#include <MeasurementDistancemeter3dim.h>

Inheritance diagram for MeasurementDistancemeter3dim:

Public Member Functions
virtual void	calculateSimulatedValue (ALIbool firstTime)

virtual void	correctValueAndSigma ()

	MeasurementDistancemeter3dim (const ALIint measdim, ALIstring &type, ALIstring &name)

	MeasurementDistancemeter3dim ()

virtual void	setConversionFactor (const std::vector< ALIstring > &wordlist)

	~MeasurementDistancemeter3dim ()

Public Member Functions inherited from Measurement
void	addAffectingEntriesFromOptO (const OpticalObject *optoP)

void	AddOptOListItem (OpticalObject *opto)

void	AddOptONameListItem (ALIstring optos)

const std::vector< Entry * > &	affectingEntryList () const

void	buildAffectingEntryList ()

void	buildOptOList ()

virtual void	buildOptONamesList (const std::vector< ALIstring > &wl)

void	calculateOriginalSimulatedValue ()

void	construct ()

void	constructFromOA (OpticalAlignMeasurementInfo &measInfo)

void	copyMeas (Measurement *meas, const std::string &subsstr1, const std::string &subsstr2)

std::vector< ALIdouble >	DerivativeRespectEntry (Entry *entry)

const ALIuint	dim () const

void	DumpBadOrderOptOs ()

void	fillData (ALIuint coor, const std::vector< ALIstring > &wl)

void	fillData (ALIuint coor, OpticalAlignParam *oaParam)

const CLHEP::Hep3Vector &	getLightRayDirection () const

const CLHEP::Hep3Vector &	getLightRayPosition () const

ALIstring	getMeasuringBehaviour (const std::vector< OpticalObject * >::const_iterator vocite)

const OpticalObject *	getPreviousOptO (const OpticalObject *Popto) const

	Measurement (const ALIint measdim, ALIstring &type, ALIstring &name)

	Measurement ()

const ALIstring &	name () const

const std::vector < OpticalObject * > &	OptOList () const

const std::vector< ALIstring > &	OptONameList () const

void	postConstruct ()

const ALIstring &	sensorName ()

void	SetDimension (ALIuint dim)

void	setLightRayDirection (const CLHEP::Hep3Vector &lightRayDirection)

void	setLightRayPosition (const CLHEP::Hep3Vector &lightRayPosition)

void	setName ()

void	setSigma (ALIint coor, ALIdouble val)

void	setType (ALIstring type)

void	setValue (ALIint coor, ALIdouble val)

void	setValueSimulated (ALIint coor, ALIdouble value)

void	setValueSimulated_orig (ALIint coor, ALIdouble value)

virtual void	setXlaserLine (ALIuint ii, int val)

const ALIdouble *	sigma () const

const ALIdouble	sigma (ALIuint ii) const

virtual const ALIdouble	sigmaDimensionFactor () const

const ALIstring &	type () const

const ALIdouble *	value () const

const ALIdouble	value (ALIuint ii) const

virtual const ALIdouble	valueDimensionFactor () const

bool	valueIsSimulated (ALIint coor)

const ALIdouble	valueSimulated (ALIuint ii) const

const ALIdouble	valueSimulated_orig (ALIuint ii) const

const ALIstring	valueType (ALIuint ii) const

virtual int	xlaserLine (ALIuint ii)

virtual	~Measurement ()

Private Attributes
ALIdouble	theFactor

ALIdouble	theFactorSigma

Additional Inherited Members
Static Public Member Functions inherited from Measurement
static ALIstring	getCurrentDate ()

static ALIstring	getCurrentTime ()

static ALIstring &	measurementsFileName ()

static void	setCurrentDate (const std::vector< ALIstring > &wl)
	set the date of the current measurement More...

static void	setMeasurementsFileName (const ALIstring &filename)

Static Public Attributes inherited from Measurement
static ALIdouble	cameraScaleFactor = 1.

static ALIbool	only1 = 0

static ALIstring	only1Date = ""

static ALIstring	only1Time = ""

Protected Member Functions inherited from Measurement
void	printStartCalculateSimulatedValue (const Measurement *meas)

void	Substitute2p (ALIstring &ref, const ALIstring &firstref, int NtwoPoints)

Detailed Description

Definition at line 18 of file MeasurementDistancemeter3dim.h.

Constructor & Destructor Documentation

MeasurementDistancemeter3dim::MeasurementDistancemeter3dim	(	const ALIint	measdim,
		ALIstring &	type,
		ALIstring &	name
	)

inline

Definition at line 21 of file MeasurementDistancemeter3dim.h.

22 : Measurement( measdim, type, name ), theFactor(1.), theFactorSigma(0.){ };

type

Definition: HCALResponse.h:21

Measurement::Measurement

Measurement()

Definition: Measurement.h:32

MeasurementDistancemeter3dim::theFactorSigma

ALIdouble theFactorSigma

Definition: MeasurementDistancemeter3dim.h:37

MeasurementDistancemeter3dim::theFactor

ALIdouble theFactor

Definition: MeasurementDistancemeter3dim.h:36

Measurement::name

const ALIstring & name() const

Definition: Measurement.h:90

MeasurementDistancemeter3dim::MeasurementDistancemeter3dim ( )

inline

Definition at line 23 of file MeasurementDistancemeter3dim.h.

23 { };

MeasurementDistancemeter3dim::~MeasurementDistancemeter3dim ( )

inline

Definition at line 24 of file MeasurementDistancemeter3dim.h.

24 { };

Member Function Documentation

void MeasurementDistancemeter3dim::calculateSimulatedValue ( ALIbool firstTime )

virtual

Reimplemented from Measurement.

Definition at line 26 of file MeasurementDistancemeter3dim.cc.

References begin, dtNoiseDBValidation_cfg::cerr, gather_cfg::cout, ALIUtils::debug, Measurement::DumpBadOrderOptOs(), cppFunctionSkipper::exception, ALIUtils::getFirstTime(), GlobalOptionMgr::getInstance(), Measurement::getMeasuringBehaviour(), GlobalOptionMgr::GlobalOptions(), Measurement::name(), Measurement::OptOList(), LightRay::point(), Measurement::printStartCalculateSimulatedValue(), findQualityFiles::size, and Measurement::type().

 {
  
   if( ALIUtils::debug >= 2) printStartCalculateSimulatedValue( this ); // important for Examples/FakeMeas
 
   //---------- Loop list of OptO that take part in measurement
   std::vector<OpticalObject*>::const_iterator vocite =  OptOList().begin();
   if( ALIUtils::debug >= 5) std::cout  << "OptOList size" <<OptOList().size() << std::endl;
 
   //----- Check that there are only two measurements that are 'distance_target' and 'distancemeter3dim'
   ALIbool right_objects = 0;
   if( OptOList().size() == 2 ) {
     if( (*vocite)->type() == "distance_target"
     && ( (*(vocite+1))->type() == "distancemeter3dim" ) ) { 
       right_objects = 1;
     } 
   }
   if( !right_objects ) {
     std::cerr << "!!! ERROR in MeasurementDistancemeter3dim: " << name() << " There should only be two objects of type 'distance_target' and 'distancemeter3dim' " << std::endl;
  std::cerr   << " 1st " << (*vocite)->name() << " 2nd " << (*vocite+1)->name()  << std::endl;
     std::cerr << " 1st " << (*vocite)->type() << " 2nd " << (*vocite+1)->type() << std::endl;
 
     DumpBadOrderOptOs();
     std::exception();
   }     
 
 #ifdef COCOA_VIS
   ALIVisLightPath* vispath = 0;
   if( ALIUtils::getFirstTime() ) {
     GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
     if(gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
       vispath = IgCocoaFileMgr::getInstance().newLightPath( name() );
     } 
   }
 #endif
 
   ALIuint isec = 0;  //security variable to check OptOList().size()
   for( vocite = OptOList().begin(); vocite != OptOList().end(); vocite++) {
     if( ALIUtils::debug >= 2) std::cout << std::endl << "@@@@ LR:OBJECT " << (*vocite)->name() << std::endl;  
     isec ++;
 
     //---------- Get the behaviour of the object w.r.t the measurement (if it reflects the light, let it traverse it, ...)
     ALIstring behav = getMeasuringBehaviour(vocite);
 
     //---------- participate in measurement
     LightRay lightray;  //it is not used in this measurement type
     (*vocite)->participateInMeasurement( lightray, *this, behav);
 
 #ifdef COCOA_VIS
     if( ALIUtils::getFirstTime() ) {
       GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
       if(gomgr->GlobalOptions()["VisWriteVRML"] > 1) {
     ALIVRMLMgr::getInstance().addLightPoint( lightray.point() );
     if(ALIUtils::debug >= 5)std::cout << "ALIVRMLMg  addLightPoint " << lightray.point()  << (*vocite)->name() << std::endl;
       }
       if(gomgr->GlobalOptions()["VisWriteIguana"] > 1) {
     vispath->addLightPoint( lightray.point(), *vocite );
       }
     }
 #endif    
 
     if ( isec > OptOList().size() ) {
       std::cerr << "ERROR DE PROGRAMACION EN GetSimulatedValue" << std::endl;
       std::exception();
     }
   }
   
   if(ALIUtils::debug >= 5) std::cout << "end calculateSimulatedValue" <<std::endl;
   
 }

void MeasurementDistancemeter3dim::correctValueAndSigma ( )

virtual

Reimplemented from Measurement.

Definition at line 138 of file MeasurementDistancemeter3dim.cc.

References gather_cfg::cout, ALIUtils::debug, Measurement::setSigma(), Measurement::setValue(), Measurement::sigma(), theFactor, and Measurement::value().

 {
   ALIdouble val = value()[0];
   ALIdouble sig = sigma()[0];
   if(ALIUtils::debug >= 4) std::cout << "MeasurementDistancemeter3dim::correctValueAndSigma: old value" << val << " +- " << sig << std::endl;
 
   //- std::cout << "FACTOR " << theFactor << "correct " << val << " "  << thePedestal << std::endl; 
   val *= theFactor; 
   //-------- Do not correct the sigma!!!!
   //-  sig *= theFactor; 
   if(ALIUtils::debug >= 4) std::cout << "MeasuremenDistancemeter3dim::correctValueAndSigma: new value " << val << " +- " << sig << std::endl;
   setValue( 0, val );
   setSigma( 0, sig );
 
 }

void MeasurementDistancemeter3dim::setConversionFactor ( const std::vector< ALIstring > & wordlist )

virtual

Reimplemented from Measurement.

Definition at line 103 of file MeasurementDistancemeter3dim.cc.

References dtNoiseDBValidation_cfg::cerr, ALIUtils::dumpVS(), cppFunctionSkipper::exception, GlobalOptionMgr::getInstance(), GlobalOptionMgr::GlobalOptions(), ALIUtils::IsNumber(), theFactor, and theFactorSigma.

 {
   //--------- Check that the format is OK
   if(wordlist.size() == 1) return; 
   if( wordlist.size() != 4
     || !ALIUtils::IsNumber(wordlist[1]) || !ALIUtils::IsNumber(wordlist[3]) 
     || wordlist[2] != ALIstring("+-") ){  
     std::cerr << "!! Distancemeter3dim Measurement setConversionFactor: WRONG FORMAT "<<  std::endl 
      << "It should be: DISTANCEMETER3DIM factor +- error " << std::endl 
      << "It is: ";
     ALIUtils::dumpVS( wordlist, " ", std::cerr );
     std::exception();
   }
   theFactor = atof(wordlist[1].c_str());
   //------ correct by dimension of value of tiltmeter
   GlobalOptionMgr* gomgr = GlobalOptionMgr::getInstance();
   ALIint dimfac = ALIint( gomgr->GlobalOptions()[ ALIstring("distancemeter_meas_value_dimension") ] );
   if( dimfac == 0 ) {
     theFactor *= 1.;
   } else if( dimfac == 1 ) {
     theFactor *= 1.E-3;
   } else if( dimfac == 2 ) {
     theFactor *= 1.E-6;
   } else {
     std::cerr << " !!!EXITING: error in global option distancemeter3dim_meas_value_dimension, it can only take values 0,1,2, not " << dimfac;
     std::exception();
   }
   theFactorSigma = atof(wordlist[3].c_str());
 
 }

Member Data Documentation

ALIdouble MeasurementDistancemeter3dim::theFactor

private

Definition at line 36 of file MeasurementDistancemeter3dim.h.

Referenced by correctValueAndSigma(), and setConversionFactor().

ALIdouble MeasurementDistancemeter3dim::theFactorSigma

private

Definition at line 37 of file MeasurementDistancemeter3dim.h.

Referenced by setConversionFactor().

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation