hcalCalibUtils.h File Reference

#include <vector>
#include <map>
#include "DataFormats/DetId/interface/DetId.h"
#include "DataFormats/HcalDetId/interface/HcalDetId.h"
#include "Calibration/HcalCalibAlgos/src/TCell.h"
#include "DataFormats/GeometryVector/interface/GlobalPoint.h"
#include "DataFormats/GeometryVector/interface/GlobalVector.h"
#include "Geometry/CaloGeometry/interface/CaloGeometry.h"

Go to the source code of this file.

Functions
void	combinePhi (std::vector< TCell > &selectCells)
void	combinePhi (std::vector< TCell > &selectCells, std::vector< TCell > &combinedCells)
void	filterCells3x3 (std::vector< TCell > &selectCells, Int_t iEta, UInt_t iPhi)
void	filterCells5x5 (std::vector< TCell > &selectCells, Int_t iEta, UInt_t iPhi)
void	filterCellsInCone (std::vector< TCell > &selectCells, const GlobalPoint hitPositionHcal, Float_t maxConeDist, const CaloGeometry *theCaloGeometry)
void	getIEtaIPhiForHighestE (std::vector< TCell > &selectCells, Int_t &iEta, UInt_t &iPhi)
void	sumDepths (std::vector< TCell > &selectCells)
void	sumSmallDepths (std::vector< TCell > &selectCells)

Function Documentation

void combinePhi

(

std::vector< TCell > &

selectCells

)

Definition at line 94 of file hcalCalibUtils.cc.

                                            {
  
  // Map: NxN -> N cluster
  // Comine the targetE of cells with the same iEta

  if (selectCells.size()==0) return;
    
  // new container for the TCells
  // dummy cell id created with iEta; iPhi=1; depth
  // if combinePhi() is run after combining depths, depth=1
  vector<TCell> combinedCells;
    
  map<UInt_t, vector<Float_t> > etaSliceE; // keyed by id of cell with iEta and **iPhi=1**
    
  // map the cells to the eta ring
  vector<TCell>::iterator i_it = selectCells.begin();
  for (; i_it != selectCells.end(); ++i_it) {
    DetId id = HcalDetId(i_it->id());
    UInt_t thisKey = HcalDetId(HcalDetId(id).subdet(), HcalDetId(id).ieta(), 1, HcalDetId(id).depth() );
    etaSliceE[thisKey].push_back(i_it->e());
  }
    
  map<UInt_t, vector<Float_t> >::iterator m_it = etaSliceE.begin();
  for (; m_it != etaSliceE.end(); ++m_it) {
    combinedCells.push_back(TCell(m_it->first, accumulate(m_it->second.begin(), m_it->second.end(), 0.0) ) );
  }
    
  // replace the original TCell vector with the new one
  selectCells = combinedCells;
    
}

void combinePhi	(	std::vector< TCell > &	selectCells,
		std::vector< TCell > &	combinedCells
	)

Definition at line 127 of file hcalCalibUtils.cc.

                                                                          {
  
  // Map: NxN -> N cluster
  // Comine the targetE of cells with the same iEta

  if (selectCells.size()==0) return;
    
  map<UInt_t, vector<Float_t> > etaSliceE; // keyed by id of cell with iEta and **iPhi=1**
    
  // map the cells to the eta ring
  vector<TCell>::iterator i_it = selectCells.begin();
  for (; i_it != selectCells.end(); ++i_it) {
    DetId id = HcalDetId(i_it->id());
    UInt_t thisKey = HcalDetId(HcalDetId(id).subdet(), HcalDetId(id).ieta(), 1, HcalDetId(id).depth() );
    etaSliceE[thisKey].push_back(i_it->e());
  }
    
  map<UInt_t, vector<Float_t> >::iterator m_it = etaSliceE.begin();
  for (; m_it != etaSliceE.end(); ++m_it) {
    combinedCells.push_back(TCell(m_it->first, accumulate(m_it->second.begin(), m_it->second.end(), 0.0) ) );
  }
        
}

void filterCells3x3	(	std::vector< TCell > &	selectCells,
		Int_t	iEta,
		UInt_t	iPhi
	)

Definition at line 185 of file hcalCalibUtils.cc.

References funct::abs(), and dPhi().

Referenced by hcalCalib::Process().

                                                                                 {
    
  vector<TCell> filteredCells;
    
  Int_t dEta, dPhi;
    
  for (vector<TCell>::iterator it=selectCells.begin(); it!=selectCells.end(); ++it) {

    Bool_t passDEta = false;
    Bool_t passDPhi = false;

    dEta = HcalDetId(it->id()).ieta() - iEtaMaxE;
    dPhi = HcalDetId(it->id()).iphi() - iPhiMaxE;

    if (dPhi >  36) dPhi -= 72;
    if (dPhi < -36) dPhi += 72; 

    if (abs(dEta)<=1 || (iEtaMaxE * HcalDetId(it->id()).ieta() == -1)) passDEta = true;

    if (abs(iEtaMaxE)<=20) {

      if (abs(HcalDetId(it->id()).ieta())<=20) {
    if (abs(dPhi)<=1) passDPhi = true;
      }
      else {
    // iPhi is labelled by odd numbers
    if (iPhiMaxE%2==0){
      if (abs(dPhi)<=1) passDPhi = true;
    }
    else {
      if (dPhi== -2 || dPhi==0) passDPhi = true;
    }
      }

    } // if hottest cell with iEta<=20
  
    else {      
      if (abs(HcalDetId(it->id()).ieta())<=20) {
    if (abs(dPhi)<=1 || dPhi==2)  passDPhi = true;
      }
      else {
    if (abs(dPhi)<=2) passDPhi = true;
      }
    } // if hottest cell with iEta>20
                 
    if (passDEta && passDPhi) filteredCells.push_back(*it);
  }
    
  selectCells = filteredCells;

  return;
}

void filterCells5x5	(	std::vector< TCell > &	selectCells,
		Int_t	iEta,
		UInt_t	iPhi
	)

Definition at line 246 of file hcalCalibUtils.cc.

References funct::abs(), and dPhi().

Referenced by hcalCalib::Process().

                                                                                 {
    
  vector<TCell> filteredCells;
    
  Int_t dEta, dPhi;
    
  for (vector<TCell>::iterator it=selectCells.begin(); it!=selectCells.end(); ++it) {
 
    dEta = HcalDetId(it->id()).ieta() - iEtaMaxE;
    dPhi = HcalDetId(it->id()).iphi() - iPhiMaxE;
  
    if (dPhi >  36) dPhi -= 72;
    if (dPhi < -36) dPhi += 72; 

    bool passDPhi = (abs(dPhi)<3);

    bool passDEta = (abs(dEta)<3 || (iEtaMaxE * HcalDetId(it->id()).ieta() == -2) );  
    // includes  +/- eta boundary 

    if (passDPhi && passDEta) filteredCells.push_back(*it);

  }
    
  selectCells = filteredCells;

  return;
}

void filterCellsInCone	(	std::vector< TCell > &	selectCells,
		const GlobalPoint	hitPositionHcal,
		Float_t	maxConeDist,
		const CaloGeometry *	theCaloGeometry
	)

Definition at line 344 of file hcalCalibUtils.cc.

References getDistInPlaneSimple(), CaloGeometry::getPosition(), and diJetCalib::maxConeDist.

Referenced by hcalCalib::Process().

                                                                         {

  vector<TCell> filteredCells;
      
  for (vector<TCell>::iterator it=selectCells.begin(); it!=selectCells.end(); ++it) {

    const GlobalPoint recHitPoint = theCaloGeometry->getPosition(it->id());

    if (getDistInPlaneSimple(hitPositionHcal, recHitPoint)<= maxConeDist) 
      filteredCells.push_back(*it);
  }

  selectCells = filteredCells;

  return;
}

void getIEtaIPhiForHighestE	(	std::vector< TCell > &	selectCells,
		Int_t &	iEta,
		UInt_t &	iPhi
	)

Definition at line 153 of file hcalCalibUtils.cc.

References alignCSCRings::e, and diJetCalib::sumDepths.

Referenced by hcalCalib::Process().

                                                                                             {
  
  
  vector<TCell> summedDepthsCells = selectCells;

  sumDepths(summedDepthsCells);  
  vector<TCell>::iterator  highCell = summedDepthsCells.begin();
   
  // sum depths locally to get highest energy tower
 
  Float_t highE = -999;
    
  for (vector<TCell>::iterator it=summedDepthsCells.begin(); it!=summedDepthsCells.end(); ++it) {
    if (highE < it->e()) {
      highCell = it;
      highE = it->e();
    }
  }

  iEtaMostE = HcalDetId(highCell->id()).ieta();
  iPhiMostE = HcalDetId(highCell->id()).iphi();

  return;
}

void sumDepths

(

std::vector< TCell > &

selectCells

)

Definition at line 14 of file hcalCalibUtils.cc.

References funct::abs(), gather_cfg::cout, and HcalBarrel.

                                           {
    
  // Assignes teh sum of the energy in cells with the same iEta, iPhi to the cell with depth=1.
  // All cells with depth>1 are removed form the container. If
  // the cell at depth=1 is not present: create it and follow the procedure. 
    
  if (selectCells.size()==0) return;

  vector<TCell> selectCellsDepth1;
  vector<TCell> selectCellsHighDepth;
    
  //
  // NB: Here we add depth 3 for iEta==16 in *HE* to the value in the barrel
  // this approach is reflected in several of the following loops: make sure
  // to check when making changes.
  //
  // In some documents it is described as having depth 1, the mapping in CMSSW uses depth 3.
    
  for (vector<TCell>::iterator i_it = selectCells.begin(); i_it != selectCells.end(); ++i_it) {
    if (HcalDetId(i_it->id()).depth()==1) {
      selectCellsDepth1.push_back(*i_it);
    }
    else {
      selectCellsHighDepth.push_back(*i_it);
    }
  }
    
    
    
  // case where depth 1 has zero energy, but higher depths with same (iEta, iPhi) have energy.
  // For iEta<15 there is one depth -> selectCellsHighDepth is empty and we do not get in the loop.
  for (vector<TCell>::iterator i_it2 = selectCellsHighDepth.begin(); i_it2 != selectCellsHighDepth.end(); ++i_it2) {


    // protect against corrupt data      
    if (HcalDetId(i_it2->id()).ietaAbs()<15 && HcalDetId(i_it2->id()).depth()>1) {
      cout << "ERROR!!! there are no HB cells with depth>1 for iEta<15!\n"
       << "Check the input data..." << endl;
      cout << "HCalDetId: "  <<  HcalDetId(i_it2->id()) << endl;
      return;
    }


    bool foundDepthOne = false;
    for (vector<TCell>::iterator i_it = selectCellsDepth1.begin(); i_it != selectCellsDepth1.end(); ++i_it) {
      if (HcalDetId(i_it->id()).ieta()==HcalDetId(i_it2->id()).ieta() && 
      HcalDetId(i_it->id()).iphi()==HcalDetId(i_it2->id()).iphi())
    foundDepthOne = true;
      continue;
    }
    if (!foundDepthOne) { // create entry for depth 1 with 0 energy
    
      UInt_t newId;
      if (abs(HcalDetId(i_it2->id()).ieta())==16)
    newId = HcalDetId(HcalBarrel, HcalDetId(i_it2->id()).ieta(), HcalDetId(i_it2->id()).iphi(), 1);
      else
    newId = HcalDetId(HcalDetId(i_it2->id()).subdet(), HcalDetId(i_it2->id()).ieta(), HcalDetId(i_it2->id()).iphi(), 1);
    
      selectCellsDepth1.push_back(TCell(newId, 0.0));
    }
  }
    
  for (vector<TCell>::iterator i_it = selectCellsDepth1.begin(); i_it != selectCellsDepth1.end(); ++i_it) {
    for (vector<TCell>::iterator i_it2 = selectCellsHighDepth.begin(); i_it2 != selectCellsHighDepth.end(); ++i_it2) {
      if (HcalDetId(i_it->id()).ieta()==HcalDetId(i_it2->id()).ieta() && 
      HcalDetId(i_it->id()).iphi()==HcalDetId(i_it2->id()).iphi()) {
    i_it->SetE(i_it->e()+i_it2->e());
    i_it2->SetE(0.0); // paranoid, aren't we...
      }
    }
  }
    
  // replace the original vectors with the new ones
  selectCells = selectCellsDepth1;
    
  return;
}

void sumSmallDepths

(

std::vector< TCell > &

selectCells

)

Definition at line 280 of file hcalCalibUtils.cc.

References spr::find().

                                                {
       
  if (selectCells.size()==0) return;
    
  vector<TCell> newCells; // holds unaffected cells to which the modified ones are added
  vector<TCell> manipulatedCells; // the ones that are combined
    
  for (vector<TCell>::iterator i_it = selectCells.begin(); i_it != selectCells.end(); ++i_it) {

    if ( (HcalDetId(i_it->id()).ietaAbs()==15 && HcalDetId(i_it->id()).depth()<=2) ||
     (HcalDetId(i_it->id()).ietaAbs()==16 && HcalDetId(i_it->id()).depth()<=2)) {
      manipulatedCells.push_back(*i_it);
    }
    else {
      newCells.push_back(*i_it);
    }

  }

  // if the list is empty there is nothing to manipulate
  // leave the original vector unchanged

  if (manipulatedCells.size()<1) {
    newCells.clear();    
    return;
  }


  // See what cells are needed to hold the combined information:
  // Make holders for depth=1 for each (iEta,iPhi) 
  // if a cell with these values is present in "manupulatedCells"  
  vector<UInt_t> dummyIds; // to keep track of kreated cells 
  vector<TCell> createdCells; // cells that need to be added or they exists;

  for (vector<TCell>::iterator i_it = manipulatedCells.begin(); i_it!=manipulatedCells.end(); ++i_it) {
    UInt_t dummyId = HcalDetId(HcalDetId(i_it->id()).subdet(), HcalDetId(i_it->id()).ieta(), HcalDetId(i_it->id()).iphi(), 1);
    if (find(dummyIds.begin(), dummyIds.end(), dummyId)==dummyIds.end()) {
      dummyIds.push_back(dummyId);
      createdCells.push_back(TCell(dummyId, 0.0));
    }
  }

  for (vector<TCell>::iterator i_it = createdCells.begin(); i_it!=createdCells.end(); ++i_it) {
    for (vector<TCell>::iterator i_it2 = manipulatedCells.begin(); i_it2!=manipulatedCells.end(); ++i_it2) {
      if (HcalDetId(i_it->id()).ieta()==HcalDetId(i_it2->id()).ieta() && 
      HcalDetId(i_it->id()).iphi()==HcalDetId(i_it2->id()).iphi() &&
      HcalDetId(i_it2->id()).depth()<=2) {
    i_it->SetE(i_it->e()+i_it2->e()); 
      }  
    }
  }
    
  for (vector<TCell>::iterator i_it = createdCells.begin(); i_it!=createdCells.end(); ++i_it) {
    newCells.push_back(*i_it);
  }
  
    
  // replace the original vectors with the new ones
  selectCells = newCells;
    
  return;
}