DDSolidFactory Struct Reference

#include <DDSolid.h>

Static Public Member Functions
static DDSolid	box (const DDName &name, double xHalf, double yHalf, double zHalf)
	Creates a box with side length 2*xHalf, 2*yHalf, 2*zHalf. More...
static DDSolid	cons (const DDName &name, double zhalf, double rInMinusZ, double rOutMinusZ, double rInPlusZ, double rOutPlusZ, double phiFrom, double deltaPhi)
static DDSolid	ellipsoid (const DDName &name, double xSemiAxis, double ySemiAxis, double zSemiAxis, double zBottomCut=0., double zTopCut=0.)
static DDSolid	ellipticalTube (const DDName &name, double xSemiAxis, double ySemiAxis, double zHeight)
static DDSolid	intersection (const DDName &name, const DDSolid &a, const DDSolid &b, const DDTranslation &t, const DDRotation &r)
static DDSolid	orb (const DDName &name, double radius)
static DDSolid	parallelepiped (const DDName &name, double xHalf, double yHalf, double zHalf, double alpha, double theta, double phi)
static DDSolid	polycone (const DDName &name, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &rmin, const std::vector< double > &rmax)
	Creates a polycone (refere to Geant3 or Geant4 documentation) More...
static DDSolid	polycone (const DDName &name, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &r)
	Creates a polycone (refere to Geant4 documentation) More...
static DDSolid	polyhedra (const DDName &name, int sides, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &rmin, const std::vector< double > &rmax)
	Creates a polyhedra (refere to Geant3 or Geant4 documentation) More...
static DDSolid	polyhedra (const DDName &name, int sides, double startPhi, double deltaPhi, const std::vector< double > &z, const std::vector< double > &r)
	Creates a polyhedra (refere to Geant4 documentation) More...
static DDSolid	pseudoTrap (const DDName &name, double pDx1, double pDx2, double pDy1, double pDy2, double pDz, double radius, bool atMinusZ)
static DDSolid	reflection (const DDName &name, const DDSolid &s)
static DDSolid	shapeless (const DDName &name)
static DDSolid	sphere (const DDName &name, double innerRadius, double outerRadius, double startPhi, double deltaPhi, double startTheta, double deltaTheta)
static DDSolid	subtraction (const DDName &name, const DDSolid &a, const DDSolid &b, const DDTranslation &t, const DDRotation &r)
static DDSolid	torus (const DDName &name, double rMin, double rMax, double rTorus, double startPhi, double deltaPhi)
static DDSolid	trap (const DDName &name, double pDz, double pTheta, double pPhi, double pDy1, double pDx1, double pDx2, double pAlp1, double pDy2, double pDx3, double pDx4, double pAlp2)
static DDSolid	truncTubs (const DDName &name, double zHalf, double rIn, double rOut, double startPhi, double deltaPhi, double cutAtStart, double cutAtDelta, bool cutInside)
static DDSolid	tubs (const DDName &name, double zhalf, double rIn, double rOut, double startPhi, double deltaPhi)
static DDSolid	unionSolid (const DDName &name, const DDSolid &a, const DDSolid &b, const DDTranslation &t, const DDRotation &r)

Detailed Description

Definition at line 391 of file DDSolid.h.

Member Function Documentation

DDSolid DDSolidFactory::box ( const DDName &  name, double  xHalf, double  yHalf, double  zHalf  )

static

Creates a box with side length 2*xHalf, 2*yHalf, 2*zHalf.

• name unique name identifying the box
• xHalf half length in x
• yHalf half length in y
• zHalf helf length in z The center of the box (for positioning) is the center of gravity.

Definition at line 519 of file DDSolid.cc.

Referenced by DDHCalBarrelAlgo::constructInsideDetectors(), DDHCalBarrelAlgo::constructInsideLayers(), DDEcalPreshowerAlgo::doLadders(), DDEcalPreshowerAlgoTB::doLayers(), DDEcalPreshowerAlgo::doLayers(), DDTIBLayerAlgo_MTCC::execute(), DDHCalForwardAlgo::execute(), DDHCalTBCableAlgo::execute(), DDTIDModuleAlgo::execute(), DDTECModuleAlgo::execute(), DDEcalAPDAlgo::execute(), DDTBH4Algo::execute(), DDEcalBarrelNewAlgo::execute(), DDEcalBarrelAlgo::execute(), DDEcalEndcapAlgo::execute(), DDDividedBoxX::makeDDLogicalPart(), DDDividedBoxY::makeDDLogicalPart(), DDDividedBoxZ::makeDDLogicalPart(), DDLBox::processElement(), regressionTest_first(), and regressionTest_setup().

{
  return DDSolid(name, new DDI::Box(xHalf, yHalf, zHalf ));
}

DDSolid DDSolidFactory::cons ( const DDName &  name, double  zhalf, double  rInMinusZ, double  rOutMinusZ, double  rInPlusZ, double  rOutPlusZ, double  phiFrom, double  deltaPhi  )

static

Definition at line 763 of file DDSolid.cc.

Referenced by DDHCalFibreBundle::execute(), DDDividedConsRho::makeDDLogicalPart(), DDDividedConsPhi::makeDDLogicalPart(), DDDividedConsZ::makeDDLogicalPart(), DDDividedPolyconeZ::makeDDLogicalPart(), and DDLCone::processElement().

{
  return DDSolid(name, new DDI::Cons(zhalf,
                                     rInMinusZ, rOutMinusZ,
                     rInPlusZ, rOutPlusZ,
                     phiFrom, deltaPhi));
}            

DDSolid DDSolidFactory::ellipsoid ( const DDName &  name, double  xSemiAxis, double  ySemiAxis, double  zSemiAxis, double  zBottomCut = 0., double  zTopCut = 0.  )

static

Definition at line 821 of file DDSolid.cc.

Referenced by DDLEllipsoid::processElement().

{
  return DDSolid(name, new DDI::Ellipsoid( xSemiAxis,
                       ySemiAxis,
                       zSemiAxis,
                       zBottomCut,
                       zTopCut
                      ));
}            

DDSolid DDSolidFactory::ellipticalTube ( const DDName &  name, double  xSemiAxis, double  ySemiAxis, double  zHeight  )

static

Definition at line 815 of file DDSolid.cc.

Referenced by DDLEllipticalTube::processElement().

{
  return DDSolid(name, new DDI::EllipticalTube(xSemiAxis, ySemiAxis, zHeight));
}            

DDSolid DDSolidFactory::intersection ( const DDName &  name, const DDSolid &  a, const DDSolid &  b, const DDTranslation &  t, const DDRotation &  r  )

static

Definition at line 714 of file DDSolid.cc.

Referenced by DDLBooleanSolid::processElement(), and DDStreamer::solids_read().

{
  return DDSolid(name, new DDI::Intersection(a,b,t,r));
}

DDSolid DDSolidFactory::orb ( const DDName &  name, double  radius  )

static

Definition at line 810 of file DDSolid.cc.

Referenced by DDLOrb::processElement().

{
  return DDSolid(name, new DDI::Orb(radius));
}            

DDSolid DDSolidFactory::parallelepiped ( const DDName &  name, double  xHalf, double  yHalf, double  zHalf, double  alpha, double  theta, double  phi  )

static

Definition at line 838 of file DDSolid.cc.

Referenced by DDLParallelepiped::processElement().

{
  return DDSolid(name, new DDI::Parallelepiped(xHalf, yHalf, zHalf,
                           alpha, theta, phi));
}            

DDSolid DDSolidFactory::polycone ( const DDName &  name, double  startPhi, double  deltaPhi, const std::vector< double > &  z, const std::vector< double > &  rmin, const std::vector< double > &  rmax  )

static

Creates a polycone (refere to Geant3 or Geant4 documentation)

The center of the polycone (for positioning) is the center of coordinates of the polycone definition (x=y=z=0)

Definition at line 656 of file DDSolid.cc.

Referenced by DDTIBRadCableAlgo_MTCC::execute(), DDTOBRadCableAlgo::execute(), DDTIDAxialCableAlgo::execute(), DDTECAxialCableAlgo::execute(), DDEcalBarrelNewAlgo::execute(), DDEcalBarrelAlgo::execute(), DDDividedPolyconeRho::makeDDLogicalPart(), DDDividedPolyconePhi::makeDDLogicalPart(), and DDLPolyGenerator::processElement().

{
  return DDSolid(name, new DDI::Polycone(startPhi, deltaPhi, z, rmin, rmax));
}

DDSolid DDSolidFactory::polycone ( const DDName &  name, double  startPhi, double  deltaPhi, const std::vector< double > &  z, const std::vector< double > &  r  )

static

Creates a polycone (refere to Geant4 documentation)

The center of the polycone (for positioning) is the center of coordinates of the polycone definition (x=y=z=0)

Definition at line 665 of file DDSolid.cc.

{
  return DDSolid(name, new DDI::Polycone(startPhi, deltaPhi, z, r));
}                         

DDSolid DDSolidFactory::polyhedra ( const DDName &  name, int  sides, double  startPhi, double  deltaPhi, const std::vector< double > &  z, const std::vector< double > &  rmin, const std::vector< double > &  rmax  )

static

Creates a polyhedra (refere to Geant3 or Geant4 documentation)

The center of the polyhedra (for positioning) is the center of coordinates of the polyhedra definition (x=y=z=0)

Definition at line 673 of file DDSolid.cc.

Referenced by DDHCalBarrelAlgo::constructGeneralVolume(), DDHCalEndcapAlgo::constructGeneralVolume(), DDHCalBarrelAlgo::constructInsideSector(), DDHCalEndcapAlgo::constructInsideSector(), DDHCalBarrelAlgo::constructMidLayer(), DDHCalBarrelAlgo::constructSideLayer(), DDHCalTBCableAlgo::execute(), DDDividedPolyhedraRho::makeDDLogicalPart(), DDDividedPolyhedraPhi::makeDDLogicalPart(), DDDividedPolyhedraZ::makeDDLogicalPart(), and DDLPolyGenerator::processElement().

{       
  return DDSolid(name, new DDI::Polyhedra(sides,  startPhi, deltaPhi, z, rmin,rmax));     
}

DDSolid DDSolidFactory::polyhedra ( const DDName &  name, int  sides, double  startPhi, double  deltaPhi, const std::vector< double > &  z, const std::vector< double > &  r  )

static

Creates a polyhedra (refere to Geant4 documentation)

The center of the polyhedra (for positioning) is the center of coordinates of the polyhedra definition (x=y=z=0)

Definition at line 685 of file DDSolid.cc.

{
  return DDSolid(name, new DDI::Polyhedra(sides,  startPhi, deltaPhi, z, r));
}

DDSolid DDSolidFactory::pseudoTrap ( const DDName &  name, double  pDx1, double  pDx2, double  pDy1, double  pDy2, double  pDz, double  radius, bool  atMinusZ  )

static

if true, the cut-out or rounding is applied at -dz, else at +dz

Parameters

pDx1	Half-length along x at the surface positioned at -dz
pDx2	Half-length along x at the surface positioned at +dz
pDy1	Half-length along y at the surface positioned at -dz
pDy2	Half-length along y at the surface positioned at +dz
pDz	Half of the height of the pseudo trapezoid along z
radius	radius of the cut-out (negative sign) or rounding (pos. sign)
atMinusZ	if true, the cut-out or rounding is applied at -dz, else at +dz

Definition at line 737 of file DDSolid.cc.

Referenced by DDLPseudoTrap::processElement().

{
   return DDSolid(name, new DDI::PseudoTrap(pDx1, pDx2, pDy1, pDy2, pDz, radius, atMinusZ));
}

DDSolid DDSolidFactory::reflection ( const DDName &  name, const DDSolid &  s  )

static

Definition at line 852 of file DDSolid.cc.

Referenced by DDLReflectionSolid::processElement(), and DDStreamer::solids_read().

{
  return DDSolid(name, new DDI::Reflection(s));
}                  

DDSolid DDSolidFactory::shapeless ( const DDName &  name )

static

Definition at line 846 of file DDSolid.cc.

Referenced by DDLShapelessSolid::processElement(), and regressionTest_setup().

{
  return DDSolid(name, new DDI::Shapeless());
}  

DDSolid DDSolidFactory::sphere ( const DDName &  name, double  innerRadius, double  outerRadius, double  startPhi, double  deltaPhi, double  startTheta, double  deltaTheta  )

static

Definition at line 797 of file DDSolid.cc.

Referenced by DDLSphere::processElement().

{
  return DDSolid(name, new DDI::Sphere(innerRadius, outerRadius, 
                       startPhi, deltaPhi,
                       startTheta, deltaTheta));
}            

DDSolid DDSolidFactory::subtraction ( const DDName &  name, const DDSolid &  a, const DDSolid &  b, const DDTranslation &  t, const DDRotation &  r  )

static

Definition at line 705 of file DDSolid.cc.

Referenced by DDEcalPreshowerAlgo::doLayers(), DDEcalEndcapAlgo::EECreateSC(), DDTIDModuleAlgo::execute(), DDEcalBarrelNewAlgo::execute(), DDEcalBarrelAlgo::execute(), DDLBooleanSolid::processElement(), and DDStreamer::solids_read().

{
  return DDSolid(name, new DDI::Subtraction(a,b,t,r));
}

DDSolid DDSolidFactory::torus ( const DDName &  name, double  rMin, double  rMax, double  rTorus, double  startPhi, double  deltaPhi  )

static

Definition at line 778 of file DDSolid.cc.

Referenced by DDTOBRadCableAlgo::execute(), and DDLTorus::processElement().

{
  return DDSolid(name, new DDI::Torus(rMin, rMax, rTorus, startPhi, deltaPhi));
}            

DDSolid DDSolidFactory::trap ( const DDName &  name, double  pDz, double  pTheta, double  pPhi, double  pDy1, double  pDx1, double  pDx2, double  pAlp1, double  pDy2, double  pDx3, double  pDx4, double  pAlp2  )

static

Definition at line 723 of file DDSolid.cc.

Referenced by DDHCalEndcapModuleAlgo::constructInsideModule(), DDHCalEndcapAlgo::constructInsideModule(), DDHCalEndcapModuleAlgo::constructInsideModule0(), DDHCalEndcapAlgo::constructInsideModule0(), DDHGCalEEAlgo::constructLayers(), DDHGCalHEAlgo::constructLayers(), DDHCalEndcapModuleAlgo::constructScintLayer(), DDHCalEndcapAlgo::constructScintLayer(), DDEcalPreshowerAlgo::doLadders(), DDEcalEndcapAlgo::EECreateCR(), DDEcalEndcapAlgo::EECreateSC(), DDHCalTBCableAlgo::execute(), DDPixBarLayerUpgradeAlgoCoverage::execute(), DDTIDModuleAlgo::execute(), DDPixBarLayerAlgo::execute(), DDPixBarTPGStackLayerAlgo::execute(), DDPixBarStackLayerAlgo::execute(), DDTECModuleAlgo::execute(), DDDividedTrdX::makeDDLogicalPart(), DDDividedTrdY::makeDDLogicalPart(), DDDividedTrdZ::makeDDLogicalPart(), DDEcalBarrelNewAlgo::mytrap(), DDEcalBarrelAlgo::mytrap(), and DDLTrapezoid::processElement().

{
  return DDSolid(name, new DDI::Trap(pDz, pTheta, pPhi,
                                     pDy1, pDx1, pDx2, pAlp1,
                     pDy2, pDx3, pDx4, pAlp2));
}                    

DDSolid DDSolidFactory::truncTubs ( const DDName &  name, double  zHalf, double  rIn, double  rOut, double  startPhi, double  deltaPhi, double  cutAtStart, double  cutAtDelta, bool  cutInside  )

static

Parameters

zHalf	half-length of the z-axis
rIn	inner radius of the tube-section
rOut	outer radius of the tube-section
startPhi	starting angle of the tube-section
deltaPhi	spanning angle of the tube-section
cutAtStart	tructation
cutAtDelta	truncation at deltaPhi side

Definition at line 750 of file DDSolid.cc.

Referenced by DDLTubs::processElement().

{
  return DDSolid(name, new DDI::TruncTubs(zHalf,rIn,rOut,startPhi,deltaPhi,cutAtStart,cutAtDelta,cutInside));
}                 

DDSolid DDSolidFactory::tubs ( const DDName &  name, double  zhalf, double  rIn, double  rOut, double  startPhi, double  deltaPhi  )

static

Definition at line 788 of file DDSolid.cc.

Referenced by DDEcalPreshowerAlgo::doLayers(), DDTIBLayerAlgo_MTCC::execute(), DDPixBarStackTrigLayerAlgo::execute(), DDTOBRadCableAlgo::execute(), DDPixBarLayerUpgradeAlgoCoverage::execute(), DDPixBarStackLayerAlgo::execute(), DDTIBRadCableAlgo_MTCC::execute(), DDPixBarTPGStackLayerAlgo::execute(), DDPixBarLayerAlgo::execute(), DDPixBarLayerUpgradeAlgo::execute(), DDTIBLayerAlgo::execute(), DDTOBAxCableAlgo::execute(), DDTIDAxialCableAlgo::execute(), DDTBH4Algo::execute(), DDEcalBarrelAlgo::execute(), DDEcalBarrelNewAlgo::execute(), DDDividedTubsRho::makeDDLogicalPart(), DDDividedTubsPhi::makeDDLogicalPart(), DDDividedTubsZ::makeDDLogicalPart(), and DDLTubs::processElement().

{            
  return DDSolid(name, new DDI::Tubs(zhalf,rIn,rOut,phiFrom,deltaPhi));
}

DDSolid DDSolidFactory::unionSolid ( const DDName &  name, const DDSolid &  a, const DDSolid &  b, const DDTranslation &  t, const DDRotation &  r  )

static

Definition at line 696 of file DDSolid.cc.

Referenced by DDEcalPreshowerAlgo::doLadders(), DDLBooleanSolid::processElement(), and DDStreamer::solids_read().

{
  return DDSolid(name, new DDI::Union(a,b,t,r));
}