DDCoreToDDXMLOutput Class Reference

#include <DDCoreToDDXMLOutput.h>

Public Member Functions
void	logicalPart (const DDLogicalPart &lp, std::ostream &xos)
void	material (const DDMaterial &material, std::ostream &xos)
void	position (const DDLogicalPart &parent, const DDLogicalPart &child, DDPosData *edgeToChild, int &rotNameSeed, std::ostream &xos)
void	rotation (DDRotation &rotation, std::ostream &xos, const std::string &rotn="")
void	solid (const DDSolid &solid, std::ostream &xos)
void	specpar (const DDSpecifics &sp, std::ostream &xos)
void	specpar (const std::pair< DDsvalues_type, std::set< const DDPartSelection * > > &pssv, std::ostream &xos)

Public Attributes
std::string	ns_
double	tol_

Detailed Description

Author

: Michael Case Initial Version

Version

: 0.0

Date

: 17.10.08

Description: The idea is to store one large XML file containing the XML elements in DDL (Detector Description Language). In doing so, all DDAlgorithms or other code generated DD in-memory components should be reproduced without the need for them to run again if the geometry is read into DDLParser again.

Definition at line 25 of file DDCoreToDDXMLOutput.h.

Member Function Documentation

void DDCoreToDDXMLOutput::logicalPart	(	const DDLogicalPart &	lp,
		std::ostream &	xos
	)

Definition at line 357 of file DDCoreToDDXMLOutput.cc.

References DDLogicalPart::material(), DDLogicalPart::solid(), and DDBase< N, C >::toString().

Referenced by OutputDDToDDL::beginRun(), and OutputMagneticFieldDDToDDL::beginRun().

{   
   xos << "<LogicalPart name=\""  << lp.toString() << "\">" << std::endl;
   xos << "<rSolid name=\""  << lp.solid().toString() << "\"/>" << std::endl;
   xos << "<rMaterial name=\""  << lp.material().toString() << "\"/>" << std::endl;
   xos << "</LogicalPart>" << std::endl;
}

void DDCoreToDDXMLOutput::material	(	const DDMaterial &	material,
		std::ostream &	xos
	)

Definition at line 280 of file DDCoreToDDXMLOutput.cc.

References DDMaterial::a(), DDMaterial::constituent(), DDMaterial::density(), g, j, DDMaterial::noOfConstituents(), DDBase< N, C >::toString(), and DDMaterial::z().

Referenced by OutputDDToDDL::beginRun(), and OutputMagneticFieldDDToDDL::beginRun().

{
   int noc = material.noOfConstituents();
   if( noc == 0 ) 
   {
      xos << "<ElementaryMaterial name=\""  << material.toString() << "\""
      << " density=\"" 
      << std::scientific << std::setprecision(5)
      << material.density() / mg * cm3 << "*mg/cm3\""
      << " atomicWeight=\"" 
      << std::fixed  
      << material.a() / g * mole << "*g/mole\""
      << std::setprecision(0) << std::fixed << " atomicNumber=\"" << material.z() << "\"/>"
      << std::endl;
   } 
   else 
   {
      xos << "<CompositeMaterial name=\""  << material.toString() << "\""
      << " density=\"" 
      << std::scientific << std::setprecision(5)
      << material.density() / mg * cm3 << "*mg/cm3\""
      << " method=\"mixture by weight\">" << std::endl;
      
      int j=0;
      for (; j<noc; ++j) 
      {
         xos << "<MaterialFraction fraction=\"" 
         << std::fixed << std::setprecision(9)
         << material.constituent(j).second << "\">" << std::endl;
         xos << "<rMaterial name=\""  << material.constituent(j).first.name() << "\"/>" << std::endl;
         xos << "</MaterialFraction>" << std::endl;
      }
      xos << "</CompositeMaterial>" << std::endl;
   }
}

void DDCoreToDDXMLOutput::position	(	const DDLogicalPart &	parent,
		const DDLogicalPart &	child,
		DDPosData *	edgeToChild,
		int &	rotNameSeed,
		std::ostream &	xos
	)

Definition at line 365 of file DDCoreToDDXMLOutput.cc.

References DDPosData::copyno_, DDRotation::matrix(), DDPosData::rot_, rotation(), AlCaHLTBitMon_QueryRunRegistry::string, DDBase< N, C >::toString(), and DDPosData::translation().

Referenced by OutputDDToDDL::beginRun(), and OutputMagneticFieldDDToDDL::beginRun().

{
   std::string rotName = edgeToChild->rot_.toString();
   DDRotationMatrix myIDENT;
   
   xos << "<PosPart copyNumber=\"" << edgeToChild->copyno_ << "\">" << std::endl;
   xos << "<rParent name=\"" << parent.toString() << "\"/>" << std::endl;
   xos << "<rChild name=\"" << child.toString() << "\"/>" << std::endl;
   if( *(edgeToChild->rot_.matrix()) != myIDENT ) 
   {
      if( rotName == ":" ) 
      {
         rotation(edgeToChild->rot_, xos);
      }
      else
      {
         xos << "<rRotation name=\"" << rotName << "\"/>" << std::endl;
      }
   } // else let default Rotation matrix be created?
   xos << "<Translation x=\"" << edgeToChild->translation().x() <<"*mm\""
   << " y=\"" << edgeToChild->translation().y() <<"*mm\""
   << " z=\"" << edgeToChild->translation().z() <<"*mm\"/>" << std::endl;
   xos << "</PosPart>" << std::endl;
}

void DDCoreToDDXMLOutput::rotation	(	DDRotation &	rotation,
		std::ostream &	xos,
		const std::string &	rotn = ""
	)

Definition at line 316 of file DDCoreToDDXMLOutput.cc.

References trackerTree::check(), gather_cfg::cout, DDRotation::matrix(), makeMuonMisalignmentScenario::rot, AlCaHLTBitMon_QueryRunRegistry::string, DDBase< N, C >::toString(), x, y, and z.

Referenced by OutputDDToDDL::beginRun(), OutputMagneticFieldDDToDDL::beginRun(), and position().

{
   double tol = 1.0e-3; // Geant4 compatible
   DD3Vector x,y,z; 
   rotation.matrix()->GetComponents(x,y,z); 
   double check = (x.Cross(y)).Dot(z); // in case of a LEFT-handed orthogonal system 
                                       // this must be -1
   bool reflection((1.-check)>tol);
   std::string rotName=rotation.toString();
   if( rotName == ":" ) 
   {
      if( rotn != "" ) 
      {
         rotName = rotn;
         std::cout << "about to try to make a new DDRotation... should fail!" << std::endl;
         DDRotation rot( DDName(rotn), rotation.matrix() );
         std:: cout << "new rotation: " << rot << std::endl;
      } 
      else 
      {
         std::cout << "WARNING: MAKING AN UNNAMED ROTATION" << std::endl;
      }
   }
   if( !reflection ) 
   {
      xos << "<Rotation ";
   } 
   else 
   {
      xos << "<ReflectionRotation ";
   }
   xos << "name=\"" << rotName << "\""
   << " phiX=\"" << x.phi()/deg << "*deg\""
   << " thetaX=\"" << x.theta()/deg << "*deg\""
   << " phiY=\"" << y.phi()/deg << "*deg\""
   << " thetaY=\"" << y.theta()/deg << "*deg\""
   << " phiZ=\"" << z.phi()/deg << "*deg\""
   << " thetaZ=\"" << z.theta()/deg << "*deg\"/>"
   << std::endl;
}

void DDCoreToDDXMLOutput::solid	(	const DDSolid &	solid,
		std::ostream &	xos
	)

Definition at line 15 of file DDCoreToDDXMLOutput.cc.

References DDTrap::alpha1(), DDTrap::alpha2(), DDPseudoTrap::atMinusZ(), DDTruncTubs::cutAtDelta(), DDTruncTubs::cutAtStart(), DDTruncTubs::cutInside(), dd_not_init, ddbox, ddcons, ddintersection, ddpolycone_rrz, ddpolycone_rz, ddpolyhedra_rrz, ddpolyhedra_rz, ddpseudotrap, ddreflected, ddshapeless, ddsubtraction, ddtorus, ddtrap, ddtrunctubs, ddtubs, ddunion, DDTruncTubs::deltaPhi(), DDPolycone::deltaPhi(), DDPolyhedra::deltaPhi(), DDTubs::deltaPhi(), DDCons::deltaPhi(), DDTorus::deltaPhi(), Exception, DDBox::halfX(), DDBox::halfY(), DDTrap::halfZ(), DDPseudoTrap::halfZ(), DDBox::halfZ(), i, DDTrap::phi(), DDCons::phiFrom(), DDPseudoTrap::radius(), DDTruncTubs::rIn(), DDTubs::rIn(), DDCons::rInMinusZ(), DDCons::rInPlusZ(), DDTorus::rMax(), DDPolycone::rMaxVec(), DDPolyhedra::rMaxVec(), DDTorus::rMin(), DDPolycone::rMinVec(), DDPolyhedra::rMinVec(), DDBooleanSolid::rotation(), DDTruncTubs::rOut(), DDTubs::rOut(), DDCons::rOutMinusZ(), DDCons::rOutPlusZ(), DDTorus::rTorus(), DDPolycone::rVec(), DDPolyhedra::rVec(), DDSolid::shape(), DDPolyhedra::sides(), DDBooleanSolid::solidA(), DDBooleanSolid::solidB(), DDTruncTubs::startPhi(), DDPolycone::startPhi(), DDPolyhedra::startPhi(), DDTubs::startPhi(), DDTorus::startPhi(), AlCaHLTBitMon_QueryRunRegistry::string, DDTrap::theta(), DDBase< N, C >::toString(), DDBooleanSolid::translation(), DDReflectionSolid::unreflected(), DDTrap::x1(), DDPseudoTrap::x1(), DDTrap::x2(), DDPseudoTrap::x2(), DDTrap::x3(), DDTrap::x4(), DDTrap::y1(), DDPseudoTrap::y1(), DDTrap::y2(), DDPseudoTrap::y2(), DDTruncTubs::zHalf(), DDTubs::zhalf(), DDCons::zhalf(), DDPolycone::zVec(), and DDPolyhedra::zVec().

Referenced by OutputDDToDDL::beginRun(), and OutputMagneticFieldDDToDDL::beginRun().

{
   switch( solid.shape()) 
   {
      case ddunion:
      case ddsubtraction:
      case ddintersection: 
      {      
         DDBooleanSolid rs( solid );
         if( solid.shape() == ddunion ) 
         {
            xos << "<UnionSolid ";
         } 
         else if( solid.shape() == ddsubtraction ) 
         {
            xos << "<SubtractionSolid ";
         } 
         else if( solid.shape() == ddintersection ) 
         {
            xos << "<IntersectionSolid ";
         }
         xos << "name=\""  << rs.toString() << "\">"  << std::endl;
         // if translation is == identity there are no parameters.
         // if there is no rotation the name will be ":"
         xos << "<rSolid name=\""  << rs.solidA().toString() << "\"/>" << std::endl;
         xos << "<rSolid name=\""  << rs.solidB().toString() << "\"/>" << std::endl;
         xos << "<Translation x=\"" << rs.translation().X() << "*mm\"";
         xos << " y=\"" << rs.translation().Y() << "*mm\"";
         xos << " z=\"" << rs.translation().Z() << "*mm\"";
         xos << "/>" << std::endl; 
         std::string rotName = rs.rotation().toString();
         if( rotName == ":" ) 
         {
            rotName = "gen:ID";
         }
         xos << "<rRotation name=\""  << rs.rotation().toString() << "\"/>" << std::endl;
         if( solid.shape() == ddunion ) 
         {
            xos << "</UnionSolid>" << std::endl;
         } 
         else if( solid.shape() == ddsubtraction ) 
         {
            xos << "</SubtractionSolid>" << std::endl;
         } 
         else if( solid.shape() == ddintersection ) 
         {
            xos << "</IntersectionSolid>" << std::endl;
         }
         break;
      }
      case ddreflected:
      { 
         /*
          <ReflectionSolid name="trd2mirror">
          <rSolid name="trd2"/>
          </ReflectionSolid>
          */
         DDReflectionSolid rs(solid);
         xos << "<ReflectionSolid name=\""  << rs.toString() << "\">"  << std::endl;
         xos << "<rSolid name=\""  << rs.unreflected().toString() << "\">" << std::endl;
         xos << "</ReflectionSolid>" << std::endl;
         break;
      }
      case ddbox: 
      {
         //    <Box name="box1" dx="10*cm" dy="10*cm" dz="10*cm"/>
         DDBox rs(solid);
         xos << "<Box name=\""  << rs.toString()  << "\"" //<< rs.toString() << "\"" //
         << " dx=\"" << rs.halfX() << "*mm\""
         << " dy=\"" << rs.halfY() << "*mm\""
         << " dz=\"" << rs.halfZ() << "*mm\"/>"
         << std::endl;
         break;
      }
      case ddtubs: 
      {
         //      <Tubs name="TrackerSupportTubeNomex"         rMin="[SupportTubeR1]+[Tol]" 
         //            rMax="[SupportTubeR2]-[Tol]"           dz="[SupportTubeL]" 
         //            startPhi="0*deg"                       deltaPhi="360*deg"/>
         DDTubs rs(solid);
         xos << "<Tubs name=\""  << rs.toString() << "\""
         << " rMin=\"" << rs.rIn() << "*mm\""
         << " rMax=\"" << rs.rOut() << "*mm\""
         << " dz=\"" << rs.zhalf() << "*mm\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\"/>"
         << std::endl;
         break;
      }
      case ddtrap: 
      {
         //    <Trapezoid name="UpL_CSC_for_TotemT1_Plane_2_5_7" dz="[PCB_Epoxy_Thick_3P]/2."  alp1="-[Up_Signal_Side_alpL_3P]" alp2="-[Up_Signal_Side_alpL_3P]"  
         //     bl1="[Max_Base_Signal_SideL_3P]/2." tl1="[Up_Min_Base_Signal_SideL_3P]/2." h1="[Up_Height_Signal_SideL_3P]/2."
         //     h2="[Up_Height_Signal_SideL_3P]/2." bl2="[Max_Base_Signal_SideL_3P]/2." tl2="[Up_Min_Base_Signal_SideL_3P]/2."/>
         DDTrap rs(solid);
         xos << "<Trapezoid name=\""  << rs.toString() << "\"" //rs.toString() << "\"" //
         << " dz=\"" << rs.halfZ() << "*mm\""
         << " theta=\"" << rs.theta()/deg << "*deg\""
         << " phi=\"" << rs.phi()/deg << "*deg\""
         << " h1=\"" << rs.y1() << "*mm\""
         << " bl1=\"" << rs.x1() << "*mm\""
         << " tl1=\"" << rs.x2() << "*mm\""
         << " alp1=\"" << rs.alpha1()/deg << "*deg\""
         << " h2=\"" << rs.y2() << "*mm\""
         << " bl2=\"" << rs.x3() << "*mm\""
         << " tl2=\"" << rs.x4() << "*mm\""
         << " alp2=\"" << rs.alpha2()/deg << "*deg\"/>"
         << std::endl;
         break;
      }
      case ddcons: 
      {
         DDCons rs(solid);
         xos << "<Cone name=\""  << rs.toString() << "\""
         << " dz=\"" << rs.zhalf() << "*mm\""
         << " rMin1=\"" << rs.rInMinusZ() << "*mm\""
         << " rMax1=\"" << rs.rOutMinusZ() << "*mm\""
         << " rMin2=\"" << rs.rInPlusZ() << "*mm\""
         << " rMax2=\"" << rs.rOutPlusZ() << "*mm\""
         << " startPhi=\"" << rs.phiFrom()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\"/>"
         << std::endl;
         break;
      }
      case ddpolycone_rz: 
      {
         DDPolycone rs(solid);
         xos << "<Polycone name=\""  << rs.toString() << "\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
         << std::endl;
         const std::vector<double> & zV(rs.zVec());
         const std::vector<double> & rV(rs.rVec());
         for ( size_t i = 0; i < zV.size(); ++i ) {
            xos << "<RZPoint r=\"" << rV[i] << "*mm\""
            << " z=\"" << zV[i] << "*mm\"/>"
            << std::endl;
         }
         xos << "</Polycone>" << std::endl;
         break;
      }
      case ddpolyhedra_rz: 
      {
         DDPolyhedra rs(solid);
         xos << "<Polyhedra name=\""  << rs.toString() << "\""
         << " numSide=\"" << rs.sides() << "\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
         << std::endl;
         const std::vector<double> & zV(rs.zVec());
         const std::vector<double> & rV(rs.rVec());
         for ( size_t i = 0; i < zV.size(); ++i ) {
            xos << "<RZPoint r=\"" << rV[i] << "*mm\""
            << " z=\"" << zV[i] << "*mm\"/>"
            << std::endl;
         }
         xos << "</Polyhedra>" << std::endl;
         break;
      }
      case ddpolycone_rrz:
      {
         //   <Polycone name="OCMS" startPhi="0*deg" deltaPhi="360*deg" >
         //    <ZSection z="-[CMSZ1]"  rMin="[Rmin]"  rMax="[CMSR2]" />
         //    <ZSection z="-[HallZ]"  rMin="[Rmin]"  rMax="[CMSR2]" /> 
         //    <ZSection z="-[HallZ]"  rMin="[Rmin]"  rMax="[HallR]" />
         //    <ZSection z="[HallZ]"   rMin="[Rmin]"  rMax="[HallR]" />
         //    <ZSection z="[HallZ]"   rMin="[Rmin]"  rMax="[CMSR2]" />
         //    <ZSection z="[CMSZ1]"   rMin="[Rmin]"  rMax="[CMSR2]" />
         DDPolycone rs(solid);
         xos << "<Polycone name=\""  << rs.toString() << "\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
         << std::endl;
         const std::vector<double> & zV(rs.zVec());
         const std::vector<double> & rMinV(rs.rMinVec());
         const std::vector<double> & rMaxV(rs.rMaxVec());
         for ( size_t i = 0; i < zV.size(); ++i ) {
            xos << "<ZSection z=\"" << zV[i] << "*mm\""
            << " rMin=\"" << rMinV[i] << "*mm\""
            << " rMax=\"" << rMaxV[i] << "*mm\"/>"
            << std::endl;
         }
         xos << "</Polycone>" << std::endl;
         break;
      }
      case ddpolyhedra_rrz:
      {
         DDPolyhedra rs(solid);
         xos << "<Polyhedra name=\""  << rs.toString() << "\""
         << " numSide=\"" << rs.sides() << "\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\">"
         << std::endl;
         const std::vector<double> & zV(rs.zVec());
         const std::vector<double> & rMinV(rs.rMinVec());
         const std::vector<double> & rMaxV(rs.rMaxVec());
         for ( size_t i = 0; i < zV.size(); ++i ) {
            xos << "<ZSection z=\"" << zV[i] << "*mm\""
            << " rMin=\"" << rMinV[i] << "*mm\""
            << " rMax=\"" << rMaxV[i] << "*mm\"/>"
            << std::endl;
         }
         xos << "</Polyhedra>" << std::endl;
         break;
      }
      case ddpseudotrap:
      {
         // <PseudoTrap name="YE3_b" dx1="0.395967*m" dx2="1.86356*m" dy1="0.130*m" dy2="0.130*m" dz="2.73857*m" radius="-1.5300*m" atMinusZ="true"/> 
         DDPseudoTrap rs(solid);
         xos << "<PseudoTrap name=\""  << rs.toString() << "\""
         << " dx1=\"" << rs.x1() << "*mm\""
         << " dx2=\"" << rs.x2() << "*mm\""
         << " dy1=\"" << rs.y1() << "*mm\""
         << " dy2=\"" << rs.y2() << "*mm\""
         << " dz=\"" << rs.halfZ() << "*mm\""
         << " radius=\"" << rs.radius() << "*mm\""
         << " atMinusZ=\"" << ( rs.atMinusZ() ? "true" : "false" ) << "\"/>"
         << std::endl;
         break;
      }
      case ddtrunctubs:
      {
         // <TruncTubs name="trunctubs1" zHalf="50*cm" rMin="20*cm" rMax="40*cm" startPhi="0*deg" deltaPhi="90*deg" cutAtStart="25*cm" cutAtDelta="35*cm"/>
         DDTruncTubs rs(solid);
         xos << "<TruncTubs name=\""  << rs.toString() << "\""
         << " zHalf=\"" << rs.zHalf() << "*mm\""
         << " rMin=\"" << rs.rIn() << "*mm\""
         << " rMax=\"" << rs.rOut() << "*mm\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\""
         << " cutAtStart=\"" << rs.cutAtStart() << "*mm\""
         << " cutAtDelta=\"" << rs.cutAtDelta() << "*mm\""
         << " cutInside=\"" << ( rs.cutInside() ? "true" : "false" ) << "\"/>"
         << std::endl;
         break;
      }
      case ddshapeless:
      {
         DDShapelessSolid rs(solid);
         xos << "<ShapelessSolid name=\""  << rs.toString() << "\"/>"
         << std::endl;
         break;
      }
      case ddtorus:
      {
         // <Torus name="torus" innerRadius="7.5*cm" outerRadius="10*cm" torusRadius="30*cm" startPhi="0*deg" deltaPhi="360*deg"/>
         DDTorus rs(solid);
         xos << "<Torus name=\""  << rs.toString() << "\""
         << " innerRadius=\"" << rs.rMin() << "*mm\""
         << " outerRadius=\"" << rs.rMax() << "*mm\""
         << " torusRadius=\"" << rs.rTorus() << "*mm\""
         << " startPhi=\"" << rs.startPhi()/deg << "*deg\""
         << " deltaPhi=\"" << rs.deltaPhi()/deg << "*deg\"/>"
         << std::endl;
         break;
      }
         //       return new PSolid( pstrs(solid.toString()), solid.parameters()
         //              , solid.shape(), pstrs(""), pstrs(""), pstrs("") );
      case dd_not_init:
      default:
         throw cms::Exception("DDException") << "DDCoreToDDXMLOutput::solid(...) either not inited or no such solid.";
         break;
   }
}

void DDCoreToDDXMLOutput::specpar	(	const DDSpecifics &	sp,
		std::ostream &	xos
	)

Definition at line 395 of file DDCoreToDDXMLOutput.cc.

References i, DDValue::isEvaluated(), DDValue::name(), alignCSCRings::s, DDSpecifics::selection(), DDValue::size(), DDSpecifics::specifics(), DDValue::strings(), DDBase< N, C >::toString(), and findQualityFiles::v.

Referenced by OutputDDToDDL::beginRun(), and OutputMagneticFieldDDToDDL::beginRun().

{   
   xos << "<SpecPar name=\"" << sp.toString() << "\" eval=\"false\">" << std::endl;
   
   // ========...  all the selection strings out as strings by using the DDPartSelection's std::ostream function...
   for( const auto& psit : sp.selection()) 
   {
      xos << "<PartSelector path=\"" << psit << "\"/>" << std::endl;
   }
   
   // =========  ... and iterate over all DDValues...
   for( const auto& vit : sp.specifics()) 
   {
      const DDValue & v = vit.second;
      size_t s=v.size();
      size_t i=0;
      // ============  ... all actual values with the same name
      const std::vector<std::string>& strvec = v.strings();
      if( v.isEvaluated()) 
      {
         for(; i<s; ++i) 
         {
            xos << "<Parameter name=\"" << v.name() << "\""
            << " value=\"" << v[i] << "\""
            << " eval=\"true\"/>" << std::endl;
         }
      } 
      else 
      {
         for(; i<s; ++i ) 
         {
            xos << "<Parameter name=\"" << v.name() << "\""
            << " value=\"" << strvec[i] << "\""
            << " eval=\"false\"/>" << std::endl;
         }
      }
      
   }
   xos << "</SpecPar>" << std::endl;
}

void DDCoreToDDXMLOutput::specpar	(	const std::pair< DDsvalues_type, std::set< const DDPartSelection * > > &	pssv,
		std::ostream &	xos
	)

Definition at line 436 of file DDCoreToDDXMLOutput.cc.

References i, DDValue::isEvaluated(), DDValue::name(), alignCSCRings::s, DDValue::size(), AlCaHLTBitMon_QueryRunRegistry::string, DDValue::strings(), and findQualityFiles::v.

{
   static const std::string madeName("specparname");
   static int numspecpars(0);
   std::ostringstream ostr;
   ostr << numspecpars++;
   std::string spname = madeName + ostr.str(); 
   xos << "<SpecPar name=\"" << spname << "\" eval=\"false\">" << std::endl;
   for( const auto& psit : pssv.second ) {
      xos << "<PartSelector path=\"" << *psit << "\"/>" << std::endl;
   }
   
   // =========  ... and iterate over all DDValues...
   for( const auto& vit : pssv.first ) 
   {
      const DDValue & v = vit.second;
      size_t s=v.size();
      size_t i=0;
      // ============  ... all actual values with the same name
      const std::vector<std::string>& strvec = v.strings();
      if( v.isEvaluated() ) 
      {
         for(; i<s; ++i) 
         {
            xos << "<Parameter name=\"" << v.name() << "\""
            << " value=\"" << v[i] << "\""
            << " eval=\"true\"/>" << std::endl;
         }
      } 
      else 
      {
         for(; i<s; ++i ) 
         {
            xos << "<Parameter name=\"" << v.name() << "\""
            << " value=\"" << strvec[i] << "\""
            << " eval=\"false\"/>" << std::endl;
         }
      }
   }
   
   xos << "</SpecPar>" << std::endl;
}

Member Data Documentation

std::string DDCoreToDDXMLOutput::ns_

Definition at line 45 of file DDCoreToDDXMLOutput.h.

Referenced by OutputDDToDDL::beginRun(), and OutputMagneticFieldDDToDDL::beginRun().

double DDCoreToDDXMLOutput::tol_

Definition at line 46 of file DDCoreToDDXMLOutput.h.