Inheritance diagram for edm::NavigateEventsLooper:

Public Member Functions
virtual Status	duringLoop (Event const &ev, EventSetup const &es, ProcessingController &pc) override

virtual Status	endOfLoop (EventSetup const &es, unsigned int iCounter) override

	NavigateEventsLooper (ParameterSet const &pset)

virtual void	startingNewLoop (unsigned int iIteration) override

virtual	~NavigateEventsLooper ()

Public Member Functions inherited from edm::EDLooperBase
virtual void	attachTo (ActivityRegistry &)
	Override this method if you need to monitor the state of the processing. More...

virtual void	beginOfJob (EventSetup const &)

virtual void	beginOfJob ()

void	copyInfo (ScheduleInfo const &)

void	doBeginLuminosityBlock (LuminosityBlockPrincipal &, EventSetup const &, ProcessContext *)

void	doBeginRun (RunPrincipal &, EventSetup const &, ProcessContext *)

Status	doDuringLoop (EventPrincipal &eventPrincipal, EventSetup const &es, ProcessingController &, StreamContext *)

void	doEndLuminosityBlock (LuminosityBlockPrincipal &, EventSetup const &, ProcessContext *)

Status	doEndOfLoop (EventSetup const &es)

void	doEndRun (RunPrincipal &, EventSetup const &, ProcessContext *)

void	doStartingNewLoop ()

	EDLooperBase ()

	EDLooperBase (EDLooperBase const &)=delete

virtual void	endOfJob ()

virtual std::set < eventsetup::EventSetupRecordKey >	modifyingRecords () const

EDLooperBase &	operator= (EDLooperBase const &)=delete

void	prepareForNextLoop (eventsetup::EventSetupProvider *esp)

void	setActionTable (ExceptionToActionTable const *actionTable)

void	setModuleChanger (ModuleChanger const *)

virtual	~EDLooperBase ()

Private Member Functions
	NavigateEventsLooper (NavigateEventsLooper const &)

NavigateEventsLooper const &	operator= (NavigateEventsLooper const &)

Private Attributes
int	countLoops_

int	maxLoops_

bool	shouldStopLoop_

bool	shouldStopProcess_

Additional Inherited Members
Public Types inherited from edm::EDLooperBase
enum	Status { kContinue, kStop }

Protected Member Functions inherited from edm::EDLooperBase
ModuleChanger const *	moduleChanger () const
	This only returns a non-zero value during the call to endOfLoop. More...

ScheduleInfo const *	scheduleInfo () const
	This returns a non-zero value after the constructor has been called. More...

Detailed Description

Allows interactive navigation from event to event in cmsRun jobs. Just add the looper to the python configuration and then respond to the questions that show up on the display by typing a number followed by return.

This was originally written to test the looper interface used by the Fireworks event display. It might be useful by itself.

If you use this either do not use a PoolOutputModule or turn off fast cloning its configuration.

Author: W. David Dagenhart, created 27 August, 2010

Definition at line 29 of file NavigateEventsLooper.cc.

Constructor & Destructor Documentation

edm::NavigateEventsLooper::NavigateEventsLooper ( ParameterSet const & pset )

Definition at line 49 of file NavigateEventsLooper.cc.

                                                                      :
     maxLoops_(pset.getUntrackedParameter<int>("maxLoops", -1)),
     countLoops_(0),
     shouldStopLoop_(false),
     shouldStopProcess_(false) {
   }

edm::NavigateEventsLooper::~NavigateEventsLooper ( )

virtual

Definition at line 56 of file NavigateEventsLooper.cc.

56 {

57 }

edm::NavigateEventsLooper::NavigateEventsLooper ( NavigateEventsLooper const & )

private

Member Function Documentation

EDLooperBase::Status edm::NavigateEventsLooper::duringLoop	(	Event const &	,
		EventSetup const &	,
		ProcessingController &
	)

overridevirtual

Called after all event modules have had a chance to process the Event.

Implements edm::EDLooperBase.

Definition at line 64 of file NavigateEventsLooper.cc.

                                                                                             {
 
     if(!pc.lastOperationSucceeded()) {
       std::cout << "Event could not be found. Nothing done. Try again.\n";
     }
 
     std::cout << "\nWhat should we do next?\n";
 
     if(pc.forwardState() == ProcessingController::kEventsAheadInFile) {
       std::cout << "(0) process the next event\n";
     } else if(pc.forwardState() == ProcessingController::kNextFileExists) {
       std::cout << "(0) process the next event if it exists (at last event in the open file. there are more files)\n";
     } else if(pc.forwardState() == ProcessingController::kAtLastEvent) {
       std::cout << "(0) will stop the loop because this is the last event\n";
     } else if(pc.forwardState() == ProcessingController::kUnknownForward) {
       std::cout << "(0) process the next event (if it exists)\n";
     }
 
     if(pc.canRandomAccess()) {
       if(pc.reverseState() == ProcessingController::kEventsBackwardsInFile) {
         std::cout << "(1) process the previous event\n";
       } else if(pc.reverseState() == ProcessingController::kPreviousFileExists) {
         std::cout << "(1) process the previous event if there are any (at first event in the open file. there are previous files)\n";
       } else if(pc.reverseState() == ProcessingController::kAtFirstEvent) {
         std::cout << "(1) will stop the loop because this is the first event\n";
       }
 
       std::cout << "(2) process a specific event\n";
     }
 
     std::cout << "(3) stop loop\n";
     std::cout << "(4) stop process" << std::endl;
     long long int x;
 
     bool inputFailed = false;
     do {
       inputFailed = false;
       if(!(std::cin >> x) || x < 0 || x > 4) {
         inputFailed = true;
         std::cin.clear();
         std::cin.ignore(10000, '\n');
         std::cout << "Please enter numeric characters only. The value must be in the range 0 to 4 (inclusive). Please try again." << std::endl;
       }
       if(!pc.canRandomAccess() && (x == 1 || x == 2)) {
         inputFailed = true;
         std::cout << "The source cannot do random access. 1 and 2 are illegal values. Please try again." << std::endl;
       }
     } while(inputFailed);
 
     shouldStopLoop_ = false;
     shouldStopProcess_ = false;
     if(x == 0) {
       pc.setTransitionToNextEvent();
     } else if(x == 1) {
       pc.setTransitionToPreviousEvent();
     } else if(x == 2) {
       std::cout << "Which run?" << std::endl;
       do {
         inputFailed = false;
         if(!(std::cin >> x)) {
           inputFailed = true;
           std::cin.clear();
           std::cin.ignore(10000, '\n');
           std::cout << "Please enter numeric characters only. Please try again." << std::endl;
         }
       } while(inputFailed);
       RunNumber_t run = x;
       std::cout << "Which luminosity block?" << std::endl;
       do {
         inputFailed = false;
         if(!(std::cin >> x)) {
           inputFailed = true;
           std::cin.clear();
           std::cin.ignore(10000, '\n');
           std::cout << "Please enter numeric characters only. Please try again." << std::endl;
         }
       } while(inputFailed);
       LuminosityBlockNumber_t lumi = x;
       std::cout << "Which event?" << std::endl;
       do {
         inputFailed = false;
         if(!(std::cin >> x)) {
           inputFailed = true;
           std::cin.clear();
           std::cin.ignore(10000, '\n');
           std::cout << "Please enter numeric characters only. Please try again." << std::endl;
         }
       } while(inputFailed);
       EventNumber_t ev = x;
       pc.setTransitionToEvent(EventID(run, lumi, ev));
     } else if(x == 3) {
       pc.setTransitionToNextEvent();
       shouldStopLoop_ = true;
     } else if(x == 4) {
       pc.setTransitionToNextEvent();
       shouldStopLoop_ = true;
       shouldStopProcess_ = true;
     }
     return shouldStopLoop_ ? kStop : kContinue;
   }

EDLooperBase::Status edm::NavigateEventsLooper::endOfLoop	(	EventSetup const &	,
		unsigned int	iCounter
	)

overridevirtual

Called after the system has finished one loop over the events. Thar argument is a count of how many loops have been processed before this loo. For the first time through the events the argument will be 0.

Implements edm::EDLooperBase.

Definition at line 166 of file NavigateEventsLooper.cc.

References countLoops_, gather_cfg::cout, edm::EDLooperBase::kContinue, edm::EDLooperBase::kStop, maxLoops_, and shouldStopProcess_.

                                                                    {
     std::cout << "Ending loop" << std::endl;
     if(shouldStopProcess_) return kStop;
     ++countLoops_;
     return(maxLoops_ < 0 || countLoops_ < maxLoops_) ? kContinue : kStop;
   }

NavigateEventsLooper const& edm::NavigateEventsLooper::operator= ( NavigateEventsLooper const & )

private

void edm::NavigateEventsLooper::startingNewLoop ( unsigned int int )

overridevirtual

Called before system starts to loop over the events. The argument is a count of how many loops have been processed. For the first time through the events the argument will be 0.

Implements edm::EDLooperBase.

Definition at line 60 of file NavigateEventsLooper.cc.

60 {

61 }

Member Data Documentation

int edm::NavigateEventsLooper::countLoops_

private

Definition at line 44 of file NavigateEventsLooper.cc.

Referenced by endOfLoop().

int edm::NavigateEventsLooper::maxLoops_

private

Definition at line 43 of file NavigateEventsLooper.cc.

Referenced by endOfLoop().

bool edm::NavigateEventsLooper::shouldStopLoop_

private

Definition at line 45 of file NavigateEventsLooper.cc.

Referenced by duringLoop().

bool edm::NavigateEventsLooper::shouldStopProcess_

private

Definition at line 46 of file NavigateEventsLooper.cc.

Referenced by duringLoop(), and endOfLoop().

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation