#include <HcalHFStatusBitFromRecHits.h>

Public Member Functions
double	bit ()

	HcalHFStatusBitFromRecHits ()

	HcalHFStatusBitFromRecHits (double shortR, double shortET, double shortE, double longR, double longET, double longE)

void	hfSetFlagFromRecHits (HFRecHitCollection &rec, HcalChannelQuality myqual, const HcalSeverityLevelComputer mySeverity)

double	long_energythreshold ()

double	long_ETthreshold ()

double	long_hflongshortratio ()

void	set_long_energythreshold (double x)

void	set_long_ETthreshold (double x)

void	set_long_hflongshortratio (double x)

void	set_short_energythreshold (double x)

void	set_short_ETthreshold (double x)

void	set_short_hflongshortratio (double x)

double	short_energythreshold ()

double	short_ETthreshold ()

double	short_hflongshortratio ()

	~HcalHFStatusBitFromRecHits ()

Private Attributes
double	long_HFlongshortratio_

double	long_thresholdEnergy_

double	long_thresholdET_

double	short_HFlongshortratio_

double	short_thresholdEnergy_

double	short_thresholdET_

Detailed Description

This class sets status bit in the status words for the revised CaloRecHit objets using comparisons between the rec hit energies of long and short fibers for a given HF (ieat, iphi)

Author: J. Temple – University of Maryland and E. Yazgan

Definition at line 19 of file HcalHFStatusBitFromRecHits.h.

Constructor & Destructor Documentation

HcalHFStatusBitFromRecHits::HcalHFStatusBitFromRecHits ( )

Full featured constructor for HB/HE and HO (HPD-based detectors)

Definition at line 9 of file HcalHFStatusBitFromRecHits.cc.

References long_HFlongshortratio_, long_thresholdEnergy_, long_thresholdET_, short_HFlongshortratio_, short_thresholdEnergy_, and short_thresholdET_.

 {
   // use simple values in default constructor
   long_HFlongshortratio_   = 0.99;
   short_HFlongshortratio_  = 0.99;
   long_thresholdET_    = 0.5; // default energy requirement
   short_thresholdET_   = 0.5;
   long_thresholdEnergy_ = 100;
   short_thresholdEnergy_ = 100;
 }

HcalHFStatusBitFromRecHits::HcalHFStatusBitFromRecHits	(	double	shortR,
		double	shortET,
		double	shortE,
		double	longR,
		double	longET,
		double	longE
	)

Definition at line 20 of file HcalHFStatusBitFromRecHits.cc.

References long_HFlongshortratio_, long_thresholdEnergy_, long_thresholdET_, short_HFlongshortratio_, short_thresholdEnergy_, and short_thresholdET_.

 {
   long_HFlongshortratio_   = longR; 
   short_HFlongshortratio_  = shortR;
   long_thresholdET_        = longET;
   short_thresholdET_       = shortET;
   long_thresholdEnergy_    = longE;
   short_thresholdEnergy_   = shortE;
 }

HcalHFStatusBitFromRecHits::~HcalHFStatusBitFromRecHits ( )

Definition at line 31 of file HcalHFStatusBitFromRecHits.cc.

31 {}

Member Function Documentation

double HcalHFStatusBitFromRecHits::bit ( )

inline

Definition at line 42 of file HcalHFStatusBitFromRecHits.h.

References HcalCaloFlagLabels::HFLongShort.

42 {return HcalCaloFlagLabels::HFLongShort;}

HcalCaloFlagLabels::HFLongShort

Definition: HcalCaloFlagLabels.h:33

void HcalHFStatusBitFromRecHits::hfSetFlagFromRecHits	(	HFRecHitCollection &	rec,
		HcalChannelQuality *	myqual,
		const HcalSeverityLevelComputer *	mySeverity
	)

Definition at line 33 of file HcalHFStatusBitFromRecHits.cc.

References funct::abs(), edm::SortedCollection< T, SORT >::begin(), HLT_25ns14e33_v1_cff::depth, HcalSeverityLevelComputer::dropChannel(), edm::SortedCollection< T, SORT >::end(), HcalChannelStatus::getValue(), HcalCondObjectContainer< Item >::getValues(), HcalForward, HcalCaloFlagLabels::HFLongShort, long_HFlongshortratio_, long_thresholdEnergy_, long_thresholdET_, DetId::rawId(), short_HFlongshortratio_, short_thresholdEnergy_, short_thresholdET_, ntuplemaker::status, and theHFEtaBounds.

 {
   // Compares energies from long & short fibers
   int status;
   float en, en2;
   int ieta, iphi, depth;
   float ratio; // ratio of (L-S)/(L+S) energy magnitudes
   double coshEta;
 
   // Is there a faster way to do this than a double loop?
   for (HFRecHitCollection::iterator iHF=rec.begin(); iHF!=rec.end();++iHF)
     {
       // skip cells that have already been tagged -- shouldn't happen in current algorithm
       //if (iHF->flagField(HcalCaloFlagLabels::HFLongShort, HcalCaloFlagLabels::HFLongShort+1)) continue;
 
       ieta =iHF->id().ieta();  // int between 29-41
       // eta = average value between cell eta bounds
       coshEta=fabs(cosh(0.5*(theHFEtaBounds[abs(ieta)-29]+theHFEtaBounds[abs(ieta)-28])));
 
       status=0; // status bit for rechit
 
       en2=-999; // dummy starting value for partner energy
       depth=iHF->id().depth();
       en=iHF->energy(); // energy of current rechit
 
       if (depth==1) // check long fiber
     {
       if (en<1.2) continue;  // never flag long rechits < 1.2 GeV
       if (long_thresholdEnergy_>0. && en<long_thresholdEnergy_) continue;
       if (long_thresholdET_>0. && en<long_thresholdET_*coshEta) continue;
     }
 
       else if (depth==2) // check short fiber
     {
       if (en<1.8) continue;  // never flag short rechits < 1.8 GeV
       if (short_thresholdEnergy_>0. && en<short_thresholdEnergy_) continue;
       if (short_thresholdET_>0. && en<short_thresholdET_*coshEta) continue;
     }
       
       iphi =iHF->id().iphi();
 
       // Check for cells whose partners have been excluded from the rechit collections
       // Such cells will not get flagged (since we can't make an L vs. S comparison)
 
       HcalDetId partner(HcalForward, ieta, iphi, 3-depth); // if depth=1, 3-depth =2, and vice versa
       DetId detpartner=DetId(partner);
       const HcalChannelStatus* partnerstatus=myqual->getValues(detpartner.rawId());
       if (mySeverity->dropChannel(partnerstatus->getValue() ) ) continue;  // partner was dropped; don't set flag
 
       // inner loop will find 'partner' channel (same ieta, iphi, different depth)
       for (HFRecHitCollection::iterator iHF2=rec.begin(); iHF2!=rec.end();++iHF2)
     {
       if (iHF2->id().ieta()!=ieta) continue; // require ieta match
       if (iHF2->id().iphi()!=iphi) continue; // require iphi match
       if (iHF2->id().depth()==depth) continue;  // require short/long combo
 
       en2=iHF2->energy(); 
 
       /* 
          We used to use absolute values of energies for ratios, but I don't think we want to do this any more.
          For example, for a threshold of 0.995, if en=50 and en2=0, the flag would be set.
          But if en=50 and en2<-0.125, the threshold would not be set if using the absolute values.
          I don't think we want to have a range of en2 below which the flag is not set.
          This does mean that we need to be careful not to set the en energy threshold too low,
          so as to not falsely flag fluctuations (en=2, en2=-0.01, for example), but we should never be setting our
          thresholds that low.
       */
       
       ratio = (en - en2)/(en + en2);
       
       if (depth==1 && ratio>long_HFlongshortratio_)
         status=1;
       else if (depth==2 && ratio>short_HFlongshortratio_)
         status=1;
       break; // once partner channel found, break out of loop
     } // inner loop
 
       // Consider the case where only one depth present
       if (en2==-999) // outer rechit has already passed energy, ET thresholds above; no partner cell means this looks like isolated energy in one channel -- flag it!
     status=1;
 
       // flag rechit as potential PMT window hit
       if (status==1) 
     iHF->setFlagField(status,HcalCaloFlagLabels::HFLongShort, 1);
     } // outer loop
   return;
 } // void HcalHFStatusBitFromRecHits::hfSetFlagFromRecHits(...)