#include <CandidateSeededTrackingRegionsProducer.h>

Inheritance diagram for CandidateSeededTrackingRegionsProducer:

Public Types
enum	Mode { BEAM_SPOT_FIXED, BEAM_SPOT_SIGMA, VERTICES_FIXED, VERTICES_SIGMA }

Public Member Functions
	CandidateSeededTrackingRegionsProducer (const edm::ParameterSet &conf, edm::ConsumesCollector &&iC)

virtual std::vector < TrackingRegion * >	regions (const edm::Event &e, const edm::EventSetup &es) const

virtual	~CandidateSeededTrackingRegionsProducer ()

Public Member Functions inherited from TrackingRegionProducer
virtual	~TrackingRegionProducer ()

Private Attributes
float	m_deltaEta

float	m_deltaPhi

int	m_maxNRegions

int	m_maxNVertices

Mode	m_mode

float	m_nSigmaZBeamSpot

float	m_nSigmaZVertex

float	m_originRadius

bool	m_precise

float	m_ptMin

bool	m_searchOpt

RectangularEtaPhiTrackingRegion::UseMeasurementTracker	m_whereToUseMeasurementTracker

float	m_zErrorBeamSpot

float	m_zErrorVetex

edm::EDGetTokenT< reco::BeamSpot >	token_beamSpot

edm::EDGetTokenT < reco::CandidateView >	token_input

edm::EDGetTokenT < MeasurementTrackerEvent >	token_measurementTracker

edm::EDGetTokenT < reco::VertexCollection >	token_vertex

Detailed Description

class CandidateSeededTrackingRegionsProducer

eta-phi TrackingRegions producer in directions defined by Candidate-based objects of interest from a collection defined by the "input" parameter.

Four operational modes are supported ("mode" parameter):

BeamSpotFixed: origin is defined by the beam spot z-half-length is defined by a fixed zErrorBeamSpot parameter BeamSpotSigma: origin is defined by the beam spot z-half-length is defined by nSigmaZBeamSpot * beamSpot.sigmaZ VerticesFixed: origins are defined by vertices from VertexCollection (use maximum MaxNVertices of them) z-half-length is defined by a fixed zErrorVetex parameter VerticesSigma: origins are defined by vertices from VertexCollection (use maximum MaxNVertices of them) z-half-length is defined by nSigmaZVertex * vetex.zError

If, while using one of the "Vertices" modes, there's no vertices in an event, we fall back into either BeamSpotSigma or BeamSpotFixed mode, depending on the positiveness of nSigmaZBeamSpot.

Author: Vadim Khotilovich

Definition at line 44 of file CandidateSeededTrackingRegionsProducer.h.

Member Enumeration Documentation

enum CandidateSeededTrackingRegionsProducer::Mode

Enumerator
BEAM_SPOT_FIXED
BEAM_SPOT_SIGMA
VERTICES_FIXED
VERTICES_SIGMA

Definition at line 48 of file CandidateSeededTrackingRegionsProducer.h.

48 {BEAM_SPOT_FIXED, BEAM_SPOT_SIGMA, VERTICES_FIXED, VERTICES_SIGMA } Mode;

CandidateSeededTrackingRegionsProducer::VERTICES_FIXED

Definition: CandidateSeededTrackingRegionsProducer.h:48

CandidateSeededTrackingRegionsProducer::Mode

Mode

Definition: CandidateSeededTrackingRegionsProducer.h:48

CandidateSeededTrackingRegionsProducer::BEAM_SPOT_SIGMA

Definition: CandidateSeededTrackingRegionsProducer.h:48

CandidateSeededTrackingRegionsProducer::VERTICES_SIGMA

Definition: CandidateSeededTrackingRegionsProducer.h:48

CandidateSeededTrackingRegionsProducer::BEAM_SPOT_FIXED

Definition: CandidateSeededTrackingRegionsProducer.h:48

Constructor & Destructor Documentation

CandidateSeededTrackingRegionsProducer::CandidateSeededTrackingRegionsProducer	(	const edm::ParameterSet &	conf,
		edm::ConsumesCollector &&	iC
	)

inlineexplicit

Definition at line 50 of file CandidateSeededTrackingRegionsProducer.h.

References BEAM_SPOT_FIXED, BEAM_SPOT_SIGMA, RectangularEtaPhiTrackingRegion::doubleToUseMeasurementTracker(), edm::ParameterSet::exists(), edm::ParameterSet::getParameter(), RectangularEtaPhiTrackingRegion::kForSiStrips, RectangularEtaPhiTrackingRegion::kNever, m_deltaEta, m_deltaPhi, m_maxNRegions, m_maxNVertices, m_mode, m_nSigmaZBeamSpot, m_nSigmaZVertex, m_originRadius, m_precise, m_ptMin, m_searchOpt, m_whereToUseMeasurementTracker, m_zErrorBeamSpot, m_zErrorVetex, AlCaHLTBitMon_QueryRunRegistry::string, token_beamSpot, token_input, token_measurementTracker, token_vertex, VERTICES_FIXED, and VERTICES_SIGMA.

   {
     edm::ParameterSet regPSet = conf.getParameter<edm::ParameterSet>("RegionPSet");
 
     // operation mode
     std::string modeString       = regPSet.getParameter<std::string>("mode");
     if      (modeString == "BeamSpotFixed") m_mode = BEAM_SPOT_FIXED;
     else if (modeString == "BeamSpotSigma") m_mode = BEAM_SPOT_SIGMA;
     else if (modeString == "VerticesFixed") m_mode = VERTICES_FIXED;
     else if (modeString == "VerticesSigma") m_mode = VERTICES_SIGMA;
     else  edm::LogError ("CandidateSeededTrackingRegionsProducer")<<"Unknown mode string: "<<modeString;
 
     // basic inputs
     token_input        = iC.consumes<reco::CandidateView>(regPSet.getParameter<edm::InputTag>("input"));
     m_maxNRegions      = regPSet.getParameter<int>("maxNRegions");
     token_beamSpot     = iC.consumes<reco::BeamSpot>(regPSet.getParameter<edm::InputTag>("beamSpot"));
     m_maxNVertices     = 1;
     if (m_mode == VERTICES_FIXED || m_mode == VERTICES_SIGMA)
     {
       token_vertex       = iC.consumes<reco::VertexCollection>(regPSet.getParameter<edm::InputTag>("vertexCollection"));
       m_maxNVertices     = regPSet.getParameter<int>("maxNVertices");
     }
 
     // RectangularEtaPhiTrackingRegion parameters:
     m_ptMin            = regPSet.getParameter<double>("ptMin");
     m_originRadius     = regPSet.getParameter<double>("originRadius");
     m_zErrorBeamSpot   = regPSet.getParameter<double>("zErrorBeamSpot");
     m_deltaEta         = regPSet.getParameter<double>("deltaEta");
     m_deltaPhi         = regPSet.getParameter<double>("deltaPhi");
     m_precise          = regPSet.getParameter<bool>("precise");
     m_whereToUseMeasurementTracker = RectangularEtaPhiTrackingRegion::UseMeasurementTracker::kForSiStrips;
     if (regPSet.exists("measurementTrackerName"))
     {
       // FIXME: when next time altering the configuration of this
       // class, please change the types of the following parameters:
       // - whereToUseMeasurementTracker to at least int32 or to a string
       //   corresponding to the UseMeasurementTracker enumeration
       // - measurementTrackerName to InputTag
       if (regPSet.exists("whereToUseMeasurementTracker"))
         m_whereToUseMeasurementTracker = RectangularEtaPhiTrackingRegion::doubleToUseMeasurementTracker(regPSet.getParameter<double>("whereToUseMeasurementTracker"));
       if(m_whereToUseMeasurementTracker != RectangularEtaPhiTrackingRegion::UseMeasurementTracker::kNever)
         token_measurementTracker = iC.consumes<MeasurementTrackerEvent>(regPSet.getParameter<std::string>("measurementTrackerName"));
     }
     m_searchOpt = false;
     if (regPSet.exists("searchOpt")) m_searchOpt = regPSet.getParameter<bool>("searchOpt");
 
     // mode-dependent z-halflength of tracking regions
     if (m_mode == VERTICES_SIGMA)  m_nSigmaZVertex   = regPSet.getParameter<double>("nSigmaZVertex");
     if (m_mode == VERTICES_FIXED)  m_zErrorVetex     = regPSet.getParameter<double>("zErrorVetex");
     m_nSigmaZBeamSpot = -1.;
     if (m_mode == BEAM_SPOT_SIGMA)
     {
       m_nSigmaZBeamSpot = regPSet.getParameter<double>("nSigmaZBeamSpot");
       if (m_nSigmaZBeamSpot < 0.)
         edm::LogError ("CandidateSeededTrackingRegionsProducer")<<"nSigmaZBeamSpot must be positive for BeamSpotSigma mode!";
     }
   }

virtual CandidateSeededTrackingRegionsProducer::~CandidateSeededTrackingRegionsProducer ( )

inlinevirtual

Definition at line 109 of file CandidateSeededTrackingRegionsProducer.h.

109 {}

Member Function Documentation

virtual std::vector<TrackingRegion* > CandidateSeededTrackingRegionsProducer::regions	(	const edm::Event &	e,
		const edm::EventSetup &	es
	)		const

inlinevirtual

Implements TrackingRegionProducer.

Definition at line 112 of file CandidateSeededTrackingRegionsProducer.h.

References BEAM_SPOT_FIXED, BEAM_SPOT_SIGMA, plotBeamSpotDB::first, edm::Event::getByToken(), i, edm::EDGetTokenT< T >::isUninitialized(), edm::HandleBase::isValid(), j, m_deltaEta, m_deltaPhi, m_maxNRegions, m_maxNVertices, m_mode, m_nSigmaZBeamSpot, m_nSigmaZVertex, m_originRadius, m_precise, m_ptMin, m_searchOpt, m_whereToUseMeasurementTracker, m_zErrorBeamSpot, m_zErrorVetex, HLT_25ns14e33_v1_cff::measurementTracker, edm::Handle< T >::product(), query::result, edm::second(), token_beamSpot, token_input, token_measurementTracker, token_vertex, findQualityFiles::v, HLT_25ns14e33_v1_cff::vertices, VERTICES_FIXED, VERTICES_SIGMA, x, detailsBasic3DVector::y, and detailsBasic3DVector::z.

   {
     std::vector<TrackingRegion* > result;
 
     // pick up the candidate objects of interest
     edm::Handle< reco::CandidateView > objects;
     e.getByToken( token_input, objects );
     size_t n_objects = objects->size();
     if (n_objects == 0) return result;
 
     // always need the beam spot (as a fall back strategy for vertex modes)
     edm::Handle< reco::BeamSpot > bs;
     e.getByToken( token_beamSpot, bs );
     if( !bs.isValid() ) return result;
 
     // this is a default origin for all modes
     GlobalPoint default_origin( bs->x0(), bs->y0(), bs->z0() );
 
     // vector of origin & halfLength pairs:
     std::vector< std::pair< GlobalPoint, float > > origins;
 
     // fill the origins and halfLengths depending on the mode
     if (m_mode == BEAM_SPOT_FIXED || m_mode == BEAM_SPOT_SIGMA)
     {
       origins.push_back( std::make_pair(
           default_origin,
           (m_mode == BEAM_SPOT_FIXED) ? m_zErrorBeamSpot : m_nSigmaZBeamSpot*bs->sigmaZ()
       ));
     }
     else if (m_mode == VERTICES_FIXED || m_mode == VERTICES_SIGMA)
     {
       edm::Handle< reco::VertexCollection > vertices;
       e.getByToken( token_vertex, vertices );
       int n_vert = 0;
       for (reco::VertexCollection::const_iterator v = vertices->begin(); v != vertices->end() && n_vert < m_maxNVertices; ++v)
       {
         if ( v->isFake() || !v->isValid() ) continue;
 
         origins.push_back( std::make_pair(
             GlobalPoint( v->x(), v->y(), v->z() ),
             (m_mode == VERTICES_FIXED) ? m_zErrorVetex : m_nSigmaZVertex*v->zError()
         ));
         ++n_vert;
       }
       // no-vertex fall-back case:
       if (origins.empty())
       {
         origins.push_back( std::make_pair(
             default_origin,
             (m_nSigmaZBeamSpot > 0.) ? m_nSigmaZBeamSpot*bs->z0Error() : m_zErrorBeamSpot
         ));
       }
     }
     
     const MeasurementTrackerEvent *measurementTracker = nullptr;
     if(!token_measurementTracker.isUninitialized()) {
       edm::Handle<MeasurementTrackerEvent> hmte;
       e.getByToken(token_measurementTracker, hmte);
       measurementTracker = hmte.product();
     }
 
     // create tracking regions (maximum MaxNRegions of them) in directions of the
     // objects of interest (we expect that the collection was sorted in decreasing pt order)
     int n_regions = 0;
     for(size_t i = 0; i < n_objects && n_regions < m_maxNRegions; ++i )
     {
       const reco::Candidate & object = (*objects)[i];
       GlobalVector direction( object.momentum().x(), object.momentum().y(), object.momentum().z() );
 
       for (size_t  j=0; j<origins.size() && n_regions < m_maxNRegions; ++j)
       {
         result.push_back( new RectangularEtaPhiTrackingRegion(
           direction,
           origins[j].first,
           m_ptMin,
           m_originRadius,
           origins[j].second,
           m_deltaEta,
           m_deltaPhi,
           m_whereToUseMeasurementTracker,
           m_precise,
           measurementTracker,
           m_searchOpt
         ));
         ++n_regions;
       }
     }
     //std::cout<<"n_seeded_regions = "<<n_regions<<std::endl;
     edm::LogInfo ("CandidateSeededTrackingRegionsProducer") << "produced "<<n_regions<<" regions";
 
     return result;
   }