#include <TopSingleLeptonDQM_miniAOD.h>

Inheritance diagram for TopSingleLeptonDQM_miniAOD:

Public Member Functions
virtual void	analyze (const edm::Event &event, const edm::EventSetup &setup)
	do this during the event loop More...

	TopSingleLeptonDQM_miniAOD (const edm::ParameterSet &cfg)
	default constructor More...

	~TopSingleLeptonDQM_miniAOD ()
	default destructor More...

Public Member Functions inherited from DQMEDAnalyzer
virtual void	beginRun (edm::Run const &, edm::EventSetup const &) final

virtual void	beginStream (edm::StreamID id) final

virtual void	dqmBeginRun (edm::Run const &, edm::EventSetup const &)

	DQMEDAnalyzer (void)

virtual void	endLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

virtual void	endRunSummary (edm::Run const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

uint32_t	streamId () const

Public Member Functions inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
	EDAnalyzer ()=default

Public Member Functions inherited from edm::stream::EDAnalyzerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

	EDAnalyzerBase ()

ModuleDescription const &	moduleDescription () const

virtual	~EDAnalyzerBase ()

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (std::string const &iProcessName, std::string const &iModuleLabel, bool iPrint, std::vector< char const * > &oModuleLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Protected Member Functions
void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Private Member Functions
std::string	objectType (const std::string &label)

std::string	selectionStep (const std::string &label)

Private Attributes
edm::InputTag	beamspot_
	beamspot More...

edm::EDGetTokenT< reco::BeamSpot >	beamspot__

std::unique_ptr < StringCutObjectSelector < reco::BeamSpot > >	beamspotSelect_
	string cut selector More...

std::unique_ptr< SelectionStep < pat::Electron > >	ElectronStep

std::vector< std::unique_ptr < SelectionStep< pat::Jet > > >	JetSteps

std::unique_ptr< SelectionStep < pat::MET > >	METStep

std::unique_ptr< SelectionStep < pat::Muon > >	MuonStep

std::unique_ptr< SelectionStep < reco::Vertex > >	PvStep

std::vector< edm::ParameterSet >	sel_

std::map< std::string, std::pair< edm::ParameterSet, std::unique_ptr < TopSingleLepton_miniAOD::MonitorEnsemble > > >	selection_

std::vector< std::string >	selectionOrder_

edm::ParameterSet	setup_

std::vector< std::string >	triggerPaths_
	trigger paths More...

edm::EDGetTokenT < edm::TriggerResults >	triggerTable__
	trigger table More...

std::unique_ptr < StringCutObjectSelector < reco::Vertex > >	vertexSelect_
	string cut selector More...

Additional Inherited Members
Public Types inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
typedef CacheContexts< T...>	CacheTypes

typedef CacheTypes::GlobalCache	GlobalCache

typedef AbilityChecker< T...>	HasAbility

typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache

typedef LuminosityBlockContextT < LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext

typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache

typedef CacheTypes::RunCache	RunCache

typedef RunContextT< RunCache, GlobalCache >	RunContext

typedef CacheTypes::RunSummaryCache	RunSummaryCache

Public Types inherited from edm::stream::EDAnalyzerBase
typedef EDAnalyzerAdaptorBase	ModuleType

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from DQMEDAnalyzer
static std::shared_ptr < dqmDetails::NoCache >	globalBeginLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *)

static std::shared_ptr < dqmDetails::NoCache >	globalBeginRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *)

static void	globalEndLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const , dqmDetails::NoCache )

static void	globalEndRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const , dqmDetails::NoCache )

Static Public Member Functions inherited from edm::stream::EDAnalyzerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Detailed Description

Definition at line 207 of file TopSingleLeptonDQM_miniAOD.h.

Constructor & Destructor Documentation

TopSingleLeptonDQM_miniAOD::TopSingleLeptonDQM_miniAOD ( const edm::ParameterSet & cfg )

default constructor

Definition at line 639 of file TopSingleLeptonDQM_miniAOD.cc.

References HLT_FULL_cff::beamspot, beamspot_, beamspot__, beamspotSelect_, edm::EDConsumerBase::consumesCollector(), ElectronStep, edm::ParameterSet::existsAs(), plotBeamSpotDB::first, edm::ParameterSet::getParameter(), i, JetSteps, relval_steps::key, METStep, MuonStep, objectType(), PvStep, sel_, selection_, selectionOrder_, selectionStep(), setup_, AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, and triggerTable__.

     : vertexSelect_(nullptr),
       beamspot_(""),
       beamspotSelect_(nullptr),
       MuonStep(nullptr),
       ElectronStep(nullptr),
       PvStep(nullptr),
       METStep(nullptr) {
   JetSteps.clear();
 
   // configure preselection
   edm::ParameterSet presel =
       cfg.getParameter<edm::ParameterSet>("preselection");
   if (presel.existsAs<edm::ParameterSet>("trigger")) {
     edm::ParameterSet trigger =
         presel.getParameter<edm::ParameterSet>("trigger");
     triggerTable__ = consumes<edm::TriggerResults>(
         trigger.getParameter<edm::InputTag>("src"));
     triggerPaths_ = trigger.getParameter<std::vector<std::string> >("select");
   }
   if (presel.existsAs<edm::ParameterSet>("beamspot")) {
     edm::ParameterSet beamspot =
         presel.getParameter<edm::ParameterSet>("beamspot");
     beamspot_ = beamspot.getParameter<edm::InputTag>("src");
     beamspot__ =
         consumes<reco::BeamSpot>(beamspot.getParameter<edm::InputTag>("src"));
     beamspotSelect_.reset(new StringCutObjectSelector<reco::BeamSpot>(
         beamspot.getParameter<std::string>("select")));
   }
 
   // conifgure the selection
   sel_ = cfg.getParameter<std::vector<edm::ParameterSet> >("selection");
   setup_ = cfg.getParameter<edm::ParameterSet>("setup");
   for (unsigned int i = 0; i < sel_.size(); ++i) {
     selectionOrder_.push_back(sel_.at(i).getParameter<std::string>("label"));
     selection_[selectionStep(selectionOrder_.back())] = std::make_pair(
         sel_.at(i),
         std::unique_ptr<TopSingleLepton_miniAOD::MonitorEnsemble>(
           new TopSingleLepton_miniAOD::MonitorEnsemble(
             selectionStep(selectionOrder_.back()).c_str(),
             setup_, consumesCollector())));
   }
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "muons") {
         MuonStep.reset(new SelectionStep<pat::Muon>(selection_[key].first,
                                                         consumesCollector()));
       }
       if (type == "elecs") {
         ElectronStep.reset(new SelectionStep<pat::Electron>(
             selection_[key].first, consumesCollector()));
       }
       if (type == "pvs") {
         PvStep.reset(new SelectionStep<reco::Vertex>(selection_[key].first,
                                                  consumesCollector()));
       }
       if (type == "jets") {
         JetSteps.push_back(std::unique_ptr<SelectionStep<pat::Jet>>(
             new SelectionStep<pat::Jet>(selection_[key].first, consumesCollector())));
       }
 
       if (type == "met") {
         METStep.reset(new SelectionStep<pat::MET>(selection_[key].first,
                                                consumesCollector()));
       }
     }
   }
 }

TopSingleLeptonDQM_miniAOD::~TopSingleLeptonDQM_miniAOD ( )

inline

default destructor

Definition at line 212 of file TopSingleLeptonDQM_miniAOD.h.

212 {};

Member Function Documentation

void TopSingleLeptonDQM_miniAOD::analyze	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

virtual

do this during the event loop

Implements edm::stream::EDAnalyzerBase.

Definition at line 716 of file TopSingleLeptonDQM_miniAOD.cc.

References accept(), HLT_FULL_cff::beamspot, beamspot__, beamspotSelect_, ElectronStep, edm::Event::getByToken(), edm::EDGetTokenT< T >::isUninitialized(), JetSteps, relval_steps::key, METStep, MuonStep, NULL, objectType(), PvStep, benchmark_cfg::select, selection_, selectionOrder_, selectionStep(), AlCaHLTBitMon_QueryRunRegistry::string, triggerPaths_, and triggerTable__.

                                                              {
 
   if (!triggerTable__.isUninitialized()) {
     edm::Handle<edm::TriggerResults> triggerTable;
     if (!event.getByToken(triggerTable__, triggerTable)) return;
     if (!accept(event, *triggerTable, triggerPaths_)) return;
   }
   if (!beamspot__.isUninitialized()) {
     edm::Handle<reco::BeamSpot> beamspot;
     if (!event.getByToken(beamspot__, beamspot)) return;
     if (!(*beamspotSelect_)(*beamspot)) return;
   }
 
   unsigned int passed = 0;
   unsigned int nJetSteps = -1;
 
   for (std::vector<std::string>::const_iterator selIt = selectionOrder_.begin();
        selIt != selectionOrder_.end(); ++selIt) {
     std::string key = selectionStep(*selIt), type = objectType(*selIt);
     if (selection_.find(key) != selection_.end()) {
       if (type == "empty") {
         selection_[key].second->fill(event, setup);
       }
       if (type == "muons" && MuonStep != 0) {
         if (MuonStep->select(event)) {
           ++passed;
 
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
 
       if (type == "elecs" && ElectronStep != 0) {
 
         if (ElectronStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
 
       if (type == "pvs" && PvStep != 0) {
         if (PvStep->selectVertex(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
 
       if (type == "jets") {
         nJetSteps++;
         if (JetSteps[nJetSteps] != NULL) {
           if (JetSteps[nJetSteps]->select(event, setup)) {
             ++passed;
             selection_[key].second->fill(event, setup);
           } else
             break;
         }
       }
 
       if (type == "met" && METStep != 0) {
         if (METStep->select(event)) {
           ++passed;
           selection_[key].second->fill(event, setup);
         } else
           break;
       }
     }
   }
 }

void TopSingleLeptonDQM_miniAOD::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overrideprotectedvirtual

Implements DQMEDAnalyzer.

Definition at line 709 of file TopSingleLeptonDQM_miniAOD.cc.

References selection_.

                                          {
 
   for (auto selIt = selection_.begin(); selIt != selection_.end(); ++selIt) {
     selIt->second.second->book(ibooker);
   }
 }

std::string TopSingleLeptonDQM_miniAOD::objectType ( const std::string & label )

inlineprivate

deduce object type from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 225 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

                                                {
     return label.substr(0, label.find(':'));
   };

std::string TopSingleLeptonDQM_miniAOD::selectionStep ( const std::string & label )

inlineprivate

deduce selection step from ParameterSet label, the label is expected to be of type 'objectType:selectionStep'

Definition at line 230 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

                                                   {
     return label.substr(label.find(':') + 1);
   };

Member Data Documentation

edm::InputTag TopSingleLeptonDQM_miniAOD::beamspot_

private

beamspot

Definition at line 243 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by TopSingleLeptonDQM_miniAOD().

edm::EDGetTokenT<reco::BeamSpot> TopSingleLeptonDQM_miniAOD::beamspot__

private

Definition at line 244 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::unique_ptr<StringCutObjectSelector<reco::BeamSpot> > TopSingleLeptonDQM_miniAOD::beamspotSelect_

private

string cut selector

Definition at line 246 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::unique_ptr<SelectionStep<pat::Electron> > TopSingleLeptonDQM_miniAOD::ElectronStep

private

Definition at line 260 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::vector<std::unique_ptr<SelectionStep<pat::Jet> > > TopSingleLeptonDQM_miniAOD::JetSteps

private

Definition at line 263 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::unique_ptr<SelectionStep<pat::MET> > TopSingleLeptonDQM_miniAOD::METStep

private

Definition at line 262 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::unique_ptr<SelectionStep<pat::Muon> > TopSingleLeptonDQM_miniAOD::MuonStep

private

Definition at line 259 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::unique_ptr<SelectionStep<reco::Vertex> > TopSingleLeptonDQM_miniAOD::PvStep

private

Definition at line 261 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

std::vector<edm::ParameterSet> TopSingleLeptonDQM_miniAOD::sel_

private

Definition at line 266 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by TopSingleLeptonDQM_miniAOD().

std::map<std::string, std::pair<edm::ParameterSet, std::unique_ptr<TopSingleLepton_miniAOD::MonitorEnsemble> > > TopSingleLeptonDQM_miniAOD::selection_

private

this is the heart component of the plugin; std::string keeps a label the selection step for later identification, edm::ParameterSet keeps the configuration of the selection for the SelectionStep class, MonitoringEnsemble keeps an instance of the MonitorEnsemble class to be filled after each selection step

Definition at line 258 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), bookHistograms(), and TopSingleLeptonDQM_miniAOD().

std::vector<std::string> TopSingleLeptonDQM_miniAOD::selectionOrder_

private

needed to guarantee the selection order as defined by the order of ParameterSets in the selection vector as defined in the config

Definition at line 250 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by analyze(), and TopSingleLeptonDQM_miniAOD().

edm::ParameterSet TopSingleLeptonDQM_miniAOD::setup_

private

Definition at line 267 of file TopSingleLeptonDQM_miniAOD.h.

Referenced by TopSingleLeptonDQM_miniAOD().

std::vector<std::string> TopSingleLeptonDQM_miniAOD::triggerPaths_