DDHCalEndcapAlgo Class Reference

#include <DDHCalEndcapAlgo.h>

Inheritance diagram for DDHCalEndcapAlgo:

Public Member Functions
	DDHCalEndcapAlgo ()
int	equipModule (unsigned int i) const
void	execute (DDCompactView &cpv)
std::string	getAbsMat () const
double	getAngBot () const
double	getAngGap () const
double	getAngTop () const
double	getDrEnd () const
double	getDzShift () const
double	getDzStep () const
int	getEndcaps () const
std::string	getGenMat () const
double	getHeboxDepth () const
int	getLayer (unsigned int i, unsigned int j) const
int	getLayerN (unsigned int i) const
std::string	getLayerName (unsigned int i) const
int	getLayers () const
double	getLayerT (unsigned int i) const
int	getLayerType (unsigned int i) const
std::string	getModMat (unsigned int i) const
std::string	getModName (unsigned int i) const
int	getModType (unsigned int i) const
int	getModules () const
int	getNsectors () const
int	getNsectortot () const
int	getPhi () const
std::string	getPhiName (unsigned int i) const
std::string	getPlastMat () const
double	getRinBlock1 (unsigned i) const
double	getRinBlock2 (unsigned i) const
double	getRinDip () const
double	getRinKink () const
std::string	getRotation () const
std::string	getRotMat () const
double	getRout () const
double	getRoutBlock1 (unsigned i) const
double	getRoutBlock2 (unsigned i) const
double	getRoutDip () const
std::string	getScintMat () const
double	getScintT (unsigned int i) const
int	getSectionModule (unsigned i) const
double	getSlope () const
double	getThick (unsigned int i) const
double	getTolAbs () const
double	getTolPos () const
double	getTrim (unsigned int i, unsigned int j) const
double	getZ0Beam () const
double	getZ1Beam () const
double	getZEnd () const
double	getZFront () const
double	getZiBody () const
double	getZiDip () const
double	getZiKink () const
double	getZiL0Body () const
double	getZiL0Nose () const
double	getZiNose () const
double	getZmaxBlock (unsigned i) const
double	getZminBlock (unsigned i) const
double	getZShift () const
double	getZShiftHac2 () const
void	initialize (const DDNumericArguments &nArgs, const DDVectorArguments &vArgs, const DDMapArguments &mArgs, const DDStringArguments &sArgs, const DDStringVectorArguments &vsArgs)
virtual	~DDHCalEndcapAlgo ()

Protected Member Functions
void	constructGeneralVolume (DDCompactView &cpv)
void	constructInsideModule (DDLogicalPart module, int mod, DDCompactView &cpv)
void	constructInsideModule0 (DDLogicalPart module, int mod, DDCompactView &cpv)
void	constructInsideSector (DDLogicalPart sector, DDCompactView &cpv)
void	constructScintLayer (DDLogicalPart glog, double pDz, double yh, double bl, double tl, double alp, std::string name, int id, DDCompactView &cpv)
void	parameterLayer (int iphi, double rinF, double routF, double rinB, double routB, double zi, double zo, double &yh1, double &bl1, double &tl1, double &yh2, double &bl2, double &tl2, double &alp, double &theta, double &phi, double &xpos, double &ypos, double &zcpv)
void	parameterLayer0 (int mod, int layer, int iphi, double &yh, double &bl, double &tl, double &alp, double &xpos, double &ypos, double &zcpv)

Private Attributes
std::string	absMat
double	angBot
double	angGap
double	angTop
double	drEnd
double	dzShift
double	dzStep
std::vector< int >	eModule
std::string	genMaterial
double	heboxDepth
std::string	idName
std::string	idNameSpace
int	idOffset
std::vector< int >	layerN
std::vector< int >	layerN0
std::vector< int >	layerN1
std::vector< int >	layerN2
std::vector< int >	layerN3
std::vector< int >	layerN4
std::vector< int >	layerN5
std::vector< std::string >	layerName
int	layers
std::vector< double >	layerT
std::vector< int >	layerType
std::vector< std::string >	modMat
std::vector< std::string >	modName
std::vector< int >	modType
int	modules
int	nEndcap
int	nsectors
int	nsectortot
std::vector< std::string >	phiName
int	phiSections
std::string	plastMat
double	riDip
double	riKink
std::vector< double >	rinBlock1
std::vector< double >	rinBlock2
double	roDip
std::string	rotation
std::string	rotHalf
std::string	rotmat
std::string	rotns
double	rout
std::vector< double >	routBlock1
std::vector< double >	routBlock2
std::string	scintMat
std::vector< double >	scintT
std::vector< int >	sectionModule
double	slope
std::vector< double >	thick
double	tolAbs
double	tolPos
std::vector< double >	trimLeft
std::vector< double >	trimRight
double	z0Beam
double	z1Beam
double	zEnd
double	zFront
double	ziBody
double	ziDip
double	ziKink
double	ziL0Body
double	ziL0Nose
double	ziNose
std::vector< double >	zmaxBlock
std::vector< double >	zminBlock
double	zShift
double	zShiftHac2

Detailed Description

Definition at line 10 of file DDHCalEndcapAlgo.h.

Constructor & Destructor Documentation

DDHCalEndcapAlgo::DDHCalEndcapAlgo

(

)

Definition at line 22 of file DDHCalEndcapAlgo.cc.

References LogDebug.

                                  :
  modMat(0),modType(0),sectionModule(0),layerN(0),layerN0(0),layerN1(0),
  layerN2(0),layerN3(0),layerN4(0),layerN5(0),thick(0),trimLeft(0),
  trimRight(0),zminBlock(0),zmaxBlock(0),rinBlock1(0),routBlock1(0),
  rinBlock2(0),routBlock2(0),layerType(0),layerT(0),scintT(0) {
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo info: Creating an instance";
}

DDHCalEndcapAlgo::~DDHCalEndcapAlgo ( )

virtual

Definition at line 30 of file DDHCalEndcapAlgo.cc.

{}

Member Function Documentation

void DDHCalEndcapAlgo::constructGeneralVolume ( DDCompactView &  cpv )

protected

!!!!!!!!!!!!!!!!Should be zero. And removed as soon as

Definition at line 323 of file DDHCalEndcapAlgo.cc.

References alpha, constructInsideSector(), dbl_to_string(), DDrot(), DDSplit(), equipModule(), first, getAbsMat(), getAngBot(), getAngTop(), getDrEnd(), getDzShift(), getEndcaps(), getGenMat(), getNsectors(), getNsectortot(), getRinDip(), getRinKink(), getRotation(), getRout(), getRoutDip(), getSlope(), getZ1Beam(), getZEnd(), getZFront(), getZiBody(), getZiDip(), getZiKink(), getZiL0Body(), getZShift(), getZShiftHac2(), i, idName, idNameSpace, cuy::ii, LogDebug, mergeVDriftHistosByStation::name, DDBase< N, C >::name(), dbtoconf::parent, phi, pi, DDSolidFactory::polyhedra(), DDCompactView::position(), makeMuonMisalignmentScenario::rot, rotation, rotHalf, rotns, edm::second(), and funct::tan().

Referenced by execute().

                                                                {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: General volume...";
  bool proto = true;
  for (int i=0; i<3; i++) 
    if (equipModule(i) > 0) proto = false;

  DDRotation    rot;
  if (DDSplit(getRotation()).first == "NULL") rot = DDRotation();
  else rot = DDRotation(DDName(DDSplit(getRotation()).first,DDSplit(getRotation()).second));
  LogDebug("HCalGeom") << " First " << DDSplit(getRotation()).first
               << " Second " << DDSplit(getRotation()).second 
               << " Rotation " << rot;
  DDTranslation r0(0,0,getZShift());
  double alpha = CLHEP::pi/getNsectors();
  double dphi  = getNsectortot()*CLHEP::twopi/getNsectors();

  //vertical walls are allowed in SolidPolyhedra
  double delz = 0;

  vector<double> pgonZ, pgonRmin, pgonRmax;
  if (proto) {
    double zf = getZiBody() + getZShiftHac2();
    pgonZ.push_back(zf - getDzShift()); 
    pgonRmin.push_back(zf * tan(getAngBot())); 
    pgonRmax.push_back((zf - getZ1Beam())*getSlope()); 
  } else {
    pgonZ.push_back(getZFront()   - getDzShift()); 
    pgonRmin.push_back(getZFront()   * tan(getAngTop())); 
    pgonRmax.push_back((getZFront()   - getZ1Beam())*getSlope()); 
    pgonZ.push_back(getZiL0Body() - getDzShift()); 
    pgonRmin.push_back(getZiL0Body() * tan(getAngTop())); 
    pgonRmax.push_back((getZiL0Body() - getZ1Beam())*getSlope()); 
    pgonZ.push_back(getZiL0Body() - getDzShift()); 
    pgonRmin.push_back(getZiL0Body() * tan(getAngBot())); 
    pgonRmax.push_back((getZiL0Body() - getZ1Beam())*getSlope()); 
  }
  pgonZ.push_back(getZiKink()   - getDzShift()); 
  pgonRmin.push_back(getRinKink()); 
  pgonRmax.push_back(getRout()); 
  pgonZ.push_back(getZiDip()    - getDzShift()); 
  pgonRmin.push_back(getRinDip()); 
  pgonRmax.push_back(getRout()); 
  pgonZ.push_back(getZiDip()    - getDzShift() + delz); 
  pgonRmin.push_back(getRinDip()); 
  pgonRmax.push_back(getRoutDip()); 
  pgonZ.push_back(getZEnd()     - getDzShift()); 
  pgonRmin.push_back(getZEnd() * tan(getAngBot())); 
  pgonRmax.push_back(getRoutDip()); 
  pgonZ.push_back(getZEnd()); 
  pgonRmin.push_back(getZEnd() * tan(getAngBot())); 
  pgonRmax.push_back(getRoutDip()); 

  string name("Null");
  unsigned int i=0;
  DDSolid solid;
  solid = DDSolidFactory::polyhedra(DDName(idName, idNameSpace),
                    getNsectortot(), -alpha, dphi, pgonZ, 
                    pgonRmin, pgonRmax);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
               << DDName(idName, idNameSpace) << " Polyhedra made of "
               << getGenMat() << " with " << getNsectortot() 
               << " sectors from " << -alpha/CLHEP::deg << " to " 
               << (-alpha+dphi)/CLHEP::deg << " and with " 
               << pgonZ.size() << " sections";
  for (i = 0; i <pgonZ.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZ[i] << "\tRmin = " <<pgonRmin[i]
             << "\tRmax = " << pgonRmax[i];

  DDName matname(DDSplit(getGenMat()).first, DDSplit(getGenMat()).second); 
  DDMaterial matter(matname);
  DDLogicalPart genlogic(DDName(idName, idNameSpace), matter, solid);

  DDName parentName = parent().name(); 
  cpv.position(DDName(idName, idNameSpace), parentName, 1, r0, rot);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
               << DDName(idName, idNameSpace) << " number 1 positioned"
               << " in " << parentName << " at " << r0 << " with " 
               << rot;
  if (getEndcaps() != 1) {
    rot = DDRotation(DDName(rotHalf,rotns));
   cpv.position(DDName(idName, idNameSpace), parentName, 2, r0, rot);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
             << DDName(idName, idNameSpace) << " number 2 "
             << "positioned in " << parentName  << " at " << r0
             << " with " << rot;
  }

  //Forward half
  name  = idName + "Front";
  vector<double> pgonZMod, pgonRminMod, pgonRmaxMod;
  for (i=0; i < (pgonZ.size()-1); i++) {
    pgonZMod.push_back(pgonZ[i] + getDzShift()); 
    pgonRminMod.push_back(pgonRmin[i]); 
    pgonRmaxMod.push_back(pgonRmax[i]); 
  }
  solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace),
                    getNsectortot(), -alpha, dphi, pgonZMod,
                    pgonRminMod, pgonRmaxMod);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
               << " Polyhedra made of " << getGenMat() << " with "
               << getNsectortot() << " sectors from " 
               << -alpha/CLHEP::deg << " to " 
               << (-alpha+dphi)/CLHEP::deg << " and with "
               << pgonZMod.size() << " sections ";
  for (i = 0; i < pgonZMod.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZMod[i] << "\tRmin = " 
             << pgonRminMod[i] << "\tRmax = " << pgonRmaxMod[i];
  DDLogicalPart genlogich(DDName(name, idNameSpace), matter, solid);

  cpv.position(genlogich, genlogic, 1, DDTranslation(0.0, 0.0, -getDzShift()),
    DDRotation());
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << genlogich.name() 
               << " number 1 positioned in " << genlogic.name() 
               << " at (0,0," << -getDzShift() << ") with no rotation";
  
  //Construct sector (from -alpha to +alpha)
  name  = idName + "Module";
  solid =   DDSolidFactory::polyhedra(DDName(name, idNameSpace),
                      1, -alpha, 2*alpha, pgonZMod,
                      pgonRminMod, pgonRmaxMod);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
               << " Polyhedra made of " << getGenMat() 
               <<" with 1 sector from " << -alpha/CLHEP::deg << " to " 
               << alpha/CLHEP::deg << " and with " << pgonZMod.size() 
               << " sections";
  for (i = 0; i < pgonZMod.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZMod[i] << "\tRmin = " 
             << pgonRminMod[i] << "\tRmax = " << pgonRmaxMod[i];

  DDLogicalPart seclogic(DDName(name, idNameSpace), matter, solid);
  
  for (int ii=0; ii<getNsectortot(); ii++) {
    double phi    = ii*2*alpha;
    double phideg = phi/CLHEP::deg;
    
    DDRotation rotation;
    string rotstr("NULL");
    if (phideg != 0) {
      rotstr = "R"; 
      if (phideg < 100) rotstr = "R0"; 
      rotstr = rotstr + dbl_to_string(phideg);
      rotation = DDRotation(DDName(rotstr, rotns)); 
      if (!rotation) {
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Creating a new "
                 << "rotation " << rotstr << "\t" << 90 << "," 
                 << phideg << ","  << 90 << "," << (phideg+90)
                 << ", 0, 0";
    rotation = DDrot(DDName(rotstr, rotns), 90*CLHEP::deg, 
             phideg*CLHEP::deg, 90*CLHEP::deg, 
             (90+phideg)*CLHEP::deg, 0*CLHEP::deg,  0*CLHEP::deg);
      } //if !rotation
    } //if phideg!=0
  
   cpv.position(seclogic, genlogich, ii+1, DDTranslation(0.0, 0.0, 0.0), rotation);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << seclogic.name() 
             << " number " << ii+1 << " positioned in " 
             << genlogich.name() << " at (0,0,0) with " <<rotation;
  }
  
  //Construct the things inside the sector
  constructInsideSector(seclogic, cpv);

  //Backward half
  name  = idName + "Back";
  vector<double> pgonZBack, pgonRminBack, pgonRmaxBack;
  pgonZBack.push_back(getZEnd() - getDzShift()); 
  pgonRminBack.push_back(pgonZBack[0]*tan(getAngBot()) + getDrEnd()); 
  pgonRmaxBack.push_back(getRoutDip()); 
  pgonZBack.push_back(getZEnd()); 
  pgonRminBack.push_back(pgonZBack[1]*tan(getAngBot()) + getDrEnd()); 
  pgonRmaxBack.push_back(getRoutDip()); 
  solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace),
                    getNsectortot(), -alpha, dphi, pgonZBack,
                    pgonRminBack, pgonRmaxBack);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
               << " Polyhedra made of " << getAbsMat() << " with " 
               << getNsectortot() << " sectors from " 
               << -alpha/CLHEP::deg << " to " 
               << (-alpha+dphi)/CLHEP::deg << " and with " 
               << pgonZBack.size()  << " sections";
  for (i = 0; i < pgonZBack.size(); i++) 
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZBack[i] << "\tRmin = " 
             << pgonRminBack[i] << "\tRmax = " << pgonRmaxBack[i];
  DDName absMatname(DDSplit(getAbsMat()).first, DDSplit(getAbsMat()).second); 
  DDMaterial absMatter(absMatname);
  DDLogicalPart glog(DDName(name, idNameSpace), absMatter, solid);

  cpv.position(glog, genlogic, 1, DDTranslation(0.0, 0.0, 0.0), DDRotation());
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
               << " number 1 positioned in "  << genlogic.name() 
               << " at (0,0,0) with no rotation";
}

void DDHCalEndcapAlgo::constructInsideModule ( DDLogicalPart  module, int  mod, DDCompactView &  cpv  )

protected

Definition at line 781 of file DDHCalEndcapAlgo.cc.

References alpha, constructScintLayer(), DDBase< N, C >::ddname(), DDSplit(), first, getAngBot(), getAngTop(), getDzStep(), getGenMat(), getLayer(), getLayerN(), getLayerName(), getLayerT(), getLayerType(), getModName(), getNsectors(), getPhi(), getPhiName(), getPlastMat(), getRotMat(), getRoutBlock2(), getScintT(), getSlope(), getThick(), getTrim(), getZ1Beam(), getZminBlock(), i, idNameSpace, idOffset, LogDebug, mod(), DDName::name(), mergeVDriftHistosByStation::name, DDBase< N, C >::name(), parameterLayer(), phi, pi, DDCompactView::position(), diffTwoXMLs::r1, diffTwoXMLs::r2, makeMuonMisalignmentScenario::rot, rotns, edm::second(), funct::tan(), theta(), and DDSolidFactory::trap().

Referenced by constructInsideSector().

                                                                                              {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: \t\tInside module ..." <<mod;

  //Pointers to the Rotation Matrices and to the Materials
  string rotstr = getRotMat();
  DDRotation rot(DDName(rotstr, rotns));
  DDName matName(DDSplit(getGenMat()).first, DDSplit(getGenMat()).second);
  DDMaterial matter(matName);
  DDName plasName(DDSplit(getPlastMat()).first, DDSplit(getPlastMat()).second);
  DDMaterial matplastic(plasName);

  double  alpha = CLHEP::pi/getNsectors();
  double  zi    = getZminBlock(mod);

  for (int i = 0; i < getLayerN(mod); i++) {
    string name;
    DDSolid solid;
    DDLogicalPart glog, plog;
    int     layer  = getLayer(mod,i);
    double  zo     = zi + 0.5*getDzStep();

    for (int iphi = 0; iphi < getPhi(); iphi++) {
      double  ziAir = zo - getThick(mod);
      double  rinF, rinB;
      if (layer == 1) {
        rinF  = ziAir * tan(getAngTop());
        rinB  = zo    * tan(getAngTop());
      } else {
        rinF  = ziAir * tan(getAngBot());
        rinB  = zo    * tan(getAngBot());
      }
      double routF = (ziAir - getZ1Beam()) * getSlope();
      double routB = (zo    - getZ1Beam()) * getSlope();
      if (routF > getRoutBlock2(mod)) routF =  getRoutBlock2(mod);
      if (routB > getRoutBlock2(mod)) routB =  getRoutBlock2(mod);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Layer " << i << " Phi "
               << iphi << " Front " << ziAir << ", " << rinF
               << ", " << routF << " Back " << zo << ", " << rinB
               << ", " << routB;
      double yh1, bl1, tl1, yh2, bl2, tl2, theta, phi, alp;
      double xpos, ypos, zpos;
      parameterLayer(iphi, rinF, routF, rinB, routB, ziAir, zo, yh1, bl1, tl1, 
                     yh2, bl2, tl2, alp, theta, phi, xpos, ypos, zpos);
      
      name = module.name().name()+getLayerName(layer)+getPhiName(iphi)+"Air";
      solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                   0.5*getThick(mod), theta, phi, yh1,
                   bl1, tl1, alp, yh2, bl2, tl2, alp);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
               << " Trap made of " << getGenMat() 
               << " of dimensions " << 0.5*getThick(mod) << ", " 
               << theta/CLHEP::deg << ", " << phi/CLHEP::deg
               << ", " << yh1 << ", " << bl1 << ", " << tl1 << ", "
               << alp/CLHEP::deg << ", " << yh2 << ", " << bl2 
               << ", " << tl2 << ", " << alp/CLHEP::deg;
      glog = DDLogicalPart(solid.ddname(), matter, solid);

      DDTranslation r1(xpos, ypos, zpos);
      cpv.position(glog, module, layer+1, r1, rot);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
               << " number " << layer+1 << " positioned in " 
               << module.name() << " at " << r1 << " with " << rot;

      //Now the plastic with scintillators
      double yh = 0.5 * (routF - rinB) - getTrim(mod,iphi);
      double bl = 0.5 * rinB  * tan(alpha) - getTrim(mod,iphi);
      double tl = 0.5 * routF * tan(alpha) - getTrim(mod,iphi);
      name = module.name().name()+getLayerName(layer)+getPhiName(iphi);
      solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                   0.5*getLayerT(layer), 0, 0, yh,
                   bl, tl, alp, yh, bl, tl, alp);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
               << " Trap made of " << getPlastMat() 
               << " of dimensions " << 0.5*getLayerT(layer) 
               << ", 0, 0, " << yh << ", " << bl << ", " << tl
               << ", " << alp/CLHEP::deg << ", " << yh << ", " 
               << bl << ", " << tl << ", " << alp/CLHEP::deg;
      plog = DDLogicalPart(solid.ddname(), matplastic, solid);

      ypos = 0.5*(routF+rinB) - xpos;
      DDTranslation r2(0., ypos, 0.);
      cpv.position(plog, glog, idOffset+layer+1, r2, DDRotation());
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << plog.name() 
               << " number " << idOffset+layer+1 
               << " positioned in " << glog.name() << " at " << r2
               << " with no rotation";

      //Constructin the scintillators inside
      int copyNo = layer*10 + getLayerType(layer);
      name = getModName(mod)+getLayerName(layer)+getPhiName(iphi);
      constructScintLayer (plog, getScintT(layer), yh,bl,tl, alp,name,copyNo, cpv);
      zo += 0.5*getDzStep();
    } // End of loop over phi indices
    zi = zo - 0.5*getDzStep();
  }   // End of loop on layers
}

void DDHCalEndcapAlgo::constructInsideModule0 ( DDLogicalPart  module, int  mod, DDCompactView &  cpv  )

protected

Definition at line 686 of file DDHCalEndcapAlgo.cc.

References constructScintLayer(), DDBase< N, C >::ddname(), DDSplit(), first, getAbsMat(), getAngBot(), getAngTop(), getDzStep(), getLayer(), getLayerName(), getLayerT(), getLayerType(), getModName(), getPhi(), getPhiName(), getPlastMat(), getRotMat(), getScintT(), getSlope(), getThick(), getTolAbs(), getZ1Beam(), getZminBlock(), idNameSpace, idOffset, LogDebug, mod(), DDName::name(), mergeVDriftHistosByStation::name, DDBase< N, C >::name(), parameterLayer(), parameterLayer0(), phi, DDCompactView::position(), diffTwoXMLs::r1, diffTwoXMLs::r2, makeMuonMisalignmentScenario::rot, rotns, edm::second(), funct::tan(), theta(), and DDSolidFactory::trap().

Referenced by constructInsideSector().

                                                                                               {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: \t\tInside module0 ..."<<mod;

  //Pointers to the Rotation Matrices and to the Materials
  string rotstr = getRotMat();
  DDRotation rot(DDName(rotstr, rotns));
  DDName matName(DDSplit(getAbsMat()).first, DDSplit(getAbsMat()).second);
  DDMaterial matabsorbr(matName);
  DDName plasName(DDSplit(getPlastMat()).first, DDSplit(getPlastMat()).second);
  DDMaterial matplastic(plasName);

  int     layer  = getLayer(mod,0);
  int     layer0 = getLayer(mod,1);
  string  name;
  double  xpos, ypos, zpos;
  DDSolid solid;
  DDLogicalPart glog, plog;
  for (int iphi = 0; iphi < getPhi(); iphi++) {
    double yh, bl, tl, alp;
    parameterLayer0(mod, layer, iphi, yh, bl, tl, alp, xpos, ypos, zpos);
    name = module.name().name()+getLayerName(layer)+getPhiName(iphi);
    solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                 0.5*getLayerT(layer), 0, 0, yh,
                 bl, tl, alp, yh, bl, tl, alp);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
             << " Trap made of " << getPlastMat() 
             << " of dimensions " << 0.5*getLayerT(layer) 
             << ", 0, 0, " << yh << ", " << bl << ", " << tl 
             << ", " << alp/CLHEP::deg << ", " << yh << ", " << bl 
             << ", " << tl << ", " << alp/CLHEP::deg;
    glog = DDLogicalPart(solid.ddname(), matplastic, solid);

    DDTranslation r1(xpos, ypos, zpos);
    cpv.position(glog, module, idOffset+layer+1, r1, rot);
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
             << " number " << idOffset+layer+1 << " positioned in "
             << module.name() << " at " << r1 << " with " << rot;
    //Now construct the layer of scintillator inside this
    int copyNo = layer0*10 + getLayerType(layer);
    name = getModName(mod)+getLayerName(layer)+getPhiName(iphi);
    constructScintLayer (glog, getScintT(layer), yh, bl, tl, alp, name, copyNo, cpv);
  }

  //Now the absorber layer
  double zi = getZminBlock(mod) + getLayerT(layer);
  double zo = zi + 0.5*getDzStep();
  double rinF, routF, rinB, routB;
  if (mod == 0) {
    rinF  = zi * tan(getAngTop());
    routF =(zi - getZ1Beam()) * getSlope();
    rinB  = zo * tan(getAngTop());
    routB =(zo - getZ1Beam()) * getSlope();
  } else {
    rinF  = zi * tan(getAngBot());
    routF = zi * tan(getAngTop());
    rinB  = zo * tan(getAngBot());
    routB = zo * tan(getAngTop());
  }
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Module " << mod << " Front "
               << zi << ", " << rinF << ", " << routF << " Back "
               << zo << ", " << rinB << ", " << routB;
  double yh1, bl1, tl1, yh2, bl2, tl2, theta, phi, alp;
  parameterLayer(0, rinF, routF, rinB, routB, zi, zo, yh1, bl1, tl1, yh2, bl2, 
                 tl2, alp, theta, phi, xpos, ypos, zpos);
  double fact = getTolAbs();
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Trim " << fact << " Param "
               << yh1 << ", " << bl1 << ", " << tl1 << ", " << yh2
               << ", " << bl2 << ", " << tl2;
  bl1 -= fact;
  tl1 -= fact;
  bl2 -= fact;
  tl2 -= fact;

  name = module.name().name()+"Absorber";
  solid = DDSolidFactory::trap(DDName(name, idNameSpace), 
                   0.5*getThick(mod), theta, phi, yh1,
                   bl1, tl1, alp, yh2, bl2, tl2, alp);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << solid.name() 
               << " Trap made of " << getAbsMat() << " of dimensions " 
               << 0.5*getThick(mod) << ", " << theta/CLHEP::deg << ", "
               << phi/CLHEP::deg << ", " << yh1 << ", " << bl1 << ", " 
               << tl1 << ", " << alp/CLHEP::deg << ", " << yh2 << ", "
               << bl2 << ", " << tl2 << ", " << alp/CLHEP::deg;
  glog = DDLogicalPart(solid.ddname(), matabsorbr, solid);

  DDTranslation r2(xpos, ypos, zpos);
  cpv.position(glog, module, 1, r2, rot);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
               << " number 1 positioned in " << module.name() << " at "
               << r2 << " with " << rot;
}

void DDHCalEndcapAlgo::constructInsideSector ( DDLogicalPart  sector, DDCompactView &  cpv  )

protected

!!!!!!!!!!!!!!!!Should be zero. And removed as soon as

Definition at line 519 of file DDHCalEndcapAlgo.cc.

References alpha, constructInsideModule(), constructInsideModule0(), DDSplit(), equipModule(), first, getAngBot(), getModMat(), getModName(), getModType(), getModules(), getNsectors(), getRinBlock1(), getRinBlock2(), getRinDip(), getRinKink(), getRout(), getRoutBlock1(), getRoutBlock2(), getRoutDip(), getSectionModule(), getSlope(), getZ1Beam(), getZiDip(), getZiKink(), getZmaxBlock(), getZminBlock(), getZShiftHac2(), i, idName, idNameSpace, gen::k, LogDebug, mergeVDriftHistosByStation::name, DDBase< N, C >::name(), pi, DDSolidFactory::polyhedra(), DDCompactView::position(), edm::second(), and funct::tan().

Referenced by constructGeneralVolume().

                                                                                     {
  
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: Modules (" << getModules()
               << ") ...";
  double alpha = CLHEP::pi/getNsectors();

  for (int i = 0; i < getModules(); i++) {
    string  name   = idName + getModName(i);
    DDName matname(DDSplit(getModMat(i)).first, DDSplit(getModMat(i)).second); 
    DDMaterial matter(matname);
    
    if (equipModule(i)>0) {
      int nsec = getSectionModule(i);

      //vertical walls are allowed in SolidPolyhedra
      double deltaz = 0;
    
      vector<double> pgonZ, pgonRmin, pgonRmax;
      if (nsec == 3) {
    double zf = getZminBlock(i) + getZShiftHac2();
    pgonZ.push_back(zf);
    pgonRmin.push_back(zf*tan(getAngBot())); 
    pgonRmax.push_back((zf-getZ1Beam())*getSlope());
    pgonZ.push_back(getZiKink());  
    pgonRmin.push_back(getRinKink()); 
    pgonRmax.push_back(getRout());
      } else {
    pgonZ.push_back(getZminBlock(i));
    pgonRmin.push_back(getRinBlock1(i)); 
    pgonRmax.push_back(getRoutBlock1(i));
      }
      if (nsec == 4) {
    pgonZ.push_back(getZiDip());
    pgonRmin.push_back(getRinDip());
    pgonRmax.push_back(getRout());
    pgonZ.push_back(pgonZ[1] + deltaz);
    pgonRmin.push_back(pgonRmin[1]); 
    pgonRmax.push_back(getRoutDip());
      }
      pgonZ.push_back(getZmaxBlock(i));
      pgonRmin.push_back(getRinBlock2(i)); 
      pgonRmax.push_back(getRoutBlock2(i));

      //Solid & volume
      DDSolid solid;
      solid = DDSolidFactory::polyhedra(DDName(name, idNameSpace), 
                    1, -alpha, 2*alpha,
                    pgonZ, pgonRmin, pgonRmax);
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " 
               << DDName(name,idNameSpace) << " Polyhedra made of "
               << getModMat(i) << " with 1 sector from "
               << -alpha/CLHEP::deg << " to " << alpha/CLHEP::deg 
               << " and with " << nsec << " sections";
      for (unsigned int k=0; k<pgonZ.size(); k++)
    LogDebug("HCalGeom") << "\t\tZ = " << pgonZ[k] << "\tRmin = "
                 << pgonRmin[k] << "\tRmax = " << pgonRmax[k];
    
      DDLogicalPart glog(DDName(name, idNameSpace), matter, solid);

     cpv.position(glog, sector, i+1, DDTranslation(0.0, 0.0, 0.0), DDRotation());
      LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
               << " number " << i+1 << " positioned in " 
               << sector.name() << " at (0,0,0) with no rotation";
      
      if (getModType(i) == 0) 
    constructInsideModule0 (glog, i, cpv);
      else
    constructInsideModule  (glog, i, cpv);
    }
  }
  
}

void DDHCalEndcapAlgo::constructScintLayer ( DDLogicalPart  glog, double  pDz, double  yh, double  bl, double  tl, double  alp, std::string  name, int  id, DDCompactView &  cpv  )

protected

Definition at line 881 of file DDHCalEndcapAlgo.cc.

References DDBase< N, C >::ddname(), DDSplit(), first, getScintMat(), idName, idNameSpace, LogDebug, mergeVDriftHistosByStation::name, DDBase< N, C >::name(), DDCompactView::position(), edm::second(), and DDSolidFactory::trap().

Referenced by constructInsideModule(), and constructInsideModule0().

                                                                          {

  DDName matname(DDSplit(getScintMat()).first, DDSplit(getScintMat()).second);
  DDMaterial matter(matname);
  string name = idName+"Scintillator"+nm;

  DDSolid solid = DDSolidFactory::trap(DDName(name, idNameSpace), 0.5*dz, 0, 0,
                       yh, bl, tl, alp, yh, bl, tl, alp);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << DDName(name,idNameSpace)
               << " Trap made of " << getScintMat() <<" of dimensions "
               << 0.5*dz << ", 0, 0, " << yh << ", "  << bl << ", " 
               << tl << ", " << alp/CLHEP::deg << ", " << yh << ", " 
               << bl << ", " << tl << ", " << alp/CLHEP::deg;

  DDLogicalPart glog(solid.ddname(), matter, solid); 

  cpv.position(glog, detector, id, DDTranslation(0,0,0), DDRotation());
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo test: " << glog.name() 
               << " number " << id << " positioned in " 
               << detector.name() << " at (0,0,0) with no rotation";

}

int DDHCalEndcapAlgo::equipModule ( unsigned int  i ) const

inline

Definition at line 22 of file DDHCalEndcapAlgo.h.

References eModule, and i.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return eModule[i];}

void DDHCalEndcapAlgo::execute

(

DDCompactView &

cpv

)

Definition at line 314 of file DDHCalEndcapAlgo.cc.

References constructGeneralVolume(), and LogDebug.

                                                 {
  
  LogDebug("HCalGeom") << "==>> Constructing DDHCalEndcapAlgo...";
  constructGeneralVolume(cpv);
  LogDebug("HCalGeom") << "<<== End of DDHCalEndcapAlgo construction ...";
}

std::string DDHCalEndcapAlgo::getAbsMat ( ) const

inline

Definition at line 50 of file DDHCalEndcapAlgo.h.

References absMat.

Referenced by constructGeneralVolume(), and constructInsideModule0().

{return absMat;}

double DDHCalEndcapAlgo::getAngBot ( ) const

inline

Definition at line 46 of file DDHCalEndcapAlgo.h.

References angBot.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return angBot;}

double DDHCalEndcapAlgo::getAngGap ( ) const

inline

Definition at line 47 of file DDHCalEndcapAlgo.h.

References angGap.

{return angGap;}

double DDHCalEndcapAlgo::getAngTop ( ) const

inline

Definition at line 45 of file DDHCalEndcapAlgo.h.

References angTop.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), and parameterLayer0().

{return angTop;}

double DDHCalEndcapAlgo::getDrEnd ( ) const

inline

Definition at line 44 of file DDHCalEndcapAlgo.h.

References drEnd.

Referenced by constructGeneralVolume().

{return drEnd;}

double DDHCalEndcapAlgo::getDzShift ( ) const

inline

Definition at line 36 of file DDHCalEndcapAlgo.h.

References dzShift.

Referenced by constructGeneralVolume().

{return dzShift;}

double DDHCalEndcapAlgo::getDzStep ( ) const

inline

Definition at line 35 of file DDHCalEndcapAlgo.h.

References dzStep.

Referenced by constructInsideModule(), and constructInsideModule0().

{return dzStep;}

int DDHCalEndcapAlgo::getEndcaps ( ) const

inline

Definition at line 21 of file DDHCalEndcapAlgo.h.

References nEndcap.

Referenced by constructGeneralVolume().

{return nEndcap;}

std::string DDHCalEndcapAlgo::getGenMat ( ) const

inline

Definition at line 17 of file DDHCalEndcapAlgo.h.

References genMaterial.

Referenced by constructGeneralVolume(), and constructInsideModule().

{return genMaterial;}

double DDHCalEndcapAlgo::getHeboxDepth ( ) const

inline

Definition at line 43 of file DDHCalEndcapAlgo.h.

References heboxDepth.

{return heboxDepth;}

int DDHCalEndcapAlgo::getLayer	(	unsigned int	i,
		unsigned int	j
	)		const

Definition at line 32 of file DDHCalEndcapAlgo.cc.

References j, layerN0, layerN1, layerN2, layerN3, layerN4, and layerN5.

Referenced by constructInsideModule(), and constructInsideModule0().

                                                                   {

  switch (i) {
  case 0: 
    return layerN0[j];
    break;

  case 1: 
    return layerN1[j];
    break;

  case 2: 
    return layerN2[j];
    break;

  case 3: 
    return layerN3[j];
    break;

  case 4: 
    return layerN4[j];
    break;

  case 5: 
    return layerN5[j];
    break;

  default:
    return 0;
  }
}

int DDHCalEndcapAlgo::getLayerN ( unsigned int  i ) const

inline

Definition at line 56 of file DDHCalEndcapAlgo.h.

References i, and layerN.

Referenced by constructInsideModule().

{return layerN[i];}

std::string DDHCalEndcapAlgo::getLayerName ( unsigned int  i ) const

inline

Definition at line 70 of file DDHCalEndcapAlgo.h.

References i, and layerName.

Referenced by constructInsideModule(), and constructInsideModule0().

{return layerName[i];}

int DDHCalEndcapAlgo::getLayers ( ) const

inline

Definition at line 69 of file DDHCalEndcapAlgo.h.

References layers.

{return layers;}

double DDHCalEndcapAlgo::getLayerT ( unsigned int  i ) const

inline

Definition at line 72 of file DDHCalEndcapAlgo.h.

References i, and layerT.

Referenced by constructInsideModule(), constructInsideModule0(), and parameterLayer0().

{return layerT[i];}

int DDHCalEndcapAlgo::getLayerType ( unsigned int  i ) const

inline

Definition at line 71 of file DDHCalEndcapAlgo.h.

References i, and layerType.

Referenced by constructInsideModule(), and constructInsideModule0().

{return layerType[i];}

std::string DDHCalEndcapAlgo::getModMat ( unsigned int  i ) const

inline

Definition at line 53 of file DDHCalEndcapAlgo.h.

References i, and modMat.

Referenced by constructInsideSector().

{return modMat[i];}

std::string DDHCalEndcapAlgo::getModName ( unsigned int  i ) const

inline

Definition at line 52 of file DDHCalEndcapAlgo.h.

References i, and modName.

Referenced by constructInsideModule(), constructInsideModule0(), and constructInsideSector().

{return modName[i];}

int DDHCalEndcapAlgo::getModType ( unsigned int  i ) const

inline

Definition at line 54 of file DDHCalEndcapAlgo.h.

References i, and modType.

Referenced by constructInsideSector().

{return modType[i];}

int DDHCalEndcapAlgo::getModules ( ) const

inline

Definition at line 51 of file DDHCalEndcapAlgo.h.

References modules.

Referenced by constructInsideSector().

{return modules;}

int DDHCalEndcapAlgo::getNsectors ( ) const

inline

Definition at line 19 of file DDHCalEndcapAlgo.h.

References nsectors.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideSector(), parameterLayer(), and parameterLayer0().

{return nsectors;}

int DDHCalEndcapAlgo::getNsectortot ( ) const

inline

Definition at line 20 of file DDHCalEndcapAlgo.h.

References nsectortot.

Referenced by constructGeneralVolume().

{return nsectortot;}

int DDHCalEndcapAlgo::getPhi ( ) const

inline

Definition at line 67 of file DDHCalEndcapAlgo.h.

References phiSections.

Referenced by constructInsideModule(), and constructInsideModule0().

{return phiSections;}

std::string DDHCalEndcapAlgo::getPhiName ( unsigned int  i ) const

inline

Definition at line 68 of file DDHCalEndcapAlgo.h.

References i, and phiName.

Referenced by constructInsideModule(), and constructInsideModule0().

{return phiName[i];}

std::string DDHCalEndcapAlgo::getPlastMat ( ) const

inline

Definition at line 74 of file DDHCalEndcapAlgo.h.

References plastMat.

Referenced by constructInsideModule(), and constructInsideModule0().

{return plastMat;}

double DDHCalEndcapAlgo::getRinBlock1 ( unsigned  i ) const

inline

Definition at line 62 of file DDHCalEndcapAlgo.h.

References i, and rinBlock1.

Referenced by constructInsideSector().

{return rinBlock1[i];}

double DDHCalEndcapAlgo::getRinBlock2 ( unsigned  i ) const

inline

Definition at line 63 of file DDHCalEndcapAlgo.h.

References i, and rinBlock2.

Referenced by constructInsideSector().

{return rinBlock2[i];}

double DDHCalEndcapAlgo::getRinDip ( ) const

inline

Definition at line 41 of file DDHCalEndcapAlgo.h.

References riDip.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return riDip;}

double DDHCalEndcapAlgo::getRinKink ( ) const

inline

Definition at line 40 of file DDHCalEndcapAlgo.h.

References riKink.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return riKink;}

std::string DDHCalEndcapAlgo::getRotation ( ) const

inline

Definition at line 18 of file DDHCalEndcapAlgo.h.

References rotation.

Referenced by constructGeneralVolume().

{return rotation;}

std::string DDHCalEndcapAlgo::getRotMat ( ) const

inline

Definition at line 76 of file DDHCalEndcapAlgo.h.

References rotmat.

Referenced by constructInsideModule(), and constructInsideModule0().

{return rotmat;}

double DDHCalEndcapAlgo::getRout ( ) const

inline

Definition at line 39 of file DDHCalEndcapAlgo.h.

References rout.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return rout;}

double DDHCalEndcapAlgo::getRoutBlock1 ( unsigned  i ) const

inline

Definition at line 64 of file DDHCalEndcapAlgo.h.

References i, and routBlock1.

Referenced by constructInsideSector().

{return routBlock1[i];}

double DDHCalEndcapAlgo::getRoutBlock2 ( unsigned  i ) const

inline

Definition at line 65 of file DDHCalEndcapAlgo.h.

References i, and routBlock2.

Referenced by constructInsideModule(), and constructInsideSector().

{return routBlock2[i];}

double DDHCalEndcapAlgo::getRoutDip ( ) const

inline

Definition at line 42 of file DDHCalEndcapAlgo.h.

References roDip.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return roDip;}

std::string DDHCalEndcapAlgo::getScintMat ( ) const

inline

Definition at line 75 of file DDHCalEndcapAlgo.h.

References scintMat.

Referenced by constructScintLayer().

{return scintMat;}

double DDHCalEndcapAlgo::getScintT ( unsigned int  i ) const

inline

Definition at line 73 of file DDHCalEndcapAlgo.h.

References i, and scintT.

Referenced by constructInsideModule(), and constructInsideModule0().

{return scintT[i];}

int DDHCalEndcapAlgo::getSectionModule ( unsigned  i ) const

inline

Definition at line 55 of file DDHCalEndcapAlgo.h.

References i, and sectionModule.

Referenced by constructInsideSector().

{return sectionModule[i];}

double DDHCalEndcapAlgo::getSlope ( ) const

inline

Definition at line 48 of file DDHCalEndcapAlgo.h.

References slope.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return slope;}

double DDHCalEndcapAlgo::getThick ( unsigned int  i ) const

inline

Definition at line 58 of file DDHCalEndcapAlgo.h.

References i, and thick.

Referenced by constructInsideModule(), and constructInsideModule0().

{return thick[i];}

double DDHCalEndcapAlgo::getTolAbs ( ) const

inline

Definition at line 78 of file DDHCalEndcapAlgo.h.

References tolAbs.

Referenced by constructInsideModule0().

{return tolAbs;}

double DDHCalEndcapAlgo::getTolPos ( ) const

inline

Definition at line 77 of file DDHCalEndcapAlgo.h.

References tolPos.

{return tolPos;}

double DDHCalEndcapAlgo::getTrim	(	unsigned int	i,
		unsigned int	j
	)		const

Definition at line 64 of file DDHCalEndcapAlgo.cc.

References i, j, trimLeft, and trimRight.

Referenced by constructInsideModule(), and parameterLayer0().

                                                                     {
 
 if (j == 0)
    return trimLeft[i];
  else
    return trimRight[j];
}

double DDHCalEndcapAlgo::getZ0Beam ( ) const

inline

Definition at line 32 of file DDHCalEndcapAlgo.h.

References z0Beam.

{return z0Beam;}

double DDHCalEndcapAlgo::getZ1Beam ( ) const

inline

Definition at line 33 of file DDHCalEndcapAlgo.h.

References z1Beam.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return z1Beam;}

double DDHCalEndcapAlgo::getZEnd ( ) const

inline

Definition at line 26 of file DDHCalEndcapAlgo.h.

References zEnd.

Referenced by constructGeneralVolume().

{return zEnd;}

double DDHCalEndcapAlgo::getZFront ( ) const

inline

Definition at line 25 of file DDHCalEndcapAlgo.h.

References zFront.

Referenced by constructGeneralVolume().

{return zFront;}

double DDHCalEndcapAlgo::getZiBody ( ) const

inline

Definition at line 29 of file DDHCalEndcapAlgo.h.

References ziBody.

Referenced by constructGeneralVolume().

{return ziBody;}

double DDHCalEndcapAlgo::getZiDip ( ) const

inline

Definition at line 34 of file DDHCalEndcapAlgo.h.

References ziDip.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return ziDip;}

double DDHCalEndcapAlgo::getZiKink ( ) const

inline

Definition at line 31 of file DDHCalEndcapAlgo.h.

References ziKink.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return ziKink;}

double DDHCalEndcapAlgo::getZiL0Body ( ) const

inline

Definition at line 30 of file DDHCalEndcapAlgo.h.

References ziL0Body.

Referenced by constructGeneralVolume().

{return ziL0Body;}

double DDHCalEndcapAlgo::getZiL0Nose ( ) const

inline

Definition at line 28 of file DDHCalEndcapAlgo.h.

References ziL0Nose.

{return ziL0Nose;}

double DDHCalEndcapAlgo::getZiNose ( ) const

inline

Definition at line 27 of file DDHCalEndcapAlgo.h.

References ziNose.

{return ziNose;}

double DDHCalEndcapAlgo::getZmaxBlock ( unsigned  i ) const

inline

Definition at line 61 of file DDHCalEndcapAlgo.h.

References i, and zmaxBlock.

Referenced by constructInsideSector(), and parameterLayer0().

{return zmaxBlock[i];}

double DDHCalEndcapAlgo::getZminBlock ( unsigned  i ) const

inline

Definition at line 60 of file DDHCalEndcapAlgo.h.

References i, and zminBlock.

Referenced by constructInsideModule(), constructInsideModule0(), constructInsideSector(), and parameterLayer0().

{return zminBlock[i];}

double DDHCalEndcapAlgo::getZShift ( ) const

inline

Definition at line 23 of file DDHCalEndcapAlgo.h.

References zShift.

Referenced by constructGeneralVolume().

{return zShift;}

double DDHCalEndcapAlgo::getZShiftHac2 ( ) const

inline

Definition at line 37 of file DDHCalEndcapAlgo.h.

References zShiftHac2.

Referenced by constructGeneralVolume(), and constructInsideSector().

{return zShiftHac2;}

void DDHCalEndcapAlgo::initialize	(	const DDNumericArguments &	nArgs,
		const DDVectorArguments &	vArgs,
		const DDMapArguments &	mArgs,
		const DDStringArguments &	sArgs,
		const DDStringVectorArguments &	vsArgs
	)

Definition at line 72 of file DDHCalEndcapAlgo.cc.

References absMat, angBot, angGap, angTop, dbl_to_int(), drEnd, dzShift, dzStep, eModule, create_public_lumi_plots::exp, genMaterial, heboxDepth, i, idName, idNameSpace, idOffset, j, layerN, layerN0, layerN1, layerN2, layerN3, layerN4, layerN5, layerName, layers, layerT, layerType, LogDebug, modMat, modName, modType, python.rootplot.argparse::module, modules, nEndcap, DDCurrentNamespace::ns(), nsectors, nsectortot, dbtoconf::parent, phiName, phiSections, plastMat, diffTwoXMLs::r1, riDip, riKink, rinBlock1, rinBlock2, roDip, rotation, rotHalf, rotmat, rotns, rout, routBlock1, routBlock2, scintMat, scintT, sectionModule, funct::sin(), slope, funct::tan(), thick, tolAbs, tolPos, trimLeft, trimRight, z0Beam, z1Beam, zEnd, zFront, ziBody, ziDip, ziKink, ziL0Body, ziL0Nose, ziNose, zmaxBlock, zminBlock, zShift, and zShiftHac2.

                                                          {

  int i,j;
  genMaterial   = sArgs["MaterialName"];
  rotation      = sArgs["Rotation"];
  nsectors      = int (nArgs["Sector"]);
  nsectortot    = int (nArgs["SectorTot"]);
  nEndcap       = int (nArgs["Endcap"]);
  rotHalf       = sArgs["RotHalf"];
  rotns         = sArgs["RotNameSpace"];
  zShift        = nArgs["ZShift"];

  zFront        = nArgs["ZFront"];
  zEnd          = nArgs["ZEnd"];
  ziNose        = nArgs["ZiNose"];
  ziL0Nose      = nArgs["ZiL0Nose"];
  ziBody        = nArgs["ZiBody"];
  ziL0Body      = nArgs["ZiL0Body"];
  z0Beam        = nArgs["Z0Beam"];
  ziDip         = nArgs["ZiDip"];
  dzStep        = nArgs["DzStep"];
  zShiftHac2    = nArgs["ZShiftHac2"];
  double gap    = nArgs["Gap"];
  double z1     = nArgs["Z1"];
  double r1     = nArgs["R1"];
  rout          = nArgs["Rout"];
  heboxDepth    = nArgs["HEboxDepth"];
  drEnd         = nArgs["DrEnd"];
  double etamin = nArgs["Etamin"];
  angBot        = nArgs["AngBot"];
  angGap        = nArgs["AngGap"];

  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: General material " 
               << genMaterial << "\tSectors "  << nsectors << ",  " 
               << nsectortot << "\tEndcaps " << nEndcap  
               << "\tRotation matrix for half " << rotns 
               << ":" << rotHalf << "\n\tzFront " << zFront << " zEnd "
               << zEnd << " ziNose " << ziNose << " ziL0Nose " 
               << ziL0Nose << " ziBody " << ziBody  << " ziL0Body " 
               << ziL0Body << " z0Beam " << z0Beam << " ziDip " 
               << ziDip << " dzStep " << dzStep << " Gap " << gap 
               << " z1 " << z1 << "\n\tr1 " << r1 << " rout " << rout
               << " HeboxDepth " << heboxDepth << " drEnd " << drEnd 
               << "\tetamin " << etamin << " Bottom angle " << angBot
               << " Gap angle " << angGap << " Z-Shift " << zShift
               << " " << zShiftHac2;

  //Derived quantities
  angTop   = 2.0 * atan (exp(-etamin));
  slope    = tan(angGap);
  z1Beam   = z1 - r1/slope;
  ziKink   = z1Beam + rout/slope;
  riKink   = ziKink*tan(angBot);
  riDip    = ziDip*tan(angBot);
  roDip    = rout - heboxDepth;
  dzShift  = (z1Beam - z0Beam) - gap/sin(angGap);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: angTop " 
               << angTop/CLHEP::deg  <<"\tSlope " << slope 
               << "\tDzShift " << dzShift << "\n\tz1Beam " << z1Beam 
               << "\tziKink" << ziKink << "\triKink " << riKink 
               << "\triDip " << riDip << "\n\troDip " << roDip 
               << "\tRotation " << rotation;

  //Modules
  absMat        = sArgs["AbsMat"];
  modules       = int(nArgs["Modules"]);
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Number of modules " 
               << modules << " and absorber material " << absMat;

  modName       = vsArgs["ModuleName"];
  modMat        = vsArgs["ModuleMat"];
  modType       = dbl_to_int(vArgs["ModuleType"]);
  sectionModule = dbl_to_int(vArgs["SectionModule"]);
  thick         = vArgs["ModuleThick"];
  trimLeft      = vArgs["TrimLeft"]; 
  trimRight     = vArgs["TrimRight"]; 
  eModule       = dbl_to_int(vArgs["EquipModule"]);
  layerN        = dbl_to_int(vArgs["LayerN"]);
  layerN0       = dbl_to_int(vArgs["LayerN0"]);
  layerN1       = dbl_to_int(vArgs["LayerN1"]);
  layerN2       = dbl_to_int(vArgs["LayerN2"]);
  layerN3       = dbl_to_int(vArgs["LayerN3"]);
  layerN4       = dbl_to_int(vArgs["LayerN4"]);
  layerN5       = dbl_to_int(vArgs["LayerN5"]);
  for (i = 0; i < modules; i++) {
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: " << modName[i] <<" type "
             << modType[i] << " Sections " << sectionModule[i] 
             << " thickness of absorber/air " << thick[i] 
             << " trim " << trimLeft[i] << ", " << trimRight[i] 
             << " equip module " << eModule[i] << " with "
             << layerN[i] << " layers";
    if (i == 0) {
      for (j = 0; j < layerN[i]; j++) {
    LogDebug("HCalGeom") << "\t " << layerN0[j] << "/" << layerN0[j+1];
      }
    } else if (i == 1) {
      for (j = 0; j < layerN[i]; j++) {
    LogDebug("HCalGeom") << "\t " << layerN1[j] << "/" << layerN1[j+1];
      }
    } else if (i == 2) {
      for (j = 0; j < layerN[i]; j++) {
    LogDebug("HCalGeom") << "\t " << layerN2[j];
      }
    } else if (i == 3) {
      for (j = 0; j < layerN[i]; j++) {
    LogDebug("HCalGeom") << "\t " << layerN3[j];
      }
    } else if (i == 4) {
      for (j = 0; j < layerN[i]; j++) {
    LogDebug("HCalGeom") << "\t " << layerN4[j];
      }
    } else if (i == 5) {
      for (j = 0; j < layerN[i]; j++) {
    LogDebug("HCalGeom") << "\t " << layerN5[j];
      }
    }
  }
  
  //Layers
  phiSections = int(nArgs["PhiSections"]);
  phiName     = vsArgs["PhiName"];
  layers      = int(nArgs["Layers"]);
  layerName   = vsArgs["LayerName"];
  layerType   = dbl_to_int(vArgs["LayerType"]);
  layerT      = vArgs["LayerT"];
  scintT      = vArgs["ScintT"];
  scintMat    = sArgs["ScintMat"];
  plastMat    = sArgs["PlastMat"];
  rotmat      = sArgs["RotMat"];
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Phi Sections " 
               << phiSections;
  for (i = 0; i < phiSections; i++) 
    LogDebug("HCalGeom") << "\tName[" << i << "] : " << phiName[i];
  LogDebug("HCalGeom") << "\tPlastic: " << plastMat << "\tScintillator: "
               << scintMat << "\tRotation matrix " << rotns << ":" 
               << rotmat << "\n\tNumber of layers " << layers;
  for (i = 0; i < layers; i++) {
    LogDebug("HCalGeom") << "\t" << layerName[i] << "\tType " << layerType[i]
             << "\tThickness " << layerT[i] << "\tScint.Thick " 
             << scintT[i];
  }

  // Derive bounding of the modules
  int module = 0;
  // Layer 0 (Nose)
  if (modules > 0) {
    zminBlock.push_back(ziL0Nose);
    zmaxBlock.push_back(zminBlock[module] + layerT[0] + 0.5*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angTop));
    rinBlock2.push_back(zmaxBlock[module] * tan(angTop));
    routBlock1.push_back((zminBlock[module] - z1Beam) * slope);
    routBlock2.push_back((zmaxBlock[module] - z1Beam) * slope);
    module++;
  }

  // Layer 0 (Body)
  if (modules > 1) {
    zminBlock.push_back(ziL0Body);
    zmaxBlock.push_back(zminBlock[module] + layerT[0] + 0.5*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back(zminBlock[module] * tan(angTop));
    routBlock2.push_back(zmaxBlock[module] * tan(angTop));
    module++;
  }

  // Hac1
  if (modules > 2) {
    zminBlock.push_back(ziNose);
    zmaxBlock.push_back(ziBody);
    rinBlock1.push_back(zminBlock[module] * tan(angTop));
    rinBlock2.push_back(zmaxBlock[module] * tan(angTop));
    routBlock1.push_back((zminBlock[module] - z1Beam) * slope);
    routBlock2.push_back((zmaxBlock[module] - z1Beam) * slope);
    module++;
  }

  // Hac2
  if (modules > 3) {
    zminBlock.push_back(ziBody);
    zmaxBlock.push_back(zminBlock[module] + layerN[3]*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back((zmaxBlock[module-1] - z1Beam) * slope);
    routBlock2.push_back(rout);
    module++;
  }

  // Hac3
  if (modules > 4) {
    zminBlock.push_back(zmaxBlock[module-1]);
    zmaxBlock.push_back(zminBlock[module] + layerN[4]*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back(rout);
    routBlock2.push_back(rout);
    module++;
  }

  // Hac4
  if (modules > 5) {
    zminBlock.push_back(zmaxBlock[module-1]);
    zmaxBlock.push_back(zminBlock[module] + layerN[5]*dzStep);
    rinBlock1.push_back(zminBlock[module] * tan(angBot));
    rinBlock2.push_back(zmaxBlock[module] * tan(angBot));
    routBlock1.push_back(rout);
    routBlock2.push_back(roDip);
    module++;
  }

  for (i = 0; i < module; i++)
    LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Module " << i 
             << "\tZ/Rin/Rout " << zminBlock[i] << ", " 
             << zmaxBlock[i] << "/ " << rinBlock1[i] << ", " 
             << rinBlock2[i] << "/ " << routBlock1[i] << ", " 
             << routBlock2[i];

  idName      = sArgs["MotherName"];
  idNameSpace = DDCurrentNamespace::ns();
  idOffset = int (nArgs["IdOffset"]); 
  DDName parentName = parent().name(); 
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Parent " << parentName 
               << " idName " << idName << " NameSpace " << idNameSpace
               << " Offset " << idOffset;

  tolPos      = nArgs["TolPos"];
  tolAbs      = nArgs["TolAbs"];
  LogDebug("HCalGeom") << "DDHCalEndcapAlgo debug: Tolerances - Positioning "
               << tolPos << " Absorber " << tolAbs;
}

void DDHCalEndcapAlgo::parameterLayer ( int  iphi, double  rinF, double  routF, double  rinB, double  routB, double  zi, double  zo, double &  yh1, double &  bl1, double &  tl1, double &  yh2, double &  bl2, double &  tl2, double &  alp, double &  theta, double &  phi, double &  xpos, double &  ypos, double &  zcpv  )

protected

Definition at line 641 of file DDHCalEndcapAlgo.cc.

References alpha, getNsectors(), LogDebug, pi, alignCSCRings::r, mathSSE::sqrt(), and funct::tan().

Referenced by constructInsideModule(), and constructInsideModule0().

                                    {

  //Given rin, rout compute parameters of the trapezoid and 
  //position of the trapezoid for a standrd layer
  double alpha = CLHEP::pi/getNsectors();
  LogDebug("HCalGeom") << "Input " << iphi << " Front " << rinF << " " << routF
               << " " << zi << " Back " << rinB << " " << routB << " "
               << zo << " Alpha " << alpha/CLHEP::deg;

  yh1 = 0.5 * (routF - rinB);
  bl1 = 0.5 * rinB  * tan(alpha);
  tl1 = 0.5 * routF * tan(alpha);
  yh2 = 0.5 * (routF - rinB);
  bl2 = 0.5 * rinB  * tan(alpha);
  tl2 = 0.5 * routF * tan(alpha);
  double dx  = 0.25* (bl2+tl2-bl1-tl1);
  double dy  = 0.5 * (rinB+routF-rinB-routF);
  xpos = 0.25*(rinB+routF+rinB+routF);
  ypos = 0.25*(bl2+tl2+bl1+tl1);
  zpos = 0.5*(zi+zo);
  alp  = atan(0.5 * tan(alpha));
  //  ypos-= getTolPos();
  if (iphi == 0) {
    ypos  = -ypos;
  } else {
    alp  = -alp;
    dx   = -dx;
  }
  double r   = sqrt (dx*dx + dy*dy);
  theta= atan (r/(zo-zi));
  phi  = atan2 (dy, dx);
  LogDebug("HCalGeom") << "Output Dimensions " << yh1 << " " << bl1 << " "
               << tl1 << " " << yh2 << " " << bl2 << " " << tl2
               << " " << alp/CLHEP::deg << " " << theta/CLHEP::deg
               << " " << phi/CLHEP::deg << " Position " << xpos << " "
               << ypos << " " << zpos;
}

void DDHCalEndcapAlgo::parameterLayer0 ( int  mod, int  layer, int  iphi, double &  yh, double &  bl, double &  tl, double &  alp, double &  xpos, double &  ypos, double &  zcpv  )

protected

Definition at line 593 of file DDHCalEndcapAlgo.cc.

References alpha, getAngBot(), getAngTop(), getLayerT(), getNsectors(), getSlope(), getTrim(), getZ1Beam(), getZmaxBlock(), getZminBlock(), LogDebug, pi, rout, and funct::tan().

Referenced by constructInsideModule0().

                                                     {

  //Given module and layer number compute parameters of trapezoid
  //and positioning parameters
  double alpha = CLHEP::pi/getNsectors();
  LogDebug("HCalGeom") << "Input " << iphi << " " << layer << " " << iphi
               << " Alpha " << alpha/CLHEP::deg;

  double zi, zo;
  if (iphi == 0) {
    zi = getZminBlock(mod);
    zo = zi + getLayerT(layer);
  } else {
    zo = getZmaxBlock(mod);
    zi = zo - getLayerT(layer);
  }
  double rin, rout;
  if (mod == 0) {
    rin  = zo * tan(getAngTop());
    rout = (zi - getZ1Beam()) * getSlope();
  } else {
    rin  = zo * tan(getAngBot());
    rout = zi * tan(getAngTop());
  }
  yh   = 0.5 * (rout - rin);
  bl   = 0.5 * rin * tan (alpha);
  tl   = 0.5 * rout * tan(alpha);
  xpos = 0.5 * (rin + rout);
  ypos = 0.5 * (bl + tl);
  zpos = 0.5 * (zi + zo);
  yh  -= getTrim(mod,iphi);
  bl  -= getTrim(mod,iphi);
  tl  -= getTrim(mod,iphi);
  alp  = atan(0.5 * tan(alpha));
  if (iphi == 0) {
    ypos  = -ypos;
  } else {
    alp  = -alp;
  }
  LogDebug("HCalGeom") << "Output Dimensions " << yh << " " << bl << " "
               << tl << " " << alp/CLHEP::deg << " Position " << xpos 
               << " " << ypos << " " << zpos;
}

Member Data Documentation

std::string DDHCalEndcapAlgo::absMat

private

Definition at line 144 of file DDHCalEndcapAlgo.h.

Referenced by getAbsMat(), and initialize().

double DDHCalEndcapAlgo::angBot

private

Definition at line 140 of file DDHCalEndcapAlgo.h.

Referenced by getAngBot(), and initialize().

double DDHCalEndcapAlgo::angGap

private

Definition at line 141 of file DDHCalEndcapAlgo.h.

Referenced by getAngGap(), and initialize().

double DDHCalEndcapAlgo::angTop

private

Definition at line 139 of file DDHCalEndcapAlgo.h.

Referenced by getAngTop(), and initialize().

double DDHCalEndcapAlgo::drEnd

private

Definition at line 137 of file DDHCalEndcapAlgo.h.

Referenced by getDrEnd(), and initialize().

double DDHCalEndcapAlgo::dzShift

private

Definition at line 129 of file DDHCalEndcapAlgo.h.

Referenced by getDzShift(), and initialize().

double DDHCalEndcapAlgo::dzStep

private

Definition at line 128 of file DDHCalEndcapAlgo.h.

Referenced by getDzStep(), and initialize().

std::vector<int> DDHCalEndcapAlgo::eModule

private

Definition at line 112 of file DDHCalEndcapAlgo.h.

Referenced by equipModule(), and initialize().

std::string DDHCalEndcapAlgo::genMaterial

private

Definition at line 108 of file DDHCalEndcapAlgo.h.

Referenced by getGenMat(), and initialize().

double DDHCalEndcapAlgo::heboxDepth

private

Definition at line 136 of file DDHCalEndcapAlgo.h.

Referenced by getHeboxDepth(), and initialize().

std::string DDHCalEndcapAlgo::idName

private

Definition at line 178 of file DDHCalEndcapAlgo.h.

Referenced by constructGeneralVolume(), constructInsideSector(), constructScintLayer(), and initialize().

std::string DDHCalEndcapAlgo::idNameSpace

private

Definition at line 179 of file DDHCalEndcapAlgo.h.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), constructInsideSector(), constructScintLayer(), and initialize().

int DDHCalEndcapAlgo::idOffset

private

Definition at line 180 of file DDHCalEndcapAlgo.h.

Referenced by constructInsideModule(), constructInsideModule0(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN

private

Definition at line 150 of file DDHCalEndcapAlgo.h.

Referenced by getLayerN(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN0

private

Definition at line 151 of file DDHCalEndcapAlgo.h.

Referenced by getLayer(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN1

private

Definition at line 152 of file DDHCalEndcapAlgo.h.

Referenced by getLayer(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN2

private

Definition at line 153 of file DDHCalEndcapAlgo.h.

Referenced by getLayer(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN3

private

Definition at line 154 of file DDHCalEndcapAlgo.h.

Referenced by getLayer(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN4

private

Definition at line 155 of file DDHCalEndcapAlgo.h.

Referenced by getLayer(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerN5

private

Definition at line 156 of file DDHCalEndcapAlgo.h.

Referenced by getLayer(), and initialize().

std::vector<std::string> DDHCalEndcapAlgo::layerName

private

Definition at line 170 of file DDHCalEndcapAlgo.h.

Referenced by getLayerName(), and initialize().

int DDHCalEndcapAlgo::layers

private

Definition at line 169 of file DDHCalEndcapAlgo.h.

Referenced by getLayers(), and initialize().

std::vector<double> DDHCalEndcapAlgo::layerT

private

Definition at line 172 of file DDHCalEndcapAlgo.h.

Referenced by getLayerT(), and initialize().

std::vector<int> DDHCalEndcapAlgo::layerType

private

Definition at line 171 of file DDHCalEndcapAlgo.h.

Referenced by getLayerType(), and initialize().

std::vector<std::string> DDHCalEndcapAlgo::modMat

private

Definition at line 147 of file DDHCalEndcapAlgo.h.

Referenced by getModMat(), and initialize().

std::vector<std::string> DDHCalEndcapAlgo::modName

private

Definition at line 146 of file DDHCalEndcapAlgo.h.

Referenced by getModName(), and initialize().

std::vector<int> DDHCalEndcapAlgo::modType

private

Definition at line 148 of file DDHCalEndcapAlgo.h.

Referenced by getModType(), and initialize().

int DDHCalEndcapAlgo::modules

private

Definition at line 145 of file DDHCalEndcapAlgo.h.

Referenced by getModules(), and initialize().

int DDHCalEndcapAlgo::nEndcap

private

Definition at line 111 of file DDHCalEndcapAlgo.h.

Referenced by getEndcaps(), and initialize().

int DDHCalEndcapAlgo::nsectors

private

Definition at line 109 of file DDHCalEndcapAlgo.h.

Referenced by getNsectors(), and initialize().

int DDHCalEndcapAlgo::nsectortot

private

Definition at line 110 of file DDHCalEndcapAlgo.h.

Referenced by getNsectortot(), and initialize().

std::vector<std::string> DDHCalEndcapAlgo::phiName

private

Definition at line 168 of file DDHCalEndcapAlgo.h.

Referenced by getPhiName(), and initialize().

int DDHCalEndcapAlgo::phiSections

private

Definition at line 167 of file DDHCalEndcapAlgo.h.

Referenced by getPhi(), and initialize().

std::string DDHCalEndcapAlgo::plastMat

private

Definition at line 174 of file DDHCalEndcapAlgo.h.

Referenced by getPlastMat(), and initialize().

double DDHCalEndcapAlgo::riDip

private

Definition at line 134 of file DDHCalEndcapAlgo.h.

Referenced by getRinDip(), and initialize().

double DDHCalEndcapAlgo::riKink

private

Definition at line 133 of file DDHCalEndcapAlgo.h.

Referenced by getRinKink(), and initialize().

std::vector<double> DDHCalEndcapAlgo::rinBlock1

private

Definition at line 162 of file DDHCalEndcapAlgo.h.

Referenced by getRinBlock1(), and initialize().

std::vector<double> DDHCalEndcapAlgo::rinBlock2

private

Definition at line 164 of file DDHCalEndcapAlgo.h.

Referenced by getRinBlock2(), and initialize().

double DDHCalEndcapAlgo::roDip

private

Definition at line 135 of file DDHCalEndcapAlgo.h.

Referenced by getRoutDip(), and initialize().

std::string DDHCalEndcapAlgo::rotation

private

Definition at line 115 of file DDHCalEndcapAlgo.h.

Referenced by constructGeneralVolume(), getRotation(), and initialize().

std::string DDHCalEndcapAlgo::rotHalf

private

Definition at line 113 of file DDHCalEndcapAlgo.h.

Referenced by constructGeneralVolume(), and initialize().

std::string DDHCalEndcapAlgo::rotmat

private

Definition at line 176 of file DDHCalEndcapAlgo.h.

Referenced by getRotMat(), and initialize().

std::string DDHCalEndcapAlgo::rotns

private

Definition at line 114 of file DDHCalEndcapAlgo.h.

Referenced by constructGeneralVolume(), constructInsideModule(), constructInsideModule0(), and initialize().

double DDHCalEndcapAlgo::rout

private

Definition at line 132 of file DDHCalEndcapAlgo.h.

Referenced by getRout(), initialize(), and parameterLayer0().

std::vector<double> DDHCalEndcapAlgo::routBlock1

private

Definition at line 163 of file DDHCalEndcapAlgo.h.

Referenced by getRoutBlock1(), and initialize().

std::vector<double> DDHCalEndcapAlgo::routBlock2

private

Definition at line 165 of file DDHCalEndcapAlgo.h.

Referenced by getRoutBlock2(), and initialize().

std::string DDHCalEndcapAlgo::scintMat

private

Definition at line 175 of file DDHCalEndcapAlgo.h.

Referenced by getScintMat(), and initialize().

std::vector<double> DDHCalEndcapAlgo::scintT

private

Definition at line 173 of file DDHCalEndcapAlgo.h.

Referenced by getScintT(), and initialize().

std::vector<int> DDHCalEndcapAlgo::sectionModule

private

Definition at line 149 of file DDHCalEndcapAlgo.h.

Referenced by getSectionModule(), and initialize().

double DDHCalEndcapAlgo::slope

private

Definition at line 142 of file DDHCalEndcapAlgo.h.

Referenced by Vispa.Views.LineDecayView.DecayLine::containsPoint(), getSlope(), initialize(), and Vispa.Views.LineDecayView.DecayLine::transform().

std::vector<double> DDHCalEndcapAlgo::thick

private

Definition at line 157 of file DDHCalEndcapAlgo.h.

Referenced by getThick(), and initialize().

double DDHCalEndcapAlgo::tolAbs

private

Definition at line 182 of file DDHCalEndcapAlgo.h.

Referenced by getTolAbs(), and initialize().

double DDHCalEndcapAlgo::tolPos

private

Definition at line 182 of file DDHCalEndcapAlgo.h.

Referenced by getTolPos(), and initialize().

std::vector<double> DDHCalEndcapAlgo::trimLeft

private

Definition at line 158 of file DDHCalEndcapAlgo.h.

Referenced by getTrim(), and initialize().

std::vector<double> DDHCalEndcapAlgo::trimRight

private

Definition at line 159 of file DDHCalEndcapAlgo.h.

Referenced by getTrim(), and initialize().

double DDHCalEndcapAlgo::z0Beam

private

Definition at line 125 of file DDHCalEndcapAlgo.h.

Referenced by getZ0Beam(), and initialize().

double DDHCalEndcapAlgo::z1Beam

private

Definition at line 126 of file DDHCalEndcapAlgo.h.

Referenced by getZ1Beam(), and initialize().

double DDHCalEndcapAlgo::zEnd

private

Definition at line 119 of file DDHCalEndcapAlgo.h.

Referenced by getZEnd(), and initialize().

double DDHCalEndcapAlgo::zFront

private

Definition at line 118 of file DDHCalEndcapAlgo.h.

Referenced by getZFront(), and initialize().

double DDHCalEndcapAlgo::ziBody

private

Definition at line 122 of file DDHCalEndcapAlgo.h.

Referenced by getZiBody(), and initialize().

double DDHCalEndcapAlgo::ziDip

private

Definition at line 127 of file DDHCalEndcapAlgo.h.

Referenced by getZiDip(), and initialize().

double DDHCalEndcapAlgo::ziKink

private

Definition at line 124 of file DDHCalEndcapAlgo.h.

Referenced by getZiKink(), and initialize().

double DDHCalEndcapAlgo::ziL0Body

private

Definition at line 123 of file DDHCalEndcapAlgo.h.

Referenced by getZiL0Body(), and initialize().

double DDHCalEndcapAlgo::ziL0Nose

private

Definition at line 121 of file DDHCalEndcapAlgo.h.

Referenced by getZiL0Nose(), and initialize().

double DDHCalEndcapAlgo::ziNose

private

Definition at line 120 of file DDHCalEndcapAlgo.h.

Referenced by getZiNose(), and initialize().

std::vector<double> DDHCalEndcapAlgo::zmaxBlock

private

Definition at line 161 of file DDHCalEndcapAlgo.h.

Referenced by getZmaxBlock(), and initialize().

std::vector<double> DDHCalEndcapAlgo::zminBlock

private

Definition at line 160 of file DDHCalEndcapAlgo.h.

Referenced by getZminBlock(), and initialize().

double DDHCalEndcapAlgo::zShift

private

Definition at line 116 of file DDHCalEndcapAlgo.h.

Referenced by getZShift(), and initialize().

double DDHCalEndcapAlgo::zShiftHac2

private

Definition at line 130 of file DDHCalEndcapAlgo.h.

Referenced by getZShiftHac2(), and initialize().