|
|
|
#include <RadialStripTopology.h>
Public Member Functions | |
| virtual float | angularWidth () const =0 |
| virtual float | centreToIntersection () const =0 |
| virtual int | channel (const LocalPoint &) const =0 |
| virtual float | detHeight () const =0 |
| virtual LocalError | localError (float strip, float stripErr2) const =0 |
| virtual LocalError | localError (const MeasurementPoint &, const MeasurementError &) const =0 |
| virtual float | localPitch (const LocalPoint &) const =0 |
| virtual LocalPoint | localPosition (float strip) const =0 |
| virtual LocalPoint | localPosition (const MeasurementPoint &) const =0 |
| virtual float | localStripLength (const LocalPoint &) const =0 |
| virtual MeasurementError | measurementError (const LocalPoint &, const LocalError &) const =0 |
| virtual MeasurementPoint | measurementPosition (const LocalPoint &) const =0 |
| virtual int | nearestStrip (const LocalPoint &) const =0 |
| virtual int | nstrips () const =0 |
| virtual float | originToIntersection () const =0 |
| virtual float | phiOfOneEdge () const =0 |
| virtual float | phiPitch (void) const =0 |
| virtual float | pitch () const |
| virtual float | strip (const LocalPoint &) const =0 |
| virtual float | stripAngle (float strip) const =0 |
| virtual float | stripLength () const =0 |
| virtual float | xOfStrip (int strip, float y) const =0 |
| virtual float | yAxisOrientation () const =0 |
| virtual float | yCentreOfStripPlane () const =0 |
| virtual float | yDistanceToIntersection (float y) const =0 |
| virtual float | yExtentOfStripPlane () const =0 |
| virtual | ~RadialStripTopology () |
 Public Member Functions inherited from StripTopology | |
| virtual float | coveredStrips (const LocalPoint &lp1, const LocalPoint &lp2) const |
| virtual LocalError | localError (float strip, float stripErr2, const Topology::LocalTrackPred &) const |
| conversion taking also the angle from the predicted track state More... | |
| virtual float | localPitch (const LocalPoint &lp, const Topology::LocalTrackAngles &) const |
| conversion taking also the angle from the track state (LocalTrajectoryParameters) More... | |
| virtual LocalPoint | localPosition (float strip, const Topology::LocalTrackPred &) const |
| conversion taking also the predicted track state More... | |
| virtual float | localStripLength (const LocalPoint &lp, const Topology::LocalTrackAngles &) const |
| conversion taking also the angle from the track state (LocalTrajectoryParameters) More... | |
| virtual float | strip (const LocalPoint &lp, const Topology::LocalTrackAngles &) const |
| conversion taking also the angle from the track state (LocalTrajectoryParameters) More... | |
| virtual | ~StripTopology () |
| Public Member Functions inherited from Topology | |
| virtual int | channel (const LocalPoint &lp, const LocalTrackAngles &) const |
| conversion taking also the angle from the track state More... | |
| virtual LocalError | localError (const MeasurementPoint &mp, const MeasurementError &me, const LocalTrackPred &) const |
| conversion taking also the angle from the predicted track state More... | |
| virtual LocalPoint | localPosition (const MeasurementPoint &mp, const LocalTrackPred &) const |
| conversion taking also the angle from the predicted track state More... | |
| virtual MeasurementError | measurementError (const LocalPoint &lp, const LocalError &le, const LocalTrackAngles &) const |
| conversion taking also the angle from the track state More... | |
| virtual MeasurementPoint | measurementPosition (const LocalPoint &lp, const LocalTrackAngles &) const |
| conversion taking also the angle from the track state More... | |
| virtual | ~Topology () |
Friends | |
| std::ostream & | operator<< (std::ostream &, const RadialStripTopology &) |
Additional Inherited Members | |
| Public Types inherited from Topology | |
| typedef Point2DBase< double, LocalTag > | Local2DPoint |
| typedef Vector2D::MathVector | MathVector2D |
| typedef Basic2DVector< double > | Vector2D |
A StripTopology in which the component strips subtend a constant angular width, and, if projected, intersect at a point.
WARNING! Wherever 'float strip' is used the units of 'strip' are angular widths of each strip. The range is from 0.0 at the extreme edge of the 'first' strip at one edge of the detector, to nstrip*angular width at the other edge.
The centre of the first strip is at strip = 0.5
The centre of the last strip is at strip = 0.5 + (nstrip-1)
This is for consistency with CommonDet usage of 'float strip' (but where units are strip pitch rather than strip angular width.)
WARNING! If the mid-point along local y of the plane of strips does not correspond to the local coordinate origin, set the final ctor argument appropriately.
Original version, allows inheritance
A StripTopology in which the component strips subtend a constant angular width, and, if projected, intersect at a point.
WARNING! Wherever 'float strip' is used the units of 'strip' are angular widths of each strip. The range is from 0.0 at the extreme edge of the 'first' strip at one edge of the detector, to nstrip*angular width at the other edge.
The centre of the first strip is at strip = 0.5
The centre of the last strip is at strip = 0.5 + (nstrip-1)
This is for consistency with CommonDet usage of 'float strip' (but where units are strip pitch rather than strip angular width.)
WARNING! If the mid-point along local y of the plane of strips does not correspond to the local coordinate origin, set the final ctor argument appropriately.
now is an abstract class to allow different specialization for tracker and muon
Definition at line 28 of file RadialStripTopology.h.
|
inlinevirtual |
|
pure virtual |
Angular width of a each strip
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
Distance from the intersection of the projections of the extreme edges of the two extreme strips to the symmetry centre of the plane of strips.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by operator<<().
|
pure virtual |
Channel number corresponding to a given LocalPoint.
This is effectively an integer version of strip(), with range 0 to nstrips-1.
LocalPoints outside the detector strip plane will be considered as contributing to the edge channels 0 or nstrips-1.
Implements Topology.
Implemented in TkRadialStripTopology, CSCRadialStripTopology, OffsetRadialStripTopology, CSCUngangedStripTopology, and CSCGangedStripTopology.
|
pure virtual |
Length of long symmetry axis of plane of strips
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), operator<<(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
LocalError for a pure strip measurement, where 'strip' is the (float) position (a 'phi' angle wrt y axis) and stripErr2 is the sigma-squared. Both quantities are expressed in units of theAngularWidth of a strip.
Implements StripTopology.
Implemented in CSCRadialStripTopology, and TkRadialStripTopology.
|
pure virtual |
LocalError for a given MeasurementPoint with known MeasurementError. This may be used in Kalman filtering and hence must allow possible correlations between the components.
Implements Topology.
Implemented in CSCRadialStripTopology, and TkRadialStripTopology.
|
pure virtual |
Pitch (strip width) at a given LocalPoint.
BEWARE: are you sure you really want to call this for a RadialStripTopology?
Implements StripTopology.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
|
pure virtual |
LocalPoint on x axis for given 'strip' 'strip' is a float in units of the strip (angular) width
Implements StripTopology.
Implemented in CSCRadialStripTopology, TkRadialStripTopology, and OffsetRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities().
|
pure virtual |
LocalPoint for a given MeasurementPoint
What's a MeasurementPoint?
In analogy with that used with TrapezoidalStripTopology objects, a MeasurementPoint is a 2-dim object.
The first dimension measures the angular position wrt central line of symmetry of detector, in units of strip (angular) widths (range 0 to total angle subtended by a detector).
The second dimension measures the fractional position along the strip (range -0.5 to +0.5).
BEWARE! The components are not Cartesian.
Implements Topology.
Implemented in CSCRadialStripTopology, TkRadialStripTopology, and OffsetRadialStripTopology.
|
pure virtual |
Length of a strip passing through a given LocalPpoint
Implements StripTopology.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
Implements Topology.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), ApeEstimator::positionAndError2(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
Implements Topology.
Implemented in TkRadialStripTopology, CSCRadialStripTopology, and OffsetRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
Nearest strip to given LocalPoint
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
|
pure virtual |
Total number of strips
Implements StripTopology.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by operator<<().
|
pure virtual |
(y) distance from intersection of the projections of the strips to the local coordinate origin. Same as centreToIntersection() if symmetry centre of strip plane coincides with local origin.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
Convenience function to access azimuthal angle of extreme edge of first strip measured relative to long symmetry axis of the plane of strips.
WARNING! This angle is measured clockwise from the local y axis which means it is in the conventional azimuthal phi plane, but azimuth is of course measured from local x axis not y. The range of this angle is -(full angle)/2 to +(full angle)/2.
where (full angle) = nstrips() * angularWidth().
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by operator<<().
|
pure virtual |
Phi pitch of each strip (= angular width!)
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by operator<<().
|
virtual |
BEWARE: calling pitch() throws an exception.
Pitch is conventional name for width of something, but this is not sensible for a RadialStripTopology since strip widths vary with local y. Use localPitch(.) instead.
Implements StripTopology.
Definition at line 4 of file RadialStripTopology.cc.
References Exception.
|
pure virtual |
Strip in which a given LocalPoint lies. This is a float which represents the fractional strip position within the detector.
Returns zero if the LocalPoint falls at the extreme low edge of the detector or BELOW, and float(nstrips) if it falls at the extreme high edge or ABOVE.
Implements StripTopology.
Implemented in CSCRadialStripTopology, TkRadialStripTopology, and OffsetRadialStripTopology.
|
pure virtual |
Angle between strip and symmetry axis (=local y axis) for given strip.
This is like a phi angle but measured clockwise from y axis rather than counter clockwise from x axis. Note that 'strip' is a float with a continuous range from 0 to float(nstrips) to cover the whole detector, and the centres of strips correspond to half-integer values 0.5, 1.5, ..., nstrips-0.5 whereas values 1, 2, ... nstrips correspond to the upper phi edges of the strips.
Implements StripTopology.
Implemented in TkRadialStripTopology, CSCRadialStripTopology, and OffsetRadialStripTopology.
Referenced by TrackerValidationVariables::fillHitQuantities(), and ApeEstimator::radialPositionAndError2().
|
pure virtual |
Height of detector (= length of long symmetry axis of the plane of strips).
Implements StripTopology.
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
|
pure virtual |
Local x where centre of strip intersects input local y
'strip' should be in range 1 to nstrips()
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
|
pure virtual |
y axis orientation, 1 means detector width increases with local y
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by operator<<().
|
pure virtual |
Offset in local y between midpoint of detector (strip plane) extent and local origin
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
Referenced by operator<<().
|
pure virtual |
Distance in local y from a hit to the point of intersection of projected strips
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
|
pure virtual |
y extent of strip plane
Implemented in TkRadialStripTopology, and CSCRadialStripTopology.
|
friend |
Definition at line 10 of file RadialStripTopology.cc.
1.8.5
