MultiChainEvent.cc

Go to the documentation of this file.

// -*- C++ -*-
//
// Package:     FWLite
// Class  :     MultiChainEvent
//
// Implementation:
//     <Notes on implementation>
//
// Original Author:  Salvatore Rappoccio
//         Created:  Thu Jul  9 22:05:56 CDT 2009
//

// system include files
#include <iostream>

// user include files
#include "DataFormats/FWLite/interface/MultiChainEvent.h"
#include "DataFormats/Common/interface/EDProductGetter.h"
#include "DataFormats/FWLite/interface/Handle.h"
#include "DataFormats/Common/interface/TriggerResults.h"
#include "DataFormats/Provenance/interface/ProcessHistory.h"
#include "FWCore/Common/interface/TriggerResultsByName.h"

namespace fwlite {

  namespace internal {

    class MultiProductGetter : public edm::EDProductGetter {
public:
      MultiProductGetter(MultiChainEvent const* iEvent) : event_(iEvent) {}

      virtual edm::WrapperHolder
      getIt(edm::ProductID const& iID) const override {
        return event_->getByProductID(iID);
      }

private:
      virtual unsigned int transitionIndex_() const override {
        return 0U;
      }

      MultiChainEvent const* event_;

    };
  }

//
// constants, enums and typedefs
//

//
// static data member definitions
//

//
// constructors and destructor
//
  MultiChainEvent::MultiChainEvent(std::vector<std::string> const& iFileNames1,
                   std::vector<std::string> const& iFileNames2,
                   bool useSecFileMapSorted)
{
  event1_ = boost::shared_ptr<ChainEvent> (new ChainEvent(iFileNames1));
  event2_ = boost::shared_ptr<ChainEvent> (new ChainEvent(iFileNames2));

  getter_ = boost::shared_ptr<internal::MultiProductGetter>(new internal::MultiProductGetter(this));

  event1_->setGetter(getter_);
  event2_->setGetter(getter_);

  useSecFileMapSorted_ = useSecFileMapSorted;

  if (!useSecFileMapSorted_) {
    std::cout << "------------------------------------------------------------------------" << std::endl;
    std::cout << "WARNING! What you are about to do may be very slow." << std::endl;
    std::cout << "The 2-file solution in FWLite works with very simple assumptions." << std::endl;
    std::cout << "It will linearly search through the files in the secondary file list for Products." << std::endl;
    std::cout << "There are speed improvements available to make this run faster." << std::endl;
    std::cout << "***If your secondary files are sorted with a run-range within a file, (almost always the case) " << std::endl;
    std::cout << "***please use the option useSecFileMapSorted=true in this constructor. " << std::endl;
    std::cout << "    > usage: MultiChainEvent(primaryFiles, secondaryFiles, true);" << std::endl;
    std::cout << "------------------------------------------------------------------------" << std::endl;

  }

  if (useSecFileMapSorted_) {

    std::cout << "------------------------------------------------------------------------" << std::endl;
    std::cout << "This MultiChainEvent is now creating a (run_range)_2 ---> file_index_2 map" << std::endl;
    std::cout << "for the 2-file solution. " << std::endl;
    std::cout << "This is assuming the files you are giving me are sorted by run,event pairs within each secondary file." << std::endl;
    std::cout << "If this is not true (rarely the case), set this option to false." << std::endl;
    std::cout << "    > usage: MultiChainEvent(primaryFiles, secondaryFiles, false);" << std::endl;
    std::cout << "------------------------------------------------------------------------" << std::endl;
    // speed up secondary file access with a (run,event)_1 ---> index_2 map


    // Loop over events, when a new file is encountered, store the first run number from this file,
    // and the last run number from the last file.
    TFile * lastFile = 0;
    std::pair<event_id_range,Long64_t> eventRange;
    bool firstFile = true;

    bool foundAny = false;

    for(event2_->toBegin();
     ! event2_->atEnd();
     ++(*event2_)) {
      // if we have a new file, cache the "first"
      if (lastFile != event2_->getTFile()) {

    // if this is not the first file, we have an entry.
    // Add it to the list.
    if (!firstFile) {
      foundAny = true;
      event_id_range toAdd = eventRange.first;
      secFileMapSorted_[ toAdd ] = eventRange.second;
    }
    // always add the "first" event id to the cached event range
    eventRange.first.first = event2_->event()->id();
    lastFile = event2_->getTFile();
      }
      // otherwise, cache the "second" event id in the cached event range.
      // Upon the discovery of a new file, this will be used as the
      // "last" event id in the cached event range.
      else {
    eventRange.first.second = event2_->event()->id();
    eventRange.second = event2_->eventIndex();
      }
      firstFile = false;
    }
    // due to the invailability of a "look ahead" operation, we have one additional "put" to make
    // after the loop (which puts the "last" event, not "this" event.
    if (foundAny) {
      event_id_range toAdd = eventRange.first;
      secFileMapSorted_[ toAdd ] = eventRange.second;
    }
//     std::cout << "Dumping run range to event id list:" << std::endl;
//     for (sec_file_range_index_map::const_iterator mBegin = secFileMapSorted_.begin(),
//      mEnd = secFileMapSorted_.end(),
//      mit = mBegin;
//    mit != mEnd; ++mit) {
//       char buff[1000];
//       event2_->to(mit->second);
//       sprintf(buff, "[%10d,%10d - %10d,%10d] ---> %10d",
//        mit->first.first.run(),
//        mit->first.first.event(),
//        mit->first.second.run(),
//        mit->first.second.event(),
//        mit->second);
//       std::cout << buff << std::endl;
//     }
  }

}

// MultiChainEvent::MultiChainEvent(const MultiChainEvent& rhs)
// {
//    // do actual copying here;
// }

MultiChainEvent::~MultiChainEvent()
{
}

//
// assignment operators
//
// const MultiChainEvent& MultiChainEvent::operator=(const MultiChainEvent& rhs)
// {
//   //An exception safe implementation is
//   MultiChainEvent temp(rhs);
//   swap(rhs);
//
//   return *this;
// }

//
// member functions
//

const MultiChainEvent&
MultiChainEvent::operator++()
{
   event1_->operator++();
   return *this;
}

bool
MultiChainEvent::to(Long64_t iIndex)
{
  return event1_->to(iIndex);
}


bool
MultiChainEvent::to(edm::EventID id)
{
  return to(id.run(), id.luminosityBlock(), id.event());
}

bool
MultiChainEvent::to(edm::RunNumber_t run, edm::LuminosityBlockNumber_t lumi, edm::EventNumber_t event)
{
   return event1_->to(run, lumi, event);
}

bool
MultiChainEvent::to(edm::RunNumber_t run, edm::EventNumber_t event)
{
   return to(run, 0U, event);
}


bool
MultiChainEvent::toSec(Long64_t iIndex)
{
   return event2_->to(iIndex);
}

// Go to event with event id "id"
bool
MultiChainEvent::toSec (const edm::EventID &id)
{
   // First try this file.
   if (event2_->event_->to(id))
   {
      // Found it, return.
      return true;
   }
   // Second, assume that the secondary files are each in run/event
   // order.  So, let's loop over all files and see if we can figure
   // out where the event ought to be.
   for (sec_file_range_index_map::const_iterator mBegin =
            secFileMapSorted_.begin(),
            mEnd = secFileMapSorted_.end(),
            mit = mBegin;
         mit != mEnd;
         ++mit)
   {
      if (id < mit->first.first || id > mit->first.second)
      {
         // We don't expect this event to be in this file, so don't
         // bother checking it right now.
         continue;
      }
      // If we're here, then we have a reasonable belief that this
      // event is in this secondary file.  This part is
      // expensive. switchToFile does memory allocations and opens the
      // files which becomes very time consuming. This should be done
      // as infrequently as possible.
      event2_->switchToFile(mit->second);
      // Is it here?
      if (event2_->to(id))
      {
         // Yes!
         return true;
      }
      // if we assumed that the secondary files were not each in
      // order, but were non-overlapping, we could break here.  But at
      // this point, we might as well keep going.
   } // for loop over files

   // if we are still here, then we did not find the id in question,
   // do it the old fashioned way.  This will open up each secondary
   // file and explicitly check to see if the event is there.
   if (event2_->to(id))
   {
      return true;
   }
   // if we're still here, then there really is no matching event in
   // the secondary files.  Throw.
   throw cms::Exception("ProductNotFound") << "Cannot find id "
                                           << id.run() << ", "
                                           << id.event()
                                           << " in secondary list. Exiting."
                                           << std::endl;
   // to make the compiler happy
   return false;
}

bool
MultiChainEvent::toSec(edm::RunNumber_t run, edm::LuminosityBlockNumber_t lumi, edm::EventNumber_t event)
{
  return toSec(edm::EventID(run, lumi, event));
}

// Go to the very first Event
bool
MultiChainEvent::toSec(edm::RunNumber_t run, edm::EventNumber_t event)
{
  return toSec(edm::EventID(run, 0U, event));
}

// Go to the very first Event
const MultiChainEvent&
MultiChainEvent::toBegin()
{
   event1_->toBegin();
   return *this;
}

//
// const member functions
//
std::string const
MultiChainEvent::getBranchNameFor(std::type_info const& iType,
                             char const* iModule,
                             char const* iInstance,
                             char const* iProcess) const
{
  return event1_->getBranchNameFor(iType,iModule,iInstance,iProcess);
}

std::vector<edm::BranchDescription> const&
MultiChainEvent::getBranchDescriptions() const
{
  return event1_->getBranchDescriptions();
}

std::vector<std::string> const&
MultiChainEvent::getProcessHistory() const
{
  return event1_->getProcessHistory();
}

edm::ProcessHistory const&
MultiChainEvent::processHistory() const
{
  return event1_->processHistory();
}

edm::EventAuxiliary const&
MultiChainEvent::eventAuxiliary() const
{
   return event1_->eventAuxiliary();
}

bool
MultiChainEvent::getByLabel(
                       std::type_info const& iType,
                       char const* iModule,
                       char const* iInstance,
                       char const* iProcess,
                       void* iValue) const
{
  bool ret1 = event1_->getByLabel(iType, iModule, iInstance, iProcess, iValue);
  if (!ret1) {
    (const_cast<MultiChainEvent*>(this))->toSec(event1_->id());
    bool ret2 = event2_->getByLabel(iType,iModule,iInstance,iProcess,iValue);
    if (!ret2) return false;
  }
  return true;
}

bool
MultiChainEvent::getByLabel(
                       std::type_info const& iType,
                       char const* iModule,
                       char const* iInstance,
                       char const* iProcess,
                       edm::WrapperHolder& holder) const {
  bool ret1 = event1_->getByLabel(iType, iModule, iInstance, iProcess, holder);
  if(!ret1) {
    (const_cast<MultiChainEvent*>(this))->toSec(event1_->id());
    bool ret2 = event2_->getByLabel(iType, iModule, iInstance, iProcess, holder);
    if(!ret2) return false;
  }
  return true;
}

edm::WrapperHolder MultiChainEvent::getByProductID(edm::ProductID const&iID) const
{
  // First try the first file
  edm::WrapperHolder edp = event1_->getByProductID(iID);
  // Did not find the product, try secondary file
  if (!edp.isValid()) {
    (const_cast<MultiChainEvent*>(this))->toSec(event1_->id());
    edp = event2_->getByProductID(iID);
    if (!edp.isValid()) {
      throw cms::Exception("ProductNotFound") << "Cannot find product " << iID;
    }
  }
  return edp;
}


bool
MultiChainEvent::isValid() const
{
  return event1_->isValid();
}
MultiChainEvent::operator bool() const
{
  return *event1_;
}

bool
MultiChainEvent::atEnd() const
{
  return event1_->atEnd();
}

Long64_t
MultiChainEvent::size() const
{
  return event1_->size();
}

edm::TriggerNames const&
MultiChainEvent::triggerNames(edm::TriggerResults const& triggerResults) const
{
  edm::TriggerNames const* names = triggerNames_(triggerResults);
  if (names != 0) return *names;

  event1_->fillParameterSetRegistry();
  names = triggerNames_(triggerResults);
  if (names != 0) return *names;

  // If we cannot find it in the primary file, this probably will
  // not help but try anyway
  event2_->to(event1_->id());
  event2_->fillParameterSetRegistry();
  names = triggerNames_(triggerResults);
  if (names != 0) return *names;

  throw cms::Exception("TriggerNamesNotFound")
    << "TriggerNames not found in ParameterSet registry";
  return *names;
}

edm::TriggerResultsByName
MultiChainEvent::triggerResultsByName(std::string const& process) const {

  fwlite::Handle<edm::TriggerResults> hTriggerResults;
  hTriggerResults.getByLabel(*this,"TriggerResults","",process.c_str());
  if (!hTriggerResults.isValid()) {
    return edm::TriggerResultsByName(0,0);
  }

  edm::TriggerNames const* names = triggerNames_(*hTriggerResults);

  if (names == 0) {
    event1_->fillParameterSetRegistry();
    names = triggerNames_(*hTriggerResults);
  }

  if (names == 0) {
    event2_->to(event1_->id());
    event2_->fillParameterSetRegistry();
    names = triggerNames_(*hTriggerResults);
  }

  return edm::TriggerResultsByName(hTriggerResults.product(), names);
}

//
// static member functions
//
void
MultiChainEvent::throwProductNotFoundException(std::type_info const& iType,
                                          char const* iModule,
                                          char const* iInstance,
                                          char const* iProcess) {
  ChainEvent::throwProductNotFoundException(iType,iModule,iInstance,iProcess);
}
}