RPCOccupancyTest.cc

Go to the documentation of this file.

/*  \author Anna Cimmino*/
//#include <cmath>
#include <sstream>
#include <DQM/RPCMonitorClient/interface/RPCOccupancyTest.h>
#include "DQM/RPCMonitorDigi/interface/utils.h"

// Framework
#include "FWCore/MessageLogger/interface/MessageLogger.h"
//Geometry
#include "Geometry/RPCGeometry/interface/RPCGeomServ.h"

RPCOccupancyTest::RPCOccupancyTest(const edm::ParameterSet& ps ){
  edm::LogVerbatim ("rpceventsummary") << "[RPCOccupancyTest]: Constructor";
  
  prescaleFactor_ = ps.getUntrackedParameter<int>("DiagnosticPrescale", 1);
  numberOfDisks_ = ps.getUntrackedParameter<int>("NumberOfEndcapDisks", 4);
  numberOfRings_ = ps.getUntrackedParameter<int>("NumberOfEndcapRings", 2);
  useNormalization_ = ps.getUntrackedParameter<bool>("testMode", true);
  useRollInfo_ = ps.getUntrackedParameter<bool>("useRollInfo_", false);

  std::string subsystemFolder = ps.getUntrackedParameter<std::string>("RPCFolder", "RPC");
  std::string recHitTypeFolder= ps.getUntrackedParameter<std::string>("RecHitTypeFolder", "AllHits");

  prefixDir_ =   subsystemFolder+ "/"+ recHitTypeFolder;
 
}

RPCOccupancyTest::~RPCOccupancyTest(){}

void RPCOccupancyTest::beginJob(std::string & workingFolder){
 edm::LogVerbatim ("rpceventsummary") << "[RPCOccupancyTest]: Begin job ";
 globalFolder_ =  workingFolder;

 totalStrips_ = 0.;
 totalActive_ = 0.;   
}

 
void RPCOccupancyTest::getMonitorElements(std::vector<MonitorElement *> & meVector, std::vector<RPCDetId> & detIdVector, std::string & clientHistoName){
  //Get NumberOfDigi ME for each roll
  for(unsigned int i = 0 ; i<meVector.size(); i++){
    
    std::string meName =  meVector[i]->getName();

    if(meName.find(clientHistoName) != std::string::npos){
      myOccupancyMe_.push_back(meVector[i]);
      myDetIds_.push_back(detIdVector[i]);
    }
  }
}

void RPCOccupancyTest::clientOperation() {

  edm::LogVerbatim ("rpceventsummary") <<"[RPCOccupancyTest]: Client Operation";

 //Loop on MEs
  for (unsigned int  i = 0 ; i<myOccupancyMe_.size();i++){
    this->fillGlobalME(myDetIds_[i],myOccupancyMe_[i]);
  }//End loop on MEs

  //Active Channels
  if(Active_Fraction && totalStrips_!=0.){    
    Active_Fraction->setBinContent(1, (totalActive_/totalStrips_));
  }
  if(Active_Dead){    
    Active_Dead->setBinContent( 1, totalActive_ );
    Active_Dead->setBinContent( 2, (totalStrips_ - totalActive_ ));
  }

}


void RPCOccupancyTest::myBooker(DQMStore::IBooker & ibooker){

  ibooker.setCurrentFolder( globalFolder_);
  
  std::stringstream histoName;
  rpcdqm::utils rpcUtils;
  
  histoName.str("");
  histoName<<"RPC_Active_Channel_Fractions";
  Active_Fraction = ibooker.book1D(histoName.str().c_str(), histoName.str().c_str(),  1, 0.5, 1.5);
  Active_Fraction -> setBinLabel(1, "Active Fraction", 1);

  histoName.str("");
  histoName<<"RPC_Active_Inactive_Strips";
  Active_Dead = ibooker.book1D(histoName.str().c_str(), histoName.str().c_str(),  2, 0.5, 2.5);
  Active_Dead -> setBinLabel(1, "Active Strips", 1);
  Active_Dead -> setBinLabel(2, "Inactive Strips", 1);

  histoName.str("");
  histoName<<"Barrel_OccupancyByStations_Normalized";
  Barrel_OccBySt = ibooker.book1D(histoName.str().c_str(), histoName.str().c_str(),  4, 0.5, 4.5);
  Barrel_OccBySt -> setBinLabel(1, "St1", 1);
  Barrel_OccBySt -> setBinLabel(2, "St2", 1);
  Barrel_OccBySt -> setBinLabel(3, "St3", 1);
  Barrel_OccBySt -> setBinLabel(4, "St4", 1);
  
  
  histoName.str("");
  histoName<<"EndCap_OccupancyByRings_Normalized";
  EndCap_OccByRng = ibooker.book1D(histoName.str().c_str(), histoName.str().c_str(),  4, 0.5, 4.5);
  EndCap_OccByRng -> setBinLabel(1, "E+/R3", 1);
  EndCap_OccByRng -> setBinLabel(2, "E+/R2", 1);
  EndCap_OccByRng -> setBinLabel(3, "E-/R2", 1);
  EndCap_OccByRng -> setBinLabel(4, "E-/R3", 1);
  
 for (int w = -2; w<=2; w++ ){//loop on wheels
 
    histoName.str("");
    histoName<<"AsymmetryLeftRight_Roll_vs_Sector_Wheel"<<w;
    
    AsyMeWheel[w+2] = ibooker.book2D(histoName.str().c_str(), histoName.str().c_str(),  12, 0.5, 12.5, 21, 0.5, 21.5);
    
    rpcUtils.labelXAxisSector(AsyMeWheel[w+2]);
    rpcUtils.labelYAxisRoll(AsyMeWheel[w+2], 0, w,  useRollInfo_);
  
    
    if(useNormalization_){
  
      histoName.str("");
      histoName<<"OccupancyNormByEvents_Wheel"<<w;
      NormOccupWheel[w+2] = ibooker.book2D(histoName.str().c_str(), histoName.str().c_str(),  12, 0.5, 12.5, 21, 0.5, 21.5);
      
      rpcUtils.labelXAxisSector(  NormOccupWheel[w+2]);
      rpcUtils.labelYAxisRoll(  NormOccupWheel[w+2], 0, w,  useRollInfo_);
            
      histoName.str("");
      histoName<<"OccupancyNormByEvents_Distribution_Wheel"<<w;   
    
      NormOccupDWheel[w+2] = ibooker.book1D(histoName.str().c_str(), histoName.str().c_str(),  100, 0.0, 0.205);
    }
  }//end Barrel
  
  for(int d = -numberOfDisks_; d<=numberOfDisks_; d++ ){

    if (d == 0)continue;
    
    int offset = numberOfDisks_;
    if (d>0) offset --; //used to skip case equale to zero
    
    histoName.str("");
    histoName<<"AsymmetryLeftRight_Ring_vs_Segment_Disk"<<d;
    AsyMeDisk[d+offset] = ibooker.book2D(histoName.str().c_str(), histoName.str().c_str(), 36, 0.5, 36.5, 3*numberOfRings_, 0.5,3*numberOfRings_+ 0.5);
    
    rpcUtils.labelXAxisSegment(AsyMeDisk[d+offset]);
    rpcUtils.labelYAxisRing(AsyMeDisk[d+offset], numberOfRings_,  useRollInfo_);
    
   
    
    if(useNormalization_){
   
      histoName.str("");
      histoName<<"OccupancyNormByEvents_Disk"<<d;
      NormOccupDisk[d+offset] = ibooker.book2D(histoName.str().c_str(), histoName.str().c_str(), 36, 0.5, 36.5, 3*numberOfRings_, 0.5,3*numberOfRings_+ 0.5);
      
      rpcUtils.labelXAxisSegment(NormOccupDisk[d+offset]);
      rpcUtils.labelYAxisRing( NormOccupDisk[d+offset],numberOfRings_,  useRollInfo_);
      
      histoName.str("");
      histoName<<"OccupancyNormByEvents_Distribution_Disk"<<d;  
      NormOccupDDisk[d+offset] = ibooker.book1D(histoName.str().c_str(), histoName.str().c_str(),  100, 0.0, 0.205);
    }
  }//End loop on Endcap
}


void RPCOccupancyTest::fillGlobalME(RPCDetId & detId, MonitorElement * myMe){
  

if (!myMe) return;
    
    MonitorElement * AsyMe=NULL;      //Left Right Asymetry 
    MonitorElement * NormOccup=NULL;
    MonitorElement * NormOccupD=NULL;
       
    if(detId.region() ==0){
      AsyMe= AsyMeWheel[detId.ring()+2];
      if(useNormalization_){
    NormOccup=NormOccupWheel[detId.ring()+2];
    NormOccupD=NormOccupDWheel[detId.ring()+2];
      }

    }else{

      if( -detId.station() +  numberOfDisks_ >= 0 ){
    
    if(detId.region()<0){
      AsyMe= AsyMeDisk[-detId.station()  + numberOfDisks_];
      if(useNormalization_){
        NormOccup=NormOccupDisk[-detId.station() + numberOfDisks_];
        NormOccupD=NormOccupDDisk[-detId.station() + numberOfDisks_];
      }
    }else{
      AsyMe= AsyMeDisk[detId.station() + numberOfDisks_-1];
      if(useNormalization_){
        NormOccup=NormOccupDisk[detId.station() + numberOfDisks_-1];
        NormOccupD=NormOccupDDisk[detId.station() + numberOfDisks_-1];
      }
    }
      }
    }

 
    int xBin,yBin;
    if(detId.region()==0){//Barrel
      xBin= detId.sector();
      rpcdqm::utils rollNumber;
      yBin = rollNumber.detId2RollNr(detId);
    }else{//Endcap
      //get segment number
      RPCGeomServ RPCServ(detId);
      xBin = RPCServ.segment();
      (numberOfRings_ == 3 ? yBin= detId.ring()*3-detId.roll()+1 : yBin= (detId.ring()-1)*3-detId.roll()+1);
    }
    
    
    int stripInRoll=myMe->getNbinsX();
    totalStrips_ += (float)stripInRoll;
    float FOccupancy=0;
    float BOccupancy=0;
    
    float  totEnt =  myMe->getEntries();
    for(int strip = 1 ; strip<=stripInRoll; strip++){
      float stripEntries = myMe->getBinContent(strip);
      if(stripEntries > 0) {totalActive_++;}
      if(strip<=stripInRoll/2) {FOccupancy+=myMe->getBinContent(strip);}
      else  {BOccupancy+=myMe->getBinContent(strip);}
    }
        

    float asym = 0;
    if(totEnt != 0 ) asym =  fabs((FOccupancy - BOccupancy )/totEnt);
    
    if(AsyMe)  AsyMe->setBinContent(xBin,yBin,asym);


    
    float normoccup = 1;
    if(rpcevents_ != 0){ normoccup = (totEnt/rpcevents_);}
   
    if(useNormalization_){
      if(NormOccup)  NormOccup->setBinContent(xBin,yBin, normoccup);
      if(NormOccupD) NormOccupD->Fill(normoccup);
    }    
   

    if(detId.region()==0) {
      if(Barrel_OccBySt)Barrel_OccBySt -> Fill(detId.station(), normoccup);
    }else if(detId.region()==1) {
      if(detId.ring()==3) {
    EndCap_OccByRng -> Fill(1, normoccup);
      } else {
    EndCap_OccByRng -> Fill(2, normoccup);
      }
    } else {
      if(detId.ring()==3) {
    EndCap_OccByRng -> Fill(4, normoccup);
      }else {
    EndCap_OccByRng -> Fill(3, normoccup);
      }
    }

}