#include <CSCAnodeLCTProcessor.h>

Public Types
enum	{ MAX_ALCT_BINS = 16 }

enum	{ NUM_PATTERN_WIRES = 14 }

Public Member Functions
void	clear ()

	CSCAnodeLCTProcessor (unsigned endcap, unsigned station, unsigned sector, unsigned subsector, unsigned chamber, const edm::ParameterSet &conf, const edm::ParameterSet &comm)

	CSCAnodeLCTProcessor ()

std::vector< CSCALCTDigi >	getALCTs ()

bool	getDigis (const CSCWireDigiCollection *wiredc)

void	getDigis (const CSCWireDigiCollection *wiredc, const CSCDetId &id)

std::vector< CSCALCTDigi >	readoutALCTs ()

std::vector< CSCALCTDigi >	run (const CSCWireDigiCollection *wiredc)

void	run (const std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES])

void	setConfigParameters (const CSCDBL1TPParameters *conf)

void	setRing (unsigned r)

Public Attributes
CSCALCTDigi	bestALCT [MAX_ALCT_BINS]

CSCALCTDigi	secondALCT [MAX_ALCT_BINS]

Static Public Attributes
static const int	pattern_envelope [CSCConstants::NUM_ALCT_PATTERNS][NUM_PATTERN_WIRES]

static const int	pattern_mask_open [CSCConstants::NUM_ALCT_PATTERNS][NUM_PATTERN_WIRES]

static const int	pattern_mask_r1 [CSCConstants::NUM_ALCT_PATTERNS][NUM_PATTERN_WIRES]

static const int	pattern_mask_slim [CSCConstants::NUM_ALCT_PATTERNS][NUM_PATTERN_WIRES]

static const int	time_weights [NUM_PATTERN_WIRES]

Private Member Functions
void	accelMode (const int key_wire)

std::vector< CSCALCTDigi >	bestTrackSelector (const std::vector< CSCALCTDigi > &all_alcts)

void	checkConfigParameters ()

void	clear (const int wire, const int pattern)

void	dumpConfigParams () const

void	dumpDigis (const std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES]) const

void	ghostCancellationLogic ()

void	ghostCancellationLogicSLHC ()

bool	isBetterALCT (const CSCALCTDigi &lhsALCT, const CSCALCTDigi &rhsALCT)

void	lctSearch ()

void	loadPatternMask ()

bool	patternDetection (const int key_wire)

bool	preTrigger (const int key_wire, const int start_bx)

bool	pulseExtension (const std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES])

void	readWireDigis (std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES])

void	setDefaultConfigParameters ()

void	showPatterns (const int key_wire)

void	trigMode (const int key_wire)

Private Attributes
unsigned int	accel_mode

std::vector< CSCWireDigi >	digiV [CSCConstants::NUM_LAYERS]

bool	disableME1a

unsigned int	drift_delay

int	early_tbins

unsigned int	fifo_pretrig

unsigned int	fifo_tbins

int	first_bx [CSCConstants::MAX_NUM_WIRES]

int	first_bx_corrected [CSCConstants::MAX_NUM_WIRES]

int	ghost_cancellation_bx_depth

bool	ghost_cancellation_side_quality

unsigned int	hit_persist

int	infoV

bool	isME11

bool	isMTCC

bool	isSLHC

bool	isTMB07

unsigned int	l1a_window_width

int	MESelection

bool	narrow_mask_r1

unsigned int	nplanes_hit_accel_pattern

unsigned int	nplanes_hit_accel_pretrig

unsigned int	nplanes_hit_pattern

unsigned int	nplanes_hit_pretrig

int	numWireGroups

int	pattern_mask [CSCConstants::NUM_ALCT_PATTERNS][NUM_PATTERN_WIRES]

unsigned int	pretrig_extra_deadtime

unsigned int	pulse [CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES]

int	quality [CSCConstants::MAX_NUM_WIRES][3]

bool	runME21ILT_

bool	runME3141ILT_

unsigned	theChamber

const unsigned	theEndcap

unsigned	theRing

const unsigned	theSector

const unsigned	theStation

const unsigned	theSubsector

const unsigned	theTrigChamber

unsigned int	trig_mode

bool	use_corrected_bx

Static Private Attributes
static const unsigned int	def_accel_mode = 0

static const unsigned int	def_drift_delay = 2

static const unsigned int	def_fifo_pretrig = 10

static const unsigned int	def_fifo_tbins = 16

static const unsigned int	def_l1a_window_width = 7

static const unsigned int	def_nplanes_hit_accel_pattern = 4

static const unsigned int	def_nplanes_hit_accel_pretrig = 2

static const unsigned int	def_nplanes_hit_pattern = 4

static const unsigned int	def_nplanes_hit_pretrig = 2

static const unsigned int	def_trig_mode = 2

Detailed Description

This class simulates the functionality of the anode LCT card. It is run by the MotherBoard and returns up to two AnodeLCTs. It can be run either in a test mode, where it is passed an array of wire times, or in normal mode where it determines the wire times from the wire digis.

Author: Benn Tannenbaum benn@.nosp@m.phys.nosp@m.ics.u.nosp@m.cla..nosp@m.edu 13 July 1999 Numerous later improvements by Jason Mumford and Slava Valuev (see cvs in ORCA). Porting from ORCA by S. Valuev (Slava.nosp@m..Val.nosp@m.uev@c.nosp@m.ern..nosp@m.ch), May 2006.

Definition at line 27 of file CSCAnodeLCTProcessor.h.

Member Enumeration Documentation

anonymous enum

Maximum number of time bins reported in the ALCT readout.

Enumerator
MAX_ALCT_BINS

Definition at line 58 of file CSCAnodeLCTProcessor.h.

58 {MAX_ALCT_BINS = 16};

CSCAnodeLCTProcessor::MAX_ALCT_BINS

Definition: CSCAnodeLCTProcessor.h:58

anonymous enum

Pre-defined patterns.

Enumerator
NUM_PATTERN_WIRES

Definition at line 80 of file CSCAnodeLCTProcessor.h.

80 {NUM_PATTERN_WIRES = 14};

CSCAnodeLCTProcessor::NUM_PATTERN_WIRES

Definition: CSCAnodeLCTProcessor.h:80

Constructor & Destructor Documentation

CSCAnodeLCTProcessor::CSCAnodeLCTProcessor	(	unsigned	endcap,
		unsigned	station,
		unsigned	sector,
		unsigned	subsector,
		unsigned	chamber,
		const edm::ParameterSet &	conf,
		const edm::ParameterSet &	comm
	)

Normal constructor.

Definition at line 184 of file CSCAnodeLCTProcessor.cc.

References accel_mode, CSCTriggerNumbering::chamberFromTriggerLabels(), checkConfigParameters(), disableME1a, drift_delay, dumpConfigParams(), early_tbins, edm::ParameterSet::existsAs(), fifo_pretrig, fifo_tbins, edm::ParameterSet::getParameter(), ghost_cancellation_bx_depth, ghost_cancellation_side_quality, hit_persist, infoV, isME11, isMTCC, isSLHC, isTMB07, l1a_window_width, loadPatternMask(), MESelection, narrow_mask_r1, nplanes_hit_accel_pattern, nplanes_hit_accel_pretrig, nplanes_hit_pattern, nplanes_hit_pretrig, numWireGroups, pretrig_extra_deadtime, CSCTriggerNumbering::ringFromTriggerLabels(), runME21ILT_, runME3141ILT_, theChamber, theRing, theSector, theStation, theSubsector, theTrigChamber, trig_mode, and use_corrected_bx.

                                                                         : 
                      theEndcap(endcap), theStation(station), theSector(sector),
                      theSubsector(subsector), theTrigChamber(chamber) {
   static bool config_dumped = false;
 
   // ALCT configuration parameters.
   fifo_tbins   = conf.getParameter<unsigned int>("alctFifoTbins");
   fifo_pretrig = conf.getParameter<unsigned int>("alctFifoPretrig");
   drift_delay  = conf.getParameter<unsigned int>("alctDriftDelay");
   nplanes_hit_pretrig =
     conf.getParameter<unsigned int>("alctNplanesHitPretrig");
   nplanes_hit_pattern =
     conf.getParameter<unsigned int>("alctNplanesHitPattern");
   nplanes_hit_accel_pretrig =
     conf.getParameter<unsigned int>("alctNplanesHitAccelPretrig");
   nplanes_hit_accel_pattern =
     conf.getParameter<unsigned int>("alctNplanesHitAccelPattern");
   trig_mode        = conf.getParameter<unsigned int>("alctTrigMode");
   accel_mode       = conf.getParameter<unsigned int>("alctAccelMode");
   l1a_window_width = conf.getParameter<unsigned int>("alctL1aWindowWidth");
 
   hit_persist  = conf.getParameter<unsigned int>("alctHitPersist");
 
   // Verbosity level, set to 0 (no print) by default.
   infoV        = conf.getParameter<int>("verbosity");
 
   // Other parameters.
   // Use open pattern instead of more restrictive (slim) ones.
   isMTCC       = comm.getParameter<bool>("isMTCC");
   // Use TMB07 flag for DAQ-2006 firmware version (implemented in late 2007).
   isTMB07      = comm.getParameter<bool>("isTMB07");
 
   // Flag for SLHC studies
   isSLHC       = comm.getParameter<bool>("isSLHC");
 
   // special configuration parameters for ME11 treatment
   disableME1a = comm.getParameter<bool>("disableME1a");
 
   // separate handle for early time bins
   early_tbins = conf.getParameter<int>("alctEarlyTbins");
   int fpga_latency = 6;
   if (early_tbins<0) early_tbins  = fifo_pretrig - fpga_latency;
 
   // delta BX time depth for ghostCancellationLogic
   ghost_cancellation_bx_depth = conf.getParameter<int>("alctGhostCancellationBxDepth");
 
   // whether to consider ALCT candidates' qualities while doing ghostCancellationLogic on +-1 wire groups
   ghost_cancellation_side_quality = conf.getParameter<bool>("alctGhostCancellationSideQuality");
 
   // deadtime clocks after pretrigger (extra in addition to drift_delay)
   pretrig_extra_deadtime = conf.getParameter<unsigned int>("alctPretrigDeadtime");
 
   // whether to use narrow pattern mask for the rings close to the beam
   narrow_mask_r1 = conf.getParameter<bool>("alctNarrowMaskForR1");
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if ((infoV > 0 || isSLHC) && !config_dumped) {
     //std::cout<<"**** ALCT constructor parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 
   numWireGroups = 0;  // Will be set later.
   MESelection   = (theStation < 3) ? 0 : 1;
 
   theRing = CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber);
 
   theChamber = CSCTriggerNumbering::chamberFromTriggerLabels(theSector, theSubsector,
                                                              theStation, theTrigChamber);
 
   // trigger numbering doesn't distinguish between ME1a and ME1b chambers:
   isME11 = (theStation == 1 && theRing == 1);
 
   // whether to calculate bx as corrected_bx instead of pretrigger one
   use_corrected_bx = false;
   if (isSLHC && isME11) {
     use_corrected_bx = conf.getParameter<bool>("alctUseCorrectedBx");
   }
 
   // run the ALCT processor for the Phase-II ME2/1 integrated local trigger
   runME21ILT_ = conf.existsAs<bool>("runME21ILT")?
     conf.getParameter<bool>("runME21ILT"):false;
 
   // run the ALCT processor for the Phase-II ME3/1-ME4/1 integrated local trigger
   runME3141ILT_ = conf.existsAs<bool>("runME3141ILT")?
     conf.getParameter<bool>("runME3141ILT"):false;
 
   //if (theStation==1 && theRing==2) infoV = 3;
 
   // Load appropriate pattern mask.
   loadPatternMask();
 }

CSCAnodeLCTProcessor::CSCAnodeLCTProcessor ( )

Default constructor. Used for testing.

Definition at line 282 of file CSCAnodeLCTProcessor.cc.

References CSCTriggerNumbering::chamberFromTriggerLabels(), checkConfigParameters(), disableME1a, dumpConfigParams(), early_tbins, infoV, isME11, isMTCC, isSLHC, isTMB07, loadPatternMask(), CSCConstants::MAX_NUM_WIRES, MESelection, numWireGroups, CSCTriggerNumbering::ringFromTriggerLabels(), setDefaultConfigParameters(), theChamber, theRing, theSector, theStation, theSubsector, and theTrigChamber.

                                            :
                        theEndcap(1), theStation(1), theSector(1),
                      theSubsector(1), theTrigChamber(1) {
   // Used for debugging. -JM
   static bool config_dumped = false;
 
   // ALCT parameters.
   setDefaultConfigParameters();
   infoV = 2;
   isMTCC  = false;
   isTMB07 = true;
 
   isSLHC = false;
   disableME1a = false;
 
   early_tbins = 4;
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (!config_dumped) {
     //std::cout<<"**** ALCT default constructor parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 
   numWireGroups = CSCConstants::MAX_NUM_WIRES;
   MESelection   = (theStation < 3) ? 0 : 1;
 
   theRing = CSCTriggerNumbering::ringFromTriggerLabels(theStation, theTrigChamber);
   theChamber = CSCTriggerNumbering::chamberFromTriggerLabels(theSector, theSubsector,
                                                              theStation, theTrigChamber);
   isME11 = (theStation == 1 && theRing == 1);
 
   // Load pattern mask.
   loadPatternMask();
 }

Member Function Documentation

void CSCAnodeLCTProcessor::accelMode ( const int key_wire )

private

Definition at line 1516 of file CSCAnodeLCTProcessor.cc.

References accel_mode, infoV, LogTrace, and quality.

Referenced by lctSearch().

                                                        {
   /* Function which gives a preference either to the collision patterns
      or accelerator patterns.  The function uses the accel_mode parameter
      to decide. */
   int promotionBit = 1 << 2;
 
   switch(accel_mode) {
   default:
   case 0:
     // Ignore accelerator muons.
     if (quality[key_wire][0] > 0) {
       quality[key_wire][0] = 0;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "alctMode(): accelerator track " << key_wire << " ignored" << "\n";
     }
     break;
   case 1:
     // Prefer collision muons by adding promotion bit.
     if (quality[key_wire][1] > 0) {
       quality[key_wire][1] += promotionBit;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "alctMode(): collision track " << key_wire << " promoted" << "\n";
     }
     break;
   case 2:
     // Prefer accelerator muons by adding promotion bit.
     if (quality[key_wire][0] > 0) {
       quality[key_wire][0] += promotionBit;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "alctMode(): accelerator track " << key_wire << " promoted"<< "\n";
     }
     break;
   case 3:
     // Ignore collision muons.
     if (quality[key_wire][1] > 0) {
       quality[key_wire][1] = 0;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "alctMode(): collision track " << key_wire << " ignored" << "\n";
     }
     break;
   }
 }

std::vector< CSCALCTDigi > CSCAnodeLCTProcessor::bestTrackSelector ( const std::vector< CSCALCTDigi > & all_alcts )

private

Definition at line 1346 of file CSCAnodeLCTProcessor.cc.

References CSCALCTDigi::getBX(), CSCALCTDigi::getKeyWG(), CSCALCTDigi::getQuality(), i, infoV, CSCALCTDigi::isValid(), LogTrace, and MAX_ALCT_BINS.

Referenced by lctSearch().

                                                                           {
   /* Selects two collision and two accelerator ALCTs per time bin with
      the best quality. */
   CSCALCTDigi bestALCTs[MAX_ALCT_BINS][2], secondALCTs[MAX_ALCT_BINS][2];
 
   if (infoV > 1) {
     LogTrace("CSCAnodeLCTProcessor") << all_alcts.size() <<
       " ALCTs at the input of best-track selector: ";
     for (std::vector <CSCALCTDigi>::const_iterator plct = all_alcts.begin();
          plct != all_alcts.end(); plct++) {
       if (!plct->isValid()) continue;
       LogTrace("CSCAnodeLCTProcessor") << (*plct);
     }
   }
 
   CSCALCTDigi tA[MAX_ALCT_BINS][2], tB[MAX_ALCT_BINS][2];
   for (std::vector <CSCALCTDigi>::const_iterator plct = all_alcts.begin();
        plct != all_alcts.end(); plct++) {
     if (!plct->isValid()) continue;
 
     // Select two collision and two accelerator ALCTs with the highest
     // quality at every bx.  The search for best ALCTs is done in parallel
     // for collision and accelerator patterns, and simultaneously for
     // two ALCTs, tA and tB.  If two or more ALCTs have equal qualities,
     // the priority is given to the ALCT with larger wiregroup number
     // in the search for tA (collision and accelerator), and to the ALCT
     // with smaller wiregroup number in the search for tB.
     int bx    = (*plct).getBX();
     int accel = (*plct).getAccelerator();
     int qual  = (*plct).getQuality();
     int wire  = (*plct).getKeyWG();
     bool vA = tA[bx][accel].isValid();
     bool vB = tB[bx][accel].isValid();
     int qA  = tA[bx][accel].getQuality();
     int qB  = tB[bx][accel].getQuality();
     int wA  = tA[bx][accel].getKeyWG();
     int wB  = tB[bx][accel].getKeyWG();
     if (!vA || qual > qA || (qual == qA && wire > wA)) {
       tA[bx][accel] = *plct;
     }
     if (!vB || qual > qB || (qual == qB && wire < wB)) {
       tB[bx][accel] = *plct;
     }
   }
 
   for (int bx = 0; bx < MAX_ALCT_BINS; bx++) {
     for (int accel = 0; accel <= 1; accel++) {
       // Best ALCT is always tA.
       if (tA[bx][accel].isValid()) {
         if (infoV > 2) {
           LogTrace("CSCAnodeLCTProcessor") << "tA: " << tA[bx][accel];
           LogTrace("CSCAnodeLCTProcessor") << "tB: " << tB[bx][accel];
         }
         bestALCTs[bx][accel] = tA[bx][accel];
 
         // If tA exists, tB exists too.
         if (tA[bx][accel] != tB[bx][accel] &&
             tA[bx][accel].getQuality() == tB[bx][accel].getQuality()) {
           secondALCTs[bx][accel] = tB[bx][accel];
         }
         else {
           // Funny part: if tA and tB are the same, or the quality of tB
           // is inferior to the quality of tA, the second best ALCT is
           // not tB.  Instead it is the largest-wiregroup ALCT among those
           // ALCT whose qualities are lower than the quality of the best one.
           for (std::vector <CSCALCTDigi>::const_iterator plct =
                  all_alcts.begin(); plct != all_alcts.end(); plct++) {
             if ((*plct).isValid() && 
                 (*plct).getAccelerator() == accel && (*plct).getBX() == bx &&
                 (*plct).getQuality() <  bestALCTs[bx][accel].getQuality() && 
                 (*plct).getQuality() >= secondALCTs[bx][accel].getQuality() &&
                 (*plct).getKeyWG()   >= secondALCTs[bx][accel].getKeyWG()) {
               secondALCTs[bx][accel] = *plct;
             }
           }
         }
       }
     }
   }
 
   // Fill the vector with up to four best ALCTs per bx and return it.
   std::vector<CSCALCTDigi> fourBest;
   for (int bx = 0; bx < MAX_ALCT_BINS; bx++) {
     for (int i = 0; i < 2; i++) {
       if (bestALCTs[bx][i].isValid())   fourBest.push_back(bestALCTs[bx][i]);
     }
     for (int i = 0; i < 2; i++) {
       if (secondALCTs[bx][i].isValid()) fourBest.push_back(secondALCTs[bx][i]);
     }
   }
 
   if (infoV > 1) {
     LogTrace("CSCAnodeLCTProcessor") << fourBest.size() << " ALCTs selected: ";
     for (std::vector<CSCALCTDigi>::const_iterator plct = fourBest.begin();
          plct != fourBest.end(); plct++) {
       LogTrace("CSCAnodeLCTProcessor") << (*plct);
     }
   }
 
   return fourBest;
 }

void CSCAnodeLCTProcessor::checkConfigParameters ( )

private

Make sure that the parameter values are within the allowed range.

Definition at line 375 of file CSCAnodeLCTProcessor.cc.

References accel_mode, def_accel_mode, def_drift_delay, def_fifo_pretrig, def_fifo_tbins, def_l1a_window_width, def_nplanes_hit_accel_pattern, def_nplanes_hit_accel_pretrig, def_nplanes_hit_pattern, def_nplanes_hit_pretrig, def_trig_mode, drift_delay, fifo_pretrig, fifo_tbins, infoV, l1a_window_width, MAX_ALCT_BINS, nplanes_hit_accel_pattern, nplanes_hit_accel_pretrig, nplanes_hit_pattern, nplanes_hit_pretrig, and trig_mode.

Referenced by CSCAnodeLCTProcessor(), and setConfigParameters().

                                                  {
   // Make sure that the parameter values are within the allowed range.
 
   // Max expected values.
   static const unsigned int max_fifo_tbins   = 1 << 5;
   static const unsigned int max_fifo_pretrig = 1 << 5;
   static const unsigned int max_drift_delay  = 1 << 2;
   static const unsigned int max_nplanes_hit_pretrig = 1 << 3;
   static const unsigned int max_nplanes_hit_pattern = 1 << 3;
   static const unsigned int max_nplanes_hit_accel_pretrig = 1 << 3;
   static const unsigned int max_nplanes_hit_accel_pattern = 1 << 3;
   static const unsigned int max_trig_mode        = 1 << 2;
   static const unsigned int max_accel_mode       = 1 << 2;
   static const unsigned int max_l1a_window_width = MAX_ALCT_BINS; // 4 bits
 
   // Checks.
   if (fifo_tbins >= max_fifo_tbins) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of fifo_tbins, " << fifo_tbins
       << ", exceeds max allowed, " << max_fifo_tbins-1 << " +++\n"
       << "+++ Try to proceed with the default value, fifo_tbins="
       << def_fifo_tbins << " +++\n";
     fifo_tbins = def_fifo_tbins;
   }
   if (fifo_pretrig >= max_fifo_pretrig) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of fifo_pretrig, " << fifo_pretrig
       << ", exceeds max allowed, " << max_fifo_pretrig-1 << " +++\n"
       << "+++ Try to proceed with the default value, fifo_pretrig="
       << def_fifo_pretrig << " +++\n";
     fifo_pretrig = def_fifo_pretrig;
   }
   if (drift_delay >= max_drift_delay) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of drift_delay, " << drift_delay
       << ", exceeds max allowed, " << max_drift_delay-1 << " +++\n"
       << "+++ Try to proceed with the default value, drift_delay="
       << def_drift_delay << " +++\n";
     drift_delay = def_drift_delay;
   }
   if (nplanes_hit_pretrig >= max_nplanes_hit_pretrig) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of nplanes_hit_pretrig, " << nplanes_hit_pretrig
       << ", exceeds max allowed, " << max_nplanes_hit_pretrig-1 << " +++\n"
       << "+++ Try to proceed with the default value, nplanes_hit_pretrig="
       << nplanes_hit_pretrig << " +++\n";
     nplanes_hit_pretrig = def_nplanes_hit_pretrig;
   }
   if (nplanes_hit_pattern >= max_nplanes_hit_pattern) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of nplanes_hit_pattern, " << nplanes_hit_pattern
       << ", exceeds max allowed, " << max_nplanes_hit_pattern-1 << " +++\n"
       << "+++ Try to proceed with the default value, nplanes_hit_pattern="
       << nplanes_hit_pattern << " +++\n";
     nplanes_hit_pattern = def_nplanes_hit_pattern;
   }
   if (nplanes_hit_accel_pretrig >= max_nplanes_hit_accel_pretrig) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of nplanes_hit_accel_pretrig, "
       << nplanes_hit_accel_pretrig << ", exceeds max allowed, "
       << max_nplanes_hit_accel_pretrig-1 << " +++\n"
       << "+++ Try to proceed with the default value, "
       << "nplanes_hit_accel_pretrig=" << nplanes_hit_accel_pretrig << " +++\n";
     nplanes_hit_accel_pretrig = def_nplanes_hit_accel_pretrig;
   }
   if (nplanes_hit_accel_pattern >= max_nplanes_hit_accel_pattern) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of nplanes_hit_accel_pattern, "
       << nplanes_hit_accel_pattern << ", exceeds max allowed, "
       << max_nplanes_hit_accel_pattern-1 << " +++\n"
       << "+++ Try to proceed with the default value, "
       << "nplanes_hit_accel_pattern=" << nplanes_hit_accel_pattern << " +++\n";
     nplanes_hit_accel_pattern = def_nplanes_hit_accel_pattern;
   }
   if (trig_mode >= max_trig_mode) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of trig_mode, " << trig_mode
       << ", exceeds max allowed, " << max_trig_mode-1 << " +++\n"
       << "+++ Try to proceed with the default value, trig_mode="
       << trig_mode << " +++\n";
     trig_mode = def_trig_mode;
   }
   if (accel_mode >= max_accel_mode) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of accel_mode, " << accel_mode
       << ", exceeds max allowed, " << max_accel_mode-1 << " +++\n"
       << "+++ Try to proceed with the default value, accel_mode="
       << accel_mode << " +++\n";
     accel_mode = def_accel_mode;
   }
   if (l1a_window_width >= max_l1a_window_width) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorConfigError")
       << "+++ Value of l1a_window_width, " << l1a_window_width
       << ", exceeds max allowed, " << max_l1a_window_width-1 << " +++\n"
       << "+++ Try to proceed with the default value, l1a_window_width="
       << l1a_window_width << " +++\n";
     l1a_window_width = def_l1a_window_width;
   }
 }

void CSCAnodeLCTProcessor::clear ( void )

Clears the LCT containers.

Definition at line 475 of file CSCAnodeLCTProcessor.cc.

References bestALCT, CSCALCTDigi::clear(), MAX_ALCT_BINS, and secondALCT.

Referenced by ghostCancellationLogic(), and ghostCancellationLogicSLHC().

                                  {
   for (int bx = 0; bx < MAX_ALCT_BINS; bx++) {
     bestALCT[bx].clear();
     secondALCT[bx].clear();
   }
 }

void CSCAnodeLCTProcessor::clear	(	const int	wire,
		const int	pattern
	)

private

Clears the quality for a given wire and pattern if it is a ghost.

Definition at line 482 of file CSCAnodeLCTProcessor.cc.

References quality.

                                                                   {
   /* Clear the data off of selected pattern */
   if (pattern == 0) quality[wire][0] = -999;
   else {
     quality[wire][1] = -999;
     quality[wire][2] = -999;
   }
 }

void CSCAnodeLCTProcessor::dumpConfigParams ( ) const

private

Dump ALCT configuration parameters.

Definition at line 1560 of file CSCAnodeLCTProcessor.cc.

References accel_mode, drift_delay, fifo_pretrig, fifo_tbins, l1a_window_width, LogDebug, nplanes_hit_accel_pattern, nplanes_hit_accel_pretrig, nplanes_hit_pattern, nplanes_hit_pretrig, and trig_mode.

Referenced by CSCAnodeLCTProcessor(), run(), and setConfigParameters().

                                                   {
   std::ostringstream strm;
   strm << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << "+                  ALCT configuration parameters:                  +\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   strm << " fifo_tbins   [total number of time bins in DAQ readout] = "
        << fifo_tbins << "\n";
   strm << " fifo_pretrig [start time of anode raw hits in DAQ readout] = "
        << fifo_pretrig << "\n";
   strm << " drift_delay  [drift delay after pre-trigger, in 25 ns bins] = "
        << drift_delay << "\n";
   strm << " nplanes_hit_pretrig [min. number of layers hit for pre-trigger] = "
        << nplanes_hit_pretrig << "\n";
   strm << " nplanes_hit_pattern [min. number of layers hit for trigger] = "
        << nplanes_hit_pattern << "\n";
   strm << " nplanes_hit_accel_pretrig [min. number of layers hit for accel."
        << " pre-trig.] = " << nplanes_hit_accel_pretrig << "\n";
   strm << " nplanes_hit_accel_pattern [min. number of layers hit for accel."
        << " trigger] = "   << nplanes_hit_accel_pattern << "\n";
   strm << " trig_mode  [enabling/disabling collision/accelerator tracks] = "
        << trig_mode << "\n";
   strm << " accel_mode [preference to collision/accelerator tracks] = "
        << accel_mode << "\n";
   strm << " l1a_window_width [L1Accept window width, in 25 ns bins] = "
        << l1a_window_width << "\n";
   strm << "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n";
   LogDebug("CSCAnodeLCTProcessor") << strm.str();
   //std::cout<<strm.str()<<std::endl;
 }

void CSCAnodeLCTProcessor::dumpDigis ( const std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES] ) const

private

Dump digis on wire groups.

Definition at line 1592 of file CSCAnodeLCTProcessor.cc.

References TauDecayModes::dec, LogDebug, LogTrace, CSCConstants::NUM_LAYERS, numWireGroups, findQualityFiles::size, theChamber, theEndcap, theRing, and theStation.

Referenced by pulseExtension().

                                                                                                                        {
   LogDebug("CSCAnodeLCTProcessor")
     << "ME" << ((theEndcap == 1) ? "+" : "-")
     << theStation << "/" << theRing << "/" << theChamber
     << " nWiregroups " << numWireGroups;
 
   std::ostringstream strstrm;
   for (int i_wire = 0; i_wire < numWireGroups; i_wire++) {
     if (i_wire%10 == 0) {
       if (i_wire < 100) strstrm << i_wire/10;
       else              strstrm << (i_wire-100)/10;
     }
     else                strstrm << " ";
   }
   strstrm << "\n";
   for (int i_wire = 0; i_wire < numWireGroups; i_wire++) {
     strstrm << i_wire%10;
   }
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     strstrm << "\n";
     for (int i_wire = 0; i_wire < numWireGroups; i_wire++) {
       if (wire[i_layer][i_wire].size() > 0) {
         std::vector<int> bx_times = wire[i_layer][i_wire];
         strstrm << std::hex << bx_times[0] << std::dec;
       }
       else {
         strstrm << ".";
       }
     }
   }
   LogTrace("CSCAnodeLCTProcessor") << strstrm.str();
 }

std::vector< CSCALCTDigi > CSCAnodeLCTProcessor::getALCTs ( )

Returns vector of all found ALCTs, if any.

Definition at line 1693 of file CSCAnodeLCTProcessor.cc.

References bestALCT, MAX_ALCT_BINS, and secondALCT.

Referenced by readoutALCTs(), and run().

                                                       {
   std::vector<CSCALCTDigi> tmpV;
   for (int bx = 0; bx < MAX_ALCT_BINS; bx++) {
     if (bestALCT[bx].isValid())   tmpV.push_back(bestALCT[bx]);
     if (secondALCT[bx].isValid()) tmpV.push_back(secondALCT[bx]);
   }
   return tmpV;
 }

bool CSCAnodeLCTProcessor::getDigis ( const CSCWireDigiCollection * wiredc )

Access routines to wire digis.

Definition at line 633 of file CSCAnodeLCTProcessor.cc.

References begin, digiV, disableME1a, relativeConstraints::empty, infoV, isME11, LogTrace, CSCConstants::NUM_LAYERS, theChamber, theEndcap, theRing, theSector, theStation, theSubsector, and theTrigChamber.

Referenced by run().

                                                                        {
   // Routine for getting digis and filling digiV vector.
   bool noDigis = true;
 
   // Loop over layers and save wire digis on each one into digiV[layer].
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     digiV[i_layer].clear();
 
     CSCDetId detid(theEndcap, theStation, theRing, theChamber, i_layer+1);
     getDigis(wiredc, detid);
 
     // If this is ME1/1, fetch digis in corresponding ME1/A (ring=4) as well.
     if (isME11 && !disableME1a) {
       CSCDetId detid_me1a(theEndcap, theStation, 4, theChamber, i_layer+1);
       getDigis(wiredc, detid_me1a);
     }
 
     if (!digiV[i_layer].empty()) {
       noDigis = false;
       if (infoV > 1) {
         LogTrace("CSCAnodeLCTProcessor")
           << "found " << digiV[i_layer].size()
           << " wire digi(s) in layer " << i_layer << " of ME"
           << ((theEndcap == 1) ? "+" : "-") << theStation << "/" << theRing
           << "/" << theChamber << " (trig. sector " << theSector
           << " subsector " << theSubsector << " id " << theTrigChamber << ")";
         for (std::vector<CSCWireDigi>::iterator pld = digiV[i_layer].begin();
              pld != digiV[i_layer].end(); pld++) {
           LogTrace("CSCAnodeLCTProcessor") << "   " << (*pld);
         }
       }
     }
   }
 
   return noDigis;
 }

void CSCAnodeLCTProcessor::getDigis	(	const CSCWireDigiCollection *	wiredc,
		const CSCDetId &	id
	)

Definition at line 670 of file CSCAnodeLCTProcessor.cc.

References digiV.

                                                         {
   const CSCWireDigiCollection::Range rwired = wiredc->get(id);
   for (CSCWireDigiCollection::const_iterator digiIt = rwired.first;
        digiIt != rwired.second; ++digiIt) {
     digiV[id.layer()-1].push_back(*digiIt);
   }
 }

void CSCAnodeLCTProcessor::ghostCancellationLogic ( )

private

Definition at line 1015 of file CSCAnodeLCTProcessor.cc.

References clear(), dt, first_bx, ghost_cancellation_bx_depth, ghost_cancellation_side_quality, infoV, LogTrace, CSCConstants::MAX_NUM_WIRES, numWireGroups, and quality.

Referenced by run().

                                                   {
   /* This function looks for LCTs on the previous and next wires.  If one
      exists and it has a better quality and a bx_time up to 4 clocks earlier
      than the present, then the present LCT is cancelled.  The present LCT
      also gets cancelled if it has the same quality as the one on the
      previous wire (this has not been done in 2003 test beam).  The
      cancellation is done separately for collision and accelerator patterns. */
 
   int ghost_cleared[CSCConstants::MAX_NUM_WIRES][2];
 
   for (int key_wire = 0; key_wire < numWireGroups; key_wire++) {
     for (int i_pattern = 0; i_pattern < 2; i_pattern++) {
       ghost_cleared[key_wire][i_pattern] = 0;
 
       // Non-empty wire group.
       int qual_this = quality[key_wire][i_pattern];
       if (qual_this > 0) {
 
         // Previous wire.
         int qual_prev = (key_wire > 0) ? quality[key_wire-1][i_pattern] : 0;
         if (qual_prev > 0) {
           int dt = first_bx[key_wire] - first_bx[key_wire-1];
           // Cancel this wire
           //   1) If the candidate at the previous wire is at the same bx
           //      clock and has better quality (or equal quality - this has
           //      been implemented only in 2004).
           //   2) If the candidate at the previous wire is up to 4 clocks
           //      earlier, regardless of quality.
           if (dt == 0) {
             if (qual_prev >= qual_this) ghost_cleared[key_wire][i_pattern] = 1;
           }
           else if (dt > 0 && dt <= ghost_cancellation_bx_depth ) {
             // Next "if" check accounts for firmware bug and should be
             // removed once the next firmware version is used.
             // The bug is fixed in 5/5/2008 version of ALCT firmware,
             // which is used in all chambers starting with 26/05/2008.
             if ((!ghost_cancellation_side_quality) ||
                 (qual_prev > qual_this) )
               ghost_cleared[key_wire][i_pattern] = 1;
           }
         }
 
         // Next wire.
         // Skip this step if this wire is already declared "ghost".
         if (ghost_cleared[key_wire][i_pattern] == 1) {
           if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
             << ((i_pattern == 0) ? "Accelerator" : "Collision")
             << " pattern ghost cancelled on key_wire " << key_wire <<" q="<<qual_this
             << "  by wire " << key_wire-1<<" q="<<qual_prev;
           continue;
         }
 
         int qual_next =
           (key_wire < numWireGroups-1) ? quality[key_wire+1][i_pattern] : 0;
         if (qual_next > 0) {
           int dt = first_bx[key_wire] - first_bx[key_wire+1];
           // Same cancellation logic as for the previous wire.
           if (dt == 0) {
             if (qual_next > qual_this) ghost_cleared[key_wire][i_pattern] = 1;
           }
           else if (dt > 0 && dt <= ghost_cancellation_bx_depth ) {
             // Next "if" check accounts for firmware bug and should be
             // removed once the next firmware version is used.
             // The bug is fixed in 5/5/2008 version of ALCT firmware,
             // which is used in all chambers starting with 26/05/2008.
             if ((!ghost_cancellation_side_quality) ||
                 (qual_next >= qual_this) )
               ghost_cleared[key_wire][i_pattern] = 1;
           }
         }
         if (ghost_cleared[key_wire][i_pattern] == 1) {
           if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
             << ((i_pattern == 0) ? "Accelerator" : "Collision")
             << " pattern ghost cancelled on key_wire " << key_wire <<" q="<<qual_this
             << "  by wire " << key_wire+1<<" q="<<qual_next;
           continue;
         }
       }
     }
   }
 
   // All cancellation is done in parallel, so wiregroups do not know what
   // their neighbors are cancelling.
   for (int key_wire = 0; key_wire < numWireGroups; key_wire++) {
     for (int i_pattern = 0; i_pattern < 2; i_pattern++) {
       if (ghost_cleared[key_wire][i_pattern] > 0) {
         clear(key_wire, i_pattern);
       }
     }
   }
 }

void CSCAnodeLCTProcessor::ghostCancellationLogicSLHC ( )

private

Definition at line 1110 of file CSCAnodeLCTProcessor.cc.

References clear(), dt, first_bx, first_bx_corrected, ghost_cancellation_bx_depth, ghost_cancellation_side_quality, infoV, LogTrace, CSCConstants::MAX_NUM_WIRES, numWireGroups, or, quality, runME21ILT_, runME3141ILT_, and use_corrected_bx.

Referenced by run().

                                                       {
   /* This function looks for LCTs on the previous and next wires.  If one
      exists and it has a better quality and a bx_time up to
      ghost_cancellation_bx_depth clocks earlier than the present,
      then the present LCT is cancelled.  The present LCT
      also gets cancelled if it has the same quality as the one on the
      previous wire (this has not been done in 2003 test beam).  The
      cancellation is done separately for collision and accelerator patterns. */
 
   int ghost_cleared[CSCConstants::MAX_NUM_WIRES][2];
 
   for (int key_wire = 0; key_wire < numWireGroups; key_wire++) {
     for (int i_pattern = 0; i_pattern < 2; i_pattern++) {
       ghost_cleared[key_wire][i_pattern] = 0;
 
       // Non-empty wire group.
       int qual_this = quality[key_wire][i_pattern];
       if (qual_this > 0) {
 
     if (runME21ILT_ or runME3141ILT_) qual_this = (qual_this & 0x03); 
         // Previous wire.
         int dt = -1;
         int qual_prev = (key_wire > 0) ? quality[key_wire-1][i_pattern] : 0;
         if (qual_prev > 0) {
           if (use_corrected_bx)
             dt = first_bx_corrected[key_wire] - first_bx_corrected[key_wire-1];
           else
             dt = first_bx[key_wire] - first_bx[key_wire-1];
           // hack to run the Phase-II ME2/1, ME3/1 and ME4/1 ILT
           if (runME21ILT_ or runME3141ILT_) qual_prev = (qual_prev & 0x03); 
 
           // Cancel this wire
           //   1) If the candidate at the previous wire is at the same bx
           //      clock and has better quality (or equal? quality - this has
           //      been implemented only in 2004).
           //   2) If the candidate at the previous wire is up to 4 clocks
           //      earlier, regardless of quality.
           if (dt == 0) {
             if (qual_prev > qual_this) ghost_cleared[key_wire][i_pattern] = 1;
           }
           else if (dt > 0 && dt <= ghost_cancellation_bx_depth ) {
             // Next "if" check accounts for firmware bug and should be
             // removed once the next firmware version is used.
             // The bug is fixed in 5/5/2008 version of ALCT firmware,
             // which is used in all chambers starting with 26/05/2008.
             if ((!ghost_cancellation_side_quality) ||
                 (qual_prev > qual_this) )
               ghost_cleared[key_wire][i_pattern] = 1;
           }
         }
 
         // Next wire.
         // Skip this step if this wire is already declared "ghost".
         if (ghost_cleared[key_wire][i_pattern] == 1) {
           if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
             << ((i_pattern == 0) ? "Accelerator" : "Collision")
             << " pattern ghost cancelled on key_wire " << key_wire <<" q="<<qual_this
             << "  by wire " << key_wire-1<<" q="<<qual_prev<<"  dt="<<dt;
           continue;
         }
 
         dt = -1;
         int qual_next =
           (key_wire < numWireGroups-1) ? quality[key_wire+1][i_pattern] : 0;
         if (qual_next > 0) {
           if (use_corrected_bx)
             dt = first_bx_corrected[key_wire] - first_bx_corrected[key_wire+1];
           else
             dt = first_bx[key_wire] - first_bx[key_wire+1];
           // hack to run the Phase-II ME2/1, ME3/1 and ME4/1 ILT
           if (runME21ILT_ or runME3141ILT_)
             qual_next = (qual_next & 0x03);
           // Same cancellation logic as for the previous wire.
           if (dt == 0) {
             if (qual_next >= qual_this) ghost_cleared[key_wire][i_pattern] = 1;
           }
           else if (dt > 0 && dt <= ghost_cancellation_bx_depth ) {
             // Next "if" check accounts for firmware bug and should be
             // removed once the next firmware version is used.
             // The bug is fixed in 5/5/2008 version of ALCT firmware,
             // which is used in all chambers starting with 26/05/2008.
             if ((!ghost_cancellation_side_quality) ||
                 (qual_next >= qual_this) )
               ghost_cleared[key_wire][i_pattern] = 1;
           }
         }
         if (ghost_cleared[key_wire][i_pattern] == 1) {
           if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
             << ((i_pattern == 0) ? "Accelerator" : "Collision")
             << " pattern ghost cancelled on key_wire " << key_wire <<" q="<<qual_this
             << "  by wire " << key_wire+1<<" q="<<qual_next<<"  dt="<<dt;
           continue;
         }
       }
     }
   }
 
   // All cancellation is done in parallel, so wiregroups do not know what
   // their neighbors are cancelling.
   for (int key_wire = 0; key_wire < numWireGroups; key_wire++) {
     for (int i_pattern = 0; i_pattern < 2; i_pattern++) {
       if (ghost_cleared[key_wire][i_pattern] > 0) {
         clear(key_wire, i_pattern);
       }
     }
   }
 }

bool CSCAnodeLCTProcessor::isBetterALCT	(	const CSCALCTDigi &	lhsALCT,
		const CSCALCTDigi &	rhsALCT
	)

private

Definition at line 1449 of file CSCAnodeLCTProcessor.cc.

References CSCALCTDigi::getAccelerator(), CSCALCTDigi::getBX(), CSCALCTDigi::getKeyWG(), CSCALCTDigi::getQuality(), CSCALCTDigi::isValid(), and quality.

Referenced by lctSearch().

                                                                     {
   /* This method should have been an overloaded > operator, but we
      have to keep it here since need to check values in quality[][]
      array modified according to accel_mode parameter. */
   bool returnValue = false;
 
   if (lhsALCT.isValid() && !rhsALCT.isValid()) {return true;}
 
   // ALCTs found at earlier bx times are ranked higher than ALCTs found at
   // later bx times regardless of the quality.
   if (lhsALCT.getBX()  < rhsALCT.getBX()) {returnValue = true;}
   if (lhsALCT.getBX() != rhsALCT.getBX()) {return returnValue;}
 
   // First check the quality of ALCTs.
   int qual1 = lhsALCT.getQuality();
   int qual2 = rhsALCT.getQuality();
   if (qual1 >  qual2) {returnValue = true;}
   // If qualities are the same, check accelerator bits of both ALCTs.
   // If they are not the same, rank according to accel_mode value.
   // If they are the same, keep the track selector assignment.
   else if (qual1 == qual2 && 
            lhsALCT.getAccelerator() != rhsALCT.getAccelerator() &&
            quality[lhsALCT.getKeyWG()][1-lhsALCT.getAccelerator()] >
            quality[rhsALCT.getKeyWG()][1-rhsALCT.getAccelerator()])
     {returnValue = true;}
 
   return returnValue;
 }

void CSCAnodeLCTProcessor::lctSearch ( )

private

Definition at line 1221 of file CSCAnodeLCTProcessor.cc.

References accelMode(), bestALCT, bestTrackSelector(), CSCALCTDigi::clear(), first_bx, first_bx_corrected, CSCALCTDigi::getFullBX(), infoV, isBetterALCT(), isTMB07, LogDebug, LogTrace, MAX_ALCT_BINS, numWireGroups, quality, secondALCT, CSCALCTDigi::setFullBX(), CSCALCTDigi::setTrknmb(), theChamber, theEndcap, theRing, theSector, theStation, theSubsector, theTrigChamber, trigMode(), and use_corrected_bx.

Referenced by run().

                                      {
   // First modify the quality according accel_mode, then store all
   // of the valid LCTs in an array.
   std::vector<CSCALCTDigi> lct_list;
 
   for (int i_wire = 0; i_wire < numWireGroups; i_wire++) {
     // If there is either accelerator or collision, perform trigMode
     // function before storing and sorting.
     if (quality[i_wire][0] > 0 || quality[i_wire][1] > 0) {
       trigMode(i_wire);
 
       int bx  = first_bx[i_wire];
       int fbx = first_bx_corrected[i_wire];
       if (infoV>1) LogTrace("CSCAnodeLCTProcessor")<<" bx="<<bx<<" fbx="<<fbx;
       if (use_corrected_bx) {
         bx  = fbx;
         fbx = first_bx[i_wire];
       }
       if (infoV>1) LogTrace("CSCAnodeLCTProcessor")<<" bx="<<bx<<" fbx="<<fbx;
       // Store any valid accelerator pattern LCTs.
       if (quality[i_wire][0] > 0) {
         int qual = (quality[i_wire][0] & 0x03); // 2 LSBs
         CSCALCTDigi lct_info(1, qual, 1, 0, i_wire, bx);
         lct_info.setFullBX(fbx);
         lct_list.push_back(lct_info);
       }
 
       // Store any valid collision pattern LCTs.
       if (quality[i_wire][1] > 0) {
         int qual = (quality[i_wire][1] & 0x03); // 2 LSBs
         CSCALCTDigi lct_info(1, qual, 0, quality[i_wire][2], i_wire, bx);
         //lct_info.setFullBX(fbx); // uncomment if one wants, e.g., to keep corrected time here
         lct_list.push_back(lct_info);
         if (infoV>1) LogTrace("CSCAnodeLCTProcessor")<<" got lct_info: "<<lct_info;
       }
 
       // Modify qualities according to accel_mode parameter.
       accelMode(i_wire);
     }
   }
 
   // Best track selector selects two collision and two accelerator ALCTs
   // with the best quality per time bin.
   std::vector<CSCALCTDigi> fourBest = bestTrackSelector(lct_list);
 
   if (infoV > 0) {
     int n_alct_all=0, n_alct=0;
     for (std::vector <CSCALCTDigi>::const_iterator plct = lct_list.begin(); plct != lct_list.end(); plct++)
       if (plct->isValid() && plct->getBX()==6) n_alct_all++;
     for (std::vector <CSCALCTDigi>::const_iterator plct = fourBest.begin(); plct != fourBest.end(); plct++)
       if (plct->isValid() && plct->getBX()==6) n_alct++;
 
     LogTrace("CSCAnodeLCTProcessor")<<"alct_count E:"<<theEndcap<<"S:"<<theStation<<"R:"<<theRing<<"C:"<<theChamber
       <<"  all "<<n_alct_all<<"  found "<<n_alct;
   }
   
   // Select two best of four per time bin, based on quality and
   // accel_mode parameter.
   for (std::vector<CSCALCTDigi>::const_iterator plct = fourBest.begin();
        plct != fourBest.end(); plct++) {
 
     int bx = plct->getBX();
     if (bx >= MAX_ALCT_BINS) {
       if (infoV > 0) edm::LogWarning("L1CSCTPEmulatorOutOfTimeALCT")
         << "+++ Bx of ALCT candidate, " << bx << ", exceeds max allowed, "
         << MAX_ALCT_BINS-1 << "; skipping it... +++\n";
       continue;
     }
 
     if (isBetterALCT(*plct, bestALCT[bx])) {
       if (isBetterALCT(bestALCT[bx], secondALCT[bx])) {
         secondALCT[bx] = bestALCT[bx];
       }
       bestALCT[bx] = *plct;
     }
     else if (isBetterALCT(*plct, secondALCT[bx])) {
       secondALCT[bx] = *plct;
     }
   }
 
   if (!isTMB07) {
     // Prior to DAQ-2006 format, only ALCTs at the earliest bx were reported.
     int first_bx = MAX_ALCT_BINS;
     for (int bx = 0; bx < MAX_ALCT_BINS; bx++) {
       if (bestALCT[bx].isValid()) {
         first_bx = bx;
         break;
       }
     }
     if (first_bx < MAX_ALCT_BINS) {
       for (int bx = first_bx + 1; bx < MAX_ALCT_BINS; bx++) {
         if (bestALCT[bx].isValid())   bestALCT[bx].clear();
         if (secondALCT[bx].isValid()) secondALCT[bx].clear();
       }
     }
   }
 
   for (int bx = 0; bx < MAX_ALCT_BINS; bx++) {
     if (bestALCT[bx].isValid()) {
       bestALCT[bx].setTrknmb(1);
       if (infoV > 0) {
         LogDebug("CSCAnodeLCTProcessor")
           << "\n" << bestALCT[bx] << " fullBX = "<<bestALCT[bx].getFullBX()
           << " found in ME"
           << ((theEndcap == 1) ? "+" : "-")
           << theStation << "/" << theRing << "/" << theChamber
           << " (sector " << theSector << " subsector " << theSubsector
           << " trig id. " << theTrigChamber << ")" << "\n";
       }
       if (secondALCT[bx].isValid()) {
         secondALCT[bx].setTrknmb(2);
         if (infoV > 0) {
           LogDebug("CSCAnodeLCTProcessor")
             << secondALCT[bx] << " fullBX = "<<secondALCT[bx].getFullBX()
             << " found in ME"
             << ((theEndcap == 1) ? "+" : "-")
             << theStation << "/" << theRing << "/" << theChamber
             << " (sector " << theSector << " subsector " << theSubsector
             << " trig id. " << theTrigChamber << ")" << "\n";
         }
       }
     }
   }
 }

void CSCAnodeLCTProcessor::loadPatternMask ( )

private

Load pattern mask defined by configuration into pattern_mask

Definition at line 320 of file CSCAnodeLCTProcessor.cc.

References isMTCC, isTMB07, narrow_mask_r1, CSCConstants::NUM_ALCT_PATTERNS, NUM_PATTERN_WIRES, pattern_mask, pattern_mask_open, pattern_mask_r1, pattern_mask_slim, and theRing.

Referenced by CSCAnodeLCTProcessor().

                                            {
   // Load appropriate pattern mask.
   for (int i_patt = 0; i_patt < CSCConstants::NUM_ALCT_PATTERNS; i_patt++) {
     for (int i_wire = 0; i_wire < NUM_PATTERN_WIRES; i_wire++) {
       if (isMTCC || isTMB07) {
         pattern_mask[i_patt][i_wire] = pattern_mask_open[i_patt][i_wire];
         if (narrow_mask_r1 && (theRing == 1 || theRing == 4))
           pattern_mask[i_patt][i_wire] = pattern_mask_r1[i_patt][i_wire];
       }
       else {
         pattern_mask[i_patt][i_wire] = pattern_mask_slim[i_patt][i_wire];
       }
     }
   }
 }

bool CSCAnodeLCTProcessor::patternDetection ( const int key_wire )

private

Definition at line 871 of file CSCAnodeLCTProcessor.cc.

References funct::abs(), drift_delay, first_bx, first_bx_corrected, hit_persist, infoV, isTMB07, LogTrace, MESelection, nplanes_hit_accel_pattern, nplanes_hit_pattern, CSCConstants::NUM_ALCT_PATTERNS, CSCConstants::NUM_LAYERS, NUM_PATTERN_WIRES, numWireGroups, or, pattern_envelope, pattern_mask, pulse, class-composition::Q, quality, runME21ILT_, runME3141ILT_, and AlCaHLTBitMon_QueryRunRegistry::string.

Referenced by run().

                                                               {
   /* See if there is a pattern that satisfies nplanes_hit_pattern number of
      layers hit for either the accelerator or collision patterns.  Use
      the pattern with the best quality. */
 
   bool trigger = false;
   bool hit_layer[CSCConstants::NUM_LAYERS];
   unsigned int temp_quality;
   int this_layer, this_wire, delta_wire;
   // If nplanes_hit_accel_pattern is 0, the firmware uses the value
   // of nplanes_hit_pattern instead.
   const unsigned int nplanes_hit_pattern_acc =
     (nplanes_hit_accel_pattern != 0) ? nplanes_hit_accel_pattern :
     nplanes_hit_pattern;
   const unsigned int pattern_thresh[CSCConstants::NUM_ALCT_PATTERNS] = {
     nplanes_hit_pattern_acc, nplanes_hit_pattern, nplanes_hit_pattern
   };
   const std::string ptn_label[] = {"Accelerator", "CollisionA", "CollisionB"};
 
   for (int i_pattern = 0; i_pattern < CSCConstants::NUM_ALCT_PATTERNS; i_pattern++){
     temp_quality = 0;
     for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
       hit_layer[i_layer] = false;
 
     double num_pattern_hits=0., times_sum=0.;
     std::multiset<int> mset_for_median;
     mset_for_median.clear();
 
     for (int i_wire = 0; i_wire < NUM_PATTERN_WIRES; i_wire++){
       if (pattern_mask[i_pattern][i_wire] != 0){
         this_layer = pattern_envelope[0][i_wire];
         delta_wire = pattern_envelope[1+MESelection][i_wire];
         this_wire  = delta_wire + key_wire;
         if ((this_wire >= 0) && (this_wire < numWireGroups)){
 
           // Wait a drift_delay time later and look for layers hit in
           // the pattern.
           if ( ( (pulse[this_layer][this_wire] >> 
                  (first_bx[key_wire] + drift_delay)) & 1) == 1) {
 
             // If layer has never had a hit before, then increment number
             // of layer hits.
             if (hit_layer[this_layer] == false){
               temp_quality++;
               // keep track of which layers already had hits.
               hit_layer[this_layer] = true;
               if (infoV > 1)
                 LogTrace("CSCAnodeLCTProcessor")
                   << "bx_time: " << first_bx[key_wire]
                   << " pattern: " << i_pattern << " keywire: " << key_wire
                   << " layer: "     << this_layer
                   << " quality: "   << temp_quality;
             }
             
             // for averaged time use only the closest WGs around the key WG
             if (abs(delta_wire)<2) {
               // find at what bx did pulse on this wire&layer start
               // use hit_pesrist constraint on how far back we can go
               int first_bx_layer = first_bx[key_wire] + drift_delay;
               for (unsigned int dbx=0; dbx<hit_persist; dbx++) {
                 if (((pulse[this_layer][this_wire] >> (first_bx_layer-1)) & 1) == 1) first_bx_layer--;
                 else break;
               }
               times_sum += (double)first_bx_layer;
               num_pattern_hits += 1.;
               mset_for_median.insert(first_bx_layer);
               if (infoV > 2) 
                 LogTrace("CSCAnodeLCTProcessor")
                   <<" 1st bx in layer: "<<first_bx_layer
                   <<" sum bx: "<<times_sum
                   <<" #pat. hits: "<<num_pattern_hits;
             }
           }
         }
       }
     }
 
     // calculate median
     const int sz = mset_for_median.size();
     if (sz > 0) {
       std::multiset<int>::iterator im = mset_for_median.begin();
       if (sz > 1) std::advance(im,sz/2-1);
       if (sz == 1) first_bx_corrected[key_wire] = *im;
       else if ((sz % 2) == 1) first_bx_corrected[key_wire] = *(++im);
       else first_bx_corrected[key_wire] = ((*im) + (*(++im)))/2;
     
       if (infoV > 1) {
         char bxs[300]="";
         for (im = mset_for_median.begin(); im != mset_for_median.end(); im++) 
           sprintf(bxs,"%s %d", bxs, *im);
         LogTrace("CSCAnodeLCTProcessor")
           <<"bx="<<first_bx[key_wire]<<" bx_cor="<< first_bx_corrected[key_wire]<<"  bxset="<<bxs;
       }
     }
 
     if (temp_quality >= pattern_thresh[i_pattern]) {
       trigger = true;
 
       if (!isTMB07) {
         // Quality reported by the pattern detector is defined as the number
         // of the layers hit in a pattern minus (pattern_thresh-1) value.
         temp_quality -= (pattern_thresh[i_pattern]-1);
       }
       else {
         // Quality definition changed on 22 June 2007: it no longer depends
         // on pattern_thresh.
         int Q;
         // hack to run the Phase-II ME2/1, ME3/1 and ME4/1 ILT
         if (temp_quality == 3 and (runME21ILT_ or runME3141ILT_)) Q = 4;
         else if (temp_quality > 3) Q = temp_quality - 3;
         else                  Q = 0; // quality code 0 is valid!
         temp_quality = Q;
       }
 
       if (i_pattern == 0) {
         // Accelerator pattern
         quality[key_wire][0] = temp_quality;
       }
       else {
         // Only one collision pattern (of the best quality) is reported
         if (static_cast<int>(temp_quality) > quality[key_wire][1]) {
           quality[key_wire][1] = temp_quality;
           quality[key_wire][2] = i_pattern-1;
         }
       }
       if (infoV > 1) {
         LogTrace("CSCAnodeLCTProcessor")
           << "Pattern found; keywire: "  << key_wire
           << " type: " << ptn_label[i_pattern]
           << " quality: " << temp_quality << "\n";
       }
     }
   }
   if (infoV > 1 && quality[key_wire][1] > 0) {
     if (quality[key_wire][2] == 0)
       LogTrace("CSCAnodeLCTProcessor")
         << "Collision Pattern A is chosen" << "\n";
     else if (quality[key_wire][2] == 1)
       LogTrace("CSCAnodeLCTProcessor")
         << "Collision Pattern B is chosen" << "\n";
   }
   return trigger;
 }

bool CSCAnodeLCTProcessor::preTrigger	(	const int	key_wire,
		const int	start_bx
	)

private

Definition at line 808 of file CSCAnodeLCTProcessor.cc.

References drift_delay, fifo_tbins, first_bx, infoV, LogTrace, MESelection, nplanes_hit_accel_pretrig, nplanes_hit_pretrig, CSCConstants::NUM_ALCT_PATTERNS, CSCConstants::NUM_LAYERS, NUM_PATTERN_WIRES, numWireGroups, pattern_envelope, pattern_mask, and pulse.

Referenced by run().

                                                                             {
   /* Check that there are nplanes_hit_pretrig or more layers hit in collision
      or accelerator patterns for a particular key_wire.  If so, return
      true and the PatternDetection process will start. */
 
   unsigned int layers_hit;
   bool hit_layer[CSCConstants::NUM_LAYERS];
   int this_layer, this_wire;
   // If nplanes_hit_accel_pretrig is 0, the firmware uses the value
   // of nplanes_hit_pretrig instead.
   const unsigned int nplanes_hit_pretrig_acc =
     (nplanes_hit_accel_pretrig != 0) ? nplanes_hit_accel_pretrig :
     nplanes_hit_pretrig;
   const unsigned int pretrig_thresh[CSCConstants::NUM_ALCT_PATTERNS] = {
     nplanes_hit_pretrig_acc, nplanes_hit_pretrig, nplanes_hit_pretrig
   };
 
   // Loop over bx times, accelerator and collision patterns to 
   // look for pretrigger.
   // Stop drift_delay bx's short of fifo_tbins since at later bx's we will
   // not have a full set of hits to start pattern search anyway.
   unsigned int stop_bx = fifo_tbins - drift_delay;
   for (unsigned int bx_time = start_bx; bx_time < stop_bx; bx_time++) {
     for (int i_pattern = 0; i_pattern < CSCConstants::NUM_ALCT_PATTERNS; i_pattern++) {
       for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++)
         hit_layer[i_layer] = false;
       layers_hit = 0;
 
       for (int i_wire = 0; i_wire < NUM_PATTERN_WIRES; i_wire++){
         if (pattern_mask[i_pattern][i_wire] != 0){
           this_layer = pattern_envelope[0][i_wire];
           this_wire  = pattern_envelope[1+MESelection][i_wire]+key_wire;
           if ((this_wire >= 0) && (this_wire < numWireGroups)){
             // Perform bit operation to see if pulse is 1 at a certain bx_time.
             if (((pulse[this_layer][this_wire] >> bx_time) & 1) == 1) {
               // Store number of layers hit.
               if (hit_layer[this_layer] == false){
                 hit_layer[this_layer] = true;
                 layers_hit++;
               }
 
               // See if number of layers hit is greater than or equal to
               // pretrig_thresh.
               if (layers_hit >= pretrig_thresh[i_pattern]) {
                 first_bx[key_wire] = bx_time;
                 if (infoV > 1) {
                   LogTrace("CSCAnodeLCTProcessor")
                     << "Pretrigger was satisfied for wire: " << key_wire
                     << " pattern: " << i_pattern
                     << " bx_time: " << bx_time;
                 }
                 return true;
               }
             }
           }
         }
       }
     }
   }
   // If the pretrigger was never satisfied, then return false.
   return false;
 }

bool CSCAnodeLCTProcessor::pulseExtension ( const std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES] )

private

Definition at line 738 of file CSCAnodeLCTProcessor.cc.

References dumpDigis(), first_bx, first_bx_corrected, hit_persist, i, infoV, j, LogTrace, CSCConstants::NUM_LAYERS, numWireGroups, pulse, quality, and findQualityFiles::size.

Referenced by run().

                                                                                                                      {
   /* A pulse array will be used as a bit representation of hit times.
      For example: if a keywire has a bx_time of 3, then 1 shifted
      left 3 will be bit pattern 0000000000001000.  Bits are then added to
      signify the duration of a signal (hit_persist, formerly bx_width).  So
      for the pulse with a hit_persist of 6 will look like 0000000111111000. */
 
   bool chamber_empty = true;
   int i_wire, i_layer, digi_num;
   static unsigned int bits_in_pulse = 8*sizeof(pulse[0][0]);
 
   for (i_wire = 0; i_wire < numWireGroups; i_wire++) {
     for (i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
       pulse[i_layer][i_wire] = 0;
     }
     first_bx[i_wire] = -999;
     first_bx_corrected[i_wire] = -999;
     for (int j = 0; j < 3; j++) quality[i_wire][j] = -999;
   }
 
   for (i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++){
     digi_num = 0;
     for (i_wire = 0; i_wire < numWireGroups; i_wire++) {
       if (wire[i_layer][i_wire].size() > 0) {
         std::vector<int> bx_times = wire[i_layer][i_wire];
         for (unsigned int i = 0; i < bx_times.size(); i++) {
           // Check that min and max times are within the allowed range.
           if (bx_times[i] < 0 || bx_times[i] + hit_persist >= bits_in_pulse) {
             if (infoV > 0) edm::LogWarning("L1CSCTPEmulatorOutOfTimeDigi")
               << "+++ BX time of wire digi (wire = " << i_wire
               << " layer = " << i_layer << ") bx = " << bx_times[i]
               << " is not within the range (0-" << bits_in_pulse
               << "] allowed for pulse extension.  Skip this digi! +++\n";
             continue;
           }
 
           // Found at least one in-time digi; set chamber_empty to false
           if (chamber_empty) chamber_empty = false;
 
           // make the pulse
           for (unsigned int bx = bx_times[i];
                bx < (bx_times[i] + hit_persist); bx++)
           pulse[i_layer][i_wire] = pulse[i_layer][i_wire] | (1 << bx);
 
           // Debug information.
           if (infoV > 1) {
             LogTrace("CSCAnodeLCTProcessor")
               << "Wire digi: layer " << i_layer
               << " digi #" << ++digi_num << " wire group " << i_wire
               << " time " << bx_times[i];
             if (infoV > 2) {
               std::ostringstream strstrm;
               for (int i = 1; i <= 32; i++) {
                 strstrm << ((pulse[i_layer][i_wire]>>(32-i)) & 1);
               }
               LogTrace("CSCAnodeLCTProcessor") << "  Pulse: " << strstrm.str();
             }
           }
         }
       }
     }
   }
 
   if (infoV > 1 && !chamber_empty) {
     dumpDigis(wire);
   }
 
   return chamber_empty;
 }

std::vector< CSCALCTDigi > CSCAnodeLCTProcessor::readoutALCTs ( )

Returns vector of ALCTs in the read-out time window, if any.

Definition at line 1627 of file CSCAnodeLCTProcessor.cc.

References early_tbins, fifo_pretrig, getALCTs(), infoV, l1a_window_width, LogDebug, and MAX_ALCT_BINS.

                                                           {
   std::vector<CSCALCTDigi> tmpV;
 
   // The number of LCT bins in the read-out is given by the
   // l1a_window_width parameter, but made even by setting the LSB of
   // l1a_window_width to 0.
   static int lct_bins   = 
     //    (l1a_window_width%2 == 0) ? l1a_window_width : l1a_window_width-1;
     l1a_window_width;
   static int late_tbins = early_tbins + lct_bins;
 
   static int ifois = 0;
   if (ifois == 0) {
 
     //std::cout<<"ALCT early_tbins="<<early_tbins<<"  lct_bins="<<lct_bins<<"  l1a_window_width="<<l1a_window_width<<"  late_tbins="<<late_tbins<<std::endl;
     //std::cout<<"**** ALCT readoutALCTs config dump ****"<<std::endl;
     //dumpConfigParams();
 
     if (infoV >= 0 && early_tbins < 0) {
       edm::LogWarning("L1CSCTPEmulatorSuspiciousParameters")
         << "+++ fifo_pretrig = " << fifo_pretrig
         << "; in-time ALCTs are not getting read-out!!! +++" << "\n";
     }
 
     if (late_tbins > MAX_ALCT_BINS-1) {
       if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorSuspiciousParameters")
         << "+++ Allowed range of time bins, [0-" << late_tbins
         << "] exceeds max allowed, " << MAX_ALCT_BINS-1 << " +++\n"
         << "+++ Set late_tbins to max allowed +++\n";
       late_tbins = MAX_ALCT_BINS-1;
     }
     ifois = 1;
   }
 
   // Start from the vector of all found ALCTs and select those within
   // the ALCT*L1A coincidence window.
   std::vector<CSCALCTDigi> all_alcts = getALCTs();
   for (std::vector <CSCALCTDigi>::const_iterator plct = all_alcts.begin();
        plct != all_alcts.end(); plct++) {
     if (!plct->isValid()) continue;
 
     int bx = (*plct).getBX();
     // Skip ALCTs found too early relative to L1Accept.
     if (bx <= early_tbins) {
       if (infoV > 1) LogDebug("CSCAnodeLCTProcessor")
         << " Do not report ALCT on keywire " << plct->getKeyWG()
         << ": found at bx " << bx << ", whereas the earliest allowed bx is "
         << early_tbins+1;
       continue;
     }
 
     // Skip ALCTs found too late relative to L1Accept.
     if (bx > late_tbins) {
       if (infoV > 1) LogDebug("CSCAnodeLCTProcessor")
         << " Do not report ALCT on keywire " << plct->getKeyWG()
         << ": found at bx " << bx << ", whereas the latest allowed bx is "
         << late_tbins;
       continue;
     }
 
     tmpV.push_back(*plct);
   }
   return tmpV;
 }

void CSCAnodeLCTProcessor::readWireDigis ( std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES] )

private

ALCT algorithm methods.

Definition at line 679 of file CSCAnodeLCTProcessor.cc.

References begin, digiV, fifo_tbins, i, infoV, LogTrace, CSCConstants::NUM_LAYERS, and numWireGroups.

Referenced by run().

                                                                                                                {
   /* Gets wire times from the wire digis and fills wire[][] vector */
 
   // Loop over all 6 layers.
   for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
     // Loop over all digis in the layer and find the wireGroup and bx
     // time for each.
     for (std::vector<CSCWireDigi>::iterator pld = digiV[i_layer].begin();
          pld != digiV[i_layer].end(); pld++) {
       int i_wire  = pld->getWireGroup()-1;
       std::vector<int> bx_times = pld->getTimeBinsOn();
 
       // Check that the wires and times are appropriate.
       if (i_wire < 0 || i_wire >= numWireGroups) {
         if (infoV >= 0) edm::LogWarning("L1CSCTPEmulatorWrongInput")
           << "+++ Found wire digi with wrong wire number = " << i_wire
           << " (max wires = " << numWireGroups << "); skipping it... +++\n";
         continue;
       }
       // Accept digis in expected time window.  Total number of time
       // bins in DAQ readout is given by fifo_tbins, which thus
       // determines the maximum length of time interval.  Anode raw
       // hits in DAQ readout start (fifo_pretrig - 6) clocks before
       // L1Accept.  If times earlier than L1Accept were recorded, we
       // use them since they can modify the ALCTs found later, via
       // ghost-cancellation logic.
       int last_time = -999;
       if (bx_times.size() == fifo_tbins) {
         wire[i_layer][i_wire].push_back(0);        
         wire[i_layer][i_wire].push_back(6);
       }
       else {
         for (unsigned int i = 0; i < bx_times.size(); i++) {
           // Find rising edge change
           if (i > 0 && bx_times[i] == (bx_times[i-1]+1)) continue;
           if (bx_times[i] < static_cast<int>(fifo_tbins)) {
             if (infoV > 2) LogTrace("CSCAnodeLCTProcessor")
                              << "Digi on layer " << i_layer << " wire " << i_wire
                              << " at time " << bx_times[i];
 
             // Finally save times of hit wires.  One shot module will
             // not restart if a new pulse comes before the expiration
             // of the 6-bx period.
             if (last_time < 0 || ((bx_times[i]-last_time) >= 6) ) {
               wire[i_layer][i_wire].push_back(bx_times[i]);
               last_time = bx_times[i];
             }
           }
           else {
             if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
                              << "+++ Skipping wire digi: wire = " << i_wire
                              << " layer = " << i_layer << ", bx = " << bx_times[i] << " +++";
           }
         }
       }
     }
   }
 }

std::vector< CSCALCTDigi > CSCAnodeLCTProcessor::run ( const CSCWireDigiCollection * wiredc )

Runs the LCT processor code. Called in normal running – gets info from a collection of wire digis.

Definition at line 492 of file CSCAnodeLCTProcessor.cc.

References CSCTriggerGeomManager::chamber(), dumpConfigParams(), relativeConstraints::empty, CSCLayer::geometry(), CSCTriggerGeometry::get(), getALCTs(), getDigis(), infoV, isSLHC, CSCChamber::layer(), CSCConstants::MAX_NUM_WIRES, nplanes_hit_accel_pattern, nplanes_hit_pattern, CSCConstants::NUM_LAYERS, CSCLayerGeometry::numberOfWireGroups(), numWireGroups, readWireDigis(), theChamber, theEndcap, theRing, theSector, theStation, theSubsector, and theTrigChamber.

                                                              {
   // This is the main routine for normal running.  It gets wire times
   // from the wire digis and then passes them on to another run() function.
 
   // clear(); // redundant; called by L1MuCSCMotherboard.
 
   static bool config_dumped = false;
   if ((infoV > 0 || isSLHC) && !config_dumped) {
     //std::cout<<"**** ALCT run parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 
 
   // Get the number of wire groups for the given chamber.  Do it only once
   // per chamber.
   if (numWireGroups == 0) {
     CSCTriggerGeomManager* theGeom = CSCTriggerGeometry::get();
     CSCChamber* chamber = theGeom->chamber(theEndcap, theStation, theSector,
                                            theSubsector, theTrigChamber);
     if (chamber) {
       numWireGroups = chamber->layer(1)->geometry()->numberOfWireGroups();
       if (numWireGroups > CSCConstants::MAX_NUM_WIRES) {
         if (infoV >= 0) edm::LogError("L1CSCTPEmulatorSetupError")
           << "+++ Number of wire groups, " << numWireGroups
           << " found in ME" << ((theEndcap == 1) ? "+" : "-")
           << theStation << "/" << theRing << "/" << theChamber
           << " (sector " << theSector << " subsector " << theSubsector
           << " trig id. " << theTrigChamber << ")"
           << " exceeds max expected, " << CSCConstants::MAX_NUM_WIRES
           << " +++\n" 
           << "+++ CSC geometry looks garbled; no emulation possible +++\n";
         numWireGroups = -1;
       }
     }
     else {
       if (infoV >= 0) edm::LogError("L1CSCTPEmulatorSetupError")
         << "+++ ME" << ((theEndcap == 1) ? "+" : "-")
         << theStation << "/" << theRing << "/" << theChamber
         << " (sector " << theSector << " subsector " << theSubsector
         << " trig id. " << theTrigChamber << ")"
         << " is not defined in current geometry! +++\n"
         << "+++ CSC geometry looks garbled; no emulation possible +++\n";
       numWireGroups = -1;
     }
   }
 
   if (numWireGroups < 0) {
     if (infoV >= 0) edm::LogError("L1CSCTPEmulatorSetupError")
       << "+++ ME" << ((theEndcap == 1) ? "+" : "-")
       << theStation << "/" << theRing << "/" << theChamber
       << " (sector " << theSector << " subsector " << theSubsector
       << " trig id. " << theTrigChamber << "):"
       << " numWireGroups = " << numWireGroups
       << "; ALCT emulation skipped! +++";
     std::vector<CSCALCTDigi> emptyV;
     return emptyV;
   }
 
   // Get wire digis in this chamber from wire digi collection.
   bool noDigis = getDigis(wiredc);
 
   if (!noDigis) {
     // First get wire times from the wire digis.
     std::vector<int>
       wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES];
     readWireDigis(wire);
 
     // Pass an array of wire times on to another run() doing the LCT search.
     // If the number of layers containing digis is smaller than that
     // required to trigger, quit right away.
     const unsigned int min_layers =
       (nplanes_hit_accel_pattern == 0) ? 
         nplanes_hit_pattern :
         ((nplanes_hit_pattern <= nplanes_hit_accel_pattern) ?
            nplanes_hit_pattern :
            nplanes_hit_accel_pattern
         );
 
     unsigned int layersHit = 0;
     for (int i_layer = 0; i_layer < CSCConstants::NUM_LAYERS; i_layer++) {
       for (int i_wire = 0; i_wire < numWireGroups; i_wire++) {
         if (!wire[i_layer][i_wire].empty()) {layersHit++; break;}
       }
     }
     if (layersHit >= min_layers) run(wire);
   }
 
   // Return vector of all found ALCTs.
   std::vector<CSCALCTDigi> tmpV = getALCTs();
   return tmpV;
 }

void CSCAnodeLCTProcessor::run ( const std::vector< int > wire[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES] )

Runs the LCT processor code. Called in normal running or in testing mode.

Definition at line 585 of file CSCAnodeLCTProcessor.cc.

References drift_delay, fifo_tbins, first_bx, ghostCancellationLogic(), ghostCancellationLogicSLHC(), infoV, isSLHC, lctSearch(), numWireGroups, patternDetection(), pretrig_extra_deadtime, preTrigger(), pulseExtension(), and showPatterns().

                                                                                                            {
   // This version of the run() function can either be called in a standalone
   // test, being passed the time array, or called by the run() function above.
   // It gets wire times from an input array and then loops over the keywires.
   // All found LCT candidates are sorted and the best two are retained.
 
   bool trigger = false;
 
   // Check if there are any in-time hits and do the pulse extension.
   bool chamber_empty = pulseExtension(wire);
 
   // Only do the rest of the processing if chamber is not empty.
   // Stop drift_delay bx's short of fifo_tbins since at later bx's we will
   // not have a full set of hits to start pattern search anyway.
   unsigned int stop_bx = fifo_tbins - drift_delay;
   if (!chamber_empty) {
     for (int i_wire = 0; i_wire < numWireGroups; i_wire++) {
       unsigned int start_bx = 0;
       // Allow for more than one pass over the hits in the time window.
       while (start_bx < stop_bx) {
         if (preTrigger(i_wire, start_bx)) {
           if (infoV > 2) showPatterns(i_wire);
           if (patternDetection(i_wire)) {
             trigger = true;
             break;
           }
           else {
             // Assume that the earliest time when another pre-trigger can
             // occur in case pattern detection failed is bx_pretrigger+4:
             // this seems to match the data.
             start_bx = first_bx[i_wire] + drift_delay + pretrig_extra_deadtime;
           }
         }
         else {
           break;
         }
       }
     }
   }
 
   // Do the rest only if there is at least one trigger candidate.
   if (trigger) {
     if (isSLHC) ghostCancellationLogicSLHC();
     else ghostCancellationLogic();
     lctSearch();
   }
 }

void CSCAnodeLCTProcessor::setConfigParameters ( const CSCDBL1TPParameters * conf )

Sets configuration parameters obtained via EventSetup mechanism.

Definition at line 352 of file CSCAnodeLCTProcessor.cc.

                                                                               {
   static bool config_dumped = false;
 
   fifo_tbins   = conf->alctFifoTbins();
   fifo_pretrig = conf->alctFifoPretrig();
   drift_delay  = conf->alctDriftDelay();
   nplanes_hit_pretrig = conf->alctNplanesHitPretrig();
   nplanes_hit_pattern = conf->alctNplanesHitPattern();
   nplanes_hit_accel_pretrig = conf->alctNplanesHitAccelPretrig();
   nplanes_hit_accel_pattern = conf->alctNplanesHitAccelPattern();
   trig_mode        = conf->alctTrigMode();
   accel_mode       = conf->alctAccelMode();
   l1a_window_width = conf->alctL1aWindowWidth();
 
   // Check and print configuration parameters.
   checkConfigParameters();
   if (!config_dumped) {
     //std::cout<<"**** ALCT setConfigParam parameters dump ****"<<std::endl;
     dumpConfigParams();
     config_dumped = true;
   }
 }

void CSCAnodeLCTProcessor::setDefaultConfigParameters ( )

private

Set default values for configuration parameters.

Definition at line 337 of file CSCAnodeLCTProcessor.cc.

References accel_mode, def_accel_mode, def_drift_delay, def_fifo_pretrig, def_fifo_tbins, def_l1a_window_width, def_nplanes_hit_accel_pattern, def_nplanes_hit_accel_pretrig, def_nplanes_hit_pattern, def_nplanes_hit_pretrig, def_trig_mode, drift_delay, fifo_pretrig, fifo_tbins, l1a_window_width, nplanes_hit_accel_pattern, nplanes_hit_accel_pretrig, nplanes_hit_pattern, nplanes_hit_pretrig, and trig_mode.

Referenced by CSCAnodeLCTProcessor().

                                                       {
   // Set default values for configuration parameters.
   fifo_tbins   = def_fifo_tbins;
   fifo_pretrig = def_fifo_pretrig;
   drift_delay  = def_drift_delay;
   nplanes_hit_pretrig = def_nplanes_hit_pretrig;
   nplanes_hit_pattern = def_nplanes_hit_pattern;
   nplanes_hit_accel_pretrig = def_nplanes_hit_accel_pretrig;
   nplanes_hit_accel_pattern = def_nplanes_hit_accel_pattern;
   trig_mode        = def_trig_mode;
   accel_mode       = def_accel_mode;
   l1a_window_width = def_l1a_window_width;
 }

void CSCAnodeLCTProcessor::setRing ( unsigned r )

inline

set ring number. Important only for ME1a

Definition at line 77 of file CSCAnodeLCTProcessor.h.

References alignCSCRings::r, and theRing.

77 {theRing = r;}

CSCAnodeLCTProcessor::theRing

unsigned theRing

Definition: CSCAnodeLCTProcessor.h:102

alignCSCRings.r

list r

Definition: alignCSCRings.py:92

void CSCAnodeLCTProcessor::showPatterns ( const int key_wire )

private

Definition at line 1705 of file CSCAnodeLCTProcessor.cc.

References i, LogTrace, MESelection, CSCConstants::NUM_ALCT_PATTERNS, NUM_PATTERN_WIRES, numWireGroups, pattern_envelope, and pattern_mask.

Referenced by run().

                                                           {
   /* Method to test the pretrigger */
   for (int i_pattern = 0; i_pattern < CSCConstants::NUM_ALCT_PATTERNS;
        i_pattern++) {
     std::ostringstream strstrm_header;
     LogTrace("CSCAnodeLCTProcessor")
       << "\n" << "Pattern: " << i_pattern << " Key wire: " << key_wire;
     for (int i = 1; i <= 32; i++) {
       strstrm_header << ((32-i)%10);
     }
     LogTrace("CSCAnodeLCTProcessor") << strstrm_header.str();
     for (int i_wire = 0; i_wire < NUM_PATTERN_WIRES; i_wire++) {
       if (pattern_mask[i_pattern][i_wire] != 0) {
         std::ostringstream strstrm_pulse;
         int this_layer = pattern_envelope[0][i_wire];
         int this_wire  = pattern_envelope[1+MESelection][i_wire]+key_wire;
         if (this_wire >= 0 && this_wire < numWireGroups) {
           for (int i = 1; i <= 32; i++) {
             strstrm_pulse << ((pulse[this_layer][this_wire]>>(32-i)) & 1);
           }
           LogTrace("CSCAnodeLCTProcessor")
             << strstrm_pulse.str() << " on layer " << this_layer;
         }
       }
     }
     LogTrace("CSCAnodeLCTProcessor")
       << "-------------------------------------------";
   }
 }

void CSCAnodeLCTProcessor::trigMode ( const int key_wire )

private

Definition at line 1479 of file CSCAnodeLCTProcessor.cc.

References infoV, LogTrace, quality, and trig_mode.

Referenced by lctSearch().

                                                       {
   /* Function which enables/disables either collision or accelerator tracks.
      The function uses the trig_mode parameter to decide. */
 
   switch(trig_mode) {
   default:
   case 0:
     // Enables both collision and accelerator tracks
     break;
   case 1:
     // Disables collision tracks
     if (quality[key_wire][1] > 0) {
       quality[key_wire][1] = 0;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "trigMode(): collision track " << key_wire << " disabled" << "\n";
     }
     break;
   case 2:
     // Disables accelerator tracks
     if (quality[key_wire][0] > 0) {
       quality[key_wire][0] = 0;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "trigMode(): accelerator track " << key_wire << " disabled" << "\n";
     }
     break;
   case 3:
     // Disables collision track if there is an accelerator track found
     // in the same wire group at the same time
     if (quality[key_wire][0] > 0 && quality[key_wire][1] > 0) {
       quality[key_wire][1] = 0;
       if (infoV > 1) LogTrace("CSCAnodeLCTProcessor")
         << "trigMode(): collision track " << key_wire << " disabled" << "\n";
     }
     break;
   }
 }

Member Data Documentation

unsigned int CSCAnodeLCTProcessor::accel_mode

private

Definition at line 130 of file CSCAnodeLCTProcessor.h.

Referenced by accelMode(), checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), setConfigParameters(), and setDefaultConfigParameters().

CSCALCTDigi CSCAnodeLCTProcessor::bestALCT[MAX_ALCT_BINS]

Best LCTs in this chamber, as found by the processor. In old ALCT algorithms, up to two best ALCT per Level-1 accept window had been reported. In the ALCT-2006 algorithms, up to two best ALCTs PER EVERY TIME BIN in Level-1 accept window are reported.

Definition at line 65 of file CSCAnodeLCTProcessor.h.

Referenced by clear(), getALCTs(), and lctSearch().

const unsigned int CSCAnodeLCTProcessor::def_accel_mode = 0

staticprivate

Definition at line 169 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_drift_delay = 2

staticprivate

Definition at line 165 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_fifo_pretrig = 10

staticprivate

Definition at line 164 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_fifo_tbins = 16

staticprivate

Default values of configuration parameters.

Definition at line 164 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_l1a_window_width = 7

staticprivate

Definition at line 170 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_nplanes_hit_accel_pattern = 4

staticprivate

Definition at line 168 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_nplanes_hit_accel_pretrig = 2

staticprivate

Definition at line 167 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_nplanes_hit_pattern = 4

staticprivate

Definition at line 166 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_nplanes_hit_pretrig = 2

staticprivate

Definition at line 166 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

const unsigned int CSCAnodeLCTProcessor::def_trig_mode = 2

staticprivate

Definition at line 169 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), and setDefaultConfigParameters().

std::vector<CSCWireDigi> CSCAnodeLCTProcessor::digiV[CSCConstants::NUM_LAYERS]

private

Definition at line 114 of file CSCAnodeLCTProcessor.h.

Referenced by getDigis(), and readWireDigis().

bool CSCAnodeLCTProcessor::disableME1a

private

SLHC: special configuration parameters for ME1a treatment

Definition at line 136 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and getDigis().

unsigned int CSCAnodeLCTProcessor::drift_delay

private

Definition at line 127 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), patternDetection(), preTrigger(), run(), setConfigParameters(), and setDefaultConfigParameters().

int CSCAnodeLCTProcessor::early_tbins

private

SLHC: separate handle for early time bins

Definition at line 139 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and readoutALCTs().

unsigned int CSCAnodeLCTProcessor::fifo_pretrig

private

Definition at line 127 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), readoutALCTs(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCAnodeLCTProcessor::fifo_tbins

private

Configuration parameters.

Definition at line 127 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), preTrigger(), readWireDigis(), run(), setConfigParameters(), and setDefaultConfigParameters().

int CSCAnodeLCTProcessor::first_bx[CSCConstants::MAX_NUM_WIRES]

private

Definition at line 111 of file CSCAnodeLCTProcessor.h.

Referenced by ghostCancellationLogic(), ghostCancellationLogicSLHC(), lctSearch(), patternDetection(), preTrigger(), pulseExtension(), and run().

int CSCAnodeLCTProcessor::first_bx_corrected[CSCConstants::MAX_NUM_WIRES]

private

Definition at line 112 of file CSCAnodeLCTProcessor.h.

Referenced by ghostCancellationLogicSLHC(), lctSearch(), patternDetection(), and pulseExtension().

int CSCAnodeLCTProcessor::ghost_cancellation_bx_depth

private

SLHC: delta BX time depth for ghostCancellationLogic

Definition at line 142 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), ghostCancellationLogic(), and ghostCancellationLogicSLHC().

bool CSCAnodeLCTProcessor::ghost_cancellation_side_quality

private

SLHC: whether to consider ALCT candidates' qualities while doing ghostCancellationLogic on +-1 wire groups

Definition at line 146 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), ghostCancellationLogic(), and ghostCancellationLogicSLHC().

unsigned int CSCAnodeLCTProcessor::hit_persist

private

SLHC: hit persistency length

Definition at line 133 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), patternDetection(), and pulseExtension().

int CSCAnodeLCTProcessor::infoV

private

Verbosity level: 0: no print (default). 1: print only ALCTs found. 2: info at every step of the algorithm. 3: add special-purpose prints.

Definition at line 92 of file CSCAnodeLCTProcessor.h.

Referenced by accelMode(), bestTrackSelector(), checkConfigParameters(), CSCAnodeLCTProcessor(), getDigis(), ghostCancellationLogic(), ghostCancellationLogicSLHC(), lctSearch(), patternDetection(), preTrigger(), pulseExtension(), readoutALCTs(), readWireDigis(), run(), and trigMode().

bool CSCAnodeLCTProcessor::isME11

private

Definition at line 106 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and getDigis().

bool CSCAnodeLCTProcessor::isMTCC

private

Flag for MTCC data (i.e., "open" patterns).

Definition at line 118 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and loadPatternMask().

bool CSCAnodeLCTProcessor::isSLHC

private

Flag for SLHC studies.

Definition at line 124 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and run().

bool CSCAnodeLCTProcessor::isTMB07

private

Use TMB07 flag for DAQ-2006 version (implemented in late 2007).

Definition at line 121 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), lctSearch(), loadPatternMask(), and patternDetection().

unsigned int CSCAnodeLCTProcessor::l1a_window_width

private

Definition at line 130 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), readoutALCTs(), setConfigParameters(), and setDefaultConfigParameters().

int CSCAnodeLCTProcessor::MESelection

private

Definition at line 109 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), patternDetection(), preTrigger(), and showPatterns().

bool CSCAnodeLCTProcessor::narrow_mask_r1

private

SLHC: whether to use narrow pattern mask for the rings close to the beam

Definition at line 155 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and loadPatternMask().

unsigned int CSCAnodeLCTProcessor::nplanes_hit_accel_pattern

private

Definition at line 129 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), patternDetection(), run(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCAnodeLCTProcessor::nplanes_hit_accel_pretrig

private

Definition at line 128 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), preTrigger(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCAnodeLCTProcessor::nplanes_hit_pattern

private

Definition at line 129 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), patternDetection(), run(), setConfigParameters(), and setDefaultConfigParameters().

unsigned int CSCAnodeLCTProcessor::nplanes_hit_pretrig

private

Definition at line 128 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), preTrigger(), setConfigParameters(), and setDefaultConfigParameters().

int CSCAnodeLCTProcessor::numWireGroups

private

Definition at line 108 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), dumpDigis(), ghostCancellationLogic(), ghostCancellationLogicSLHC(), lctSearch(), patternDetection(), preTrigger(), pulseExtension(), readWireDigis(), run(), and showPatterns().

const int CSCAnodeLCTProcessor::pattern_envelope

static

Initial value:

= {
  
  { 0,  0,  0,
        1,  1,
            2,
            3,  3,
            4,  4,  4,
            5,  5,  5},
  
  {-2, -1,  0,
       -1,  0,
            0,
            0,  1,
            0,  1,  2,
            0,  1,  2},
  
  {2,  1,  0,
       1,  0,
           0,
           0, -1,
           0, -1, -2,
           0, -1, -2}
}

Definition at line 81 of file CSCAnodeLCTProcessor.h.

Referenced by patternDetection(), preTrigger(), and showPatterns().

int CSCAnodeLCTProcessor::pattern_mask[CSCConstants::NUM_ALCT_PATTERNS][NUM_PATTERN_WIRES]

private

Chosen pattern mask.

Definition at line 173 of file CSCAnodeLCTProcessor.h.

Referenced by loadPatternMask(), patternDetection(), preTrigger(), and showPatterns().

const int CSCAnodeLCTProcessor::pattern_mask_open

static

Initial value:

= {
  
  {0,  0,  1,
       0,  1,
           1,
           1,  0,
           1,  0,  0,
           1,  0,  0},
  
  {1,  1,  1,
       1,  1,
           1,
           1,  1,
           1,  1,  1,
           1,  1,  1},
  
  {1,  1,  1,
       1,  1,
           1,
           1,  1,
           1,  1,  1,
           1,  1,  1}
}

Definition at line 83 of file CSCAnodeLCTProcessor.h.

Referenced by loadPatternMask().

const int CSCAnodeLCTProcessor::pattern_mask_r1

static

Initial value:

= {
  
  {0,  0,  1,
       0,  1,
           1,
           1,  0,
           1,  0,  0,
           1,  0,  0},
  
  {0,  1,  1,
       1,  1,
           1,
           1,  0,
           1,  1,  0,
           1,  1,  0},
  
  {0,  1,  1,
       1,  1,
           1,
           1,  0,
           1,  1,  0,
           1,  1,  0}
}

Definition at line 84 of file CSCAnodeLCTProcessor.h.

Referenced by loadPatternMask().

const int CSCAnodeLCTProcessor::pattern_mask_slim

static

Initial value:

= {
  
  {0,  0,  1,
       0,  1,
           1,
           1,  0,
           1,  0,  0,
           1,  0,  0},
  
  {0,  1,  0,
       1,  1,
           1,
           1,  0,
           0,  1,  0,
           0,  1,  0},
  
  {1,  1,  0,
       1,  1,
           1,
           1,  1,
           0,  1,  1,
           0,  0,  1}
}

Definition at line 82 of file CSCAnodeLCTProcessor.h.

Referenced by loadPatternMask().

unsigned int CSCAnodeLCTProcessor::pretrig_extra_deadtime

private

SLHC: deadtime clocks after pretrigger (extra in addition to drift_delay)

Definition at line 149 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), and run().

unsigned int CSCAnodeLCTProcessor::pulse[CSCConstants::NUM_LAYERS][CSCConstants::MAX_NUM_WIRES]

private

Definition at line 115 of file CSCAnodeLCTProcessor.h.

Referenced by patternDetection(), preTrigger(), and pulseExtension().

int CSCAnodeLCTProcessor::quality[CSCConstants::MAX_NUM_WIRES][3]

private

Definition at line 113 of file CSCAnodeLCTProcessor.h.

Referenced by accelMode(), clear(), ghostCancellationLogic(), ghostCancellationLogicSLHC(), isBetterALCT(), lctSearch(), patternDetection(), pulseExtension(), and trigMode().

bool CSCAnodeLCTProcessor::runME21ILT_

private

SLHC: run the ALCT processor for the Phase-II ME2/1 integrated local trigger

Definition at line 158 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), ghostCancellationLogicSLHC(), and patternDetection().

bool CSCAnodeLCTProcessor::runME3141ILT_

private

SLHC: run the ALCT processor for the Phase-II ME3/1(ME4/1) integrated local trigger

Definition at line 161 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), ghostCancellationLogicSLHC(), and patternDetection().

CSCALCTDigi CSCAnodeLCTProcessor::secondALCT[MAX_ALCT_BINS]

Second best LCTs in this chamber, as found by the processor.

Definition at line 68 of file CSCAnodeLCTProcessor.h.

Referenced by clear(), getALCTs(), and lctSearch().

unsigned CSCAnodeLCTProcessor::theChamber

private

Definition at line 104 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), dumpDigis(), getDigis(), lctSearch(), and run().

const unsigned CSCAnodeLCTProcessor::theEndcap

private

Chamber id (trigger-type labels).

Definition at line 95 of file CSCAnodeLCTProcessor.h.

Referenced by dumpDigis(), getDigis(), lctSearch(), and run().

unsigned CSCAnodeLCTProcessor::theRing

private

ring number. Only matters for ME1a

Definition at line 102 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), dumpDigis(), getDigis(), lctSearch(), loadPatternMask(), run(), and setRing().

const unsigned CSCAnodeLCTProcessor::theSector

private

Definition at line 97 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), getDigis(), lctSearch(), and run().

const unsigned CSCAnodeLCTProcessor::theStation

private

Definition at line 96 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), dumpDigis(), getDigis(), lctSearch(), and run().

const unsigned CSCAnodeLCTProcessor::theSubsector

private

Definition at line 98 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), getDigis(), lctSearch(), and run().

const unsigned CSCAnodeLCTProcessor::theTrigChamber

private

Definition at line 99 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), getDigis(), lctSearch(), and run().

const int CSCAnodeLCTProcessor::time_weights

static

Initial value:

=
  
  { 0,  1,  1,
        1,  2,
            2,
            2,  1,
            2,  1,  0,
            1,  1,  0}

Definition at line 85 of file CSCAnodeLCTProcessor.h.

unsigned int CSCAnodeLCTProcessor::trig_mode

private

Definition at line 130 of file CSCAnodeLCTProcessor.h.

Referenced by checkConfigParameters(), CSCAnodeLCTProcessor(), dumpConfigParams(), setConfigParameters(), setDefaultConfigParameters(), and trigMode().

bool CSCAnodeLCTProcessor::use_corrected_bx

private

SLHC: whether to use corrected_bx instead of pretrigger BX

Definition at line 152 of file CSCAnodeLCTProcessor.h.

Referenced by CSCAnodeLCTProcessor(), ghostCancellationLogicSLHC(), and lctSearch().

Public Types

Public Member Functions

Public Attributes

Static Public Attributes

Private Member Functions

Private Attributes

Static Private Attributes

Detailed Description

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation