pvMult++;
   }
   fill("pvMult_", pvMult);
 
   /*
   ------------------------------------------------------------
 
   Run and Inst. Luminosity information (Inst. Lumi. filled now with a dummy
   value=5.0)
 
   ------------------------------------------------------------
   */
   if (!event.eventAuxiliary().run()) return;
   fill("RunNumb_", event.eventAuxiliary().run());
 
   double dummy = 5.;
   fill("InstLumi_", dummy);
 
   /*
   ------------------------------------------------------------
 
   Electron Monitoring
 
   ------------------------------------------------------------
   */
 
   // fill monitoring plots for electrons
   edm::Handle<edm::View<pat::Electron> > elecs;
   if (!event.getByToken(elecs_, elecs)) return;
 
   // check availability of electron id
   edm::Handle<edm::ValueMap<float> > electronId;
   if (!electronId_.isUninitialized()) {
     if (!event.getByToken(electronId_, electronId)) return;
   }
 
   // loop electron collection
   unsigned int eMult = 0, eMultIso = 0;
   std::vector<const pat::Electron*> isoElecs;
 
 
  for (edm::View<pat::Electron>::const_iterator elec = elecs->begin();
        elec != elecs->end(); ++elec) {
 
       if(true){//no electron id applied yet!
       if (!elecSelect_ || (*elecSelect_)(*elec)) {
 
         double el_ChHadIso = elec->pfIsolationVariables().sumChargedHadronPt;
         double el_NeHadIso = elec->pfIsolationVariables().sumNeutralHadronEt;
         double el_PhIso = elec->pfIsolationVariables().sumPhotonEt;
         double el_pfRelIso =
             (el_ChHadIso +
              max(0., el_NeHadIso + el_PhIso -
                          0.5 * elec->pfIsolationVariables().sumPUPt)) /
             elec->pt();
         if (eMult == 0) {
           // restrict to the leading electron
           fill("elecPt_", elec->pt());
           fill("elecEta_", elec->eta());
           fill("elecRelIso_", el_pfRelIso);
           fill("elecChHadIso_", el_ChHadIso);
           fill("elecNeHadIso_", el_NeHadIso);
           fill("elecPhIso_", el_PhIso);
         }
 
         ++eMult;
         if (!elecIso_ || (*elecIso_)(*elec)) {
           isoElecs.push_back(&(*elec));
           ++eMultIso;
         }
       }
     }
   }
   fill("elecMult_", eMult);
   fill("elecMultIso_", eMultIso);
 
   /*
   ------------------------------------------------------------
 
   Muon Monitoring
 
   ------------------------------------------------------------
   */
 
   // fill monitoring plots for muons
   unsigned int mMult = 0, mMultIso = 0;
 
   edm::Handle<edm::View<pat::Muon> > muons;
   edm::View<pat::Muon>::const_iterator muonit;
 
   if (!event.getByToken(muons_, muons)) return;
 
 
 
   for (edm::View<pat::Muon>::const_iterator muon = muons->begin();
        muon != muons->end(); ++muon) {
 
 
     // restrict to globalMuons
     if (muon->isGlobalMuon()) {
       fill("muonDelZ_", muon->innerTrack()->vz());  // CB using inner track!
       fill("muonDelXY_", muon->innerTrack()->vx(), muon->innerTrack()->vy());
 
 
 
       // apply preselection
       if (!muonSelect_ || (*muonSelect_)(*muon)) {
  
 
         double chHadPt = muon->pfIsolationR04().sumChargedHadronPt;
         double neHadEt = muon->pfIsolationR04().sumNeutralHadronEt;
         double phoEt = muon->pfIsolationR04().sumPhotonEt;
 
         double pfRelIso =
             (chHadPt +
              max(0., neHadEt + phoEt - 0.5 * muon->pfIsolationR04().sumPUPt)) /
             muon->pt();  // CB dBeta corrected iso!
 
         if (mMult == 0) {
           // restrict to leading muon
           fill("muonPt_", muon->pt());
           fill("muonEta_", muon->eta());
 
           fill("muonRelIso_", pfRelIso);
 
           fill("muonChHadIso_", chHadPt);
           fill("muonNeHadIso_", neHadEt);
           fill("muonPhIso_", phoEt);
         }
         ++mMult;
         if (!muonIso_ || (*muonIso_)(*muon)) ++mMultIso;
       }
     }
   }
   fill("muonMult_", mMult);
   fill("muonMultIso_", mMultIso);
 
   /*
   ------------------------------------------------------------
 
   Jet Monitoring
 
   ------------------------------------------------------------
   */
 
 
   // loop jet collection
   std::vector<pat::Jet> correctedJets;
   std::vector<double> JetTagValues;
   unsigned int mult = 0, multBEff = 0, multBPur = 0, multBVtx = 0, multCSV = 0;
 
   edm::Handle<edm::View<pat::Jet> > jets;
   if (!event.getByToken(jets_, jets)) {
     return;
   }
 
   for (edm::View<pat::Jet>::const_iterator jet = jets->begin();
        jet != jets->end(); ++jet) {
     // check jetID for calo jets
     unsigned int idx = jet - jets->begin();
 
       pat::Jet sel = *jet;
 
       if(!(*jetSelect)(sel))continue;
 //      if (!jetSelect(sel)) continue;
 
     // prepare jet to fill monitor histograms
     pat::Jet monitorJet = *jet;
 
     correctedJets.push_back(monitorJet);
     ++mult;  // determine jet multiplicity
 
       fill("jetBDiscEff_", monitorJet.bDiscriminator("pfCombinedInclusiveSecondaryVertexV2BJetTags")); //hard coded discriminator and value right now.
       if (monitorJet.bDiscriminator("pfCombinedInclusiveSecondaryVertexV2BJetTags") > 0.89) ++multBEff;
 
 
       // Fill a vector with Jet b-tag WP for later M3+1tag calculation: CSV
       // tagger
       JetTagValues.push_back(monitorJet.bDiscriminator("pfCombinedInclusiveSecondaryVertexV2BJetTags"));
 //    }
     // fill pt (raw or L2L3) for the leading four jets
     if (idx == 0) {
       fill("jet1Pt_", monitorJet.pt());
       fill("jet1PtRaw_", jet->pt());
       fill("jet1Eta_", monitorJet.eta());
     };
     if (idx == 1) {
       fill("jet2Pt_", monitorJet.pt());
       fill("jet2PtRaw_", jet->pt());
       fill("jet2Eta_", monitorJet.eta());
     }
     if (idx == 2) {
       fill("jet3Pt_", monitorJet.pt());
       fill("jet3PtRaw_", jet->pt());
       fill("jet3Eta_", monitorJet.eta());
     }
     if (idx == 3) {
       fill("jet4Pt_", monitorJet.pt());
       fill("jet4PtRaw_", jet->pt());
       fill("jet4Eta_", monitorJet.eta());
     }
   }
   fill("jetMult_", mult);
   fill("jetMultBEff_", multBEff);
   fill("jetMultBPur_", multBPur);
   fill("jetMultBVtx_", multBVtx);
   fill("jetMultCSVtx_", multCSV);
 
   /*
   ------------------------------------------------------------
 
   MET Monitoring
 
   ------------------------------------------------------------
   */
 
   // fill monitoring histograms for met
   for (std::vector<edm::EDGetTokenT<edm::View<pat::MET> > >::const_iterator
            met_ = mets_.begin();
        met_ != mets_.end(); ++met_) {
     edm::Handle<edm::View<pat::MET> > met;
     if (!event.getByToken(*met_, met)) continue;
     if (met->begin() != met->end()) {
       unsigned int idx = met_ - mets_.begin();
       if (idx == 0) fill("slimmedMETs_", met->begin()->et());
       if (idx == 1) fill("slimmedMETsNoHF_", met->begin()->et());
       if (idx == 2) fill("slimmedMETsPuppi_", met->begin()->et());
     }
   }
 
   /*
   ------------------------------------------------------------
 
   Event Monitoring
 
   ------------------------------------------------------------
   */
 
   // fill W boson and top mass estimates
 
   Calculate_miniAOD eventKinematics(MAXJETS, WMASS);
   double wMass = eventKinematics.massWBoson(correctedJets);
   double topMass = eventKinematics.massTopQuark(correctedJets);
   if (wMass >= 0 && topMass >= 0) {
     fill("massW_", wMass);
     fill("massTop_", topMass);
   }
 
   // Fill M3 with Btag (CSV Tight) requirement
 
  // if (!includeBTag_) return;
   if (correctedJets.size() != JetTagValues.size()) return;
   double btopMass =
       eventKinematics.massBTopQuark(correctedJets, JetTagValues, 0.89); //hard coded CSVv2 value
   
   if (btopMass >= 0) fill("massBTop_", btopMass);
 
 }

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::TriggerResults &	triggerTable,
		std::string	channel,
		const std::vector< std::string >	labels
	)		const

inlineprivate

fill trigger monitoring histograms

Definition at line 172 of file TopSingleLeptonDQM_miniAOD.h.

References accept(), fill(), hists_, training_settings::idx, monitorPath(), and selectionPath().

                                                                            {
   for (unsigned int idx = 0; idx < labels.size(); ++idx) {
     if (accept(event, triggerTable, monitorPath(labels[idx]))) {
       fill((channel + "Mon_").c_str(), idx + 0.5);
       // take care to fill triggerMon_ before evts is being called
       int evts = hists_.find((channel + "Mon_").c_str())
                      ->second->getBinContent(idx + 1);
       double value = hists_.find((channel + "Eff_").c_str())
                          ->second->getBinContent(idx + 1);
       fill(
           (channel + "Eff_").c_str(), idx + 0.5,
           1. / evts * (accept(event, triggerTable, selectionPath(labels[idx])) -
                        value));
     }
   }
 }

void TopSingleLepton_miniAOD::MonitorEnsemble::fill	(	const std::string	histName,
		double	value
	)		const

inlineprivate

fill histogram if it had been booked before

Definition at line 77 of file TopSingleLeptonDQM_miniAOD.h.

References booked(), hists_, and edm::second().

                                                           {
     if (booked(histName.c_str()))
       hists_.find(histName.c_str())->second->Fill(value);
   };

void TopSingleLepton_miniAOD::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 82 of file TopSingleLeptonDQM_miniAOD.h.

References booked(), hists_, and edm::second().

                                                                           {
     if (booked(histName.c_str()))
       hists_.find(histName.c_str())->second->Fill(xValue, yValue);
   };

void TopSingleLepton_miniAOD::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue,
		double	zValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 87 of file TopSingleLeptonDQM_miniAOD.h.

References booked(), hists_, and edm::second().

                                  {
     if (booked(histName.c_str()))
       hists_.find(histName.c_str())->second->Fill(xValue, yValue, zValue);
   };

std::string TopSingleLepton_miniAOD::MonitorEnsemble::monitorPath ( const std::string & label ) const

inlineprivate

deduce monitorPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 56 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by fill(), and triggerBinLabels().

                                                       {
     return label.substr(label.find(':') + 1);
   };

std::string TopSingleLepton_miniAOD::MonitorEnsemble::selectionPath ( const std::string & label ) const

inlineprivate

deduce selectionPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 61 of file TopSingleLeptonDQM_miniAOD.h.

References fill(), tablePrinter::labels, AlCaHLTBitMon_QueryRunRegistry::string, and triggerBinLabels().

Referenced by fill(), and triggerBinLabels().

                                                         {
     return label.substr(0, label.find(':'));
   };

void MonitorEnsemble::triggerBinLabels	(	std::string	channel,
		const std::vector< std::string >	labels
	)

inlineprivate

set configurable labels for trigger monitoring histograms

Definition at line 160 of file TopSingleLeptonDQM_miniAOD.h.

References hists_, training_settings::idx, monitorPath(), and selectionPath().

Referenced by book(), and selectionPath().

                                                           {
   for (unsigned int idx = 0; idx < labels.size(); ++idx) {
     hists_[(channel + "Mon_").c_str()]
         ->setBinLabel(idx + 1, "[" + monitorPath(labels[idx]) + "]", 1);
     hists_[(channel + "Eff_").c_str()]
         ->setBinLabel(idx + 1, "[" + selectionPath(labels[idx]) + "]|[" +
                                    monitorPath(labels[idx]) + "]",
                       1);
   }
 }