LASGlobalData< T > Class Template Reference

#include <LASGlobalData.h>

Inheritance diagram for LASGlobalData< T >:

Public Types
enum	Beam {   BEAM0, BEAM1, BEAM2, BEAM3,   BEAM4, BEAM5, BEAM6, BEAM7 }
enum	Subdetector { TECPLUS, TECMINUS, TIB, TOB }
enum	TecDisk {   DISK1, DISK2, DISK3, DISK4,   DISK5, DISK6, DISK7, DISK8,   DISK9 }
enum	TecRing { RING4, RING6 }
enum	TibTobPosition {   MINUS3, MINUS2, MINUS1, PLUS1,   PLUS2, PLUS3 }

Public Member Functions
T &	GetTEC2TECEntry (int subdetector, int beam, int tecDisk)
T &	GetTECEntry (int subdetector, int tecRing, int beam, int tecDisk)
T &	GetTIBTOBEntry (int subdetector, int beam, int tibTobPosition)
	LASGlobalData ()
	LASGlobalData (const T &)
void	SetTEC2TECEntry (int subdetector, int beam, int tecDisk, T)
void	SetTECEntry (int subdetector, int tecRing, int beam, int tecDisk, T)
void	SetTIBTOBEntry (int subdetector, int beam, int tibTobPosition, T)

Private Member Functions
	ClassDef (LASGlobalData, 2)
void	Init (const T &in=T())

Private Attributes
std::vector< std::vector< T > >	tecMinusATData
std::vector< std::vector < std::vector< T > > >	tecMinusData
std::vector< std::vector< T > >	tecPlusATData
std::vector< std::vector < std::vector< T > > >	tecPlusData
std::vector< std::vector< T > >	tibData
std::vector< std::vector< T > >	tobData

Detailed Description

template<class T>
class LASGlobalData< T >

Container class for storing and easy access to global LAS data

There is one entry of type T for each LAS module, e.g. beam profiles, position, name, ... All identifiers (beam,subdetector,position,...) start with index 0. Note that some ring 4 TEC modules are hit by either TEC internal as well as by AT beams and are therefore considered twice in the container (once in tec<X>Data and once in tec<X>ATData). Do not instantiate this class with bool.

Short LAS geometry reminder:

• TEC internal alignment:
  8 beams each hit ring 6 modules on 9 disks per endcap
  8 beams each hit ring 4 modules on 9 disks per endcap
  
• Barrel AT alignment:
  8 AT beams each hit 6 TIb and 6 TOB modules
  
• TEC AT (TEC2TEC inter-) alignment:
  8 barrel (AT) beams each hit 5 ring 4 modules per endcap
  

Definition at line 31 of file LASGlobalData.h.

Member Enumeration Documentation

template<class T>

enum LASGlobalData::Beam

Enumerator
BEAM0
BEAM1
BEAM2
BEAM3
BEAM4
BEAM5
BEAM6
BEAM7

Definition at line 38 of file LASGlobalData.h.

{ BEAM0, BEAM1, BEAM2, BEAM3, BEAM4, BEAM5, BEAM6, BEAM7 };

template<class T>

enum LASGlobalData::Subdetector

Enumerator
TECPLUS
TECMINUS
TIB
TOB

Definition at line 36 of file LASGlobalData.h.

{ TECPLUS, TECMINUS, TIB, TOB };

template<class T>

enum LASGlobalData::TecDisk

Enumerator
DISK1
DISK2
DISK3
DISK4
DISK5
DISK6
DISK7
DISK8
DISK9

Definition at line 39 of file LASGlobalData.h.

{ DISK1, DISK2, DISK3, DISK4, DISK5, DISK6, DISK7, DISK8, DISK9 };

template<class T>

enum LASGlobalData::TecRing

Enumerator
RING4
RING6

Definition at line 37 of file LASGlobalData.h.

{ RING4, RING6 };

template<class T>

enum LASGlobalData::TibTobPosition

Enumerator
MINUS3
MINUS2
MINUS1
PLUS1
PLUS2
PLUS3

Definition at line 40 of file LASGlobalData.h.

{ MINUS3, MINUS2, MINUS1, PLUS1, PLUS2, PLUS3 };

Constructor & Destructor Documentation

template<class T >

LASGlobalData< T >::LASGlobalData

(

)

def constructor

Definition at line 69 of file LASGlobalData.h.

                                {

  Init();

}

template<class T>

LASGlobalData< T >::LASGlobalData

(

const T &

in

)

Definition at line 79 of file LASGlobalData.h.

{
  Init(in);
}

Member Function Documentation

template<class T>

LASGlobalData< T >::ClassDef ( LASGlobalData< T >  , 2    )

private

template<class T >

T & LASGlobalData< T >::GetTEC2TECEntry	(	int	theDetector,
		int	theBeam,
		int	theDisk
	)

get a tec AT entry (ring 4) from the container according to subdetector, beam and disk number

Definition at line 142 of file LASGlobalData.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by LaserAlignment::ApplyATMaskingCorrections(), LaserAlignment::beginJob(), LASAlignmentTubeAlgorithm::CalculateParameters(), RawDataConverter::ClearData(), LaserAlignment::DumpPosFileSet(), LASGeometryUpdater::EndcapUpdate(), LaserAlignment::endRunProduce(), fcn(), LaserAlignment::fillDataProfiles(), LaserAlignmentT0ProducerDQM::FillFromProcessedDigis(), LaserAlignmentT0ProducerDQM::FillFromRawDigis(), LaserAlignment::fillPedestalProfiles(), RawDataConverter::GetDigis(), LASAlignmentTubeAlgorithm::GetTEC2TECAlignmentParameterCorrection(), LaserAlignment::produce(), LASAlignmentTubeAlgorithm::ReadMisalignmentFromFile(), LASBarrelAlgorithm::ReadMisalignmentFromFile(), and LaserAlignment::testRoutine().

                                                                                {

  // do a range check first
  if( !( ( theDetector == 0 || theDetector == 1 ) &&        // TEC+ or TEC-
     ( theBeam >= 0 && theBeam < 8 )          &&        // eight AT beams in a TEC
     ( theDisk >= 0 && theDisk < 6 )     ) ) {          // disk1...disk5 are hit by AT
    std::cerr << " [LASGlobalData::GetTEC2TECEntry] ** ERROR: illegal coordinates:" << std::endl;
    std::cerr << "   detector " << theDetector << ", beam " << theBeam << ", disk " << theDisk << "." << std::endl;
    throw   "   Bailing out."; // @@@ REPLACE THIS BY cms::Exception (<FWCore/Utilities/interface/Exception.h> in 1_3_6)
  }
  else {
    if( theDetector == 0 ) return( tecPlusATData.at( theBeam ).at( theDisk ) );
    else return( tecMinusATData.at( theBeam ).at( theDisk ) );
  }

}

template<class T >

T & LASGlobalData< T >::GetTECEntry	(	int	theDetector,
		int	theRing,
		int	theBeam,
		int	theDisk
	)

get a tec entry from the container according to subdetector, ring, beam and disk number

Definition at line 91 of file LASGlobalData.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by LASGeometryUpdater::ApplyBeamKinkCorrections(), LaserAlignment::ApplyEndcapMaskingCorrections(), LaserAlignment::beginJob(), LASEndcapAlgorithm::CalculateParameters(), RawDataConverter::ClearData(), LaserAlignment::DumpHitmaps(), LaserAlignment::DumpPosFileSet(), LaserAlignment::endRunProduce(), LaserAlignment::fillDataProfiles(), LaserAlignmentT0ProducerDQM::FillFromProcessedDigis(), LaserAlignmentT0ProducerDQM::FillFromRawDigis(), LaserAlignment::fillPedestalProfiles(), LASEndcapAlgorithm::GetAlignmentParameterCorrection(), RawDataConverter::GetDigis(), LaserAlignment::isTECBeam(), LaserAlignment::produce(), LASAlignmentTubeAlgorithm::ReadMisalignmentFromFile(), LASBarrelAlgorithm::ReadMisalignmentFromFile(), and LaserAlignment::testRoutine().

                                                                                         {
  
  // do a range check first
  if( !( ( theDetector == 0 || theDetector == 1 ) &&        // TEC+ or TEC-
     ( theRing == 0 || theRing == 1 )         &&        // ring4 or ring6
     ( theBeam >= 0 && theBeam < 8 )          &&        // eight beams in a TEC
     ( theDisk >= 0 && theDisk < 9 )             ) ) {  // disk1..disk9
    std::cerr << " [LASGlobalData::GetTECEntry] ** ERROR: illegal input coordinates:" << std::endl;
    std::cerr << "   detector " << theDetector << ", ring " << theRing << ", beam " << theBeam << ", disk " << theDisk << "." << std::endl;
    throw   "   Bailing out."; // @@@ REPLACE THIS BY cms::Exception (<FWCore/Utilities/interface/Exception.h> in 1_3_6)
  }
  else {
    if( theDetector == 0 ) return( tecPlusData.at( theRing ).at( theBeam ).at( theDisk ) );
    else return( tecMinusData.at( theRing ).at( theBeam ).at( theDisk ) );
  }

}

template<class T >

T & LASGlobalData< T >::GetTIBTOBEntry	(	int	theDetector,
		int	theBeam,
		int	thePosition
	)

get a tib/tob entry from the container according to subdetector, beam and position (z) number

Definition at line 117 of file LASGlobalData.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by LaserAlignment::ApplyATMaskingCorrections(), LaserAlignment::beginJob(), LASAlignmentTubeAlgorithm::CalculateParameters(), RawDataConverter::ClearData(), LaserAlignment::DumpPosFileSet(), LaserAlignment::endRunProduce(), fcn(), LaserAlignment::fillDataProfiles(), LaserAlignmentT0ProducerDQM::FillFromProcessedDigis(), LaserAlignmentT0ProducerDQM::FillFromRawDigis(), LaserAlignment::fillPedestalProfiles(), RawDataConverter::GetDigis(), LASAlignmentTubeAlgorithm::GetTIBTOBAlignmentParameterCorrection(), LaserAlignment::isATBeam(), LaserAlignment::produce(), LASAlignmentTubeAlgorithm::ReadMisalignmentFromFile(), LASBarrelAlgorithm::ReadMisalignmentFromFile(), and LaserAlignment::testRoutine().

                                                                                   {

  // do a range check first
  if( !( ( theDetector == 2 || theDetector == 3 ) &&        // TIB or TOB
     ( theBeam >= 0 && theBeam < 8 )          &&        // there are eight AT beams
     ( thePosition >= 0 && thePosition < 6 )     ) ) {  // z-pos -3 .. z-pos +3
    std::cerr << " [LASGlobalData::GetTIBTOBEntry] ** ERROR: illegal coordinates:" << std::endl;
    std::cerr << "   detector " << theDetector << ", beam " << theBeam << ", position " << thePosition << "." << std::endl;
    throw   "   Bailing out."; // @@@ REPLACE THIS BY cms::Exception (<FWCore/Utilities/interface/Exception.h> in 1_3_6)
  }
  else {
    if( theDetector == 2 ) return( tibData.at( theBeam ).at( thePosition ) );
    else return( tobData.at( theBeam ).at( thePosition ) );
  }

}

template<class T>

void LASGlobalData< T >::Init ( const T &  in = T() )

private

Definition at line 282 of file LASGlobalData.h.

References relativeConstraints::ring.

                                         {

  // create TEC+ subdetector "multi"-vector of T
  tecPlusData.resize( 2 ); // create ring4 and ring6
  for( unsigned int ring = 0; ring < tecPlusData.size(); ++ring ) {
    tecPlusData.at( ring ).resize( 8 ); // create 8 beams for each ring
    for( unsigned int beam = 0; beam < tecPlusData.at( ring ).size(); ++beam ) {
      tecPlusData.at( ring ).at( beam ).resize( 9 , in); // create 9 disks for each beam
    }
  }

  // same for TEC-
  tecMinusData.resize( 2 ); // create ring4 and ring6
  for( unsigned int ring = 0; ring < tecMinusData.size(); ++ring ) {
    tecMinusData.at( ring ).resize( 8 ); // create 8 beams for each ring
    for( unsigned int beam = 0; beam < tecMinusData.at( ring ).size(); ++beam ) {
      tecMinusData.at( ring ).at( beam ).resize( 9, in ); // create 9 disks for each beam
    }
  }
  
  // same for TEC+ AT
  tecPlusATData.resize( 8 ); // create 8 beams
  for( unsigned int beam = 0; beam < tecPlusATData.size(); ++beam ) {
    tecPlusATData.at( beam ).resize( 5, in ); // five TEC disks hit by each AT beam
  }

  // same for TEC- AT
  tecMinusATData.resize( 8 ); // create 8 beams
  for( unsigned int beam = 0; beam < tecMinusATData.size(); ++beam ) {
    tecMinusATData.at( beam ).resize( 5, in ); // five TEC disks hit by each AT beam
  }

  // same for TIB..
  tibData.resize( 8 ); // create 8 beams
  for( unsigned int beam = 0; beam < tibData.size(); ++ beam ) {
    tibData.at( beam ).resize( 6, in ); // six TIB modules hit by each beam
  }

  // ..and for TOB
  tobData.resize( 8 ); // create 8 beams
  for( unsigned int beam = 0; beam < tobData.size(); ++ beam ) {
    tobData.at( beam ).resize( 6, in ); // six TOB modules hit by each beam
  }
}

template<class T>

void LASGlobalData< T >::SetTEC2TECEntry	(	int	theDetector,
		int	theBeam,
		int	theDisk,
		T	theEntry
	)

set a tec AT entry (ring 4) in the container according to subdetector, beam and disk number

Definition at line 221 of file LASGlobalData.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by LaserAlignment::beginJob(), LaserAlignment::CalculateNominalCoordinates(), LaserAlignment::endRunProduce(), RawDataConverter::fillDetectorId(), LaserAlignmentT0ProducerDQM::FillDetectorId(), and LaserAlignment::fillDetectorId().

                                                                                              {

  // do a range check first
  if( !( ( theDetector == 0 || theDetector == 1 ) &&        // TEC+ or TEC-
     ( theBeam >= 0 && theBeam < 8 )          &&        // eight beams in a TEC
     ( theDisk >= 0 && theDisk < 6 )             ) ) {  // disk1..disk5 for TEC AT
    std::cerr << " [LASGlobalData::SetTEC2TECEntry] ** ERROR: illegal coordinates:" << std::endl;
    std::cerr << "   detector " << theDetector << ", beam " << theBeam << ", disk " << theDisk << "." << std::endl;
    throw   "   Bailing out."; // @@@ REPLACE THIS BY cms::Exception (<FWCore/Utilities/interface/Exception.h> in 1_3_6)
  }
  else {
    if( theDetector == 0 ) tecPlusATData.at( theBeam ).at( theDisk ) = theEntry;
    else tecMinusATData.at( theBeam ).at( theDisk ) = theEntry;
  }

}

template<class T>

void LASGlobalData< T >::SetTECEntry	(	int	theDetector,
		int	theRing,
		int	theBeam,
		int	theDisk,
		T	theEntry
	)

set a tec entry int the container according to subdetector, ring, beam and disk number

Definition at line 168 of file LASGlobalData.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by LaserAlignment::beginJob(), LaserAlignment::CalculateNominalCoordinates(), LaserAlignment::endRunProduce(), RawDataConverter::fillDetectorId(), LaserAlignmentT0ProducerDQM::FillDetectorId(), LaserAlignment::fillDetectorId(), and LaserAlignment::produce().

                                                                                                       {
  
  // do a range check first
  if( !( ( theDetector == 0 || theDetector == 1 ) &&        // TEC+ or TEC-
     ( theRing == 0 || theRing == 1 )         &&        // ring4 or ring6
     ( theBeam >= 0 && theBeam < 8 )          &&        // eight beams in a TEC
     ( theDisk >= 0 && theDisk < 9 )             ) ) {  // disk1..disk9
    std::cerr << " [LASGlobalData::SetTECEntry] ** ERROR: illegal coordinates:" << std::endl;
    std::cerr << "   detector " << theDetector << ", ring " << theRing << ", beam " << theBeam << ", disk " << theDisk << "." << std::endl;
    throw   "   Bailing out."; // @@@ REPLACE THIS BY cms::Exception (<FWCore/Utilities/interface/Exception.h> in 1_3_6)
  }
  else {
    if( theDetector == 0 ) tecPlusData.at( theRing ).at( theBeam ).at( theDisk ) = theEntry;
    else tecMinusData.at( theRing ).at( theBeam ).at( theDisk ) = theEntry;
  }

}

template<class T>

void LASGlobalData< T >::SetTIBTOBEntry	(	int	theDetector,
		int	theBeam,
		int	thePosition,
		T	theEntry
	)

set a tib/tob entry in the container accord subdetector, beam and position (z) number

Definition at line 195 of file LASGlobalData.h.

References dtNoiseDBValidation_cfg::cerr.

Referenced by LaserAlignment::beginJob(), LaserAlignment::CalculateNominalCoordinates(), LaserAlignment::endRunProduce(), RawDataConverter::fillDetectorId(), LaserAlignmentT0ProducerDQM::FillDetectorId(), LaserAlignment::fillDetectorId(), and LaserAlignment::produce().

                                                                                                 {

  // do a range check first
  if( !( ( theDetector == 2 || theDetector == 3 ) &&        // TIB or TOB
     ( theBeam >= 0 && theBeam < 8 )          &&        // there are eight AT beams
     ( thePosition >= 0 && thePosition < 6 )     ) ) {  // pos-3..pos+3
    std::cerr << " [LASGlobalData::SetTIBTOBEntry] ** ERROR: illegal coordinates:" << std::endl;
    std::cerr << "   detector " << theDetector << ", beam " << theBeam << ", position " << thePosition << "." << std::endl;
    throw   "   Bailing out."; // @@@ REPLACE THIS BY cms::Exception (<FWCore/Utilities/interface/Exception.h> in 1_3_6)
  }
  else {
    if( theDetector == 2 ) tibData.at( theBeam ).at( thePosition ) = theEntry;
    else tobData.at( theBeam ).at( thePosition ) = theEntry;
  }

}

Member Data Documentation

template<class T>

std::vector<std::vector<T> > LASGlobalData< T >::tecMinusATData

private

Definition at line 57 of file LASGlobalData.h.

template<class T>

std::vector<std::vector<std::vector<T> > > LASGlobalData< T >::tecMinusData

private

Definition at line 55 of file LASGlobalData.h.

template<class T>

std::vector<std::vector<T> > LASGlobalData< T >::tecPlusATData

private

Definition at line 56 of file LASGlobalData.h.

template<class T>

std::vector<std::vector<std::vector<T> > > LASGlobalData< T >::tecPlusData

private

Definition at line 54 of file LASGlobalData.h.

template<class T>

std::vector<std::vector<T> > LASGlobalData< T >::tibData

private

Definition at line 58 of file LASGlobalData.h.

template<class T>

std::vector<std::vector<T> > LASGlobalData< T >::tobData

private

Definition at line 59 of file LASGlobalData.h.