HLTOfflineDQMTopSingleLepton::MonitorSingleLepton Class Reference

#include <TopSingleLeptonHLTOfflineDQM.h>

Public Member Functions
void	book (DQMStore::IBooker &store_)
	book histograms in subdirectory directory More...
void	fill (const edm::Event &event, const edm::EventSetup &setup, const HLTConfigProvider &hltConfig, const std::vector< std::string > triggerPaths)
	fill monitor histograms with electronId and jetCorrections More...
	MonitorSingleLepton (const char *label, const edm::ParameterSet &cfg, edm::ConsumesCollector &&iC)
	default contructor More...
	~MonitorSingleLepton ()
	default destructor More...

Private Member Functions
bool	booked (const std::string histName) const
	check if histogram was booked More...
void	fill (const edm::Event &event, const edm::TriggerResults &triggerTable, std::string channel, const std::vector< std::string > &labels) const
	fill trigger monitoring histograms More...
void	fill (const std::string histName, double value) const
	fill histogram if it had been booked before More...
void	fill (const std::string histName, double xValue, double yValue) const
	fill histogram if it had been booked before (2-dim version) More...
void	fill (const std::string histName, double xValue, double yValue, double zValue) const
	fill histogram if it had been booked before (2-dim version) More...
std::string	monitorPath (const std::string &label) const
std::string	selectionPath (const std::string &label) const
void	triggerBinLabels (std::string channel, const std::vector< std::string > &labels)
	set configurable labels for trigger monitoring histograms More...

Private Attributes
edm::EDGetTokenT < reco::JetTagCollection >	btagEff_
	btag discriminator labels More...
double	btagEffWP_
	btag working points More...
edm::EDGetTokenT < reco::JetTagCollection >	btagPur_
double	btagPurWP_
edm::EDGetTokenT < reco::JetTagCollection >	btagVtx_
double	btagVtxWP_
int	eidPattern_
StringCutObjectSelector < reco::GsfElectron > *	elecIso_
	extra isolation criterion on electron More...
edm::EDGetTokenT< edm::View < reco::GsfElectron > >	elecs_
	input sources for monitoring More...
StringCutObjectSelector < reco::GsfElectron > *	elecSelect_
	extra selection on electrons More...
edm::EDGetTokenT < edm::ValueMap< float > >	electronId_
	electronId label More...
trigger::Vids	electronIds_
trigger::VRelectron	electronRefs_
std::string	folder_
std::map< std::string, MonitorElement * >	hists_
	histogram container More...
bool	includeBTag_
std::string	jetCorrector_
	jetCorrector More...
edm::EDGetTokenT < reco::JetIDValueMap >	jetIDLabel_
	jetID as an extra selection type More...
StringCutObjectSelector < reco::JetID > *	jetIDSelect_
	extra jetID selection on calo jets More...
edm::EDGetTokenT< edm::View < reco::Jet > >	jets_
std::string	jetSelect_
std::string	label_
	instance label More...
int	logged_
	number of logged interesting events More...
double	lowerEdge_
	mass window upper and lower edge More...
std::vector< edm::EDGetTokenT < edm::View< reco::MET > > >	mets_
	considers a vector of METs More...
trigger::Vids	muonIds_
StringCutObjectSelector < reco::Muon > *	muonIso_
	extra isolation criterion on muon More...
trigger::VRmuon	muonRefs_
edm::EDGetTokenT< edm::View < reco::Muon > >	muons_
StringCutObjectSelector < reco::Muon > *	muonSelect_
	extra selection on muons More...
trigger::Vids	pfjetIds_
trigger::VRpfjet	pfjetRefs_
std::string	processName_
	hlt objects More...
edm::EDGetTokenT< edm::View < reco::Vertex > >	pvs_
StringCutObjectSelector < reco::Vertex > *	pvSelect_
	extra selection on primary vertices; meant to investigate the pile-up effect More...
edm::EDGetTokenT < trigger::TriggerEventWithRefs >	triggerEventWithRefsTag_
std::vector< std::string >	triggerPaths_
edm::EDGetTokenT < edm::TriggerResults >	triggerTable_
	trigger table More...
double	upperEdge_

Detailed Description

Definition at line 46 of file TopSingleLeptonHLTOfflineDQM.h.

Constructor & Destructor Documentation

MonitorSingleLepton::MonitorSingleLepton	(	const char *	label,
		const edm::ParameterSet &	cfg,
		edm::ConsumesCollector &&	iC
	)

default contructor

Definition at line 37 of file TopSingleLeptonHLTOfflineDQM.cc.

References btagEff_, btagEffWP_, btagPur_, btagPurWP_, btagVtx_, btagVtxWP_, eidPattern_, elecIso_, elecs_, elecSelect_, electronId_, edm::ParameterSet::existsAs(), folder_, edm::ParameterSet::getParameter(), includeBTag_, HLT_FULL_cff::InputTag, jetCorrector_, jetIDLabel_, jetIDSelect_, jets_, jetSelect_, lowerEdge_, objects.METAnalyzer::met, mets_, muonIso_, muons_, muonSelect_, LaserDQM_cfg::process, processName_, pvs_, pvSelect_, AlCaHLTBitMon_QueryRunRegistry::string, triggerEventWithRefsTag_, triggerPaths_, triggerTable_, and upperEdge_.

                                                                                                                   : 
    label_(label), elecIso_(0), elecSelect_(0), pvSelect_(0), muonIso_(0), muonSelect_(0), jetIDSelect_(0), includeBTag_(false), lowerEdge_(-1.), upperEdge_(-1.), logged_(0)
  {
    // sources have to be given; this PSet is not optional
    edm::ParameterSet sources=cfg.getParameter<edm::ParameterSet>("sources");
    muons_= iC.consumes< edm::View<reco::Muon> >(sources.getParameter<edm::InputTag>("muons"));
    elecs_= iC.consumes< edm::View<reco::GsfElectron> >(sources.getParameter<edm::InputTag>("elecs"));
    jets_ = iC.consumes< edm::View<reco::Jet> >(sources.getParameter<edm::InputTag>("jets" ));

    const auto& mets = sources.getParameter<std::vector<edm::InputTag>>("mets");
    for (const auto& met: mets) {
      mets_.push_back(iC.consumes<edm::View<reco::MET>>(met));
    }

    pvs_ = iC.consumes< edm::View<reco::Vertex> >(sources.getParameter<edm::InputTag>("pvs" ));

    // electronExtras are optional; they may be omitted or 
    // empty
    if( cfg.existsAs<edm::ParameterSet>("elecExtras") ){
      edm::ParameterSet elecExtras=cfg.getParameter<edm::ParameterSet>("elecExtras");
      // select is optional; in case it's not found no
      // selection will be applied
      if( elecExtras.existsAs<std::string>("select") ){
        elecSelect_= new StringCutObjectSelector<reco::GsfElectron>(elecExtras.getParameter<std::string>("select"));
      }
      // isolation is optional; in case it's not found no
      // isolation will be applied
      if( elecExtras.existsAs<std::string>("isolation") ){
        elecIso_= new StringCutObjectSelector<reco::GsfElectron>(elecExtras.getParameter<std::string>("isolation"));
      }
      // electronId is optional; in case it's not found the 
      // InputTag will remain empty
      if( elecExtras.existsAs<edm::ParameterSet>("electronId") ){
        edm::ParameterSet elecId=elecExtras.getParameter<edm::ParameterSet>("electronId");
        electronId_= iC.consumes< edm::ValueMap<float> >(elecId.getParameter<edm::InputTag>("src"));
        eidPattern_= elecId.getParameter<int>("pattern");
      }
    }
    // pvExtras are optional; they may be omitted or empty
    if(cfg.existsAs<edm::ParameterSet>("pvExtras")){
      edm::ParameterSet pvExtras=cfg.getParameter<edm::ParameterSet>("pvExtras");
      // select is optional; in case it's not found no
      // selection will be applied
      if( pvExtras.existsAs<std::string>("select") ){
        pvSelect_= new StringCutObjectSelector<reco::Vertex>(pvExtras.getParameter<std::string>("select"));
      }
    }
    // muonExtras are optional; they may be omitted or empty
    if( cfg.existsAs<edm::ParameterSet>("muonExtras") ){
      edm::ParameterSet muonExtras=cfg.getParameter<edm::ParameterSet>("muonExtras");
      // select is optional; in case it's not found no
      // selection will be applied
      if( muonExtras.existsAs<std::string>("select") ){
        muonSelect_= new StringCutObjectSelector<reco::Muon>(muonExtras.getParameter<std::string>("select"));
      }
      // isolation is optional; in case it's not found no
      // isolation will be applied
      if( muonExtras.existsAs<std::string>("isolation") ){
        muonIso_= new StringCutObjectSelector<reco::Muon>(muonExtras.getParameter<std::string>("isolation"));
      }
    }

    // jetExtras are optional; they may be omitted or 
    // empty
    if( cfg.existsAs<edm::ParameterSet>("jetExtras") ){
      edm::ParameterSet jetExtras=cfg.getParameter<edm::ParameterSet>("jetExtras");
      // jetCorrector is optional; in case it's not found 
      // the InputTag will remain empty
      if( jetExtras.existsAs<std::string>("jetCorrector") ){
        jetCorrector_= jetExtras.getParameter<std::string>("jetCorrector");
      }
      // read jetID information if it exists
      if(jetExtras.existsAs<edm::ParameterSet>("jetID")){
        edm::ParameterSet jetID=jetExtras.getParameter<edm::ParameterSet>("jetID");
        jetIDLabel_ = iC.consumes< reco::JetIDValueMap >(jetID.getParameter<edm::InputTag>("label"));
        jetIDSelect_= new StringCutObjectSelector<reco::JetID>(jetID.getParameter<std::string>("select"));
      }
      // select is optional; in case it's not found no
      // selection will be applied (only implemented for 
      // CaloJets at the moment)
      if( jetExtras.existsAs<std::string>("select") ){
        jetSelect_= jetExtras.getParameter<std::string>("select");
      }
      // jetBDiscriminators are optional; in case they are
      // not found the InputTag will remain empty; they 
      // consist of pairs of edm::JetFlavorAssociation's & 
      // corresponding working points
      includeBTag_=jetExtras.existsAs<edm::ParameterSet>("jetBTaggers");
      if( includeBTag_ ){
        edm::ParameterSet btagEff=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("trackCountingEff");
        btagEff_= iC.consumes< reco::JetTagCollection >(btagEff.getParameter<edm::InputTag>("label")); btagEffWP_= btagEff.getParameter<double>("workingPoint");
        edm::ParameterSet btagPur=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("trackCountingPur");
        btagPur_= iC.consumes< reco::JetTagCollection >(btagPur.getParameter<edm::InputTag>("label")); btagPurWP_= btagPur.getParameter<double>("workingPoint");
        edm::ParameterSet btagVtx=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("secondaryVertex" );
        btagVtx_= iC.consumes< reco::JetTagCollection >(btagVtx.getParameter<edm::InputTag>("label")); btagVtxWP_= btagVtx.getParameter<double>("workingPoint");
      }
    }

    // triggerExtras are optional; they may be omitted or empty
    processName_ = "HLT";
    if( cfg.existsAs<edm::ParameterSet>("triggerExtras") ){
      edm::ParameterSet triggerExtras=cfg.getParameter<edm::ParameterSet>("triggerExtras");
      triggerTable_= iC.consumes< edm::TriggerResults >(triggerExtras.getParameter<edm::InputTag>("src"));
      processName_ = triggerExtras.getParameter<edm::InputTag>("src").process();
      triggerPaths_=triggerExtras.getParameter<std::vector<std::string> >("paths");
    }

    // massExtras is optional; in case it's not found no mass
    // window cuts are applied for the same flavor monitor
    // histograms
    if( cfg.existsAs<edm::ParameterSet>("massExtras") ){
      edm::ParameterSet massExtras=cfg.getParameter<edm::ParameterSet>("massExtras");
      lowerEdge_= massExtras.getParameter<double>("lowerEdge");
      upperEdge_= massExtras.getParameter<double>("upperEdge");
    }

    // and don't forget to do the histogram booking
    folder_=cfg.getParameter<std::string>("directory");

    triggerEventWithRefsTag_ = iC.consumes< trigger::TriggerEventWithRefs >(edm::InputTag("hltTriggerSummaryRAW","",processName_));

  }

HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::~MonitorSingleLepton ( )

inline

default destructor

Definition at line 53 of file TopSingleLeptonHLTOfflineDQM.h.

{};

Member Function Documentation

void MonitorSingleLepton::book

(

DQMStore::IBooker &

store_

)

book histograms in subdirectory directory

Definition at line 161 of file TopSingleLeptonHLTOfflineDQM.cc.

References DQMStore::IBooker::book1D(), DQMStore::IBooker::book2D(), folder_, hists_, label_, DQMStore::IBooker::setCurrentFolder(), AlCaHLTBitMon_QueryRunRegistry::string, triggerBinLabels(), and triggerPaths_.

    {
      //set up the current directory path
      std::string current(folder_); current+=label_;
      store_.setCurrentFolder(current);

      // determine number of bins for trigger monitoring
      unsigned int nPaths=triggerPaths_.size();

      // number of selected primary vertices
      hists_["pvMult_"     ] = store_.book1D("PvMult"     , "N_{pvs}"          ,     100,     0.,    100.);  
      // multiplicity of jets with pt>20 (corrected to L2+L3)
      hists_["jetMult_"    ] = store_.book1D("JetMult"    , "N_{20}(jet)"      ,     10,     0.,     10.);   
      // // trigger efficiency estimates for single lepton triggers
      // hists_["triggerEff_" ] = store_.book1D("TriggerEff" , "Eff(trigger)"     , nPaths,     0.,  nPaths);
      // monitored trigger occupancy for single lepton triggers
      hists_["triggerMon_" ] = store_.book1D("TriggerMon" , "Mon(trigger)"     , nPaths,     0.,  nPaths);
      // W mass estimate
      hists_["massW_"      ] = store_.book1D("MassW"      , "M(W)"             ,     60,     0.,    300.);   
      // Top mass estimate
      hists_["massTop_"    ] = store_.book1D("MassTop"    , "M(Top)"           ,     50,     0.,    500.);   
      // Mlb mu 
      hists_["mMub_"       ] = store_.book1D("mMub"       , "m_{#mub}"         ,     50,     0.,    500.);
      // W mass transverse estimate mu
      hists_["MTWm_"       ] = store_.book1D("MTWm"       , "M_{T}^{W}(#mu)"   ,     60,     0.,    300.);
      // Top mass transverse estimate mu
      hists_["mMTT_"       ] = store_.book1D("mMTT"       , "M_{T}^{t}(#mu)"   ,     50,     0.,    500.);
      // Mlb e 
      hists_["mEb_"        ] = store_.book1D("mEb"        , "m_{eb}"           ,     50,     0.,    500.);
      // W mass transverse estimate e
      hists_["MTWe_"       ] = store_.book1D("MTWe"       , "M_{T}^{W}(e)"     ,     60,     0.,    300.);
      // Top mass transverse estimate e
      hists_["eMTT_"       ] = store_.book1D("eMTT"       , "M_{T}^{t}(e)"     ,     50,     0.,    500.);
      // set bin labels for trigger monitoring
      triggerBinLabels(std::string("trigger"), triggerPaths_);
      // multiplicity of btagged jets (for track counting high efficiency) with pt(L2L3)>20
      hists_["jetMultBEff_"] = store_.book1D("JetMultBProb", "N_{20}(b/prob)"    ,     10,     0.,     10.);   
      // btag discriminator for track counting high efficiency for jets with pt(L2L3)>20
      hists_["jetBDiscEff_"] = store_.book1D("JetBDiscProb", "Disc_{b/prob}(jet)",     25,     0.,     2.5);   
      // multiplicity of btagged jets (for track counting high purity) with pt(L2L3)>20
      hists_["jetMultBPur_"] = store_.book1D("JetMultBPur", "N_{20}(b/pur)"    ,     10,     0.,     10.);   
      // btag discriminator for track counting high purity
      hists_["jetBDiscPur_"] = store_.book1D("JetBDiscPur", "Disc_{b/pur}(Jet)",     100,     0.,     10.);   
      // multiplicity of btagged jets (for simple secondary vertex) with pt(L2L3)>20
      hists_["jetMultBVtx_"] = store_.book1D("JetMultBVtx", "N_{20}(b/vtx)"    ,     10,     0.,     10.);   
      // btag discriminator for simple secondary vertex
      hists_["jetBDiscVtx_"] = store_.book1D("JetBDiscVtx", "Disc_{b/vtx}(Jet)",     35,    -1.,      6.);   
      // selected events
      hists_["eventLogger_"] = store_.book2D("EventLogger", "Logged Events"    ,      3,     0.,      3.,   4,   0.,   4.);
      // set axes titles for selected events
      hists_["eventLogger_"]->getTH1()->SetOption("TEXT");
      hists_["eventLogger_"]->setBinLabel( 1 , "Run"             , 1);
      hists_["eventLogger_"]->setBinLabel( 2 , "Block"           , 1);
      hists_["eventLogger_"]->setBinLabel( 3 , "Event"           , 1);
      hists_["eventLogger_"]->setAxisTitle("logged evts"         , 2);

      // deltaR min between hlt iso lepton and reco iso lepton wrt eta
      hists_["leptDeltaREta_"] = store_.book2D("DeltaRMinEtaLepton", "#Delta R_{min}(leptons) wrt #eta", 30, -3, 3, 10, 0., 0.1);   
      // deltaR min between hlt jets and reco jets wrt eta
      hists_["jetDeltaREta_"] = store_.book2D("DeltaRMinEtaJet", "#Delta R_{min}(jets) wrt #eta", 30, -3, 3, 10, 0., 0.1);   
      // resolution in pT for matched isolated leptons
      hists_["leptResolution_"] = store_.book1D("ResIsoLeptons", "#Delta p_{T}/p_{T}(matched leptons)", 20, 0., 0.1);   
      // resolution in pT for matched jets
      hists_["jetResolution_"] = store_.book1D("ResIsoJets", "#Delta p_{T}/p_{T}(matched jets)", 20, 0., 0.1);   
      // matching monitoring
      hists_["matchingMon_"] = store_.book1D("MatchingMon", "Mon(matching)", 5, 0., 5.);   
      // set axes titles for matching monitoring
      hists_["matchingMon_"]->setBinLabel( 1 , "iso lepton" );
      hists_["matchingMon_"]->setBinLabel( 2 , "1st jet" );
      hists_["matchingMon_"]->setBinLabel( 3 , "2nd jet" );
      hists_["matchingMon_"]->setBinLabel( 4 , "3rd jet" );
      hists_["matchingMon_"]->setBinLabel( 5 , "all " );

      return;
    }

bool HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::booked ( const std::string  histName ) const

inlineprivate

check if histogram was booked

Definition at line 74 of file TopSingleLeptonHLTOfflineDQM.h.

References hists_.

Referenced by fill().

{ return hists_.find(histName.c_str())!=hists_.end(); };

void MonitorSingleLepton::fill	(	const edm::Event &	event,
		const edm::EventSetup &	setup,
		const HLTConfigProvider &	hltConfig,
		const std::vector< std::string >	triggerPaths
	)

fill monitor histograms with electronId and jetCorrections

Definition at line 238 of file TopSingleLeptonHLTOfflineDQM.cc.

References btagEff_, btagEffWP_, btagPur_, btagPurWP_, btagVtx_, btagVtxWP_, JetCorrector::correction(), mvaPFMET_cff::corrector, deltaR(), HLTOfflineDQMTopSingleLepton::DRMIN, alignCSCRings::e, eidPattern_, elecIso_, elecs_, elecSelect_, electronId_, electronIds_, electronRefs_, eta, edm::EventSetup::find(), edm::Event::getByToken(), JetCorrector::getJetCorrector(), hists_, i, customizeTrackingMonitorSeedNumber::idx, includeBTag_, trackerHitRTTI::isMatched(), edm::EDGetTokenT< T >::isUninitialized(), j, metsig::jet, jetCorrector_, jetIDLabel_, jetIDSelect_, fwrapper::jets, jets_, jetSelect_, relval_2017::k, WDecay::kElec, WDecay::kMuon, logged_, lowerEdge_, CalculateHLT::masslb(), CalculateHLT::massTopQuark(), CalculateHLT::massWBoson(), HLTOfflineDQMTopSingleLepton::MAXJETS, objects.METAnalyzer::met, mets_, HLTConfigProvider::moduleLabels(), HLTConfigProvider::moduleType(), RPCpg::mu, VarParsing::mult, metsig::muon, muonIds_, muonIso_, muonRefs_, patZpeak::muons, muons_, muonSelect_, mergeVDriftHistosByStation::name, pfjetIds_, pfjetRefs_, processName_, EnergyCorrector::pt, MetAnalyzer::pv(), pvs_, pvSelect_, reco::Jet::scaleEnergy(), EgammaValidation_Wenu_cff::sel, findQualityFiles::size, CalculateHLT::tmassTopQuark(), CalculateHLT::tmassWBoson(), triggerEventWithRefsTag_, edm::TriggerNames::triggerIndex(), edm::TriggerNames::triggerNames(), triggerPaths_, triggerTable_, upperEdge_, and HLTOfflineDQMTopSingleLepton::WMASS.

Referenced by fill().

    {
      // fetch trigger event if configured such 
      edm::Handle<edm::TriggerResults> triggerTable;
      if(!triggerTable_.isUninitialized()) {
        if( !event.getByToken(triggerTable_, triggerTable) ) return;
      }

      /*
         ------------------------------------------------------------

         Primary Vertex Monitoring

         ------------------------------------------------------------
         */
      // fill monitoring plots for primary verices
      edm::Handle<edm::View<reco::Vertex> > pvs;
      if( !event.getByToken(pvs_, pvs) ) {
        edm::LogWarning( "TopSingleLeptonHLTOfflineDQM" ) 
          << "Vertex collection not found \n";
        return;
      }
      unsigned int pvMult = 0;
      for(edm::View<reco::Vertex>::const_iterator pv=pvs->begin(); pv!=pvs->end(); ++pv){
        if(!pvSelect_ || (*pvSelect_)(*pv))
          pvMult++;
      }
      fill("pvMult_",    pvMult   );

      /* 
         ------------------------------------------------------------

         Electron Monitoring

         ------------------------------------------------------------
         */

      // fill monitoring plots for electrons
      edm::Handle<edm::View<reco::GsfElectron> > elecs;
      if( !event.getByToken(elecs_, elecs) ) {
        edm::LogWarning( "TopSingleLeptonHLTOfflineDQM" ) 
          << "Electron collection not found \n";
        return;
      }

      // check availability of electron id
      edm::Handle<edm::ValueMap<float> > electronId; 
      if(!electronId_.isUninitialized()) {
        if( !event.getByToken(electronId_, electronId) ) return;
      }

      // loop electron collection
      unsigned int eMultIso=0;
      std::vector<const reco::GsfElectron*> isoElecs;
      reco::GsfElectron e;
      for(edm::View<reco::GsfElectron>::const_iterator elec=elecs->begin(); elec!=elecs->end(); ++elec){
        unsigned int idx = elec-elecs->begin();
        // restrict to electrons with good electronId
        if( electronId_.isUninitialized() ? true : ((int)(*electronId)[elecs->refAt(idx)] & eidPattern_) ){
          if(!elecSelect_ || (*elecSelect_)(*elec)){
            if(!elecIso_ || (*elecIso_)(*elec)){ if(eMultIso == 0) e = *elec;  isoElecs.push_back(&(*elec)); ++eMultIso;}
          }
        }
      }

      /* 
         ------------------------------------------------------------

         Muon Monitoring

         ------------------------------------------------------------
         */

      // fill monitoring plots for muons
      unsigned int mMultIso=0;
      edm::Handle<edm::View<reco::Muon> > muons;
      std::vector<const reco::Muon*> isoMuons;
      if( !event.getByToken(muons_, muons) ) {
        edm::LogWarning( "TopSingleLeptonHLTOfflineDQM" ) 
          << "Muon collection not found \n";
        return;
      }
      reco::Muon mu;
      for(edm::View<reco::Muon>::const_iterator muon=muons->begin(); muon!=muons->end(); ++muon){
        // restrict to globalMuons
        if( muon->isGlobalMuon() ){ 
          // apply preselection
          if(!muonSelect_ || (*muonSelect_)(*muon)){
            if(!muonIso_ || (*muonIso_)(*muon)) {if(mMultIso == 0) mu = *muon; isoMuons.push_back(&(*muon)); ++mMultIso;}
          }
        }
      }

      /* 
         ------------------------------------------------------------

         Jet Monitoring

         ------------------------------------------------------------
         */

      // check availability of the btaggers
      edm::Handle<reco::JetTagCollection> btagEff, btagPur, btagVtx;
      if( includeBTag_ ){ 
        if( !event.getByToken(btagEff_, btagEff) ) return;
        if( !event.getByToken(btagPur_, btagPur) ) return;
        if( !event.getByToken(btagVtx_, btagVtx) ) return;
      }
      // load jet corrector if configured such
      const JetCorrector* corrector=0;
      if(!jetCorrector_.empty()){
        // check whether a jet corrector is in the event setup or not
        if(setup.find( edm::eventsetup::EventSetupRecordKey::makeKey<JetCorrectionsRecord>() )){
          corrector = JetCorrector::getJetCorrector(jetCorrector_, setup);
        }
        else{ 
          edm::LogVerbatim( "TopSingleLeptonHLTOfflineDQM" ) 
            << "\n"
            << "------------------------------------------------------------------------------------- \n"
            << " No JetCorrectionsRecord available from EventSetup:                                   \n" 
            << "  - Jets will not be corrected.                                                       \n"
            << "  - If you want to change this add the following lines to your cfg file:              \n"
            << "                                                                                      \n"
            << "  ## load jet corrections                                                             \n"
            << "  process.load(\"JetMETCorrections.Configuration.JetCorrectionServicesAllAlgos_cff\") \n"
            << "  process.prefer(\"ak5CaloL2L3\")                                                     \n"
            << "                                                                                      \n"
            << "------------------------------------------------------------------------------------- \n";
        }
      }

      // loop jet collection
      std::vector<reco::Jet> correctedJets;
      unsigned int mult=0, multBEff=0, multBPur=0, multBVtx=0;

      edm::Handle<edm::View<reco::Jet> > jets; 
      if( !event.getByToken(jets_, jets) ) {
        edm::LogWarning( "TopSingleLeptonHLTOfflineDQM" ) 
          << "Jet collection not found \n";
        return;
      }

      edm::Handle<reco::JetIDValueMap> jetID; 
      if(jetIDSelect_){ 
        if( !event.getByToken(jetIDLabel_, jetID) ) return;
      }
      reco::Jet bJetCand;   
      for(edm::View<reco::Jet>::const_iterator jet=jets->begin(); jet!=jets->end(); ++jet){
        // check jetID for calo jets
        unsigned int idx = jet-jets->begin();
        if( jetIDSelect_ && dynamic_cast<const reco::CaloJet*>(jets->refAt(idx).get())){
          if(!(*jetIDSelect_)((*jetID)[jets->refAt(idx)])) continue;
        }
        // chekc additional jet selection for calo, pf and bare reco jets
        if(dynamic_cast<const reco::CaloJet*>(&*jet)){
          reco::CaloJet sel = dynamic_cast<const reco::CaloJet&>(*jet); sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
          StringCutObjectSelector<reco::CaloJet> jetSelect(jetSelect_); if(!jetSelect(sel)){ continue;}
        }
        else if(dynamic_cast<const reco::PFJet*>(&*jet)){
          reco::PFJet sel= dynamic_cast<const reco::PFJet&>(*jet); sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
          StringCutObjectSelector<reco::PFJet> jetSelect(jetSelect_); if(!jetSelect(sel)) continue;
        } 
        else{
          reco::Jet sel = *jet; sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
          StringCutObjectSelector<reco::Jet> jetSelect(jetSelect_); if(!jetSelect(sel)) continue;
        }

        // prepare jet to fill monitor histograms
        reco::Jet monitorJet = *jet; monitorJet.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
        correctedJets.push_back(monitorJet);
        ++mult; // determine jet multiplicity
        if( includeBTag_ ){
          // fill b-discriminators
          edm::RefToBase<reco::Jet> jetRef = jets->refAt(idx);  
          // for the btagEff collection 
          double btagEffDisc = (*btagEff)[jetRef];
          fill("jetBDiscEff_", btagEffDisc); 
          if( (*btagEff)[jetRef]>btagEffWP_ ) ++multBEff; 
          // for the btagPur collection
          double btagPurDisc = (*btagPur)[jetRef];
          fill("jetBDiscPur_", btagPurDisc); 
          if( (*btagPur)[jetRef]>btagPurWP_ ) {if(multBPur == 0) bJetCand = *jet; ++multBPur;} 
          // for the btagVtx collection
          double btagVtxDisc = (*btagVtx)[jetRef];
          fill("jetBDiscVtx_", btagVtxDisc);
          if( (*btagVtx)[jetRef]>btagVtxWP_ ) ++multBVtx; 
        }
      }
      fill("jetMult_"    , mult    );
      fill("jetMultBEff_", multBEff);
      fill("jetMultBPur_", multBPur);
      fill("jetMultBVtx_", multBVtx);

      /* 
         ------------------------------------------------------------

         MET Monitoring

         ------------------------------------------------------------
         */

      // fill monitoring histograms for met
      reco::MET mET;
      for(std::vector< edm::EDGetTokenT< edm::View<reco::MET> > >::const_iterator met_=mets_.begin(); met_!=mets_.end(); ++met_){
        edm::Handle<edm::View<reco::MET> > met;
        if( !event.getByToken(*met_, met) ) continue;
        if(met->begin()!=met->end()){
          mET = *(met->begin());
        }
      }

      /* 
         ------------------------------------------------------------

         Event Monitoring

         ------------------------------------------------------------
         */

      // fill W boson and top mass estimates
      CalculateHLT eventKinematics(MAXJETS, WMASS);
      double wMass   = eventKinematics.massWBoson  (correctedJets);
      double topMass = eventKinematics.massTopQuark(correctedJets);
      if(wMass>=0 && topMass>=0) {fill("massW_" , wMass  ); fill("massTop_" , topMass);}
      // fill plots for trigger monitoring
      if((lowerEdge_==-1. && upperEdge_==-1.) || (lowerEdge_<wMass && wMass<upperEdge_) ){
        if(!triggerTable_.isUninitialized()) fill(event, *triggerTable, "trigger", triggerPaths_);
        if(logged_<=hists_.find("eventLogger_")->second->getNbinsY()){
          // log runnumber, lumi block, event number & some
          // more pysics infomation for interesting events
          // We're doing a static_cast here to denote the explicity of the cast
          double runID = static_cast<double>(event.eventAuxiliary().run());
          double luminosityBlockID = static_cast<double>(event.eventAuxiliary().luminosityBlock());
          double eventID = static_cast<double>(event.eventAuxiliary().event());
          fill("eventLogger_", 0.5, logged_+0.5, runID); 
          fill("eventLogger_", 1.5, logged_+0.5, luminosityBlockID); 
          fill("eventLogger_", 2.5, logged_+0.5, eventID); 
          ++logged_;
        }
      }
      if(multBPur != 0 && mMultIso == 1 ){
        double mtW = eventKinematics.tmassWBoson(&mu,mET,bJetCand); if (mtW == mtW) fill("MTWm_",mtW);
        double Mlb = eventKinematics.masslb(&mu,mET,bJetCand); if (Mlb == Mlb) fill("mMub_", Mlb);
        double MTT = eventKinematics.tmassTopQuark(&mu,mET,bJetCand); if (MTT == MTT) fill("mMTT_", MTT);
      }

      if(multBPur != 0 && eMultIso == 1 ){
        double mtW = eventKinematics.tmassWBoson(&mu,mET,bJetCand); if (mtW == mtW)fill("MTWe_",mtW);
        double Mlb = eventKinematics.masslb(&mu,mET,bJetCand); if (Mlb == Mlb) fill("mEb_", Mlb);
        double MTT = eventKinematics.tmassTopQuark(&mu,mET,bJetCand); if (MTT == MTT) fill("eMTT_", MTT);
      }


      /* 
         ------------------------------------------------------------

         HLT Objects Monitoring

         ------------------------------------------------------------
         */

      edm::Handle<trigger::TriggerEventWithRefs> triggerEventWithRefsHandle;
      if(event.getByToken(triggerEventWithRefsTag_,triggerEventWithRefsHandle)) {

        const edm::TriggerNames& triggerNames = event.triggerNames(*triggerTable);
        // loop over trigger paths 
        for(unsigned int i=0; i<triggerNames.triggerNames().size(); ++i){
          // consider only path from triggerPaths
          string name = triggerNames.triggerNames()[i];
          bool isInteresting = false;
          for (unsigned int j=0; j<triggerPaths.size(); j++) {
            if (TString(name.c_str()).Contains(TString(triggerPaths[j]), TString::kIgnoreCase)) isInteresting = true; 
          }
          if (!isInteresting) continue;
          // dump infos on the considered trigger path 
          const unsigned int triggerIndex = triggerNames.triggerIndex(name);
          // get modules for the considered trigger path
          const vector<string>& moduleLabels(hltConfig.moduleLabels(triggerIndex));
          const unsigned int moduleIndex(triggerTable->index(triggerIndex));
          // Results from TriggerEventWithRefs product
          electronIds_.clear(); electronRefs_.clear();
          muonIds_.clear();     muonRefs_.clear();
          pfjetIds_.clear();    pfjetRefs_.clear();
          // look only for modules actually run in this path
          unsigned int kElec=0;
          unsigned int kMuon=0;
          unsigned int kJet=0;
          for (unsigned int k=0; k<=moduleIndex; ++k) {
            const string& moduleLabel(moduleLabels[k]);
            const string  moduleType(hltConfig.moduleType(moduleLabel));
            // check whether the module is packed up in TriggerEventWithRef product
            const unsigned int filterIndex(triggerEventWithRefsHandle->filterIndex(edm::InputTag(moduleLabel,"",processName_)));
            if (filterIndex<triggerEventWithRefsHandle->size()) {
              triggerEventWithRefsHandle->getObjects(filterIndex,electronIds_,electronRefs_);
              const unsigned int nElectrons(electronIds_.size());
              if (nElectrons>0) kElec = k;

              triggerEventWithRefsHandle->getObjects(filterIndex,muonIds_,muonRefs_);
              const unsigned int nMuons(muonIds_.size());
              if (nMuons>0) kMuon = k;

              triggerEventWithRefsHandle->getObjects(filterIndex,pfjetIds_,pfjetRefs_);
              const unsigned int nPFJets(pfjetIds_.size());
              if (nPFJets>0) kJet = k;
            }
          }
          bool isMatched = true;
          bool lMatched = false;
          bool j1Matched = false;
          bool j2Matched = false;
          bool j3Matched = false;
          // access to hlt elecs
          double eDeltaRMin = 500.;
          unsigned int eIndMatched = 500;
          electronIds_.clear(); electronRefs_.clear();
          if (kElec > 0) {
            const string& moduleLabelElec(moduleLabels[kElec]);
            const string  moduleTypeElec(hltConfig.moduleType(moduleLabelElec));
            const unsigned int filterIndexElec(triggerEventWithRefsHandle->filterIndex(edm::InputTag(moduleLabelElec,"",processName_)));
            triggerEventWithRefsHandle->getObjects(filterIndexElec,electronIds_,electronRefs_);
            for (unsigned int inde = 0; inde < isoElecs.size(); inde++) {
              double deltar = deltaR(*electronRefs_[0],*isoElecs[inde]); 
              if (deltar < eDeltaRMin) {
                eDeltaRMin = deltar;
                eIndMatched = inde;
              }
            }
            if (eDeltaRMin < DRMIN) lMatched = true;
          }
          // access to hlt muons
          muonIds_.clear(); muonRefs_.clear();
          double mDeltaRMin = 500.;
          unsigned int mIndMatched = 500;
          if (kMuon > 0) {
            const string& moduleLabelMuon(moduleLabels[kMuon]);
            const string  moduleTypeMuon(hltConfig.moduleType(moduleLabelMuon));
            const unsigned int filterIndexMuon(triggerEventWithRefsHandle->filterIndex(edm::InputTag(moduleLabelMuon,"",processName_)));
            triggerEventWithRefsHandle->getObjects(filterIndexMuon,muonIds_,muonRefs_);
            for (unsigned int indm = 0; indm < isoMuons.size(); indm++) {
              double deltar = deltaR(*muonRefs_[0],*isoMuons[indm]); 
              if (deltar < mDeltaRMin) {
                mDeltaRMin = deltar;
                mIndMatched = indm;
              }
            }
            if (mDeltaRMin < DRMIN) lMatched = true;
          }
          // access to hlt pf jets
          const unsigned int nPFJets(pfjetIds_.size());
          pfjetIds_.clear();    pfjetRefs_.clear();
          double j1DeltaRMin = 500.;   
          double j2DeltaRMin = 500.;  
          double j3DeltaRMin = 500.; 
          unsigned int j1IndMatched = 500;
          unsigned int j2IndMatched = 500;
          unsigned int j3IndMatched = 500;
          if (kJet > 0) {
            const string& moduleLabelJet(moduleLabels[kJet]);
            const string  moduleTypeJet(hltConfig.moduleType(moduleLabelJet));
            const unsigned int filterIndexJet(triggerEventWithRefsHandle->filterIndex(edm::InputTag(moduleLabelJet,"",processName_)));
            triggerEventWithRefsHandle->getObjects(filterIndexJet,pfjetIds_,pfjetRefs_);
            for (unsigned int indj = 0; indj < correctedJets.size(); indj++) {
              double deltar1 = deltaR(*pfjetRefs_[0],correctedJets[indj]); 
              if (deltar1 < j1DeltaRMin) {j1DeltaRMin = deltar1; j1IndMatched = indj;}
              if (nPFJets > 1) { 
                double deltar2 = deltaR(*pfjetRefs_[1],correctedJets[indj]); 
                if (deltar2 < j2DeltaRMin) {j2DeltaRMin = deltar2; j2IndMatched = indj;}
                if (nPFJets > 2) {
                  double deltar3 = deltaR(*pfjetRefs_[2],correctedJets[indj]); 
                  if (deltar3 < j3DeltaRMin) {j3DeltaRMin = deltar3; j3IndMatched = indj;}
                }
              }
            }
            if (nPFJets > 0 && j1DeltaRMin < DRMIN) j1Matched = true;
            if (nPFJets > 1 && j2DeltaRMin < DRMIN) j2Matched = true;
            if (nPFJets > 2 && j3DeltaRMin < DRMIN) j3Matched = true;
          }
          if (eIndMatched < 500) {
            fill("leptDeltaREta_", isoElecs[eIndMatched]->eta(), eDeltaRMin);   
            if (lMatched) fill("leptResolution_", fabs(isoElecs[eIndMatched]->pt()-electronRefs_[0]->pt())/isoElecs[eIndMatched]->pt() );   
          }
          if (mIndMatched < 500) {
            fill("leptDeltaREta_", isoMuons[mIndMatched]->eta(), mDeltaRMin);   
            if (lMatched) fill("leptResolution_", fabs(isoMuons[mIndMatched]->pt()-muonRefs_[0]->pt())/isoMuons[mIndMatched]->pt() );   
          }
          if (lMatched) fill("matchingMon_", 0.5 );
          else isMatched = false;
          if (j1IndMatched < 500) {
            fill("jetDeltaREta_", correctedJets[j1IndMatched].eta(), j1DeltaRMin);   
            if (j1Matched) {
              fill("jetResolution_", fabs(correctedJets[j1IndMatched].pt()-pfjetRefs_[0]->pt())/correctedJets[j1IndMatched].pt() );   
              fill("matchingMon_", 1.5 );
            }
            else isMatched = false;
            if (j2IndMatched < 500) {
              fill("jetDeltaREta_", correctedJets[j2IndMatched].eta(), j2DeltaRMin);   
              if (j2Matched) {
                fill("jetResolution_", fabs(correctedJets[j2IndMatched].pt()-pfjetRefs_[1]->pt())/correctedJets[j2IndMatched].pt() );   
                fill("matchingMon_", 2.5 );
              }
              else isMatched = false;
              if (j3IndMatched < 500) {
                fill("jetDeltaREta_", correctedJets[j3IndMatched].eta(), j3DeltaRMin);   
                if (j3Matched) {
                  fill("jetResolution_", fabs(correctedJets[j3IndMatched].pt()-pfjetRefs_[2]->pt())/correctedJets[j3IndMatched].pt() );   
                  fill("matchingMon_", 3.5 );
                }
                else isMatched = false;
              }
            }
          }
          if (isMatched) fill("matchingMon_", 4.5 );

        }

      }
    }

void MonitorSingleLepton::fill ( const edm::Event &  event, const edm::TriggerResults &  triggerTable, std::string  channel, const std::vector< std::string > &  labels  ) const

inlineprivate

fill trigger monitoring histograms

Definition at line 172 of file TopSingleLeptonHLTOfflineDQM.h.

References acceptHLT(), fill(), customizeTrackingMonitorSeedNumber::idx, and monitorPath().

    {
      for(unsigned int idx=0; idx<labels.size(); ++idx){
        if( acceptHLT(event, triggerTable, monitorPath(labels[idx])) ){
          fill((channel+"Mon_").c_str(), idx+0.5 );
        }
      }
    }

void HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::fill ( const std::string  histName, double  value  ) const

inlineprivate

fill histogram if it had been booked before

Definition at line 76 of file TopSingleLeptonHLTOfflineDQM.h.

References booked(), hists_, and edm::second().

{ if(booked(histName.c_str())) hists_.find(histName.c_str())->second->Fill(value); };

void HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::fill ( const std::string  histName, double  xValue, double  yValue  ) const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 78 of file TopSingleLeptonHLTOfflineDQM.h.

References booked(), hists_, and edm::second().

{ if(booked(histName.c_str())) hists_.find(histName.c_str())->second->Fill(xValue, yValue); };

void HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::fill ( const std::string  histName, double  xValue, double  yValue, double  zValue  ) const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 80 of file TopSingleLeptonHLTOfflineDQM.h.

{ if(booked(histName.c_str())) hists_.find(histName.c_str())->second->Fill(xValue, yValue, zValue); };

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::monitorPath ( const std::string &  label ) const

inlineprivate

deduce monitorPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 63 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and triggerBinLabels().

{ return label.substr(label.find(':')+1); };  

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::selectionPath ( const std::string &  label ) const

inlineprivate

deduce selectionPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 66 of file TopSingleLeptonHLTOfflineDQM.h.

{ return label.substr(0, label.find(':')); };  

void MonitorSingleLepton::triggerBinLabels ( std::string  channel, const std::vector< std::string > &  labels  )

inlineprivate

set configurable labels for trigger monitoring histograms

Definition at line 164 of file TopSingleLeptonHLTOfflineDQM.h.

References hists_, customizeTrackingMonitorSeedNumber::idx, and monitorPath().

Referenced by book().

    {
      for(unsigned int idx=0; idx<labels.size(); ++idx){
        hists_[(channel+"Mon_").c_str()]->setBinLabel( idx+1, "["+monitorPath(labels[idx])+"]", 1);
      }
    }

Member Data Documentation

edm::EDGetTokenT< reco::JetTagCollection > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::btagEff_

private

btag discriminator labels

Definition at line 140 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

double HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::btagEffWP_

private

btag working points

Definition at line 144 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< reco::JetTagCollection > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::btagPur_

private

Definition at line 141 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

double HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::btagPurWP_

private

Definition at line 144 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< reco::JetTagCollection > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::btagVtx_

private

Definition at line 142 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

double HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::btagVtxWP_

private

Definition at line 144 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

int HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::eidPattern_

private

electronId pattern we expect the following pattern: 0: fails 1: passes electron ID only 2: passes electron Isolation only 3: passes electron ID and Isolation only 4: passes conversion rejection 5: passes conversion rejection and ID 6: passes conversion rejection and Isolation 7: passes the whole selection As described on https://twiki.cern.ch/twiki/bin/view/CMS/SimpleCutBasedEleID

Definition at line 113 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

StringCutObjectSelector<reco::GsfElectron>* HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::elecIso_

private

extra isolation criterion on electron

Definition at line 115 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< edm::View<reco::GsfElectron> > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::elecs_

private

input sources for monitoring

Definition at line 89 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

StringCutObjectSelector<reco::GsfElectron>* HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::elecSelect_

private

extra selection on electrons

Definition at line 117 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< edm::ValueMap<float> > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::electronId_

private

electronId label

Definition at line 102 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

trigger::Vids HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::electronIds_

private

Definition at line 155 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

trigger::VRelectron HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::electronRefs_

private

Definition at line 156 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::folder_

private

Definition at line 80 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by book(), and MonitorSingleLepton().

std::map<std::string,MonitorElement*> HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::hists_

private

histogram container

Definition at line 151 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by book(), booked(), fill(), and triggerBinLabels().

bool HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::includeBTag_

private

include btag information or not to be determined from the cfg

Definition at line 138 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::jetCorrector_

private

jetCorrector

Definition at line 128 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< reco::JetIDValueMap > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::jetIDLabel_

private

jetID as an extra selection type

Definition at line 130 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

StringCutObjectSelector<reco::JetID>* HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::jetIDSelect_

private

extra jetID selection on calo jets

Definition at line 132 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< edm::View<reco::Jet> > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::jets_

private

Definition at line 91 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::jetSelect_

private

extra selection on jets (here given as std::string as it depends on the the jet type, which selections are valid and which not)

Definition at line 135 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::label_

private

instance label

Definition at line 85 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by Mixins._Labelable::_findDependencies(), book(), and Mixins._Labelable::setLabel().

int HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::logged_

private

number of logged interesting events

Definition at line 149 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

double HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::lowerEdge_

private

mass window upper and lower edge

Definition at line 146 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

std::vector< edm::EDGetTokenT< edm::View<reco::MET> > > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::mets_

private

considers a vector of METs

Definition at line 87 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

trigger::Vids HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::muonIds_

private

Definition at line 157 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

StringCutObjectSelector<reco::Muon>* HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::muonIso_

private

extra isolation criterion on muon

Definition at line 123 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

trigger::VRmuon HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::muonRefs_

private

Definition at line 158 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

edm::EDGetTokenT< edm::View<reco::Muon> > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::muons_

private

Definition at line 90 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

StringCutObjectSelector<reco::Muon>* HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::muonSelect_

private

extra selection on muons

Definition at line 125 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

trigger::Vids HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::pfjetIds_

private

Definition at line 159 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

trigger::VRpfjet HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::pfjetRefs_

private

Definition at line 160 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill().

std::string HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::processName_

private

hlt objects

Definition at line 154 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< edm::View<reco::Vertex> > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::pvs_

private

Definition at line 92 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

StringCutObjectSelector<reco::Vertex>* HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::pvSelect_

private

extra selection on primary vertices; meant to investigate the pile-up effect

Definition at line 120 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

edm::EDGetTokenT< trigger::TriggerEventWithRefs > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::triggerEventWithRefsTag_

private

Definition at line 96 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

std::vector<std::string> HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::triggerPaths_

private

trigger paths for monitoring, expected to be of form signalPath:MonitorPath

Definition at line 99 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by book(), fill(), and MonitorSingleLepton().

edm::EDGetTokenT< edm::TriggerResults > HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::triggerTable_

private

trigger table

Definition at line 95 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().

double HLTOfflineDQMTopSingleLepton::MonitorSingleLepton::upperEdge_

private

Definition at line 146 of file TopSingleLeptonHLTOfflineDQM.h.

Referenced by fill(), and MonitorSingleLepton().