#include <ConversionProducer.h>

Inheritance diagram for ConversionProducer:

Public Member Functions
	ConversionProducer (const edm::ParameterSet &)

	~ConversionProducer ()

Public Member Functions inherited from edm::stream::EDProducer<>
	EDProducer ()=default

Public Member Functions inherited from edm::stream::EDProducerBase
	EDProducerBase ()

ModuleDescription const &	moduleDescription () const

virtual	~EDProducerBase ()

Public Member Functions inherited from edm::ProducerBase
	ProducerBase ()

void	registerProducts (ProducerBase , ProductRegistry , ModuleDescription const &)

std::function< void(BranchDescription const &)>	registrationCallback () const
	used by the fwk to register list of products More...

virtual	~ProducerBase ()

Public Member Functions inherited from edm::EDConsumerBase
std::vector< ConsumesInfo >	consumesInfo () const

	EDConsumerBase ()

ProductHolderIndexAndSkipBit	indexFrom (EDGetToken, BranchType, TypeID const &) const

void	itemsMayGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

void	itemsToGet (BranchType, std::vector< ProductHolderIndexAndSkipBit > &) const

std::vector < ProductHolderIndexAndSkipBit > const &	itemsToGetFromEvent () const

void	labelsForToken (EDGetToken iToken, Labels &oLabels) const

void	modulesDependentUpon (const std::string &iProcessName, std::vector< const char * > &oModuleLabels) const

void	modulesWhoseProductsAreConsumed (std::vector< ModuleDescription const * > &modules, ProductRegistry const &preg, std::map< std::string, ModuleDescription const * > const &labelsToDesc, std::string const &processName) const

bool	registeredToConsume (ProductHolderIndex, bool, BranchType) const

bool	registeredToConsumeMany (TypeID const &, BranchType) const

void	updateLookup (BranchType iBranchType, ProductHolderIndexHelper const &)

virtual	~EDConsumerBase ()

Private Types
typedef math::XYZPointF	Point

typedef std::vector< Point >	PointCollection

Private Member Functions
void	buildCollection (edm::Event &iEvent, const edm::EventSetup &iSetup, const std::multimap< float, edm::Ptr< reco::ConversionTrack > > &allTracks, const std::multimap< double, reco::CaloClusterPtr > &superClusterPtrs, const std::multimap< double, reco::CaloClusterPtr > &basicClusterPtrs, const reco::Vertex &the_pvtx, reco::ConversionCollection &outputConvPhotonCollection)

void	buildSuperAndBasicClusterGeoMap (const edm::Event &, std::multimap< double, reco::CaloClusterPtr > &basicClusterPtrs, std::multimap< double, reco::CaloClusterPtr > &superClusterPtrs)

bool	checkPhi (const edm::RefToBase< reco::Track > &tk_l, const edm::RefToBase< reco::Track > &tk_r, const TrackerGeometry trackerGeom, const MagneticField magField, const reco::Vertex &the_vertex)

bool	checkTrackPair (const std::pair< edm::RefToBase< reco::Track >, reco::CaloClusterPtr > &ll, const std::pair< edm::RefToBase< reco::Track >, reco::CaloClusterPtr > &rr)

bool	checkVertex (const reco::TransientTrack &ttk_l, const reco::TransientTrack &ttk_r, const MagneticField *magField, reco::Vertex &the_vertex)

double	etaTransformation (float EtaParticle, float Zvertex)

bool	getMatchedBC (const std::multimap< double, reco::CaloClusterPtr > &bcMap, const math::XYZPointF &trackImpactPosition, reco::CaloClusterPtr &closestBC)

bool	getTrackImpactPosition (const reco::Track tk_ref, const TrackerGeometry trackerGeom, const MagneticField *magField, math::XYZPointF &ew)

bool	matchingSC (const std::multimap< double, reco::CaloClusterPtr > &scMap, reco::Conversion &conv, reco::CaloClusterPtrVector &mSC)

bool	preselectTrackPair (const reco::TransientTrack &ttk_l, const reco::TransientTrack &ttk_r, double &appDist)

virtual void	produce (edm::Event &, const edm::EventSetup &)

math::XYZPointF	toFConverterP (const math::XYZPoint &val)

math::XYZVectorF	toFConverterV (const math::XYZVector &val)

bool	trackD0Cut (const edm::RefToBase< reco::Track > &ref)

bool	trackD0Cut (const edm::RefToBase< reco::Track > &ref, const reco::Vertex &the_pvtx)

bool	trackQualityFilter (const edm::RefToBase< reco::Track > &ref, bool isLeft)

Private Attributes
std::string	algoName_

bool	allowD0_

bool	allowDeltaCot_

bool	allowDeltaPhi_

bool	allowMinApproach_

bool	allowOppCharge_

bool	allowSingleLeg_

bool	allowTrackBC_

bool	allowVertex_

edm::EDGetTokenT< edm::View < reco::CaloCluster > >	bcBarrelCollection_

edm::EDGetTokenT< edm::View < reco::CaloCluster > >	bcEndcapCollection_

bool	bypassPreselEcal_

bool	bypassPreselEcalEcal_

bool	bypassPreselGsf_

std::string	ConvertedPhotonCollection_

double	d0Cut_

double	deltaCotTheta_

double	deltaEta_

double	deltaPhi_

double	dEtacutForSCmatching_

double	dEtaTkBC_

double	dPhicutForSCmatching_

double	dPhiTkBC_

double	dzCut_

double	energyBC_

double	energyTotalBC_

double	halfWayEta_

double	halfWayPhi_

double	maxChi2Left_

double	maxChi2Right_

unsigned int	maxNumOfTrackInPU_

double	maxTrackRho_

double	maxTrackZ_

double	minApproachHigh_

double	minApproachLow_

double	minHitsLeft_

double	minHitsRight_

double	minSCEt_

double	r_cut

bool	rightBC_

edm::EDGetTokenT< edm::View < reco::CaloCluster > >	scBarrelProducer_

edm::EDGetTokenT< edm::View < reco::CaloCluster > >	scEndcapProducer_

edm::EDGetTokenT< edm::View < reco::ConversionTrack > >	src_

const TransientTrackBuilder *	thettbuilder_

ConversionVertexFinder *	theVertexFinder_

bool	usePvtx_

edm::EDGetTokenT < reco::VertexCollection >	vertexProducer_

double	vtxChi2_

Additional Inherited Members
Public Types inherited from edm::stream::EDProducer<>
typedef CacheContexts< T...>	CacheTypes

typedef CacheTypes::GlobalCache	GlobalCache

typedef AbilityChecker< T...>	HasAbility

typedef CacheTypes::LuminosityBlockCache	LuminosityBlockCache

typedef LuminosityBlockContextT < LuminosityBlockCache, RunCache, GlobalCache >	LuminosityBlockContext

typedef CacheTypes::LuminosityBlockSummaryCache	LuminosityBlockSummaryCache

typedef CacheTypes::RunCache	RunCache

typedef RunContextT< RunCache, GlobalCache >	RunContext

typedef CacheTypes::RunSummaryCache	RunSummaryCache

Public Types inherited from edm::stream::EDProducerBase
typedef EDProducerAdaptorBase	ModuleType

Public Types inherited from edm::ProducerBase
typedef ProductRegistryHelper::TypeLabelList	TypeLabelList

Static Public Member Functions inherited from edm::stream::EDProducerBase
static const std::string &	baseType ()

static void	fillDescriptions (ConfigurationDescriptions &descriptions)

static void	prevalidate (ConfigurationDescriptions &descriptions)

Protected Member Functions inherited from edm::ProducerBase
void	callWhenNewProductsRegistered (std::function< void(BranchDescription const &)> const &func)

Protected Member Functions inherited from edm::EDConsumerBase
template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	consumes (edm::InputTag const &tag)

EDGetToken	consumes (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	consumes (TypeToGet const &id, edm::InputTag const &tag)

ConsumesCollector	consumesCollector ()
	Use a ConsumesCollector to gather consumes information from helper functions. More...

template<typename ProductType , BranchType B = InEvent>
void	consumesMany ()

void	consumesMany (const TypeToGet &id)

template<BranchType B>
void	consumesMany (const TypeToGet &id)

template<typename ProductType , BranchType B = InEvent>
EDGetTokenT< ProductType >	mayConsume (edm::InputTag const &tag)

EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

template<BranchType B>
EDGetToken	mayConsume (const TypeToGet &id, edm::InputTag const &tag)

Detailed Description

$Id:

Authors: H. Liu, UC of Riverside US, N. Marinelli Univ of Notre Dame

Description: Produces converted photon objects using default track collections

Implementation: <Notes on="" implementation>="">

Definition at line 66 of file ConversionProducer.h.

Member Typedef Documentation

typedef math::XYZPointF ConversionProducer::Point

private

Definition at line 86 of file ConversionProducer.h.

typedef std::vector<Point> ConversionProducer::PointCollection

private

Definition at line 87 of file ConversionProducer.h.

Constructor & Destructor Documentation

ConversionProducer::ConversionProducer ( const edm::ParameterSet & iConfig )

explicit

Definition at line 73 of file ConversionProducer.cc.

References algoName_, allowD0_, allowDeltaCot_, allowDeltaPhi_, allowMinApproach_, allowOppCharge_, allowSingleLeg_, allowTrackBC_, allowVertex_, bcBarrelCollection_, bcEndcapCollection_, bypassPreselEcal_, bypassPreselEcalEcal_, bypassPreselGsf_, ConvertedPhotonCollection_, d0Cut_, deltaCotTheta_, deltaEta_, deltaPhi_, dEtacutForSCmatching_, dEtaTkBC_, dPhicutForSCmatching_, dPhiTkBC_, dzCut_, energyBC_, energyTotalBC_, edm::ParameterSet::getParameter(), halfWayEta_, maxChi2Left_, maxChi2Right_, maxNumOfTrackInPU_, maxTrackRho_, maxTrackZ_, minApproachHigh_, minApproachLow_, minHitsLeft_, minHitsRight_, minSCEt_, r_cut, rightBC_, scBarrelProducer_, scEndcapProducer_, src_, AlCaHLTBitMon_QueryRunRegistry::string, thettbuilder_, theVertexFinder_, usePvtx_, vertexProducer_, and vtxChi2_.

                                                                     :
   theVertexFinder_(0)
 
 {
   algoName_ = iConfig.getParameter<std::string>( "AlgorithmName" );
 
   src_ = 
     consumes<edm::View<reco::ConversionTrack> >(iConfig.getParameter<edm::InputTag>("src"));
 
   maxNumOfTrackInPU_ = iConfig.getParameter<int>("maxNumOfTrackInPU");
   maxTrackRho_ = iConfig.getParameter<double>("maxTrackRho");
   maxTrackZ_ = iConfig.getParameter<double>("maxTrackZ");
 
   allowTrackBC_ = iConfig.getParameter<bool>("AllowTrackBC");
   allowD0_ = iConfig.getParameter<bool>("AllowD0");
   allowDeltaPhi_ = iConfig.getParameter<bool>("AllowDeltaPhi");
   allowDeltaCot_ = iConfig.getParameter<bool>("AllowDeltaCot");
   allowMinApproach_ = iConfig.getParameter<bool>("AllowMinApproach");
   allowOppCharge_ = iConfig.getParameter<bool>("AllowOppCharge");
 
   allowVertex_ = iConfig.getParameter<bool>("AllowVertex");
 
   bypassPreselGsf_ = iConfig.getParameter<bool>("bypassPreselGsf");
   bypassPreselEcal_ = iConfig.getParameter<bool>("bypassPreselEcal");
   bypassPreselEcalEcal_ = iConfig.getParameter<bool>("bypassPreselEcalEcal");
   
   deltaEta_ = iConfig.getParameter<double>("deltaEta");
   
   halfWayEta_ = iConfig.getParameter<double>("HalfwayEta");//open angle to search track matches with BC
 
   d0Cut_ = iConfig.getParameter<double>("d0");
     
   usePvtx_ = iConfig.getParameter<bool>("UsePvtx");//if use primary vertices
 
   vertexProducer_   = 
     consumes<reco::VertexCollection>(iConfig.getParameter<edm::InputTag>("primaryVertexProducer"));
   
 
   //Track-cluster matching eta and phi cuts
   dEtaTkBC_ = iConfig.getParameter<double>("dEtaTrackBC");//TODO research on cut endcap/barrel
   dPhiTkBC_ = iConfig.getParameter<double>("dPhiTrackBC");
   
   bcBarrelCollection_ = 
     consumes<edm::View<reco::CaloCluster> >(iConfig.getParameter<edm::InputTag>("bcBarrelCollection"));
   bcEndcapCollection_ = 
     consumes<edm::View<reco::CaloCluster> >(iConfig.getParameter<edm::InputTag>("bcEndcapCollection"));
   
   scBarrelProducer_   = 
     consumes<edm::View<reco::CaloCluster> >(iConfig.getParameter<edm::InputTag>("scBarrelProducer"));
   scEndcapProducer_   = 
     consumes<edm::View<reco::CaloCluster> >(iConfig.getParameter<edm::InputTag>("scEndcapProducer"));
   
   energyBC_               = iConfig.getParameter<double>("EnergyBC");//BC energy threshold
   energyTotalBC_          = iConfig.getParameter<double>("EnergyTotalBC");//BC energy threshold
   minSCEt_                = iConfig.getParameter<double>("minSCEt");//super cluster energy threshold
   dEtacutForSCmatching_     = iConfig.getParameter<double>("dEtacutForSCmatching");// dEta between conversion momentum direction and SC position
   dPhicutForSCmatching_     = iConfig.getParameter<double>("dPhicutForSCmatching");// dPhi between conversion momentum direction and SC position
 
   
    
 
   //Track cuts on left right track: at least one leg reaches ECAL
   //Left track: must exist, must reach Ecal and match BC, so loose cut on Chi2 and tight on hits
   //Right track: not necessary to exist (if allowSingleLeg_), not necessary to reach ECAL or match BC, so tight cut on Chi2 and loose on hits
   maxChi2Left_ =  iConfig.getParameter<double>("MaxChi2Left");
   maxChi2Right_ =  iConfig.getParameter<double>("MaxChi2Right");
   minHitsLeft_ = iConfig.getParameter<int>("MinHitsLeft");
   minHitsRight_ = iConfig.getParameter<int>("MinHitsRight");
 
   //Track Open angle cut on delta cot(theta) and delta phi
   deltaCotTheta_ = iConfig.getParameter<double>("DeltaCotTheta");
   deltaPhi_ = iConfig.getParameter<double>("DeltaPhi");
   minApproachLow_ = iConfig.getParameter<double>("MinApproachLow");
   minApproachHigh_ = iConfig.getParameter<double>("MinApproachHigh");
   
 
   // if allow single track collection, by default False
   allowSingleLeg_ = iConfig.getParameter<bool>("AllowSingleLeg");
   rightBC_ = iConfig.getParameter<bool>("AllowRightBC");
 
   //track inner position dz cut, need RECO
   dzCut_ = iConfig.getParameter<double>("dz");
   //track analytical cross cut
   r_cut = iConfig.getParameter<double>("rCut");
   vtxChi2_ = iConfig.getParameter<double>("vtxChi2");
 
 
   theVertexFinder_ = new ConversionVertexFinder ( iConfig );
 
   thettbuilder_ = 0;
 
   //output
   ConvertedPhotonCollection_     = iConfig.getParameter<std::string>("convertedPhotonCollection");
 
   produces< reco::ConversionCollection >(ConvertedPhotonCollection_);
 
 }

ConversionProducer::~ConversionProducer ( )

Definition at line 172 of file ConversionProducer.cc.

References theVertexFinder_.

 {
 
   // do anything here that needs to be done at desctruction time
   // (e.g. close files, deallocate resources etc.)
   delete theVertexFinder_;
 }

Member Function Documentation

void ConversionProducer::buildCollection	(	edm::Event &	iEvent,
		const edm::EventSetup &	iSetup,
		const std::multimap< float, edm::Ptr< reco::ConversionTrack > > &	allTracks,
		const std::multimap< double, reco::CaloClusterPtr > &	superClusterPtrs,
		const std::multimap< double, reco::CaloClusterPtr > &	basicClusterPtrs,
		const reco::Vertex &	the_pvtx,
		reco::ConversionCollection &	outputConvPhotonCollection
	)

private

match the track pair with a SC. If at least one track matches, store the SC

Definition at line 313 of file ConversionProducer.cc.

References ecalcalib_dqm_sourceclient-live_cfg::algo, reco::TrackBase::algo(), reco::Conversion::algoByName(), algoName_, allowOppCharge_, allowTrackBC_, muonTagProbeFilters_cff::allTracks, reco::Conversion::arbitratedEcalSeeded, reco::Conversion::arbitratedMerged, reco::Conversion::arbitratedMergedEcalGeneral, TransientTrackBuilder::build(), bypassPreselEcal_, bypassPreselEcalEcal_, bypassPreselGsf_, edm::RefToBase< T >::castTo(), reco::TrackBase::charge(), checkPhi(), checkVertex(), reco::Vertex::chi2(), ChiSquaredProbability(), deltaEta_, energyTotalBC_, reco::Track::extra(), reco::Conversion::generalTracksOnly, edm::EventSetup::get(), edm::RefToBase< T >::get(), getMatchedBC(), getTrackImpactPosition(), ZmumuStandaloneSelection_cff::goodVertex, reco::Conversion::highPurity, reco::Track::innerMomentum(), reco::Track::innerPosition(), edm::Ref< C, T, F >::isNonnull(), reco::Vertex::isValid(), matchingSC(), reco::Vertex::ndof(), ConversionHitChecker::nHitsBeforeVtx(), ConversionHitChecker::nSharedHits(), reco::Track::outerMomentum(), preselectTrackPair(), edm::ESHandle< class >::product(), findQualityFiles::rr, reco::Conversion::setMatchingSuperCluster(), reco::Conversion::setQuality(), thettbuilder_, toFConverterP(), toFConverterV(), trackD0Cut(), trackQualityFilter(), and vtxChi2_.

Referenced by produce().

                                                                                                {
   
   
   edm::ESHandle<TrackerGeometry> trackerGeomHandle;
   edm::ESHandle<MagneticField> magFieldHandle;
   iSetup.get<TrackerDigiGeometryRecord>().get( trackerGeomHandle );
   iSetup.get<IdealMagneticFieldRecord>().get( magFieldHandle );
   
   const TrackerGeometry* trackerGeom = trackerGeomHandle.product();
   const MagneticField* magField = magFieldHandle.product();
   
 //   std::vector<math::XYZPointF> trackImpactPosition;
 //   trackImpactPosition.reserve(allTracks.size());//track impact position at ECAL
 //   std::vector<bool> trackValidECAL;//Does this track reach ECAL basic cluster (reach ECAL && match with BC)
 //   trackValidECAL.assign(allTracks.size(), false);
 //   
 //   std::vector<reco::CaloClusterPtr> trackMatchedBC;
 //   reco::CaloClusterPtr empty_bc;
 //   trackMatchedBC.assign(allTracks.size(), empty_bc);//TODO find a better way to avoid copy constructor
 //   
 //   std::vector<int> bcHandleId;//the associated BC handle id, -1 invalid, 0 barrel 1 endcap
 //   bcHandleId.assign(allTracks.size(), -1);
   
   // not used    std::multimap<double, int> trackInnerEta;//Track innermost state Eta map to TrackRef index, to be used in track pair sorting
   
   std::map<edm::Ptr<reco::ConversionTrack>, math::XYZPointF> trackImpactPosition;
   std::map<edm::Ptr<reco::ConversionTrack>, reco::CaloClusterPtr> trackMatchedBC;
   
   ConversionHitChecker hitChecker;
   
   
   //2 propagate all tracks into ECAL, record its eta and phi
  
   for (std::multimap<float, edm::Ptr<reco::ConversionTrack> >::const_iterator tk_ref = allTracks.begin(); tk_ref != allTracks.end(); ++tk_ref ){
     const reco::Track* tk = tk_ref->second->trackRef().get()  ;
     
     
     //check impact position then match with BC
     math::XYZPointF ew;
     if ( getTrackImpactPosition(tk, trackerGeom, magField, ew) ){
       trackImpactPosition[tk_ref->second] = ew;
       
       reco::CaloClusterPtr closest_bc;//the closest matching BC to track
       
       if ( getMatchedBC(basicClusterPtrs, ew, closest_bc) ){
     trackMatchedBC[tk_ref->second] = closest_bc;
       }
     }    
   }
   
   
   
   //3. pair up tracks: 
   //TODO it is k-Closest pair of point problem
   //std::cout << " allTracks.size() " <<  allTracks.size() << std::endl;
   for(std::multimap<float, edm::Ptr<reco::ConversionTrack> >::const_iterator ll = allTracks.begin(); ll != allTracks.end();  ++ll ) {
     bool track1HighPurity=true;
     //std::cout << " Loop on allTracks " << std::endl;
     const  edm::RefToBase<reco::Track> & left = ll->second->trackRef();
     
 
     //TODO: This is a workaround, should be fixed with a proper function in the TTBuilder
     //(Note that the TrackRef and GsfTrackRef versions of the constructor are needed
     // to properly get refit tracks in the output vertex)
     reco::TransientTrack ttk_l;
     if (dynamic_cast<const reco::GsfTrack*>(left.get())) {
       ttk_l = thettbuilder_->build(left.castTo<reco::GsfTrackRef>());
     }
     else {
       ttk_l = thettbuilder_->build(left.castTo<reco::TrackRef>());
     }
     
     //      if ((allowTrackBC_ && !trackValidECAL[ll-allTracks.begin()]) )//this Left leg should have valid BC
     // continue;
     
     
     if (the_pvtx.isValid()){
       if (!(trackD0Cut(left, the_pvtx)))   track1HighPurity=false;
     } else {
       if (!(trackD0Cut(left)))  track1HighPurity=false;
     }
     
     std::vector<int> right_candidates;//store all right legs passed the cut (theta/approach and ref pair)
     std::vector<double> right_candidate_theta, right_candidate_approach;
     std::vector<std::pair<bool, reco::Vertex> > vertex_candidates;
     
     //inner loop only over tracks between eta and eta + deltaEta of the first track
     float etasearch = ll->first + deltaEta_;
     std::multimap<float, edm::Ptr<reco::ConversionTrack> >::const_iterator rr = ll;
     ++rr;    
     for (; rr != allTracks.lower_bound(etasearch); ++rr ) {
       bool track2HighPurity = true;
       bool highPurityPair = true;
       
       const  edm::RefToBase<reco::Track> & right = rr->second->trackRef();
       
       
       //TODO: This is a workaround, should be fixed with a proper function in the TTBuilder
       reco::TransientTrack ttk_r;
       if (dynamic_cast<const reco::GsfTrack*>(right.get())) {
         ttk_r = thettbuilder_->build(right.castTo<reco::GsfTrackRef>());
       }
       else {
         ttk_r = thettbuilder_->build(right.castTo<reco::TrackRef>());
       }
       //std::cout << " This track is " <<  right->algoName() << std::endl;
       
       
       //all vertexing preselection should go here
       
       //check for opposite charge
       if (  allowOppCharge_ && (left->charge()*right->charge() > 0) )  
         continue; //same sign, reject pair
           
       //if ( (allowTrackBC_ && !trackValidECAL[rr-allTracks.begin()] && rightBC_) )// if right track matches ECAL
       //  continue;
           
           
       double approachDist = -999.;
       //apply preselection to track pair, overriding preselection for gsf+X or ecalseeded+X pairs if so configured
       bool preselected = preselectTrackPair(ttk_l,ttk_r, approachDist);
       preselected = preselected || (bypassPreselGsf_ && (left->algo()==29 || right->algo()==29));
       preselected = preselected || (bypassPreselEcal_ && (left->algo()==15 || right->algo()==15 || left->algo()==16 || right->algo()==16));
       preselected = preselected || (bypassPreselEcalEcal_ && (left->algo()==15 || left->algo()==16) && (right->algo()==15 || right->algo()==16));
       
       if (!preselected) {
         continue;
       }
           
       //do the actual vertex fit
       reco::Vertex theConversionVertex;//by default it is invalid          
       bool goodVertex = checkVertex(ttk_l, ttk_r, magField, theConversionVertex);
           
       //bail as early as possible in case the fit didn't return a good vertex
       if (!goodVertex) {
         continue;
       }
 
           
           
       //track pair pass the quality cut
       if (   !( (trackQualityFilter(left, true) && trackQualityFilter(right, false))
                 || (trackQualityFilter(left, false) && trackQualityFilter(right, true)) ) ) {
         highPurityPair=false;
       }
 
       if (the_pvtx.isValid()){
         if (!(trackD0Cut(right, the_pvtx))) track2HighPurity=false; 
       } else {
         if (!(trackD0Cut(right))) track2HighPurity=false; 
       }
         
 
       //if all cuts passed, go ahead to make conversion candidates
       std::vector<edm::RefToBase<reco::Track> > trackPairRef;
       trackPairRef.push_back(left);//left track
       trackPairRef.push_back(right);//right track
 
       std::vector<math::XYZVectorF> trackPin;
       std::vector<math::XYZVectorF> trackPout;
       std::vector<math::XYZPointF> trackInnPos;
       std::vector<uint8_t> nHitsBeforeVtx;
       std::vector<Measurement1DFloat> dlClosestHitToVtx;
 
       if (left->extra().isNonnull() && right->extra().isNonnull()){//only available on TrackExtra
         trackInnPos.push_back(  toFConverterP(left->innerPosition()));
         trackInnPos.push_back(  toFConverterP(right->innerPosition()));
         trackPin.push_back(toFConverterV(left->innerMomentum()));
         trackPin.push_back(toFConverterV(right->innerMomentum()));
         trackPout.push_back(toFConverterV(left->outerMomentum()));
     trackPout.push_back(toFConverterV(right->outerMomentum()));
       }
           
       if (ll->second->trajRef().isNonnull() && rr->second->trajRef().isNonnull()) {
         std::pair<uint8_t,Measurement1DFloat> leftWrongHits = hitChecker.nHitsBeforeVtx(*ll->second->trajRef().get(),theConversionVertex);
         std::pair<uint8_t,Measurement1DFloat> rightWrongHits = hitChecker.nHitsBeforeVtx(*rr->second->trajRef().get(),theConversionVertex);
         nHitsBeforeVtx.push_back(leftWrongHits.first);
         nHitsBeforeVtx.push_back(rightWrongHits.first);
         dlClosestHitToVtx.push_back(leftWrongHits.second);
         dlClosestHitToVtx.push_back(rightWrongHits.second);            
       }
           
       uint8_t nSharedHits = hitChecker.nSharedHits(*left.get(),*right.get());
 
 
       //if using kinematic fit, check with chi2 post cut
       if (theConversionVertex.isValid()){
         const float chi2Prob = ChiSquaredProbability(theConversionVertex.chi2(), theConversionVertex.ndof());
         if (chi2Prob<vtxChi2_)  highPurityPair=false;
       }
 
       //std::cout << "  highPurityPair after vertex cut " <<  highPurityPair << std::endl;
       std::vector<math::XYZPointF> trkPositionAtEcal;
       std::vector<reco::CaloClusterPtr> matchingBC;
 
       if (allowTrackBC_){//TODO find out the BC ptrs if not doing matching, otherwise, leave it empty
         //const int lbc_handle = bcHandleId[ll-allTracks.begin()],
         //        rbc_handle = bcHandleId[rr-allTracks.begin()];
 
         std::map<edm::Ptr<reco::ConversionTrack>, math::XYZPointF>::const_iterator trackImpactPositionLeft = trackImpactPosition.find(ll->second);
         std::map<edm::Ptr<reco::ConversionTrack>, math::XYZPointF>::const_iterator trackImpactPositionRight = trackImpactPosition.find(rr->second);
         std::map<edm::Ptr<reco::ConversionTrack>, reco::CaloClusterPtr>::const_iterator trackMatchedBCLeft = trackMatchedBC.find(ll->second);        
         std::map<edm::Ptr<reco::ConversionTrack>, reco::CaloClusterPtr>::const_iterator trackMatchedBCRight = trackMatchedBC.find(rr->second);        
         
         if (trackImpactPositionLeft!=trackImpactPosition.end()) {
           trkPositionAtEcal.push_back(trackImpactPositionLeft->second);//left track
         }
         else {
           trkPositionAtEcal.push_back(math::XYZPointF());//left track
         }
         if (trackImpactPositionRight!=trackImpactPosition.end()) {//second track ECAL position may be invalid
           trkPositionAtEcal.push_back(trackImpactPositionRight->second);
         }
 
         double total_e_bc = 0.;
         if (trackMatchedBCLeft!=trackMatchedBC.end()) {
           matchingBC.push_back(trackMatchedBCLeft->second);//left track
           total_e_bc += trackMatchedBCLeft->second->energy();
         }
         else {
           matchingBC.push_back( reco::CaloClusterPtr() );//left track
         }
         if (trackMatchedBCRight!=trackMatchedBC.end()) {//second track ECAL position may be invalid
           matchingBC.push_back(trackMatchedBCRight->second);
           total_e_bc += trackMatchedBCRight->second->energy();
         }
         
         if (total_e_bc<energyTotalBC_) {
           highPurityPair = false;
         }
 
 
       }
       //signature cuts, then check if vertex, then post-selection cuts
       highPurityPair = highPurityPair && track1HighPurity && track2HighPurity && goodVertex && checkPhi(left, right, trackerGeom, magField, theConversionVertex) ;
 
 
       /*
         for ( std::vector<edm::RefToBase<reco::Track> >::iterator iTk=trackPairRef.begin();  iTk!=trackPairRef.end(); iTk++) {
         math::XYZPointF impPos;
         if ( getTrackImpactPosition(*iTk, trackerGeom, magField, impPos) ) {
            
         }
 
         }
       */
 
       const float minAppDist = approachDist;
       reco::Conversion::ConversionAlgorithm algo = reco::Conversion::algoByName(algoName_);
       float dummy=0;
       reco::CaloClusterPtrVector scPtrVec;
       reco::Conversion  newCandidate(scPtrVec,  trackPairRef, trkPositionAtEcal, theConversionVertex, matchingBC, minAppDist,  trackInnPos, trackPin, trackPout, nHitsBeforeVtx, dlClosestHitToVtx, nSharedHits, dummy, algo );
       // Fill in scPtrVec with the macthing SC
       if ( matchingSC ( superClusterPtrs, newCandidate, scPtrVec) ) 
         newCandidate.setMatchingSuperCluster( scPtrVec);
           
       //std::cout << " ConversionProducer  scPtrVec.size " <<  scPtrVec.size() << std::endl;
           
       newCandidate.setQuality(reco::Conversion::highPurity,  highPurityPair);
       bool generalTracksOnly = ll->second->isTrackerOnly() && rr->second->isTrackerOnly() && !dynamic_cast<const reco::GsfTrack*>(ll->second->trackRef().get()) && !dynamic_cast<const reco::GsfTrack*>(rr->second->trackRef().get());
       bool arbitratedEcalSeeded = ll->second->isArbitratedEcalSeeded() && rr->second->isArbitratedEcalSeeded();
       bool arbitratedMerged = ll->second->isArbitratedMerged() && rr->second->isArbitratedMerged();
       bool arbitratedMergedEcalGeneral = ll->second->isArbitratedMergedEcalGeneral() && rr->second->isArbitratedMergedEcalGeneral();          
           
       newCandidate.setQuality(reco::Conversion::generalTracksOnly,  generalTracksOnly);
       newCandidate.setQuality(reco::Conversion::arbitratedEcalSeeded,  arbitratedEcalSeeded);
       newCandidate.setQuality(reco::Conversion::arbitratedMerged,  arbitratedMerged);
       newCandidate.setQuality(reco::Conversion::arbitratedMergedEcalGeneral,  arbitratedMergedEcalGeneral);          
           
       outputConvPhotonCollection.push_back(newCandidate);
 
     }
       
   }
 
 
 
 
 
 
 }

void ConversionProducer::buildSuperAndBasicClusterGeoMap	(	const edm::Event &	iEvent,
		std::multimap< double, reco::CaloClusterPtr > &	basicClusterPtrs,
		std::multimap< double, reco::CaloClusterPtr > &	superClusterPtrs
	)

private

Definition at line 249 of file ConversionProducer.cc.

References bcBarrelCollection_, bcEndcapCollection_, energyBC_, edm::Event::getByToken(), cuy::ii, edm::HandleBase::isValid(), findQualityFiles::jj, minSCEt_, scBarrelProducer_, and scEndcapProducer_.

Referenced by produce().

                                                                                        {
 
   // Get the Super Cluster collection in the Barrel
   edm::Handle<edm::View<reco::CaloCluster> > scBarrelHandle;
   iEvent.getByToken(scBarrelProducer_,scBarrelHandle);
   if (!scBarrelHandle.isValid()) {
     edm::LogError("ConvertedPhotonProducer") 
       << "Error! Can't get the barrel superclusters!";
   }
     
   // Get the Super Cluster collection in the Endcap
   edm::Handle<edm::View<reco::CaloCluster> > scEndcapHandle;
   iEvent.getByToken(scEndcapProducer_,scEndcapHandle);
   if (!scEndcapHandle.isValid()) {
     edm::LogError("ConvertedPhotonProducer") 
       << "Error! Can't get the endcap superclusters!";
   }
     
     
   edm::Handle<edm::View<reco::CaloCluster> > bcBarrelHandle;
   edm::Handle<edm::View<reco::CaloCluster> > bcEndcapHandle;//TODO check cluster type if BasicCluster or PFCluster
 
   iEvent.getByToken( bcBarrelCollection_, bcBarrelHandle);
   if (!bcBarrelHandle.isValid()) {
     edm::LogError("ConvertedPhotonProducer") 
       << "Error! Can't get the barrel basic clusters!";
   }
 
   iEvent.getByToken( bcEndcapCollection_, bcEndcapHandle);
   if (! bcEndcapHandle.isValid()) {
     edm::LogError("ConvertedPhotonProducer") 
       << "Error! Can't get the endcap basic clusters!";
   }
 
   edm::Handle<edm::View<reco::CaloCluster> > bcHandle = bcBarrelHandle;
   edm::Handle<edm::View<reco::CaloCluster> > scHandle = scBarrelHandle;
 
   if ( bcHandle.isValid()  ) {    
     for (unsigned jj = 0; jj < 2; ++jj ){
       for (unsigned ii = 0; ii < bcHandle->size(); ++ii ) {
     if (bcHandle->ptrAt(ii)->energy()>energyBC_)
       basicClusterPtrs.insert(std::make_pair(bcHandle->ptrAt(ii)->position().eta(), bcHandle->ptrAt(ii)));
       }
       bcHandle = bcEndcapHandle;
     }
   }
 
 
   if ( scHandle.isValid()  ) {
     for (unsigned jj = 0; jj < 2; ++jj ){
       for (unsigned ii = 0; ii < scHandle->size(); ++ii ) {
     if (scHandle->ptrAt(ii)->energy()>minSCEt_)
       superClusterPtrs.insert(std::make_pair(scHandle->ptrAt(ii)->position().eta(), scHandle->ptrAt(ii)));
       }
       scHandle = scEndcapHandle;
     } 
   }
 
 
 }

bool ConversionProducer::checkPhi	(	const edm::RefToBase< reco::Track > &	tk_l,
		const edm::RefToBase< reco::Track > &	tk_r,
		const TrackerGeometry *	trackerGeom,
		const MagneticField *	magField,
		const reco::Vertex &	the_vertex
	)

private

Definition at line 746 of file ConversionProducer.cc.

References allowDeltaPhi_, anyDirection, reco::deltaPhi(), deltaPhi_, dPhi(), reco::Track::extra(), TrajectoryStateOnSurface::globalDirection(), reco::Track::innerMomentum(), trajectoryStateTransform::innerStateOnSurface(), edm::Ref< C, T, F >::isNonnull(), reco::Vertex::isValid(), TrajectoryStateOnSurface::isValid(), PV3DBase< T, PVType, FrameType >::phi(), reco::Vertex::position(), Propagator::propagate(), and makeMuonMisalignmentScenario::rot.

Referenced by buildCollection().

                                                         {
   if (!allowDeltaPhi_)
     return true;
   //if track has innermost momentum, check with innermost phi
   //if track also has valid vertex, propagate to vertex then calculate phi there
   //if track has no innermost momentum, just return true, because track->phi() makes no sense
   if (tk_l->extra().isNonnull() && tk_r->extra().isNonnull()){
     double iphi1 = tk_l->innerMomentum().phi(), iphi2 = tk_r->innerMomentum().phi();
     if (vtx.isValid()){
         PropagatorWithMaterial propag( anyDirection, 0.000511, magField );
         
         double recoPhoR = vtx.position().Rho();
         Surface::RotationType rot;
         ReferenceCountingPointer<BoundCylinder>  theBarrel_(new BoundCylinder(recoPhoR, Surface::PositionType(0,0,0), rot,
                                                                  new SimpleCylinderBounds( recoPhoR-0.001, recoPhoR+0.001, 
                                                                  -fabs(vtx.position().z()), fabs(vtx.position().z()))));
         ReferenceCountingPointer<BoundDisk>      theDisk_(
                                                         new BoundDisk( Surface::PositionType( 0, 0, vtx.position().z()), rot,
                                                                        new SimpleDiskBounds( 0, recoPhoR, -0.001, 0.001)));
 
         const TrajectoryStateOnSurface myTSOS1 = trajectoryStateTransform::innerStateOnSurface(*tk_l, *trackerGeom, magField);
         const TrajectoryStateOnSurface myTSOS2 = trajectoryStateTransform::innerStateOnSurface(*tk_r, *trackerGeom, magField);
         TrajectoryStateOnSurface  stateAtVtx1, stateAtVtx2;
         stateAtVtx1 = propag.propagate(myTSOS1, *theBarrel_);
         if (!stateAtVtx1.isValid() ) {
         stateAtVtx1 = propag.propagate(myTSOS1, *theDisk_);
         }
         if (stateAtVtx1.isValid()){
         iphi1 = stateAtVtx1.globalDirection().phi();
         }
         stateAtVtx2 = propag.propagate(myTSOS2, *theBarrel_);
         if (!stateAtVtx2.isValid() ) {
         stateAtVtx2 = propag.propagate(myTSOS2, *theDisk_);
         }
         if (stateAtVtx2.isValid()){
         iphi2 = stateAtVtx2.globalDirection().phi();
         }
     }
     const double dPhi = reco::deltaPhi(iphi1, iphi2);
     return (fabs(dPhi) < deltaPhi_);
   } else {
     return true;
   }
 }

bool ConversionProducer::checkTrackPair	(	const std::pair< edm::RefToBase< reco::Track >, reco::CaloClusterPtr > &	ll,
		const std::pair< edm::RefToBase< reco::Track >, reco::CaloClusterPtr > &	rr
	)

private

Definition at line 853 of file ConversionProducer.cc.

References allowTrackBC_, energyTotalBC_, edm::Ptr< T >::isNonnull(), rightBC_, and findQualityFiles::rr.

                                                                                                        {
 
   const reco::CaloClusterPtr& bc_l = ll.second;//can be null, so check isNonnull()
   const reco::CaloClusterPtr& bc_r = rr.second;
     
   //The cuts should be ordered by considering if takes time and if cuts off many fakes
   if (allowTrackBC_){
     //check energy of BC
     double total_e_bc = 0;
     if (bc_l.isNonnull()) total_e_bc += bc_l->energy();
     if (rightBC_) 
         if (bc_r.isNonnull())
         total_e_bc += bc_r->energy();
 
     if (total_e_bc < energyTotalBC_) return false;
   }
 
   return true;
 }

bool ConversionProducer::checkVertex	(	const reco::TransientTrack &	ttk_l,
		const reco::TransientTrack &	ttk_r,
		const MagneticField *	magField,
		reco::Vertex &	the_vertex
	)

private

Definition at line 877 of file ConversionProducer.cc.

References newFWLiteAna::found, ConversionVertexFinder::run(), and theVertexFinder_.

Referenced by buildCollection().

                                                             {
   bool found = false;
 
   std::vector<reco::TransientTrack>  pair;
   pair.push_back(ttk_l);
   pair.push_back(ttk_r);
    
   found = theVertexFinder_->run(pair, the_vertex);
 
 
 
   return found;
 }

double ConversionProducer::etaTransformation	(	float	EtaParticle,
		float	Zvertex
	)

private

Definition at line 895 of file ConversionProducer.cc.

References ETA, etaBarrelEndcap, cmsBatch::log, PI, R_ECAL, funct::tan(), and Z_Endcap.

Referenced by matchingSC().

                                                                                  {
 
   //---Definitions
   const float PI    = 3.1415927;
 
   //---Definitions for ECAL
   const float R_ECAL           = 136.5;
   const float Z_Endcap         = 328.0;
   const float etaBarrelEndcap  = 1.479; 
    
   //---ETA correction
 
   float Theta = 0.0  ; 
   float ZEcal = R_ECAL*sinh(EtaParticle)+Zvertex;
 
   if(ZEcal != 0.0) Theta = atan(R_ECAL/ZEcal);
   if(Theta<0.0) Theta = Theta+PI ;
   double ETA = - log(tan(0.5*Theta));
          
   if( fabs(ETA) > etaBarrelEndcap )
     {
       float Zend = Z_Endcap ;
       if(EtaParticle<0.0 )  Zend = -Zend ;
       float Zlen = Zend - Zvertex ;
       float RR = Zlen/sinh(EtaParticle); 
       Theta = atan(RR/Zend);
       if(Theta<0.0) Theta = Theta+PI ;
       ETA = - log(tan(0.5*Theta));            
     } 
   //---Return the result
   return ETA;
   //---end
 }

bool ConversionProducer::getMatchedBC	(	const std::multimap< double, reco::CaloClusterPtr > &	bcMap,
		const math::XYZPointF &	trackImpactPosition,
		reco::CaloClusterPtr &	closestBC
	)

private

Definition at line 710 of file ConversionProducer.cc.

References kinem::delta_eta(), kinem::delta_phi(), reco::deltaPhi(), dEtaTkBC_, dPhiTkBC_, halfWayEta_, and HLT_25ns14e33_v1_cff::min_eta.

Referenced by buildCollection().

                                                                     {
   const double track_eta = trackImpactPosition.eta();
   const double track_phi = trackImpactPosition.phi();
 
   double min_eta = 999., min_phi = 999.;
   reco::CaloClusterPtr closest_bc;
   for (std::multimap<double, reco::CaloClusterPtr>::const_iterator bc = bcMap.lower_bound(track_eta - halfWayEta_);
        bc != bcMap.upper_bound(track_eta + halfWayEta_); ++bc){//use eta map to select possible BC collection then loop in
     const reco::CaloClusterPtr& ebc = bc->second;
     const double delta_eta = track_eta-(ebc->position().eta());
     const double delta_phi = reco::deltaPhi(track_phi, (ebc->position().phi()));
     if (fabs(delta_eta)<dEtaTkBC_ && fabs(delta_phi)<dPhiTkBC_){
         if (fabs(min_eta)>fabs(delta_eta) && fabs(min_phi)>fabs(delta_phi)){//take the closest to track BC
         min_eta = delta_eta;
         min_phi = delta_phi;
         closest_bc = bc->second;
         //TODO check if min_eta>delta_eta but min_phi<delta_phi
         }
     }
   }
 
   if (min_eta < 999.){
     closestBC = closest_bc;
     return true;
   } else
     return false;
 }

bool ConversionProducer::getTrackImpactPosition	(	const reco::Track *	tk_ref,
		const TrackerGeometry *	trackerGeom,
		const MagneticField *	magField,
		math::XYZPointF &	ew
	)

private

Definition at line 633 of file ConversionProducer.cc.

References alongMomentum, barrelHalfLength(), barrelRadius(), endcapRadius(), endcapZ(), geometryDiff::epsilon, PV3DBase< T, PVType, FrameType >::eta(), f, TrajectoryStateOnSurface::globalPosition(), TrajectoryStateOnSurface::isValid(), trajectoryStateTransform::outerStateOnSurface(), Propagator::propagate(), makeMuonMisalignmentScenario::rot, and PV3DBase< T, PVType, FrameType >::z().

Referenced by buildCollection().

                                                                   {
 
   PropagatorWithMaterial propag( alongMomentum, 0.000511, magField );
   
   ReferenceCountingPointer<Surface> ecalWall(
                                              new  BoundCylinder(129.f, GlobalPoint(0.,0.,0.), TkRotation<float>(),
                                                                  new SimpleCylinderBounds( 129, 129, -320.5, 320.5 ) ) );
   const float epsilon = 0.001;
   Surface::RotationType rot; // unit rotation matrix
   const float barrelRadius = 129.f;
   const float barrelHalfLength = 270.9f;
   const float endcapRadius = 171.1f;
   const float endcapZ = 320.5f;
   ReferenceCountingPointer<BoundCylinder>  theBarrel_(new BoundCylinder(barrelRadius, Surface::PositionType(0,0,0), rot,
                                                                          new SimpleCylinderBounds( barrelRadius-epsilon, barrelRadius+epsilon, 
 -barrelHalfLength, barrelHalfLength)));
   ReferenceCountingPointer<BoundDisk>      theNegativeEtaEndcap_(
                                                                  new BoundDisk( Surface::PositionType( 0, 0, -endcapZ), rot,
                                                                                 new SimpleDiskBounds( 0, endcapRadius, -epsilon, epsilon)));
   ReferenceCountingPointer<BoundDisk>      thePositiveEtaEndcap_(
                                                                  new BoundDisk( Surface::PositionType( 0, 0, endcapZ), rot,
                                                                                 new SimpleDiskBounds( 0, endcapRadius, -epsilon, epsilon)));
 
   //const TrajectoryStateOnSurface myTSOS = trajectoryStateTransform::innerStateOnSurface(*(*ref), *trackerGeom, magField);
   const TrajectoryStateOnSurface myTSOS = trajectoryStateTransform::outerStateOnSurface(*tk_ref, *trackerGeom, magField);
   TrajectoryStateOnSurface  stateAtECAL;
   stateAtECAL = propag.propagate(myTSOS, *theBarrel_);
   if (!stateAtECAL.isValid() || ( stateAtECAL.isValid() && fabs(stateAtECAL.globalPosition().eta() ) >1.479f )  ) {
     //endcap propagator
     if (myTSOS.globalPosition().z() > 0.) {
         stateAtECAL = propag.propagate(myTSOS, *thePositiveEtaEndcap_);
     } else {
         stateAtECAL = propag.propagate(myTSOS, *theNegativeEtaEndcap_);
     }
   }       
   if (stateAtECAL.isValid()){
     ew = stateAtECAL.globalPosition();
     return true;
   }
   else
     return false;
 }

bool ConversionProducer::matchingSC	(	const std::multimap< double, reco::CaloClusterPtr > &	scMap,
		reco::Conversion &	conv,
		reco::CaloClusterPtrVector &	mSC
	)

private

Definition at line 681 of file ConversionProducer.cc.

References kinem::delta_eta(), kinem::delta_phi(), reco::deltaPhi(), dEtacutForSCmatching_, dPhicutForSCmatching_, etaTransformation(), match(), edm::PtrVector< T >::push_back(), reco::Conversion::refittedPairMomentum(), and reco::Conversion::zOfPrimaryVertexFromTracks().

Referenced by buildCollection().

                                                                    {
 
   //  double dRMin=999.;
   double detaMin=999.;
   double dphiMin=999.;                 
   reco::CaloClusterPtr match;
   for (std::multimap<double, reco::CaloClusterPtr>::const_iterator scItr = scMap.begin();  scItr != scMap.end(); scItr++) {
     const reco::CaloClusterPtr& sc = scItr->second; 
     const double delta_phi = reco::deltaPhi( aConv.refittedPairMomentum().phi(), sc->phi());
     double sceta = sc->eta();
     double conveta = etaTransformation(aConv.refittedPairMomentum().eta(), aConv.zOfPrimaryVertexFromTracks() );
     const double delta_eta = fabs(conveta - sceta);
     if ( fabs(delta_eta) < fabs(detaMin) && fabs(delta_phi) < fabs(dphiMin) ) {
       detaMin=  fabs(delta_eta);
       dphiMin=  fabs(delta_phi);
       match=sc;
     }
   }
   
   if ( fabs(detaMin) < dEtacutForSCmatching_ && fabs(dphiMin) < dPhicutForSCmatching_ ) {
     mSC.push_back(match);
     return true;
   } else 
     return false;
 }

bool ConversionProducer::preselectTrackPair	(	const reco::TransientTrack &	ttk_l,
		const reco::TransientTrack &	ttk_r,
		double &	appDist
	)

private

Definition at line 793 of file ConversionProducer.cc.

References funct::abs(), allowDeltaCot_, allowMinApproach_, TangentApproachInRPhi::calculate(), ClosestApproachInRPhi::calculate(), TangentApproachInRPhi::crossingPoint(), ClosestApproachInRPhi::crossingPoint(), deltaCotTheta_, dzCut_, reco::Track::innerMomentum(), reco::TransientTrack::innermostMeasurementState(), maxTrackRho_, maxTrackZ_, minApproachHigh_, PV3DBase< T, PVType, FrameType >::perp(), TangentApproachInRPhi::perpdist(), r_cut, rho, TangentApproachInRPhi::status(), ClosestApproachInRPhi::status(), funct::tan(), reco::TransientTrack::track(), TangentApproachInRPhi::trajectoryParameters(), and PV3DBase< T, PVType, FrameType >::z().

Referenced by buildCollection().

                                                              {
   
 
   double dCotTheta =  1./tan(ttk_l.track().innerMomentum().theta()) - 1./tan(ttk_r.track().innerMomentum().theta());
   if (allowDeltaCot_ && (std::abs(dCotTheta) > deltaCotTheta_)) {
     return false;
   }
   
   //non-conversion hypothesis, reject prompt track pairs
   ClosestApproachInRPhi closest;
   closest.calculate(ttk_l.innermostMeasurementState(),ttk_r.innermostMeasurementState());
   if (!closest.status()) {
     return false;
   }
   
   if (closest.crossingPoint().perp() < r_cut) {
     return false;
   }
 
   
   //compute tangent point btw tracks (conversion hypothesis)
   TangentApproachInRPhi tangent;
   tangent.calculate(ttk_l.innermostMeasurementState(),ttk_r.innermostMeasurementState());
   if (!tangent.status()) {
     return false;
   }
   
   GlobalPoint tangentPoint = tangent.crossingPoint();
   double rho = tangentPoint.perp();
   
   //reject candidates well outside of tracker bounds
   if (rho > maxTrackRho_) {
     return false;
   }
   
   if (std::abs(tangentPoint.z()) > maxTrackZ_) {
     return false;
   }
   
   std::pair<GlobalTrajectoryParameters,GlobalTrajectoryParameters> trajs = tangent.trajectoryParameters();
   
   //very large separation in z, no hope
   if (std::abs(trajs.first.position().z() - trajs.second.position().z()) > dzCut_) {
     return false;
   }
   
   
   float minApproach = tangent.perpdist();
   appDist = minApproach;
   
   if (allowMinApproach_ && (minApproach < minApproachLow_ || minApproach > minApproachHigh_) ) {
     return false;
   }
   
   return true;
   
   
 }

void ConversionProducer::produce	(	edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)

privatevirtual

Implements edm::stream::EDProducerBase.

Definition at line 183 of file ConversionProducer.cc.

References buildCollection(), buildSuperAndBasicClusterGeoMap(), ConvertedPhotonCollection_, edm::EventSetup::get(), edm::Event::getByToken(), i, maxNumOfTrackInPU_, edm::PtrVector< T >::push_back(), edm::Event::put(), src_, thettbuilder_, usePvtx_, GoodVertex_cfg::vertexCollection, and vertexProducer_.

 {
   using namespace edm;
 
   reco::ConversionCollection outputConvPhotonCollection;
   std::auto_ptr<reco::ConversionCollection> outputConvPhotonCollection_p(new reco::ConversionCollection);
 
   //std::cout << " ConversionProducer::produce " << std::endl;
   //Read multiple track input collections
 
   edm::Handle<edm::View<reco::ConversionTrack> > trackCollectionHandle;
   iEvent.getByToken(src_,trackCollectionHandle);    
 
   //build map of ConversionTracks ordered in eta
   std::multimap<float, edm::Ptr<reco::ConversionTrack> > convTrackMap;
   edm::PtrVector<reco::ConversionTrack> trackPtrVector;
   for (size_t i = 0; i < trackCollectionHandle->size(); ++i)
     trackPtrVector.push_back(trackCollectionHandle->ptrAt(i));
 
   for (edm::PtrVector<reco::ConversionTrack>::const_iterator tk_ref = trackPtrVector.begin(); tk_ref != trackPtrVector.end(); ++tk_ref ){
     convTrackMap.insert(std::make_pair((*tk_ref)->track()->eta(),*tk_ref));
   }
 
   edm::Handle<reco::VertexCollection> vertexHandle;
   reco::VertexCollection vertexCollection;
   if (usePvtx_){
     iEvent.getByToken(vertexProducer_, vertexHandle);
     if (!vertexHandle.isValid()) {
       edm::LogError("ConversionProducer") 
     << "Error! Can't get the product primary Vertex Collection "<< "\n";
       usePvtx_ = false;
     }
     if (usePvtx_)
       vertexCollection = *(vertexHandle.product());
   }
     
   edm::ESHandle<TransientTrackBuilder> hTransientTrackBuilder;
   iSetup.get<TransientTrackRecord>().get("TransientTrackBuilder",hTransientTrackBuilder);
   thettbuilder_ = hTransientTrackBuilder.product();
     
   reco::Vertex the_pvtx;
   //because the priamry vertex is sorted by quality, the first one is the best
   if (!vertexCollection.empty())
     the_pvtx = *(vertexCollection.begin());
     
   if (trackCollectionHandle->size()> maxNumOfTrackInPU_){
     iEvent.put( outputConvPhotonCollection_p, ConvertedPhotonCollection_);
     return;
   }
     
     
   // build Super and Basic cluster geometry map to search in eta bounds for clusters
   std::multimap<double, reco::CaloClusterPtr> basicClusterPtrs;
   std::multimap<double, reco::CaloClusterPtr> superClusterPtrs;
 
   
   buildSuperAndBasicClusterGeoMap(iEvent,basicClusterPtrs,superClusterPtrs);
       
   buildCollection( iEvent, iSetup, convTrackMap,  superClusterPtrs, basicClusterPtrs, the_pvtx, outputConvPhotonCollection);//allow empty basicClusterPtrs
     
   outputConvPhotonCollection_p->assign(outputConvPhotonCollection.begin(), outputConvPhotonCollection.end());
   iEvent.put( outputConvPhotonCollection_p, ConvertedPhotonCollection_);
     
 }

math::XYZPointF ConversionProducer::toFConverterP ( const math::XYZPoint & val )

inlineprivate

Definition at line 187 of file ConversionProducer.h.

Referenced by buildCollection().

                                                             {
     return math::XYZPointF(val.x(),val.y(),val.z());
       }

math::XYZVectorF ConversionProducer::toFConverterV ( const math::XYZVector & val )

inlineprivate

Definition at line 191 of file ConversionProducer.h.

Referenced by buildCollection().

                                                               {
     return math::XYZVectorF(val.x(),val.y(),val.z());
       }

bool ConversionProducer::trackD0Cut ( const edm::RefToBase< reco::Track > & ref )

inlineprivate

Definition at line 622 of file ConversionProducer.cc.

References allowD0_, reco::TrackBase::charge(), reco::TrackBase::d0(), d0Cut_, and reco::TrackBase::d0Error().

Referenced by buildCollection().

                                                                               {
   //NOTE if not allow d0 cut, always true
   return ((!allowD0_) || !(ref->d0()*ref->charge()/ref->d0Error()<d0Cut_));
 }

bool ConversionProducer::trackD0Cut	(	const edm::RefToBase< reco::Track > &	ref,
		const reco::Vertex &	the_pvtx
	)

inlineprivate

Definition at line 627 of file ConversionProducer.cc.

References allowD0_, reco::TrackBase::charge(), d0Cut_, reco::TrackBase::dxy(), reco::TrackBase::dxyError(), and reco::Vertex::position().

                                                                                                          {
   //
   return ((!allowD0_) || !(-ref->dxy(the_pvtx.position())*ref->charge()/ref->dxyError()<d0Cut_));
 }

bool ConversionProducer::trackQualityFilter	(	const edm::RefToBase< reco::Track > &	ref,
		bool	isLeft
	)

inlineprivate

Definition at line 611 of file ConversionProducer.cc.

References reco::Track::found(), maxChi2Left_, maxChi2Right_, minHitsLeft_, minHitsRight_, and reco::TrackBase::normalizedChi2().

Referenced by buildCollection().

                                                                                                     {
   bool pass = true;
   if (isLeft){
     pass = (ref->normalizedChi2() < maxChi2Left_ && ref->found() >= minHitsLeft_);
   } else {
     pass = (ref->normalizedChi2() < maxChi2Right_ && ref->found() >= minHitsRight_);
   }
 
   return pass;
 }