#include <MillePedeAlignmentAlgorithm.h>

Inheritance diagram for MillePedeAlignmentAlgorithm:

Public Member Functions
virtual bool	addCalibrations (const std::vector< IntegratedCalibrationBase * > &iCals)
	pass integrated calibrations to Millepede (they are not owned by Millepede!) More...

virtual void	endRun (const EventInfo &eventInfo, const EndRunInfo &runInfo, const edm::EventSetup &setup)
	Run on run products, e.g. TkLAS. More...

virtual void	initialize (const edm::EventSetup &setup, AlignableTracker tracker, AlignableMuon muon, AlignableExtras extras, AlignmentParameterStore store)
	Call at beginning of job. More...

	MillePedeAlignmentAlgorithm (const edm::ParameterSet &cfg)
	Constructor. More...

virtual void	run (const edm::EventSetup &setup, const EventInfo &eventInfo)
	Run the algorithm on trajectories and tracks. More...

virtual bool	setParametersForRunRange (const RunRange &runrange)

virtual void	terminate (const edm::EventSetup &iSetup)
	Call at end of job. More...

virtual	~MillePedeAlignmentAlgorithm ()
	Destructor. More...

Public Member Functions inherited from AlignmentAlgorithmBase
	AlignmentAlgorithmBase (const edm::ParameterSet &cfg)
	Constructor. More...

virtual void	beginLuminosityBlock (const edm::EventSetup &setup)
	called at begin of luminosity block (no lumi block info passed yet) More...

virtual void	beginRun (const edm::EventSetup &setup)
	called at begin of run More...

virtual void	endLuminosityBlock (const edm::EventSetup &setup)
	called at end of luminosity block (no lumi block info passed yet) More...

virtual void	endRun (const EndRunInfo &runInfo, const edm::EventSetup &setup)
	called at end of run - order of arguments like in EDProducer etc. More...

virtual void	startNewLoop ()

virtual	~AlignmentAlgorithmBase ()
	Destructor. More...

Private Types
enum	EModeBit { myMilleBit = 1 << 0, myPedeRunBit = 1 << 1, myPedeSteerBit = 1 << 2, myPedeReadBit = 1 << 3 }

enum	MeasurementDirection { kLocalX = 0, kLocalY }

Private Member Functions
int	addGlobalData (const edm::EventSetup &setup, const EventInfo &eventInfo, const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iHit, GblPoint &gblPoint)

unsigned int	addHitCount (const std::vector< AlignmentParameters * > &parVec, const std::vector< bool > &validHitVecY) const

bool	addHits (const std::vector< Alignable * > &alis, const std::vector< AlignmentUserVariables * > &mpVars) const

bool	addHitStatistics (int fromLoop, const std::string &outFile, const std::vector< std::string > &inFiles) const

void	addLasBeam (const EventInfo &eventInfo, const TkFittedLasBeam &lasBeam, const std::vector< TrajectoryStateOnSurface > &tsoses)

void	addLaserData (const EventInfo &eventInfo, const TkFittedLasBeamCollection &tkLasBeams, const TsosVectorCollection &tkLasBeamTsoses)

int	addMeasurementData (const edm::EventSetup &setup, const EventInfo &eventInfo, const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iHit, AlignmentParameters *&params)

void	addPxbSurvey (const edm::ParameterSet &pxbSurveyCfg)
	add measurement data from PXB survey More...

std::pair< unsigned int, unsigned int >	addReferenceTrajectory (const edm::EventSetup &setup, const EventInfo &eventInfo, const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr)
	fill mille for a trajectory, returning number of x/y hits ([0,0] if 'bad' trajectory) More...

void	addRefTrackData2D (const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, TMatrixDSym &aHitCovarianceM, TMatrixF &aHitResidualsM, TMatrixF &aLocalDerivativesM)
	adds data from reference trajectory from a specific Hit More...

void	addRefTrackVirtualMeas1D (const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iVirtualMeas, TMatrixDSym &aHitCovarianceM, TMatrixF &aHitResidualsM, TMatrixF &aLocalDerivativesM)
	adds data for a specific virtual measurement from reference trajectory More...

void	addVirtualMeas (const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iVirtualMeas)
	adds data for virtual measurements from reference trajectory More...

bool	areEmptyParams (const std::vector< Alignable * > &alignables) const

void	buildUserVariables (const std::vector< Alignable * > &alignables) const
	add MillePedeVariables for each AlignmentParameters (exception if no parameters...) More...

int	callMille (const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, const std::vector< int > &globalLabels, const std::vector< float > &globalDerivativesX, const std::vector< float > &globalDerivativesY)
	calls callMille1D or callMille2D More...

int	callMille1D (const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, const std::vector< int > &globalLabels, const std::vector< float > &globalDerivativesX)
	calls Mille for 1D hits More...

int	callMille2D (const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &refTrajPtr, unsigned int iTrajHit, const std::vector< int > &globalLabels, const std::vector< float > &globalDerivativesx, const std::vector< float > &globalDerivativesy)

unsigned int	decodeMode (const std::string &mode) const

void	diagonalize (TMatrixDSym &aHitCovarianceM, TMatrixF &aLocalDerivativesM, TMatrixF &aHitResidualsM, TMatrixF &theGlobalDerivativesM) const

unsigned int	doIO (int loop) const

void	globalDerivativesCalibration (const TransientTrackingRecHit::ConstRecHitPointer &recHit, const TrajectoryStateOnSurface &tsos, const edm::EventSetup &setup, const EventInfo &eventInfo, std::vector< float > &globalDerivativesX, std::vector< float > &globalDerivativesY, std::vector< int > &globalLabels) const
	adding derivatives from integrated calibrations More...

bool	globalDerivativesHierarchy (const EventInfo &eventInfo, const TrajectoryStateOnSurface &tsos, Alignable ali, const AlignableDetOrUnitPtr &alidet, std::vector< float > &globalDerivativesX, std::vector< float > &globalDerivativesY, std::vector< int > &globalLabels, AlignmentParameters &lowestParams) const
	recursively adding derivatives and labels, false if problems More...

bool	globalDerivativesHierarchy (const EventInfo &eventInfo, const TrajectoryStateOnSurface &tsos, Alignable ali, const AlignableDetOrUnitPtr &alidet, std::vector< double > &globalDerivativesX, std::vector< double > &globalDerivativesY, std::vector< int > &globalLabels, AlignmentParameters &lowestParams) const
	recursively adding derivatives (double) and labels, false if problems More...

bool	is2D (const TransientTrackingRecHit::ConstRecHitPointer &recHit) const
	true if hit belongs to 2D detector (currently tracker specific) More...

bool	isMode (unsigned int testMode) const

void	makeGlobDerivMatrix (const std::vector< float > &globalDerivativesx, const std::vector< float > &globalDerivativesy, TMatrixF &aGlobalDerivativesM)

bool	readFromPede (const edm::ParameterSet &mprespset, bool setUserVars, const RunRange &runrange)
	read pede input defined by 'psetName', flag to create/not create MillePedeVariables More...

Private Attributes
AlignableNavigator *	theAlignableNavigator

std::vector< Alignable * >	theAlignables

AlignmentParameterStore *	theAlignmentParameterStore
	directory for all kind of files More...

MilleBinary *	theBinary

std::vector < IntegratedCalibrationBase * >	theCalibrations

edm::ParameterSet	theConfig

std::string	theDir

bool	theDoSurveyPixelBarrel

std::vector< float >	theFloatBufferX

std::vector< float >	theFloatBufferY

bool	theGblDoubleBinary

std::vector< int >	theIntBuffer

int	theLastWrittenIov

double	theMaximalCor2D

Mille *	theMille

unsigned int	theMinNumHits

unsigned int	theMode

MillePedeMonitor *	theMonitor

PedeLabelerBase *	thePedeLabels

PedeSteerer *	thePedeSteer

TrajectoryFactoryBase *	theTrajectoryFactory

Additional Inherited Members
Public Types inherited from AlignmentAlgorithmBase
typedef std::pair< const Trajectory , const reco::Track >	ConstTrajTrackPair

typedef std::vector < ConstTrajTrackPair >	ConstTrajTrackPairCollection

typedef cond::RealTimeType < cond::runnumber >::type	RunNumber

typedef std::pair< RunNumber, RunNumber >	RunRange

Detailed Description

CMSSW interface to pede: produces pede's binary input and steering file(s)

Author: : Gero Flucke date : October 2006

Revision:: 1.36

Date:: 2012/08/10 09:01:11

(last update by

Author:: flucke

)

Definition at line 54 of file MillePedeAlignmentAlgorithm.h.

Member Enumeration Documentation

enum MillePedeAlignmentAlgorithm::EModeBit

private

Enumerator
myMilleBit
myPedeRunBit
myPedeSteerBit
myPedeReadBit

Definition at line 208 of file MillePedeAlignmentAlgorithm.h.

208 {myMilleBit = 1 << 0, myPedeRunBit = 1 << 1, myPedeSteerBit = 1 << 2,

209 myPedeReadBit = 1 << 3};

MillePedeAlignmentAlgorithm::myMilleBit

Definition: MillePedeAlignmentAlgorithm.h:208

MillePedeAlignmentAlgorithm::myPedeReadBit

Definition: MillePedeAlignmentAlgorithm.h:209

MillePedeAlignmentAlgorithm::myPedeRunBit

Definition: MillePedeAlignmentAlgorithm.h:208

MillePedeAlignmentAlgorithm::myPedeSteerBit

Definition: MillePedeAlignmentAlgorithm.h:208

enum MillePedeAlignmentAlgorithm::MeasurementDirection

private

Enumerator
kLocalX
kLocalY

Definition at line 89 of file MillePedeAlignmentAlgorithm.h.

89 {kLocalX = 0, kLocalY};

MillePedeAlignmentAlgorithm::kLocalY

Definition: MillePedeAlignmentAlgorithm.h:89

MillePedeAlignmentAlgorithm::kLocalX

Definition: MillePedeAlignmentAlgorithm.h:89

Constructor & Destructor Documentation

MillePedeAlignmentAlgorithm::MillePedeAlignmentAlgorithm ( const edm::ParameterSet & cfg )

Constructor.

Definition at line 83 of file MillePedeAlignmentAlgorithm.cc.

References edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), isMode(), myMilleBit, AlCaHLTBitMon_QueryRunRegistry::string, theBinary, theConfig, theDir, theGblDoubleBinary, and theMille.

                                                                                    :
   AlignmentAlgorithmBase(cfg), 
   theConfig(cfg), theMode(this->decodeMode(theConfig.getUntrackedParameter<std::string>("mode"))),
   theDir(theConfig.getUntrackedParameter<std::string>("fileDir")),
   theAlignmentParameterStore(0), theAlignables(), theAlignableNavigator(0),
   theMonitor(0), theMille(0), thePedeLabels(0), thePedeSteer(0),
   theTrajectoryFactory(0),
   theMinNumHits(cfg.getParameter<unsigned int>("minNumHits")),
   theMaximalCor2D(cfg.getParameter<double>("max2Dcorrelation")),
   theLastWrittenIov(0),
   theBinary(0),theGblDoubleBinary(cfg.getParameter<bool>("doubleBinary"))
 {
   if (!theDir.empty() && theDir.find_last_of('/') != theDir.size()-1) theDir += '/';// may need '/'
   edm::LogInfo("Alignment") << "@SUB=MillePedeAlignmentAlgorithm" << "Start in mode '"
                             << theConfig.getUntrackedParameter<std::string>("mode")
                             << "' with output directory '" << theDir << "'.";
   if (this->isMode(myMilleBit)) {
     theMille = new Mille((theDir + theConfig.getParameter<std::string>("binaryFile")).c_str());// add ', false);' for text output);
     // use same file for GBL
     theBinary = new MilleBinary((theDir + theConfig.getParameter<std::string>("binaryFile")).c_str(), theGblDoubleBinary);
   }
 }

MillePedeAlignmentAlgorithm::~MillePedeAlignmentAlgorithm ( )

virtual

Destructor.

Definition at line 108 of file MillePedeAlignmentAlgorithm.cc.

References theAlignableNavigator, theMille, theMonitor, thePedeLabels, thePedeSteer, and theTrajectoryFactory.

 {
   delete theAlignableNavigator;
   theAlignableNavigator = 0;
   delete theMille;
   theMille = 0;
   delete theMonitor;
   theMonitor = 0;
   delete thePedeSteer;
   thePedeSteer = 0;
   delete thePedeLabels;
   thePedeLabels = 0;
   delete theTrajectoryFactory;
   theTrajectoryFactory = 0;
 }

Member Function Documentation

bool MillePedeAlignmentAlgorithm::addCalibrations ( const std::vector< IntegratedCalibrationBase * > & iCals )

virtual

pass integrated calibrations to Millepede (they are not owned by Millepede!)

Reimplemented from AlignmentAlgorithmBase.

Definition at line 244 of file MillePedeAlignmentAlgorithm.cc.

References PedeLabelerBase::addCalibrations(), theCalibrations, and thePedeLabels.

 {
   theCalibrations.insert(theCalibrations.end(), iCals.begin(), iCals.end());
   thePedeLabels->addCalibrations(iCals);
   return true;
 }

int MillePedeAlignmentAlgorithm::addGlobalData	(	const edm::EventSetup &	setup,
		const EventInfo &	eventInfo,
		const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iHit,
		GblPoint &	gblPoint
	)

private

Add global data (labels, derivatives) to GBL trajectory Returns -1 if any problem (for params cf. globalDerivativesHierarchy)

Definition at line 512 of file MillePedeAlignmentAlgorithm.cc.

References gbl::GblPoint::addGlobals(), AlignableNavigator::alignableFromDetId(), PedeLabelerBase::calibrationLabel(), ecal_dqm_sourceclient-live_cfg::cerr, globalDerivativesHierarchy(), i, theAlignableNavigator, theCalibrations, theIntBuffer, and thePedeLabels.

Referenced by addReferenceTrajectory().

 {
   AlignmentParameters* params = 0;
   std::vector<double> theDoubleBufferX, theDoubleBufferY;
   theDoubleBufferX.clear();
   theDoubleBufferY.clear();
   theIntBuffer.clear();
   int iret = 0;
 
   const TrajectoryStateOnSurface &tsos = refTrajPtr->trajectoryStates()[iHit];
   const ConstRecHitPointer &recHitPtr = refTrajPtr->recHits()[iHit];
   // ignore invalid hits
   if (!recHitPtr->isValid()) return 0;
 
   // get AlignableDet/Unit for this hit
   AlignableDetOrUnitPtr alidet(theAlignableNavigator->alignableFromDetId(recHitPtr->geographicalId()));
 
   if (!this->globalDerivativesHierarchy(eventInfo,
                                         tsos, alidet, alidet, theDoubleBufferX, // 2x alidet, sic!
                                         theDoubleBufferY, theIntBuffer, params)) {
     return -1; // problem
   }
   //calibration parameters
   int globalLabel;
   std::vector<IntegratedCalibrationBase::ValuesIndexPair> derivs;
   for (auto iCalib = theCalibrations.begin(); iCalib != theCalibrations.end(); ++iCalib) {
     // get all derivatives of this calibration // const unsigned int num =
     (*iCalib)->derivatives(derivs, *recHitPtr, tsos, setup, eventInfo);
     for (auto iValuesInd = derivs.begin(); iValuesInd != derivs.end(); ++iValuesInd) {
       // transfer label and x/y derivatives
       globalLabel = thePedeLabels->calibrationLabel(*iCalib, iValuesInd->second);
       if (globalLabel > 0 && globalLabel <= 2147483647) {
         theIntBuffer.push_back(globalLabel);
         theDoubleBufferX.push_back(iValuesInd->first.first);
         theDoubleBufferY.push_back(iValuesInd->first.second);
       } else {
         std::cerr << "MillePedeAlignmentAlgorithm::addGlobalData: Invalid label " << globalLabel << " <= 0 or > 2147483647" << std::endl;
       }
     }
   }
   unsigned int numGlobals = theIntBuffer.size();
   if (numGlobals > 0)
   {
     TMatrixD globalDer(2,numGlobals);
     for (unsigned int i = 0; i < numGlobals; ++i) {
       globalDer(0,i) = theDoubleBufferX[i];
       globalDer(1,i) = theDoubleBufferY[i];
     }
     gblPoint.addGlobals( theIntBuffer, globalDer );
     iret = 1;
   }
   return iret;
 }

unsigned int MillePedeAlignmentAlgorithm::addHitCount	(	const std::vector< AlignmentParameters * > &	parVec,
		const std::vector< bool > &	validHitVecY
	)		const

private

Increase hit counting of MillePedeVariables behind each parVec[i] (and also for parameters higher in hierarchy), assuming 'parVec' and 'validHitVecY' to be parallel. Returns number of valid y-hits.

Definition at line 435 of file MillePedeAlignmentAlgorithm.cc.

References Alignable::alignmentParameters(), MillePedeVariables::increaseHitsX(), MillePedeVariables::increaseHitsY(), Alignable::mother(), and AlignmentParameters::userVariables().

Referenced by addReferenceTrajectory().

 {
   // Loop on all hit information in the input arrays and count valid y-hits:
   unsigned int nHitY = 0;
   for (unsigned int iHit = 0; iHit < validHitVecY.size(); ++iHit) {
     Alignable *ali = (parVec[iHit] ? parVec[iHit]->alignable() : 0);
     // Loop upwards on hierarchy of alignables to add hits to all levels 
     // that are currently aligned. If only a non-selected alignable was hit,
     // (i.e. flagXY == 0 in addReferenceTrajectory(..)), there is no loop at all...
     while (ali) {
       AlignmentParameters *pars = ali->alignmentParameters();
       if (pars) { // otherwise hierarchy level not selected
     // cast ensured by previous checks:
     MillePedeVariables *mpVar = static_cast<MillePedeVariables*>(pars->userVariables());
     // every hit has an x-measurement, cf. addReferenceTrajectory(..):
     mpVar->increaseHitsX();
     if (validHitVecY[iHit]) {
       mpVar->increaseHitsY();
       if (pars == parVec[iHit]) ++nHitY; // do not count hits twice
     }
       }
       ali = ali->mother();
     }
   }
   
   return nHitY;
 }

bool MillePedeAlignmentAlgorithm::addHits	(	const std::vector< Alignable * > &	alis,
		const std::vector< AlignmentUserVariables * > &	mpVars
	)		const

private

Definition at line 955 of file MillePedeAlignmentAlgorithm.cc.

References MillePedeVariables::hitsX(), MillePedeVariables::hitsY(), MillePedeVariables::increaseHitsX(), MillePedeVariables::increaseHitsY(), MillePedeVariables::size(), and AlignmentParameters::userVariables().

Referenced by addHitStatistics().

 {
   bool allOk = (mpVars.size() == alis.size());
   std::vector<AlignmentUserVariables*>::const_iterator iUser = mpVars.begin();
   for (std::vector<Alignable*>::const_iterator iAli = alis.begin(); 
        iAli != alis.end() && iUser != mpVars.end(); ++iAli, ++iUser) {
     MillePedeVariables *mpVarNew = dynamic_cast<MillePedeVariables*>(*iUser);
     AlignmentParameters *ps = (*iAli)->alignmentParameters();
     MillePedeVariables *mpVarOld = (ps ? dynamic_cast<MillePedeVariables*>(ps->userVariables()) : 0);
     if (!mpVarNew || !mpVarOld || mpVarOld->size() != mpVarNew->size()) {
       allOk = false;
       continue; // FIXME error etc.?
     }
 
     mpVarOld->increaseHitsX(mpVarNew->hitsX());
     mpVarOld->increaseHitsY(mpVarNew->hitsY());
   }
   
   return allOk;
 }

bool MillePedeAlignmentAlgorithm::addHitStatistics	(	int	fromLoop,
		const std::string &	outFile,
		const std::vector< std::string > &	inFiles
	)		const

private

Definition at line 928 of file MillePedeAlignmentAlgorithm.cc.

References addHits(), i, MillePedeVariablesIORoot::readMillePedeVariables(), AlCaHLTBitMon_QueryRunRegistry::string, theAlignables, and theDir.

Referenced by doIO().

 {
   bool allOk = true;
   int ierr = 0;
   MillePedeVariablesIORoot millePedeIO;
   for (std::vector<std::string>::const_iterator iFile = inFiles.begin();
        iFile != inFiles.end(); ++iFile) {
     const std::string inFile(theDir + *iFile); 
     const std::vector<AlignmentUserVariables*> mpVars =
       millePedeIO.readMillePedeVariables(theAlignables, inFile.c_str(), fromIov, ierr);
     if (ierr || !this->addHits(theAlignables, mpVars)) {
       edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::addHitStatistics"
                  << "Error " << ierr << " reading from " << inFile 
                  << ", tree " << fromIov << ", or problems in addHits";
       allOk = false;
     }
     for (std::vector<AlignmentUserVariables*>::const_iterator i = mpVars.begin();
      i != mpVars.end(); ++i) {
       delete *i; // clean created objects
     }
   }
 
   return allOk;
 }

void MillePedeAlignmentAlgorithm::addLasBeam	(	const EventInfo &	eventInfo,
		const TkFittedLasBeam &	lasBeam,
		const std::vector< TrajectoryStateOnSurface > &	tsoses
	)

private

Definition at line 1263 of file MillePedeAlignmentAlgorithm.cc.

References AlignableNavigator::alignableFromDetId(), funct::derivative(), TkFittedLasBeam::derivatives(), Mille::end(), relativeConstraints::error, TkFittedLasBeam::firstFixedParameter(), TkLasBeam::getBeamId(), TkLasBeam::getData(), SiStripLaserRecHit2D::getDetId(), globalDerivativesHierarchy(), PedeLabelerBase::lasBeamLabel(), SiStripLaserRecHit2D::localPosition(), Mille::mille(), PedeLabelerBase::parameterLabel(), TkFittedLasBeam::parameters(), theAlignableNavigator, theFloatBufferX, theFloatBufferY, theIntBuffer, theMille, and thePedeLabels.

Referenced by addLaserData().

 {
   AlignmentParameters *dummyPtr = 0; // for globalDerivativesHierarchy()
   std::vector<float> lasLocalDerivsX; // buffer for local derivatives
   const unsigned int beamLabel = thePedeLabels->lasBeamLabel(lasBeam.getBeamId());// for global par
   
   for (unsigned int iHit = 0; iHit < tsoses.size(); ++iHit) {
     if (!tsoses[iHit].isValid()) continue;
     // clear buffer
     theFloatBufferX.clear();
     theFloatBufferY.clear();
     theIntBuffer.clear();
     lasLocalDerivsX.clear();
     // get alignables and global parameters
     const SiStripLaserRecHit2D &hit = lasBeam.getData()[iHit];
     AlignableDetOrUnitPtr lasAli(theAlignableNavigator->alignableFromDetId(hit.getDetId()));
     this->globalDerivativesHierarchy(eventInfo,
                      tsoses[iHit], lasAli, lasAli, 
                      theFloatBufferX, theFloatBufferY, theIntBuffer, dummyPtr);
     // fill derivatives vector from derivatives matrix
     for (unsigned int nFitParams = 0; 
      nFitParams < static_cast<unsigned int>(lasBeam.parameters().size()); 
      ++nFitParams) {
       const float derivative = lasBeam.derivatives()[iHit][nFitParams];
       if (nFitParams < lasBeam.firstFixedParameter()) { // first local beam parameters
     lasLocalDerivsX.push_back(derivative);
       } else {                                          // now global ones
     const unsigned int numPar = nFitParams - lasBeam.firstFixedParameter();
     theIntBuffer.push_back(thePedeLabels->parameterLabel(beamLabel, numPar));
     theFloatBufferX.push_back(derivative);
       }
     } // end loop over parameters
 
     const float residual = hit.localPosition().x() - tsoses[iHit].localPosition().x();
     // error from file or assume 0.003
     const float error = 0.003; // hit.localPositionError().xx(); sqrt???
     
     theMille->mille(lasLocalDerivsX.size(), &(lasLocalDerivsX[0]), theFloatBufferX.size(),
             &(theFloatBufferX[0]), &(theIntBuffer[0]), residual, error);
   } // end of loop over hits
   
   theMille->end();
 }

void MillePedeAlignmentAlgorithm::addLaserData	(	const EventInfo &	eventInfo,
		const TkFittedLasBeamCollection &	tkLasBeams,
		const TsosVectorCollection &	tkLasBeamTsoses
	)

private

Definition at line 1244 of file MillePedeAlignmentAlgorithm.cc.

References addLasBeam().

Referenced by endRun().

 {
   TsosVectorCollection::const_iterator iTsoses = lasBeamTsoses.begin();
   for(TkFittedLasBeamCollection::const_iterator iBeam = lasBeams.begin(), iEnd = lasBeams.end();
       iBeam != iEnd; ++iBeam, ++iTsoses){ // beam/tsoses parallel!
 
     edm::LogInfo("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::addLaserData"
                   << "Beam " << iBeam->getBeamId() << " with " 
                   << iBeam->parameters().size() << " parameters and " 
                   << iBeam->getData().size() << " hits.\n There are " 
                   << iTsoses->size() << " TSOSes.";
 
     this->addLasBeam(eventInfo, *iBeam, *iTsoses);
   }
 }

int MillePedeAlignmentAlgorithm::addMeasurementData	(	const edm::EventSetup &	setup,
		const EventInfo &	eventInfo,
		const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iHit,
		AlignmentParameters *&	params
	)

private

If hit is usable: callMille for x and (probably) y direction. If globalDerivatives fine: returns 2 if 2D-hit, 1 if 1D-hit, 0 if no Alignable for hit. Returns -1 if any problem (for params cf. globalDerivativesHierarchy)

Definition at line 475 of file MillePedeAlignmentAlgorithm.cc.

References AlignableNavigator::alignableFromDetId(), callMille(), globalDerivativesCalibration(), globalDerivativesHierarchy(), theAlignableNavigator, theFloatBufferX, theFloatBufferY, and theIntBuffer.

Referenced by addReferenceTrajectory().

 {
   params = 0;
   theFloatBufferX.clear();
   theFloatBufferY.clear();
   theIntBuffer.clear();
  
   const TrajectoryStateOnSurface &tsos = refTrajPtr->trajectoryStates()[iHit];
   const ConstRecHitPointer &recHitPtr = refTrajPtr->recHits()[iHit];
   // ignore invalid hits
   if (!recHitPtr->isValid()) return 0;
 
   // First add the derivatives from IntegratedCalibration's,
   // should even be OK if problems for "usual" derivatives from Alignables
   this->globalDerivativesCalibration(recHitPtr, tsos, setup, eventInfo, // input
                                      theFloatBufferX, theFloatBufferY, theIntBuffer); // output
 
   // get AlignableDet/Unit for this hit
   AlignableDetOrUnitPtr alidet(theAlignableNavigator->alignableFromDetId(recHitPtr->geographicalId()));
   
   if (!this->globalDerivativesHierarchy(eventInfo,
                     tsos, alidet, alidet, theFloatBufferX, // 2x alidet, sic!
                     theFloatBufferY, theIntBuffer, params)) {
     return -1; // problem
   } else if (theFloatBufferX.empty()) {
      return 0; // empty for X: no alignable for hit, nor calibrations
   } else { // now even if no alignable, but calibrations!
     return this->callMille(refTrajPtr, iHit, theIntBuffer, theFloatBufferX, theFloatBufferY);
   }
 }

void MillePedeAlignmentAlgorithm::addPxbSurvey ( const edm::ParameterSet & pxbSurveyCfg )

private

add measurement data from PXB survey

Definition at line 1309 of file MillePedeAlignmentAlgorithm.cc.

References a, AlignableNavigator::alignableFromDetId(), PedeLabelerBase::alignableLabel(), gather_cfg::cout, SurveyPxbDicer::doDice(), Mille::end(), lut2db_cfg::filename, MillePedeMonitor::fillPxbSurveyHistsChi2(), MillePedeMonitor::fillPxbSurveyHistsLocalPars(), edm::FileInPath::fullPath(), edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), i, j, Mille::mille(), SurveyPxbImageLocalFit::nMsrmts, getDQMSummary::outfile, matplotRender::reader, mathSSE::sqrt(), AlCaHLTBitMon_QueryRunRegistry::string, Alignable::surface(), theAlignableNavigator, theMille, theMonitor, thePedeLabels, AlignableSurface::toGlobal(), and AlignableSurface::toLocal().

Referenced by initialize().

 {
     // do some printing, if requested
     const bool doOutputOnStdout(pxbSurveyCfg.getParameter<bool>("doOutputOnStdout"));
     if (doOutputOnStdout) std::cout << "# Output from addPxbSurvey follows below because doOutputOnStdout is set to True" << std::endl;
 
     // instantiate a dicer object
     SurveyPxbDicer dicer(pxbSurveyCfg.getParameter<std::vector<edm::ParameterSet> >("toySurveyParameters"), pxbSurveyCfg.getParameter<unsigned int>("toySurveySeed"));
     std::ofstream outfile(pxbSurveyCfg.getUntrackedParameter<std::string>("toySurveyFile").c_str());
 
     // read data from file
     std::vector<SurveyPxbImageLocalFit> measurements;
     std::string filename(pxbSurveyCfg.getParameter<edm::FileInPath>("infile").fullPath());
     SurveyPxbImageReader<SurveyPxbImageLocalFit> reader(filename, measurements, 800);
 
     // loop over photographs (=measurements) and perform the fit
     for(std::vector<SurveyPxbImageLocalFit>::size_type i=0; i!=measurements.size(); i++)
     {
         if (doOutputOnStdout) std::cout << "Module " << i << ": ";
 
         // get the Alignables and their surfaces
         AlignableDetOrUnitPtr mod1(theAlignableNavigator->alignableFromDetId(measurements[i].getIdFirst()));
         AlignableDetOrUnitPtr mod2(theAlignableNavigator->alignableFromDetId(measurements[i].getIdSecond()));
         const AlignableSurface& surf1 = mod1->surface();
         const AlignableSurface& surf2 = mod2->surface();
         
         // the position of the fiducial points in local frame of a PXB module
         const LocalPoint fidpoint0(-0.91,+3.30);
         const LocalPoint fidpoint1(+0.91,+3.30);
         const LocalPoint fidpoint2(+0.91,-3.30);
         const LocalPoint fidpoint3(-0.91,-3.30);
         
         // We choose the local frame of the first module as reference,
         // so take the fidpoints of the second module and calculate their
         // positions in the reference frame
         const GlobalPoint surf2point0(surf2.toGlobal(fidpoint0));
         const GlobalPoint surf2point1(surf2.toGlobal(fidpoint1));
         const LocalPoint fidpoint0inSurf1frame(surf1.toLocal(surf2point0));
         const LocalPoint fidpoint1inSurf1frame(surf1.toLocal(surf2point1));
         
         // Create the vector for the fit
         SurveyPxbImageLocalFit::fidpoint_t fidpointvec;
         fidpointvec.push_back(fidpoint0inSurf1frame);
         fidpointvec.push_back(fidpoint1inSurf1frame);
         fidpointvec.push_back(fidpoint2);
         fidpointvec.push_back(fidpoint3);
 
         // if toy survey is requested, dice the values now
         if (pxbSurveyCfg.getParameter<bool>("doToySurvey"))
         {
             dicer.doDice(fidpointvec,measurements[i].getIdPair(), outfile);
         }
         
         // do the fit
         measurements[i].doFit(fidpointvec, thePedeLabels->alignableLabel(mod1), thePedeLabels->alignableLabel(mod2));
         SurveyPxbImageLocalFit::localpars_t a; // local pars from fit
         a = measurements[i].getLocalParameters();
         const SurveyPxbImageLocalFit::value_t chi2 = measurements[i].getChi2();
 
         // do some reporting, if requested
         if (doOutputOnStdout)
         {
           std::cout << "a: " << a[0] << ", " << a[1]  << ", " << a[2] << ", " << a[3]
             << " S= " << sqrt(a[2]*a[2]+a[3]*a[3])
             << " phi= " << atan(a[3]/a[2])
             << " chi2= " << chi2 << std::endl;
         }
         if (theMonitor) 
         {
             theMonitor->fillPxbSurveyHistsChi2(chi2);
             theMonitor->fillPxbSurveyHistsLocalPars(a[0],a[1],sqrt(a[2]*a[2]+a[3]*a[3]),atan(a[3]/a[2]));
         }
 
         // pass the results from the local fit to mille
         for(SurveyPxbImageLocalFit::count_t j=0; j!=SurveyPxbImageLocalFit::nMsrmts; j++)
         {
             theMille->mille((int)measurements[i].getLocalDerivsSize(),
                 measurements[i].getLocalDerivsPtr(j),
                 (int)measurements[i].getGlobalDerivsSize(),
                 measurements[i].getGlobalDerivsPtr(j),
                 measurements[i].getGlobalDerivsLabelPtr(j),
                 measurements[i].getResiduum(j),
                 measurements[i].getSigma(j));
         }
         theMille->end();
     }
     outfile.close();
 }

std::pair< unsigned int, unsigned int > MillePedeAlignmentAlgorithm::addReferenceTrajectory	(	const edm::EventSetup &	setup,
		const EventInfo &	eventInfo,
		const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr
	)

private

fill mille for a trajectory, returning number of x/y hits ([0,0] if 'bad' trajectory)

Definition at line 349 of file MillePedeAlignmentAlgorithm.cc.

References addGlobalData(), addHitCount(), addMeasurementData(), addVirtualMeas(), Mille::end(), Mille::kill(), gbl::GblTrajectory::milleOut(), theBinary, theMille, and theMinNumHits.

Referenced by run().

 {
   std::pair<unsigned int, unsigned int> hitResultXy(0,0);
   if (refTrajPtr->isValid()) {
     
 
     // GblTrajectory?
     if (refTrajPtr->gblInput().size() > 0) {
       // by construction: number of GblPoints == number of recHits or == zero !!!
       unsigned int iHit = 0;
       unsigned int numPointsWithMeas = 0;
       std::vector<GblPoint>::iterator itPoint;
       std::vector<std::pair<std::vector<GblPoint>, TMatrixD> > theGblInput = refTrajPtr->gblInput();
       for (unsigned int iTraj = 0; iTraj < refTrajPtr->gblInput().size(); ++iTraj) {
         for (itPoint = refTrajPtr->gblInput()[iTraj].first.begin(); itPoint < refTrajPtr->gblInput()[iTraj].first.end(); ++itPoint) {
           if (this->addGlobalData(setup, eventInfo, refTrajPtr, iHit++, *itPoint) < 0) return hitResultXy;
           if (itPoint->hasMeasurement() >= 1) ++numPointsWithMeas;
         }
       }
       hitResultXy.first = numPointsWithMeas;
       // check #hits criterion
       if (hitResultXy.first == 0 || hitResultXy.first < theMinNumHits) return hitResultXy;
       // construct GBL trajectory
       if (refTrajPtr->gblInput().size() == 1) {
         // from single track
         GblTrajectory aGblTrajectory( refTrajPtr->gblInput()[0].first, refTrajPtr->nominalField() != 0 );
         // GBL fit trajectory
         /*double Chi2;
         int Ndf;
         double lostWeight;
         aGblTrajectory.fit(Chi2, Ndf, lostWeight);
         std::cout << " GblFit: " << Chi2 << ", " << Ndf << ", " << lostWeight << std::endl; */
         // write to MP binary file
         if (aGblTrajectory.isValid() && aGblTrajectory.getNumPoints() >= theMinNumHits) aGblTrajectory.milleOut(*theBinary);
       }
       if (refTrajPtr->gblInput().size() == 2) {
         // from TwoBodyDecay
         GblTrajectory aGblTrajectory( refTrajPtr->gblInput(), refTrajPtr->gblExtDerivatives(), refTrajPtr->gblExtMeasurements(), refTrajPtr->gblExtPrecisions() );
         // write to MP binary file
         if (aGblTrajectory.isValid() && aGblTrajectory.getNumPoints() >= theMinNumHits) aGblTrajectory.milleOut(*theBinary);
       }
     } else {
       // to add hits if all fine:
       std::vector<AlignmentParameters*> parVec(refTrajPtr->recHits().size());
       // collect hit statistics, assuming that there are no y-only hits
       std::vector<bool> validHitVecY(refTrajPtr->recHits().size(), false);
       // Use recHits from ReferenceTrajectory (since they have the right order!):
       for (unsigned int iHit = 0; iHit < refTrajPtr->recHits().size(); ++iHit) {
         const int flagXY = this->addMeasurementData(setup, eventInfo, refTrajPtr, iHit, parVec[iHit]);
 
         if (flagXY < 0) { // problem
           hitResultXy.first = 0;
           break;
         } else { // hit is fine, increase x/y statistics
           if (flagXY >= 1) ++hitResultXy.first;
           validHitVecY[iHit] = (flagXY >= 2);
         }
       } // end loop on hits
 
       // add virtual measurements
       for (unsigned int iVirtualMeas = 0; iVirtualMeas < refTrajPtr->numberOfVirtualMeas(); ++iVirtualMeas) {
         this->addVirtualMeas(refTrajPtr, iVirtualMeas);
       }
 
       // kill or end 'track' for mille, depends on #hits criterion
       if (hitResultXy.first == 0 || hitResultXy.first < theMinNumHits) {
         theMille->kill();
         hitResultXy.first = hitResultXy.second = 0; //reset
       } else {
         theMille->end();
         // add x/y hit count to MillePedeVariables of parVec,
         // returning number of y-hits of the reference trajectory
         hitResultXy.second = this->addHitCount(parVec, validHitVecY);
         //
       }
     }
 
   } // end if valid trajectory
 
   return hitResultXy;
 }

void MillePedeAlignmentAlgorithm::addRefTrackData2D	(	const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iTrajHit,
		TMatrixDSym &	aHitCovarianceM,
		TMatrixF &	aHitResidualsM,
		TMatrixF &	aLocalDerivativesM
	)

private

adds data from reference trajectory from a specific Hit

Definition at line 1043 of file MillePedeAlignmentAlgorithm.cc.

References i.

 {
   // This Method is valid for 2D measurements only
   
   const unsigned int xIndex = iTrajHit*2;
   const unsigned int yIndex = iTrajHit*2+1;
   // Covariance into a TMatrixDSym
 
   //aHitCovarianceM = new TMatrixDSym(2);
   aHitCovarianceM(0,0)=refTrajPtr->measurementErrors()[xIndex][xIndex];
   aHitCovarianceM(0,1)=refTrajPtr->measurementErrors()[xIndex][yIndex];
   aHitCovarianceM(1,0)=refTrajPtr->measurementErrors()[yIndex][xIndex];
   aHitCovarianceM(1,1)=refTrajPtr->measurementErrors()[yIndex][yIndex];
   
   //theHitResidualsM= new TMatrixF(2,1);
   aHitResidualsM(0,0)= refTrajPtr->measurements()[xIndex] - refTrajPtr->trajectoryPositions()[xIndex];
   aHitResidualsM(1,0)= refTrajPtr->measurements()[yIndex] - refTrajPtr->trajectoryPositions()[yIndex];
   
   // Local Derivatives into a TMatrixDSym (to use matrix operations)
   const AlgebraicMatrix &locDerivMatrix = refTrajPtr->derivatives();
   //  theLocalDerivativeNumber = locDerivMatrix.num_col();
   
   //theLocalDerivativesM = new TMatrixF(2,locDerivMatrix.num_col());
   for (int i = 0; i < locDerivMatrix.num_col(); ++i) {
     aLocalDerivativesM(0,i) = locDerivMatrix[xIndex][i];
     aLocalDerivativesM(1,i) = locDerivMatrix[yIndex][i];
   }
 }

void MillePedeAlignmentAlgorithm::addRefTrackVirtualMeas1D	(	const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iVirtualMeas,
		TMatrixDSym &	aHitCovarianceM,
		TMatrixF &	aHitResidualsM,
		TMatrixF &	aLocalDerivativesM
	)

private

adds data for a specific virtual measurement from reference trajectory

Definition at line 1016 of file MillePedeAlignmentAlgorithm.cc.

References i.

 {
   // This Method is valid for 1D measurements only
 
   const unsigned int xIndex = iVirtualMeas + refTrajPtr->numberOfHitMeas();
   // Covariance into a TMatrixDSym
   
   //aHitCovarianceM = new TMatrixDSym(1);
   aHitCovarianceM(0,0)=refTrajPtr->measurementErrors()[xIndex][xIndex];
   
   //theHitResidualsM= new TMatrixF(1,1);
   aHitResidualsM(0,0)= refTrajPtr->measurements()[xIndex];
   
   // Local Derivatives into a TMatrixDSym (to use matrix operations)
   const AlgebraicMatrix &locDerivMatrix = refTrajPtr->derivatives();
   //  theLocalDerivativeNumber = locDerivMatrix.num_col();
   
   //theLocalDerivativesM = new TMatrixF(1,locDerivMatrix.num_col());
   for (int i = 0; i < locDerivMatrix.num_col(); ++i) {
     aLocalDerivativesM(0,i) = locDerivMatrix[xIndex][i];
   }
 }

void MillePedeAlignmentAlgorithm::addVirtualMeas	(	const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iVirtualMeas
	)

private

adds data for virtual measurements from reference trajectory

Definition at line 1220 of file MillePedeAlignmentAlgorithm.cc.

Referenced by addReferenceTrajectory().

 {
   TMatrixDSym aHitCovarianceM(1);
   TMatrixF aHitResidualsM(1,1);
   TMatrixF aLocalDerivativesM(1, refTrajPtr->derivatives().num_col());
   // below method fills above 3 'matrices'
   this->addRefTrackVirtualMeas1D(refTrajPtr, iVirtualMeas, aHitCovarianceM, aHitResidualsM, aLocalDerivativesM);
   
   // no global parameters (use dummy 0)
   TMatrixF aGlobalDerivativesM(1,1);
   aGlobalDerivativesM(0,0) = 0;
       
   float newResidX = aHitResidualsM(0,0);  
   float newHitErrX = TMath::Sqrt(aHitCovarianceM(0,0));
   float *newLocalDerivsX = aLocalDerivativesM[0].GetPtr();
   float *newGlobDerivsX  = aGlobalDerivativesM[0].GetPtr();
   const int nLocal  = aLocalDerivativesM.GetNcols();
   const int nGlobal = 0;
   
   theMille->mille(nLocal, newLocalDerivsX, nGlobal, newGlobDerivsX,
           &nGlobal, newResidX, newHitErrX);  
 }

bool MillePedeAlignmentAlgorithm::areEmptyParams ( const std::vector< Alignable * > & alignables ) const

private

Definition at line 797 of file MillePedeAlignmentAlgorithm.cc.

References AlignmentParameters::covariance(), i, j, and AlignmentParameters::parameters().

Referenced by readFromPede().

 {
   
   for (std::vector<Alignable*>::const_iterator iAli = alignables.begin();
        iAli != alignables.end(); ++iAli) {
     const AlignmentParameters *params = (*iAli)->alignmentParameters();
     if (params) {
       const AlgebraicVector &parVec(params->parameters());
       const AlgebraicMatrix &parCov(params->covariance());
       for (int i = 0; i < parVec.num_row(); ++i) {
         if (parVec[i] != 0.) return false;
         for (int j = i; j < parCov.num_col(); ++j) {
           if (parCov[i][j] != 0.) return false;
         }
       }
     }
   }
   
   return true;
 }

void MillePedeAlignmentAlgorithm::buildUserVariables ( const std::vector< Alignable * > & alignables ) const

private

add MillePedeVariables for each AlignmentParameters (exception if no parameters...)

Definition at line 879 of file MillePedeAlignmentAlgorithm.cc.

References PedeLabelerBase::alignableLabel(), edm::hlt::Exception, MillePedeVariables::setAllDefault(), AlignmentParameters::setUserVariables(), MillePedeVariables::size(), AlignmentParameters::size(), thePedeLabels, and AlignmentParameters::userVariables().

Referenced by initialize(), and setParametersForRunRange().

 {
   for (std::vector<Alignable*>::const_iterator iAli = alis.begin(); iAli != alis.end(); ++iAli) {
     AlignmentParameters *params = (*iAli)->alignmentParameters();
     if (!params) {
       throw cms::Exception("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::buildUserVariables"
                                         << "No parameters for alignable";
     }
     MillePedeVariables *userVars = dynamic_cast<MillePedeVariables*>(params->userVariables()); 
     if (userVars) { // Just re-use existing, keeping label and numHits:
       for (unsigned int iPar = 0; iPar < userVars->size(); ++iPar) {
     //  if (params->hierarchyLevel() > 0) {
     //std::cout << params->hierarchyLevel() << "\nBefore: " << userVars->parameter()[iPar];
     //  }
     userVars->setAllDefault(iPar);
     //std::cout << "\nAfter: " << userVars->parameter()[iPar] << std::endl;
       }
     } else { // Nothing yet or erase wrong type:
       userVars = new MillePedeVariables(params->size(), thePedeLabels->alignableLabel(*iAli));
       params->setUserVariables(userVars);
     }
   }
 }

int MillePedeAlignmentAlgorithm::callMille	(	const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iTrajHit,
		const std::vector< int > &	globalLabels,
		const std::vector< float > &	globalDerivativesX,
		const std::vector< float > &	globalDerivativesY
	)

private

calls callMille1D or callMille2D

Definition at line 1076 of file MillePedeAlignmentAlgorithm.cc.

Referenced by addMeasurementData().

 {    
   const ConstRecHitPointer aRecHit(refTrajPtr->recHits()[iTrajHit]);
 
   if((aRecHit)->dimension() == 1) {
     return this->callMille1D(refTrajPtr, iTrajHit, globalLabels, globalDerivativesX);
   } else {
     return this->callMille2D(refTrajPtr, iTrajHit, globalLabels,
                  globalDerivativesX, globalDerivativesY);
   }
 }

int MillePedeAlignmentAlgorithm::callMille1D	(	const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iTrajHit,
		const std::vector< int > &	globalLabels,
		const std::vector< float > &	globalDerivativesX
	)

private

calls Mille for 1D hits

Definition at line 1094 of file MillePedeAlignmentAlgorithm.cc.

References i.

 {
   const ConstRecHitPointer aRecHit(refTrajPtr->recHits()[iTrajHit]);
   const unsigned int xIndex = iTrajHit*2; // the even ones are local x
 
   // local derivatives
   const AlgebraicMatrix &locDerivMatrix = refTrajPtr->derivatives();
   const int nLocal  = locDerivMatrix.num_col();
   std::vector<float> localDerivatives(nLocal);
   for (unsigned int i = 0; i < localDerivatives.size(); ++i) {
     localDerivatives[i] = locDerivMatrix[xIndex][i];
   }
 
   // residuum and error
   float residX = refTrajPtr->measurements()[xIndex] - refTrajPtr->trajectoryPositions()[xIndex];
   float hitErrX = TMath::Sqrt(refTrajPtr->measurementErrors()[xIndex][xIndex]);
 
   // number of global derivatives
   const int nGlobal = globalDerivativesX.size();
 
   // &(localDerivatives[0]) etc. are valid - as long as vector is not empty
   // cf. http://www.parashift.com/c++-faq-lite/containers.html#faq-34.3
   theMille->mille(nLocal, &(localDerivatives[0]), nGlobal, &(globalDerivativesX[0]),
           &(globalLabels[0]), residX, hitErrX);
 
   if (theMonitor) {
     theMonitor->fillDerivatives(aRecHit, &(localDerivatives[0]), nLocal,
                 &(globalDerivativesX[0]), nGlobal, &(globalLabels[0]));
     theMonitor->fillResiduals(aRecHit, refTrajPtr->trajectoryStates()[iTrajHit],
                   iTrajHit, residX, hitErrX, false);
   }
 
   return 1;
 }

int MillePedeAlignmentAlgorithm::callMille2D	(	const ReferenceTrajectoryBase::ReferenceTrajectoryPtr &	refTrajPtr,
		unsigned int	iTrajHit,
		const std::vector< int > &	globalLabels,
		const std::vector< float > &	globalDerivativesx,
		const std::vector< float > &	globalDerivativesy
	)

private

calls Mille for x and possibly y component of hit, y is skipped for non-real 2D (e.g. SiStripRecHit2D), for TID/TEC first diagonalises if correlation is larger than configurable

Definition at line 1133 of file MillePedeAlignmentAlgorithm.cc.

References Abs(), corr, pat::helper::ParametrizationHelper::dimension(), mathSSE::sqrt(), std::swap(), SiStripDetId::TEC, SiStripDetId::TID, and DetId::Tracker.

 {
   const ConstRecHitPointer aRecHit(refTrajPtr->recHits()[iTrajHit]);
   
   if((aRecHit)->dimension() != 2) {
     edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::callMille2D"
                                << "You try to call method for 2D hits for a " 
                                << (aRecHit)->dimension()
                                <<  "D Hit. Hit gets ignored!";
     return -1;
   }
 
   TMatrixDSym aHitCovarianceM(2);
   TMatrixF aHitResidualsM(2,1);
   TMatrixF aLocalDerivativesM(2, refTrajPtr->derivatives().num_col());
   // below method fills above 3 matrices
   this->addRefTrackData2D(refTrajPtr, iTrajHit, aHitCovarianceM,aHitResidualsM,aLocalDerivativesM);
   TMatrixF aGlobalDerivativesM(2,globalDerivativesx.size());
   this->makeGlobDerivMatrix(globalDerivativesx, globalDerivativesy, aGlobalDerivativesM);
  
   // calculates correlation between Hit measurements
   // FIXME: Should take correlation (and resulting transformation) from original hit, 
   //        not 2x2 matrix from ReferenceTrajectory: That can come from error propagation etc.!
   const double corr = aHitCovarianceM(0,1) / sqrt(aHitCovarianceM(0,0) * aHitCovarianceM(1,1));
   if (theMonitor) theMonitor->fillCorrelations2D(corr, aRecHit);
   bool diag = false; // diagonalise only tracker TID, TEC
   switch(aRecHit->geographicalId().subdetId()) {
   case SiStripDetId::TID:
   case SiStripDetId::TEC:
     if (aRecHit->geographicalId().det() == DetId::Tracker && TMath::Abs(corr) > theMaximalCor2D) {
       this->diagonalize(aHitCovarianceM, aLocalDerivativesM, aHitResidualsM, aGlobalDerivativesM);
       diag = true;
     }
     break;
   default:;
   }
 
   float newResidX = aHitResidualsM(0,0);
   float newResidY = aHitResidualsM(1,0);
   float newHitErrX = TMath::Sqrt(aHitCovarianceM(0,0));
   float newHitErrY = TMath::Sqrt(aHitCovarianceM(1,1));
   float *newLocalDerivsX = aLocalDerivativesM[0].GetPtr();
   float *newLocalDerivsY = aLocalDerivativesM[1].GetPtr();
   float *newGlobDerivsX  = aGlobalDerivativesM[0].GetPtr();
   float *newGlobDerivsY  = aGlobalDerivativesM[1].GetPtr();
   const int nLocal  = aLocalDerivativesM.GetNcols();
   const int nGlobal = aGlobalDerivativesM.GetNcols();
 
   if (diag && (newHitErrX > newHitErrY)) { // also for 2D hits?
     // measurement with smaller error is x-measurement (for !is2D do not fill y-measurement):
     std::swap(newResidX, newResidY);
     std::swap(newHitErrX, newHitErrY);
     std::swap(newLocalDerivsX, newLocalDerivsY);
     std::swap(newGlobDerivsX, newGlobDerivsY);
   }
 
   // &(globalLabels[0]) is valid - as long as vector is not empty 
   // cf. http://www.parashift.com/c++-faq-lite/containers.html#faq-34.3
   theMille->mille(nLocal, newLocalDerivsX, nGlobal, newGlobDerivsX,
           &(globalLabels[0]), newResidX, newHitErrX);
 
   if (theMonitor) {
     theMonitor->fillDerivatives(aRecHit, newLocalDerivsX, nLocal, newGlobDerivsX, nGlobal,
                 &(globalLabels[0]));
     theMonitor->fillResiduals(aRecHit, refTrajPtr->trajectoryStates()[iTrajHit],
                   iTrajHit, newResidX, newHitErrX, false);
   }
   const bool isReal2DHit = this->is2D(aRecHit); // strip is 1D (except matched hits)
   if (isReal2DHit) {
     theMille->mille(nLocal, newLocalDerivsY, nGlobal, newGlobDerivsY,
                     &(globalLabels[0]), newResidY, newHitErrY);
     if (theMonitor) {
       theMonitor->fillDerivatives(aRecHit, newLocalDerivsY, nLocal, newGlobDerivsY, nGlobal,
                   &(globalLabels[0]));
       theMonitor->fillResiduals(aRecHit, refTrajPtr->trajectoryStates()[iTrajHit],
                 iTrajHit, newResidY, newHitErrY, true);// true: y
     }
   }
 
   return (isReal2DHit ? 2 : 1);
 }

unsigned int MillePedeAlignmentAlgorithm::decodeMode ( const std::string & mode ) const

private

Definition at line 904 of file MillePedeAlignmentAlgorithm.cc.

References edm::hlt::Exception, myMilleBit, myPedeReadBit, myPedeRunBit, and myPedeSteerBit.

 {
   if (mode == "full") {
     return myMilleBit + myPedeSteerBit + myPedeRunBit + myPedeReadBit;
   } else if (mode == "mille") {
     return myMilleBit; // + myPedeSteerBit; // sic! Including production of steerig file. NO!
   } else if (mode == "pede") {
     return myPedeSteerBit + myPedeRunBit + myPedeReadBit;
   } else if (mode == "pedeSteer") {
     return myPedeSteerBit;
   } else if (mode == "pedeRun") {
     return myPedeSteerBit + myPedeRunBit + myPedeReadBit; // sic! Including steering and reading of result.
   } else if (mode == "pedeRead") {
     return myPedeReadBit;
   }
 
   throw cms::Exception("BadConfig") 
     << "Unknown mode '" << mode  
     << "', use 'full', 'mille', 'pede', 'pedeRun', 'pedeSteer' or 'pedeRead'.";
 
   return 0;
 }

void MillePedeAlignmentAlgorithm::diagonalize	(	TMatrixDSym &	aHitCovarianceM,
		TMatrixF &	aLocalDerivativesM,
		TMatrixF &	aHitResidualsM,
		TMatrixF &	theGlobalDerivativesM
	)		const

private

Definition at line 991 of file MillePedeAlignmentAlgorithm.cc.

 {
   TMatrixDSymEigen myDiag(aHitCovarianceM);
   TMatrixD aTranfoToDiagonalSystem = myDiag.GetEigenVectors();
   TMatrixD aTranfoToDiagonalSystemInv = myDiag.GetEigenVectors( );
   TMatrixF aTranfoToDiagonalSystemInvF = myDiag.GetEigenVectors( );
   TMatrixD aMatrix = aTranfoToDiagonalSystemInv.Invert() * aHitCovarianceM * aTranfoToDiagonalSystem;
   // Tranformation of matrix M is done by A^T*M*A, not A^{-1}*M*A.
   // But here A^T == A^{-1}, so we would only save CPU by Transpose()...
   // FIXME this - I guess simply use T(), not Transpose()...
   // TMatrixD aMatrix = aTranfoToDiagonalSystemInv.Transpose() * aHitCovarianceM
   //    * aTranfoToDiagonalSystem;
   aHitCovarianceM = TMatrixDSym(2, aMatrix.GetMatrixArray());
   aTranfoToDiagonalSystemInvF.Invert();
   //edm::LogInfo("Alignment") << "NEW HIT loca in matrix"<<aLocalDerivativesM(0,0);
   aLocalDerivativesM = aTranfoToDiagonalSystemInvF * aLocalDerivativesM;
   
   //edm::LogInfo("Alignment") << "NEW HIT loca in matrix after diag:"<<aLocalDerivativesM(0,0);
   aHitResidualsM      = aTranfoToDiagonalSystemInvF * aHitResidualsM;
   aGlobalDerivativesM = aTranfoToDiagonalSystemInvF * aGlobalDerivativesM;
 }

unsigned int MillePedeAlignmentAlgorithm::doIO ( int loop ) const

private

Definition at line 819 of file MillePedeAlignmentAlgorithm.cc.

References addHitStatistics(), edm::ParameterSet::getParameter(), cmsHarvester::loop, GetRecoTauVFromDQM_MC_cff::outFile, query::result, AlCaHLTBitMon_QueryRunRegistry::string, theAlignables, theConfig, theDir, AlignmentIORoot::writeAlignableAbsolutePositions(), AlignmentIORoot::writeAlignableOriginalPositions(), MillePedeVariablesIORoot::writeMillePedeVariables(), and AlignmentIORoot::writeOrigRigidBodyAlignmentParameters().

Referenced by setParametersForRunRange(), and terminate().

 {
   unsigned int result = 0;
 
   const std::string outFilePlain(theConfig.getParameter<std::string>("treeFile"));
   if (outFilePlain.empty()) {
     edm::LogInfo("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::doIO"
                               << "treeFile parameter empty => skip writing for 'loop' " << loop;
     return result;
   }
 
   const std::string outFile(theDir + outFilePlain);
 
   AlignmentIORoot aliIO;
   int ioerr = 0;
   if (loop == 0) {
     aliIO.writeAlignableOriginalPositions(theAlignables, outFile.c_str(), loop, false, ioerr);
     if (ioerr) {
       edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::doIO"
                                  << "Problem " << ioerr << " in writeAlignableOriginalPositions";
       ++result;
     }
   } else if (loop == 1) {
     // only for first iov add hit counts, else 2x, 3x,... number of hits in IOV 2, 3,...
     const std::vector<std::string> inFiles
       (theConfig.getParameter<std::vector<std::string> >("mergeTreeFiles"));
     const std::vector<std::string> binFiles
       (theConfig.getParameter<std::vector<std::string> >("mergeBinaryFiles"));
     if (inFiles.size() != binFiles.size()) {
       edm::LogWarning("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::doIO"
                                    << "'vstring mergeTreeFiles' and 'vstring mergeBinaryFiles' "
                                    << "differ in size";
     }
     this->addHitStatistics(0, outFile, inFiles); // add hit info from tree 0 in 'infiles'
   }
   MillePedeVariablesIORoot millePedeIO;
   millePedeIO.writeMillePedeVariables(theAlignables, outFile.c_str(), loop, false, ioerr);
   if (ioerr) {
     edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::doIO"
                                << "Problem " << ioerr << " writing MillePedeVariables";
     ++result;
   }
   
   aliIO.writeOrigRigidBodyAlignmentParameters(theAlignables, outFile.c_str(), loop, false, ioerr);
   if (ioerr) {
     edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::doIO" << "Problem " << ioerr
                    << " in writeOrigRigidBodyAlignmentParameters, " << loop;
     ++result;
   }
   aliIO.writeAlignableAbsolutePositions(theAlignables, outFile.c_str(), loop, false, ioerr);
   if (ioerr) {
     edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::doIO" << "Problem " << ioerr
                                << " in writeAlignableAbsolutePositions, " << loop;
     ++result;
   }
 
   return result;
 }

void MillePedeAlignmentAlgorithm::endRun	(	const EventInfo &	eventInfo,
		const EndRunInfo &	runInfo,
		const edm::EventSetup &	setup
	)

virtual

Run on run products, e.g. TkLAS.

Definition at line 465 of file MillePedeAlignmentAlgorithm.cc.

References addLaserData(), AlignmentAlgorithmBase::EndRunInfo::tkLasBeams(), and AlignmentAlgorithmBase::EndRunInfo::tkLasBeamTsoses().

 {
   if(runInfo.tkLasBeams() && runInfo.tkLasBeamTsoses()){
     // LAS beam treatment
     this->addLaserData(eventInfo, *(runInfo.tkLasBeams()), *(runInfo.tkLasBeamTsoses()));
   }
 }

void MillePedeAlignmentAlgorithm::globalDerivativesCalibration	(	const TransientTrackingRecHit::ConstRecHitPointer &	recHit,
		const TrajectoryStateOnSurface &	tsos,
		const edm::EventSetup &	setup,
		const EventInfo &	eventInfo,
		std::vector< float > &	globalDerivativesX,
		std::vector< float > &	globalDerivativesY,
		std::vector< int > &	globalLabels
	)		const

private

adding derivatives from integrated calibrations

Definition at line 686 of file MillePedeAlignmentAlgorithm.cc.

References PedeLabelerBase::calibrationLabel(), theCalibrations, and thePedeLabels.

Referenced by addMeasurementData().

 {
   std::vector<IntegratedCalibrationBase::ValuesIndexPair> derivs;
   for (auto iCalib = theCalibrations.begin(); iCalib != theCalibrations.end(); ++iCalib) {
     // get all derivatives of this calibration // const unsigned int num =
     (*iCalib)->derivatives(derivs, *recHit, tsos, setup, eventInfo);
     for (auto iValuesInd = derivs.begin(); iValuesInd != derivs.end(); ++iValuesInd) {
       // transfer label and x/y derivatives 
       globalLabels.push_back(thePedeLabels->calibrationLabel(*iCalib, iValuesInd->second));
       globalDerivativesX.push_back(iValuesInd->first.first);
       globalDerivativesY.push_back(iValuesInd->first.second);
     }
   }
 }

bool MillePedeAlignmentAlgorithm::globalDerivativesHierarchy	(	const EventInfo &	eventInfo,
		const TrajectoryStateOnSurface &	tsos,
		Alignable *	ali,
		const AlignableDetOrUnitPtr &	alidet,
		std::vector< float > &	globalDerivativesX,
		std::vector< float > &	globalDerivativesY,
		std::vector< int > &	globalLabels,
		AlignmentParameters *&	lowestParams
	)		const

private

recursively adding derivatives and labels, false if problems

Definition at line 570 of file MillePedeAlignmentAlgorithm.cc.

References Alignable::alignmentParameters(), AlignmentParameters::derivatives(), Alignable::mother(), and AlignmentParameters::selector().

Referenced by addGlobalData(), addLasBeam(), and addMeasurementData().

 {
   // derivatives and labels are recursively attached
   if (!ali) return true; // no mother might be OK
 
   if (false && theMonitor && alidet != ali) theMonitor->fillFrameToFrame(alidet, ali);
 
   AlignmentParameters *params = ali->alignmentParameters();
 
   if (params) {
     if (!lowestParams) lowestParams = params; // set parameters of lowest level
 
     bool hasSplitParameters = thePedeLabels->hasSplitParameters(ali);
     const unsigned int alignableLabel = thePedeLabels->alignableLabel(ali);
     
     if (0 == alignableLabel) { // FIXME: what about regardAllHits in Markus' code?
       edm::LogWarning("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::globalDerivativesHierarchy"
                                    << "Label not found, skip Alignable.";
       return false;
     }
     
     const std::vector<bool> &selPars = params->selector();
     const AlgebraicMatrix derivs(params->derivatives(tsos, alidet));
 
     // cols: 2, i.e. x&y, rows: parameters, usually RigidBodyAlignmentParameters::N_PARAM
     for (unsigned int iSel = 0; iSel < selPars.size(); ++iSel) {
       if (selPars[iSel]) {
         globalDerivativesX.push_back(derivs[iSel][kLocalX]
                      /thePedeSteer->cmsToPedeFactor(iSel));
     if (hasSplitParameters==true) {
       globalLabels.push_back(thePedeLabels->parameterLabel(ali, iSel, eventInfo, tsos));
     } else {
       globalLabels.push_back(thePedeLabels->parameterLabel(alignableLabel, iSel));
     }
     globalDerivativesY.push_back(derivs[iSel][kLocalY]
                      /thePedeSteer->cmsToPedeFactor(iSel));
       }
     }
     // Exclude mothers if Alignable selected to be no part of a hierarchy:
     if (thePedeSteer->isNoHiera(ali)) return true;
   }
   // Call recursively for mother, will stop if mother == 0:
   return this->globalDerivativesHierarchy(eventInfo,
                       tsos, ali->mother(), alidet,
                                           globalDerivativesX, globalDerivativesY,
                       globalLabels, lowestParams);
 }

bool MillePedeAlignmentAlgorithm::globalDerivativesHierarchy	(	const EventInfo &	eventInfo,
		const TrajectoryStateOnSurface &	tsos,
		Alignable *	ali,
		const AlignableDetOrUnitPtr &	alidet,
		std::vector< double > &	globalDerivativesX,
		std::vector< double > &	globalDerivativesY,
		std::vector< int > &	globalLabels,
		AlignmentParameters *&	lowestParams
	)		const

private

recursively adding derivatives (double) and labels, false if problems

Definition at line 626 of file MillePedeAlignmentAlgorithm.cc.

References Alignable::alignmentParameters(), ecal_dqm_sourceclient-live_cfg::cerr, AlignmentParameters::derivatives(), Alignable::mother(), and AlignmentParameters::selector().

 {
   // derivatives and labels are recursively attached
   if (!ali) return true; // no mother might be OK
 
   if (false && theMonitor && alidet != ali) theMonitor->fillFrameToFrame(alidet, ali);
 
   AlignmentParameters *params = ali->alignmentParameters();
 
   if (params) {
     if (!lowestParams) lowestParams = params; // set parameters of lowest level
 
     bool hasSplitParameters = thePedeLabels->hasSplitParameters(ali);
     const unsigned int alignableLabel = thePedeLabels->alignableLabel(ali);
 
     if (0 == alignableLabel) { // FIXME: what about regardAllHits in Markus' code?
       edm::LogWarning("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::globalDerivativesHierarchy"
                                    << "Label not found, skip Alignable.";
       return false;
     }
 
     const std::vector<bool> &selPars = params->selector();
     const AlgebraicMatrix derivs(params->derivatives(tsos, alidet));
     int globalLabel;
 
     // cols: 2, i.e. x&y, rows: parameters, usually RigidBodyAlignmentParameters::N_PARAM
     for (unsigned int iSel = 0; iSel < selPars.size(); ++iSel) {
       if (selPars[iSel]) {
         if (hasSplitParameters==true) {
           globalLabel = thePedeLabels->parameterLabel(ali, iSel, eventInfo, tsos);
         } else {
           globalLabel = thePedeLabels->parameterLabel(alignableLabel, iSel);
         }
         if (globalLabel > 0 && globalLabel <= 2147483647) {
           globalLabels.push_back(globalLabel);
           globalDerivativesX.push_back(derivs[iSel][kLocalX] / thePedeSteer->cmsToPedeFactor(iSel));
           globalDerivativesY.push_back(derivs[iSel][kLocalY] / thePedeSteer->cmsToPedeFactor(iSel));
         } else {
           std::cerr << "MillePedeAlignmentAlgorithm::globalDerivativesHierarchy: Invalid label " << globalLabel << " <= 0 or > 2147483647" << std::endl;
         }
       }
     }
     // Exclude mothers if Alignable selected to be no part of a hierarchy:
     if (thePedeSteer->isNoHiera(ali)) return true;
   }
   // Call recursively for mother, will stop if mother == 0:
   return this->globalDerivativesHierarchy(eventInfo,
                                           tsos, ali->mother(), alidet,
                                           globalDerivativesX, globalDerivativesY,
                                           globalLabels, lowestParams);
 }

void MillePedeAlignmentAlgorithm::initialize	(	const edm::EventSetup &	setup,
		AlignableTracker *	tracker,
		AlignableMuon *	muon,
		AlignableExtras *	extras,
		AlignmentParameterStore *	store
	)

virtual

Call at beginning of job.

Implements AlignmentAlgorithmBase.

Definition at line 126 of file MillePedeAlignmentAlgorithm.cc.

References addPxbSurvey(), edm::ParameterSet::addUntrackedParameter(), AlignmentParameterStore::alignables(), AlignmentParameterStore::applyParameters(), PedeSteerer::buildSubSteer(), buildUserVariables(), relativeConstraints::empty, edm::hlt::Exception, edm::ParameterSet::exists(), reco::get(), edm::EventSetup::get(), edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), isMode(), myMilleBit, myPedeSteerBit, edm::ESHandle< class >::product(), readFromPede(), AlignmentParameterStore::resetParameters(), cond::runnumber, findQualityFiles::size, AlCaHLTBitMon_QueryRunRegistry::string, theAlignableNavigator, theAlignables, theAlignmentParameterStore, theConfig, theDir, theDoSurveyPixelBarrel, theMonitor, thePedeLabels, thePedeSteer, theTrajectoryFactory, and cond::timeTypeSpecs.

 {
   if (muon) {
     edm::LogWarning("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::initialize"
                  << "Running with AlignabeMuon not yet tested.";
   }
 
   //Retrieve tracker topology from geometry
   edm::ESHandle<TrackerTopology> tTopoHandle;
   setup.get<IdealGeometryRecord>().get(tTopoHandle);
   const TrackerTopology* const tTopo = tTopoHandle.product();
 
   theAlignableNavigator = new AlignableNavigator(extras, tracker, muon);
   theAlignmentParameterStore = store;
   theAlignables = theAlignmentParameterStore->alignables();
 
   edm::ParameterSet pedeLabelerCfg(theConfig.getParameter<edm::ParameterSet>("pedeLabeler"));
   edm::VParameterSet RunRangeSelectionVPSet(theConfig.getUntrackedParameter<edm::VParameterSet>("RunRangeSelection"));
   pedeLabelerCfg.addUntrackedParameter<edm::VParameterSet>("RunRangeSelection",
                                RunRangeSelectionVPSet);
 
   std::string labelerPlugin = "PedeLabeler";
   if (RunRangeSelectionVPSet.size()>0) {
     labelerPlugin = "RunRangeDependentPedeLabeler";
     if (pedeLabelerCfg.exists("plugin")) {
       std::string labelerPluginCfg = pedeLabelerCfg.getParameter<std::string>("plugin");
       if ((labelerPluginCfg!="PedeLabeler" && labelerPluginCfg!="RunRangeDependentPedeLabeler") ||
       pedeLabelerCfg.getUntrackedParameter<edm::VParameterSet>("parameterInstances").size()>0) {
     throw cms::Exception("BadConfig")
       << "MillePedeAlignmentAlgorithm::initialize"
       << "both RunRangeSelection and generic labeler specified in config file. "
       << "Please get rid of either one of them.\n";
       }
     }
   } else {
     if (pedeLabelerCfg.exists("plugin")) {
       labelerPlugin = pedeLabelerCfg.getParameter<std::string>("plugin");
     }
   }
   
   if (!pedeLabelerCfg.exists("plugin")) {
     pedeLabelerCfg.addUntrackedParameter<std::string>("plugin", labelerPlugin);
   }
 
   edm::LogInfo("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::initialize"
                 << "Using plugin '" << labelerPlugin << "' to generate labels.";
   
   thePedeLabels = PedeLabelerPluginFactory::get()->create(labelerPlugin,
                               PedeLabelerBase::TopLevelAlignables(tracker, muon, extras),
                               pedeLabelerCfg);
   
   // 1) Create PedeSteerer: correct alignable positions for coordinate system selection
   edm::ParameterSet pedeSteerCfg(theConfig.getParameter<edm::ParameterSet>("pedeSteerer"));
   thePedeSteer = new PedeSteerer(tracker, muon, extras,
                  theAlignmentParameterStore, thePedeLabels,
                  pedeSteerCfg, theDir, !this->isMode(myPedeSteerBit));
   
   // 2) If requested, directly read in and apply result of previous pede run,
   //    assuming that correction from 1) was also applied to create the result:
   const std::vector<edm::ParameterSet> mprespset
     (theConfig.getParameter<std::vector<edm::ParameterSet> >("pedeReaderInputs"));
   if (!mprespset.empty()) {
     edm::LogInfo("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::initialize"
                   << "Apply " << mprespset.end() - mprespset.begin()
                   << " previous MillePede constants from 'pedeReaderInputs'.";
   }
 
   // FIXME: add selection of run range via 'pedeReaderInputs'
   // Note: Results for parameters of IntegratedCalibration's cannot be treated... 
   RunRange runrange(cond::timeTypeSpecs[cond::runnumber].beginValue,
             cond::timeTypeSpecs[cond::runnumber].endValue);
   for (std::vector<edm::ParameterSet>::const_iterator iSet = mprespset.begin(), iE = mprespset.end();
        iSet != iE; ++iSet) {
     // This read will ignore calibrations as long as they are not yet passed to Millepede
     // during/before initialize(..) - currently addCalibrations(..) is called later in AlignmentProducer
     if (!this->readFromPede((*iSet), false, runrange)) { // false: do not erase SelectionUserVariables
       throw cms::Exception("BadConfig")
     << "MillePedeAlignmentAlgorithm::initialize: Problems reading input constants of "
     << "pedeReaderInputs entry " << iSet - mprespset.begin() << '.';
     }
     theAlignmentParameterStore->applyParameters();
     // Needed to shut up later warning from checkAliParams:
     theAlignmentParameterStore->resetParameters();
   }
   
   // 3) Now create steerings with 'final' start position:
   thePedeSteer->buildSubSteer(tracker, muon, extras);
   
   // After (!) 1-3 of PedeSteerer which uses the SelectionUserVariables attached to the parameters:
   this->buildUserVariables(theAlignables); // for hit statistics and/or pede result
 
   if (this->isMode(myMilleBit)) {
     if (!theConfig.getParameter<std::vector<std::string> >("mergeBinaryFiles").empty() ||
         !theConfig.getParameter<std::vector<std::string> >("mergeTreeFiles").empty()) {
       throw cms::Exception("BadConfig")
         << "'vstring mergeTreeFiles' and 'vstring mergeBinaryFiles' must be empty for "
         << "modes running mille.";
     }
     const std::string moniFile(theConfig.getUntrackedParameter<std::string>("monitorFile"));
     if (moniFile.size()) theMonitor = new MillePedeMonitor(tTopo, (theDir + moniFile).c_str());
 
     // Get trajectory factory. In case nothing found, FrameWork will throw...
     const edm::ParameterSet fctCfg(theConfig.getParameter<edm::ParameterSet>("TrajectoryFactory"));
     const std::string fctName(fctCfg.getParameter<std::string>("TrajectoryFactoryName"));
     theTrajectoryFactory = TrajectoryFactoryPlugin::get()->create(fctName, fctCfg);
   }
 
   if (this->isMode(myPedeSteerBit)) {
     // Get config for survey and set flag accordingly
     const edm::ParameterSet pxbSurveyCfg(theConfig.getParameter<edm::ParameterSet>("surveyPixelBarrel"));
     theDoSurveyPixelBarrel = pxbSurveyCfg.getParameter<bool>("doSurvey");
     if (theDoSurveyPixelBarrel) this->addPxbSurvey(pxbSurveyCfg);
   }
 }

bool MillePedeAlignmentAlgorithm::is2D ( const TransientTrackingRecHit::ConstRecHitPointer & recHit ) const

private

true if hit belongs to 2D detector (currently tracker specific)

Definition at line 741 of file MillePedeAlignmentAlgorithm.cc.

 {
   // FIXME: Check whether this is a reliable and recommended way to find out...
 
   if (recHit->dimension() < 2) {
     return false; // some muon and TIB/TOB stuff really has RecHit1D
   } else if (recHit->detUnit()) { // detunit in strip is 1D, in pixel 2D 
     return recHit->detUnit()->type().isTrackerPixel();
   } else { // stereo strips  (FIXME: endcap trouble due to non-parallel strips (wedge sensors)?)
     if (dynamic_cast<const ProjectedSiStripRecHit2D*>(recHit->hit())) { // check persistent hit
       // projected: 1D measurement on 'glued' module
       return false;
     } else {
       return true;
     }
   }
 }

bool MillePedeAlignmentAlgorithm::isMode ( unsigned int testMode ) const

inlineprivate

Definition at line 211 of file MillePedeAlignmentAlgorithm.h.

References theMode.

Referenced by initialize(), MillePedeAlignmentAlgorithm(), run(), setParametersForRunRange(), and terminate().

211 {return (theMode & testMode);}

MillePedeAlignmentAlgorithm::theMode

unsigned int theMode

Definition: MillePedeAlignmentAlgorithm.h:218

void MillePedeAlignmentAlgorithm::makeGlobDerivMatrix	(	const std::vector< float > &	globalDerivativesx,
		const std::vector< float > &	globalDerivativesy,
		TMatrixF &	aGlobalDerivativesM
	)

private

Definition at line 978 of file MillePedeAlignmentAlgorithm.cc.

References i.

 {
 
   for (unsigned int i = 0; i < globalDerivativesx.size(); ++i) {
     aGlobalDerivativesM(0,i) = globalDerivativesx[i];
     aGlobalDerivativesM(1,i) = globalDerivativesy[i]; 
   }
 }

bool MillePedeAlignmentAlgorithm::readFromPede	(	const edm::ParameterSet &	mprespset,
		bool	setUserVars,
		const RunRange &	runrange
	)

private

read pede input defined by 'psetName', flag to create/not create MillePedeVariables

Definition at line 760 of file MillePedeAlignmentAlgorithm.cc.

References areEmptyParams(), dbtoconf::out, PedeReader::read(), matplotRender::reader, theAlignables, thePedeLabels, and thePedeSteer.

Referenced by initialize(), and setParametersForRunRange().

 {
   bool allEmpty = this->areEmptyParams(theAlignables);
 
   PedeReader reader(mprespset, *thePedeSteer, *thePedeLabels, runrange);
   std::vector<Alignable*> alis;
   bool okRead = reader.read(alis, setUserVars); // also may set params of IntegratedCalibration's
   bool numMatch = true;
   
   std::stringstream out;
   out << "Read " << alis.size() << " alignables";
   if (alis.size() != theAlignables.size()) {
     out << " while " << theAlignables.size() << " in store";
     numMatch = false; // FIXME: Should we check one by one? Or transfer 'alis' to the store?
   }
   if (!okRead) out << ", but problems in reading"; 
   if (!allEmpty) out << ", possibly overwriting previous settings";
   out << ".";
 
   if (okRead && allEmpty) {
     if (numMatch) { // as many alignables with result as trying to align
       edm::LogInfo("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::readFromPede" << out.str();
     } else if (alis.size()) { // dead module do not get hits and no pede result
       edm::LogWarning("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::readFromPede" << out.str();
     } else { // serious problem: no result read - and not all modules can be dead...
       edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::readFromPede" << out.str();
       return false;
     }
     return true;
   }
   // the rest is not OK:
   edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::readFromPede" << out.str();
   return false;
 }

void MillePedeAlignmentAlgorithm::run	(	const edm::EventSetup &	setup,
		const EventInfo &	eventInfo
	)

virtual

Run the algorithm on trajectories and tracks.

Implements AlignmentAlgorithmBase.

Definition at line 310 of file MillePedeAlignmentAlgorithm.cc.

References addReferenceTrajectory(), AlignmentAlgorithmBase::EventInfo::beamSpot(), MillePedeMonitor::fillRefTrajectory(), MillePedeMonitor::fillTrack(), MillePedeMonitor::fillUsedTrack(), isMode(), myMilleBit, theMonitor, theTrajectoryFactory, testEve_cfg::tracks, TrajectoryFactoryBase::trajectories(), HLT_25ns14e33_v1_cff::trajectories, and AlignmentAlgorithmBase::EventInfo::trajTrackPairs().

Referenced by Types.EventID::cppID(), and Types.LuminosityBlockID::cppID().

 {
   if (!this->isMode(myMilleBit)) return; // no theMille created...
   const ConstTrajTrackPairCollection &tracks = eventInfo.trajTrackPairs();
 
   if (theMonitor) { // monitor input tracks
     for (ConstTrajTrackPairCollection::const_iterator iTrajTrack = tracks.begin();
      iTrajTrack != tracks.end(); ++iTrajTrack) {
       theMonitor->fillTrack((*iTrajTrack).second);
     }
   }
 
   const RefTrajColl trajectories(theTrajectoryFactory->trajectories(setup, tracks, eventInfo.beamSpot()));
 
   // Now loop over ReferenceTrajectoryCollection
   unsigned int refTrajCount = 0; // counter for track monitoring if 1 track per trajectory
   for (RefTrajColl::const_iterator iRefTraj = trajectories.begin(), iRefTrajE = trajectories.end();
        iRefTraj != iRefTrajE; ++iRefTraj, ++refTrajCount) {
 
     RefTrajColl::value_type refTrajPtr = *iRefTraj; 
     if (theMonitor) theMonitor->fillRefTrajectory(refTrajPtr);
 
     const std::pair<unsigned int, unsigned int> nHitXy 
       = this->addReferenceTrajectory(setup, eventInfo, refTrajPtr);
 
     if (theMonitor && (nHitXy.first || nHitXy.second)) {
       // if track used (i.e. some hits), fill monitoring
       // track NULL ptr if trajectories and tracks do not match
       const reco::Track *trackPtr = 
     (trajectories.size() == tracks.size() ? tracks[refTrajCount].second : 0);
       theMonitor->fillUsedTrack(trackPtr, nHitXy.first, nHitXy.second);
     }
 
   } // end of reference trajectory and track loop
 }

bool MillePedeAlignmentAlgorithm::setParametersForRunRange ( const RunRange & runrange )

virtual

called in order to pass parameters to alignables for a specific run range in case the algorithm supports run range dependent alignment.

Reimplemented from AlignmentAlgorithmBase.

Definition at line 252 of file MillePedeAlignmentAlgorithm.cc.

References AlignmentParameterStore::applyParameters(), buildUserVariables(), doIO(), edm::ParameterSet::getParameter(), isMode(), myPedeReadBit, readFromPede(), AlignmentParameterStore::resetParameters(), AlignmentParameterStore::restoreCachedTransformations(), theAlignables, theAlignmentParameterStore, theConfig, and theLastWrittenIov.

 {
   if (this->isMode(myPedeReadBit)) {
     // restore initial positions, rotations and deformations
     theAlignmentParameterStore->restoreCachedTransformations();
 
     // Needed to shut up later warning from checkAliParams:
     theAlignmentParameterStore->resetParameters();
     // To avoid that they keep values from previous IOV if no new one in pede result
     this->buildUserVariables(theAlignables);
     
     if (!this->readFromPede(theConfig.getParameter<edm::ParameterSet>("pedeReader"), true, runrange)) {
       edm::LogError("Alignment") << "@SUB=MillePedeAlignmentAlgorithm::setParametersForRunRange"
                                  << "Problems reading pede result, but applying!";
     }
     theAlignmentParameterStore->applyParameters();
 
     this->doIO(++theLastWrittenIov); // pre-increment!
   }
   
   return true;
 }

void MillePedeAlignmentAlgorithm::terminate ( const edm::EventSetup & iSetup )

virtual

Call at end of job.

Implements AlignmentAlgorithmBase.

Definition at line 277 of file MillePedeAlignmentAlgorithm.cc.

References PedeSteerer::buildMasterSteer(), AlignmentParameterStore::cacheTransformations(), doIO(), MainPageGenerator::files, edm::ParameterSet::getParameter(), i, isMode(), myMilleBit, myPedeRunBit, PedeSteerer::runPede(), AlCaHLTBitMon_QueryRunRegistry::string, theAlignmentParameterStore, theConfig, theDir, theLastWrittenIov, theMille, and thePedeSteer.

 {
   delete theMille;// delete to close binary before running pede below (flush would be enough...)
   theMille = 0;
 
   std::vector<std::string> files;
   if (this->isMode(myMilleBit) || !theConfig.getParameter<std::string>("binaryFile").empty()) {
     files.push_back(theDir + theConfig.getParameter<std::string>("binaryFile"));
   } else {
     const std::vector<std::string> plainFiles
       (theConfig.getParameter<std::vector<std::string> >("mergeBinaryFiles"));
     for (std::vector<std::string>::const_iterator i = plainFiles.begin(), iEnd = plainFiles.end();
          i != iEnd; ++i) {
       files.push_back(theDir + *i);
     }
   }
   
   // cache all positions, rotations and deformations
   theAlignmentParameterStore->cacheTransformations();
 
   const std::string masterSteer(thePedeSteer->buildMasterSteer(files));// do only if myPedeSteerBit?
   if (this->isMode(myPedeRunBit)) {
     thePedeSteer->runPede(masterSteer);
   }
 
   // parameters from pede are not yet applied,
   // so we can still write start positions (but with hit statistics in case of mille): 
   this->doIO(0);
   theLastWrittenIov = 0;
 }