#include <DTLinearDriftFromDBAlgo.h>

Inheritance diagram for DTLinearDriftFromDBAlgo:

Public Member Functions
virtual bool	compute (const DTLayer *layer, const DTDigi &digi, LocalPoint &leftPoint, LocalPoint &rightPoint, LocalError &error) const

virtual bool	compute (const DTLayer *layer, const DTRecHit1D &recHit1D, const float &angle, DTRecHit1D &newHit1D) const

virtual bool	compute (const DTLayer *layer, const DTRecHit1D &recHit1D, const float &angle, const GlobalPoint &globPos, DTRecHit1D &newHit1D) const

	DTLinearDriftFromDBAlgo (const edm::ParameterSet &config)
	Constructor. More...

virtual void	setES (const edm::EventSetup &setup)
	Pass the Event Setup to the algo at each event. More...

virtual	~DTLinearDriftFromDBAlgo ()
	Destructor. More...

Public Member Functions inherited from DTRecHitBaseAlgo
	DTRecHitBaseAlgo (const edm::ParameterSet &config)
	Constructor. More...

virtual edm::OwnVector < DTRecHit1DPair >	reconstruct (const DTLayer *layer, const DTLayerId &layerId, const DTDigiCollection::Range &digiRange)
	Build all hits in the range associated to the layerId, at the 1st step. More...

virtual	~DTRecHitBaseAlgo ()
	Destructor. More...

Private Member Functions
virtual bool	compute (const DTLayer *layer, const DTWireId &wireId, const float digiTime, const GlobalPoint &globPos, LocalPoint &leftPoint, LocalPoint &rightPoint, LocalError &error, int step) const

virtual bool	compute (const DTLayer *layer, const DTWireId &wireId, const float digiTime, const GlobalPoint &globPos, DTRecHit1D &newHit1D, int step) const

Private Attributes
const bool	debug

const bool	doVdriftCorr

const MagneticField *	field

const float	maxTime

const float	minTime

const DTMtime *	mTimeMap

int	nominalB

const bool	stepTwoFromDigi

const DTRecoUncertainties *	uncertMap

bool	useUncertDB

Additional Inherited Members
Protected Attributes inherited from DTRecHitBaseAlgo
DTTTrigBaseSync *	theSync

Detailed Description

Concrete implementation of DTRecHitBaseAlgo. Compute drift distance using constant drift velocity read from database.

Author: S.Bolognesi - INFN Torino

Definition at line 18 of file DTLinearDriftFromDBAlgo.h.

Constructor & Destructor Documentation

DTLinearDriftFromDBAlgo::DTLinearDriftFromDBAlgo ( const edm::ParameterSet & config )

Constructor.

Definition at line 26 of file DTLinearDriftFromDBAlgo.cc.

References gather_cfg::cout, debug, edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), and useUncertDB.

                                                                            :
   DTRecHitBaseAlgo(config),
   mTimeMap(0),
   field(0),
   nominalB(-1),
   minTime(config.getParameter<double>("minTime")),
   maxTime(config.getParameter<double>("maxTime")),
   doVdriftCorr(config.getParameter<bool>("doVdriftCorr")),
   // Option to force going back to digi time at Step 2 
   stepTwoFromDigi(config.getParameter<bool>("stepTwoFromDigi")),
   useUncertDB(false),
   // Set verbose output
   debug(config.getUntrackedParameter<bool>("debug"))
 {
   if(debug)
     cout<<"[DTLinearDriftFromDBAlgo] Constructor called"<<endl;
 
   // Check for compatibility with older configurations
   if (config.existsAs<bool>("useUncertDB")) {
     // Assign hit uncertainties based on new uncertainties DB
     useUncertDB= config.getParameter<bool>("useUncertDB");
   }
 }

DTLinearDriftFromDBAlgo::~DTLinearDriftFromDBAlgo ( )

virtual

Destructor.

Definition at line 52 of file DTLinearDriftFromDBAlgo.cc.

52 {}

Member Function Documentation

bool DTLinearDriftFromDBAlgo::compute	(	const DTLayer *	layer,
		const DTDigi &	digi,
		LocalPoint &	leftPoint,
		LocalPoint &	rightPoint,
		LocalError &	error
	)		const

virtual

First step in computation of Left/Right hits from a Digi. The results are the local position (in DTLayer frame) of the Left and Right hit, and the error (which is common). Returns false on failure. The hit is assumed to be at the wire center.

Implements DTRecHitBaseAlgo.

Definition at line 89 of file DTLinearDriftFromDBAlgo.cc.

References relativeConstraints::error, DTLayer::id(), DTTopology::isWireValid(), DTLayer::specificTopology(), DTDigi::time(), GeomDet::toGlobal(), DTDigi::wire(), and DTTopology::wirePosition().

Referenced by compute().

                                          {
   // Get the wireId
   DTLayerId layerId = layer->id();
   const DTWireId wireId(layerId, digi.wire());
 
   // Get Wire position
   if(!layer->specificTopology().isWireValid(digi.wire())) return false;
   LocalPoint locWirePos(layer->specificTopology().wirePosition(digi.wire()), 0, 0);
   const GlobalPoint globWirePos = layer->toGlobal(locWirePos);
   
   return compute(layer, wireId, digi.time(), globWirePos, leftPoint, rightPoint, error, 1); 
 }

bool DTLinearDriftFromDBAlgo::compute	(	const DTLayer *	layer,
		const DTRecHit1D &	recHit1D,
		const float &	angle,
		DTRecHit1D &	newHit1D
	)		const

virtual

Second step in hit position computation. It is the same as first step since the angular information is not used NOTE: Only position and error of the new hit are modified

Implements DTRecHitBaseAlgo.

Definition at line 109 of file DTLinearDriftFromDBAlgo.cc.

References compute(), DTRecHit1D::digiTime(), DTTopology::isWireValid(), DTRecHit1D::localPosition(), DTRecHit1D::localPositionError(), DTRecHit1D::setPositionAndError(), DTLayer::specificTopology(), stepTwoFromDigi, GeomDet::toGlobal(), DTWireId::wire(), DTRecHit1D::wireId(), and DTTopology::wirePosition().

                                             {
 
   if (!stepTwoFromDigi) {
     newHit1D.setPositionAndError(recHit1D.localPosition(), recHit1D.localPositionError());
     return true;
   }
 
   const DTWireId wireId = recHit1D.wireId();
   
   // Get Wire position
   if(!layer->specificTopology().isWireValid(wireId.wire())) return false;
   LocalPoint locWirePos(layer->specificTopology().wirePosition(wireId.wire()), 0, 0);
   const GlobalPoint globWirePos = layer->toGlobal(locWirePos);
 
   return compute(layer, wireId, recHit1D.digiTime(), globWirePos, newHit1D, 2);
 
 }

bool DTLinearDriftFromDBAlgo::compute	(	const DTLayer *	layer,
		const DTRecHit1D &	recHit1D,
		const float &	angle,
		const GlobalPoint &	globPos,
		DTRecHit1D &	newHit1D
	)		const

virtual

Third (and final) step in hits position computation. Also the hit position along the wire is available and can be used to correct the drift time for particle TOF and propagation of signal along the wire. NOTE: Only position and error of the new hit are modified

Implements DTRecHitBaseAlgo.

Definition at line 133 of file DTLinearDriftFromDBAlgo.cc.

References compute(), DTRecHit1D::digiTime(), and DTRecHit1D::wireId().

                                             {
   return compute(layer, recHit1D.wireId(), recHit1D.digiTime(), globPos, newHit1D, 3);
 }

bool DTLinearDriftFromDBAlgo::compute	(	const DTLayer *	layer,
		const DTWireId &	wireId,
		const float	digiTime,
		const GlobalPoint &	globPos,
		LocalPoint &	leftPoint,
		LocalPoint &	rightPoint,
		LocalError &	error,
		int	step
	)		const

privatevirtual

cf. http://arxiv.org/PS_cache/arxiv/pdf/0911/0911.4895v2.pdf

Definition at line 144 of file DTLinearDriftFromDBAlgo.cc.

References funct::abs(), DTVelocityUnits::cm_per_ns, gather_cfg::cout, debug, doVdriftCorr, shallow::drift(), DTRecoUncertainties::get(), DTMtime::get(), DTTopology::isWireValid(), maxTime, mTimeMap, nominalB, DTTTrigBaseSync::offset(), DTLayer::specificTopology(), DTChamberId::station(), DTSuperLayerId::superLayer(), DTLayerId::superlayerId(), DTRecHitBaseAlgo::theSync, GeomDet::toLocal(), uncertMap, useUncertDB, DTChamberId::wheel(), DTWireId::wire(), DTTopology::wirePosition(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                 {
   // Subtract the offset to the digi time accordingly to the DTTTrigBaseSync concrete instance
   float driftTime = digiTime - theSync->offset(layer, wireId, globPos); 
   
   // check for out-of-time
   if (driftTime < minTime || driftTime > maxTime) {
     if (debug) cout << "[DTLinearDriftFromDBAlgo]*** Drift time out of window for in-time hits "
                   << driftTime << endl;
 
     if(step == 1) { //FIXME: protection against failure at 2nd and 3rd steps, must be checked!!!
       // Hits are interpreted as coming from out-of-time pile-up and recHit
       // is ignored.
       return false;
     }
   }
 
   // Small negative times interpreted as hits close to the wire.
   if (driftTime<0.) driftTime=0;
 
   // Read the vDrift and reso for this wire
   float vDrift = 0;
   float hitResolution = 0; 
   // vdrift is cm/ns , resolution is cm
   mTimeMap->get(wireId.superlayerId(),
             vDrift,
             hitResolution,  // Value from vdrift DB; replaced below if useUncertDB card is set
             DTVelocityUnits::cm_per_ns);
 
   if (useUncertDB) {
     // Read the uncertainty from the DB for the given channel and step
     hitResolution = uncertMap->get(wireId, step-1);
   }
   
   //only in step 3
   if(doVdriftCorr && step == 3 && nominalB !=0){
     if (abs(wireId.wheel()) == 2 && 
     wireId.station() == 1 &&
     wireId.superLayer() != 2) {
       // Variation of vdrift along Y due to B field, 
       // vdrift is lower  a negative Y (lower global |Z|)
       const float k_param = 1.2e-04;
       LocalPoint local_pos = layer->toLocal(globPos);
       vDrift = vDrift*(1. - k_param*local_pos.y());
     } 
   }
 
   // Compute the drift distance
   float drift = driftTime * vDrift;
 
   // Get Wire position
   if(!layer->specificTopology().isWireValid(wireId.wire())) return false;
   LocalPoint locWirePos(layer->specificTopology().wirePosition(wireId.wire()), 0, 0);
   //Build the two possible points and the error on the position
   leftPoint  = LocalPoint(locWirePos.x()-drift,
                             locWirePos.y(),
                             locWirePos.z());
   rightPoint = LocalPoint(locWirePos.x()+drift,
                             locWirePos.y(),
                             locWirePos.z());
   error = LocalError(hitResolution*hitResolution,0.,0.);
 
 
   if(debug) {
     cout << "[DTLinearDriftFromDBAlgo] Compute drift distance, for digi at wire: " << wireId << endl
      << "       Step:           " << step << endl
      << "       Digi time:      " << digiTime << endl
      << "       Drift time:     " << driftTime << endl
      << "       Drift distance: " << drift << endl
      << "       Hit Resolution: " << hitResolution << endl
      << "       Left point:     " << leftPoint << endl
      << "       Right point:    " << rightPoint << endl
      << "       Error:          " << error << endl;
    }
   
   return true;
   
 }

bool DTLinearDriftFromDBAlgo::compute	(	const DTLayer *	layer,
		const DTWireId &	wireId,
		const float	digiTime,
		const GlobalPoint &	globPos,
		DTRecHit1D &	newHit1D,
		int	step
	)		const

privatevirtual

Definition at line 232 of file DTLinearDriftFromDBAlgo.cc.

References compute(), relativeConstraints::error, edm::hlt::Exception, DTEnums::Left, DTRecHit1D::localPosition(), DTRecHit1D::lrSide(), DTEnums::Right, DTRecHit1D::setPositionAndError(), PV3DBase< T, PVType, FrameType >::x(), PV3DBase< T, PVType, FrameType >::y(), and PV3DBase< T, PVType, FrameType >::z().

                                 {
   LocalPoint leftPoint;
   LocalPoint rightPoint;
   LocalError error;
 
   if(compute(layer, wireId, digiTime, globPos, leftPoint, rightPoint, error, step)) {
     // Set the position and the error of the rechit which is being updated
     switch(newHit1D.lrSide()) {
     
     case DTEnums::Left:
         {
           // Keep the original y position of newHit1D: for step==3, it's the
           // position along the wire. Needed for rotation alignment
           LocalPoint leftPoint3D(leftPoint.x(), newHit1D.localPosition().y(), leftPoint.z());
           newHit1D.setPositionAndError(leftPoint3D, error);
           break;
         }
     
     case DTEnums::Right:
         {
           // as above: 3d position
           LocalPoint rightPoint3D(rightPoint.x(), newHit1D.localPosition().y(), rightPoint.z());
           newHit1D.setPositionAndError(rightPoint3D, error);
           break;
         }
     
     default:
       throw cms::Exception("InvalidDTCellSide") << "[DTLinearDriftFromDBAlgo] Compute at Step "
                         << step << ", Hit side "
                         << newHit1D.lrSide()
                         << " is invalid!" << endl;
       return false;
     }
       
     return true;
   }else {
     return false;
   }
 }

void DTLinearDriftFromDBAlgo::setES ( const edm::EventSetup & setup )

virtual

Pass the Event Setup to the algo at each event.

Implements DTRecHitBaseAlgo.

Definition at line 56 of file DTLinearDriftFromDBAlgo.cc.

References gather_cfg::cout, debug, field, edm::EventSetup::get(), HLT_ES_cff::magfield, mTimeMap, nominalB, MagneticField::nominalValue(), DTTTrigBaseSync::setES(), DTRecHitBaseAlgo::theSync, uncertMap, useUncertDB, DTRecoUncertainties::version(), and DTMtime::version().

                                                            {
   if(debug)
     cout<<"[DTLinearDriftFromDBAlgo] setES called"<<endl;
   theSync->setES(setup);
   // Get the map of ttrig from the Setup
   ESHandle<DTMtime> mTimeHandle;
   setup.get<DTMtimeRcd>().get(mTimeHandle);
   mTimeMap = &*mTimeHandle;
 
   ESHandle<MagneticField> magfield;
   setup.get<IdealMagneticFieldRecord>().get(magfield);
   field = &*magfield;
   nominalB = field->nominalValue();
 
   if (useUncertDB) {
     ESHandle<DTRecoUncertainties> uncerts;
     setup.get<DTRecoUncertaintiesRcd>().get(uncerts);
     uncertMap = &*uncerts;
   
     // check uncertainty map type
     if (uncertMap->version()>1) edm::LogError("NotImplemented") << "DT Uncertainty DB version unknown: " << uncertMap->version();
   }
   
   if(debug) {
     cout << "[DTLinearDriftFromDBAlgo] meanTimer version: " << mTimeMap->version()<<endl;
     if (useUncertDB) cout << "                          uncertDB  version: " << uncertMap->version()<<endl;
   }
   
 }

Member Data Documentation

const bool DTLinearDriftFromDBAlgo::debug

private

Definition at line 112 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute(), DTLinearDriftFromDBAlgo(), and setES().

const bool DTLinearDriftFromDBAlgo::doVdriftCorr

private

Definition at line 101 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute().

const MagneticField* DTLinearDriftFromDBAlgo::field

private

Definition at line 88 of file DTLinearDriftFromDBAlgo.h.

Referenced by setES().

const float DTLinearDriftFromDBAlgo::maxTime

private

Definition at line 98 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute().

const float DTLinearDriftFromDBAlgo::minTime

private

Definition at line 95 of file DTLinearDriftFromDBAlgo.h.

const DTMtime* DTLinearDriftFromDBAlgo::mTimeMap

private

Definition at line 85 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute(), and setES().

int DTLinearDriftFromDBAlgo::nominalB

private

Definition at line 89 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute(), and setES().

const bool DTLinearDriftFromDBAlgo::stepTwoFromDigi

private

Definition at line 105 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute().

const DTRecoUncertainties* DTLinearDriftFromDBAlgo::uncertMap

private

Definition at line 92 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute(), and setES().

bool DTLinearDriftFromDBAlgo::useUncertDB

private

Definition at line 109 of file DTLinearDriftFromDBAlgo.h.

Referenced by compute(), DTLinearDriftFromDBAlgo(), and setES().

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation