EcalSelectiveReadout Class Reference

#include <EcalSelectiveReadout.h>

Public Types
enum	towerInterest_t {   UNKNOWN = -1 & ~FORCED_MASK, LOWINTEREST = 0x0, SINGLE = 0x1, NEIGHBOUR = 0x2,   CENTER = 0x3, FORCED_LOWINTEREST = 0x4, FORCED_SINGLE = 0x5, FORCED_NEIGHBOUR = 0x6,   FORCED_CENTER = 0x7 }
enum	ttFlag_t {   TTF_UNKNOWN =-1, TTF_LOW_INTEREST = 0x0, TTF_MID_INTEREST = 0x1, TTF_HIGH_INTEREST = 0X3,   TTF_FORCED_LOW_INTEREST = 0x4, TTF_FORCED_MID_INTEREST = 0x5, TTF_FORCED_HIGH_INTEREST = 0x7 }

Public Member Functions
	EcalSelectiveReadout (int dEta=1, int dPhi=1)
towerInterest_t	getCrystalInterest (const EBDetId &ebDetId) const
towerInterest_t	getCrystalInterest (const EEDetId &eeDetId) const
towerInterest_t	getSuperCrystalInterest (const EcalScDetId &scDetId) const
towerInterest_t	getTowerInterest (const EcalTrigTowerDetId &towerId) const
void	print (std::ostream &os) const
	print out the map More...
void	printBarrel (std::ostream &os) const
void	printEndcap (int endcap, std::ostream &s) const
void	printHeader (std::ostream &os) const
	print out header for the map: see print(std::ostream&) More...
void	runSelectiveReadout0 (const ttFlag_t towerFlags[nTriggerTowersInEta][nTriggerTowersInPhi])
void	setElecMap (const EcalElectronicsMapping *map)
void	setTriggerMap (const EcalTrigTowerConstituentsMap *map)
	the mapping of which cell goes with which trigger tower More...

Static Public Attributes
static const int	FORCED_MASK = 0x4
static const int	maxDccChs = 68
static const size_t	nBarrelEtaBins = 170
static const size_t	nBarrelPhiBins = 360
static const size_t	nBarrelTowerEtaBins = nBarrelEtaBins/5
static const size_t	nBarrelTowerPhiBins = nBarrelPhiBins/5
static const size_t	nBarrelTriggerTowersInEta = 34
static const int	nDccPerEe = 9
static const size_t	nEndcaps = 2
static const size_t	nEndcapTriggerTowersInEta = 11
static const size_t	nEndcapXBins = 100
static const size_t	nEndcapYBins = 100
static const size_t	nSupercrystalXBins = nEndcapXBins/supercrystalEdge
static const size_t	nSupercrystalYBins = nEndcapYBins/supercrystalEdge
static const size_t	nTriggerTowersInEta
static const size_t	nTriggerTowersInPhi = 72
static const size_t	supercrystalEdge = 5
static const int	TTF_FORCED_RO_MASK = FORCED_MASK

Private Member Functions
void	classifyTriggerTowers (const ttFlag_t ttFlags[nTriggerTowersInEta][nTriggerTowersInPhi])
template<class T >
void	combineFlags (T &var, T val) const
towerInterest_t &	eeRuInterest (const EEDetId &id)
towerInterest_t &	eeRuInterest (const EcalScDetId &id)
void	printDccChMap (std::ostream &os) const
void	resetEeRuInterest ()
template<class T >
void	setHigher (T &var, T val) const
void	setLower (int &var, int val) const

Private Attributes
int	dEta
int	dPhi
towerInterest_t	eeRuInterest_ [nEndcaps][nDccPerEe][maxDccChs]
const EcalElectronicsMapping *	theElecMap
const EcalTrigTowerConstituentsMap *	theTriggerMap
towerInterest_t	towerInterest [nTriggerTowersInEta][nTriggerTowersInPhi]

Static Private Attributes
static const char	srpFlagMarker []

Detailed Description

This class is used to run the selective readout processing on the electromagnetic calorimeter. Normal user do not need to access directly this class: the selective readout is made at digitization by the CaloDataFrameFormatter class which uses the EcalSelectiveReadout class for this purpose: see CaloDataFrameFormatter class documentation. The ECAL event size must be reduced by a factor ~1/20th online at the LV1 rate. This reduction is achieved by suppressing channels whose energy, evaluated on line by a FIR, is below a threshold ("zero suppression"). This threshold is dynamic and determined for the channel of each readout unit. A readout unit is a group of 5x5 crystals: a trigger tower for the barrel and a supercrystal for the endcap) basis. The selective readout classifies the readout units in three classes:

• low interest
• single
• neighbour
• center

. Single, neighbour and center classes consitute the "high interest" readout units and their channels the "high interest" channels. Two zero suppresion thresholds, eventually -/+ infinity, are defined: one for the "Low interest" channels and one for the "high interest" channels. The low interest threshold must be higher than the high interest one.

Note: Forced bit processing:

The trigger tower flag (TTF) issued by the TCC and indicating the level of transverse deposited energy (classified is three levels called low interest, mid interest, high interest), the selective readout flags (SRF) are made of 2 bits. An additionnal bit, called force bit, is used to indicate if some information was missing to compute the flag and if therefore some default value was used. TCC can substitute a default value to a TTF. In such case the forced bit is set. Similarly SRP can substitute a default value to a SRF and set the forced bit accordingly. If the TTF forced bit of a trigger tower is set the SRP propagates it to the SRF by setting the forced bit of every readout unit overlapping with the trigger tower. Note that for the barrel readout units match with trigger towers.

Definition at line 64 of file EcalSelectiveReadout.h.

Member Enumeration Documentation

enum EcalSelectiveReadout::towerInterest_t

trigger tower classification ("SRP flags")

Enumerator
UNKNOWN
LOWINTEREST
SINGLE
NEIGHBOUR
CENTER
FORCED_LOWINTEREST
FORCED_SINGLE
FORCED_NEIGHBOUR
FORCED_CENTER

Definition at line 71 of file EcalSelectiveReadout.h.

               {UNKNOWN             = -1 & ~FORCED_MASK,
                LOWINTEREST         = 0x0,
                SINGLE              = 0x1,
                NEIGHBOUR           = 0x2,
                CENTER              = 0x3,
                FORCED_LOWINTEREST  = 0x4, //0x0 | 0x4
                FORCED_SINGLE       = 0x5, //0x1 | 0x4
                FORCED_NEIGHBOUR    = 0x6, //0x2 | 0x4
                FORCED_CENTER       = 0x7  //0x3 | 0x4
  } towerInterest_t;

enum EcalSelectiveReadout::ttFlag_t

Enumerator
TTF_UNKNOWN
TTF_LOW_INTEREST
TTF_MID_INTEREST
TTF_HIGH_INTEREST
TTF_FORCED_LOW_INTEREST
TTF_FORCED_MID_INTEREST
TTF_FORCED_HIGH_INTEREST

Definition at line 82 of file EcalSelectiveReadout.h.

               {
    TTF_UNKNOWN                     =-1,
    TTF_LOW_INTEREST                = 0x0,
    TTF_MID_INTEREST                = 0x1,
    /* 0x2 not used */
    TTF_HIGH_INTEREST               = 0X3,
    TTF_FORCED_LOW_INTEREST         = 0x4, //0x0 | 0x4
    TTF_FORCED_MID_INTEREST         = 0x5, //0x1 | 0x4
    /* 0x6 not used*/
    TTF_FORCED_HIGH_INTEREST        = 0x7  //0x3 | 0x4
//     TTF_FORCED_RO_LINK_SYNC_ERR = 0x4,
//     TTF_FORCED_RO_HAMMING_ERR = 0X5,
//     TTF_FORCED_RO_OTHER1 = 0X6,
//     TTF_FORCED_RO_OTHER2 = 0X7
  } ttFlag_t;

Constructor & Destructor Documentation

EcalSelectiveReadout::EcalSelectiveReadout	(	int	dEta = 1,
		int	dPhi = 1
	)

Constructs a ecalselectivereadout. Neighbours are taken in a trigger tower matrix of size 2(dEta+1))x2(dPhi+1) around a 'center' tower.

Parameters

dEta	neighborhood extend in number of trigger towers along eta
dPhi	neighborgooh extend in number if trigger towers along phi in 'low interest', 'single' or 'center. First element is the lower threshold, second element is the higher one.

Definition at line 21 of file EcalSelectiveReadout.cc.

                                                              :
  theTriggerMap(0), theElecMap(0), dEta(dEta_), dPhi(dPhi_) {
}

Member Function Documentation

void EcalSelectiveReadout::classifyTriggerTowers ( const ttFlag_t  ttFlags[nTriggerTowersInEta][nTriggerTowersInPhi] )

private

Classifies trigger tower in three classes:

• low interest: value 'lowInterest'
• middle interest: value 'single'
• high interest: value 'center'

Definition at line 215 of file EcalSelectiveReadout.cc.

References CENTER, combineFlags(), dEta, dPhi, FORCED_MASK, i, LOWINTEREST, max(), NEIGHBOUR, nTriggerTowersInEta, nTriggerTowersInPhi, SINGLE, towerInterest, TTF_HIGH_INTEREST, and TTF_MID_INTEREST.

Referenced by runSelectiveReadout0().

{
  //starts with a all low interest map:
  for(int iEta=0; iEta < (int)nTriggerTowersInEta; ++iEta){
    for(int iPhi=0; iPhi < (int)nTriggerTowersInPhi; ++iPhi){
      towerInterest[iEta][iPhi] = LOWINTEREST;
    }
  }

  for(int iEta=0; iEta < (int)nTriggerTowersInEta; ++iEta){
    for(int iPhi=0; iPhi < (int)nTriggerTowersInPhi; ++iPhi){
      //copy forced bit from ttFlags to towerInterests:
      towerInterest[iEta][iPhi] =  (towerInterest_t) (towerInterest[iEta][iPhi]
                                                      | (ttFlags[iEta][iPhi] & FORCED_MASK)) ;
      if((ttFlags[iEta][iPhi] & ~FORCED_MASK) == TTF_HIGH_INTEREST){
        //flags this tower as a center tower
        towerInterest[iEta][iPhi] = CENTER;
        //flags the neighbours of this tower
        for(int iEtaNeigh = std::max<int>(0,iEta-dEta);
            iEtaNeigh <= std::min<int>(nTriggerTowersInEta-1, iEta+dEta);
            ++iEtaNeigh){
          for(int iPhiNeigh = iPhi-dPhi;
              iPhiNeigh <= iPhi+dPhi;
              ++iPhiNeigh){
            //beware, iPhiNeigh must be moved to [0,72] interval
            //=> %nTriggerTowersInPhi required
            int iPhiNeigh_ = iPhiNeigh%(int)nTriggerTowersInPhi;
            if(iPhiNeigh_<0) {
              iPhiNeigh_ += nTriggerTowersInPhi;
            }
            combineFlags(towerInterest[iEtaNeigh][iPhiNeigh_],
                         NEIGHBOUR);
          }
        }
      } else if((ttFlags[iEta][iPhi] & ~FORCED_MASK) == TTF_MID_INTEREST){
        combineFlags(towerInterest[iEta][iPhi], SINGLE);
      }
    }
  }

  //dealing with pseudo-TT in the two innest eta-ring of the endcaps
  //=>choose the highest priority  SRF of the 2 pseudo-TT constituting
  //a TT. Note that for S and C, the 2 pseudo-TT must already have the
  //same mask.
  const size_t innerEtas[] = {0, 1,
                              nTriggerTowersInEta-2, nTriggerTowersInEta-1};
  for(size_t i=0; i < 4; ++i){
    size_t iEta = innerEtas[i];
    for(size_t iPhi = 0 ; iPhi < nTriggerTowersInPhi; iPhi+=2){
      const towerInterest_t srf = std::max(towerInterest[iEta][iPhi],
                                           towerInterest[iEta][iPhi+1]);
      towerInterest[iEta][iPhi] = srf;
      towerInterest[iEta][iPhi+1] = srf;
    }
  }
}

template<class T >

void EcalSelectiveReadout::combineFlags ( T &  var, T  val  ) const

inlineprivate

Combine two flags. Forced bit and actual flag fields are treated separately. For both fields, the highst value is selected.

Parameters

var	[in,out] flag to change in place
val	flag to combine with the first.

Template Parameters

T	towerInterest_t or

Definition at line 310 of file EcalSelectiveReadout.h.

References gather_cfg::cout, max(), and TTF_FORCED_RO_MASK.

Referenced by classifyTriggerTowers(), and runSelectiveReadout0().

                                        {
    var = (T)(std::max(val & ~TTF_FORCED_RO_MASK,  //actual flag value:
                       //                            take highest
                       var  & ~TTF_FORCED_RO_MASK) //beware: must work also
              //                                     for UNKNOW=-1
              //                                     ->compare the whole
              //                                     integer but with
              //                                     the forced bit masked.
              | ((val | var) & 0x4));//forced bit: set it if any of the two is
    //                                 already set
    
    
    if(var < 0 || var > 7){
      std::cout << __FILE__ << ":" << __LINE__ << ": ---------->"
           <<  var << " " << val << " "
           << std::max(val & 0x3, var  & 0x3) << " "
           << (val | var) << " "
           <<  ((val | var) & 0x4) << " "
           << (std::max(val & 0x3, var  & 0x3)
               | ((val | var) & 0x4)) <<  " "
           << (T)(std::max(val & 0x3, var  & 0x3)
                  | ((val | var) & 0x4)) << "\n";
        }
  }

EcalSelectiveReadout::towerInterest_t & EcalSelectiveReadout::eeRuInterest ( const EEDetId &  id )

private

Get access to eeRuInterest element corresponding to an EE det Id

Parameters

id	the EE det id

Returns

reference to the eeRuInterest array element

Definition at line 169 of file EcalSelectiveReadout.cc.

References eeRuInterest_, EcalElectronicsMapping::getElectronicsId(), maxDccChs, nDccPerEe, theElecMap, UNKNOWN, and EcalElectronicsId::zside().

Referenced by getCrystalInterest(), getSuperCrystalInterest(), and runSelectiveReadout0().

                                                        {
  const EcalElectronicsId& id = theElecMap->getElectronicsId(eeDetId);
  const int iZ0 = id.zside()>0 ? 1 : 0;
  const int iDcc0 = id.dccId()-1;
  const int iDccPhi0 = (iDcc0<9)?iDcc0:(iDcc0-45);
  const int iDccCh0 = id.towerId()-1;
  assert(0 <= iDccPhi0 && iDccPhi0 < nDccPerEe);
  assert(0 <= iDccCh0  && iDccCh0 < maxDccChs);

  assert(eeRuInterest_[iZ0][iDccPhi0][iDccCh0] == UNKNOWN
         || (0<= eeRuInterest_[iZ0][iDccPhi0][iDccCh0]
             && eeRuInterest_[iZ0][iDccPhi0][iDccCh0] <=7));
  
  return eeRuInterest_[iZ0][iDccPhi0][iDccCh0];
}

EcalSelectiveReadout::towerInterest_t & EcalSelectiveReadout::eeRuInterest ( const EcalScDetId &  id )

private

Get access to eeRuInterest element corresponding to an SC det Id

Parameters

id	the SC det id

Returns

reference to the eeRuInterest array element

Definition at line 186 of file EcalSelectiveReadout.cc.

References eeRuInterest_, EcalElectronicsMapping::getDCCandSC(), maxDccChs, nDccPerEe, theElecMap, and EcalScDetId::zside().

                                                            {
  std::pair<int, int> dccAndDccCh = theElecMap->getDCCandSC(scDetId);
  const int iZ0 = (scDetId.zside()>0) ? 1: 0;
  const int iDcc0 = dccAndDccCh.first-1;
  const int iDccPhi0 = (iDcc0<9)?iDcc0:(iDcc0-45);
  const int iDccCh0 = dccAndDccCh.second-1;
  assert(0 <= iDccPhi0 && iDccPhi0 <= nDccPerEe);
  assert(0 <= iDccCh0  && iDccCh0 <= maxDccChs);

  assert(-1<= eeRuInterest_[iZ0][iDccPhi0][iDccCh0] && eeRuInterest_[iZ0][iDccPhi0][iDccCh0] <=7);
  
  return eeRuInterest_[iZ0][iDccPhi0][iDccCh0];
}

EcalSelectiveReadout::towerInterest_t EcalSelectiveReadout::getCrystalInterest

(

const EBDetId &

ebDetId

)

const

Gets the SR interest classification of an EB channel

Parameters

ebDetId	id of the crystal
interest

Definition at line 145 of file EcalSelectiveReadout.cc.

References getTowerInterest(), theTriggerMap, and EcalTrigTowerConstituentsMap::towerOf().

{
  EcalTrigTowerDetId thisTower = theTriggerMap->towerOf(ebDetId);
  return getTowerInterest(thisTower);
}

EcalSelectiveReadout::towerInterest_t EcalSelectiveReadout::getCrystalInterest

(

const EEDetId &

eeDetId

)

const

Gets the SR interest classification of an EE channel

Parameters

eeDetId

id of the crystal

Returns

interest

Definition at line 153 of file EcalSelectiveReadout.cc.

References eeRuInterest().

{
  //   int iz = (eeDetId.zside() > 0) ? 1 : 0;
  //   int superCrystalX = (eeDetId.ix()-1) / 5;
  //   int superCrystalY = (eeDetId.iy()-1) / 5;
  //   return supercrystalInterest[iz][superCrystalX][superCrystalY];
  return const_cast<EcalSelectiveReadout*>(this)->eeRuInterest(eeDetId);
}

EcalSelectiveReadout::towerInterest_t EcalSelectiveReadout::getSuperCrystalInterest

(

const EcalScDetId &

scDetId

)

const

Gets the SR interest classification of an EE supercrystal

Parameters

scDetId

id of the crystal

Returns

interest

Definition at line 163 of file EcalSelectiveReadout.cc.

References eeRuInterest().

Referenced by printEndcap().

{
  return const_cast<EcalSelectiveReadout*>(this)->eeRuInterest(scDetId);
}

EcalSelectiveReadout::towerInterest_t EcalSelectiveReadout::getTowerInterest

(

const EcalTrigTowerDetId &

towerId

)

const

Gets the SR interest classification of a trigger tower (TT).

Parameters

iEta	index of the TT along eta
iPhi	index of the TT along phi

Returns

interest

Definition at line 202 of file EcalSelectiveReadout.cc.

References EcalTrigTowerDetId::ieta(), EcalTrigTowerDetId::iphi(), nTriggerTowersInEta, and towerInterest.

Referenced by getCrystalInterest(), and runSelectiveReadout0().

{
  // remember, array indices start at zero
  int iEta = tower.ieta()<0? tower.ieta() + nTriggerTowersInEta/2
    : tower.ieta() + nTriggerTowersInEta/2 -1;
  int iPhi = tower.iphi() - 1;

  assert(-1 <= towerInterest[iEta][iPhi] && towerInterest[iEta][iPhi] < 8);
  
  return towerInterest[iEta][iPhi];
}

void EcalSelectiveReadout::print

(

std::ostream &

os

)

const

print out the map

Definition at line 285 of file EcalSelectiveReadout.cc.

References printBarrel(), and printEndcap().

Referenced by operator<<().

{
  //EE-
  printEndcap(0, os);

  //EB
  printBarrel(os);

  //EE+
  printEndcap(1, os);
}

void EcalSelectiveReadout::printBarrel

(

std::ostream &

os

)

const

Definition at line 298 of file EcalSelectiveReadout.cc.

References nBarrelTriggerTowersInEta, nEndcapTriggerTowersInEta, nTriggerTowersInPhi, srpFlagMarker, and towerInterest.

Referenced by print().

{
  for(size_t iEta = nEndcapTriggerTowersInEta;
      iEta < nEndcapTriggerTowersInEta
        + nBarrelTriggerTowersInEta;
      ++iEta){
    for(size_t iPhi = 0; iPhi < nTriggerTowersInPhi; ++iPhi){
      towerInterest_t srFlag
        = towerInterest[iEta][iPhi];
      os << srpFlagMarker[srFlag];
    }
    os << "\n"; //one phi per line
  }
}

void EcalSelectiveReadout::printDccChMap ( std::ostream &  os ) const

private

Propagate TTF flag bit on towerInterest. TT interest forced bit is set if TTF forced bit is set, otherwise it is not touched.

Parameters

ttFlags

TT flags

Definition at line 343 of file EcalSelectiveReadout.cc.

References hitfit::char, Reference_intrackfit_cff::endcap, EcalElectronicsMapping::getDCCandSC(), i, nSupercrystalXBins, nSupercrystalYBins, theElecMap, and EcalScDetId::validDetId().

                                                       {
  for(int i=-1; i<=68; ++i){
    if((i+1)%10==0) os << "//";
    os << std::setw(2) << i << ": " << (char)('0'+i);
    if(i%10==9) os << "\n"; else os << " ";
  }
  
  os << "\n";
  
  for(int endcap = 0; endcap < 2; ++endcap){
    os << "Sc2DCCch0: " << (endcap?"EE+":"EE-") << "\n";
    for(size_t iY=0; iY<nSupercrystalYBins; ++iY){
      os << "Sc2DCCch0: ";
      for(size_t iX=0; iX<nSupercrystalXBins; ++iX){
        //if(iX) os << ",";
        if(!EcalScDetId::validDetId(iX+1,iY+1,endcap>=1?1:-1)){
          //os << std::setw(2) << -1;
          os << (char)('0'-1);
        } else{
          //os << std::setw(2) << theElecMap->getDCCandSC(EcalScDetId(iX+1, iY+1, endcap>0?1:-1)).second-1;
          os << (char)('0'+(theElecMap->getDCCandSC(EcalScDetId(iX+1, iY+1, endcap>0?1:-1)).second-1));
        }
      }
      os << "\n";
    }
    os << "\n";
  }
  os << "\n";
}

void EcalSelectiveReadout::printEndcap	(	int	endcap,
		std::ostream &	s
	)		const

Definition at line 314 of file EcalSelectiveReadout.cc.

References trackerHits::c, getSuperCrystalInterest(), nSupercrystalXBins, nSupercrystalYBins, srpFlagMarker, UNKNOWN, and EcalScDetId::validDetId().

Referenced by print().

{  
  for(size_t iX=0; iX<nSupercrystalXBins; ++iX){
    for(size_t iY=0; iY<nSupercrystalYBins; ++iY){
      towerInterest_t srFlag;
      char c;
      if(!EcalScDetId::validDetId(iX+1,iY+1,endcap>=1?1:-1)){
        //        srFlag = UNKNOWN;
        c = ' ';
      } else{
        srFlag
          = getSuperCrystalInterest(EcalScDetId(iX+1, iY+1, endcap>=1?1:-1));//supercrystalInterest[endcap][iX][iY];
        c = srFlag==UNKNOWN ? '?' : srpFlagMarker[srFlag];
      }
      os << c;
    }
    os << "\n"; //one Y supercystal column per line
  } //next supercrystal X-index
}

void EcalSelectiveReadout::printHeader

(

std::ostream &

os

)

const

print out header for the map: see print(std::ostream&)

Definition at line 272 of file EcalSelectiveReadout.cc.

References srpFlagMarker.

                                                           {
  os << "#SRP flag map\n#\n"
    "# +-->Phi/Y " << srpFlagMarker[0] << ": low interest\n"
    "# |         " << srpFlagMarker[1] << ": single\n"
    "# |         " << srpFlagMarker[2] << ": neighbour\n"
    "# V Eta/X   " << srpFlagMarker[3] << ": center\n"
    "#           " << srpFlagMarker[4] << ": forced low interest\n"
    "#           " << srpFlagMarker[5] << ": forced single\n"
    "#           " << srpFlagMarker[6] << ": forced neighbout\n"
    "#           " << srpFlagMarker[7] << ": forced center\n"
    "#\n";
}

void EcalSelectiveReadout::resetEeRuInterest ( )

private

Sets all endcap RU interest flags to 'unknown'

Definition at line 25 of file EcalSelectiveReadout.cc.

References eeRuInterest_, maxDccChs, nDccPerEe, nEndcaps, and UNKNOWN.

Referenced by runSelectiveReadout0().

                                            {
  //init superCrystalInterest (sets all elts to 'UNKNOWN'):
  for(size_t iCap=0; iCap < nEndcaps; ++iCap){
    for(int iDccPhi = 0; iDccPhi < nDccPerEe; ++iDccPhi){
      for(int iDccCh = 0; iDccCh < maxDccChs; ++iDccCh){
        eeRuInterest_[iCap][iDccPhi][iDccCh] = UNKNOWN;
      }
    }
  }
}

void EcalSelectiveReadout::runSelectiveReadout0

(

const ttFlag_t

towerFlags[nTriggerTowersInEta][nTriggerTowersInPhi]

)

Selective readout algorithm type 0. The algorithm is the following:

1. A trigger tower (TT) with Et higher than the high threshold is classified as 'center'
2. A trigger tower which is a neighbour of a 'center' TT and which is not itself a 'center' is classified as 'neighbour'
3. A TT with Et between the two threshold and which is not a 'center' or a 'neighbour' is classified as 'single'
4. Any other TT are classified as 'low interest'

For the barrel a crystal inherit the single/center/neighbour/low_interst classification of its TT. For the endcap,

• if the supercrystal overlaps with a 'center' TT, it's flagged as 'center'
• otherwise if it overlaps with a 'neighbour' TT, it's flagged as 'neighbour'
• else if it overlaps with a 'single' TT, it's flagged as 'single'
• the remaining SC are flagged as 'low interest'

An endcap crystal inherits the SRP flag of its SC.

Parameters

triggerTowerEt

array of the transverse enrgy deposited in the trigger tower. First index is for eta,2nd index for phi.

Definition at line 37 of file EcalSelectiveReadout.cc.

References CENTER, classifyTriggerTowers(), combineFlags(), DetId::Ecal, EcalEndcap, eeRuInterest(), FORCED_MASK, getTowerInterest(), LOWINTEREST, nBarrelTriggerTowersInEta, NEIGHBOUR, nEndcapTriggerTowersInEta, nEndcapXBins, nEndcapYBins, nTriggerTowersInEta, nTriggerTowersInPhi, DetId::rawId(), resetEeRuInterest(), SINGLE, theTriggerMap, towerInterest, EcalTrigTowerConstituentsMap::towerOf(), and EEDetId::validDetId().

                                                                                                           {

  //printDccChMap(std::cout);
  
  //classifies the trigger towers (single,center,neighbor,low interest)
  classifyTriggerTowers(ttFlags);
  
  //count number of TT in each interest class for debugging display
  int nTriggerTowerE[] = {0, 0, 0, 0, 0, 0, 0, 0};
  int nTriggerTowerB[] = {0, 0, 0, 0, 0, 0, 0, 0};
  static std::atomic<int> ncall{0};
  if(ncall < 10){
    ++ncall;
    for(size_t iPhi = 0; iPhi < nTriggerTowersInPhi; ++iPhi){
      for(size_t iEta = 0; iEta < nTriggerTowersInEta; ++iEta){
        if(iEta < nEndcapTriggerTowersInEta
           || iEta >= nBarrelTriggerTowersInEta + nEndcapTriggerTowersInEta){
          //in endcaps
          ++nTriggerTowerE[towerInterest[iEta][iPhi]];
        } else{//in barrel
          ++nTriggerTowerB[towerInterest[iEta][iPhi]];
        }

        assert(towerInterest[iEta][iPhi] >= 0
               && towerInterest[iEta][iPhi] <= 0x7);
      }
    }
    edm::LogInfo("EcalSelectiveReadout")
      << "without forced bit + with forced bit set:\n"
      << nTriggerTowerB[LOWINTEREST] << " + "
      << nTriggerTowerB[LOWINTEREST | FORCED_MASK]
      << " low interest TT(s) in barrel\n"
      << nTriggerTowerB[SINGLE]       << " + "
      << nTriggerTowerB[SINGLE | FORCED_MASK]
      << " single TT(s) in barrel\n"
      << nTriggerTowerB[NEIGHBOUR]   << " + "
      << nTriggerTowerB[NEIGHBOUR | FORCED_MASK]
      << " neighbor interest TT(s) in barrel\n"
      << nTriggerTowerB[CENTER]      << " + "
      << nTriggerTowerB[CENTER | FORCED_MASK]
      << " centre interest TT(s) in barrel\n"
      << nTriggerTowerE[LOWINTEREST] << " + "
      << nTriggerTowerE[LOWINTEREST | FORCED_MASK]
      << " low interest TT(s) in endcap\n"
      << nTriggerTowerE[SINGLE]      << " + "
      << nTriggerTowerE[SINGLE | FORCED_MASK]
      << " single TT(s) in endcap\n"
      << nTriggerTowerE[NEIGHBOUR]   << " + "
      << nTriggerTowerE[NEIGHBOUR | FORCED_MASK]
      << " neighbor TT(s) in endcap\n"
      << nTriggerTowerE[CENTER]      << " + "
      << nTriggerTowerE[CENTER | FORCED_MASK]
      << " center TT(s) in endcap\n";
  }
  //end TT interest class composition debugging display
  
  //For the endcap the TT classification must be mapped to the SC:  
  resetEeRuInterest();
  
#ifndef ECALSELECTIVEREADOUT_NOGEOM
  const std::vector<DetId>& endcapDetIds = theGeometry->getValidDetIds(DetId::Ecal, EcalEndcap);
  for(std::vector<DetId>::const_iterator eeDetIdItr = endcapDetIds.begin();
      eeDetIdItr != endcapDetIds.end(); ++eeDetIdItr){
    // for each superCrystal, the interest is the highest interest
    // of any trigger tower associated with at least one crystal from this SC.
    // The forced bit must be set if the flag of one of these trigger towers has
    // the forced bit set.
    EcalTrigTowerDetId trigTower = theTriggerMap->towerOf(*eeDetIdItr);
    assert(trigTower.rawId() != 0); 
    EEDetId eeDetId(*eeDetIdItr);
    int iz = (eeDetId.zside() > 0) ? 1 : 0;
    //Following statement will set properly the actual 2-bit flag value
    //and the forced bit: TTF forced bit is propagated to every RU that
    //overlaps with the corresponding TT.
    combineFlags(eeRuInterest(eeDetId), getTowerInterest(trigTower));
  }
#else //ECALSELECTIVEREADOUT_NOGEOM defined
  EEDetId xtal;
  for(int iZ0=0; iZ0<2; ++iZ0){//0->EE-, 1->EE+
    for(unsigned iX0=0; iX0<nEndcapXBins; ++iX0){
      for(unsigned iY0=0; iY0<nEndcapYBins; ++iY0){

        if (!(xtal.validDetId(iX0+1, iY0+1, (iZ0>0?1:-1)))){ 
          continue; 
        }
        xtal = EEDetId(iX0+1, iY0+1, (iZ0>0?1:-1));
        //works around a EEDetId bug. To remove once the bug fixed.
        if(39 <= iX0 && iX0 <= 60 && 45 <= iY0 && iY0 <= 54){
          continue;
        }
        // for each superCrystal, the interest is the highest interest
        // of any trigger tower associated with any crystal in this SC
        EcalTrigTowerDetId trigTower = theTriggerMap->towerOf(xtal);
        assert(trigTower.rawId() != 0); 
        //Following statement will set properly the actual 2-bit flag value
        //and the forced bit: TTF forced bit is propagated to every RU that
        //overlaps with the corresponding TT.
        combineFlags(eeRuInterest(xtal), getTowerInterest(trigTower));

        assert(0<= eeRuInterest(xtal)  && eeRuInterest(xtal) <= 0x7);
        
      } //next iY0
    } //next iX0
  } //next iZ0
#endif //ECALSELECTIVEREADOUT_NOGEOM not defined
}

void EcalSelectiveReadout::setElecMap ( const EcalElectronicsMapping *  map )

inline

the electronics map, used to get information about the DCC and DCC channel used to read a crystal channel

Definition at line 178 of file EcalSelectiveReadout.h.

References python.multivaluedict::map(), and theElecMap.

                                                      {
    theElecMap = map;
  }

template<class T >

void EcalSelectiveReadout::setHigher ( T &  var, T  val  ) const

inlineprivate

Changes the value of a variable iff that has the effect to increase the variable value var = max(var,val)

Parameters

var	the variable
val	the new candidate value

Definition at line 299 of file EcalSelectiveReadout.h.

                                     {
    if(val>var) var = val;
  }

void EcalSelectiveReadout::setLower ( int &  var, int  val  ) const

inlineprivate

Changes the value of a variable iff that has the effect to decrease the variable value var = min(var,val)

Parameters

var	the variable
val	the new candidate value

Definition at line 288 of file EcalSelectiveReadout.h.

                                        {
    if(val<var) var = val;
  }

void EcalSelectiveReadout::setTriggerMap ( const EcalTrigTowerConstituentsMap *  map )

inline

the mapping of which cell goes with which trigger tower

Definition at line 172 of file EcalSelectiveReadout.h.

References python.multivaluedict::map(), and theTriggerMap.

                                                               {
    theTriggerMap = map;
  }

Member Data Documentation

int EcalSelectiveReadout::dEta

private

Definition at line 356 of file EcalSelectiveReadout.h.

Referenced by classifyTriggerTowers().

int EcalSelectiveReadout::dPhi

private

Definition at line 357 of file EcalSelectiveReadout.h.

Referenced by classifyTriggerTowers().

towerInterest_t EcalSelectiveReadout::eeRuInterest_[nEndcaps][nDccPerEe][maxDccChs]

private

Definition at line 355 of file EcalSelectiveReadout.h.

Referenced by eeRuInterest(), and resetEeRuInterest().

const int EcalSelectiveReadout::FORCED_MASK = 0x4

static

Definition at line 66 of file EcalSelectiveReadout.h.

Referenced by classifyTriggerTowers(), EcalSelectiveReadoutSuppressor::initCellThresholds(), and runSelectiveReadout0().

const int EcalSelectiveReadout::maxDccChs = 68

static

Maximum number of DCC channels used from crystal channels (channel #69 and #70 used for MEM are not counted here)

Definition at line 151 of file EcalSelectiveReadout.h.

Referenced by eeRuInterest(), and resetEeRuInterest().

const size_t EcalSelectiveReadout::nBarrelEtaBins = 170

static

Number of crystals along eta in barrel

Definition at line 106 of file EcalSelectiveReadout.h.

const size_t EcalSelectiveReadout::nBarrelPhiBins = 360

static

Number of crystals in a eta ring of the barrel

Definition at line 109 of file EcalSelectiveReadout.h.

const size_t EcalSelectiveReadout::nBarrelTowerEtaBins = nBarrelEtaBins/5

static

Number of trigger tower along eta in the barrel

Definition at line 127 of file EcalSelectiveReadout.h.

const size_t EcalSelectiveReadout::nBarrelTowerPhiBins = nBarrelPhiBins/5

static

Number of trigger tower in a eta ring of the barrel

Definition at line 130 of file EcalSelectiveReadout.h.

const size_t EcalSelectiveReadout::nBarrelTriggerTowersInEta = 34

static

Number of barrel trigger towers along eta

Definition at line 139 of file EcalSelectiveReadout.h.

Referenced by printBarrel(), and runSelectiveReadout0().

const int EcalSelectiveReadout::nDccPerEe = 9

static

Number of DCC per endcap

Definition at line 155 of file EcalSelectiveReadout.h.

Referenced by eeRuInterest(), and resetEeRuInterest().

const size_t EcalSelectiveReadout::nEndcaps = 2

static

Number of endcap, obviously tow

Definition at line 133 of file EcalSelectiveReadout.h.

Referenced by resetEeRuInterest().

const size_t EcalSelectiveReadout::nEndcapTriggerTowersInEta = 11

static

Number of trigger towers along eta in one endcap

Definition at line 136 of file EcalSelectiveReadout.h.

Referenced by printBarrel(), and runSelectiveReadout0().

const size_t EcalSelectiveReadout::nEndcapXBins = 100

static

Range of the x-index of endcap crystals (xman-xmin+1).

Definition at line 112 of file EcalSelectiveReadout.h.

Referenced by runSelectiveReadout0().

const size_t EcalSelectiveReadout::nEndcapYBins = 100

static

Range of the y-index of endcap crystals (yman-ymin+1).

Definition at line 115 of file EcalSelectiveReadout.h.

Referenced by runSelectiveReadout0().

const size_t EcalSelectiveReadout::nSupercrystalXBins = nEndcapXBins/supercrystalEdge

static

Range of endcap supercrystal x-index (xmax-xmin+1)

Definition at line 121 of file EcalSelectiveReadout.h.

Referenced by printDccChMap(), and printEndcap().

const size_t EcalSelectiveReadout::nSupercrystalYBins = nEndcapYBins/supercrystalEdge

static

Range of endcap supercrystal y-index (ymay-ymin+1)

Definition at line 124 of file EcalSelectiveReadout.h.

Referenced by printDccChMap(), and printEndcap().

const size_t EcalSelectiveReadout::nTriggerTowersInEta

static

Initial value:

=
  2*nEndcapTriggerTowersInEta+nBarrelTriggerTowersInEta

Number of trigger towers along eta for the whole ECAL

Definition at line 142 of file EcalSelectiveReadout.h.

Referenced by classifyTriggerTowers(), getTowerInterest(), EcalSelectiveReadoutSuppressor::printTTFlags(), EcalSelectiveReadoutProducer::printTTFlags(), and runSelectiveReadout0().

const size_t EcalSelectiveReadout::nTriggerTowersInPhi = 72

static

Number of trigger towers in an eta ring

Definition at line 146 of file EcalSelectiveReadout.h.

Referenced by classifyTriggerTowers(), printBarrel(), EcalSelectiveReadoutSuppressor::printTTFlags(), EcalSelectiveReadoutProducer::printTTFlags(), and runSelectiveReadout0().

const char EcalSelectiveReadout::srpFlagMarker

staticprivate

Initial value:

= {'.', 'S', 'N', 'C',
                                                    '4', '5', '6', '7'}

Definition at line 360 of file EcalSelectiveReadout.h.

Referenced by printBarrel(), printEndcap(), and printHeader().

const size_t EcalSelectiveReadout::supercrystalEdge = 5

static

Edge size of a supercrystal. A supercrystal is a tower of 5x5 crystals.

Definition at line 118 of file EcalSelectiveReadout.h.

const EcalElectronicsMapping* EcalSelectiveReadout::theElecMap

private

Definition at line 348 of file EcalSelectiveReadout.h.

Referenced by eeRuInterest(), printDccChMap(), and setElecMap().

const EcalTrigTowerConstituentsMap* EcalSelectiveReadout::theTriggerMap

private

Definition at line 347 of file EcalSelectiveReadout.h.

Referenced by getCrystalInterest(), runSelectiveReadout0(), and setTriggerMap().

towerInterest_t EcalSelectiveReadout::towerInterest[nTriggerTowersInEta][nTriggerTowersInPhi]

private

Definition at line 353 of file EcalSelectiveReadout.h.

Referenced by classifyTriggerTowers(), getTowerInterest(), printBarrel(), and runSelectiveReadout0().

const int EcalSelectiveReadout::TTF_FORCED_RO_MASK = FORCED_MASK

static

Definition at line 99 of file EcalSelectiveReadout.h.

Referenced by combineFlags().