#include <TopSingleLeptonDQM.h>

Public Types
enum	Level { STANDARD, VERBOSE, DEBUG }
	different verbosity levels More...

Public Member Functions
void	book (std::string directory)
	book histograms in subdirectory directory More...

void	fill (const edm::Event &event, const edm::EventSetup &setup)
	fill monitor histograms with electronId and jetCorrections More...

	MonitorEnsemble (const char *label, const edm::ParameterSet &cfg, edm::ConsumesCollector &&iC)
	default contructor More...

	~MonitorEnsemble ()
	default destructor More...

Private Member Functions
bool	booked (const std::string histName) const
	check if histogram was booked More...

void	fill (const edm::Event &event, const edm::TriggerResults &triggerTable, std::string channel, const std::vector< std::string > labels) const
	fill trigger monitoring histograms More...

void	fill (const std::string histName, double value) const
	fill histogram if it had been booked before More...

void	fill (const std::string histName, double xValue, double yValue) const
	fill histogram if it had been booked before (2-dim version) More...

void	fill (const std::string histName, double xValue, double yValue, double zValue) const
	fill histogram if it had been booked before (2-dim version) More...

std::string	monitorPath (const std::string &label) const

std::string	selectionPath (const std::string &label) const

void	triggerBinLabels (std::string channel, const std::vector< std::string > labels)
	set configurable labels for trigger monitoring histograms More...

Private Attributes
edm::EDGetTokenT < reco::JetTagCollection >	btagCSV_

double	btagCSVWP_

edm::EDGetTokenT < reco::JetTagCollection >	btagEff_
	btag discriminator labels More...

double	btagEffWP_
	btag working points More...

edm::EDGetTokenT < reco::JetTagCollection >	btagPur_

double	btagPurWP_

edm::EDGetTokenT < reco::JetTagCollection >	btagVtx_

double	btagVtxWP_

int	eidPattern_

StringCutObjectSelector < reco::GsfElectron > *	elecIso_
	extra isolation criterion on electron More...

edm::EDGetTokenT< edm::View < reco::GsfElectron > >	elecs_

StringCutObjectSelector < reco::GsfElectron > *	elecSelect_
	extra selection on electrons More...

edm::EDGetTokenT < edm::ValueMap< float > >	electronId_
	electronId label More...

std::map< std::string, MonitorElement * >	hists_
	histogram container More...

bool	includeBTag_

std::string	jetCorrector_
	jetCorrector More...

edm::EDGetTokenT < reco::JetIDValueMap >	jetIDLabel_
	jetID as an extra selection type More...

StringCutObjectSelector < reco::JetID > *	jetIDSelect_
	extra jetID selection on calo jets More...

edm::EDGetTokenT< edm::View < reco::Jet > >	jets_
	input sources for monitoring More...

std::string	jetSelect_

std::string	label_
	instance label More...

int	logged_
	number of logged interesting events More...

double	lowerEdge_
	mass window upper and lower edge More...

std::vector< edm::EDGetTokenT < edm::View< reco::MET > > >	mets_
	considers a vector of METs More...

StringCutObjectSelector < reco::Muon > *	muonIso_
	extra isolation criterion on muon More...

edm::EDGetTokenT< edm::View < reco::Muon > >	muons_

StringCutObjectSelector < reco::Muon > *	muonSelect_
	extra selection on muons More...

edm::EDGetTokenT< edm::View < reco::Vertex > >	pvs_

StringCutObjectSelector < reco::Vertex > *	pvSelect_
	extra selection on primary vertices; meant to investigate the pile-up effect More...

DQMStore *	store_
	storage manager More...

edm::EDConsumerBase	tmpConsumerBase

std::vector< std::string >	triggerPaths_

edm::EDGetTokenT < edm::TriggerResults >	triggerTable_
	trigger table More...

double	upperEdge_

Level	verbosity_
	verbosity level for booking More...

Detailed Description

Definition at line 41 of file TopSingleLeptonDQM.h.

Member Enumeration Documentation

enum TopSingleLepton::MonitorEnsemble::Level

different verbosity levels

Enumerator
STANDARD
VERBOSE
DEBUG

Definition at line 44 of file TopSingleLeptonDQM.h.

44 { STANDARD, VERBOSE, DEBUG };

TopSingleLepton::MonitorEnsemble::VERBOSE

Definition: TopSingleLeptonDQM.h:44

TopSingleLepton::MonitorEnsemble::STANDARD

Definition: TopSingleLeptonDQM.h:44

TopSingleLepton::MonitorEnsemble::DEBUG

Definition: TopSingleLeptonDQM.h:44

Constructor & Destructor Documentation

MonitorEnsemble::MonitorEnsemble	(	const char *	label,
		const edm::ParameterSet &	cfg,
		edm::ConsumesCollector &&	iC
	)

default contructor

Definition at line 21 of file TopSingleLeptonDQM.cc.

References book(), btagCSV_, btagCSVWP_, btagEff_, btagEffWP_, btagPur_, btagPurWP_, btagVtx_, btagVtxWP_, DEBUG, eidPattern_, elecIso_, elecs_, elecSelect_, electronId_, edm::ParameterSet::existsAs(), edm::ParameterSet::getParameter(), includeBTag_, jetCorrector_, bTagSequences_cff::jetID, jetIDLabel_, jetIDSelect_, jets_, jetSelect_, lowerEdge_, mets_, muonIso_, muons_, muonSelect_, pvs_, pvSelect_, STANDARD, AlCaHLTBitMon_QueryRunRegistry::string, GlobalPosition_Frontier_DevDB_cff::tag, triggerPaths_, triggerTable_, upperEdge_, VERBOSE, and verbosity_.

                                                                                                             : 
     label_(label), elecIso_(0), elecSelect_(0), pvSelect_(0), muonIso_(0), muonSelect_(0), jetIDSelect_(0), includeBTag_(false), lowerEdge_(-1.), upperEdge_(-1.), logged_(0)
   {
     // sources have to be given; this PSet is not optional
     edm::ParameterSet sources=cfg.getParameter<edm::ParameterSet>("sources");
     muons_ = iC.consumes<edm::View<reco::Muon> >(sources.getParameter<edm::InputTag>("muons"));
     elecs_ = iC.consumes<edm::View<reco::GsfElectron> >(sources.getParameter<edm::InputTag>("elecs"));
     pvs_ = iC.consumes<edm::View<reco::Vertex> >(sources.getParameter<edm::InputTag>("pvs"));
     jets_ = iC.consumes<edm::View<reco::Jet> >(sources.getParameter<edm::InputTag>("jets"));
     for (edm::InputTag const & tag : sources.getParameter<std::vector<edm::InputTag> >("mets"))
         mets_.push_back( iC.consumes<edm::View<reco::MET> >(tag) ); 
     // electronExtras are optional; they may be omitted or 
     // empty
     if( cfg.existsAs<edm::ParameterSet>("elecExtras") ){
       edm::ParameterSet elecExtras=cfg.getParameter<edm::ParameterSet>("elecExtras");
       // select is optional; in case it's not found no
       // selection will be applied
       if( elecExtras.existsAs<std::string>("select") ){
         elecSelect_= new StringCutObjectSelector<reco::GsfElectron>(elecExtras.getParameter<std::string>("select"));
       }
       // isolation is optional; in case it's not found no
       // isolation will be applied
       if( elecExtras.existsAs<std::string>("isolation") ){
         elecIso_= new StringCutObjectSelector<reco::GsfElectron>(elecExtras.getParameter<std::string>("isolation"));
       }
       // electronId is optional; in case it's not found the
       // InputTag will remain empty
       if( elecExtras.existsAs<edm::ParameterSet>("electronId") ){
         edm::ParameterSet elecId=elecExtras.getParameter<edm::ParameterSet>("electronId");
         electronId_= iC.consumes<edm::ValueMap<float> >(elecId.getParameter<edm::InputTag>("src"));
         eidPattern_= elecId.getParameter<int>("pattern");
       }
     }
     // pvExtras are opetional; they may be omitted or empty
     if(cfg.existsAs<edm::ParameterSet>("pvExtras")){
       edm::ParameterSet pvExtras=cfg.getParameter<edm::ParameterSet>("pvExtras");
       // select is optional; in case it's not found no
       // selection will be applied
       if( pvExtras.existsAs<std::string>("select") ){
     pvSelect_= new StringCutObjectSelector<reco::Vertex>(pvExtras.getParameter<std::string>("select"));
       }
     }
     // muonExtras are optional; they may be omitted or empty
     if( cfg.existsAs<edm::ParameterSet>("muonExtras") ){
       edm::ParameterSet muonExtras=cfg.getParameter<edm::ParameterSet>("muonExtras");
       // select is optional; in case it's not found no
       // selection will be applied
       if( muonExtras.existsAs<std::string>("select") ){
     muonSelect_= new StringCutObjectSelector<reco::Muon>(muonExtras.getParameter<std::string>("select"));
       }
       // isolation is optional; in case it's not found no
       // isolation will be applied
       if( muonExtras.existsAs<std::string>("isolation") ){
     muonIso_= new StringCutObjectSelector<reco::Muon>(muonExtras.getParameter<std::string>("isolation"));
       }
     }
 
     // jetExtras are optional; they may be omitted or
     // empty
     if( cfg.existsAs<edm::ParameterSet>("jetExtras") ){
       edm::ParameterSet jetExtras=cfg.getParameter<edm::ParameterSet>("jetExtras");
       // jetCorrector is optional; in case it's not found
       // the InputTag will remain empty
       if( jetExtras.existsAs<std::string>("jetCorrector") ){
     jetCorrector_= jetExtras.getParameter<std::string>("jetCorrector");
       }
       // read jetID information if it exists
       if(jetExtras.existsAs<edm::ParameterSet>("jetID")){
     edm::ParameterSet jetID=jetExtras.getParameter<edm::ParameterSet>("jetID");
     jetIDLabel_ = iC.consumes<reco::JetIDValueMap>(jetID.getParameter<edm::InputTag>("label"));
     jetIDSelect_= new StringCutObjectSelector<reco::JetID>(jetID.getParameter<std::string>("select"));
       }
       // select is optional; in case it's not found no
       // selection will be applied (only implemented for
       // CaloJets at the moment)
       if( jetExtras.existsAs<std::string>("select") ){
     jetSelect_= jetExtras.getParameter<std::string>("select");
       }
       // jetBDiscriminators are optional; in case they are
       // not found the InputTag will remain empty; they
       // consist of pairs of edm::JetFlavorAssociation's &
       // corresponding working points
       includeBTag_=jetExtras.existsAs<edm::ParameterSet>("jetBTaggers");
       if( includeBTag_ ){
     edm::ParameterSet btagEff=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("trackCountingEff");
     btagEff_= iC.consumes<reco::JetTagCollection>(btagEff.getParameter<edm::InputTag>("label"));  btagEffWP_= btagEff.getParameter<double>("workingPoint");
     edm::ParameterSet btagPur=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("trackCountingPur");
     btagPur_= iC.consumes<reco::JetTagCollection>(btagPur.getParameter<edm::InputTag>("label"));  btagPurWP_= btagPur.getParameter<double>("workingPoint");
     edm::ParameterSet btagVtx=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("secondaryVertex" );
     btagVtx_= iC.consumes<reco::JetTagCollection>(btagVtx.getParameter<edm::InputTag>("label"));  btagVtxWP_= btagVtx.getParameter<double>("workingPoint");
         edm::ParameterSet btagCSV=jetExtras.getParameter<edm::ParameterSet>("jetBTaggers").getParameter<edm::ParameterSet>("cvsVertex");
         btagCSV_= iC.consumes<reco::JetTagCollection>(btagCSV.getParameter<edm::InputTag>("label")); btagCSVWP_= btagCSV.getParameter<double>("workingPoint");
       }
     }
 
     // triggerExtras are optional; they may be omitted or empty
     if( cfg.existsAs<edm::ParameterSet>("triggerExtras") ){
       edm::ParameterSet triggerExtras=cfg.getParameter<edm::ParameterSet>("triggerExtras");
       triggerTable_=iC.consumes<edm::TriggerResults>(triggerExtras.getParameter<edm::InputTag>("src"));
       triggerPaths_=triggerExtras.getParameter<std::vector<std::string> >("paths");
     }
 
     // massExtras is optional; in case it's not found no mass
     // window cuts are applied for the same flavor monitor
     // histograms
     if( cfg.existsAs<edm::ParameterSet>("massExtras") ){
       edm::ParameterSet massExtras=cfg.getParameter<edm::ParameterSet>("massExtras");
       lowerEdge_= massExtras.getParameter<double>("lowerEdge");
       upperEdge_= massExtras.getParameter<double>("upperEdge");
     }
 
     // setup the verbosity level for booking histograms;
     // per default the verbosity level will be set to
     // STANDARD. This will also be the chosen level in
     // the case when the monitoring PSet is not found
     verbosity_=STANDARD;
     if( cfg.existsAs<edm::ParameterSet>("monitoring") ){
       edm::ParameterSet monitoring=cfg.getParameter<edm::ParameterSet>("monitoring");
       if(monitoring.getParameter<std::string>("verbosity") == "DEBUG"   )
     verbosity_= DEBUG;
       if(monitoring.getParameter<std::string>("verbosity") == "VERBOSE" )
     verbosity_= VERBOSE;
       if(monitoring.getParameter<std::string>("verbosity") == "STANDARD")
     verbosity_= STANDARD;
     }
     // and don't forget to do the histogram booking
     book(cfg.getParameter<std::string>("directory"));
   }

TopSingleLepton::MonitorEnsemble::~MonitorEnsemble ( )

inline

default destructor

Definition at line 50 of file TopSingleLeptonDQM.h.

50 {};

Member Function Documentation

void MonitorEnsemble::book ( std::string directory )

book histograms in subdirectory directory

Definition at line 151 of file TopSingleLeptonDQM.cc.

References DQMStore::book1D(), DQMStore::book2D(), cond::rpcobimon::current, hists_, label_, cppFunctionSkipper::operator, DQMStore::setCurrentFolder(), STANDARD, store_, AlCaHLTBitMon_QueryRunRegistry::string, triggerBinLabels(), triggerPaths_, VERBOSE, and verbosity_.

Referenced by MonitorEnsemble().

   {
     //set up the current directory path
     std::string current(directory); current+=label_;
     store_=edm::Service<DQMStore>().operator->();
     store_->setCurrentFolder(current);
 
     // determine number of bins for trigger monitoring
     unsigned int nPaths=triggerPaths_.size();
 
     // --- [STANDARD] --- //
     //Run Number
     hists_["RunNumb_"    ] = store_->book1D("RunNumber"  , "Run Nr."          ,   1.e4,  1.5e5,    3.e5);
     //instantaneous luminosity
     hists_["InstLumi_"   ] = store_->book1D("InstLumi"   , "Inst. Lumi."      ,    100,     0.,    1.e3);
     // number of selected primary vertices
     hists_["pvMult_"     ] = store_->book1D("PvMult"     , "N_{pvs}"          ,     100,     0.,    100.);
     // pt of the leading muon
     hists_["muonPt_"     ] = store_->book1D("MuonPt"     , "pt(#mu)"          ,     50,     0.,    250.);
     // muon multiplicity before std isolation
     hists_["muonMult_"   ] = store_->book1D("MuonMult"   , "N_{All}(#mu)"     ,     10,     0.,     10.);
     // muon multiplicity after  std isolation
     hists_["muonMultIso_"] = store_->book1D("MuonMultIso", "N_{Iso}(#mu)"     ,     10,     0.,     10.);
     // pt of the leading electron
     hists_["elecPt_"     ] = store_->book1D("ElecPt"     , "pt(e)"            ,     50,     0.,    250.);
     // electron multiplicity before std isolation
     hists_["elecMult_"   ] = store_->book1D("ElecMult"   , "N_{All}(e)"       ,     10,     0.,     10.);
     // electron multiplicity after  std isolation
     hists_["elecMultIso_"] = store_->book1D("ElecMultIso", "N_{Iso}(e)"       ,     10,     0.,     10.);
     // multiplicity of jets with pt>20 (corrected to L2+L3)
     hists_["jetMult_"    ] = store_->book1D("JetMult"    , "N_{30}(jet)"      ,     10,     0.,     10.);
     // trigger efficiency estimates for single lepton triggers
     hists_["triggerEff_" ] = store_->book1D("TriggerEff" , "Eff(trigger)"     , nPaths,     0.,  nPaths);
     // monitored trigger occupancy for single lepton triggers
     hists_["triggerMon_" ] = store_->book1D("TriggerMon" , "Mon(trigger)"     , nPaths,     0.,  nPaths);
     // MET (calo)
     hists_["metCalo_"    ] = store_->book1D("METCalo"    , "MET_{Calo}"       ,     50,     0.,    200.);
     // W mass estimate
     hists_["massW_"      ] = store_->book1D("MassW"      , "M(W)"             ,     60,     0.,    300.);
     // Top mass estimate
     hists_["massTop_"    ] = store_->book1D("MassTop"    , "M(Top)"           ,     50,     0.,    500.);   
     // b-tagged Top mass
     hists_["massBTop_"   ] = store_->book1D("MassBTop"   , "M(Top, 1 b-tag)"  ,     50,     0.,    500.);
     // set bin labels for trigger monitoring
     triggerBinLabels(std::string("trigger"), triggerPaths_);
 
     if( verbosity_==STANDARD) return;
 
     // --- [VERBOSE] --- //
     // eta of the leading muon
     hists_["muonEta_"    ] = store_->book1D("MuonEta"    , "#eta(#mu)"        ,     30,    -3.,      3.);
     // std isolation variable of the leading muon
     hists_["muonRelIso_" ] = store_->book1D("MuonRelIso" , "Iso_{Rel}(#mu)"   ,     50,     0.,      1.);
     // eta of the leading electron
     hists_["elecEta_"    ] = store_->book1D("ElecEta"    , "#eta(e)"          ,     30,    -3.,      3.);
     // std isolation variable of the leading electron
     hists_["elecRelIso_" ] = store_->book1D("ElecRelIso" , "Iso_{Rel}(e)"     ,     50,     0.,      1.);
     // multiplicity of btagged jets (for track counting high efficiency) with pt(L2L3)>30
     hists_["jetMultBEff_"] = store_->book1D("JetMultBEff", "N_{30}(TCHE)"    ,     10,     0.,     10.);   
     // btag discriminator for track counting high efficiency for jets with pt(L2L3)>30
     hists_["jetBDiscEff_"] = store_->book1D("JetBDiscEff", "Disc_{TCHE}(jet)",     100,     0.,    10.);   
     // eta of the 1. leading jet (corrected to L2+L3)
     hists_["jet1Eta_"    ] = store_->book1D("Jet1Eta"    , "#eta_{L2L3}(jet1)",     60,     -3.,     3.);   
     // pt of the 1. leading jet (corrected to L2+L3)
     hists_["jet1Pt_"     ] = store_->book1D("Jet1Pt"     , "pt_{L2L3}(jet1)"  ,     60,     0.,    300.);   
    // eta of the 2. leading jet (corrected to L2+L3)
     hists_["jet2Eta_"    ] = store_->book1D("Jet2Eta"    , "#eta_{L2L3}(jet2)",     60,     -3.,     3.);   
     // pt of the 2. leading jet (corrected to L2+L3)
     hists_["jet2Pt_"     ] = store_->book1D("Jet2Pt"     , "pt_{L2L3}(jet2)"  ,     60,     0.,    300.);   
    // eta of the 3. leading jet (corrected to L2+L3)
     hists_["jet3Eta_"    ] = store_->book1D("Jet3Eta"    , "#eta_{L2L3}(jet3)",     60,     -3.,     3.);   
     // pt of the 3. leading jet (corrected to L2+L3)
     hists_["jet3Pt_"     ] = store_->book1D("Jet3Pt"     , "pt_{L2L3}(jet3)"  ,     60,     0.,    300.);   
    // eta of the 4. leading jet (corrected to L2+L3)
     hists_["jet4Eta_"    ] = store_->book1D("Jet4Eta"    , "#eta_{L2L3}(jet4)",     60,     -3.,     3.);   
     // pt of the 4. leading jet (corrected to L2+L3)
     hists_["jet4Pt_"     ] = store_->book1D("Jet4Pt"     , "pt_{L2L3}(jet4)"  ,     60,     0.,    300.);
     // MET (tc)
     hists_["metTC_"      ] = store_->book1D("METTC"      , "MET_{TC}"         ,     50,     0.,    200.);
     // MET (pflow)
     hists_["metPflow_"   ] = store_->book1D("METPflow"   , "MET_{Pflow}"      ,     50,     0.,    200.);
     // dz for muons (to suppress cosmis)
     hists_["muonDelZ_"    ] = store_->book1D("MuonDelZ"  , "d_{z}(#mu)"       ,     50,   -25.,     25.);
     // dxy for muons (to suppress cosmics)
     hists_["muonDelXY_"   ] = store_->book2D("MuonDelXY" , "d_{xy}(#mu)"      ,     50,   -0.1,     0.1,   50,   -0.1,   0.1);
 
     // set axes titles for dxy for muons
     hists_["muonDelXY_"   ]->setAxisTitle( "x [cm]", 1); hists_["muonDelXY_"   ]->setAxisTitle( "y [cm]", 2);
 
     if( verbosity_==VERBOSE) return;
 
     // --- [DEBUG] --- //
     // relative muon isolation in tracker for the leading muon
     hists_["muonTrkIso_" ] = store_->book1D("MuonTrkIso" , "Iso_{Trk}(#mu)"   ,     50,     0.,      1.);
     // relative muon isolation in ecal+hcal for the leading muon
     hists_["muonCalIso_" ] = store_->book1D("MuonCalIso" , "Iso_{Ecal}(#mu)"  ,     50,     0.,      1.);
     // relative electron isolation in tracker for the leading electron
     hists_["elecTrkIso_" ] = store_->book1D("ElecTrkIso" , "Iso_{Trk}(e)"     ,     50,     0.,      1.);
     // relative electron isolation in ecal+hcal for the leading electron
     hists_["elecCalIso_" ] = store_->book1D("ElecCalIso" , "Iso_{Ecal}(e)"    ,     50,     0.,      1.);
     // multiplicity of btagged jets (for track counting high purity) with pt(L2L3)>30
     hists_["jetMultBPur_"] = store_->book1D("JetMultBPur", "N_{30}(TCHP)"    ,     10,     0.,     10.);   
     // btag discriminator for track counting high purity
     hists_["jetBDiscPur_"] = store_->book1D("JetBDiscPur", "Disc_{TCHP}(Jet)",    100,     0.,    10.);   
     // multiplicity of btagged jets (for simple secondary vertex) with pt(L2L3)>30
     hists_["jetMultBVtx_"] = store_->book1D("JetMultBVtx", "N_{30}(SSVHE)"    ,    10,     0.,     10.);   
     // btag discriminator for simple secondary vertex
     hists_["jetBDiscVtx_"] = store_->book1D("JetBDiscVtx", "Disc_{SSVHE}(Jet)",    35,    -1.,      6.);   
     // multiplicity for combined secondary vertex
     hists_["jetMultCSVtx_"]= store_->book1D("JetMultCSV" , "N_{30}(CSV)"     ,      10,     0.,     10.);
     // btag discriminator for combined secondary vertex
     hists_["jetBCVtx_"]   = store_->book1D("JetDiscCSV"  , "Disc_{CSV}(JET)" ,     100,   -1.,      2.);
     // pt of the 1. leading jet (uncorrected)
     hists_["jet1PtRaw_"  ] = store_->book1D("Jet1PtRaw"  , "pt_{Raw}(jet1)"   ,     60,     0.,    300.);
     // pt of the 2. leading jet (uncorrected)
     hists_["jet2PtRaw_"  ] = store_->book1D("Jet2PtRaw"  , "pt_{Raw}(jet2)"   ,     60,     0.,    300.);
     // pt of the 3. leading jet (uncorrected)
     hists_["jet3PtRaw_"  ] = store_->book1D("Jet3PtRaw"  , "pt_{Raw}(jet3)"   ,     60,     0.,    300.);
     // pt of the 4. leading jet (uncorrected)
     hists_["jet4PtRaw_"  ] = store_->book1D("Jet4PtRaw"  , "pt_{Raw}(jet4)"   ,     60,     0.,    300.);
     // selected events
     hists_["eventLogger_"] = store_->book2D("EventLogger", "Logged Events"    ,      9,     0.,      9.,   10,   0.,   10.);
 
     // set axes titles for selected events
     hists_["eventLogger_"]->getTH1()->SetOption("TEXT");
     hists_["eventLogger_"]->setBinLabel( 1 , "Run"             , 1);
     hists_["eventLogger_"]->setBinLabel( 2 , "Block"           , 1);
     hists_["eventLogger_"]->setBinLabel( 3 , "Event"           , 1);
     hists_["eventLogger_"]->setBinLabel( 4 , "pt_{L2L3}(jet1)" , 1);
     hists_["eventLogger_"]->setBinLabel( 5 , "pt_{L2L3}(jet2)" , 1);
     hists_["eventLogger_"]->setBinLabel( 6 , "pt_{L2L3}(jet3)" , 1);
     hists_["eventLogger_"]->setBinLabel( 7 , "pt_{L2L3}(jet4)" , 1);
     hists_["eventLogger_"]->setBinLabel( 8 , "M_{W}"           , 1);
     hists_["eventLogger_"]->setBinLabel( 9 , "M_{Top}"         , 1);
     hists_["eventLogger_"]->setAxisTitle("logged evts"         , 2);
     return;
   }

bool TopSingleLepton::MonitorEnsemble::booked ( const std::string histName ) const

inlineprivate

check if histogram was booked

Definition at line 71 of file TopSingleLeptonDQM.h.

References hists_.

Referenced by fill().

71 { return hists_.find(histName.c_str())!=hists_.end(); };

TopSingleLepton::MonitorEnsemble::hists_

std::map< std::string, MonitorElement * > hists_

histogram container

Definition: TopSingleLeptonDQM.h:147

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::EventSetup &	setup
	)

fill monitor histograms with electronId and jetCorrections

Definition at line 290 of file TopSingleLeptonDQM.cc.

References btagCSV_, btagCSVWP_, btagEff_, btagEffWP_, btagPur_, btagPurWP_, btagVtx_, btagVtxWP_, JetCorrector::correction(), eidPattern_, elecIso_, elecs_, elecSelect_, electronId_, reco::LeafCandidate::eta(), edm::EventAuxiliary::event(), edm::Event::eventAuxiliary(), edm::EventSetup::find(), edm::Event::getByToken(), JetCorrector::getJetCorrector(), hists_, customizeTrackingMonitorSeedNumber::idx, includeBTag_, edm::EDGetTokenT< T >::isUninitialized(), metsig::jet, jetCorrector_, bTagSequences_cff::jetID, jetIDLabel_, jetIDSelect_, fwrapper::jets, jets_, jetSelect_, logged_, lowerEdge_, edm::EventAuxiliary::luminosityBlock(), Calculate::massBTopQuark(), Calculate::massTopQuark(), Calculate::massWBoson(), TopSingleLepton::MAXJETS, CaloMET_cfi::met, mets_, VarParsing::mult, metsig::muon, muonIso_, patZpeak::muons, muons_, muonSelect_, RecoTauCleanerPlugins::pt, reco::LeafCandidate::pt(), pvs_, pvSelect_, edm::EventAuxiliary::run(), reco::Jet::scaleEnergy(), EgammaValidation_Wenu_cff::sel, triggerPaths_, triggerTable_, upperEdge_, and TopSingleLepton::WMASS.

Referenced by fill().

   {
     // fetch trigger event if configured such
     edm::Handle<edm::TriggerResults> triggerTable;
      
     if(!triggerTable_.isUninitialized()) {
             if( !event.getByToken(triggerTable_, triggerTable) ) return;
     }
 
     /*
     ------------------------------------------------------------
 
     Primary Vertex Monitoring
 
     ------------------------------------------------------------
     */
     // fill monitoring plots for primary verices
     edm::Handle<edm::View<reco::Vertex> > pvs;
     if( !event.getByToken(pvs_, pvs) ) return;
     unsigned int pvMult = 0;
     for(edm::View<reco::Vertex>::const_iterator pv=pvs->begin(); pv!=pvs->end(); ++pv){
       if(!pvSelect_ || (*pvSelect_)(*pv))
     pvMult++;
     }
     fill("pvMult_",    pvMult   );
 
 
     /*
     ------------------------------------------------------------
     
     Run and Inst. Luminosity information (Inst. Lumi. filled now with a dummy value=5.0)
     
     ------------------------------------------------------------
     */
     if (!event.eventAuxiliary().run()) return;
     fill("RunNumb_", event.eventAuxiliary().run());   
     
     double dummy=5.; fill("InstLumi_", dummy);
      
 
     /* 
     ------------------------------------------------------------
 
     Electron Monitoring
 
     ------------------------------------------------------------
     */
 
     // fill monitoring plots for electrons
     edm::Handle<edm::View<reco::GsfElectron> > elecs;
     if( !event.getByToken(elecs_, elecs) ) return;
 
     // check availability of electron id
     edm::Handle<edm::ValueMap<float> > electronId; 
     if(!electronId_.isUninitialized()) {
       if( !event.getByToken(electronId_, electronId) ) return;
     }
 
     // loop electron collection
     unsigned int eMult=0, eMultIso=0;
     std::vector<const reco::GsfElectron*> isoElecs;
     for(edm::View<reco::GsfElectron>::const_iterator elec=elecs->begin(); elec!=elecs->end(); ++elec){
       unsigned int idx = elec-elecs->begin();
       // restrict to electrons with good electronId
       if( electronId_.isUninitialized() ? true : ((int)(*electronId)[elecs->refAt(idx)] & eidPattern_) ){
     if(!elecSelect_ || (*elecSelect_)(*elec)){
       double isolationTrk = elec->pt()/(elec->pt()+elec->dr03TkSumPt());
       double isolationCal = elec->pt()/(elec->pt()+elec->dr03EcalRecHitSumEt()+elec->dr03HcalTowerSumEt());
       double isolationRel = (elec->dr03TkSumPt()+elec->dr03EcalRecHitSumEt()+elec->dr03HcalTowerSumEt())/elec->pt();
       if( eMult==0 ){
         // restrict to the leading electron
         fill("elecPt_" , elec->pt() );
         fill("elecEta_", elec->eta());
         fill("elecRelIso_" , isolationRel );
         fill("elecTrkIso_" , isolationTrk );
         fill("elecCalIso_" , isolationCal );
       }
       // in addition to the multiplicity counter buffer the iso
       // electron candidates for later overlap check with jets
       ++eMult; if(!elecIso_ || (*elecIso_)(*elec)){ isoElecs.push_back(&(*elec)); ++eMultIso;}
     }
       }
     }
     fill("elecMult_",    eMult   );
     fill("elecMultIso_", eMultIso);
 
     /*
     ------------------------------------------------------------
 
     Muon Monitoring
 
     ------------------------------------------------------------
     */
 
     // fill monitoring plots for muons
     unsigned int mMult=0, mMultIso=0;
 
     edm::Handle<edm::View<reco::Muon> > muons;
     if( !event.getByToken(muons_, muons) ) return;
 
     for(edm::View<reco::Muon>::const_iterator muon=muons->begin(); muon!=muons->end(); ++muon){
       // restrict to globalMuons
       if( muon->isGlobalMuon() ){
     fill("muonDelZ_" , muon->globalTrack()->vz());
     fill("muonDelXY_", muon->globalTrack()->vx(), muon->globalTrack()->vy());
     // apply preselection
     if(!muonSelect_ || (*muonSelect_)(*muon)){
       double isolationTrk = muon->pt()/(muon->pt()+muon->isolationR03().sumPt);
       double isolationCal = muon->pt()/(muon->pt()+muon->isolationR03().emEt+muon->isolationR03().hadEt);
       double isolationRel = (muon->isolationR03().sumPt+muon->isolationR03().emEt+muon->isolationR03().hadEt)/muon->pt();
       if( mMult==0 ){
         // restrict to leading muon
         fill("muonPt_"     , muon->pt() );
         fill("muonEta_"    , muon->eta());
         fill("muonRelIso_" , isolationRel );
         fill("muonTrkIso_" , isolationTrk );
         fill("muonCalIso_" , isolationCal );
       }
        ++mMult; if(!muonIso_ || (*muonIso_)(*muon)) ++mMultIso;
     }
       }
     }
     fill("muonMult_",    mMult   );
     fill("muonMultIso_", mMultIso);
 
     /*
     ------------------------------------------------------------
 
     Jet Monitoring
 
     ------------------------------------------------------------
     */
 
     // check availability of the btaggers
     edm::Handle<reco::JetTagCollection> btagEff, btagPur, btagVtx, btagCSV;
     if( includeBTag_ ){ 
       if( !event.getByToken(btagEff_, btagEff) ) return;
       if( !event.getByToken(btagPur_, btagPur) ) return;
       if( !event.getByToken(btagVtx_, btagVtx) ) return;
       if( !event.getByToken(btagCSV_, btagCSV)) return;
     }
     // load jet corrector if configured such
     const JetCorrector* corrector=0;
     if(!jetCorrector_.empty()){
       // check whether a jet correcto is in the event setup or not
       if(setup.find( edm::eventsetup::EventSetupRecordKey::makeKey<JetCorrectionsRecord>() )){
     corrector = JetCorrector::getJetCorrector(jetCorrector_, setup);
       }
       else{
     edm::LogVerbatim( "TopSingleLeptonDQM" )
       << "\n"
       << "------------------------------------------------------------------------------------- \n"
       << " No JetCorrectionsRecord available from EventSetup:                                   \n"
       << "  - Jets will not be corrected.                                                       \n"
       << "  - If you want to change this add the following lines to your cfg file:              \n"
       << "                                                                                      \n"
       << "  ## load jet corrections                                                             \n"
       << "  process.load(\"JetMETCorrections.Configuration.JetCorrectionServicesAllAlgos_cff\") \n"
       << "  process.prefer(\"ak5CaloL2L3\")                                                     \n"
       << "                                                                                      \n"
       << "------------------------------------------------------------------------------------- \n";
       }
     }
 
     // loop jet collection
     std::vector<reco::Jet> correctedJets;
     std::vector<double> JetTagValues;
     unsigned int mult=0, multBEff=0, multBPur=0, multBVtx=0, multCSV=0;
     
     edm::Handle<edm::View<reco::Jet> > jets; 
     if( !event.getByToken(jets_, jets) ) {
     //cout<<"event does not contain "<<jets_.label()<<endl;
     return;
      }
 
     edm::Handle<reco::JetIDValueMap> jetID; 
     if(jetIDSelect_){ 
       if( !event.getByToken(jetIDLabel_, jetID) ) return;
     }
 
     for(edm::View<reco::Jet>::const_iterator jet=jets->begin(); jet!=jets->end(); ++jet){
       // check jetID for calo jets
       unsigned int idx = jet-jets->begin();
       if( jetIDSelect_ && dynamic_cast<const reco::CaloJet*>(jets->refAt(idx).get())){
     if(!(*jetIDSelect_)((*jetID)[jets->refAt(idx)])) continue;
       }
       // chekc additional jet selection for calo, pf and bare reco jets
       if(dynamic_cast<const reco::CaloJet*>(&*jet)){
     reco::CaloJet sel = dynamic_cast<const reco::CaloJet&>(*jet); sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
     StringCutObjectSelector<reco::CaloJet> jetSelect(jetSelect_); if(!jetSelect(sel)){ continue;}
       }
       else if(dynamic_cast<const reco::PFJet*>(&*jet)){
     reco::PFJet sel= dynamic_cast<const reco::PFJet&>(*jet); sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
     StringCutObjectSelector<reco::PFJet> jetSelect(jetSelect_); if(!jetSelect(sel)) continue;
       }
       else{
     reco::Jet sel = *jet; sel.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
     StringCutObjectSelector<reco::Jet> jetSelect(jetSelect_); if(!jetSelect(sel)) continue;
       }
       // check for overlaps -- comment this to be synchronous with the selection
       //bool overlap=false;
       //for(std::vector<const reco::GsfElectron*>::const_iterator elec=isoElecs.begin(); elec!=isoElecs.end(); ++elec){
       //  if(reco::deltaR((*elec)->eta(), (*elec)->phi(), jet->eta(), jet->phi())<0.4){overlap=true; break;}
       //} if(overlap){continue;}
 
       // prepare jet to fill monitor histograms
       reco::Jet monitorJet = *jet; monitorJet.scaleEnergy(corrector ? corrector->correction(*jet) : 1.);
       correctedJets.push_back(monitorJet);
       ++mult; // determine jet multiplicity
       if( includeBTag_ ){
     // fill b-discriminators
     edm::RefToBase<reco::Jet> jetRef = jets->refAt(idx);
     fill("jetBDiscEff_", (*btagEff)[jetRef]); if( (*btagEff)[jetRef]>btagEffWP_ ) ++multBEff; 
     fill("jetBDiscPur_", (*btagPur)[jetRef]); if( (*btagPur)[jetRef]>btagPurWP_ ) ++multBPur; 
     fill("jetBDiscVtx_", (*btagVtx)[jetRef]); if( (*btagVtx)[jetRef]>btagVtxWP_ ) ++multBVtx; 
         fill("jetBCVtx_"   , (*btagCSV)[jetRef]); if( (*btagCSV)[jetRef]>btagCSVWP_ ) ++multCSV;
         
         //Fill a vector with Jet b-tag WP for later M3+1tag calculation: CSV tagger
         JetTagValues.push_back( (*btagCSV)[jetRef]);
       }
       // fill pt (raw or L2L3) for the leading four jets  
       if(idx==0) {fill("jet1Pt_" , monitorJet.pt()); fill("jet1PtRaw_", jet->pt() );
                   fill("jet1Eta_", monitorJet.eta());
          };
       if(idx==1) {fill("jet2Pt_" , monitorJet.pt()); fill("jet2PtRaw_", jet->pt() );
                   fill("jet2Eta_", monitorJet.eta());
          }
       if(idx==2) {fill("jet3Pt_" , monitorJet.pt()); fill("jet3PtRaw_", jet->pt() );
                   fill("jet3Eta_", monitorJet.eta());
          }
       if(idx==3) {fill("jet4Pt_" , monitorJet.pt()); fill("jet4PtRaw_", jet->pt() );
                   fill("jet4Eta_", monitorJet.eta());
          }
     }
     fill("jetMult_"     , mult    );
     fill("jetMultBEff_" , multBEff);
     fill("jetMultBPur_" , multBPur);
     fill("jetMultBVtx_" , multBVtx);
     fill("jetMultCSVtx_", multCSV );
     
     /* 
     ------------------------------------------------------------
 
     MET Monitoring
 
     ------------------------------------------------------------
     */
 
     // fill monitoring histograms for met
     for(std::vector<edm::EDGetTokenT<edm::View<reco::MET> > >::const_iterator met_=mets_.begin(); met_!=mets_.end(); ++met_){
       edm::Handle<edm::View<reco::MET> > met;
       if( !event.getByToken(*met_, met) ) continue;
       if(met->begin()!=met->end()){
     unsigned int idx=met_-mets_.begin();
     if(idx==0) fill("metCalo_" , met->begin()->et());
     if(idx==1) fill("metTC_"   , met->begin()->et());
     if(idx==2) fill("metPflow_", met->begin()->et());
       }
     }
 
     /*
     ------------------------------------------------------------
 
     Event Monitoring
 
     ------------------------------------------------------------
     */
 
     // fill W boson and top mass estimates
     
     Calculate eventKinematics(MAXJETS, WMASS);
     double wMass   = eventKinematics.massWBoson   (correctedJets);
     double topMass = eventKinematics.massTopQuark (correctedJets);
     if(wMass>=0 && topMass>=0 ) {fill("massW_" ,   wMass  );fill("massTop_" , topMass);}
     
     // Fill M3 with Btag (CSV Tight) requirement
     
     if (!includeBTag_) return;
     if (correctedJets.size() != JetTagValues.size()) return;
     double btopMass= eventKinematics.massBTopQuark(correctedJets, JetTagValues, btagCSVWP_);
     if (btopMass>=0) fill("massBTop_", btopMass);
     
     // fill plots for trigger monitoring
     if((lowerEdge_==-1. && upperEdge_==-1.) || (lowerEdge_<wMass && wMass<upperEdge_) ){
       if(!triggerTable_.isUninitialized()) fill(event, *triggerTable, "trigger", triggerPaths_);
       if(logged_<=hists_.find("eventLogger_")->second->getNbinsY()){
     // log runnumber, lumi block, event number & some
     // more pysics infomation for interesting events
     fill("eventLogger_", 0.5, logged_+0.5, event.eventAuxiliary().run());
     fill("eventLogger_", 1.5, logged_+0.5, event.eventAuxiliary().luminosityBlock());
     fill("eventLogger_", 2.5, logged_+0.5, event.eventAuxiliary().event());
     if(correctedJets.size()>0) fill("eventLogger_", 3.5, logged_+0.5, correctedJets[0].pt());
     if(correctedJets.size()>1) fill("eventLogger_", 4.5, logged_+0.5, correctedJets[1].pt());
     if(correctedJets.size()>2) fill("eventLogger_", 5.5, logged_+0.5, correctedJets[2].pt());
     if(correctedJets.size()>3) fill("eventLogger_", 6.5, logged_+0.5, correctedJets[3].pt());
     fill("eventLogger_", 7.5, logged_+0.5, wMass  );
     fill("eventLogger_", 8.5, logged_+0.5, topMass);
     ++logged_;
       }
     }
   }

void MonitorEnsemble::fill	(	const edm::Event &	event,
		const edm::TriggerResults &	triggerTable,
		std::string	channel,
		const std::vector< std::string >	labels
	)		const

inlineprivate

fill trigger monitoring histograms

Definition at line 161 of file TopSingleLeptonDQM.h.

References accept(), fill(), hists_, customizeTrackingMonitorSeedNumber::idx, monitorPath(), selectionPath(), and relativeConstraints::value.

   {
     for(unsigned int idx=0; idx<labels.size(); ++idx){
       if( accept(event, triggerTable, monitorPath(labels[idx])) ){
     fill((channel+"Mon_").c_str(), idx+0.5 );
     // take care to fill triggerMon_ before evts is being called
     int evts = hists_.find((channel+"Mon_").c_str())->second->getBinContent(idx+1);
     double value = hists_.find((channel+"Eff_").c_str())->second->getBinContent(idx+1);
     fill((channel+"Eff_").c_str(), idx+0.5, 1./evts*(accept(event, triggerTable, selectionPath(labels[idx]))-value));
       }
     }
   }

void TopSingleLepton::MonitorEnsemble::fill	(	const std::string	histName,
		double	value
	)		const

inlineprivate

fill histogram if it had been booked before

Definition at line 73 of file TopSingleLeptonDQM.h.

References booked(), hists_, and edm::second().

73 { if(booked(histName.c_str())) hists_.find(histName.c_str())->second->Fill(value); };

TopSingleLepton::MonitorEnsemble::hists_

std::map< std::string, MonitorElement * > hists_

histogram container

Definition: TopSingleLeptonDQM.h:147

relativeConstraints.value

tuple value

Definition: relativeConstraints.py:54

edm::second

U second(std::pair< T, U > const &p)

Definition: ParameterSet.cc:250

TopSingleLepton::MonitorEnsemble::booked

bool booked(const std::string histName) const

check if histogram was booked

Definition: TopSingleLeptonDQM.h:71

void TopSingleLepton::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 75 of file TopSingleLeptonDQM.h.

References booked(), hists_, and edm::second().

75 { if(booked(histName.c_str())) hists_.find(histName.c_str())->second->Fill(xValue, yValue); };

TopSingleLepton::MonitorEnsemble::hists_

std::map< std::string, MonitorElement * > hists_

histogram container

Definition: TopSingleLeptonDQM.h:147

edm::second

U second(std::pair< T, U > const &p)

Definition: ParameterSet.cc:250

TopSingleLepton::MonitorEnsemble::booked

bool booked(const std::string histName) const

check if histogram was booked

Definition: TopSingleLeptonDQM.h:71

void TopSingleLepton::MonitorEnsemble::fill	(	const std::string	histName,
		double	xValue,
		double	yValue,
		double	zValue
	)		const

inlineprivate

fill histogram if it had been booked before (2-dim version)

Definition at line 77 of file TopSingleLeptonDQM.h.

77 { if(booked(histName.c_str())) hists_.find(histName.c_str())->second->Fill(xValue, yValue, zValue); };

TopSingleLepton::MonitorEnsemble::hists_

std::map< std::string, MonitorElement * > hists_

histogram container

Definition: TopSingleLeptonDQM.h:147

edm::second

U second(std::pair< T, U > const &p)

Definition: ParameterSet.cc:250

TopSingleLepton::MonitorEnsemble::booked

bool booked(const std::string histName) const

check if histogram was booked

Definition: TopSingleLeptonDQM.h:71

std::string TopSingleLepton::MonitorEnsemble::monitorPath ( const std::string & label ) const

inlineprivate

deduce monitorPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 60 of file TopSingleLeptonDQM.h.

Referenced by fill(), and triggerBinLabels().

60 { return label.substr(label.find(':')+1); };

diffTwoXMLs.label

list label

Definition: diffTwoXMLs.py:42

std::string TopSingleLepton::MonitorEnsemble::selectionPath ( const std::string & label ) const

inlineprivate

deduce selectionPath from label, the label is expected to be of type 'selectionPath:monitorPath'

Definition at line 63 of file TopSingleLeptonDQM.h.

Referenced by fill(), and triggerBinLabels().

63 { return label.substr(0, label.find(':')); };

diffTwoXMLs.label

list label

Definition: diffTwoXMLs.py:42

void MonitorEnsemble::triggerBinLabels	(	std::string	channel,
		const std::vector< std::string >	labels
	)

inlineprivate

set configurable labels for trigger monitoring histograms

Definition at line 152 of file TopSingleLeptonDQM.h.

References hists_, customizeTrackingMonitorSeedNumber::idx, monitorPath(), and selectionPath().

Referenced by book().

   {
     for(unsigned int idx=0; idx<labels.size(); ++idx){
       hists_[(channel+"Mon_").c_str()]->setBinLabel( idx+1, "["+monitorPath(labels[idx])+"]", 1);
       hists_[(channel+"Eff_").c_str()]->setBinLabel( idx+1, "["+selectionPath(labels[idx])+"]|["+monitorPath(labels[idx])+"]", 1);
     }
   }

Member Data Documentation

edm::EDGetTokenT<reco::JetTagCollection> TopSingleLepton::MonitorEnsemble::btagCSV_

private

Definition at line 136 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

double TopSingleLepton::MonitorEnsemble::btagCSVWP_

private

Definition at line 138 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

edm::EDGetTokenT<reco::JetTagCollection> TopSingleLepton::MonitorEnsemble::btagEff_

private

btag discriminator labels

Definition at line 136 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

double TopSingleLepton::MonitorEnsemble::btagEffWP_

private

btag working points

Definition at line 138 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

edm::EDGetTokenT<reco::JetTagCollection> TopSingleLepton::MonitorEnsemble::btagPur_

private

Definition at line 136 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

double TopSingleLepton::MonitorEnsemble::btagPurWP_

private

Definition at line 138 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

edm::EDGetTokenT<reco::JetTagCollection> TopSingleLepton::MonitorEnsemble::btagVtx_

private

Definition at line 136 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

double TopSingleLepton::MonitorEnsemble::btagVtxWP_

private

Definition at line 138 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

int TopSingleLepton::MonitorEnsemble::eidPattern_

private

electronId pattern we expect the following pattern: 0: fails 1: passes electron ID only 2: passes electron Isolation only 3: passes electron ID and Isolation only 4: passes conversion rejection 5: passes conversion rejection and ID 6: passes conversion rejection and Isolation 7: passes the whole selection As described on https://twiki.cern.ch/twiki/bin/view/CMS/SimpleCutBasedEleID

Definition at line 109 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().

StringCutObjectSelector<reco::GsfElectron>* TopSingleLepton::MonitorEnsemble::elecIso_

private

extra isolation criterion on electron

Definition at line 111 of file TopSingleLeptonDQM.h.

Referenced by fill(), and MonitorEnsemble().