#include <EwkElecDQM.h>

Inheritance diagram for EwkElecDQM:

Public Member Functions
virtual void	analyze (const edm::Event &, const edm::EventSetup &)

void	bookHistograms (DQMStore::IBooker &, edm::Run const &, edm::EventSetup const &) override

double	calcDeltaPhi (double phi1, double phi2)

void	dqmBeginRun (const edm::Run &, const edm::EventSetup &)

virtual void	endRun (const edm::Run &, const edm::EventSetup &)

	EwkElecDQM (const edm::ParameterSet &)

Public Member Functions inherited from DQMEDAnalyzer
virtual void	beginRun (edm::Run const &, edm::EventSetup const &) final

virtual void	beginStream (edm::StreamID id) final

	DQMEDAnalyzer (void)

virtual void	endLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

virtual void	endRunSummary (edm::Run const &, edm::EventSetup const &, dqmDetails::NoCache *) const final

uint32_t	streamId () const

Public Member Functions inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
	EDAnalyzer ()=default

Public Member Functions inherited from edm::stream::EDAnalyzerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

	EDAnalyzerBase ()

ModuleDescription const &	moduleDescription () const

virtual	~EDAnalyzerBase ()

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (std::string const &iProcessName, std::string const &iModuleLabel, bool iPrint, std::vector< char const * > &oModuleLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Private Attributes
edm::EDGetTokenT< reco::BeamSpot >	beamSpotTag_

MonitorElement *	detainbarrel_after_

MonitorElement *	detainbarrel_before_

double	detainCutBarrel_

double	detainCutEndcap_

MonitorElement *	detainendcap_after_

MonitorElement *	detainendcap_before_

MonitorElement *	ecalisobarrel_after_

MonitorElement *	ecalisobarrel_before_

double	ecalIsoCutBarrel_

double	ecalIsoCutEndcap_

MonitorElement *	ecalisoendcap_after_

MonitorElement *	ecalisoendcap_before_

double	eJetMin_

edm::EDGetTokenT< edm::View < reco::GsfElectron > >	elecTag_

const std::vector< std::string >	elecTrig_

MonitorElement *	eta_after_

MonitorElement *	eta_before_

double	etaCut_

MonitorElement *	hcalisobarrel_after_

MonitorElement *	hcalisobarrel_before_

double	hcalIsoCutBarrel_

double	hcalIsoCutEndcap_

MonitorElement *	hcalisoendcap_after_

MonitorElement *	hcalisoendcap_before_

HLTPrescaleProvider	hltPrescaleProvider_

MonitorElement *	invmass_after_

MonitorElement *	invmass_before_

MonitorElement *	invmassPU_afterZ_

MonitorElement *	invmassPU_before_

bool	isValidHltConfig_

MonitorElement *	jet_et_after_

MonitorElement *	jet_et_before_

MonitorElement *	jet_eta_after_

MonitorElement *	jet_eta_before_

edm::InputTag	jetTag_

edm::EDGetTokenT< edm::View < reco::Jet > >	jetToken_

MonitorElement *	met_after_

MonitorElement *	met_before_

bool	metIncludesMuons_

double	metMax_

double	metMin_

edm::InputTag	metTag_

edm::EDGetTokenT< edm::View < reco::MET > >	metToken_

MonitorElement *	mt_after_

MonitorElement *	mt_before_

double	mtMax_

double	mtMin_

unsigned int	nall

unsigned int	neid

MonitorElement *	nelectrons_after_

MonitorElement *	nelectrons_before_

unsigned int	nGoodElectrons

unsigned int	niso

int	nJetMax_

MonitorElement *	njets_after_

MonitorElement *	njets_before_

MonitorElement *	npvs_afterZ_

MonitorElement *	npvs_before_

unsigned int	nrec

unsigned int	nsel

MonitorElement *	pt_after_

MonitorElement *	pt_before_

double	ptCut_

unsigned int	PUBinCount_

unsigned int	PUMax_

MonitorElement *	sieiebarrel_after_

MonitorElement *	sieiebarrel_before_

double	sieieCutBarrel_

double	sieieCutEndcap_

MonitorElement *	sieieendcap_after_

MonitorElement *	sieieendcap_before_

MonitorElement *	trig_after_

MonitorElement *	trig_before_

edm::EDGetTokenT < edm::TriggerResults >	trigTag_

MonitorElement *	trkisobarrel_after_

MonitorElement *	trkisobarrel_before_

double	trkIsoCutBarrel_

double	trkIsoCutEndcap_

MonitorElement *	trkisoendcap_after_

MonitorElement *	trkisoendcap_before_

edm::EDGetTokenT< edm::View < reco::Vertex > >	vertexTag_

Additional Inherited Members
Public Types inherited from edm::stream::EDAnalyzer< edm::RunSummaryCache< dqmDetails::NoCache >, edm::LuminosityBlockSummaryCache< dqmDetails::NoCache > >
typedef CacheContexts< T...>	CacheTypes

typedef CacheTypes::GlobalCache	GlobalCache

typedef AbilityChecker< T...>	HasAbility

typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache

typedef LuminosityBlockContextT < LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext

typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache

typedef CacheTypes::RunCache	RunCache

typedef RunContextT< RunCache, GlobalCache >	RunContext

typedef CacheTypes::RunSummaryCache	RunSummaryCache

Public Types inherited from edm::stream::EDAnalyzerBase
typedef EDAnalyzerAdaptorBase	ModuleType

Public Types inherited from edm::EDConsumerBase
typedef ProductLabels	Labels

Static Public Member Functions inherited from DQMEDAnalyzer
static std::shared_ptr < dqmDetails::NoCache >	globalBeginLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const *)

static std::shared_ptr < dqmDetails::NoCache >	globalBeginRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const *)

static void	globalEndLuminosityBlockSummary (edm::LuminosityBlock const &, edm::EventSetup const &, LuminosityBlockContext const , dqmDetails::NoCache )

static void	globalEndRunSummary (edm::Run const &, edm::EventSetup const &, RunContext const , dqmDetails::NoCache )

Static Public Member Functions inherited from edm::stream::EDAnalyzerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

DQM offline for EWK Electrons

Definition at line 29 of file EwkElecDQM.h.

Constructor & Destructor Documentation

EwkElecDQM::EwkElecDQM ( const edm::ParameterSet & cfg )

Definition at line 41 of file EwkElecDQM.cc.

References isValidHltConfig_.

     :
       // Input collections
       metTag_(cfg.getUntrackedParameter<edm::InputTag>("METTag",
                                                        edm::InputTag("met"))),
       jetTag_(cfg.getUntrackedParameter<edm::InputTag>(
           "JetTag", edm::InputTag("sisCone5CaloJets"))),
       trigTag_(consumes<edm::TriggerResults>(
           cfg.getUntrackedParameter<edm::InputTag>(
               "TrigTag", edm::InputTag("TriggerResults::HLT")))),
       elecTag_(consumes<edm::View<reco::GsfElectron> >(
           cfg.getUntrackedParameter<edm::InputTag>(
               "ElecTag", edm::InputTag("gsfElectrons")))),
       metToken_(consumes<edm::View<reco::MET> >(
           cfg.getUntrackedParameter<edm::InputTag>("METTag",
                                                    edm::InputTag("met")))),
       jetToken_(consumes<edm::View<reco::Jet> >(
           cfg.getUntrackedParameter<edm::InputTag>(
               "JetTag", edm::InputTag("sisCone5CaloJets")))),
       vertexTag_(consumes<edm::View<reco::Vertex> >(
           cfg.getUntrackedParameter<edm::InputTag>(
               "VertexTag", edm::InputTag("offlinePrimaryVertices")))),
       beamSpotTag_(
           consumes<reco::BeamSpot>(cfg.getUntrackedParameter<edm::InputTag>(
               "BeamSpotTag", edm::InputTag("BeamSpot")))),
 
       // Main cuts
       //      muonTrig_(cfg.getUntrackedParameter<std::string> ("MuonTrig",
       // "HLT_Mu9")),
       // elecTrig_(cfg.getUntrackedParameter<std::vector< std::string >
       // >("ElecTrig", "HLT_Ele10_SW_L1R")),
       elecTrig_(
           cfg.getUntrackedParameter<std::vector<std::string> >("ElecTrig")),
       //      ptCut_(cfg.getUntrackedParameter<double>("PtCut", 25.)),
       ptCut_(cfg.getUntrackedParameter<double>("PtCut", 10.)),
       //      etaCut_(cfg.getUntrackedParameter<double>("EtaCut", 2.1)),
       etaCut_(cfg.getUntrackedParameter<double>("EtaCut", 2.4)),
       sieieCutBarrel_(cfg.getUntrackedParameter<double>("SieieBarrel", 0.01)),
       sieieCutEndcap_(cfg.getUntrackedParameter<double>("SieieEndcap", 0.028)),
       detainCutBarrel_(
           cfg.getUntrackedParameter<double>("DetainBarrel", 0.0071)),
       detainCutEndcap_(
           cfg.getUntrackedParameter<double>("DetainEndcap", 0.0066)),
       //      isRelativeIso_(cfg.getUntrackedParameter<bool>("IsRelativeIso",
       // true)),
       //      isCombinedIso_(cfg.getUntrackedParameter<bool>("IsCombinedIso",
       // false)),
       //      isoCut03_(cfg.getUntrackedParameter<double>("IsoCut03", 0.1)),
       ecalIsoCutBarrel_(
           cfg.getUntrackedParameter<double>("EcalIsoCutBarrel", 5.7)),
       ecalIsoCutEndcap_(
           cfg.getUntrackedParameter<double>("EcalIsoCutEndcap", 5.0)),
       hcalIsoCutBarrel_(
           cfg.getUntrackedParameter<double>("HcalIsoCutBarrel", 8.1)),
       hcalIsoCutEndcap_(
           cfg.getUntrackedParameter<double>("HcalIsoCutEndcap", 3.4)),
       trkIsoCutBarrel_(
           cfg.getUntrackedParameter<double>("TrkIsoCutBarrel", 7.2)),
       trkIsoCutEndcap_(
           cfg.getUntrackedParameter<double>("TrkIsoCutEndcap", 5.1)),
       mtMin_(cfg.getUntrackedParameter<double>("MtMin", -999999)),
       mtMax_(cfg.getUntrackedParameter<double>("MtMax", 999999.)),
       metMin_(cfg.getUntrackedParameter<double>("MetMin", -999999.)),
       metMax_(cfg.getUntrackedParameter<double>("MetMax", 999999.)),
       //      acopCut_(cfg.getUntrackedParameter<double>("AcopCut", 2.)),
 
       // Muon quality cuts
       //      dxyCut_(cfg.getUntrackedParameter<double>("DxyCut", 0.2)),
       //      normalizedChi2Cut_(cfg.getUntrackedParameter<double>("NormalizedChi2Cut",
       // 10.)),
       //      trackerHitsCut_(cfg.getUntrackedParameter<int>("TrackerHitsCut",
       // 11)),
       //      isAlsoTrackerMuon_(cfg.getUntrackedParameter<bool>("IsAlsoTrackerMuon",
       // true)),
 
       // Z rejection
       //      ptThrForZ1_(cfg.getUntrackedParameter<double>("PtThrForZ1", 20.)),
       //      ptThrForZ2_(cfg.getUntrackedParameter<double>("PtThrForZ2", 10.)),
 
       // Top rejection
       eJetMin_(cfg.getUntrackedParameter<double>("EJetMin", 999999.)),
       nJetMax_(cfg.getUntrackedParameter<int>("NJetMax", 999999)),
       PUMax_(cfg.getUntrackedParameter<unsigned int>("PUMax", 60)),
       PUBinCount_(cfg.getUntrackedParameter<unsigned int>("PUBinCount", 12)),
       hltPrescaleProvider_(cfg, consumesCollector(), *this)
       //       caloJetCollection_(cfg.getUntrackedParameter<edm:InputTag>("CaloJetCollection","sisCone5CaloJets"))
 {
   isValidHltConfig_ = false;
 }

Member Function Documentation

void EwkElecDQM::analyze	(	const edm::Event &	ev,
		const edm::EventSetup &	iSet
	)

virtual

Implements edm::stream::EDAnalyzerBase.

Definition at line 384 of file EwkElecDQM.cc.

                                                                 {
 
   // Reset global event selection flags
   bool rec_sel = false;
   bool eid_sel = false;
   bool iso_sel = false;
   bool all_sel = false;
 
   // Electron collection
   Handle<View<GsfElectron> > electronCollection;
   if (!ev.getByToken(elecTag_, electronCollection)) {
     // LogWarning("") << ">>> Electron collection does not exist !!!";
     return;
   }
   unsigned int electronCollectionSize = electronCollection->size();
 
   // Beam spot
   Handle<reco::BeamSpot> beamSpotHandle;
   if (!ev.getByToken(beamSpotTag_, beamSpotHandle)) {
     // LogWarning("") << ">>> No beam spot found !!!";
     return;
   }
 
   // MET
   double met_px = 0.;
   double met_py = 0.;
   Handle<View<MET> > metCollection;
   if (!ev.getByToken(metToken_, metCollection)) {
     // LogWarning("") << ">>> MET collection does not exist !!!";
     return;
   }
 
   const MET& met = metCollection->at(0);
   met_px = met.px();
   met_py = met.py();
   //       if (!metIncludesMuons_) {
   //             for (unsigned int i=0; i<muonCollectionSize; i++) {
   //                   const Muon& mu = muonCollection->at(i);
   //                   if (!mu.isGlobalMuon()) continue;
   //                   met_px -= mu.px();
   //                   met_py -= mu.py();
   //             }
   //       }
   double met_et = sqrt(met_px * met_px + met_py * met_py);
   LogTrace("") << ">>> MET, MET_px, MET_py: " << met_et << ", " << met_px
                << ", " << met_py << " [GeV]";
   met_before_->Fill(met_et);
 
   // Vertices in the event
   int npvCount = 0;
   Handle<View<reco::Vertex> > vertexCollection;
   if (!ev.getByToken(vertexTag_, vertexCollection)) {
     LogError("") << ">>> Vertex collection does not exist !!!";
     return;
   }
 
   for (unsigned int i = 0; i < vertexCollection->size(); i++) {
     const Vertex& vertex = vertexCollection->at(i);
     if (vertex.isValid()) npvCount++;
   }
   npvs_before_->Fill(npvCount);
 
   // Trigger
   Handle<TriggerResults> triggerResults;
   if (!ev.getByToken(trigTag_, triggerResults)) {
     // LogWarning("") << ">>> TRIGGER collection does not exist !!!";
     return;
   }
   const edm::TriggerNames& trigNames = ev.triggerNames(*triggerResults);
   bool trigger_fired = false;
 
   HLTConfigProvider const&  hltConfigProvider = hltPrescaleProvider_.hltConfigProvider();
 
   /* very old code
   for (unsigned int i=0; i<triggerResults->size(); i++) {
         if (triggerResults->accept(i)) {
               LogTrace("") << "Accept by: " << i << ", Trigger: " <<
   trigNames.triggerName(i);
         }
   }
   */
 
   // the following gives error on CRAFT08 data where itrig1=19 (vector index out
   // of range)
   /*
   int itrig1 = trigNames.triggerIndex(muonTrig_);
   if (triggerResults->accept(itrig1)) trigger_fired = true;
   */
   // suggested replacement: lm250909
   /*  Fix buggy trigger logic
   for (unsigned int i=0; i<triggerResults->size(); i++)
     {
       std::string trigName = trigNames.triggerName(i);
       bool found=false;
 
 //    for (unsigned int j = 0; j < elecTrig_.size(); j++)
 //      {
 //        if ( trigName == elecTrig_.at(j) && triggerResults->accept(i))
 //      {
 //        trigger_fired = true;
 //      }
 //      }
 
 
      for(unsigned int index=0; index<elecTrig_.size() && found==false; index++)
 {
        size_t trigPath = trigName.find(elecTrig_.at(index)); // 0 if found, pos
 if not
                if (trigPath==0) found=true;
           }
           if(!found) continue;
 
           bool prescaled=false;
           for (unsigned int ps= 0; ps<  hltConfigProvider.prescaleSize();
 ps++){
               const unsigned int prescaleValue =
 hltConfigProvider.prescaleValue(ps, trigName) ;
               if (prescaleValue != 1) prescaled =true;
           }
 
           if(triggerResults->accept(i) && !prescaled) trigger_fired=true;
 
     }
   */
 
   // get the prescale set for this event
   const int prescaleSet = hltPrescaleProvider_.prescaleSet(ev, iSet);
   if (prescaleSet == -1) {
     LogTrace("") << "Failed to determine prescaleSet\n";
     // std::cout << "Failed to determine prescaleSet. Check cmsRun GlobalTag\n";
     return;
   }
 
   for (unsigned int i = 0;
        (i < triggerResults->size()) && (trigger_fired == false); i++) {
     // skip trigger, if it did not fire
     if (!triggerResults->accept(i)) continue;
 
     // skip trigger, if it is not on our list
     bool found = false;
     const std::string trigName = trigNames.triggerName(i);
     for (unsigned int index = 0; index < elecTrig_.size() && found == false;
          index++) {
       if (trigName.find(elecTrig_.at(index)) == 0) found = true;
     }
     if (!found) continue;
 
     // skip trigger, if it is prescaled
     if (hltConfigProvider.prescaleValue(prescaleSet, trigName) != 1) continue;
 
     // std::cout << "found unprescaled trigger that fired: " << trigName <<
     // "\n";
     trigger_fired = true;
   }
 
   LogTrace("") << ">>> Trigger bit: " << trigger_fired << " for one of ( ";
   for (unsigned int k = 0; k < elecTrig_.size(); k++) {
     LogTrace("") << elecTrig_.at(k) << " ";
   }
   LogTrace("") << ")";
   trig_before_->Fill(trigger_fired);
 
   // Jet collection
   Handle<View<Jet> > jetCollection;
   if (!ev.getByToken(jetToken_, jetCollection)) {
     // LogError("") << ">>> JET collection does not exist !!!";
     return;
   }
   float electron_et = -8.0;
   float electron_eta = -8.0;
   float electron_phi = -8.0;
   float electron2_et = -9.0;
   float electron2_eta = -9.0;
   float electron2_phi = -9.0;
   // need to get some electron info so jets can be cleaned of them
   for (unsigned int i = 0; i < electronCollectionSize; i++) {
     const GsfElectron& elec = electronCollection->at(i);
 
     if (i < 1) {
       electron_et = elec.pt();
       electron_eta = elec.eta();
       electron_phi = elec.phi();
     }
     if (i == 2) {
       electron2_et = elec.pt();
       electron2_eta = elec.eta();
       electron2_phi = elec.phi();
     }
   }
 
   float jet_et = -8.0;
   float jet_eta = -8.0;
   int jet_count = 0;
   float jet2_et = -9.0;
   unsigned int jetCollectionSize = jetCollection->size();
   int njets = 0;
   for (unsigned int i = 0; i < jetCollectionSize; i++) {
     const Jet& jet = jetCollection->at(i);
 
     float jet_current_et = jet.et();
     //  cout << "jet_current_et " << jet_current_et << endl;
     // if it overlaps with electron, it is not a jet
     if (electron_et > 0.0 && fabs(jet.eta() - electron_eta) < 0.2 &&
         calcDeltaPhi(jet.phi(), electron_phi) < 0.2)
       continue;
     if (electron2_et > 0.0 && fabs(jet.eta() - electron2_eta) < 0.2 &&
         calcDeltaPhi(jet.phi(), electron2_phi) < 0.2)
       continue;
 
     // if it has too low Et, throw away
     //  if (jet_current_et < eJetMin_) continue; //Keep if only want to plot
     // above jet cut
 
     if (jet.et() > eJetMin_) {
       njets++;
       jet_count++;
     }
     if (jet_current_et > jet_et) {
       jet2_et = jet_et;   // 2nd highest jet get's et from current highest
       jet_et = jet.et();  // current highest jet gets et from the new highest
       jet_eta = jet.eta();
     } else if (jet_current_et > jet2_et) {
       jet2_et = jet.et();
     }
   }
 
   // Fill After all electron cuts (or both before and after)
   if (jet_et > 10)  // don't want low energy "jets"
   {
     jet_et_before_->Fill(jet_et);
     //    jet2_et_before_  ->Fill(jet2_et);
     jet_eta_before_->Fill(jet_eta);
   }
 
   LogTrace("") << ">>> Total number of jets: " << jetCollectionSize;
   LogTrace("") << ">>> Number of jets above " << eJetMin_
                << " [GeV]: " << njets;
   njets_before_->Fill(njets);
 
   // Start counting
   nall++;
 
   // Histograms per event should be done only once, so keep track of them
   bool hlt_hist_done = false;
   // bool minv_hist_done = false;
   bool met_hist_done = false;
   //       bool nz1_hist_done = false;
   //       bool nz2_hist_done = false;
   bool njets_hist_done = false;
 
   // Central selection criteria
   // const int NFLAGS = 13; // number of individual selection criteria
   const int NFLAGS = 11;  // number of individual selection criteria
   // 0: pt cut           | rec
   // 1: eta cut          | rec
   // 2: sieie            | eid
   // 3: detain           | eid
   // 4: ecal iso         | iso
   // 5: hcal iso         | iso
   // 6: trk iso          | iso
   // 7: trigger fired    | hlt/all
   bool electron_sel[NFLAGS];
 
   // for invariant mass calculation
   // keep track of highest-pt electrons for initial (RECO) electrons
   // and "good" electrons (passing all cuts)
   // first array dimension is for first or second good electron
   // second array dimension is for relevant quantities of good electron
   //    [0]: 1 for electron found or 0 for not found (if 0, no other quantities
   // filled)
   //    [1]: mSqr
   //    [2]: E
   //    [3]: px
   //    [4]: py
   //    [5]: pz
   // inv mass = sqrt(m_1^2 + m_2^2 + 2*(E_1*E_2 - (px1*px2 + py1*py2 + pz1+pz2)
   // ) )
   double electron[2][6];
   double goodElectron[2][6];
   nGoodElectrons = 0;
   for (unsigned int i = 0; i < 2; i++) {
     for (unsigned int j = 0; j < 6; j++) {
       electron[i][j] = 0.;
       goodElectron[i][j] = 0.;
     }
   }
 
   for (unsigned int i = 0; i < electronCollectionSize; i++) {
     for (int j = 0; j < NFLAGS; ++j) {
       electron_sel[j] = false;
     }
 
     const GsfElectron& elec = electronCollection->at(i);
     // if (!mu.isGlobalMuon()) continue;
     // if (mu.globalTrack().isNull()) continue;
     // if (mu.innerTrack().isNull()) continue;
 
     LogTrace("") << "> elec: processing electron number " << i << "...";
     // reco::TrackRef gm = mu.globalTrack();
     // reco::TrackRef tk = mu.innerTrack();
     // should have stuff for electron track?
 
     if (i < 2) {
       electron[i][0] = 1.;
       electron[i][1] = elec.massSqr();
       electron[i][2] = elec.energy();
       electron[i][3] = elec.px();
       electron[i][4] = elec.py();
       electron[i][5] = elec.pz();
     }
 
     // Pt,eta cuts
     double pt = elec.pt();
     double px = elec.px();
     double py = elec.py();
     double eta = elec.eta();
     LogTrace("") << "\t... pt, eta: " << pt << " [GeV], " << eta;
     ;
     if (pt > ptCut_) electron_sel[0] = true;
     if (fabs(eta) < etaCut_) electron_sel[1] = true;
 
     bool isBarrel = false;
     bool isEndcap = false;
     if (eta < 1.4442 && eta > -1.4442) {
       isBarrel = true;
     } else if ((eta > 1.56 && eta < 2.4) || (eta < -1.56 && eta > -2.4)) {
       isEndcap = true;
     }
 
     //             // d0, chi2, nhits quality cuts
     //             double dxy = tk->dxy(beamSpotHandle->position());
     //             double normalizedChi2 = gm->normalizedChi2();
     //             double trackerHits = tk->numberOfValidHits();
     //             LogTrace("") << "\t... dxy, normalizedChi2, trackerHits,
     // isTrackerMuon?: " << dxy << " [cm], " << normalizedChi2 << ", " <<
     // trackerHits << ", " << mu.isTrackerMuon();
     //             if (fabs(dxy)<dxyCut_) muon_sel[2] = true;
     //             if (normalizedChi2<normalizedChi2Cut_) muon_sel[3] = true;
     //             if (trackerHits>=trackerHitsCut_) muon_sel[4] = true;
     //             if (mu.isTrackerMuon()) muon_sel[5] = true;
 
     pt_before_->Fill(pt);
     eta_before_->Fill(eta);
     //             dxy_before_->Fill(dxy);
     //             chi2_before_->Fill(normalizedChi2);
     //             nhits_before_->Fill(trackerHits);
     //             tkmu_before_->Fill(mu.isTrackerMuon());
 
     // Electron ID cuts
     double sieie = (double)elec.sigmaIetaIeta();
     double detain =
         (double)elec.deltaEtaSuperClusterTrackAtVtx();  // think this is detain
     if (sieie < sieieCutBarrel_ && isBarrel) electron_sel[2] = true;
     if (sieie < sieieCutEndcap_ && isEndcap) electron_sel[2] = true;
     if (detain < detainCutBarrel_ && isBarrel) electron_sel[3] = true;
     if (detain < detainCutEndcap_ && isEndcap) electron_sel[3] = true;
     if (isBarrel) {
       LogTrace("") << "\t... sieie value " << sieie << " (barrel), pass? "
                    << electron_sel[2];
       LogTrace("") << "\t... detain value " << detain << " (barrel), pass? "
                    << electron_sel[3];
     } else if (isEndcap) {
       LogTrace("") << "\t... sieie value " << sieie << " (endcap), pass? "
                    << electron_sel[2];
       LogTrace("") << "\t... detain value " << detain << " (endcap), pass? "
                    << electron_sel[2];
     }
 
     if (isBarrel) {
       sieiebarrel_before_->Fill(sieie);
       detainbarrel_before_->Fill(detain);
     } else if (isEndcap) {
       sieieendcap_before_->Fill(sieie);
       detainendcap_before_->Fill(detain);
     }
 
     // Isolation cuts
     // double isovar = mu.isolationR03().sumPt;
     double ecalisovar = elec.dr03EcalRecHitSumEt();  // picked one set!
     double hcalisovar = elec.dr03HcalTowerSumEt();   // try others if
     double trkisovar = elec.dr04TkSumPt();           // doesn't work
     // if (isCombinedIso_) {
     // isovar += mu.isolationR03().emEt;
     // isovar += mu.isolationR03().hadEt;
     //}
     // if (isRelativeIso_) isovar /= pt;
     if (ecalisovar < ecalIsoCutBarrel_ && isBarrel) electron_sel[4] = true;
     if (ecalisovar < ecalIsoCutEndcap_ && isEndcap) electron_sel[4] = true;
     if (hcalisovar < hcalIsoCutBarrel_ && isBarrel) electron_sel[5] = true;
     if (hcalisovar < hcalIsoCutEndcap_ && isEndcap) electron_sel[5] = true;
     if (trkisovar < trkIsoCutBarrel_ && isBarrel) electron_sel[6] = true;
     if (trkisovar < trkIsoCutEndcap_ && isEndcap) electron_sel[6] = true;
     if (isBarrel) {
       LogTrace("") << "\t... ecal isolation value " << ecalisovar
                    << " (barrel), pass? " << electron_sel[4];
       LogTrace("") << "\t... hcal isolation value " << hcalisovar
                    << " (barrel), pass? " << electron_sel[5];
       LogTrace("") << "\t... trk isolation value " << trkisovar
                    << " (barrel), pass? " << electron_sel[6];
     } else if (isEndcap) {
       LogTrace("") << "\t... ecal isolation value " << ecalisovar
                    << " (endcap), pass? " << electron_sel[4];
       LogTrace("") << "\t... hcal isolation value " << hcalisovar
                    << " (endcap), pass? " << electron_sel[5];
       LogTrace("") << "\t... trk isolation value " << trkisovar
                    << " (endcap), pass? " << electron_sel[6];
     }
 
     // iso_before_->Fill(isovar);
     if (isBarrel) {
       ecalisobarrel_before_->Fill(ecalisovar);
       hcalisobarrel_before_->Fill(hcalisovar);
       trkisobarrel_before_->Fill(trkisovar);
     } else if (isEndcap) {
       ecalisoendcap_before_->Fill(ecalisovar);
       hcalisoendcap_before_->Fill(hcalisovar);
       trkisoendcap_before_->Fill(trkisovar);
     }
 
     // HLT
     if (trigger_fired) electron_sel[7] = true;
 
     //             // MET/MT cuts
     double w_et = met_et + pt;
     double w_px = met_px + px;
     double w_py = met_py + py;
 
     double massT = w_et * w_et - w_px * w_px - w_py * w_py;
     massT = (massT > 0) ? sqrt(massT) : 0;
 
     LogTrace("") << "\t... W mass, W_et, W_px, W_py: " << massT << ", " << w_et
                  << ", " << w_px << ", " << w_py << " [GeV]";
     if (massT > mtMin_ && massT < mtMax_) electron_sel[8] = true;
     mt_before_->Fill(massT);
     if (met_et > metMin_ && met_et < metMax_) electron_sel[9] = true;
 
     //             // Acoplanarity cuts
     //             Geom::Phi<double> deltaphi(mu.phi()-atan2(met_py,met_px));
     //             double acop = deltaphi.value();
     //             if (acop<0) acop = - acop;
     //             acop = M_PI - acop;
     //             LogTrace("") << "\t... acoplanarity: " << acop;
     //             if (acop<acopCut_) muon_sel[10] = true;
     //             acop_before_->Fill(acop);
 
     //             // Remaining flags (from global event information)
     //             if (nmuonsForZ1<1 || nmuonsForZ2<2) muon_sel[11] = true;
     if (njets <= nJetMax_) electron_sel[10] = true;
 
     // Collect necessary flags "per electron"
     int flags_passed = 0;
     bool rec_sel_this = true;
     bool eid_sel_this = true;
     bool iso_sel_this = true;
     bool all_sel_this = true;
     for (int j = 0; j < NFLAGS; ++j) {
       if (electron_sel[j]) flags_passed += 1;
       if (j < 2 && !electron_sel[j]) rec_sel_this = false;
       if (j < 4 && !electron_sel[j]) eid_sel_this = false;
       if (j < 7 && !electron_sel[j]) iso_sel_this = false;
       if (!electron_sel[j]) all_sel_this = false;
     }
 
     if (all_sel_this) {
       if (nGoodElectrons < 2) {
         goodElectron[nGoodElectrons][0] = 1.;
         goodElectron[nGoodElectrons][1] = elec.massSqr();
         goodElectron[nGoodElectrons][2] = elec.energy();
         goodElectron[nGoodElectrons][3] = elec.px();
         goodElectron[nGoodElectrons][4] = elec.py();
         goodElectron[nGoodElectrons][5] = elec.pz();
       }
       nGoodElectrons++;
     }
 
     //             // "rec" => pt,eta and quality cuts are satisfied
     //             if (rec_sel_this) rec_sel = true;
     //             // "iso" => "rec" AND "muon is isolated"
     //             if (iso_sel_this) iso_sel = true;
     //             // "hlt" => "iso" AND "event is triggered"
     //             if (hlt_sel_this) hlt_sel = true;
     //           // "all" => "met" AND "Z/top rejection cuts"
     //             if (all_sel_this) all_sel = true;
 
     // "rec" => pt,eta cuts are satisfied
     if (rec_sel_this) rec_sel = true;
     // "eid" => "rec" AND "electron passes ID"
     if (eid_sel_this) iso_sel = true;
     // "iso" => "eid" AND "electron is isolated"
     if (iso_sel_this) iso_sel = true;
     // "met" => "iso" AND "MET/MT"
     // "all" => "met" AND "event is triggered"
     if (all_sel_this) all_sel = true;
 
     // Do N-1 histograms now (and only once for global event quantities)
     if (flags_passed >= (NFLAGS - 1)) {
       if (!electron_sel[0] || flags_passed == NFLAGS) {
         pt_after_->Fill(pt);
       }
       if (!electron_sel[1] || flags_passed == NFLAGS) {
         eta_after_->Fill(eta);
       }
       if (!electron_sel[2] || flags_passed == NFLAGS) {
         if (isBarrel) {
           sieiebarrel_after_->Fill(sieie);
         } else if (isEndcap) {
           sieieendcap_after_->Fill(sieie);
         }
       }
       if (!electron_sel[3] || flags_passed == NFLAGS) {
         if (isBarrel) {
           detainbarrel_after_->Fill(detain);
         } else if (isEndcap) {
           detainendcap_after_->Fill(detain);
         }
       }
       if (!electron_sel[4] || flags_passed == NFLAGS) {
         if (isBarrel) {
           ecalisobarrel_after_->Fill(ecalisovar);
         } else if (isEndcap) {
           ecalisoendcap_after_->Fill(ecalisovar);
         }
       }
       if (!electron_sel[5] || flags_passed == NFLAGS) {
         if (isBarrel) {
           hcalisobarrel_after_->Fill(hcalisovar);
         } else if (isEndcap) {
           hcalisoendcap_after_->Fill(hcalisovar);
         }
       }
       if (!electron_sel[6] || flags_passed == NFLAGS) {
         if (isBarrel) {
           trkisobarrel_after_->Fill(trkisovar);
         } else if (isEndcap) {
           trkisoendcap_after_->Fill(trkisovar);
         }
       }
       //        if (!electron_sel[3] || flags_passed==NFLAGS)
       //          {
       //            detain_after_->Fill(detain);
       //          }
       //        if (!electron_sel[4] || flags_passed==NFLAGS)
       //          {
       //            ecaliso_after_->Fill(trackerHits);
       //          }
       //        if (!electron_sel[5] || flags_passed==NFLAGS)
       //          {
       //            tkelectr_after_->Fill(electr.isTrackerElectron());
       //          }
       //        if (!electron_sel[6] || flags_passed==NFLAGS)
       //          {
       //            iso_after_->Fill(isovar);
       //          }
       if (!electron_sel[7] || flags_passed == NFLAGS) {
         if (!hlt_hist_done) {
           trig_after_->Fill(trigger_fired);
         }
       }
       hlt_hist_done = true;
       if (!electron_sel[8] || flags_passed == NFLAGS) {
         mt_after_->Fill(massT);
       }
       if (!electron_sel[9] || flags_passed == NFLAGS) {
         if (!met_hist_done) {
           met_after_->Fill(met_et);
         }
       }
       met_hist_done = true;
       //                   if (!muon_sel[10] || flags_passed==NFLAGS)
       //                         acop_after_->Fill(acop);
       //                   if (!muon_sel[11] || flags_passed==NFLAGS)
       //                         if (!nz1_hist_done)
       // nz1_after_->Fill(nmuonsForZ1);
       //                         nz1_hist_done = true;
       //                   if (!muon_sel[11] || flags_passed==NFLAGS)
       //                         if (!nz2_hist_done)
       // nz2_after_->Fill(nmuonsForZ2);
       //                         nz2_hist_done = true;
       if (!electron_sel[10] || flags_passed == NFLAGS) {
         if (!njets_hist_done) {
           njets_after_->Fill(njets);
           if (jet_et > 10)  // don't want low energy "jets"
           {
             jet_et_after_->Fill(jet_et);
             jet_eta_after_->Fill(jet_eta);
           }
         }
       }
       njets_hist_done = true;
 
     }  // end N-1 histos block
 
   }  // end loop through electrons
 
   // inv mass = sqrt(m_1^2 + m_2^2 + 2*(E_1*E_2 - (px1*px2 + py1*py2 + pz1+pz2)
   // ) )
   double invMass = 0;
 
   nelectrons_before_->Fill(electronCollectionSize);
   if (electronCollectionSize > 1) {
     invMass = sqrt(electron[0][1] + electron[1][1] +
                    2 * (electron[0][2] * electron[1][2] -
                         (electron[0][3] * electron[1][3] +
                          electron[0][4] * electron[1][4] +
                          electron[0][5] * electron[1][5])));
     invmass_before_->Fill(invMass);
     invmassPU_before_->Fill(invMass, npvCount);
   }
 
   nelectrons_after_->Fill(nGoodElectrons);
   if (nGoodElectrons > 1) {
     invMass = sqrt(goodElectron[0][1] + goodElectron[1][1] +
                    2 * (goodElectron[0][2] * goodElectron[1][2] -
                         (goodElectron[0][3] * goodElectron[1][3] +
                          goodElectron[0][4] * goodElectron[1][4] +
                          goodElectron[0][5] * goodElectron[1][5])));
     invmass_after_->Fill(invMass);
     invmassPU_afterZ_->Fill(invMass, npvCount);
     npvs_afterZ_->Fill(npvCount);
   }
 
   // Collect final flags
   if (rec_sel) nrec++;
   if (eid_sel) neid++;
   if (iso_sel) niso++;
   //      if (hlt_sel) nhlt++;
   //      if (met_sel) nmet++;
 
   if (all_sel) {
     nsel++;
     LogTrace("") << ">>>> Event ACCEPTED";
   } else {
     LogTrace("") << ">>>> Event REJECTED";
   }
 
   return;
 }

void EwkElecDQM::bookHistograms	(	DQMStore::IBooker &	ibooker,
		edm::Run const &	,
		edm::EventSetup const &
	)

overridevirtual

Implements DQMEDAnalyzer.

Definition at line 151 of file EwkElecDQM.cc.

References DQMStore::IBooker::book1D(), DQMStore::IBooker::book2D(), detainbarrel_after_, detainbarrel_before_, detainendcap_after_, detainendcap_before_, ecalisobarrel_after_, ecalisobarrel_before_, ecalisoendcap_after_, ecalisoendcap_before_, eJetMin_, eta_after_, eta_before_, hcalisobarrel_after_, hcalisobarrel_before_, hcalisoendcap_after_, hcalisoendcap_before_, invmass_after_, invmass_before_, invmassPU_afterZ_, invmassPU_before_, jet_et_after_, jet_et_before_, jet_eta_after_, jet_eta_before_, jetTag_, edm::InputTag::label(), met_after_, met_before_, metTag_, mt_after_, mt_before_, nelectrons_after_, nelectrons_before_, njets_after_, njets_before_, npvs_afterZ_, npvs_before_, pt_after_, pt_before_, PUBinCount_, PUMax_, DQMStore::IBooker::setCurrentFolder(), sieiebarrel_after_, sieiebarrel_before_, sieieendcap_after_, sieieendcap_before_, trig_after_, trig_before_, trkisobarrel_after_, trkisobarrel_before_, trkisoendcap_after_, and trkisoendcap_before_.

                                          {
 
   ibooker.setCurrentFolder("Physics/EwkElecDQM");
 
   char chtitle[256] = "";
 
   pt_before_ = ibooker.book1D("PT_BEFORECUTS",
       "Electron transverse momentum [GeV]", 100, 0., 100.);
   pt_after_ = ibooker.book1D("PT_LASTCUT",
     "Electron transverse momentum [GeV]", 100, 0., 100.);
 
   eta_before_ = ibooker.book1D("ETA_BEFORECUTS",
     "Electron pseudo-rapidity", 50, -2.5, 2.5);
   eta_after_ = ibooker.book1D("ETA_LASTCUT",
     "Electron pseudo-rapidity", 50, -2.5, 2.5);
 
   sieiebarrel_before_ = ibooker.book1D("SIEIEBARREL_BEFORECUTS",
       "Electron #sigma_{i#etai#eta} (barrel)", 70, 0., 0.07);
   sieiebarrel_after_ = ibooker.book1D("SIEIEBARREL_LASTCUT",
       "Electron #sigma_{i#etai#eta} (barrel)", 70, 0., 0.07);
 
   sieieendcap_before_ = ibooker.book1D("SIEIEENDCAP_BEFORECUTS",
       "Electron #sigma_{i#etai#eta} (endcap)", 70, 0., 0.07);
   sieieendcap_after_ = ibooker.book1D("SIEIEENDCAP_LASTCUT",
       "Electron #sigma_{i#etai#eta} (endcap)", 70, 0., 0.07);
 
   detainbarrel_before_ = ibooker.book1D("DETAINBARREL_BEFORECUTS",
       "Electron #Delta#eta_{in} (barrel)", 40, -0.02, 0.02);
   detainbarrel_after_ = ibooker.book1D("DETAINBARREL_LASTCUT",
       "Electron #Delta#eta_{in} (barrel)", 40, -0.02, 0.02);
 
   detainendcap_before_ = ibooker.book1D("DETAINENDCAP_BEFORECUTS",
       "Electron #Delta#eta_{in} (endcap)", 40, -0.02, 0.02);
   detainendcap_after_ = ibooker.book1D("DETAINENDCAP_LASTCUT",
       "Electron #Delta#eta_{in} (endcap)", 40, -0.02, 0.02);
 
   ecalisobarrel_before_ = ibooker.book1D("ECALISOBARREL_BEFORECUTS",
       "Absolute electron ECAL isolation variable (barrel) [GeV]", 50, 0., 50.);
   ecalisobarrel_after_ = ibooker.book1D("ECALISOBARREL_LASTCUT",
       "Absolute electron ECAL isolation variable (barrel) [GeV]", 50, 0., 50.);
 
   ecalisoendcap_before_ = ibooker.book1D("ECALISOENDCAP_BEFORECUTS",
       "Absolute electron ECAL isolation variable (endcap) [GeV]", 50, 0., 50.);
   ecalisoendcap_after_ = ibooker.book1D("ECALISOENDCAP_LASTCUT",
       "Absolute electron ECAL isolation variable (endcap) [GeV]", 50, 0., 50.);
 
   hcalisobarrel_before_ = ibooker.book1D("HCALISOBARREL_BEFORECUTS",
       "Absolute electron HCAL isolation variable (barrel) [GeV]", 50, 0., 50.);
   hcalisobarrel_after_ = ibooker.book1D("HCALISOBARREL_LASTCUT",
       "Absolute electron HCAL isolation variable (barrel) [GeV]", 50, 0., 50.);
 
   hcalisoendcap_before_ = ibooker.book1D("HCALISOENDCAP_BEFORECUTS",
       "Absolute electron HCAL isolation variable (endcap) [GeV]", 50, 0., 50.);
   hcalisoendcap_after_ = ibooker.book1D("HCALISOENDCAP_LASTCUT",
       "Absolute electron HCAL isolation variable (endcap) [GeV]", 50, 0., 50.);
 
   trkisobarrel_before_ = ibooker.book1D("TRKISOBARREL_BEFORECUTS",
       "Absolute electron track isolation variable (barrel) [GeV]", 50, 0., 50.);
   trkisobarrel_after_ = ibooker.book1D("TRKISOBARREL_LASTCUT",
       "Absolute electron track isolation variable (barrel) [GeV]", 50, 0., 50.);
 
   trkisoendcap_before_ = ibooker.book1D("TRKISOENDCAP_BEFORECUTS",
       "Absolute electron track isolation variable (endcap) [GeV]", 50, 0., 50.);
   trkisoendcap_after_ = ibooker.book1D("TRKISOENDCAP_LASTCUT",
       "Absolute electron track isolation variable (endcap) [GeV]", 50, 0., 50.);
 
   trig_before_ = ibooker.book1D("TRIG_BEFORECUTS", "Trigger response", 2, -0.5,
       1.5);  // elecTrig_ is now a vector of strings!
   trig_after_ = ibooker.book1D("TRIG_LASTCUT", "Trigger response", 2, -0.5, 1.5);
 
   invmass_before_ = ibooker.book1D("INVMASS_BEFORECUTS",
       "Di-electron invariant mass [GeV]", 100, 0., 200.);
   invmass_after_ = ibooker.book1D("INVMASS_AFTERCUTS",
       "Di-electron invariant mass [GeV]", 100, 0., 200.);
 
   invmassPU_before_ = ibooker.book2D("INVMASS_PU_BEFORECUTS",
       "Di-electron invariant mass [GeV] vs PU; mass [GeV]; PU count", 100, 0.,
       200., PUBinCount_, -0.5, PUMax_ + 0.5);
   invmassPU_afterZ_ = ibooker.book2D("INVMASS_PU_AFTERZCUTS",
       "Di-electron invariant mass [GeV] vs PU; mass [GeV]; PU count", 100, 0.,
       200., PUBinCount_, -0.5, PUMax_ + 0.5);
 
   npvs_before_ = ibooker.book1D("NPVs_BEFORECUTS",
       "Number of Valid Primary Vertices; nGoodPVs", PUMax_ + 1, -0.5, PUMax_ + 0.5);
 
   npvs_afterZ_ = ibooker.book1D("NPVs_AFTERZCUTS",
       "Number of Valid Primary Vertices; nGoodPVs", PUMax_ + 1, -0.5, PUMax_ + 0.5);
 
   nelectrons_before_ = ibooker.book1D("NELECTRONS_BEFORECUTS",
       "Number of electrons in event", 10, -0.5, 9.5);
   nelectrons_after_ = ibooker.book1D("NELECTRONS_AFTERCUTS",
       "Number of electrons in event", 10, -0.5, 9.5);
 
   snprintf(chtitle, 255, "Transverse mass (%s) [GeV]", metTag_.label().data());
   mt_before_ = ibooker.book1D("MT_BEFORECUTS", chtitle, 150, 0., 300.);
   mt_after_ = ibooker.book1D("MT_LASTCUT", chtitle, 150, 0., 300.);
 
 
   snprintf(chtitle, 255, "Missing transverse energy (%s) [GeV]",
       metTag_.label().data());
   met_before_ = ibooker.book1D("MET_BEFORECUTS", chtitle, 100, 0., 200.);
   met_after_ = ibooker.book1D("MET_LASTCUT", chtitle, 100, 0., 200.);
 
   snprintf(chtitle, 255, "Number of jets (%s) above %.2f GeV",
       jetTag_.label().data(), eJetMin_);
   njets_before_ = ibooker.book1D("NJETS_BEFORECUTS", chtitle, 10, -0.5, 9.5);
   njets_after_ = ibooker.book1D("NJETS_LASTCUT", chtitle, 10, -0.5, 9.5);
 
   snprintf(chtitle, 255, "Jet with highest E_{T} (%s)", jetTag_.label().data());
   jet_et_before_ = ibooker.book1D("JETET1_BEFORECUTS", chtitle, 20, 0., 200.0);
   jet_et_after_ = ibooker.book1D("JETET1_AFTERCUTS", chtitle, 20, 0., 200.0);
 
   snprintf(chtitle, 255, "Eta of Jet with highest E_{T} (%s)",
       jetTag_.label().data());
   jet_eta_before_ = ibooker.book1D("JETETA1_BEFORECUTS", chtitle, 20, -5, 5);
   jet_eta_after_ = ibooker.book1D("JETETA1_AFTERCUTS", chtitle, 20, -5, 5);
 
 }

double EwkElecDQM::calcDeltaPhi	(	double	phi1,
		double	phi2
	)

Definition at line 1023 of file EwkElecDQM.cc.

References SiPixelRawToDigiRegional_cfi::deltaPhi.

Referenced by analyze().

                                                         {
 
   double deltaPhi = phi1 - phi2;
 
   if (deltaPhi < 0) deltaPhi = -deltaPhi;
 
   if (deltaPhi > 3.1415926) {
     deltaPhi = 2 * 3.1415926 - deltaPhi;
   }
 
   return deltaPhi;
 }

void EwkElecDQM::dqmBeginRun	(	const edm::Run &	iRun,
		const edm::EventSetup &	iSet
	)

virtual

Reimplemented from DQMEDAnalyzer.

Definition at line 131 of file EwkElecDQM.cc.

References hltPrescaleProvider_, HLTPrescaleProvider::init(), isValidHltConfig_, LogTrace, nall, neid, niso, nrec, and nsel.

                                                                     {
   nall = 0;
   nsel = 0;
 
   nrec = 0;
   neid = 0;
   niso = 0;
   //       nhlt = 0;
   //       nmet = 0;
 
   // passed as parameter to HLTConfigProvider::init(), not yet used
   bool isConfigChanged = false;
   // isValidHltConfig_ could be used to short-circuit analyze() in case of
   // problems
   isValidHltConfig_ =
       hltPrescaleProvider_.init(iRun, iSet, "HLT", isConfigChanged);
 
   LogTrace("") << "isValidHltConfig_=" << isValidHltConfig_ << "\n";
 }

void EwkElecDQM::endRun	(	const edm::Run &	r,
		const edm::EventSetup &
	)

virtual

Reimplemented from edm::stream::EDAnalyzerBase.

Definition at line 271 of file EwkElecDQM.cc.

References Vispa.Plugins.EdmBrowser.EdmDataAccessor::all(), nall, neid, niso, nrec, nsel, pileupDistInMC::num, and mathSSE::sqrt().

                                                        {
 
   // overall
   double all = nall;
   double esel = nsel / all;
   LogVerbatim("") << "\n>>>>>> SELECTION SUMMARY BEGIN >>>>>>>>>>>>>>>";
   LogVerbatim("") << "Total number of events analyzed: " << nall << " [events]";
   LogVerbatim("") << "Total number of events selected: " << nsel << " [events]";
   LogVerbatim("") << "Overall efficiency:             "
                   << "(" << setprecision(4) << esel * 100. << " +/- "
                   << setprecision(2) << sqrt(esel * (1 - esel) / all) * 100.
                   << ")%";
 
   double erec = nrec / all;
   double eeid = neid / all;
   double eiso = niso / all;
   //   double ehlt = nhlt/all;
   //   double emet = nmet/all;
 
   // general reconstruction step??
   double num = nrec;
   double eff = erec;
   double err = sqrt(eff * (1 - eff) / all);
   LogVerbatim("") << "Passing Pt/Eta/Quality cuts:    " << num << " [events], ("
                   << setprecision(4) << eff * 100. << " +/- " << setprecision(2)
                   << err * 100. << ")%";
 
   // electron ID step
   num = neid;
   eff = eeid;
   err = sqrt(eff * (1 - eff) / all);
   double effstep = 0.;
   double errstep = 0.;
   if (nrec > 0) effstep = eeid / erec;
   if (nrec > 0) errstep = sqrt(effstep * (1 - effstep) / nrec);
   LogVerbatim("") << "Passing eID cuts:         " << num << " [events], ("
                   << setprecision(4) << eff * 100. << " +/- " << setprecision(2)
                   << err * 100. << ")%, to previous step: (" << setprecision(4)
                   << effstep * 100. << " +/- " << setprecision(2)
                   << errstep * 100. << ")%";
 
   // isolation step
   num = niso;
   eff = eiso;
   err = sqrt(eff * (1 - eff) / all);
   effstep = 0.;
   errstep = 0.;
   if (neid > 0) effstep = eiso / eeid;
   if (neid > 0) errstep = sqrt(effstep * (1 - effstep) / neid);
   LogVerbatim("") << "Passing isolation cuts:         " << num << " [events], ("
                   << setprecision(4) << eff * 100. << " +/- " << setprecision(2)
                   << err * 100. << ")%, to previous step: (" << setprecision(4)
                   << effstep * 100. << " +/- " << setprecision(2)
                   << errstep * 100. << ")%";
 
   //   // trigger step
   //   num = nhlt;
   //   eff = ehlt;
   //   err = sqrt(eff*(1-eff)/all);
   //   effstep = 0.;
   //   errstep = 0.;
   //   if (niso>0) effstep = ehlt/eiso;
   //   if (niso>0) errstep = sqrt(effstep*(1-effstep)/niso);
   //   LogVerbatim("") << "Passing HLT criteria:           " << num << "
   // [events], (" << setprecision(4) << eff*100. <<" +/- "<< setprecision(2) <<
   // err*100. << ")%, to previous step: (" <<  setprecision(4) << effstep*100.
   // << " +/- "<< setprecision(2) << errstep*100. <<")%";
 
   // trigger step
   num = nsel;
   eff = esel;
   err = sqrt(eff * (1 - eff) / all);
   effstep = 0.;
   errstep = 0.;
   if (niso > 0) effstep = esel / eiso;
   if (niso > 0) errstep = sqrt(effstep * (1 - effstep) / niso);
   LogVerbatim("") << "Passing HLT criteria:           " << num << " [events], ("
                   << setprecision(4) << eff * 100. << " +/- " << setprecision(2)
                   << err * 100. << ")%, to previous step: (" << setprecision(4)
                   << effstep * 100. << " +/- " << setprecision(2)
                   << errstep * 100. << ")%";
 
   //   // met/acoplanarity cuts
   //   num = nmet;
   //   eff = emet;
   //   err = sqrt(eff*(1-eff)/all);
   //   effstep = 0.;
   //   errstep = 0.;
   //   if (nhlt>0) effstep = emet/ehlt;
   //   if (nhlt>0) errstep = sqrt(effstep*(1-effstep)/nhlt);
   //   LogVerbatim("") << "Passing MET/acoplanarity cuts:  " << num << "
   // [events], (" << setprecision(4) << eff*100. <<" +/- "<< setprecision(2) <<
   // err*100. << ")%, to previous step: (" <<  setprecision(4) << effstep*100.
   // << " +/- "<< setprecision(2) << errstep*100. <<")%";
 
   //   // Z/top selection cuts ALSO LAST STEP so "sel" for "selection"
   //   num = nsel;
   //   eff = esel;
   //   err = sqrt(eff*(1-eff)/all);
   //   effstep = 0.;
   //   errstep = 0.;
   //   if (nmet>0) effstep = esel/emet;
   //   if (nmet>0) errstep = sqrt(effstep*(1-effstep)/nmet);
   //   LogVerbatim("") << "Passing Z/top rejection cuts:   " << num << "
   // [events], (" << setprecision(4) << eff*100. <<" +/- "<< setprecision(2) <<
   // err*100. << ")%, to previous step: (" <<  setprecision(4) << effstep*100.
   // << " +/- "<< setprecision(2) << errstep*100. <<")%";
 
   LogVerbatim("") << ">>>>>> SELECTION SUMMARY END   >>>>>>>>>>>>>>>\n";
 }