1 #ifndef SINGLETOPTCHANNELLEPTONDQM
2 #define SINGLETOPTCHANNELLEPTONDQM
52 namespace SingleTopTChannelLepton {
79 return label.substr(label.find(
':') + 1);
84 return label.substr(0, label.find(
':'));
89 const std::vector<std::string>
labels);
100 if (
booked(histName.c_str()))
105 if (
booked(histName.c_str()))
106 hists_.find(histName.c_str())->
second->Fill(xValue, yValue);
110 double zValue)
const {
111 if (
booked(histName.c_str()))
112 hists_.find(histName.c_str())->
second->Fill(xValue, yValue, zValue);
121 std::vector<edm::EDGetTokenT<edm::View<reco::MET> > >
mets_;
165 std::unique_ptr<StringCutObjectSelector<reco::Vertex> >
pvSelect_;
201 std::map<std::string, MonitorElement*>
hists_;
207 for (
unsigned int idx = 0;
idx < labels.size(); ++
idx) {
208 hists_[(channel +
"Mon_").c_str()]
210 hists_[(channel +
"Eff_").c_str()]
211 ->setBinLabel(idx + 1,
"[" +
selectionPath(labels[idx]) +
"]|[" +
220 const std::vector<std::string>
labels)
const {
221 for (
unsigned int idx = 0;
idx < labels.size(); ++
idx) {
223 fill((channel +
"Mon_").c_str(), idx + 0.5);
225 int evts =
hists_.find((channel +
"Mon_").c_str())
226 ->second->getBinContent(idx + 1);
227 double value =
hists_.find((channel +
"Eff_").c_str())
228 ->second->getBinContent(idx + 1);
230 (channel +
"Eff_").c_str(), idx + 0.5,
299 return label.substr(0, label.find(
':'));
304 return label.substr(label.find(
':') + 1);
336 std::unique_ptr<SingleTopTChannelLepton::MonitorEnsemble> > >
339 std::unique_ptr<SelectionStep<reco::Muon> >
MuonStep;
340 std::unique_ptr<SelectionStep<reco::PFCandidate> >
PFMuonStep;
343 std::unique_ptr<SelectionStep<reco::Vertex> >
PvStep;
345 std::vector<std::unique_ptr<SelectionStep<reco::Jet> > >
JetSteps;
346 std::vector<std::unique_ptr<SelectionStep<reco::CaloJet> > >
CaloJetSteps;
347 std::vector<std::unique_ptr<SelectionStep<reco::PFJet> > >
PFJetSteps;
349 std::unique_ptr<SelectionStep<reco::MET> >
METStep;
std::vector< std::string > selectionOrder_
std::map< std::string, MonitorElement * > hists_
histogram container
std::string objectType(const std::string &label)
~SingleTopTChannelLeptonDQM()
default destructor
edm::EDGetTokenT< reco::JetIDValueMap > jetIDLabel_
jetID as an extra selection type
double btagEffWP_
btag working points
std::vector< std::string > triggerPaths_
trigger paths
Level verbosity_
verbosity level for booking
std::unique_ptr< SelectionStep< reco::Vertex > > PvStep
std::vector< ParameterSet > VParameterSet
int logged_
number of logged interesting events
std::vector< std::unique_ptr< SelectionStep< reco::CaloJet > > > CaloJetSteps
std::vector< std::unique_ptr< SelectionStep< reco::Jet > > > JetSteps
define MonitorEnsembple to be used
bool booked(const std::string histName) const
check if histogram was booked
edm::EDGetTokenT< reco::JetTagCollection > btagCombVtx_
edm::EDGetTokenT< edm::TriggerResults > triggerTable__
trigger table
edm::InputTag beamspot_
beamspot
std::string muonIso_
extra isolation criterion on muon
std::vector< std::string > triggerPaths_
bool accept(const edm::Event &event, const edm::TriggerResults &triggerTable, const std::string &triggerPath)
std::string muonSelect_
extra selection on muons
edm::EDGetTokenT< edm::View< reco::PFCandidate > > muons_
SingleTopTChannelLeptonDQM(const edm::ParameterSet &cfg)
default constructor
U second(std::pair< T, U > const &p)
edm::InputTag vertex_
primary vertex
std::string elecSelect_
extra selection on electrons
double lowerEdge_
mass window upper and lower edge
void triggerBinLabels(std::string channel, const std::vector< std::string > labels)
set configurable labels for trigger monitoring histograms
std::string monitorPath(const std::string &label) const
edm::EDGetTokenT< edm::View< reco::GsfElectron > > elecs_gsf_
std::unique_ptr< StringCutObjectSelector< reco::Vertex > > pvSelect_
void fill(const std::string histName, double xValue, double yValue, double zValue) const
fill histogram if it had been booked before (2-dim version)
edm::EDGetTokenT< reco::JetTagCollection > btagPur_
How EventSelector::AcceptEvent() decides whether to accept an event for output otherwise it is excluding the probing of A single or multiple positive and the trigger will pass if any such matching triggers are PASS or EXCEPTION[A criterion thatmatches no triggers at all is detected and causes a throw.] A single negative with an expectation of appropriate bit checking in the decision and the trigger will pass if any such matching triggers are FAIL or EXCEPTION A wildcarded negative criterion that matches more than one trigger in the trigger but the state exists so we define the behavior If all triggers are the negative crieriion will lead to accepting the event(this again matches the behavior of"!*"before the partial wildcard feature was incorporated).The per-event"cost"of each negative criterion with multiple relevant triggers is about the same as!*was in the past
edm::EDGetTokenT< reco::JetTagCollection > btagEff_
btag discriminator labels
edm::EDConsumerBase tmpConsumerBase
std::unique_ptr< StringCutObjectSelector< reco::JetID > > jetIDSelect_
extra jetID selection on calo jets
std::unique_ptr< SelectionStep< reco::PFCandidate > > PFElectronStep
std::string selectionPath(const std::string &label) const
edm::EDGetTokenT< edm::TriggerResults > triggerTable_
trigger table
edm::EDGetTokenT< edm::ValueMap< float > > electronId_
electronId label
std::string selectionStep(const std::string &label)
std::unique_ptr< SelectionStep< reco::GsfElectron > > ElectronStep
edm::EDGetTokenT< reco::JetTagCollection > btagVtx_
tuple idx
DEBUGGING if hasattr(process,"trackMonIterativeTracking2012"): print "trackMonIterativeTracking2012 D...
edm::EDGetTokenT< edm::View< reco::Vertex > > pvs_
edm::EDGetTokenT< edm::View< reco::PFCandidate > > elecs_
std::unique_ptr< SelectionStep< reco::MET > > METStep
std::vector< edm::EDGetTokenT< edm::View< reco::MET > > > mets_
considers a vector of METs
void fill(const edm::Event &event, const edm::EventSetup &setup)
fill monitor histograms with electronId and jetCorrections
edm::EDGetTokenT< edm::View< reco::Jet > > jets_
input sources for monitoring
virtual void analyze(const edm::Event &event, const edm::EventSetup &setup)
do this during the event loop
std::unique_ptr< StringCutObjectSelector< reco::Vertex > > vertexSelect_
string cut selector
edm::EDGetTokenT< reco::Vertex > vertex__
MonitorEnsemble(const char *label, const edm::ParameterSet &cfg, const edm::VParameterSet &vcfg, edm::ConsumesCollector &&iC)
default contructor
edm::EDGetTokenT< reco::BeamSpot > beamspot__
std::unique_ptr< StringCutObjectSelector< reco::BeamSpot > > beamspotSelect_
string cut selector
std::map< std::string, std::pair< edm::ParameterSet, std::unique_ptr< SingleTopTChannelLepton::MonitorEnsemble > > > selection_
std::string jetCorrector_
jetCorrector
~MonitorEnsemble()
default destructor
void fill(const std::string histName, double value) const
fill histogram if it had been booked before
std::vector< std::unique_ptr< SelectionStep< reco::PFJet > > > PFJetSteps
DQMStore * store_
storage manager
void fill(const std::string histName, double xValue, double yValue) const
fill histogram if it had been booked before (2-dim version)
std::unique_ptr< SelectionStep< reco::Muon > > MuonStep
void setup(std::vector< TH2F > &depth, std::string name, std::string units="")
void book(std::string directory)
book histograms in subdirectory directory
Level
different verbosity levels
std::unique_ptr< SelectionStep< reco::PFCandidate > > PFMuonStep
std::string label_
instance label
std::string elecIso_
extra isolation criterion on electron