#include <DDSolid.h>

Static Public Member Functions
static DDSolid	box (const DDName &name, double xHalf, double yHalf, double zHalf)
	Creates a box with side length 2xHalf, 2yHalf, 2*zHalf. More...

static DDSolid	cons (const DDName &name, double zhalf, double rInMinusZ, double rOutMinusZ, double rInPlusZ, double rOutPlusZ, double phiFrom, double deltaPhi)

static DDSolid	cuttubs (const DDName &name, double zhalf, double rIn, double rOut, double startPhi, double deltaPhi, double lx, double ly, double lz, double tx, double ty, double tz)

static DDSolid	ellipsoid (const DDName &name, double xSemiAxis, double ySemiAxis, double zSemiAxis, double zBottomCut=0., double zTopCut=0.)

static DDSolid	ellipticalTube (const DDName &name, double xSemiAxis, double ySemiAxis, double zHeight)

static DDSolid	intersection (const DDName &name, const DDSolid &a, const DDSolid &b, const DDTranslation &t, const DDRotation &r)

static DDSolid	orb (const DDName &name, double radius)

static DDSolid	parallelepiped (const DDName &name, double xHalf, double yHalf, double zHalf, double alpha, double theta, double phi)

static DDSolid	polycone (const DDName &name, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &rmin, const std::vector< double > &rmax)
	Creates a polycone (refere to Geant3 or Geant4 documentation) More...

static DDSolid	polycone (const DDName &name, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &r)
	Creates a polycone (refere to Geant4 documentation) More...

static DDSolid	polyhedra (const DDName &name, int sides, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &rmin, const std::vector< double > &rmax)
	Creates a polyhedra (refere to Geant3 or Geant4 documentation) More...

static DDSolid	polyhedra (const DDName &name, int sides, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &r)
	Creates a polyhedra (refere to Geant4 documentation) More...

static DDSolid	pseudoTrap (const DDName &name, double pDx1, double pDx2, double pDy1, double pDy2, double pDz, double radius, bool atMinusZ)

static DDSolid	reflection (const DDName &name, const DDSolid &s)

static DDSolid	shapeless (const DDName &name)

static DDSolid	sphere (const DDName &name, double innerRadius, double outerRadius, double startPhi, double deltaPhi, double startTheta, double deltaTheta)

static DDSolid	subtraction (const DDName &name, const DDSolid &a, const DDSolid &b, const DDTranslation &t, const DDRotation &r)

static DDSolid	torus (const DDName &name, double rMin, double rMax, double rTorus, double startPhi, double deltaPhi)

static DDSolid	trap (const DDName &name, double pDz, double pTheta, double pPhi, double pDy1, double pDx1, double pDx2, double pAlp1, double pDy2, double pDx3, double pDx4, double pAlp2)

static DDSolid	truncTubs (const DDName &name, double zHalf, double rIn, double rOut, double startPhi, double deltaPhi, double cutAtStart, double cutAtDelta, bool cutInside)

static DDSolid	tubs (const DDName &name, double zhalf, double rIn, double rOut, double startPhi, double deltaPhi)

static DDSolid	unionSolid (const DDName &name, const DDSolid &a, const DDSolid &b, const DDTranslation &t, const DDRotation &r)

Detailed Description

Definition at line 409 of file DDSolid.h.

Member Function Documentation

DDSolid DDSolidFactory::box	(	const DDName &	name,
		double	xHalf,
		double	yHalf,
		double	zHalf
	)

static

Creates a box with side length 2*xHalf, 2*yHalf, 2*zHalf.

name unique name identifying the box
xHalf half length in x
yHalf half length in y
zHalf helf length in z The center of the box (for positioning) is the center of gravity.

Definition at line 526 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDHCalBarrelAlgo::constructInsideDetectors(), DDHCalBarrelAlgo::constructInsideLayers(), DDEcalPreshowerAlgo::doLadders(), DDEcalPreshowerAlgoTB::doLayers(), DDEcalPreshowerAlgo::doLayers(), DDTIBLayerAlgo_MTCC::execute(), DDHCalForwardAlgo::execute(), DDHCalTBCableAlgo::execute(), DDTIDModuleAlgo::execute(), DDTECModuleAlgo::execute(), DDEcalAPDAlgo::execute(), DDTBH4Algo::execute(), DDEcalBarrelNewAlgo::execute(), DDEcalBarrelAlgo::execute(), DDEcalEndcapAlgo::execute(), DDDividedBoxX::makeDDLogicalPart(), DDDividedBoxY::makeDDLogicalPart(), DDDividedBoxZ::makeDDLogicalPart(), DDLBox::processElement(), regressionTest_first(), and regressionTest_setup().

 {
   return DDSolid(name, new DDI::Box(xHalf, yHalf, zHalf ));
 }

DDSolid DDSolidFactory::cons	(	const DDName &	name,
		double	zhalf,
		double	rInMinusZ,
		double	rOutMinusZ,
		double	rInPlusZ,
		double	rOutPlusZ,
		double	phiFrom,
		double	deltaPhi
	)

static

Definition at line 798 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDHCalFibreBundle::execute(), DDDividedConsRho::makeDDLogicalPart(), DDDividedConsPhi::makeDDLogicalPart(), DDDividedConsZ::makeDDLogicalPart(), DDDividedPolyconeZ::makeDDLogicalPart(), and DDLCone::processElement().

 {
   return DDSolid(name, new DDI::Cons(zhalf,
                                      rInMinusZ, rOutMinusZ,
                      rInPlusZ, rOutPlusZ,
                      phiFrom, deltaPhi));
 }            

DDSolid DDSolidFactory::cuttubs	(	const DDName &	name,
		double	zhalf,
		double	rIn,
		double	rOut,
		double	startPhi,
		double	deltaPhi,
		double	lx,
		double	ly,
		double	lz,
		double	tx,
		double	ty,
		double	tz
	)

static

Definition at line 831 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDCutTubsFromPoints::execute(), and DDLTubs::processElement().

 {            
   return DDSolid(name, new DDI::CutTubs(zhalf,rIn,rOut,phiFrom,deltaPhi,lx,ly,lz,tx,ty,tz));
 }

DDSolid DDSolidFactory::ellipsoid	(	const DDName &	name,
		double	xSemiAxis,
		double	ySemiAxis,
		double	zSemiAxis,
		double	zBottomCut = `0.`,
		double	zTopCut = `0.`
	)

static

Definition at line 865 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLEllipsoid::processElement().

 {
   return DDSolid(name, new DDI::Ellipsoid( xSemiAxis,
                        ySemiAxis,
                        zSemiAxis,
                        zBottomCut,
                        zTopCut
                       ));
 }            

DDSolid DDSolidFactory::ellipticalTube	(	const DDName &	name,
		double	xSemiAxis,
		double	ySemiAxis,
		double	zHeight
	)

static

Definition at line 859 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLEllipticalTube::processElement().

 {
   return DDSolid(name, new DDI::EllipticalTube(xSemiAxis, ySemiAxis, zHeight));
 }            

DDSolid DDSolidFactory::intersection	(	const DDName &	name,
		const DDSolid &	a,
		const DDSolid &	b,
		const DDTranslation &	t,
		const DDRotation &	r
	)

static

Definition at line 749 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLBooleanSolid::processElement(), and DDStreamer::solids_read().

 {
   return DDSolid(name, new DDI::Intersection(a,b,t,r));
 }

DDSolid DDSolidFactory::orb	(	const DDName &	name,
		double	radius
	)

static

Definition at line 854 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLOrb::processElement().

 {
   return DDSolid(name, new DDI::Orb(radius));
 }            

DDSolid DDSolidFactory::parallelepiped	(	const DDName &	name,
		double	xHalf,
		double	yHalf,
		double	zHalf,
		double	alpha,
		double	theta,
		double	phi
	)

static

Definition at line 882 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLParallelepiped::processElement().

 {
   return DDSolid(name, new DDI::Parallelepiped(xHalf, yHalf, zHalf,
                            alpha, theta, phi));
 }            

DDSolid DDSolidFactory::polycone	(	const DDName &	name,
		double	startPhi,
		double	deltaPhi,
		const std::vector< double > &	z,
		const std::vector< double > &	rmin,
		const std::vector< double > &	rmax
	)

static

Creates a polycone (refere to Geant3 or Geant4 documentation)

The center of the polycone (for positioning) is the center of coordinates of the polycone definition (x=y=z=0)

Definition at line 691 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDTIBRadCableAlgo_MTCC::execute(), DDTOBRadCableAlgo::execute(), DDTIDAxialCableAlgo::execute(), DDTECAxialCableAlgo::execute(), DDEcalBarrelNewAlgo::execute(), DDEcalBarrelAlgo::execute(), DDDividedPolyconeRho::makeDDLogicalPart(), DDDividedPolyconePhi::makeDDLogicalPart(), and DDLPolyGenerator::processElement().

 {
   return DDSolid(name, new DDI::Polycone(startPhi, deltaPhi, z, rmin, rmax));
 }

DDSolid DDSolidFactory::polycone	(	const DDName &	name,
		double	startPhi,
		double	deltaPhi,
		const std::vector< double > &	z,
		const std::vector< double > &	r
	)

static

Creates a polycone (refere to Geant4 documentation)

The center of the polycone (for positioning) is the center of coordinates of the polycone definition (x=y=z=0)

Definition at line 700 of file DDSolid.cc.

References DDSolid::DDSolid().

 {
   return DDSolid(name, new DDI::Polycone(startPhi, deltaPhi, z, r));
 }                         

DDSolid DDSolidFactory::polyhedra	(	const DDName &	name,
		int	sides,
		double	startPhi,
		double	deltaPhi,
		const std::vector< double > &	z,
		const std::vector< double > &	rmin,
		const std::vector< double > &	rmax
	)

static

Creates a polyhedra (refere to Geant3 or Geant4 documentation)

The center of the polyhedra (for positioning) is the center of coordinates of the polyhedra definition (x=y=z=0)

Definition at line 708 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDHCalBarrelAlgo::constructGeneralVolume(), DDHCalEndcapAlgo::constructGeneralVolume(), DDHCalBarrelAlgo::constructInsideSector(), DDHCalEndcapAlgo::constructInsideSector(), DDHGCalModuleAlgo::constructLayers(), DDHGCalModule::constructLayers(), DDHCalBarrelAlgo::constructMidLayer(), DDHCalBarrelAlgo::constructSideLayer(), DDHCalTBCableAlgo::execute(), DDDividedPolyhedraRho::makeDDLogicalPart(), DDDividedPolyhedraPhi::makeDDLogicalPart(), DDDividedPolyhedraZ::makeDDLogicalPart(), and DDLPolyGenerator::processElement().

 {       
   return DDSolid(name, new DDI::Polyhedra(sides,  startPhi, deltaPhi, z, rmin,rmax));     
 }

DDSolid DDSolidFactory::polyhedra	(	const DDName &	name,
		int	sides,
		double	startPhi,
		double	deltaPhi,
		const std::vector< double > &	z,
		const std::vector< double > &	r
	)

static

Creates a polyhedra (refere to Geant4 documentation)

The center of the polyhedra (for positioning) is the center of coordinates of the polyhedra definition (x=y=z=0)

Definition at line 720 of file DDSolid.cc.

References DDSolid::DDSolid().

 {
   return DDSolid(name, new DDI::Polyhedra(sides,  startPhi, deltaPhi, z, r));
 }

DDSolid DDSolidFactory::pseudoTrap	(	const DDName &	name,
		double	pDx1,
		double	pDx2,
		double	pDy1,
		double	pDy2,
		double	pDz,
		double	radius,
		bool	atMinusZ
	)

static

if true, the cut-out or rounding is applied at -dz, else at +dz

Parameters

pDx1	Half-length along x at the surface positioned at -dz
pDx2	Half-length along x at the surface positioned at +dz
pDy1	Half-length along y at the surface positioned at -dz
pDy2	Half-length along y at the surface positioned at +dz
pDz	Half of the height of the pseudo trapezoid along z
radius	radius of the cut-out (negative sign) or rounding (pos. sign)
atMinusZ	if true, the cut-out or rounding is applied at -dz, else at +dz

Definition at line 772 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLPseudoTrap::processElement().

 {
    return DDSolid(name, new DDI::PseudoTrap(pDx1, pDx2, pDy1, pDy2, pDz, radius, atMinusZ));
 }

DDSolid DDSolidFactory::reflection	(	const DDName &	name,
		const DDSolid &	s
	)

static

Definition at line 896 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLReflectionSolid::processElement(), and DDStreamer::solids_read().

 {
   return DDSolid(name, new DDI::Reflection(s));
 }                  

DDSolid DDSolidFactory::shapeless ( const DDName & name )

static

Definition at line 890 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLShapelessSolid::processElement(), and regressionTest_setup().

 {
   return DDSolid(name, new DDI::Shapeless());
 }  

DDSolid DDSolidFactory::sphere	(	const DDName &	name,
		double	innerRadius,
		double	outerRadius,
		double	startPhi,
		double	deltaPhi,
		double	startTheta,
		double	deltaTheta
	)

static

Definition at line 841 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLSphere::processElement().

 {
   return DDSolid(name, new DDI::Sphere(innerRadius, outerRadius, 
                        startPhi, deltaPhi,
                        startTheta, deltaTheta));
 }            

DDSolid DDSolidFactory::subtraction	(	const DDName &	name,
		const DDSolid &	a,
		const DDSolid &	b,
		const DDTranslation &	t,
		const DDRotation &	r
	)

static

Definition at line 740 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDEcalPreshowerAlgo::doLayers(), DDEcalEndcapAlgo::EECreateSC(), DDTIDModuleAlgo::execute(), DDEcalBarrelNewAlgo::execute(), DDEcalBarrelAlgo::execute(), DDLBooleanSolid::processElement(), and DDStreamer::solids_read().

 {
   return DDSolid(name, new DDI::Subtraction(a,b,t,r));
 }

DDSolid DDSolidFactory::torus	(	const DDName &	name,
		double	rMin,
		double	rMax,
		double	rTorus,
		double	startPhi,
		double	deltaPhi
	)

static

Definition at line 813 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDTOBRadCableAlgo::execute(), and DDLTorus::processElement().

 {
   return DDSolid(name, new DDI::Torus(rMin, rMax, rTorus, startPhi, deltaPhi));
 }            

DDSolid DDSolidFactory::trap	(	const DDName &	name,
		double	pDz,
		double	pTheta,
		double	pPhi,
		double	pDy1,
		double	pDx1,
		double	pDx2,
		double	pAlp1,
		double	pDy2,
		double	pDx3,
		double	pDx4,
		double	pAlp2
	)

static

Definition at line 758 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDHCalEndcapModuleAlgo::constructInsideModule(), DDHCalEndcapAlgo::constructInsideModule(), DDHCalEndcapModuleAlgo::constructInsideModule0(), DDHCalEndcapAlgo::constructInsideModule0(), DDHGCalEEAlgo::constructLayers(), DDHGCalHEAlgo::constructLayers(), DDHCalEndcapModuleAlgo::constructScintLayer(), DDHCalEndcapAlgo::constructScintLayer(), DDEcalPreshowerAlgo::doLadders(), DDEcalEndcapAlgo::EECreateCR(), DDEcalEndcapAlgo::EECreateSC(), DDHCalTBCableAlgo::execute(), DDPixBarLayerUpgradeAlgoCoverage::execute(), DDTIDModuleAlgo::execute(), DDPixBarLayerAlgo::execute(), DDPixBarTPGStackLayerAlgo::execute(), DDPixBarStackLayerAlgo::execute(), DDTECModuleAlgo::execute(), DDDividedTrdX::makeDDLogicalPart(), DDDividedTrdY::makeDDLogicalPart(), DDDividedTrdZ::makeDDLogicalPart(), DDEcalBarrelNewAlgo::mytrap(), DDEcalBarrelAlgo::mytrap(), and DDLTrapezoid::processElement().

 {
   return DDSolid(name, new DDI::Trap(pDz, pTheta, pPhi,
                                      pDy1, pDx1, pDx2, pAlp1,
                      pDy2, pDx3, pDx4, pAlp2));
 }                    

DDSolid DDSolidFactory::truncTubs	(	const DDName &	name,
		double	zHalf,
		double	rIn,
		double	rOut,
		double	startPhi,
		double	deltaPhi,
		double	cutAtStart,
		double	cutAtDelta,
		bool	cutInside
	)

static

Parameters

zHalf	half-length of the z-axis
rIn	inner radius of the tube-section
rOut	outer radius of the tube-section
startPhi	starting angle of the tube-section
deltaPhi	spanning angle of the tube-section
cutAtStart	tructation
cutAtDelta	truncation at deltaPhi side

Definition at line 785 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDLTubs::processElement().

 {
   return DDSolid(name, new DDI::TruncTubs(zHalf,rIn,rOut,startPhi,deltaPhi,cutAtStart,cutAtDelta,cutInside));
 }                 

DDSolid DDSolidFactory::tubs	(	const DDName &	name,
		double	zhalf,
		double	rIn,
		double	rOut,
		double	startPhi,
		double	deltaPhi
	)

static

Definition at line 823 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDHGCalModule::constructLayers(), DDHGCalModuleAlgo::constructLayers(), DDEcalPreshowerAlgo::doLayers(), DDPixBarStackTrigLayerAlgo::execute(), DDTOBAxCableAlgo::execute(), DDTOBRadCableAlgo::execute(), DDPixBarLayerUpgradeAlgoCoverage::execute(), DDPixBarTPGStackLayerAlgo::execute(), DDTIBLayerAlgo::execute(), DDPixBarStackLayerAlgo::execute(), DDTIBLayerAlgo_MTCC::execute(), DDTIBRadCableAlgo_MTCC::execute(), DDPixBarLayerAlgo::execute(), DDPixBarLayerUpgradeAlgo::execute(), DDTIDAxialCableAlgo::execute(), DDTBH4Algo::execute(), DDEcalBarrelAlgo::execute(), DDEcalBarrelNewAlgo::execute(), DDDividedTubsRho::makeDDLogicalPart(), DDDividedTubsPhi::makeDDLogicalPart(), DDDividedTubsZ::makeDDLogicalPart(), and DDLTubs::processElement().

 {            
   return DDSolid(name, new DDI::Tubs(zhalf,rIn,rOut,phiFrom,deltaPhi));
 }

DDSolid DDSolidFactory::unionSolid	(	const DDName &	name,
		const DDSolid &	a,
		const DDSolid &	b,
		const DDTranslation &	t,
		const DDRotation &	r
	)

static

Definition at line 731 of file DDSolid.cc.

References DDSolid::DDSolid().

Referenced by DDEcalPreshowerAlgo::doLadders(), DDEcalPreshowerAlgo::doLayers(), DDCutTubsFromPoints::execute(), DDLBooleanSolid::processElement(), and DDStreamer::solids_read().

 {
   return DDSolid(name, new DDI::Union(a,b,t,r));
 }

Static Public Member Functions

Detailed Description

Member Function Documentation