#include <BeamMonitor.h>

Inheritance diagram for BeamMonitor:

Public Member Functions
	BeamMonitor (const edm::ParameterSet &)

	~BeamMonitor ()

Public Member Functions inherited from edm::EDAnalyzer
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

	EDAnalyzer ()

ModuleDescription const &	moduleDescription () const

std::string	workerType () const

virtual	~EDAnalyzer ()

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (std::string const &iProcessName, std::string const &iModuleLabel, bool iPrint, std::vector< char const * > &oModuleLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Protected Member Functions
void	analyze (const edm::Event &e, const edm::EventSetup &c)

void	beginJob ()

void	beginLuminosityBlock (const edm::LuminosityBlock &lumiSeg, const edm::EventSetup &context)

void	beginRun (const edm::Run &r, const edm::EventSetup &c)

void	endJob (const edm::LuminosityBlock &lumiSeg, const edm::EventSetup &c)

void	endLuminosityBlock (const edm::LuminosityBlock &lumiSeg, const edm::EventSetup &c)

void	endRun (const edm::Run &r, const edm::EventSetup &c)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Private Member Functions
void	FitAndFill (const edm::LuminosityBlock &lumiSeg, int &, int &, int &)

void	formatFitTime (char *, const std::time_t &)

void	RestartFitting ()

void	scrollTH1 (TH1 *, std::time_t)

bool	testScroll (std::time_t &, std::time_t &)

Private Attributes
int	beginLumiOfBSFit_

int	beginLumiOfPVFit_

edm::EDGetTokenT< reco::BeamSpot >	bsSrc_

int	countEvt_

int	countGapLumi_

int	countLumi_

MonitorElement *	cutFlowTable

DQMStore *	dbe_

bool	debug_

double	deltaSigCut_

int	endLumiOfBSFit_

int	endLumiOfPVFit_

int	firstAverageFit_

int	fitNLumi_

int	fitPVNLumi_

MonitorElement *	fitResults

int	frun

edm::TimeValue_t	ftimestamp

MonitorElement *	h_d0_phi0

MonitorElement *	h_nTrk_lumi

MonitorElement *	h_nVtx

MonitorElement *	h_nVtx_lumi

MonitorElement *	h_nVtx_lumi_all

MonitorElement *	h_nVtx_st

MonitorElement *	h_PVx [2]

MonitorElement *	h_PVxz

MonitorElement *	h_PVy [2]

MonitorElement *	h_PVyz

MonitorElement *	h_PVz [2]

MonitorElement *	h_sigmaX0

MonitorElement *	h_sigmaY0

MonitorElement *	h_sigmaZ0

MonitorElement *	h_trk_z0

MonitorElement *	h_trkPt

MonitorElement *	h_trkVz

MonitorElement *	h_vx_dz

MonitorElement *	h_vx_vy

MonitorElement *	h_vy_dz

MonitorElement *	h_x0

MonitorElement *	h_y0

MonitorElement *	h_z0

edm::EDGetTokenT < edm::TriggerResults >	hltSrc_

std::map< TString, MonitorElement * >	hs

int	intervalInSec_

std::vector< std::string >	jetTrigger_

int	lastlumi_

int	lastNZbin

std::map< int, int >	mapBeginBSLS

std::map< int, std::time_t >	mapBeginBSTime

std::map< int, int >	mapBeginPVLS

std::map< int, std::time_t >	mapBeginPVTime

std::map< int, std::size_t >	mapLSBSTrkSize

std::map< int, TH1F >	mapLSCF

std::map< int, size_t >	mapLSPVStoreSize

std::map< int, std::vector< int > >	mapNPV

std::map< int, std::vector < float > >	mapPVx

std::map< int, std::vector < float > >	mapPVy

std::map< int, std::vector < float > >	mapPVz

double	maxZ_

unsigned int	min_Ntrks_

unsigned int	minNrVertices_

double	minVtxNdf_

double	minVtxWgt_

std::string	monitorName_

int	nextlumi_

int	nFitElements_

int	nFits_

unsigned int	nthBSTrk_

bool	onlineMode_

edm::ParameterSet	parameters_

reco::BeamSpot	preBS

bool	processed_

MonitorElement *	pvResults

edm::EDGetTokenT < reco::VertexCollection >	pvSrc_

reco::BeamSpot	refBS

std::time_t	refBStime [2]

std::time_t	refPVtime [2]

std::time_t	refTime

MonitorElement *	reportSummary

Float_t	reportSummary_

MonitorElement *	reportSummaryContents [3]

MonitorElement *	reportSummaryMap

int	resetFitNLumi_

bool	resetHistos_

int	resetPVNLumi_

bool	StartAverage_

std::time_t	startTime

Float_t	summaryContent_ [3]

Float_t	summarySum_

BeamFitter *	theBeamFitter

std::time_t	tmpTime

edm::EDGetTokenT < reco::TrackCollection >	tracksLabel_

Additional Inherited Members
Public Types inherited from edm::EDAnalyzer
typedef EDAnalyzer	ModuleType

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from edm::EDAnalyzer
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &)

Detailed Description

Author
Geng-yuan Jeng/UC Riverside Francisco Yumiceva/FNAL

Definition at line 33 of file BeamMonitor.h.

Constructor & Destructor Documentation

BeamMonitor::BeamMonitor ( const edm::ParameterSet & ps )

Definition at line 73 of file BeamMonitor.cc.

References beam_dqm_sourceclient-live_cfg::BeamFitter, beginLumiOfBSFit_, beginLumiOfPVFit_, bsSrc_, edm::EDConsumerBase::consumesCollector(), dbe_, debug_, deltaSigCut_, endLumiOfBSFit_, endLumiOfPVFit_, fitNLumi_, fitPVNLumi_, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), hltSrc_, intervalInSec_, jetTrigger_, lastlumi_, maxZ_, min_Ntrks_, minNrVertices_, minVtxNdf_, minVtxWgt_, monitorName_, nextlumi_, nFits_, onlineMode_, cppFunctionSkipper::operator, parameters_, processed_, pvSrc_, refBStime, refPVtime, resetFitNLumi_, BeamFitter::resetLSRange(), BeamFitter::resetPVFitter(), resetPVNLumi_, BeamFitter::resetRefTime(), BeamFitter::resetTrkVector(), theBeamFitter, and tracksLabel_.

                                                  :
   countEvt_(0),countLumi_(0),nthBSTrk_(0),nFitElements_(3),resetHistos_(false),StartAverage_(false),firstAverageFit_(0),countGapLumi_(0) {
 
   parameters_     = ps;
   monitorName_    = parameters_.getUntrackedParameter<string>("monitorName","YourSubsystemName");
   bsSrc_          = consumes<reco::BeamSpot>(
       parameters_.getUntrackedParameter<InputTag>("beamSpot"));
   tracksLabel_    = consumes<reco::TrackCollection>(
       parameters_.getParameter<ParameterSet>("BeamFitter")
       .getUntrackedParameter<InputTag>("TrackCollection"));
   pvSrc_          = consumes<reco::VertexCollection>(
       parameters_.getUntrackedParameter<InputTag>("primaryVertex"));
   hltSrc_         = consumes<TriggerResults>(
       parameters_.getParameter<InputTag>("hltResults"));
   intervalInSec_  = parameters_.getUntrackedParameter<int>("timeInterval",920);//40 LS X 23"
   fitNLumi_       = parameters_.getUntrackedParameter<int>("fitEveryNLumi",-1);
   resetFitNLumi_  = parameters_.getUntrackedParameter<int>("resetEveryNLumi",-1);
   fitPVNLumi_     = parameters_.getUntrackedParameter<int>("fitPVEveryNLumi",-1);
   resetPVNLumi_   = parameters_.getUntrackedParameter<int>("resetPVEveryNLumi",-1);
   deltaSigCut_    = parameters_.getUntrackedParameter<double>("deltaSignificanceCut",15);
   debug_          = parameters_.getUntrackedParameter<bool>("Debug");
   onlineMode_     = parameters_.getUntrackedParameter<bool>("OnlineMode");
   jetTrigger_     = parameters_.getUntrackedParameter<std::vector<std::string> >("jetTrigger");
   min_Ntrks_      = parameters_.getParameter<ParameterSet>("BeamFitter").getUntrackedParameter<int>("MinimumInputTracks");
   maxZ_           = parameters_.getParameter<ParameterSet>("BeamFitter").getUntrackedParameter<double>("MaximumZ");
   minNrVertices_  = parameters_.getParameter<ParameterSet>("PVFitter").getUntrackedParameter<unsigned int>("minNrVerticesForFit");
   minVtxNdf_      = parameters_.getParameter<ParameterSet>("PVFitter").getUntrackedParameter<double>("minVertexNdf");
   minVtxWgt_      = parameters_.getParameter<ParameterSet>("PVFitter").getUntrackedParameter<double>("minVertexMeanWeight");
 
   dbe_            = Service<DQMStore>().operator->();
 
   if (monitorName_ != "" ) monitorName_ = monitorName_+"/" ;
 
   theBeamFitter = new BeamFitter(parameters_, consumesCollector());
   theBeamFitter->resetTrkVector();
   theBeamFitter->resetLSRange();
   theBeamFitter->resetRefTime();
   theBeamFitter->resetPVFitter();
 
   if (fitNLumi_ <= 0) fitNLumi_ = 1;
   nFits_ = beginLumiOfBSFit_ = endLumiOfBSFit_ = beginLumiOfPVFit_ = endLumiOfPVFit_ = 0;
   refBStime[0] = refBStime[1] = refPVtime[0] = refPVtime[1] = 0;
   maxZ_ = std::fabs(maxZ_);
   lastlumi_ = 0;
   nextlumi_ = 0;
   processed_ = false;
 }

BeamMonitor::~BeamMonitor ( )

Definition at line 122 of file BeamMonitor.cc.

References theBeamFitter.

                           {
   delete theBeamFitter;
 }

Member Function Documentation

void BeamMonitor::analyze	(	const edm::Event &	e,
		const edm::EventSetup &	c
	)

protectedvirtual

Implements edm::EDAnalyzer.

Definition at line 557 of file BeamMonitor.cc.

References bsSrc_, countEvt_, countLumi_, cutFlowTable, dbe_, MonitorElement::Fill(), newFWLiteAna::found, edm::Event::getByToken(), BeamFitter::getCutFlow(), MonitorElement::getName(), MonitorElement::getTH1(), h_nVtx, h_nVtx_st, h_PVx, h_PVxz, h_PVy, h_PVyz, h_PVz, h_trkPt, h_trkVz, hltSrc_, i, jetTrigger_, edm::EventBase::luminosityBlock(), mapNPV, mapPVx, mapPVy, mapPVz, minVtxNdf_, minVtxWgt_, monitorName_, gen::n, nextlumi_, onlineMode_, processed_, edm::Handle< T >::product(), MetAnalyzer::pv(), pvSrc_, BeamFitter::readEvent(), refBS, resetFitNLumi_, MonitorElement::setBinLabel(), StartAverage_, AlCaHLTBitMon_QueryRunRegistry::string, lumiQTWidget::t, theBeamFitter, testEve_cfg::tracks, tracksLabel_, edm::TriggerNames::triggerIndex(), edm::TriggerNames::triggerName(), edm::Event::triggerNames(), triggerResults, and trigNames.

                                          {
   const int nthlumi = iEvent.luminosityBlock();
   if (onlineMode_ && (nthlumi < nextlumi_)) {
     edm::LogInfo("BeamMonitor") << "analyze::  Spilt event from previous lumi section!" << std::endl;
     return;
   }
   if (onlineMode_ && (nthlumi > nextlumi_)) {
     edm::LogInfo("BeamMonitor") << "analyze::  Spilt event from next lumi section!!!" << std::endl;
     return;
   }
 
   countEvt_++;
   theBeamFitter->readEvent(iEvent); //Remember when track fitter read the event in the same place the PVFitter read the events !!!!!!!!!
 
   Handle<reco::BeamSpot> recoBeamSpotHandle;
   iEvent.getByToken(bsSrc_,recoBeamSpotHandle);
   refBS = *recoBeamSpotHandle;
 
   dbe_->setCurrentFolder(monitorName_+"Fit/");
 
   //------Cut Flow Table filled every event!--------------------------------------
   std::string cutFlowTableName = cutFlowTable->getName();
   // Make a copy of the cut flow table from the beam fitter.
   TH1F * tmphisto =
     static_cast<TH1F*>((theBeamFitter->getCutFlow())->Clone("tmphisto"));
   cutFlowTable->getTH1()->SetBins(
       tmphisto->GetNbinsX(),
       tmphisto->GetXaxis()->GetXmin(),
       tmphisto->GetXaxis()->GetXmax());
   // Update the bin labels
   if (countEvt_ == 1) // SetLabel just once
     for(int n=0; n < tmphisto->GetNbinsX(); n++)
       cutFlowTable->setBinLabel(n+1,tmphisto->GetXaxis()->GetBinLabel(n+1),1);
   cutFlowTable = dbe_->book1D(cutFlowTableName, tmphisto);
   delete tmphisto;
 
   //----Reco tracks -------------------------------------
   Handle<reco::TrackCollection> TrackCollection;
   iEvent.getByToken(tracksLabel_, TrackCollection);
   const reco::TrackCollection *tracks = TrackCollection.product();
   for ( reco::TrackCollection::const_iterator track = tracks->begin();
       track != tracks->end(); ++track ) {
     h_trkPt->Fill(track->pt());  //no need to change  here for average bs
     h_trkVz->Fill(track->vz());
   }
 
    //-------HLT Trigger --------------------------------
    edm::Handle<TriggerResults> triggerResults;
    bool JetTrigPass= false;
   if(iEvent.getByToken(hltSrc_, triggerResults)){
      const edm::TriggerNames & trigNames = iEvent.triggerNames(*triggerResults); 
       for (unsigned int i=0; i< triggerResults->size(); i++){
            std::string trigName = trigNames.triggerName(i);
 
          if(JetTrigPass) continue;
 
         for(size_t t=0; t <jetTrigger_.size(); ++t){
   
          if(JetTrigPass) continue;
 
           string string_search (jetTrigger_[t]);
           size_t found = trigName.find(string_search); 
 
           if(found != string::npos){
              int thisTrigger_ = trigNames.triggerIndex(trigName);
              if(triggerResults->accept(thisTrigger_))JetTrigPass = true;
              }//if trigger found
         }//for(t=0;..)
       }//for(i=0; ..)
    }//if trigger colleciton exist)
 
   //------ Primary Vertices-------
   edm::Handle< reco::VertexCollection > PVCollection;
 
   if (iEvent.getByToken(pvSrc_, PVCollection )) {
     int nPVcount = 0;
     int nPVcount_ST =0;   //For Single Trigger(hence ST)
 
     for (reco::VertexCollection::const_iterator pv = PVCollection->begin(); pv != PVCollection->end(); ++pv) {
       //--- vertex selection
       if (pv->isFake() || pv->tracksSize()==0)  continue;
       nPVcount++; // count non fake pv:
 
       if(JetTrigPass)nPVcount_ST++; //non-fake pv with a specific trigger
 
       if (pv->ndof() < minVtxNdf_ || (pv->ndof()+3.)/pv->tracksSize() < 2*minVtxWgt_)  continue;
 
       //Fill this map to store xyx for pv so that later we can remove the first one for run aver
       mapPVx[countLumi_].push_back(pv->x());
       mapPVy[countLumi_].push_back(pv->y());
       mapPVz[countLumi_].push_back(pv->z());
 
       if(!StartAverage_){//for first N LS
         h_PVx[0]->Fill(pv->x());
         h_PVy[0]->Fill(pv->y());
         h_PVz[0]->Fill(pv->z());
         h_PVxz->Fill(pv->z(),pv->x());
         h_PVyz->Fill(pv->z(),pv->y());
       }//for first N LiS
      else{
       h_PVxz->Fill(pv->z(),pv->x());
       h_PVyz->Fill(pv->z(),pv->y());}
 
     }//loop over pvs
 
 
     h_nVtx->Fill(nPVcount*1.); //no need to change it for average BS
 
     mapNPV[countLumi_].push_back((nPVcount_ST));
 
     if(!StartAverage_){ h_nVtx_st->Fill(nPVcount_ST*1.);}
 
   }//if pv collection is availaable
 
 
   if(StartAverage_)
   {
     map<int, std::vector<float> >::iterator itpvx=mapPVx.begin();
     map<int, std::vector<float> >::iterator itpvy=mapPVy.begin();
     map<int, std::vector<float> >::iterator itpvz=mapPVz.begin();
 
     map<int, std::vector<int> >::iterator itbspvinfo=mapNPV.begin();
 
     if( (int)mapPVx.size() > resetFitNLumi_){  //sometimes the events is not there but LS is there!
       mapPVx.erase(itpvx);
       mapPVy.erase(itpvy);
       mapPVz.erase(itpvz);
       mapNPV.erase(itbspvinfo);
     }//loop over Last N lumi collected
 
   }//StartAverage==true
 
   processed_ = true;
 }

void BeamMonitor::beginJob ( void )

protectedvirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 128 of file BeamMonitor.cc.

References cutFlowTable, pyrootRender::da, dbe_, objects.IsoTrackAnalyzer::dzMax, MonitorElement::Fill(), fitResults, MonitorElement::getName(), edm::ParameterSet::getParameter(), MonitorElement::getTH1(), MonitorElement::getTH2F(), h_d0_phi0, h_nTrk_lumi, h_nVtx, h_nVtx_lumi, h_nVtx_lumi_all, h_nVtx_st, h_PVx, h_PVxz, h_PVy, h_PVyz, h_PVz, h_sigmaX0, h_sigmaY0, h_sigmaZ0, h_trk_z0, h_trkPt, h_trkVz, h_vx_dz, h_vx_vy, h_vy_dz, h_x0, h_y0, h_z0, timingPdfMaker::histo, hs, i, intervalInSec_, diffTwoXMLs::label, monitorName_, gen::n, nFitElements_, AlCaHLTBitMon_ParallelJobs::options, parameters_, pvResults, reportSummary, reportSummaryContents, reportSummaryMap, MonitorElement::setAxisTitle(), MonitorElement::setBinContent(), MonitorElement::setBinLabel(), and summaryContent_.

                            {
 
 
   // book some histograms here
   const int    dxBin = parameters_.getParameter<int>("dxBin");
   const double dxMin  = parameters_.getParameter<double>("dxMin");
   const double dxMax  = parameters_.getParameter<double>("dxMax");
 
   const int    vxBin = parameters_.getParameter<int>("vxBin");
   const double vxMin  = parameters_.getParameter<double>("vxMin");
   const double vxMax  = parameters_.getParameter<double>("vxMax");
 
   const int    phiBin = parameters_.getParameter<int>("phiBin");
   const double phiMin  = parameters_.getParameter<double>("phiMin");
   const double phiMax  = parameters_.getParameter<double>("phiMax");
 
   const int    dzBin = parameters_.getParameter<int>("dzBin");
   const double dzMin  = parameters_.getParameter<double>("dzMin");
   const double dzMax  = parameters_.getParameter<double>("dzMax");
 
   // create and cd into new folder
   dbe_->setCurrentFolder(monitorName_+"Fit");
 
   h_nTrk_lumi=dbe_->book1D("nTrk_lumi","Num. of selected tracks vs lumi (Fit)",20,0.5,20.5);
   h_nTrk_lumi->setAxisTitle("Lumisection",1);
   h_nTrk_lumi->setAxisTitle("Num of Tracks for Fit",2);
 
   //store vtx vs lumi for monitoring why fits fail
   h_nVtx_lumi=dbe_->book1D("nVtx_lumi","Num. of selected Vtx vs lumi (Fit)",20,0.5,20.5);
   h_nVtx_lumi->setAxisTitle("Lumisection",1);
   h_nVtx_lumi->setAxisTitle("Num of Vtx for Fit",2);
   
   h_nVtx_lumi_all=dbe_->book1D("nVtx_lumi_all","Num. of selected Vtx vs lumi (Fit) all",20,0.5,20.5);
   h_nVtx_lumi_all->getTH1()->SetCanExtend(TH1::kAllAxes);
   h_nVtx_lumi_all->setAxisTitle("Lumisection",1);
   h_nVtx_lumi_all->setAxisTitle("Num of Vtx for Fit",2);
 
   h_d0_phi0 = dbe_->bookProfile("d0_phi0","d_{0} vs. #phi_{0} (Selected Tracks)",phiBin,phiMin,phiMax,dxBin,dxMin,dxMax,"");
   h_d0_phi0->setAxisTitle("#phi_{0} (rad)",1);
   h_d0_phi0->setAxisTitle("d_{0} (cm)",2);
 
   h_vx_vy = dbe_->book2D("trk_vx_vy","Vertex (PCA) position of selected tracks",vxBin,vxMin,vxMax,vxBin,vxMin,vxMax);
   h_vx_vy->getTH2F()->SetOption("COLZ");
   //   h_vx_vy->getTH1()->SetCanExtend(TH1::kAllAxes);
   h_vx_vy->setAxisTitle("x coordinate of input track at PCA (cm)",1);
   h_vx_vy->setAxisTitle("y coordinate of input track at PCA (cm)",2);
 
   TDatime *da = new TDatime();
   gStyle->SetTimeOffset(da->Convert(kTRUE));
 
   const int nvar_ = 6;
   string coord[nvar_] = {"x","y","z","sigmaX","sigmaY","sigmaZ"};
   string label[nvar_] = {"x_{0} (cm)","y_{0} (cm)","z_{0} (cm)",
              "#sigma_{X_{0}} (cm)","#sigma_{Y_{0}} (cm)","#sigma_{Z_{0}} (cm)"};
   for (int i = 0; i < 4; i++) {
     dbe_->setCurrentFolder(monitorName_+"Fit");
     for (int ic=0; ic<nvar_; ++ic) {
       TString histName(coord[ic]);
       TString histTitle(coord[ic]);
       string ytitle(label[ic]);
       string xtitle("");
       string options("E1");
       bool createHisto = true;
       switch(i) {
       case 1: // BS vs time
     histName += "0_time";
     xtitle = "Time [UTC]";
     if (ic < 3)
       histTitle += " coordinate of beam spot vs time (Fit)";
     else
       histTitle = histTitle.Insert(5," ") + " of beam spot vs time (Fit)";
     break;
       case 2: // PV vs lumi
     if (ic < 3) {
       dbe_->setCurrentFolder(monitorName_+"PrimaryVertex");
       histName.Insert(0,"PV");
       histName += "_lumi";
       histTitle.Insert(0,"Avg. ");
       histTitle += " position of primary vtx vs lumi";
       xtitle = "Lumisection";
       ytitle.insert(0,"PV");
       ytitle += " #pm #sigma_{PV";
       ytitle += coord[ic];
       ytitle += "} (cm)";
     }
     else createHisto = false;
     break;
       case 3: // PV vs time
     if (ic < 3) {
       dbe_->setCurrentFolder(monitorName_+"PrimaryVertex");
       histName.Insert(0,"PV");
       histName += "_time";
       histTitle.Insert(0,"Avg. ");
       histTitle += " position of primary vtx vs time";
       xtitle = "Time [UTC]";
       ytitle.insert(0,"PV");
       ytitle += " #pm #sigma_{PV";
       ytitle += coord[ic];
       ytitle += "} (cm)";
     }
     else createHisto = false;
     break;
       default: // BS vs lumi
     histName += "0_lumi";
     xtitle = "Lumisection";
     if (ic < 3)
       histTitle += " coordinate of beam spot vs lumi (Fit)";
     else
       histTitle = histTitle.Insert(5," ") + " of beam spot vs lumi (Fit)";
     break;
       }
       if (createHisto) {
     edm::LogInfo("BeamMonitor") << "hitsName = " << histName << "; histTitle = " << histTitle << std::endl;
     hs[histName] = dbe_->book1D(histName,histTitle,40,0.5,40.5);
     hs[histName]->setAxisTitle(xtitle,1);
     hs[histName]->setAxisTitle(ytitle,2);
     hs[histName]->getTH1()->SetOption("E1");
     if (histName.Contains("time")) {
       //int nbins = (intervalInSec_/23 > 0 ? intervalInSec_/23 : 40);
       hs[histName]->getTH1()->SetBins(intervalInSec_,0.5,intervalInSec_+0.5);
       hs[histName]->setAxisTimeDisplay(1);
       hs[histName]->setAxisTimeFormat("%H:%M:%S",1);
     }
     histName += "_all";
     histTitle += " all";
     hs[histName] = dbe_->book1D(histName,histTitle,40,0.5,40.5);
     hs[histName]->getTH1()->SetCanExtend(TH1::kAllAxes);
     hs[histName]->setAxisTitle(xtitle,1);
     hs[histName]->setAxisTitle(ytitle,2);
     hs[histName]->getTH1()->SetOption("E1");
     if (histName.Contains("time")) {
       //int nbins = (intervalInSec_/23 > 0 ? intervalInSec_/23 : 40);
       hs[histName]->getTH1()->SetBins(intervalInSec_,0.5,intervalInSec_+0.5);
       hs[histName]->setAxisTimeDisplay(1);
       hs[histName]->setAxisTimeFormat("%H:%M:%S",1);
     }
       }
     }
   }
   dbe_->setCurrentFolder(monitorName_+"Fit");
 
   h_trk_z0 = dbe_->book1D("trk_z0","z_{0} of selected tracks",dzBin,dzMin,dzMax);
   h_trk_z0->setAxisTitle("z_{0} of selected tracks (cm)",1);
 
   h_vx_dz = dbe_->bookProfile("vx_dz","v_{x} vs. dz of selected tracks",dzBin,dzMin,dzMax,dxBin,dxMin,dxMax,"");
   h_vx_dz->setAxisTitle("dz (cm)",1);
   h_vx_dz->setAxisTitle("x coordinate of input track at PCA (cm)",2);
 
   h_vy_dz = dbe_->bookProfile("vy_dz","v_{y} vs. dz of selected tracks",dzBin,dzMin,dzMax,dxBin,dxMin,dxMax,"");
   h_vy_dz->setAxisTitle("dz (cm)",1);
   h_vy_dz->setAxisTitle("y coordinate of input track at PCA (cm)",2);
 
   h_x0 = dbe_->book1D("BeamMonitorFeedBack_x0","x coordinate of beam spot (Fit)",100,-0.01,0.01);
   h_x0->setAxisTitle("x_{0} (cm)",1);
   h_x0->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_y0 = dbe_->book1D("BeamMonitorFeedBack_y0","y coordinate of beam spot (Fit)",100,-0.01,0.01);
   h_y0->setAxisTitle("y_{0} (cm)",1);
   h_y0->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_z0 = dbe_->book1D("BeamMonitorFeedBack_z0","z coordinate of beam spot (Fit)",dzBin,dzMin,dzMax);
   h_z0->setAxisTitle("z_{0} (cm)",1);
   h_z0->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_sigmaX0 = dbe_->book1D("BeamMonitorFeedBack_sigmaX0","sigma x0 of beam spot (Fit)",100,0,0.05);
   h_sigmaX0->setAxisTitle("#sigma_{X_{0}} (cm)",1);
   h_sigmaX0->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_sigmaY0 = dbe_->book1D("BeamMonitorFeedBack_sigmaY0","sigma y0 of beam spot (Fit)",100,0,0.05);
   h_sigmaY0->setAxisTitle("#sigma_{Y_{0}} (cm)",1);
   h_sigmaY0->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_sigmaZ0 = dbe_->book1D("BeamMonitorFeedBack_sigmaZ0","sigma z0 of beam spot (Fit)",100,0,10);
   h_sigmaZ0->setAxisTitle("#sigma_{Z_{0}} (cm)",1);
   h_sigmaZ0->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   // Histograms of all reco tracks (without cuts):
   h_trkPt=dbe_->book1D("trkPt","p_{T} of all reco'd tracks (no selection)",200,0.,50.);
   h_trkPt->setAxisTitle("p_{T} (GeV/c)",1);
 
   h_trkVz=dbe_->book1D("trkVz","Z coordinate of PCA of all reco'd tracks (no selection)",dzBin,dzMin,dzMax);
   h_trkVz->setAxisTitle("V_{Z} (cm)",1);
 
   cutFlowTable = dbe_->book1D("cutFlowTable","Cut flow table of track selection", 9, 0, 9 );
 
   // Results of previous good fit:
   fitResults=dbe_->book2D("fitResults","Results of previous good beam fit",2,0,2,8,0,8);
   fitResults->setAxisTitle("Fitted Beam Spot (cm)",1);
   fitResults->setBinLabel(8,"x_{0}",2);
   fitResults->setBinLabel(7,"y_{0}",2);
   fitResults->setBinLabel(6,"z_{0}",2);
   fitResults->setBinLabel(5,"#sigma_{Z}",2);
   fitResults->setBinLabel(4,"#frac{dx}{dz} (rad)",2);
   fitResults->setBinLabel(3,"#frac{dy}{dz} (rad)",2);
   fitResults->setBinLabel(2,"#sigma_{X}",2);
   fitResults->setBinLabel(1,"#sigma_{Y}",2);
   fitResults->setBinLabel(1,"Mean",1);
   fitResults->setBinLabel(2,"Stat. Error",1);
   fitResults->getTH1()->SetOption("text");
 
   // Histos of PrimaryVertices:
   dbe_->setCurrentFolder(monitorName_+"PrimaryVertex");
 
   h_nVtx = dbe_->book1D("vtxNbr","Reconstructed Vertices(non-fake) in all Event",60,-0.5,59.5);
   h_nVtx->setAxisTitle("Num. of reco. vertices",1);
   
   //For one Trigger only
   h_nVtx_st = dbe_->book1D("vtxNbr_SelectedTriggers","Reconstructed Vertices(non-fake) in Events",60,-0.5,59.5);
   //h_nVtx_st->setAxisTitle("Num. of reco. vertices for Un-Prescaled Jet Trigger",1);
 
   // Monitor only the PV with highest sum pt of assoc. trks:
   h_PVx[0] = dbe_->book1D("PVX","x coordinate of Primary Vtx",50,-0.01,0.01);
   h_PVx[0]->setAxisTitle("PVx (cm)",1);
   h_PVx[0]->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_PVy[0] = dbe_->book1D("PVY","y coordinate of Primary Vtx",50,-0.01,0.01);
   h_PVy[0]->setAxisTitle("PVy (cm)",1);
   h_PVy[0]->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_PVz[0] = dbe_->book1D("PVZ","z coordinate of Primary Vtx",dzBin,dzMin,dzMax);
   h_PVz[0]->setAxisTitle("PVz (cm)",1);
 
   h_PVx[1] = dbe_->book1D("PVXFit","x coordinate of Primary Vtx (Last Fit)",50,-0.01,0.01);
   h_PVx[1]->setAxisTitle("PVx (cm)",1);
   h_PVx[1]->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_PVy[1] = dbe_->book1D("PVYFit","y coordinate of Primary Vtx (Last Fit)",50,-0.01,0.01);
   h_PVy[1]->setAxisTitle("PVy (cm)",1);
   h_PVy[1]->getTH1()->SetCanExtend(TH1::kAllAxes);
 
   h_PVz[1] = dbe_->book1D("PVZFit","z coordinate of Primary Vtx (Last Fit)",dzBin,dzMin,dzMax);
   h_PVz[1]->setAxisTitle("PVz (cm)",1);
 
   h_PVxz = dbe_->bookProfile("PVxz","PVx vs. PVz",dzBin/2,dzMin,dzMax,dxBin/2,dxMin,dxMax,"");
   h_PVxz->setAxisTitle("PVz (cm)",1);
   h_PVxz->setAxisTitle("PVx (cm)",2);
 
   h_PVyz = dbe_->bookProfile("PVyz","PVy vs. PVz",dzBin/2,dzMin,dzMax,dxBin/2,dxMin,dxMax,"");
   h_PVyz->setAxisTitle("PVz (cm)",1);
   h_PVyz->setAxisTitle("PVy (cm)",2);
 
   // Results of previous good fit:
   pvResults=dbe_->book2D("pvResults","Results of fitting Primary Vertices",2,0,2,6,0,6);
   pvResults->setAxisTitle("Fitted Primary Vertex (cm)",1);
   pvResults->setBinLabel(6,"PVx",2);
   pvResults->setBinLabel(5,"PVy",2);
   pvResults->setBinLabel(4,"PVz",2);
   pvResults->setBinLabel(3,"#sigma_{X}",2);
   pvResults->setBinLabel(2,"#sigma_{Y}",2);
   pvResults->setBinLabel(1,"#sigma_{Z}",2);
   pvResults->setBinLabel(1,"Mean",1);
   pvResults->setBinLabel(2,"Stat. Error",1);
   pvResults->getTH1()->SetOption("text");
 
   // Summary plots:
   dbe_->setCurrentFolder(monitorName_+"EventInfo");
   reportSummary = dbe_->get(monitorName_+"EventInfo/reportSummary");
   if (reportSummary) dbe_->removeElement(reportSummary->getName());
 
   reportSummary = dbe_->bookFloat("reportSummary");
   if(reportSummary) reportSummary->Fill(std::numeric_limits<double>::quiet_NaN());
 
   char histo[20];
   dbe_->setCurrentFolder(monitorName_+"EventInfo/reportSummaryContents");
   for (int n = 0; n < nFitElements_; n++) {
     switch(n){
     case 0 : sprintf(histo,"x0_status"); break;
     case 1 : sprintf(histo,"y0_status"); break;
     case 2 : sprintf(histo,"z0_status"); break;
     }
     reportSummaryContents[n] = dbe_->bookFloat(histo);
   }
 
   for (int i = 0; i < nFitElements_; i++) {
     summaryContent_[i] = 0.;
     reportSummaryContents[i]->Fill(std::numeric_limits<double>::quiet_NaN());
   }
 
   dbe_->setCurrentFolder(monitorName_+"EventInfo");
 
   reportSummaryMap = dbe_->get(monitorName_+"EventInfo/reportSummaryMap");
   if (reportSummaryMap) dbe_->removeElement(reportSummaryMap->getName());
 
   reportSummaryMap = dbe_->book2D("reportSummaryMap", "Beam Spot Summary Map", 1, 0, 1, 3, 0, 3);
   reportSummaryMap->setAxisTitle("",1);
   reportSummaryMap->setAxisTitle("Fitted Beam Spot",2);
   reportSummaryMap->setBinLabel(1," ",1);
   reportSummaryMap->setBinLabel(1,"x_{0}",2);
   reportSummaryMap->setBinLabel(2,"y_{0}",2);
   reportSummaryMap->setBinLabel(3,"z_{0}",2);
   for (int i = 0; i < nFitElements_; i++) {
     reportSummaryMap->setBinContent(1,i+1,-1.);
   }
 }

void BeamMonitor::beginLuminosityBlock	(	const edm::LuminosityBlock &	lumiSeg,
		const edm::EventSetup &	context
	)

protectedvirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 446 of file BeamMonitor.cc.

References beginLumiOfBSFit_, beginLumiOfPVFit_, edm::LuminosityBlockBase::beginTime(), countLumi_, debug_, FitAndFill(), lastlumi_, edm::LuminosityBlockBase::luminosityBlock(), mapBeginBSLS, mapBeginBSTime, mapBeginPVLS, mapBeginPVTime, nextlumi_, onlineMode_, processed_, refBStime, refPVtime, StartAverage_, and edm::Timestamp::value().

                                                   {
   int nthlumi = lumiSeg.luminosityBlock();
   const edm::TimeValue_t fbegintimestamp = lumiSeg.beginTime().value();
   const std::time_t ftmptime = fbegintimestamp >> 32;
 
 
  if (countLumi_ == 0 && (!processed_)) {
     beginLumiOfBSFit_ = beginLumiOfPVFit_ = nthlumi;
     refBStime[0] = refPVtime[0] = ftmptime;
     mapBeginBSLS[countLumi_]   = nthlumi;
     mapBeginPVLS[countLumi_]   = nthlumi;
     mapBeginBSTime[countLumi_] = ftmptime;
     mapBeginPVTime[countLumi_] = ftmptime;
     }//for the first record
 
 if(nthlumi > nextlumi_){
    if(processed_){ countLumi_++;
     //store here them will need when we remove the first one of Last N LS
     mapBeginBSLS[countLumi_]   = nthlumi;
     mapBeginPVLS[countLumi_]   = nthlumi;
     mapBeginBSTime[countLumi_] = ftmptime;
     mapBeginPVTime[countLumi_] = ftmptime;
    }//processed passed but not the first lumi
    if((!processed_) && countLumi_ !=0){
        mapBeginBSLS[countLumi_]   = nthlumi;
        mapBeginPVLS[countLumi_]   = nthlumi;
        mapBeginBSTime[countLumi_] = ftmptime;
        mapBeginPVTime[countLumi_] = ftmptime;
    }//processed fails for last lumi
   }//nthLumi > nextlumi
 
 
    if(StartAverage_ ){
      //Just Make sure it get rest
      refBStime[0] =0;
      refPVtime[0] =0;
      beginLumiOfPVFit_ =0;
      beginLumiOfBSFit_ =0;
 
      if(debug_)edm::LogInfo("BeamMonitor") << " beginLuminosityBlock:  Size of mapBeginBSLS before =  "<< mapBeginBSLS.size()<<endl;
      if(nthlumi> nextlumi_){ //this make sure that it does not take into account this lumi for fitting and only look forward for new lumi
                              //as countLumi also remains the same so map value  get overwritten once return to normal running.
      //even if few LS are misssing and DQM module do not sees them then it catchs up again
      map<int, int>::iterator itbs=mapBeginBSLS.begin();
      map<int, int>::iterator itpv=mapBeginPVLS.begin();
      map<int, std::time_t>::iterator itbstime=mapBeginBSTime.begin();
      map<int, std::time_t>::iterator itpvtime=mapBeginPVTime.begin();
 
     if(processed_){// otherwise if false then LS range of fit get messed up because we don't remove trk/pvs but we remove LS begin value . This prevent it as it happened if LS is there but no event are processed for some reason
      mapBeginBSLS.erase(itbs);
      mapBeginPVLS.erase(itpv);
      mapBeginBSTime.erase(itbstime);
      mapBeginPVTime.erase(itpvtime);
      } 
             /*//not sure if want this or not ??
             map<int, int>::iterator itgapb=mapBeginBSLS.begin();
             map<int, int>::iterator itgape=mapBeginBSLS.end(); itgape--;
             countGapLumi_ = ( (itgape->second) - (itgapb->second) );
             //if we see Gap more than then 2*resetNFitLumi !!!!!!!
             //for example if 10-15 is fitted and if 16-25 are missing then we next fit will be for range 11-26 but BS can change in between
             // so better start  as fresh  and reset everything like starting in the begining!
             if(countGapLumi_ >= 2*resetFitNLumi_){RestartFitting(); mapBeginBSLS[countLumi_]   = nthlumi;}
             */
      }
 
     if(debug_) edm::LogInfo("BeamMonitor") << " beginLuminosityBlock::  Size of mapBeginBSLS After = "<< mapBeginBSLS.size()<<endl;
 
      map<int, int>::iterator  bbs = mapBeginBSLS.begin();
      map<int, int>::iterator  bpv = mapBeginPVLS.begin();
      map<int, std::time_t>::iterator bbst = mapBeginBSTime.begin();
      map<int, std::time_t>::iterator bpvt = mapBeginPVTime.begin();
 
 
      if (beginLumiOfPVFit_ == 0) beginLumiOfPVFit_ = bpv->second;     //new begin time after removing the LS
      if (beginLumiOfBSFit_ == 0) beginLumiOfBSFit_ = bbs->second;
      if (refBStime[0] == 0) refBStime[0] = bbst->second;
      if (refPVtime[0] == 0) refPVtime[0] = bpvt->second;
 
     }//same logic for average fit as above commented line
 
 
     map<int, std::time_t>::iterator nbbst = mapBeginBSTime.begin();
     map<int, std::time_t>::iterator nbpvt = mapBeginPVTime.begin();
 
 
   if (onlineMode_ && (nthlumi < nextlumi_)) return;
 
   if (onlineMode_) {
     if (nthlumi > nextlumi_) {
       if (countLumi_ != 0 && processed_) FitAndFill(lumiSeg,lastlumi_,nextlumi_,nthlumi);
       nextlumi_ = nthlumi;
       edm::LogInfo("BeamMonitor") << "beginLuminosityBlock:: Next Lumi to Fit: " << nextlumi_ << endl;
       if((StartAverage_) && refBStime[0] == 0) refBStime[0] = nbbst->second;
       if((StartAverage_) && refPVtime[0] == 0) refPVtime[0] = nbpvt->second;
     }
   }
   else{
     if (processed_) FitAndFill(lumiSeg,lastlumi_,nextlumi_,nthlumi);
     nextlumi_ = nthlumi;
     edm::LogInfo("BeamMonitor") << " beginLuminosityBlock:: Next Lumi to Fit: " << nextlumi_ << endl;
     if ((StartAverage_) && refBStime[0] == 0) refBStime[0] = nbbst->second;
     if ((StartAverage_) && refPVtime[0] == 0) refPVtime[0] = nbpvt->second;
   }
 
   //countLumi_++;
   if (processed_) processed_ = false;
   edm::LogInfo("BeamMonitor") << " beginLuminosityBlock::  Begin of Lumi: " << nthlumi << endl;
 }

void BeamMonitor::beginRun	(	const edm::Run &	r,
		const edm::EventSetup &	c
	)

protectedvirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 424 of file BeamMonitor.cc.

References edm::RunBase::beginTime(), gather_cfg::cout, pyrootRender::da, debug_, formatFitTime(), frun, ftimestamp, hs, refTime, edm::RunBase::run(), startTime, tmpTime, and edm::Timestamp::value().

                                                                      {
 
   frun = r.run();
   ftimestamp = r.beginTime().value();
   tmpTime = ftimestamp >> 32;
   startTime = refTime =  tmpTime;
   char eventTime[64];
   formatFitTime(eventTime, tmpTime);
   std::cout << "TimeOffset = " << eventTime << std::endl;
   TDatime da(eventTime);
   if (debug_) {
     edm::LogInfo("BeamMonitor") << "TimeOffset = ";
     da.Print();
   }
   for (std::map<TString,MonitorElement*>::iterator it = hs.begin();
        it != hs.end(); ++it) {
     if ((*it).first.Contains("time"))
       (*it).second->getTH1()->GetXaxis()->SetTimeOffset(da.Convert(kTRUE));
   }
 }

void BeamMonitor::endJob	(	const edm::LuminosityBlock &	lumiSeg,
		const edm::EventSetup &	c
	)

protected

Definition at line 1374 of file BeamMonitor.cc.

References endLuminosityBlock(), and onlineMode_.

                                       {
   if (!onlineMode_) endLuminosityBlock(lumiSeg, iSetup);
 }

void BeamMonitor::endLuminosityBlock	(	const edm::LuminosityBlock &	lumiSeg,
		const edm::EventSetup &	c
	)

protectedvirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 695 of file BeamMonitor.cc.

References edm::LuminosityBlockBase::endTime(), edm::LuminosityBlockBase::id(), edm::LuminosityBlockID::luminosityBlock(), nextlumi_, onlineMode_, refBStime, refPVtime, tmpTime, and edm::Timestamp::value().

Referenced by endJob().

                                                {
   int nthlumi = lumiSeg.id().luminosityBlock();
   edm::LogInfo("BeamMonitor") << "endLuminosityBlock:: Lumi of the last event before endLuminosityBlock: " << nthlumi << endl;
 
   if (onlineMode_ && nthlumi < nextlumi_) return;
   const edm::TimeValue_t fendtimestamp = lumiSeg.endTime().value();
   const std::time_t fendtime = fendtimestamp >> 32;
   tmpTime = refBStime[1] = refPVtime[1] = fendtime;
 }

void BeamMonitor::endRun	(	const edm::Run &	r,
		const edm::EventSetup &	c
	)

protectedvirtual

Reimplemented from edm::EDAnalyzer.

Definition at line 1354 of file BeamMonitor.cc.

References debug_, mapBeginBSLS, mapBeginBSTime, mapBeginPVLS, mapBeginPVTime, mapLSBSTrkSize, mapLSCF, mapLSPVStoreSize, mapNPV, mapPVx, mapPVy, and mapPVz.

                                                                {
 
 if(debug_)edm::LogInfo("BeamMonitor") << "endRun:: Clearing all the Maps "<<endl;
 //Clear all the Maps here
 mapPVx.clear();
 mapPVy.clear();
 mapPVz.clear();
 mapNPV.clear();
 mapBeginBSLS.clear();
 mapBeginPVLS.clear();
 mapBeginBSTime.clear();
 mapBeginPVTime.clear();
 mapLSBSTrkSize.clear();
 mapLSPVStoreSize.clear();
 mapLSCF.clear();
 
 
 }

void BeamMonitor::FitAndFill	(	const edm::LuminosityBlock &	lumiSeg,
		int &	lastlumi,
		int &	nextlumi,
		int &	nthlumi
	)

private

Definition at line 707 of file BeamMonitor.cc.

References alpha, reco::BeamSpot::BeamWidthX(), reco::BeamSpot::BeamWidthXError(), reco::BeamSpot::BeamWidthY(), reco::BeamSpot::BeamWidthYError(), begin, beginLumiOfBSFit_, beginLumiOfPVFit_, countLumi_, dbe_, debug_, reco::BeamSpot::dxdz(), reco::BeamSpot::dxdzError(), reco::BeamSpot::dydz(), reco::BeamSpot::dydzError(), end, endLumiOfBSFit_, endLumiOfPVFit_, validate-o2o-wbm::f1, MonitorElement::Fill(), firstAverageFit_, fitNLumi_, fitPVNLumi_, fitResults, frun, BeamFitter::getBeamSpot(), BeamFitter::getBSvector(), BeamFitter::getCutFlow(), BeamFitter::getFitLSRange(), MonitorElement::getMean(), MonitorElement::getMeanError(), MonitorElement::getName(), BeamFitter::getPVvectorSize(), BeamFitter::getRefTime(), MonitorElement::getRMS(), MonitorElement::getRMSError(), BeamFitter::getRunNumber(), MonitorElement::getTH1(), getTH1F(), MonitorElement::getTProfile(), h_d0_phi0, h_nTrk_lumi, h_nVtx_lumi, h_nVtx_lumi_all, h_nVtx_st, h_PVx, h_PVy, h_PVz, h_sigmaX0, h_sigmaY0, h_sigmaZ0, h_trk_z0, h_vx_dz, h_vx_vy, h_vy_dz, h_x0, h_y0, h_z0, hs, i, cuy::ii, mapLSBSTrkSize, mapLSCF, mapLSPVStoreSize, mapNPV, mapPVx, mapPVy, mapPVz, timingPdfMaker::mean, min_Ntrks_, minNrVertices_, monitorName_, gen::n, nFitElements_, nFits_, nthBSTrk_, onlineMode_, preBS, processed_, pvResults, refBStime, refPVtime, refTime, reportSummary, reportSummary_, reportSummaryContents, reportSummaryMap, MonitorElement::Reset(), resetFitNLumi_, resetHistos_, resetPVNLumi_, BeamFitter::resizeBSvector(), BeamFitter::resizePVvector(), BeamFitter::runPVandTrkFitter(), scrollTH1(), MonitorElement::setAxisTitle(), MonitorElement::setBinContent(), BeamFitter::setFitLSRange(), BeamFitter::SetPVInfo(), BeamFitter::setRefTime(), BeamFitter::setRun(), MonitorElement::ShiftFillLast(), reco::BeamSpot::sigmaZ(), reco::BeamSpot::sigmaZ0Error(), mathSSE::sqrt(), StartAverage_, startTime, BeamFitter::subtractFromCutFlow(), summaryContent_, summarySum_, testScroll(), theBeamFitter, createPayload::tmpfile, tmpTime, reco::BeamSpot::type(), MonitorElement::update(), create_public_lumi_plots::width, reco::BeamSpot::x0(), reco::BeamSpot::x0Error(), reco::BeamSpot::y0(), reco::BeamSpot::y0Error(), reco::BeamSpot::z0(), and reco::BeamSpot::z0Error().

Referenced by beginLuminosityBlock().

                                                                                                    {
   if (onlineMode_ && (nthlumi <= nextlumi)) return;
 
   //set the correct run number when no event in the LS for fake output
   if((processed_) && theBeamFitter->getRunNumber() != frun)theBeamFitter->setRun(frun);
 
   int currentlumi = nextlumi;
   edm::LogInfo("BeamMonitor") << "FitAndFill::  Lumi of the current fit: " << currentlumi << endl;
   lastlumi = currentlumi;
   endLumiOfBSFit_ = currentlumi;
   endLumiOfPVFit_ = currentlumi;
 
 
      //---------Fix for Runninv average-------------
       mapLSPVStoreSize[countLumi_]= theBeamFitter->getPVvectorSize();
 
       if(StartAverage_)
       {
         std::map<int, std::size_t>::iterator rmLSPVi = mapLSPVStoreSize.begin();
         size_t SizeToRemovePV= rmLSPVi->second;
         for(std::map<int, std::size_t>::iterator rmLSPVe = mapLSPVStoreSize.end(); ++rmLSPVi != rmLSPVe;)
           rmLSPVi->second  -= SizeToRemovePV;
 
       theBeamFitter->resizePVvector(SizeToRemovePV);
 
       map<int, std::size_t >::iterator tmpItpv=mapLSPVStoreSize.begin();
       mapLSPVStoreSize.erase(tmpItpv);
       }
       if(debug_)edm::LogInfo("BeamMonitor") << "FitAndFill:: Size of thePVvector After removing the PVs = " << theBeamFitter->getPVvectorSize()<<endl;
 
 
       //lets filt the PV for GUI here: It was in analyzer in preivous versiton but moved here due to absence of event in some lumis, works OK
       bool resetHistoFlag_=false;
       if((int)mapPVx.size() >= resetFitNLumi_ && (StartAverage_)){
       h_PVx[0]->Reset();
       h_PVy[0]->Reset();
       h_PVz[0]->Reset();
       h_nVtx_st->Reset();
       resetHistoFlag_ = true;
       }
 
       int MaxPVs = 0;
       int countEvtLastNLS_=0;
       int countTotPV_= 0;      
 
       std::map< int, std::vector<int> >::iterator mnpv=mapNPV.begin();
       std::map< int, std::vector<float> >::iterator mpv2=mapPVy.begin();
       std::map< int, std::vector<float> >::iterator mpv3=mapPVz.begin();
 
      for(std::map< int, std::vector<float> >::iterator mpv1=mapPVx.begin(); mpv1 != mapPVx.end(); ++mpv1, ++mpv2, ++mpv3, ++mnpv)
      {
         std::vector<float>::iterator mpvs2 = (mpv2->second).begin();
         std::vector<float>::iterator mpvs3 = (mpv3->second).begin();
       for(std::vector<float>::iterator mpvs1=(mpv1->second).begin(); mpvs1 !=(mpv1->second).end(); ++mpvs1, ++mpvs2, ++mpvs3){
         if(resetHistoFlag_)
             {h_PVx[0]->Fill( *mpvs1 ); //these histogram are reset after StartAverage_ flag is ON
              h_PVy[0]->Fill( *mpvs2 );
              h_PVz[0]->Fill( *mpvs3 );
             }
         }//loop over second 
    
        //Do the same here for nPV distr.
       for(std::vector<int>::iterator mnpvs = (mnpv->second).begin(); mnpvs != (mnpv->second).end(); ++mnpvs){
         if((*mnpvs > 0) && (resetHistoFlag_) )h_nVtx_st->Fill( (*mnpvs)*(1.0) );
          countEvtLastNLS_++;
          countTotPV_ += (*mnpvs);  
         if((*mnpvs) > MaxPVs) MaxPVs =  (*mnpvs);
        }//loop over second of mapNPV
 
      }//loop over last N lumis
 
      char tmpTitlePV[100];               
      sprintf(tmpTitlePV,"%s %i %s %i","Num. of reco. vertices for LS: ",beginLumiOfPVFit_," to ",endLumiOfPVFit_);   
      h_nVtx_st->setAxisTitle(tmpTitlePV,1);
 
      std::vector<float> DipPVInfo_;
      DipPVInfo_.clear();
 
    if(countTotPV_ != 0 ){
      DipPVInfo_.push_back((float)countEvtLastNLS_);
      DipPVInfo_.push_back(h_nVtx_st->getMean());
      DipPVInfo_.push_back(h_nVtx_st->getMeanError());
      DipPVInfo_.push_back(h_nVtx_st->getRMS());
      DipPVInfo_.push_back(h_nVtx_st->getRMSError());
      DipPVInfo_.push_back((float)MaxPVs);
      DipPVInfo_.push_back((float)countTotPV_);
      MaxPVs =0;
     }
    else{ for(size_t i= 0; i < 7; i++){if(i>0)DipPVInfo_.push_back(0.);
                                       else DipPVInfo_.push_back((float)countEvtLastNLS_);}
        }
      theBeamFitter->SetPVInfo(DipPVInfo_);      
      countEvtLastNLS_=0;
 
 
 
   if (onlineMode_) { // filling LS gap
     // FIXME: need to add protection for the case if the gap is at the resetting LS!
     const int countLS_bs = hs["x0_lumi"]->getTH1()->GetEntries();
     const int countLS_pv = hs["PVx_lumi"]->getTH1()->GetEntries();
     edm::LogInfo("BeamMonitor") << "FitAndFill:: countLS_bs = " << countLS_bs << " ; countLS_pv = " << countLS_pv << std::endl;
     int LSgap_bs = currentlumi/fitNLumi_ - countLS_bs;
     int LSgap_pv = currentlumi/fitPVNLumi_ - countLS_pv;
     if (currentlumi%fitNLumi_ == 0)
       LSgap_bs--;
     if (currentlumi%fitPVNLumi_ == 0)
       LSgap_pv--;
     edm::LogInfo("BeamMonitor") << "FitAndFill::  LSgap_bs = " << LSgap_bs << " ; LSgap_pv = " << LSgap_pv << std::endl;
     // filling previous fits if LS gap ever exists
     for (int ig = 0; ig < LSgap_bs; ig++) {
       hs["x0_lumi"]->ShiftFillLast( 0., 0., fitNLumi_ );//x0 , x0err, fitNLumi_;  see DQMCore....
       hs["y0_lumi"]->ShiftFillLast( 0., 0., fitNLumi_ );
       hs["z0_lumi"]->ShiftFillLast( 0., 0., fitNLumi_ );
       hs["sigmaX0_lumi"]->ShiftFillLast( 0., 0., fitNLumi_ );
       hs["sigmaY0_lumi"]->ShiftFillLast( 0., 0., fitNLumi_ );
       hs["sigmaZ0_lumi"]->ShiftFillLast( 0., 0., fitNLumi_ );
       h_nVtx_lumi->ShiftFillLast( 0., 0., fitNLumi_ );
     }
     for (int ig = 0; ig < LSgap_pv; ig++) {
       hs["PVx_lumi"]->ShiftFillLast( 0., 0., fitPVNLumi_ );
       hs["PVy_lumi"]->ShiftFillLast( 0., 0., fitPVNLumi_ );
       hs["PVz_lumi"]->ShiftFillLast( 0., 0., fitPVNLumi_ );
     }
     const int previousLS = h_nTrk_lumi->getTH1()->GetEntries();
     for (int i=1;i < (currentlumi - previousLS);i++)//if (current-previoius)= 1 then never go inside the for loop!!!!!!!!!!!
       h_nTrk_lumi->ShiftFillLast(nthBSTrk_);
   }
 
   edm::LogInfo("BeamMonitor") << "FitAndFill:: Time lapsed since last scroll = " << tmpTime - refTime << std:: endl;
 
   if (testScroll(tmpTime,refTime)) {
     scrollTH1(hs["x0_time"]->getTH1(),refTime);
     scrollTH1(hs["y0_time"]->getTH1(),refTime);
     scrollTH1(hs["z0_time"]->getTH1(),refTime);
     scrollTH1(hs["sigmaX0_time"]->getTH1(),refTime);
     scrollTH1(hs["sigmaY0_time"]->getTH1(),refTime);
     scrollTH1(hs["sigmaZ0_time"]->getTH1(),refTime);
     scrollTH1(hs["PVx_time"]->getTH1(),refTime);
     scrollTH1(hs["PVy_time"]->getTH1(),refTime);
     scrollTH1(hs["PVz_time"]->getTH1(),refTime);
   }
 
   bool doPVFit = false;
 
   if (fitPVNLumi_ > 0) {
     if (onlineMode_) {
       if (currentlumi%fitPVNLumi_ == 0)
     doPVFit = true;
     }
     else
       if (countLumi_%fitPVNLumi_ == 0)
     doPVFit = true;
   }
   else
     doPVFit = true;
 
 
   if (doPVFit) {
     edm::LogInfo("BeamMonitor") << "FitAndFill:: Do PV Fitting for LS = " << beginLumiOfPVFit_ << " to " << endLumiOfPVFit_ << std::endl;
     // Primary Vertex Fit:
     if (h_PVx[0]->getTH1()->GetEntries() > minNrVertices_) {
 
       pvResults->Reset();
       char tmpTitle[50];
       sprintf(tmpTitle,"%s %i %s %i","Fitted Primary Vertex (cm) of LS: ",beginLumiOfPVFit_," to ",endLumiOfPVFit_);
       pvResults->setAxisTitle(tmpTitle,1);
 
       std::unique_ptr<TF1> fgaus{ new TF1("fgaus","gaus") };
       double mean,width,meanErr,widthErr;
       fgaus->SetLineColor(4);
       h_PVx[0]->getTH1()->Fit(fgaus.get(),"QLM0");
       mean = fgaus->GetParameter(1);
       width = fgaus->GetParameter(2);
       meanErr = fgaus->GetParError(1);
       widthErr = fgaus->GetParError(2);
 
 
       hs["PVx_lumi"]->ShiftFillLast(mean,width,fitPVNLumi_);
       hs["PVx_lumi_all"]->setBinContent(currentlumi,mean);
       hs["PVx_lumi_all"]->setBinError(currentlumi,width);
       int nthBin = tmpTime - refTime;
       if (nthBin < 0)
     edm::LogInfo("BeamMonitor") << "FitAndFill::  Event time outside current range of time histograms!" << std::endl;
       if (nthBin > 0) {
     hs["PVx_time"]->setBinContent(nthBin,mean);
     hs["PVx_time"]->setBinError(nthBin,width);
       }
       int jthBin = tmpTime - startTime;
       if (jthBin > 0) {
     hs["PVx_time_all"]->setBinContent(jthBin,mean);
     hs["PVx_time_all"]->setBinError(jthBin,width);
       }
       pvResults->setBinContent(1,6,mean);
       pvResults->setBinContent(1,3,width);
       pvResults->setBinContent(2,6,meanErr);
       pvResults->setBinContent(2,3,widthErr);
 
       dbe_->setCurrentFolder(monitorName_+"PrimaryVertex/");
       const char* tmpfile;
       TH1D * tmphisto;
       // snap shot of the fit
       tmpfile= (h_PVx[1]->getName()).c_str();
       tmphisto = static_cast<TH1D *>((h_PVx[0]->getTH1())->Clone("tmphisto"));
       h_PVx[1]->getTH1()->SetBins(tmphisto->GetNbinsX(),tmphisto->GetXaxis()->GetXmin(),tmphisto->GetXaxis()->GetXmax());
       h_PVx[1] = dbe_->book1D(tmpfile,h_PVx[0]->getTH1F());
       h_PVx[1]->getTH1()->Fit(fgaus.get(),"QLM");
 
 
       h_PVy[0]->getTH1()->Fit(fgaus.get(),"QLM0");
       mean = fgaus->GetParameter(1);
       width = fgaus->GetParameter(2);
       meanErr = fgaus->GetParError(1);
       widthErr = fgaus->GetParError(2);
       hs["PVy_lumi"]->ShiftFillLast(mean,width,fitPVNLumi_);
       hs["PVy_lumi_all"]->setBinContent(currentlumi,mean);
       hs["PVy_lumi_all"]->setBinError(currentlumi,width);
       if (nthBin > 0) {
     hs["PVy_time"]->setBinContent(nthBin,mean);
     hs["PVy_time"]->setBinError(nthBin,width);
       }
       if (jthBin > 0) {
     hs["PVy_time_all"]->setBinContent(jthBin,mean);
     hs["PVy_time_all"]->setBinError(jthBin,width);
       }
       pvResults->setBinContent(1,5,mean);
       pvResults->setBinContent(1,2,width);
       pvResults->setBinContent(2,5,meanErr);
       pvResults->setBinContent(2,2,widthErr);
       // snap shot of the fit
       tmpfile= (h_PVy[1]->getName()).c_str();
       tmphisto = static_cast<TH1D *>((h_PVy[0]->getTH1())->Clone("tmphisto"));
       h_PVy[1]->getTH1()->SetBins(tmphisto->GetNbinsX(),tmphisto->GetXaxis()->GetXmin(),tmphisto->GetXaxis()->GetXmax());
       h_PVy[1]->update();
       h_PVy[1] = dbe_->book1D(tmpfile,h_PVy[0]->getTH1F());
       h_PVy[1]->getTH1()->Fit(fgaus.get(),"QLM");
 
 
       h_PVz[0]->getTH1()->Fit(fgaus.get(),"QLM0");
       mean = fgaus->GetParameter(1);
       width = fgaus->GetParameter(2);
       meanErr = fgaus->GetParError(1);
       widthErr = fgaus->GetParError(2);
       hs["PVz_lumi"]->ShiftFillLast(mean,width,fitPVNLumi_);
       hs["PVz_lumi_all"]->setBinContent(currentlumi,mean);
       hs["PVz_lumi_all"]->setBinError(currentlumi,width);
       if (nthBin > 0) {
     hs["PVz_time"]->setBinContent(nthBin,mean);
     hs["PVz_time"]->setBinError(nthBin,width);
       }
       if (jthBin > 0) {
     hs["PVz_time_all"]->setBinContent(jthBin,mean);
     hs["PVz_time_all"]->setBinError(jthBin,width);
       }
       pvResults->setBinContent(1,4,mean);
       pvResults->setBinContent(1,1,width);
       pvResults->setBinContent(2,4,meanErr);
       pvResults->setBinContent(2,1,widthErr);
       // snap shot of the fit
       tmpfile= (h_PVz[1]->getName()).c_str();
       tmphisto = static_cast<TH1D *>((h_PVz[0]->getTH1())->Clone("tmphisto"));
       h_PVz[1]->getTH1()->SetBins(tmphisto->GetNbinsX(),tmphisto->GetXaxis()->GetXmin(),tmphisto->GetXaxis()->GetXmax());
       h_PVz[1]->update();
       h_PVz[1] = dbe_->book1D(tmpfile,h_PVz[0]->getTH1F());
       h_PVz[1]->getTH1()->Fit(fgaus.get(),"QLM");
       delete tmphisto;
 
     }//check if found min Vertices
   }//do PVfit
 
   if ((resetPVNLumi_ > 0 && countLumi_ == resetPVNLumi_) || StartAverage_){
     beginLumiOfPVFit_=0;
     refPVtime[0] = 0;
     }
 
 
 
 
      //---------Readjustment of theBSvector, RefTime, beginLSofFit---------
      vector<BSTrkParameters> theBSvector1 = theBeamFitter->getBSvector();
      mapLSBSTrkSize[countLumi_]= (theBSvector1.size());
       size_t PreviousRecords=0;     //needed to fill nth record of tracks in GUI
 
       if(StartAverage_){
       size_t SizeToRemove=0;
       std::map<int, std::size_t>::iterator rmls=mapLSBSTrkSize.begin();
       SizeToRemove = rmls->second;
       if(debug_)edm::LogInfo("BeamMonitor")<< "  The size to remove is =  "<< SizeToRemove << endl;
       int changedAfterThis=0;
       for(std::map<int, std::size_t>::iterator rmLS = mapLSBSTrkSize.begin(); rmLS!=mapLSBSTrkSize.end(); ++rmLS, ++changedAfterThis){
          if(changedAfterThis > 0 ){(rmLS->second)  = (rmLS->second)-SizeToRemove;
                                     if((mapLSBSTrkSize.size()- (size_t)changedAfterThis) == 2 )PreviousRecords = (rmLS->second);
                                   } }
 
       theBeamFitter->resizeBSvector(SizeToRemove);
 
       map<int, std::size_t >::iterator tmpIt=mapLSBSTrkSize.begin();
       mapLSBSTrkSize.erase(tmpIt);
 
       std::pair<int,int> checkfitLS = theBeamFitter->getFitLSRange();
       std::pair<time_t,time_t> checkfitTime =theBeamFitter->getRefTime();
       theBeamFitter->setFitLSRange(beginLumiOfBSFit_, checkfitLS.second);
       theBeamFitter->setRefTime(refBStime[0], checkfitTime.second);
       }
 
       //Fill the track for this fit
       vector<BSTrkParameters> theBSvector = theBeamFitter->getBSvector();
       h_nTrk_lumi->ShiftFillLast( theBSvector.size() );
 
       if(debug_)edm::LogInfo("BeamMonitor")<< "FitAndFill::   Size of  theBSViector.size()  After =" << theBSvector.size() << endl;
 
 
 
   bool countFitting = false;
   if (theBSvector.size() >= PreviousRecords  && theBSvector.size() >= min_Ntrks_) {
       countFitting = true;
      }
 
 
    //---Fix for Cut Flow Table for Running average in a same way//the previous code  has problem for resetting!!!
    mapLSCF[countLumi_] = *theBeamFitter->getCutFlow();
    if(StartAverage_ && mapLSCF.size()){
      const TH1F& cutFlowToSubtract = mapLSCF.begin()->second;
      // Subtract the last cut flow from all of the others.
      std::map<int, TH1F>::iterator cf = mapLSCF.begin();
      // Start on second entry
      for(; cf != mapLSCF.end(); ++cf) {
        cf->second.Add(&cutFlowToSubtract, -1);
      }
      theBeamFitter->subtractFromCutFlow(&cutFlowToSubtract);
      // Remove the obsolete lumi section
      mapLSCF.erase(mapLSCF.begin());
    }
 
   if (resetHistos_) {
     h_d0_phi0->Reset();
     h_vx_vy->Reset();
     h_vx_dz->Reset();
     h_vy_dz->Reset();
     h_trk_z0->Reset();
     resetHistos_ = false;
   }
 
   if(StartAverage_) nthBSTrk_  = PreviousRecords; //after average proccess is ON//for 2-6 LS fit PreviousRecords is size from 2-5 LS
 
   edm::LogInfo("BeamMonitor")<<" The Previous Recored for this fit is  ="<<nthBSTrk_<<endl;
 
   unsigned int itrk = 0;
   for (vector<BSTrkParameters>::const_iterator BSTrk = theBSvector.begin();
        BSTrk != theBSvector.end();  ++BSTrk, ++itrk){
     if (itrk >= nthBSTrk_){//fill for this record only !!
       h_d0_phi0->Fill( BSTrk->phi0(), BSTrk->d0() );
       double vx = BSTrk->vx();
       double vy = BSTrk->vy();
       double z0 = BSTrk->z0();
       h_vx_vy->Fill( vx, vy );
       h_vx_dz->Fill( z0, vx );
       h_vy_dz->Fill( z0, vy );
       h_trk_z0->Fill( z0 );
      }
   }
 
 
    nthBSTrk_ = theBSvector.size(); // keep track of num of tracks filled so far
 
    edm::LogInfo("BeamMonitor")<<" The Current Recored for this fit is  ="<<nthBSTrk_<<endl;
 
   if (countFitting) edm::LogInfo("BeamMonitor") << "FitAndFill::  Num of tracks collected = " << nthBSTrk_ << endl;
 
 
   if (fitNLumi_ > 0) {
     if (onlineMode_){
       if (currentlumi%fitNLumi_!=0) {
 //  for (std::map<TString,MonitorElement*>::iterator itAll = hs.begin();
 //       itAll != hs.end(); ++itAll) {
 //    if ((*itAll).first.Contains("all")) {
 //      (*itAll).second->setBinContent(currentlumi,0.);
 //      (*itAll).second->setBinError(currentlumi,0.);
 //    }
 //  }
     return;
       }
     }
     else
       if (countLumi_%fitNLumi_!=0) return;
   }
 
   edm::LogInfo("BeamMonitor") << "FitAndFill:: [DebugTime] refBStime[0] = " << refBStime[0]
                   << "; address =  " << &refBStime[0] << std::endl;
   edm::LogInfo("BeamMonitor") << "FitAndFill:: [DebugTime] refBStime[1] = " << refBStime[1]
                   << "; address =  " << &refBStime[1] << std::endl;
 
   //Fill for all LS even if fit fails
   h_nVtx_lumi->ShiftFillLast( (theBeamFitter->getPVvectorSize()), 0., fitNLumi_ );
   h_nVtx_lumi_all->setBinContent(currentlumi,(theBeamFitter->getPVvectorSize()));
 
   if (countFitting) {
     nFits_++;
     std::pair<int,int> fitLS = theBeamFitter->getFitLSRange();
     edm::LogInfo("BeamMonitor") << "FitAndFill::  [BeamFitter] Do BeamSpot Fit for LS = " << fitLS.first << " to " << fitLS.second << std::endl;
     edm::LogInfo("BeamMonitor") << "FitAndFill::  [BeamMonitor] Do BeamSpot Fit for LS = " << beginLumiOfBSFit_ << " to " << endLumiOfBSFit_ << std::endl;
 
     //Now Run the PV and Track Fitter over the collected tracks and pvs
     if (theBeamFitter->runPVandTrkFitter()) {
       reco::BeamSpot bs = theBeamFitter->getBeamSpot();
       if (bs.type() > 0) // with good beamwidth fit
     preBS = bs; // cache good fit results
 
       edm::LogInfo("BeamMonitor") << "\n RESULTS OF DEFAULT FIT:" << endl;
       edm::LogInfo("BeamMonitor") << bs << endl;
       edm::LogInfo("BeamMonitor") << "[BeamFitter] fitting done \n" << endl;
 
       hs["x0_lumi"]->ShiftFillLast( bs.x0(), bs.x0Error(), fitNLumi_ );
       hs["y0_lumi"]->ShiftFillLast( bs.y0(), bs.y0Error(), fitNLumi_ );
       hs["z0_lumi"]->ShiftFillLast( bs.z0(), bs.z0Error(), fitNLumi_ );
       hs["sigmaX0_lumi"]->ShiftFillLast( bs.BeamWidthX(), bs.BeamWidthXError(), fitNLumi_ );
       hs["sigmaY0_lumi"]->ShiftFillLast( bs.BeamWidthY(), bs.BeamWidthYError(), fitNLumi_ );
       hs["sigmaZ0_lumi"]->ShiftFillLast( bs.sigmaZ(), bs.sigmaZ0Error(), fitNLumi_ );
       hs["x0_lumi_all"]->setBinContent(currentlumi,bs.x0());
       hs["x0_lumi_all"]->setBinError(currentlumi,bs.x0Error());
       hs["y0_lumi_all"]->setBinContent(currentlumi,bs.y0());
       hs["y0_lumi_all"]->setBinError(currentlumi,bs.y0Error());
       hs["z0_lumi_all"]->setBinContent(currentlumi,bs.z0());
       hs["z0_lumi_all"]->setBinError(currentlumi,bs.z0Error());
       hs["sigmaX0_lumi_all"]->setBinContent(currentlumi, bs.BeamWidthX());
       hs["sigmaX0_lumi_all"]->setBinError(currentlumi, bs.BeamWidthXError());
       hs["sigmaY0_lumi_all"]->setBinContent(currentlumi, bs.BeamWidthY());
       hs["sigmaY0_lumi_all"]->setBinError(currentlumi, bs.BeamWidthYError());
       hs["sigmaZ0_lumi_all"]->setBinContent(currentlumi, bs.sigmaZ());
       hs["sigmaZ0_lumi_all"]->setBinError(currentlumi, bs.sigmaZ0Error());
 
       int nthBin = tmpTime - refTime;
       if (nthBin > 0) {
     hs["x0_time"]->setBinContent(nthBin, bs.x0());
     hs["y0_time"]->setBinContent(nthBin, bs.y0());
     hs["z0_time"]->setBinContent(nthBin, bs.z0());
     hs["sigmaX0_time"]->setBinContent(nthBin, bs.BeamWidthX());
     hs["sigmaY0_time"]->setBinContent(nthBin, bs.BeamWidthY());
     hs["sigmaZ0_time"]->setBinContent(nthBin, bs.sigmaZ());
     hs["x0_time"]->setBinError(nthBin, bs.x0Error());
     hs["y0_time"]->setBinError(nthBin, bs.y0Error());
     hs["z0_time"]->setBinError(nthBin, bs.z0Error());
     hs["sigmaX0_time"]->setBinError(nthBin, bs.BeamWidthXError());
     hs["sigmaY0_time"]->setBinError(nthBin, bs.BeamWidthYError());
     hs["sigmaZ0_time"]->setBinError(nthBin, bs.sigmaZ0Error());
       }
 
       int jthBin = tmpTime - startTime;
       if (jthBin > 0) {
     hs["x0_time_all"]->setBinContent(jthBin, bs.x0());
     hs["y0_time_all"]->setBinContent(jthBin, bs.y0());
     hs["z0_time_all"]->setBinContent(jthBin, bs.z0());
     hs["sigmaX0_time_all"]->setBinContent(jthBin, bs.BeamWidthX());
     hs["sigmaY0_time_all"]->setBinContent(jthBin, bs.BeamWidthY());
     hs["sigmaZ0_time_all"]->setBinContent(jthBin, bs.sigmaZ());
     hs["x0_time_all"]->setBinError(jthBin, bs.x0Error());
     hs["y0_time_all"]->setBinError(jthBin, bs.y0Error());
     hs["z0_time_all"]->setBinError(jthBin, bs.z0Error());
     hs["sigmaX0_time_all"]->setBinError(jthBin, bs.BeamWidthXError());
     hs["sigmaY0_time_all"]->setBinError(jthBin, bs.BeamWidthYError());
     hs["sigmaZ0_time_all"]->setBinError(jthBin, bs.sigmaZ0Error());
       }
 
       h_x0->Fill( bs.x0());
       h_y0->Fill( bs.y0());
       h_z0->Fill( bs.z0());
       if (bs.type() > 0) { // with good beamwidth fit
     h_sigmaX0->Fill( bs.BeamWidthX());
     h_sigmaY0->Fill( bs.BeamWidthY());
       }
       h_sigmaZ0->Fill( bs.sigmaZ());
 
       if (nthBSTrk_ >= 2*min_Ntrks_) {
     double amp = std::sqrt(bs.x0()*bs.x0()+bs.y0()*bs.y0());
     double alpha = std::atan2(bs.y0(),bs.x0());
     std::unique_ptr<TF1> f1{ new TF1("f1","[0]*sin(x-[1])",-3.14,3.14) };
     f1->SetParameters(amp,alpha);
     f1->SetParLimits(0,amp-0.1,amp+0.1);
     f1->SetParLimits(1,alpha-0.577,alpha+0.577);
     f1->SetLineColor(4);
     h_d0_phi0->getTProfile()->Fit(f1.get(),"QR");
 
     double mean = bs.z0();
     double width = bs.sigmaZ();
     std::unique_ptr<TF1> fgaus{ new TF1("fgaus","gaus") };
     fgaus->SetParameters(mean,width);
     fgaus->SetLineColor(4);
     h_trk_z0->getTH1()->Fit(fgaus.get(),"QLRM","",mean-3*width,mean+3*width);
       }
 
       fitResults->Reset();
       std::pair<int,int> LSRange = theBeamFitter->getFitLSRange();
       char tmpTitle[50];
       sprintf(tmpTitle,"%s %i %s %i","Fitted Beam Spot (cm) of LS: ",LSRange.first," to ",LSRange.second);
       fitResults->setAxisTitle(tmpTitle,1);
       fitResults->setBinContent(1,8,bs.x0());
       fitResults->setBinContent(1,7,bs.y0());
       fitResults->setBinContent(1,6,bs.z0());
       fitResults->setBinContent(1,5,bs.sigmaZ());
       fitResults->setBinContent(1,4,bs.dxdz());
       fitResults->setBinContent(1,3,bs.dydz());
       if (bs.type() > 0) { // with good beamwidth fit
     fitResults->setBinContent(1,2,bs.BeamWidthX());
     fitResults->setBinContent(1,1,bs.BeamWidthY());
       }
       else { // fill cached widths
     fitResults->setBinContent(1,2,preBS.BeamWidthX());
     fitResults->setBinContent(1,1,preBS.BeamWidthY());
       }
 
       fitResults->setBinContent(2,8,bs.x0Error());
       fitResults->setBinContent(2,7,bs.y0Error());
       fitResults->setBinContent(2,6,bs.z0Error());
       fitResults->setBinContent(2,5,bs.sigmaZ0Error());
       fitResults->setBinContent(2,4,bs.dxdzError());
       fitResults->setBinContent(2,3,bs.dydzError());
       if (bs.type() > 0) { // with good beamwidth fit
     fitResults->setBinContent(2,2,bs.BeamWidthXError());
     fitResults->setBinContent(2,1,bs.BeamWidthYError());
       }
       else { // fill cached width errors
     fitResults->setBinContent(2,2,preBS.BeamWidthXError());
     fitResults->setBinContent(2,1,preBS.BeamWidthYError());
       }
 
       // count good fit
       //     if (std::fabs(refBS.x0()-bs.x0())/bs.x0Error() < deltaSigCut_) { // disabled temporarily
       summaryContent_[0] += 1.;
       //     }
       //     if (std::fabs(refBS.y0()-bs.y0())/bs.y0Error() < deltaSigCut_) { // disabled temporarily
       summaryContent_[1] += 1.;
       //     }
       //     if (std::fabs(refBS.z0()-bs.z0())/bs.z0Error() < deltaSigCut_) { // disabled temporarily
       summaryContent_[2] += 1.;
       //     }
 
     } //if (theBeamFitter->runPVandTrkFitter())
     else { // beam fit fails
       reco::BeamSpot bs = theBeamFitter->getBeamSpot();
       edm::LogInfo("BeamMonitor") << "FitAndFill::   [BeamMonitor] Beam fit fails!!! \n" << endl;
       edm::LogInfo("BeamMonitor") << "FitAndFill::   [BeamMonitor] Output beam spot for DIP \n" << endl;
       edm::LogInfo("BeamMonitor") << bs << endl;
 
       hs["sigmaX0_lumi"]->ShiftFillLast( bs.BeamWidthX(), bs.BeamWidthXError(), fitNLumi_ );
       hs["sigmaY0_lumi"]->ShiftFillLast( bs.BeamWidthY(), bs.BeamWidthYError(), fitNLumi_ );
       hs["sigmaZ0_lumi"]->ShiftFillLast( bs.sigmaZ(), bs.sigmaZ0Error(), fitNLumi_ );
       hs["x0_lumi"]->ShiftFillLast( bs.x0(), bs.x0Error(), fitNLumi_ );
       hs["y0_lumi"]->ShiftFillLast( bs.y0(), bs.y0Error(), fitNLumi_ );
       hs["z0_lumi"]->ShiftFillLast( bs.z0(), bs.z0Error(), fitNLumi_ );
     } // end of beam fit fails
 
 
   } //-------- end of countFitting------------------------------------------
  else { // no fit
     // Overwrite Fit LS and fit time when no event processed or no track selected
     theBeamFitter->setFitLSRange(beginLumiOfBSFit_,endLumiOfBSFit_);
     theBeamFitter->setRefTime(refBStime[0],refBStime[1]);
     if (theBeamFitter->runPVandTrkFitter()) {} // Dump fake beam spot for DIP
     reco::BeamSpot bs = theBeamFitter->getBeamSpot();
     edm::LogInfo("BeamMonitor") << "FitAndFill::  [BeamMonitor] No fitting \n" << endl;
     edm::LogInfo("BeamMonitor") << "FitAndFill::  [BeamMonitor] Output fake beam spot for DIP \n" << endl;
     edm::LogInfo("BeamMonitor") << bs << endl;
 
     hs["sigmaX0_lumi"]->ShiftFillLast( bs.BeamWidthX(), bs.BeamWidthXError(), fitNLumi_ );
     hs["sigmaY0_lumi"]->ShiftFillLast( bs.BeamWidthY(), bs.BeamWidthYError(), fitNLumi_ );
     hs["sigmaZ0_lumi"]->ShiftFillLast( bs.sigmaZ(), bs.sigmaZ0Error(), fitNLumi_ );
     hs["x0_lumi"]->ShiftFillLast( bs.x0(), bs.x0Error(), fitNLumi_ );
     hs["y0_lumi"]->ShiftFillLast( bs.y0(), bs.y0Error(), fitNLumi_ );
     hs["z0_lumi"]->ShiftFillLast( bs.z0(), bs.z0Error(), fitNLumi_ );
   }
 
 
 
   // Fill summary report
   if (countFitting) {
     for (int n = 0; n < nFitElements_; n++) {
       reportSummaryContents[n]->Fill( summaryContent_[n] / (float)nFits_ );
     }
 
     summarySum_ = 0;
     for (int ii = 0; ii < nFitElements_; ii++) {
       summarySum_ += summaryContent_[ii];
     }
     reportSummary_ = summarySum_ / (nFitElements_ * nFits_);
     if (reportSummary) reportSummary->Fill(reportSummary_);
 
     for ( int bi = 0; bi < nFitElements_ ; bi++) {
       reportSummaryMap->setBinContent(1,bi+1,summaryContent_[bi] / (float)nFits_);
     }
   }
 
 
 
 
   if ( ( resetFitNLumi_ > 0 &&
         ((onlineMode_ && countLumi_==resetFitNLumi_ ) ||  //OR it should be currentLumi_ (if in sequence then does not mattar)
         (!onlineMode_ && countLumi_==resetFitNLumi_ ))
        )  || (StartAverage_) ){
 
     edm::LogInfo("BeamMonitor") << "FitAndFill:: The flag is ON for running average Beam Spot fit"<<endl;
     StartAverage_    = true;
     firstAverageFit_++;
     resetHistos_     = true;
     nthBSTrk_        = 0;
     beginLumiOfBSFit_= 0;
     refBStime[0]     = 0;
 
     }
 
 
 
 }

void BeamMonitor::formatFitTime	(	char *	,
		const std::time_t &
	)

private

Definition at line 44 of file BeamMonitor.cc.

References b, CEST, plotBeamSpotDB::ptm, and create_public_lumi_plots::year.

Referenced by beginRun(), and scrollTH1().

                                                             {
 #define CET (+1)
 #define CEST (+2)
 
   tm * ptm;
   ptm = gmtime ( &t );
   int year = ptm->tm_year;
  //check if year is ok
  if (year <= 37) year += 2000;                                                        
  if (year >= 70 && year <= 137) year += 1900;                                         
              
   if (year < 1995){                                                                   
         edm::LogError("BadTimeStamp") << "year reported is " << year <<" !!"<<std::endl;
         year = 2015; //overwritten later by BeamFitter.cc for fits but needed here for TH1
         edm::LogError("BadTimeStamp") << "Resetting to " <<year<<std::endl;
       } 
   sprintf( ts, "%4d-%02d-%02d %02d:%02d:%02d", year,ptm->tm_mon+1,ptm->tm_mday,(ptm->tm_hour+CEST)%24, ptm->tm_min, ptm->tm_sec);
 
 #ifdef STRIP_TRAILING_BLANKS_IN_TIMEZONE
   unsigned int b = strlen(ts);
   while (ts[--b] == ' ') {ts[b] = 0;}
 #endif
 }

void BeamMonitor::RestartFitting ( )

private

Definition at line 1320 of file BeamMonitor.cc.

References beginLumiOfBSFit_, beginLumiOfPVFit_, countGapLumi_, countLumi_, debug_, h_PVx, h_PVy, h_PVz, mapBeginBSLS, mapBeginBSTime, mapBeginPVLS, mapBeginPVTime, mapLSBSTrkSize, mapLSCF, mapLSPVStoreSize, mapNPV, mapPVx, mapPVy, mapPVz, nthBSTrk_, refBStime, refPVtime, MonitorElement::Reset(), BeamFitter::resetCutFlow(), resetHistos_, BeamFitter::resetLSRange(), BeamFitter::resetPVFitter(), BeamFitter::resetRefTime(), BeamFitter::resetTrkVector(), StartAverage_, and theBeamFitter.

                                 {
  if(debug_)edm::LogInfo("BeamMonitor") << " RestartingFitting:: Restart Beami everything to a fresh start !!! because Gap is > 10 LS" <<endl;
                                                 //track based fit reset here
                                                 resetHistos_ = true;
                                                 nthBSTrk_ = 0;
                                                 theBeamFitter->resetTrkVector();
                                                 theBeamFitter->resetLSRange();
                                                 theBeamFitter->resetRefTime();
                                                 theBeamFitter->resetPVFitter();
                                                 theBeamFitter->resetCutFlow();
                                                 beginLumiOfBSFit_ = 0;
                                                 refBStime[0] = 0;
                                                 //pv based fit iis reset here
                                                 h_PVx[0]->Reset();
                                                 h_PVy[0]->Reset();
                                                 h_PVz[0]->Reset();
                                                 beginLumiOfPVFit_ = 0;
                                                 refPVtime[0] = 0;
                                                 //Clear all the Maps here
                                                 mapPVx.clear();
                                                 mapPVy.clear();
                                                 mapPVz.clear();
                                                 mapNPV.clear();
                                                 mapBeginBSLS.clear();
                                                 mapBeginPVLS.clear();
                                                 mapBeginBSTime.clear();
                                                 mapBeginPVTime.clear();
                                                 mapLSBSTrkSize.clear();
                                                 mapLSPVStoreSize.clear();
                                                 mapLSCF.clear(); countGapLumi_=0; countLumi_=0; StartAverage_=false;
 
 }

void BeamMonitor::scrollTH1	(	TH1 *	,
		std::time_t
	)

private

Definition at line 1380 of file BeamMonitor.cc.

References newFWLiteAna::bin, buffTime, pyrootRender::da, formatFitTime(), and lastNZbin.

Referenced by FitAndFill().

                                                {
   char offsetTime[64];
   formatFitTime(offsetTime, ref);
   TDatime da(offsetTime);
   if (lastNZbin > 0) {
     double val = h->GetBinContent(lastNZbin);
     double valErr = h->GetBinError(lastNZbin);
     h->Reset();
     h->GetXaxis()->SetTimeOffset(da.Convert(kTRUE));
     int bin = (lastNZbin > buffTime ? buffTime : 1);
     h->SetBinContent(bin,val);
     h->SetBinError(bin,valErr);
   }
   else {
     h->Reset();
     h->GetXaxis()->SetTimeOffset(da.Convert(kTRUE));
   }
 }

bool BeamMonitor::testScroll	(	std::time_t &	,
		std::time_t &
	)

private

Definition at line 1401 of file BeamMonitor.cc.

References newFWLiteAna::bin, buffTime, hs, intervalInSec_, lastNZbin, and hltrates_dqm_sourceclient-live_cfg::offset.

Referenced by FitAndFill().

                                                                 {
   bool scroll_ = false;
   if (tmpTime_ - refTime_ >= intervalInSec_) {
     scroll_ = true;
     edm::LogInfo("BeamMonitor") << "testScroll::  Reset Time Offset" << std::endl;
     lastNZbin = intervalInSec_;
     for (int bin = intervalInSec_; bin >= 1; bin--) {
       if (hs["x0_time"]->getBinContent(bin) > 0) {
     lastNZbin = bin;
     break;
       }
     }
     edm::LogInfo("BeamMonitor") << "testScroll::  Last non zero bin = " << lastNZbin << std::endl;
     if (tmpTime_ - refTime_ >= intervalInSec_ + lastNZbin) {
       edm::LogInfo("BeamMonitor") << "testScroll::  Time difference too large since last readout" << std::endl;
       lastNZbin = 0;
       refTime_ = tmpTime_ - buffTime;
     }
     else{
       edm::LogInfo("BeamMonitor") << "testScroll::  Offset to last record" << std::endl;
       int offset = ((lastNZbin > buffTime) ? (lastNZbin - buffTime) : (lastNZbin - 1));
       refTime_ += offset;
     }
   }
   return scroll_;
 }

Member Data Documentation

int BeamMonitor::beginLumiOfBSFit_

private

Definition at line 87 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginLuminosityBlock(), FitAndFill(), and RestartFitting().

int BeamMonitor::beginLumiOfPVFit_

private

Definition at line 89 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginLuminosityBlock(), FitAndFill(), and RestartFitting().

edm::EDGetTokenT<reco::BeamSpot> BeamMonitor::bsSrc_

private

Definition at line 68 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

int BeamMonitor::countEvt_

private

Definition at line 85 of file BeamMonitor.h.

Referenced by analyze().

int BeamMonitor::countGapLumi_

private

Definition at line 108 of file BeamMonitor.h.

Referenced by RestartFitting().

int BeamMonitor::countLumi_

private

Definition at line 86 of file BeamMonitor.h.

Referenced by analyze(), beginLuminosityBlock(), FitAndFill(), and RestartFitting().

MonitorElement* BeamMonitor::cutFlowTable

private

Definition at line 165 of file BeamMonitor.h.

Referenced by analyze(), and beginJob().

DQMStore* BeamMonitor::dbe_

private

Definition at line 82 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), beginJob(), and FitAndFill().

bool BeamMonitor::debug_

private

Definition at line 78 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginLuminosityBlock(), beginRun(), endRun(), FitAndFill(), and RestartFitting().

double BeamMonitor::deltaSigCut_

private

Definition at line 98 of file BeamMonitor.h.

Referenced by BeamMonitor().

int BeamMonitor::endLumiOfBSFit_

private

Definition at line 88 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

int BeamMonitor::endLumiOfPVFit_

private

Definition at line 90 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

int BeamMonitor::firstAverageFit_

private

Definition at line 107 of file BeamMonitor.h.

Referenced by FitAndFill().

int BeamMonitor::fitNLumi_

private

Definition at line 73 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

int BeamMonitor::fitPVNLumi_

private

Definition at line 74 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

MonitorElement* BeamMonitor::fitResults

private

Definition at line 129 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

int BeamMonitor::frun

private

Definition at line 174 of file BeamMonitor.h.

Referenced by beginRun(), and FitAndFill().

edm::TimeValue_t BeamMonitor::ftimestamp

private

Definition at line 172 of file BeamMonitor.h.

Referenced by beginRun().

MonitorElement* BeamMonitor::h_d0_phi0

private

Definition at line 122 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_nTrk_lumi

private

Definition at line 119 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_nVtx

private

Definition at line 136 of file BeamMonitor.h.

Referenced by analyze(), and beginJob().

MonitorElement* BeamMonitor::h_nVtx_lumi

private

Definition at line 120 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_nVtx_lumi_all

private

Definition at line 121 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_nVtx_st

private

Definition at line 137 of file BeamMonitor.h.

Referenced by analyze(), beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_PVx[2]

private

Definition at line 138 of file BeamMonitor.h.

Referenced by analyze(), beginJob(), FitAndFill(), and RestartFitting().

MonitorElement* BeamMonitor::h_PVxz

private

Definition at line 141 of file BeamMonitor.h.

Referenced by analyze(), and beginJob().

MonitorElement* BeamMonitor::h_PVy[2]

private

Definition at line 139 of file BeamMonitor.h.

Referenced by analyze(), beginJob(), FitAndFill(), and RestartFitting().

MonitorElement* BeamMonitor::h_PVyz

private

Definition at line 142 of file BeamMonitor.h.

Referenced by analyze(), and beginJob().

MonitorElement* BeamMonitor::h_PVz[2]

private

Definition at line 140 of file BeamMonitor.h.

Referenced by analyze(), beginJob(), FitAndFill(), and RestartFitting().

MonitorElement* BeamMonitor::h_sigmaX0

private

Definition at line 133 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_sigmaY0

private

Definition at line 134 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_sigmaZ0

private

Definition at line 135 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_trk_z0

private

Definition at line 123 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_trkPt

private

Definition at line 127 of file BeamMonitor.h.

Referenced by analyze(), and beginJob().

MonitorElement* BeamMonitor::h_trkVz

private

Definition at line 128 of file BeamMonitor.h.

Referenced by analyze(), and beginJob().

MonitorElement* BeamMonitor::h_vx_dz

private

Definition at line 125 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_vx_vy

private

Definition at line 124 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_vy_dz

private

Definition at line 126 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_x0

private

Definition at line 130 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_y0

private

Definition at line 131 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::h_z0

private

Definition at line 132 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

edm::EDGetTokenT<edm::TriggerResults> BeamMonitor::hltSrc_

private

Definition at line 71 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

std::map<TString, MonitorElement*> BeamMonitor::hs

private

Definition at line 144 of file BeamMonitor.h.

Referenced by beginJob(), beginRun(), FitAndFill(), and testScroll().

int BeamMonitor::intervalInSec_

private

Definition at line 77 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginJob(), and testScroll().

std::vector<std::string> BeamMonitor::jetTrigger_

private

Definition at line 80 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

int BeamMonitor::lastlumi_

private

Definition at line 91 of file BeamMonitor.h.

Referenced by BeamMonitor(), and beginLuminosityBlock().

int BeamMonitor::lastNZbin

private

Definition at line 175 of file BeamMonitor.h.

Referenced by scrollTH1(), and testScroll().

std::map<int, int> BeamMonitor::mapBeginBSLS

private

Definition at line 150 of file BeamMonitor.h.

Referenced by beginLuminosityBlock(), endRun(), and RestartFitting().

std::map<int, std::time_t> BeamMonitor::mapBeginBSTime

private

Definition at line 151 of file BeamMonitor.h.

Referenced by beginLuminosityBlock(), endRun(), and RestartFitting().

std::map<int, int> BeamMonitor::mapBeginPVLS

private

Definition at line 150 of file BeamMonitor.h.

Referenced by beginLuminosityBlock(), endRun(), and RestartFitting().

std::map<int, std::time_t> BeamMonitor::mapBeginPVTime

private

Definition at line 151 of file BeamMonitor.h.

Referenced by beginLuminosityBlock(), endRun(), and RestartFitting().

std::map<int, std::size_t> BeamMonitor::mapLSBSTrkSize

private

Definition at line 153 of file BeamMonitor.h.

Referenced by endRun(), FitAndFill(), and RestartFitting().

std::map<int, TH1F> BeamMonitor::mapLSCF

private

Definition at line 156 of file BeamMonitor.h.

Referenced by endRun(), FitAndFill(), and RestartFitting().

std::map<int, size_t> BeamMonitor::mapLSPVStoreSize

private

Definition at line 154 of file BeamMonitor.h.

Referenced by endRun(), FitAndFill(), and RestartFitting().

std::map<int, std::vector<int> > BeamMonitor::mapNPV

private

Definition at line 148 of file BeamMonitor.h.

Referenced by analyze(), endRun(), FitAndFill(), and RestartFitting().

std::map<int, std::vector<float> > BeamMonitor::mapPVx

private

Definition at line 147 of file BeamMonitor.h.

Referenced by analyze(), endRun(), FitAndFill(), and RestartFitting().

std::map<int, std::vector<float> > BeamMonitor::mapPVy

private

Definition at line 147 of file BeamMonitor.h.

Referenced by analyze(), endRun(), FitAndFill(), and RestartFitting().

std::map<int, std::vector<float> > BeamMonitor::mapPVz

private

Definition at line 147 of file BeamMonitor.h.

Referenced by analyze(), endRun(), FitAndFill(), and RestartFitting().

double BeamMonitor::maxZ_

private

Definition at line 100 of file BeamMonitor.h.

Referenced by BeamMonitor().

unsigned int BeamMonitor::min_Ntrks_

private

Definition at line 99 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

unsigned int BeamMonitor::minNrVertices_

private

Definition at line 101 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

double BeamMonitor::minVtxNdf_

private

Definition at line 102 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

double BeamMonitor::minVtxWgt_

private

Definition at line 103 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

std::string BeamMonitor::monitorName_

private

Definition at line 67 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), beginJob(), and FitAndFill().

int BeamMonitor::nextlumi_

private

Definition at line 92 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), beginLuminosityBlock(), and endLuminosityBlock().

int BeamMonitor::nFitElements_

private

Definition at line 96 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

int BeamMonitor::nFits_

private

Definition at line 97 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

unsigned int BeamMonitor::nthBSTrk_

private

Definition at line 95 of file BeamMonitor.h.

Referenced by FitAndFill(), and RestartFitting().

bool BeamMonitor::onlineMode_

private

Definition at line 79 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), beginLuminosityBlock(), endJob(), endLuminosityBlock(), and FitAndFill().

edm::ParameterSet BeamMonitor::parameters_

private

Definition at line 66 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginJob(), Mixins._TypedParameterizable::clone(), Types.PSet::clone(), and Mixins._TypedParameterizable::copy().

reco::BeamSpot BeamMonitor::preBS

private

Definition at line 116 of file BeamMonitor.h.

Referenced by FitAndFill().

bool BeamMonitor::processed_

private

Definition at line 110 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), beginLuminosityBlock(), and FitAndFill().

MonitorElement* BeamMonitor::pvResults

private

Definition at line 143 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

edm::EDGetTokenT<reco::VertexCollection> BeamMonitor::pvSrc_

private

Definition at line 70 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

reco::BeamSpot BeamMonitor::refBS

private

Definition at line 115 of file BeamMonitor.h.

Referenced by analyze().

std::time_t BeamMonitor::refBStime[2]

private

Definition at line 93 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginLuminosityBlock(), endLuminosityBlock(), FitAndFill(), and RestartFitting().

std::time_t BeamMonitor::refPVtime[2]

private

Definition at line 94 of file BeamMonitor.h.

Referenced by BeamMonitor(), beginLuminosityBlock(), endLuminosityBlock(), FitAndFill(), and RestartFitting().

std::time_t BeamMonitor::refTime

private

Definition at line 171 of file BeamMonitor.h.

Referenced by beginRun(), and FitAndFill().

MonitorElement* BeamMonitor::reportSummary

private

Definition at line 162 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

Float_t BeamMonitor::reportSummary_

private

Definition at line 159 of file BeamMonitor.h.

Referenced by FitAndFill().

MonitorElement* BeamMonitor::reportSummaryContents[3]

private

Definition at line 163 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

MonitorElement* BeamMonitor::reportSummaryMap

private

Definition at line 164 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

int BeamMonitor::resetFitNLumi_

private

Definition at line 75 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), and FitAndFill().

bool BeamMonitor::resetHistos_

private

Definition at line 105 of file BeamMonitor.h.

Referenced by FitAndFill(), and RestartFitting().

int BeamMonitor::resetPVNLumi_

private

Definition at line 76 of file BeamMonitor.h.

Referenced by BeamMonitor(), and FitAndFill().

bool BeamMonitor::StartAverage_

private

Definition at line 106 of file BeamMonitor.h.

Referenced by analyze(), beginLuminosityBlock(), FitAndFill(), and RestartFitting().

std::time_t BeamMonitor::startTime

private

Definition at line 170 of file BeamMonitor.h.

Referenced by beginRun(), and FitAndFill().

Float_t BeamMonitor::summaryContent_[3]

private

Definition at line 161 of file BeamMonitor.h.

Referenced by beginJob(), and FitAndFill().

Float_t BeamMonitor::summarySum_

private

Definition at line 160 of file BeamMonitor.h.

Referenced by FitAndFill().

BeamFitter* BeamMonitor::theBeamFitter

private

Definition at line 83 of file BeamMonitor.h.

Referenced by analyze(), BeamMonitor(), FitAndFill(), RestartFitting(), and ~BeamMonitor().

std::time_t BeamMonitor::tmpTime

private

Definition at line 169 of file BeamMonitor.h.

Referenced by beginRun(), endLuminosityBlock(), and FitAndFill().

edm::EDGetTokenT<reco::TrackCollection> BeamMonitor::tracksLabel_

private

Definition at line 69 of file BeamMonitor.h.

Referenced by analyze(), and BeamMonitor().

Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation