SiStripEventSummary Class Reference

#include <SiStripEventSummary.h>

Public Member Functions
const uint16_t &	apveAddress () const
void	apveAddress (uint16_t &addr)
const sistrip::ApvReadoutMode &	apvReadoutMode () const
const uint32_t &	binNumber () const
const uint32_t &	bx () const
void	bx (const uint32_t &)
const uint32_t &	calChan () const
const uint32_t &	calSel () const
void	commissioningInfo (const uint32_t *const buffer, const uint32_t &event)
void	commissioningInfo (const uint32_t &daq_register1, const uint32_t &daq_register2)
const uint32_t &	dcuId () const
const uint32_t &	deviceId () const
const uint32_t &	event () const
void	event (const uint32_t &)
const sistrip::FedReadoutMode &	fedReadoutMode () const
void	fedReadoutMode (const uint16_t &)
const uint32_t &	isha () const
bool	isSet () const
const uint32_t &	latency () const
const uint32_t &	layerScanned () const
const uint32_t &	lldBias () const
const uint32_t &	lldGain () const
const uint32_t &	nApvsErrors () const
void	nApvsErrors (uint32_t &napvs_with_errors)
const uint32_t &	nApvsInSync () const
void	nApvsInSync (uint32_t &napvs_in_sync)
const uint32_t &	nApvsOutOfSync () const
void	nApvsOutOfSync (uint32_t &napvs_out_of_sync)
bool	nullParams () const
const std::vector< uint32_t > &	params () const
const uint32_t &	pllCoarse () const
const uint32_t &	pllFine () const
const uint32_t &	processId () const
const uint32_t &	processIp () const
const sistrip::RunType &	runType () const
	SiStripEventSummary ()
uint16_t	triggerFed () const
void	triggerFed (const int16_t &)
const uint32_t &	ttcrx () const
bool	valid () const
const uint32_t &	vfs () const
const uint32_t &	vpsp () const
const uint32_t &	vpspCcuChan () const
	~SiStripEventSummary ()

Private Attributes
uint16_t	apveAddress_
sistrip::ApvReadoutMode	apvReadoutMode_
uint32_t	bx_
uint32_t	event_
sistrip::FedReadoutMode	fedReadoutMode_
uint32_t	nApvsErrors_
uint32_t	nApvsInSync_
uint32_t	nApvsOutOfSync_
uint32_t	nDataSenders_
std::vector< uint32_t >	params_
sistrip::RunType	runType_
uint32_t	spillNumber_
uint16_t	triggerFed_
bool	valid_

Detailed Description

Definition at line 22 of file SiStripEventSummary.h.

Constructor & Destructor Documentation

SiStripEventSummary::SiStripEventSummary

(

)

Default constructor.

Definition at line 12 of file SiStripEventSummary.cc.

                                         : 
  valid_(true),
  triggerFed_(0),
  runType_(sistrip::UNDEFINED_RUN_TYPE), 
  event_(0), 
  bx_(0),
  spillNumber_(0),
  nDataSenders_(0),
  fedReadoutMode_(sistrip::UNDEFINED_FED_READOUT_MODE),
  apvReadoutMode_(sistrip::UNDEFINED_APV_READOUT_MODE),
  apveAddress_(0),
  nApvsInSync_(0),
  nApvsOutOfSync_(0),
  nApvsErrors_(0),
  params_(5,0)
{;}

SiStripEventSummary::~SiStripEventSummary ( )

inline

Default destructor.

Definition at line 32 of file SiStripEventSummary.h.

{;}

Member Function Documentation

const uint16_t & SiStripEventSummary::apveAddress ( ) const

inline

Returns APVE golden pipeline address.

Definition at line 232 of file SiStripEventSummary.h.

References apveAddress_.

{ return apveAddress_; }

void SiStripEventSummary::apveAddress ( uint16_t &  addr )

inline

Definition at line 262 of file SiStripEventSummary.h.

References apveAddress_.

{ apveAddress_ = addr; }

const sistrip::ApvReadoutMode & SiStripEventSummary::apvReadoutMode ( ) const

inline

Returns APV readout mode.

Definition at line 230 of file SiStripEventSummary.h.

References apvReadoutMode_.

Referenced by operator<<().

{ return apvReadoutMode_; }

const uint32_t & SiStripEventSummary::binNumber ( ) const

inline

Returns bin number for very fast connection.

Definition at line 239 of file SiStripEventSummary.h.

References params_.

Referenced by FastFedCablingTask::fill().

{ return params_[0]; }

const uint32_t & SiStripEventSummary::bx ( ) const

inline

Returns bunch crossing number.

Definition at line 227 of file SiStripEventSummary.h.

References bx_.

Referenced by bx(), operator<<(), and sistrip::RawToDigiUnpacker::triggerFed().

{ return bx_; }

void SiStripEventSummary::bx ( const uint32_t &  bx )

inline

Sets bunch crossing number.

Definition at line 260 of file SiStripEventSummary.h.

References bx(), and bx_.

{ bx_ = bx; }

const uint32_t & SiStripEventSummary::calChan ( ) const

inline

Returns APV calibration channels (CDRV).

Definition at line 243 of file SiStripEventSummary.h.

References params_.

Referenced by CalibrationScanTask::fill(), and CalibrationTask::fill().

{ return params_[1]; }

const uint32_t & SiStripEventSummary::calSel ( ) const

inline

Returns APV calibration timing (CSEL).

Definition at line 244 of file SiStripEventSummary.h.

References params_.

Referenced by CalibrationScanTask::fill(), and CalibrationTask::fill().

{ return params_[2]; }

void SiStripEventSummary::commissioningInfo	(	const uint32_t *const	buffer,
		const uint32_t &	event
	)

Sets commissioning-related information.

Definition at line 31 of file SiStripEventSummary.cc.

References sistrip::APV_LATENCY, sistrip::APV_TIMING, sistrip::CALIBRATION, sistrip::CALIBRATION_DECO, sistrip::CALIBRATION_SCAN, sistrip::CALIBRATION_SCAN_DECO, sistrip::DAQ_SCOPE_MODE, TauDecayModes::dec, sistrip::FAST_CABLING, sistrip::FED_CABLING, sistrip::FED_PROC_RAW, sistrip::FED_SCOPE_MODE, sistrip::FED_TIMING, sistrip::FED_VIRGIN_RAW, sistrip::FED_ZERO_SUPPR, sistrip::FED_ZERO_SUPPR_LITE, fedReadoutMode_, sistrip::FINE_DELAY, sistrip::FINE_DELAY_PLL, sistrip::FINE_DELAY_TTC, newFWLiteAna::found, cuy::ii, edm::isDebugEnabled(), relval_steps::key, LogTrace, sistrip::mlDigis_, nDataSenders_, sistrip::OPTO_SCAN, params_, sistrip::PEDESTALS, sistrip::PHYSICS, sistrip::PHYSICS_ZS, sistrip::QUITE_FAST_CABLING, DTTTrigCorrFirst::run, SiStripEnumsAndStrings::runType(), runType_, spillNumber_, contentValuesCheck::ss, sistrip::UNKNOWN_FED_READOUT_MODE, and sistrip::VPSP_SCAN.

Referenced by sistrip::RawToDigiUnpacker::triggerFed(), and sistrip::RawToDigiUnpacker::updateEventSummary().

                                                 {
  
  // Set RunType
  uint16_t run = static_cast<uint16_t>( buffer[10] & 0xFFFF );
  runType_ = SiStripEnumsAndStrings::runType(run);

  // Set spill number
  spillNumber_ = buffer[0];

  // Set number of DataSenders
  nDataSenders_ = buffer[20];

  // Set FED readout mode
  if      ( buffer[15] == 0 ) { fedReadoutMode_ = sistrip::FED_SCOPE_MODE; }
  else if ( buffer[15] == 1 ) { fedReadoutMode_ = sistrip::FED_VIRGIN_RAW; }
  else if ( buffer[15] == 2 ) { fedReadoutMode_ = sistrip::FED_PROC_RAW; }
  else if ( buffer[15] == 3 ) { fedReadoutMode_ = sistrip::FED_ZERO_SUPPR; }
  else if ( buffer[15] == 4 ) { fedReadoutMode_ = sistrip::FED_ZERO_SUPPR_LITE; }
  else { fedReadoutMode_ = sistrip::UNKNOWN_FED_READOUT_MODE; }
  
  // Set hardware parameters
  if ( runType_ == sistrip::CALIBRATION ||
       runType_ == sistrip::CALIBRATION_DECO ||
       runType_ == sistrip::CALIBRATION_SCAN ||
       runType_ == sistrip::CALIBRATION_SCAN_DECO ||
       runType_ == sistrip::APV_LATENCY ) { 

    params_[0] = buffer[11]; // latency
    params_[1] = buffer[12]; // cal_chan
    params_[2] = buffer[13]; // cal_sel
    params_[3] = buffer[15]; // isha
    params_[4] = buffer[16]; // vfs

  } else if ( runType_ == sistrip::OPTO_SCAN ) { 

    params_[0] = buffer[11]; // opto gain
    params_[1] = buffer[12]; // opto bias

  } else if ( runType_ == sistrip::APV_TIMING ||
          runType_ == sistrip::FED_TIMING ) {
    params_[0] = buffer[11]; // pll coarse delay
    params_[1] = buffer[12]; // pll fine delay
    params_[2] = buffer[13]; // ttcrx delay
  } else if ( runType_ == sistrip::FINE_DELAY || //@@ layer
          runType_ == sistrip::FINE_DELAY_PLL ||
          runType_ == sistrip::FINE_DELAY_TTC ) { 
    params_[0] = buffer[11]; // pll coarse delay
    params_[1] = buffer[12]; // pll fine delay
    params_[2] = buffer[13]; // ttcrx delay
    params_[3] = buffer[14]; // layer (private format: DDSSLLLL, det, side, layer)

  } else if ( runType_ == sistrip::FAST_CABLING ) { 

    params_[0] = buffer[11]; // bin number
    params_[1] = buffer[12]; // fec instance
    params_[2] = buffer[13]; // fec ip
    params_[3] = buffer[14]; // dcu hard id 

  } else if ( runType_ == sistrip::FED_CABLING ||
          runType_ == sistrip::QUITE_FAST_CABLING ) { 

    if ( runType_ == sistrip::QUITE_FAST_CABLING ) { 

      uint16_t ii = 0;
      bool found = false;
      while ( !found && ii < 20 ) {
    uint32_t dcu = buffer[21+3*ii];
    uint32_t key = buffer[21+3*ii+1];
    uint32_t evt = buffer[21+3*ii+2];
    if ( evt == event ) {
      params_[0] = key; // device id
      params_[1] = 0;   // process id
      params_[2] = 0;   // process ip
      params_[3] = dcu; // dcu hard id
      found = true;
    } 
    ii++;
      }
      if ( !found ) { 
    if ( edm::isDebugEnabled() ) {
      std::stringstream ss;
      ss << "[SiStripEventSummary::" << __func__ << "]"
         << " Did not find DeviceId/DCUid for event " 
         << event << "!";
      edm::LogWarning(mlDigis_) << ss.str();
    }
    params_[0] = 0; 
    params_[1] = 0; 
    params_[2] = 0;
    params_[3] = 0;
      } else {
    if ( edm::isDebugEnabled() ) {
      std::stringstream ss;
      ss << "[SiStripEventSummary::" << __func__ << "]"
         << " Found DeviceId/DCUid for event " 
         << event << ": 0x" 
         << std::hex << std::setw(8) << std::setfill('0') << params_[0] << std::dec
         << "/0x"
         << std::hex << std::setw(8) << std::setfill('0') << params_[3] << std::dec;
      LogTrace(mlDigis_) << ss.str();
    }
      }

    } else {

      params_[0] = buffer[11]; // device id
      params_[1] = buffer[12]; // process id
      params_[2] = buffer[13]; // process ip
      params_[3] = buffer[14]; // dcu hard id

    }

  } else if ( runType_ == sistrip::VPSP_SCAN ) { 

    params_[0] = buffer[11]; // vpsp value
    params_[1] = buffer[12]; // ccu channel

  } else if ( runType_ == sistrip::DAQ_SCOPE_MODE ) { 

    // nothing interesting!

  } else if (  runType_ == sistrip::PHYSICS ||
           runType_ == sistrip::PHYSICS_ZS ||
           runType_ == sistrip::PEDESTALS ) { 

    //@@ do anything?...

  } else { 
    
    if ( edm::isDebugEnabled() ) {
      edm::LogWarning(mlDigis_)
    << "[SiStripEventSummary::" << __func__ << "]"
    << " Unexpected commissioning task: "
    << runType_;
    }

  }

}

void SiStripEventSummary::commissioningInfo	(	const uint32_t &	daq_register1,
		const uint32_t &	daq_register2
	)

Sets DAQ register information.

Definition at line 177 of file SiStripEventSummary.cc.

References sistrip::APV_LATENCY, sistrip::APV_TIMING, sistrip::CALIBRATION, sistrip::CALIBRATION_DECO, sistrip::CALIBRATION_SCAN, sistrip::DAQ_SCOPE_MODE, TauDecayModes::dec, sistrip::FAST_CABLING, sistrip::FED_CABLING, sistrip::FED_TIMING, sistrip::FINE_DELAY, sistrip::FINE_DELAY_PLL, sistrip::FINE_DELAY_TTC, sistrip::invalid32_, edm::isDebugEnabled(), sistrip::mlDigis_, sistrip::OPTO_SCAN, params_, sistrip::PEDESTALS, sistrip::PHYSICS, sistrip::PHYSICS_ZS, sistrip::QUITE_FAST_CABLING, DTTTrigCorrFirst::run, SiStripEnumsAndStrings::runType(), runType_, groupFilesInBlocks::temp, valid_, and sistrip::VPSP_SCAN.

                                                {
  
  // Extract if commissioning info are valid or not 
  uint16_t temp = static_cast<uint16_t>( (daq1>>8)&0x3 );
  if      ( temp == uint16_t(1) ) { valid_ = true; }
  else if ( temp == uint16_t(2) ) { valid_ = false; }
  else if ( temp == uint16_t(3) && 
        daq1 == sistrip::invalid32_ ) {
    if ( edm::isDebugEnabled() ) {
      edm::LogWarning(mlDigis_)
    << "[SiStripEventSummary::" << __func__ << "]"
    << " DAQ register contents set to invalid: 0x"
    << std::hex 
    << std::setw(8) << std::setfill('0') << daq1 
    << std::dec;
    }
    valid_ = false;
  } else {
    if ( edm::isDebugEnabled() ) {
      edm::LogWarning(mlDigis_)
    << "[SiStripEventSummary::" << __func__ << "]"
    << " Unexpected bit pattern set in DAQ1: 0x"
    << std::hex 
    << std::setw(8) << std::setfill('0') << daq1 
    << std::dec;
    }
    valid_ = false;
  }
  
  // Set RunType
  uint16_t run = static_cast<uint16_t>( daq1&0xFF );
  runType_ = SiStripEnumsAndStrings::runType(run);
  
  // Set hardware parameters
  if        ( runType_ == sistrip::PHYSICS ) { 
  } else if ( runType_ == sistrip::PHYSICS_ZS ) { 
  } else if ( runType_ == sistrip::PEDESTALS ) { 
  } else if ( runType_ == sistrip::DAQ_SCOPE_MODE ) { 
  } else if ( runType_ == sistrip::CALIBRATION ) { 
  } else if ( runType_ == sistrip::CALIBRATION_DECO ) { 
    params_[0] = (daq2>>8)&0xFF; // latency
    params_[1] = (daq2>>4)&0x0F; // cal_chan
    params_[2] = (daq2>>0)&0x0F; // cal_sel
  } else if ( runType_ == sistrip::CALIBRATION_SCAN ) { 
    params_[0] = (daq2>>8)&0xFF; // latency
    params_[1] = (daq2>>4)&0x0F; // cal_chan
    params_[2] = (daq2>>0)&0x0F; // cal_sel
  } else if ( runType_ == sistrip::OPTO_SCAN ) { 
    params_[0] = (daq2>>8)&0xFF; // opto gain
    params_[1] = (daq2>>0)&0xFF; // opto bias
  } else if ( runType_ == sistrip::APV_TIMING ) { 
    params_[1] = (daq2>>0)&0xFF; // pll fine delay
  } else if ( runType_ == sistrip::APV_LATENCY ) { 
    params_[0] = (daq2>>0)&0xFF; // latency
  } else if ( runType_ == sistrip::FINE_DELAY_PLL ) { 
  } else if ( runType_ == sistrip::FINE_DELAY_TTC ) { 
  } else if ( runType_ == sistrip::FINE_DELAY ) { //@@ layer
    params_[2] = (daq2>>0 )&0xFFFF; // ttcrx delay
    params_[0] = params_[2]/25;   // pll coarse delay
    params_[1] = uint32_t((params_[2]%25)*24./25.); // pll fine delay
    params_[3] = (daq2>>0)&0xFFFF0000; // layer (private format: DDSSLLLL (det, side, layer)
  } else if ( runType_ == sistrip::FED_TIMING ) { 
    params_[1] = (daq2>>0)&0xFF; // pll fine delay
  } else if ( runType_ == sistrip::VPSP_SCAN ) { 
    params_[0] = (daq2>>8)&0xFF; // vpsp value
    params_[1] = (daq2>>0)&0xFF; // ccu channel
  } else if ( runType_ == sistrip::FED_CABLING ) { 
  } else if ( runType_ == sistrip::QUITE_FAST_CABLING ) { 
  } else if ( runType_ == sistrip::FAST_CABLING ) { 
    params_[0] = (daq2>>0)&0xFF; // key
  } else { 
    if ( edm::isDebugEnabled() ) {
      edm::LogWarning(mlDigis_)
    << "[SiStripEventSummary::" << __func__ << "]"
    << " Unexpected commissioning task: "
    << runType_;
    }
  }

}

const uint32_t & SiStripEventSummary::dcuId ( ) const

inline

Returns DCU id.

Definition at line 255 of file SiStripEventSummary.h.

References params_.

Referenced by SiStripCommissioningSource::fillCablingHistos().

{ return params_[3]; }

const uint32_t & SiStripEventSummary::deviceId ( ) const

inline

Returns device id.

Definition at line 252 of file SiStripEventSummary.h.

References params_.

Referenced by SiStripCommissioningSource::fillCablingHistos().

{ return params_[0]; }

const uint32_t & SiStripEventSummary::event ( ) const

inline

Returns event number.

Definition at line 226 of file SiStripEventSummary.h.

References event_.

Referenced by Types.EventID::cppID(), event(), PedsFullNoiseTask::fill(), core.AutoHandle.AutoHandle::Load(), operator<<(), core.AutoHandle.AutoHandle::product(), and sistrip::RawToDigiUnpacker::triggerFed().

{ return event_; }

void SiStripEventSummary::event ( const uint32_t &  event )

inline

Sets event number.

Definition at line 259 of file SiStripEventSummary.h.

References event(), and event_.

Referenced by Types.EventID::cppID(), core.AutoHandle.AutoHandle::Load(), and core.AutoHandle.AutoHandle::product().

{ event_ = event; }

const sistrip::FedReadoutMode & SiStripEventSummary::fedReadoutMode ( ) const

inline

Returns FED readout mode.

Definition at line 229 of file SiStripEventSummary.h.

References fedReadoutMode_.

Referenced by operator<<(), and sistrip::RawToDigiUnpacker::updateEventSummary().

{ return fedReadoutMode_; }

void SiStripEventSummary::fedReadoutMode

(

const uint16_t &

mode

)

Sets FED readout mode.

Definition at line 261 of file SiStripEventSummary.cc.

References sistrip::FED_PROC_RAW, sistrip::FED_SCOPE_MODE, sistrip::FED_VIRGIN_RAW, sistrip::FED_ZERO_SUPPR, sistrip::FED_ZERO_SUPPR_LITE, fedReadoutMode_, and sistrip::UNKNOWN_FED_READOUT_MODE.

                                                               {
  if      ( mode ==  1 ) { fedReadoutMode_ = sistrip::FED_SCOPE_MODE; }
  else if ( mode ==  2 ) { fedReadoutMode_ = sistrip::FED_VIRGIN_RAW; }
  else if ( mode ==  6 ) { fedReadoutMode_ = sistrip::FED_PROC_RAW; }
  else if ( mode == 10 ) { fedReadoutMode_ = sistrip::FED_ZERO_SUPPR; }
  else if ( mode == 12 ) { fedReadoutMode_ = sistrip::FED_ZERO_SUPPR_LITE; }
  else { fedReadoutMode_ = sistrip::UNKNOWN_FED_READOUT_MODE; }
}

const uint32_t & SiStripEventSummary::isha ( ) const

inline

Returns APV ISHA.

Definition at line 245 of file SiStripEventSummary.h.

References params_.

Referenced by CalibrationScanTask::fill().

{ return params_[3]; }

bool SiStripEventSummary::isSet ( ) const

inline

Flag to identify if commissioning info already set.

Definition at line 223 of file SiStripEventSummary.h.

References runType_, and sistrip::UNDEFINED_RUN_TYPE.

Referenced by sistrip::RawToDigiUnpacker::createDigis(), operator<<(), sistrip::RawToDigiUnpacker::triggerFed(), and sistrip::RawToDigiUnpacker::updateEventSummary().

{ return ( /* triggerFed_ > 0 && */ runType_ != sistrip::UNDEFINED_RUN_TYPE ); }  

const uint32_t & SiStripEventSummary::latency ( ) const

inline

Returns APV latency setting.

Definition at line 242 of file SiStripEventSummary.h.

References params_.

Referenced by CalibrationScanTask::fill(), and CalibrationTask::fill().

{ return params_[0]; }

const uint32_t & SiStripEventSummary::layerScanned ( ) const

inline

Returns the layer mask for fine delay runs

Definition at line 256 of file SiStripEventSummary.h.

References params_.

{ return params_[3]; }

const uint32_t & SiStripEventSummary::lldBias ( ) const

inline

Returns LLD bias setting.

Definition at line 251 of file SiStripEventSummary.h.

References params_.

Referenced by OptoScanTask::fill().

{ return params_[1]; }

const uint32_t & SiStripEventSummary::lldGain ( ) const

inline

Returns LLD gain setting.

Definition at line 250 of file SiStripEventSummary.h.

References params_.

Referenced by OptoScanTask::fill().

{ return params_[0]; }

const uint32_t & SiStripEventSummary::nApvsErrors ( ) const

inline

Returns number of APVs with error flags set.

Definition at line 235 of file SiStripEventSummary.h.

References nApvsErrors_.

{ return nApvsErrors_; }

void SiStripEventSummary::nApvsErrors ( uint32_t &  napvs_with_errors )

inline

Definition at line 265 of file SiStripEventSummary.h.

References nApvsErrors_.

{ nApvsErrors_ = napvs_with_errors; }

const uint32_t & SiStripEventSummary::nApvsInSync ( ) const

inline

Returns number of APVs that are synchronized.

Definition at line 233 of file SiStripEventSummary.h.

References nApvsInSync_.

{ return nApvsInSync_; }

void SiStripEventSummary::nApvsInSync ( uint32_t &  napvs_in_sync )

inline

Definition at line 263 of file SiStripEventSummary.h.

References nApvsInSync_.

{ nApvsInSync_ = napvs_in_sync; }

const uint32_t & SiStripEventSummary::nApvsOutOfSync ( ) const

inline

Returns number of APVs that are not synchronized.

Definition at line 234 of file SiStripEventSummary.h.

References nApvsOutOfSync_.

{ return nApvsOutOfSync_; }

void SiStripEventSummary::nApvsOutOfSync ( uint32_t &  napvs_out_of_sync )

inline

Definition at line 264 of file SiStripEventSummary.h.

References nApvsOutOfSync_.

{ nApvsOutOfSync_ = napvs_out_of_sync; }

bool SiStripEventSummary::nullParams ( ) const

inline

Indicates whether all params are null or not.

Definition at line 237 of file SiStripEventSummary.h.

References params_.

{ return ( !params_[0] && !params_[1] && !params_[2] && !params_[3] ); } 

const std::vector< uint32_t > & SiStripEventSummary::params ( ) const

inline

Returns values of all params.

Definition at line 238 of file SiStripEventSummary.h.

References params_.

Referenced by operator<<().

{ return params_; } 

const uint32_t & SiStripEventSummary::pllCoarse ( ) const

inline

Returns PLL coarse delay setting.

Definition at line 240 of file SiStripEventSummary.h.

References params_.

{ return params_[0]; }

const uint32_t & SiStripEventSummary::pllFine ( ) const

inline

Returns PLL fine delay setting.

Definition at line 241 of file SiStripEventSummary.h.

References params_.

Referenced by ApvTimingTask::fill(), and FedTimingTask::fill().

{ return params_[1]; }

const uint32_t & SiStripEventSummary::processId ( ) const

inline

Returns process id.

Definition at line 253 of file SiStripEventSummary.h.

References params_.

{ return params_[1]; }

const uint32_t & SiStripEventSummary::processIp ( ) const

inline

Returns process IP address.

Definition at line 254 of file SiStripEventSummary.h.

References params_.

{ return params_[2]; }

const sistrip::RunType & SiStripEventSummary::runType ( ) const

inline

Returns run type.

Definition at line 225 of file SiStripEventSummary.h.

References runType_.

Referenced by sistrip::RawToDigiUnpacker::createDigis(), SiStripCommissioningSource::createTask(), and operator<<().

{ return runType_; }

uint16_t SiStripEventSummary::triggerFed ( ) const

inline

Identifier of trigger FED (null value means not found).

Definition at line 222 of file SiStripEventSummary.h.

References triggerFed_.

Referenced by operator<<(), sistrip::RawToDigiUnpacker::triggerFed(), and sistrip::RawToDigiUnpacker::updateEventSummary().

{ return triggerFed_; }

void SiStripEventSummary::triggerFed ( const int16_t &  fed )

inline

Sets trigger FED number.

Definition at line 258 of file SiStripEventSummary.h.

References triggerFed_.

{ fed < 0 ? triggerFed_ = 0 : triggerFed_ = fed; }

const uint32_t & SiStripEventSummary::ttcrx ( ) const

inline

Returns TTCrx delay setting.

Definition at line 247 of file SiStripEventSummary.h.

References params_.

{ return params_[2]; }

bool SiStripEventSummary::valid ( ) const

inline

Identifies if commissioning info is valid or not (when using global trigger to understand if HW config is being changed).

Definition at line 221 of file SiStripEventSummary.h.

References valid_.

Referenced by sistrip::RawToDigiUnpacker::createDigis(), and operator<<().

{ return valid_; }

const uint32_t & SiStripEventSummary::vfs ( ) const

inline

Returns APV VFS.

Definition at line 246 of file SiStripEventSummary.h.

References params_.

Referenced by CalibrationScanTask::fill().

{ return params_[4]; }

const uint32_t & SiStripEventSummary::vpsp ( ) const

inline

Returns VPSP setting.

Definition at line 248 of file SiStripEventSummary.h.

References params_.

{ return params_[0]; }

const uint32_t & SiStripEventSummary::vpspCcuChan ( ) const

inline

Returns CCU channel of module being tuned for VPSP.

Definition at line 249 of file SiStripEventSummary.h.

References params_.

{ return params_[1]; }

Member Data Documentation

uint16_t SiStripEventSummary::apveAddress_

private

APVE golden pipeline address.

Definition at line 203 of file SiStripEventSummary.h.

Referenced by apveAddress().

sistrip::ApvReadoutMode SiStripEventSummary::apvReadoutMode_

private

APV readout mode.

Definition at line 200 of file SiStripEventSummary.h.

Referenced by apvReadoutMode().

uint32_t SiStripEventSummary::bx_

private

Bunch crossing number.

Definition at line 186 of file SiStripEventSummary.h.

Referenced by bx().

uint32_t SiStripEventSummary::event_

private

Event number.

Definition at line 183 of file SiStripEventSummary.h.

Referenced by event().

sistrip::FedReadoutMode SiStripEventSummary::fedReadoutMode_

private

FED readout mode.

Definition at line 197 of file SiStripEventSummary.h.

Referenced by commissioningInfo(), and fedReadoutMode().

uint32_t SiStripEventSummary::nApvsErrors_

private

Number of APVs with error flags set.

Definition at line 212 of file SiStripEventSummary.h.

Referenced by nApvsErrors().

uint32_t SiStripEventSummary::nApvsInSync_

private

Number of APVs that are synchronized.

Definition at line 206 of file SiStripEventSummary.h.

Referenced by nApvsInSync().

uint32_t SiStripEventSummary::nApvsOutOfSync_

private

Number of APVs that are not synchronized.

Definition at line 209 of file SiStripEventSummary.h.

Referenced by nApvsOutOfSync().

uint32_t SiStripEventSummary::nDataSenders_

private

Number of DataSenders (c.f. ReadoutUnits).

Definition at line 192 of file SiStripEventSummary.h.

Referenced by commissioningInfo().

std::vector<uint32_t> SiStripEventSummary::params_

private

Parameters related to commissioning analysis.

Definition at line 215 of file SiStripEventSummary.h.

Referenced by binNumber(), calChan(), calSel(), commissioningInfo(), dcuId(), deviceId(), isha(), latency(), layerScanned(), lldBias(), lldGain(), nullParams(), params(), pllCoarse(), pllFine(), processId(), processIp(), ttcrx(), vfs(), vpsp(), and vpspCcuChan().

sistrip::RunType SiStripEventSummary::runType_

private

Run type.

Definition at line 180 of file SiStripEventSummary.h.

Referenced by commissioningInfo(), isSet(), and runType().

uint32_t SiStripEventSummary::spillNumber_

private

Spill number.

Definition at line 189 of file SiStripEventSummary.h.

Referenced by commissioningInfo().

uint16_t SiStripEventSummary::triggerFed_

private

Definition at line 174 of file SiStripEventSummary.h.

Referenced by triggerFed().

bool SiStripEventSummary::valid_

private

Flag to signify if trigger FED information is valid.

Definition at line 171 of file SiStripEventSummary.h.

Referenced by commissioningInfo(), and valid().