|
|
|
#include <DTOccupancyTest.h>
Public Member Functions | |
| DTOccupancyTest (const edm::ParameterSet &ps) | |
| Constructor. | |
| virtual | ~DTOccupancyTest () |
| Destructor. | |
Protected Member Functions | |
| void | analyze (const edm::Event &event, const edm::EventSetup &context) |
| Analyze. | |
| void | beginJob () |
| BeginJob. | |
| void | beginLuminosityBlock (edm::LuminosityBlock const &lumiSeg, edm::EventSetup const &context) |
| void | beginRun (edm::Run const &run, edm::EventSetup const &context) |
| BeginRun. | |
| void | endJob () |
| Endjob. | |
| void | endLuminosityBlock (edm::LuminosityBlock const &lumiSeg, edm::EventSetup const &context) |
| DQM Client Diagnostic. | |
Private Member Functions | |
| void | bookHistos (const int wheelId, std::string folder, std::string histoTag) |
| book the summary histograms | |
| std::string | getMEName (std::string histoTag, const DTChamberId &chId) |
| Get the ME name. | |
| int | runOccupancyTest (TH2F *histo, const DTChamberId &chId, float &chamberPercentage) |
| std::string | topFolder () const |
Private Attributes | |
| DQMStore * | dbe |
| MonitorElement * | glbSummaryHisto |
| int | lsCounter |
| std::set< DTLayerId > | monitoredLayers |
| edm::ESHandle< DTGeometry > | muonGeom |
| std::string | nameMonitoredHisto |
| int | nevents |
| int | nMinEvts |
| TNtuple * | ntuple |
| TFile * | rootFile |
| bool | runOnAllHitsOccupancies |
| bool | runOnInTimeOccupancies |
| bool | runOnNoiseOccupancies |
| MonitorElement * | summaryHisto |
| bool | tpMode |
| std::map< int, MonitorElement * > | wheelHistos |
| bool | writeRootFile |
* DQM Test Client
Definition at line 35 of file DTOccupancyTest.h.
| DTOccupancyTest::DTOccupancyTest | ( | const edm::ParameterSet & | ps | ) |
Constructor.
Definition at line 33 of file DTOccupancyTest.cc.
References edm::ParameterSet::getUntrackedParameter(), and cppFunctionSkipper::operator.
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest]: Constructor";
// Get the DQM service
dbe = Service<DQMStore>().operator->();
lsCounter = 0;
writeRootFile = ps.getUntrackedParameter<bool>("writeRootFile", false);
if(writeRootFile) {
rootFile = new TFile("DTOccupancyTest.root","RECREATE");
ntuple = new TNtuple("OccupancyNtuple", "OccupancyNtuple", "ls:wh:st:se:lay1MeanCell:lay1RMS:lay2MeanCell:lay2RMS:lay3MeanCell:lay3RMS:lay4MeanCell:lay4RMS:lay5MeanCell:lay5RMS:lay6MeanCell:lay6RMS:lay7MeanCell:lay7RMS:lay8MeanCell:lay8RMS:lay9MeanCell:lay9RMS:lay10MeanCell:lay10RMS:lay11MeanCell:lay11RMS:lay12MeanCell:lay12RMS");
}
// switch on the mode for running on test pulses (different top folder)
tpMode = ps.getUntrackedParameter<bool>("testPulseMode", false);
runOnAllHitsOccupancies = ps.getUntrackedParameter<bool>("runOnAllHitsOccupancies", true);
runOnNoiseOccupancies = ps.getUntrackedParameter<bool>("runOnNoiseOccupancies", false);
runOnInTimeOccupancies = ps.getUntrackedParameter<bool>("runOnInTimeOccupancies", false);
nMinEvts = ps.getUntrackedParameter<int>("nEventsCert", 5000);
}
| DTOccupancyTest::~DTOccupancyTest | ( | ) | [virtual] |
Destructor.
Definition at line 60 of file DTOccupancyTest.cc.
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << " destructor called" << endl;
}
| void DTOccupancyTest::analyze | ( | const edm::Event & | event, |
| const edm::EventSetup & | context | ||
| ) | [protected, virtual] |
Analyze.
Implements edm::EDAnalyzer.
Definition at line 132 of file DTOccupancyTest.cc.
References nevents.
{
nevents++;
// if(nevents%1000)
// LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest]: "<<nevents<<" events";
}
| void DTOccupancyTest::beginJob | ( | void | ) | [protected, virtual] |
BeginJob.
Reimplemented from edm::EDAnalyzer.
Definition at line 69 of file DTOccupancyTest.cc.
References bookHistos(), nevents, and indexGen::title.
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest]: BeginJob";
// Event counter
nevents = 0;
// Book the summary histos
// - one summary per wheel
for(int wh = -2; wh <= 2; ++wh) { // loop over wheels
bookHistos(wh, string("Occupancies"), "OccupancySummary");
}
dbe->setCurrentFolder(topFolder());
string title = "Occupancy Summary";
if(tpMode) {
title = "Test Pulse Occupancy Summary";
}
// - global summary with alarms
summaryHisto = dbe->book2D("OccupancySummary",title.c_str(),12,1,13,5,-2,3);
summaryHisto->setAxisTitle("sector",1);
summaryHisto->setAxisTitle("wheel",2);
// - global summary with percentages
glbSummaryHisto = dbe->book2D("OccupancyGlbSummary",title.c_str(),12,1,13,5,-2,3);
glbSummaryHisto->setAxisTitle("sector",1);
glbSummaryHisto->setAxisTitle("wheel",2);
// assign the name of the input histogram
if(runOnAllHitsOccupancies) {
nameMonitoredHisto = "OccupancyAllHits_perCh";
} else if(runOnNoiseOccupancies) {
nameMonitoredHisto = "OccupancyNoise_perCh";
} else if(runOnInTimeOccupancies) {
nameMonitoredHisto = "OccupancyInTimeHits_perCh";
} else { // default is AllHits histo
nameMonitoredHisto = "OccupancyAllHits_perCh";
}
}
| void DTOccupancyTest::beginLuminosityBlock | ( | edm::LuminosityBlock const & | lumiSeg, |
| edm::EventSetup const & | context | ||
| ) | [protected, virtual] |
Reimplemented from edm::EDAnalyzer.
Definition at line 125 of file DTOccupancyTest.cc.
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") <<"[DTOccupancyTest]: Begin of LS transition";
}
| void DTOccupancyTest::beginRun | ( | edm::Run const & | run, |
| edm::EventSetup const & | context | ||
| ) | [protected, virtual] |
BeginRun.
Reimplemented from edm::EDAnalyzer.
Definition at line 113 of file DTOccupancyTest.cc.
References edm::EventSetup::get().
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest]: BeginRun";
// Get the geometry
context.get<MuonGeometryRecord>().get(muonGeom);
}
| void DTOccupancyTest::bookHistos | ( | const int | wheelId, |
| std::string | folder, | ||
| std::string | histoTag | ||
| ) | [private] |
book the summary histograms
| void DTOccupancyTest::endJob | ( | void | ) | [protected, virtual] |
Endjob.
Reimplemented from edm::EDAnalyzer.
Definition at line 222 of file DTOccupancyTest.cc.
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest] endjob called!";
if(writeRootFile) {
rootFile->cd();
ntuple->Write();
rootFile->Close();
}
}
| void DTOccupancyTest::endLuminosityBlock | ( | edm::LuminosityBlock const & | lumiSeg, |
| edm::EventSetup const & | context | ||
| ) | [protected, virtual] |
DQM Client Diagnostic.
Reimplemented from edm::EDAnalyzer.
Definition at line 141 of file DTOccupancyTest.cc.
References chambers, MonitorElement::getFloatValue(), MonitorElement::getTH2F(), timingPdfMaker::histo, query::result, DTChamberId::sector(), DTChamberId::station(), and DTChamberId::wheel().
{
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest")
<<"[DTOccupancyTest]: End of LS transition, performing the DQM client operation";
lsCounter++;
// Reset the global summary
summaryHisto->Reset();
glbSummaryHisto->Reset();
// Get all the DT chambers
vector<DTChamber*> chambers = muonGeom->chambers();
for(vector<DTChamber*>::const_iterator chamber = chambers.begin();
chamber != chambers.end(); ++chamber) { // Loop over all chambers
DTChamberId chId = (*chamber)->id();
MonitorElement * chamberOccupancyHisto = dbe->get(getMEName(nameMonitoredHisto, chId));
// Run the tests on the plot for the various granularities
if(chamberOccupancyHisto != 0) {
// Get the 2D histo
TH2F* histo = chamberOccupancyHisto->getTH2F();
float chamberPercentage = 1.;
int result = runOccupancyTest(histo, chId, chamberPercentage);
int sector = chId.sector();
if(sector == 13) {
sector = 4;
float resultSect4 = wheelHistos[chId.wheel()]->getBinContent(sector, chId.station());
if(resultSect4 > result) {
result = (int)resultSect4;
}
} else if(sector == 14) {
sector = 10;
float resultSect10 = wheelHistos[chId.wheel()]->getBinContent(sector, chId.station());
if(resultSect10 > result) {
result = (int)resultSect10;
}
}
// the 2 MB4 of Sect 4 and 10 count as half a chamber
if((sector == 4 || sector == 10) && chId.station() == 4)
chamberPercentage = chamberPercentage/2.;
wheelHistos[chId.wheel()]->setBinContent(sector, chId.station(),result);
if(result > summaryHisto->getBinContent(sector, chId.wheel()+3)) {
summaryHisto->setBinContent(sector, chId.wheel()+3, result);
}
glbSummaryHisto->Fill(sector, chId.wheel(), chamberPercentage*1./4.);
} else {
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest] ME: "
<< getMEName(nameMonitoredHisto, chId) << " not found!" << endl;
}
}
string nEvtsName = "DT/EventInfo/Counters/nProcessedEventsDigi";
MonitorElement * meProcEvts = dbe->get(nEvtsName);
if (meProcEvts) {
int nProcEvts = meProcEvts->getFloatValue();
glbSummaryHisto->setEntries(nProcEvts < nMinEvts ? 10. : nProcEvts);
summaryHisto->setEntries(nProcEvts < nMinEvts ? 10. : nProcEvts);
} else {
glbSummaryHisto->setEntries(nMinEvts +1);
summaryHisto->setEntries(nMinEvts + 1);
LogVerbatim ("DTDQM|DTMonitorClient|DTOccupancyTest") << "[DTOccupancyTest] ME: "
<< nEvtsName << " not found!" << endl;
}
// Fill the global summary
// Check for entire sectors off and report them on the global summary
//FIXME: TODO
if(writeRootFile) ntuple->AutoSave("SaveSelf");
}
| std::string DTOccupancyTest::getMEName | ( | std::string | histoTag, |
| const DTChamberId & | chId | ||
| ) | [private] |
Get the ME name.
| int DTOccupancyTest::runOccupancyTest | ( | TH2F * | histo, |
| const DTChamberId & | chId, | ||
| float & | chamberPercentage | ||
| ) | [private] |
Definition at line 299 of file DTOccupancyTest.cc.
References DTOccupancyClusterBuilder::addPoint(), DTOccupancyCluster::averageMean(), DTOccupancyCluster::averageRMS(), DTOccupancyClusterBuilder::buildClusters(), DTOccupancyClusterBuilder::getBestCluster(), getHLTprescales::index, DTOccupancyClusterBuilder::isProblematic(), LogTrace, point, plotscripts::rms(), DTChamberId::sector(), mathSSE::sqrt(), DTChamberId::station(), makeHLTPrescaleTable::values, and DTChamberId::wheel().
{
int nBinsX = histo->GetNbinsX();
// Reset the error flags
bool failSL = false;
bool failLayer = false;
bool failCells = false;
// Check that the chamber has digis
if(histo->Integral() == 0) {
chamberPercentage = 0;
return 4;
}
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << "--- Occupancy test for chamber: " << chId << endl;
// set the # of SLs
int nSL = 3;
if(chId.station() == 4) nSL = 2;
//
float values[28];
if(writeRootFile) {
values[0] = lsCounter;
values[1] = chId.wheel();
values[2] = chId.station();
values[3] = chId.sector();
}
// Compute the average occupancy per layer and its RMS
// we also look of the layer with the smallest RMS in order to find a reference value
// for the cell occupancy
double totalChamberOccupp = 0;
double squaredLayerOccupSum = 0;
map<DTLayerId, pair<double, double> > averageCellOccupAndRMS;
map<DTLayerId, double> layerOccupancyMap;
int index = 3;
for(int slay = 1; slay <= 3; ++slay) { // loop over SLs
// Skip layer 2 on MB4
if(chId.station() == 4 && slay == 2) {
if(writeRootFile) {
values[12] = -1;
values[13] = -1;
values[14] = -1;
values[15] = -1;
values[16] = -1;
values[17] = -1;
values[18] = -1;
values[19] = -1;
}
index = 19;
continue;
}
// check the SL occupancy
int binYlow = ((slay-1)*4)+1;
int binYhigh = binYlow+3;
double slInteg = histo->Integral(1,nBinsX,binYlow,binYhigh);
if(slInteg == 0) {
chamberPercentage = 1.-1./(float)nSL;
return 3;
}
for(int lay = 1; lay <= 4; ++lay) { // loop over layers
DTLayerId layID(chId,slay,lay);
int binY = binYlow+(lay-1);
double layerInteg = histo->Integral(1,nBinsX,binY,binY);
squaredLayerOccupSum += layerInteg*layerInteg;
totalChamberOccupp+= layerInteg;
layerOccupancyMap[layID] = layerInteg;
// We look for the distribution of hits within the layer
int nWires = muonGeom->layer(layID)->specificTopology().channels();
int firstWire = muonGeom->layer(layID)->specificTopology().firstChannel();
double layerSquaredSum = 0;
// reset the alert bit in the plot (used by render plugins)
histo->SetBinContent(nBinsX+1,binY,0.);
for(int cell = firstWire; cell != (nWires+firstWire); ++cell) { // loop over cells
double cellOccup = histo->GetBinContent(cell,binY);
layerSquaredSum+=cellOccup*cellOccup;
}
// compute the average cell occpuancy and RMS
double averageCellOccup = layerInteg/nWires;
double averageSquaredCellOccup = layerSquaredSum/nWires;
double rmsCellOccup = sqrt(averageSquaredCellOccup - averageCellOccup*averageCellOccup);
averageCellOccupAndRMS[layID] = make_pair(averageCellOccup, rmsCellOccup);
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " " << layID
<< " average cell occ.: " << averageCellOccup
<< " RMS: " << rmsCellOccup << endl;
if(writeRootFile) {
index++;
values[index] = averageCellOccup;
index++;
values[index] = rmsCellOccup;
}
}
}
if(writeRootFile) ntuple->Fill(values);
// double averageLayerOcc = totalChamberOccupp/(nSL*4);
// double averageSquaredLayeroccup = squaredLayerOccupSum/(nSL*4);
// double layerOccupRMS = sqrt(averageSquaredLayeroccup - averageLayerOcc*averageLayerOcc);
double minCellRMS = 99999999;
double referenceCellOccup = -1;
DTOccupancyClusterBuilder builder;
// find the cell reference value
for(map<DTLayerId, pair<double, double> >::const_iterator layAndValues = averageCellOccupAndRMS.begin();
layAndValues != averageCellOccupAndRMS.end(); layAndValues++) {
DTLayerId lid = (*layAndValues).first;
double rms = (*layAndValues).second.second;
double lOcc = layerOccupancyMap[lid]; // FIXME: useless
double avCellOcc = (*layAndValues).second.first;
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " " << lid << " tot. occ: " << lOcc
<< " average cell occ: " << avCellOcc
<< " RMS: " << rms << endl;
if(avCellOcc != 0) {
DTOccupancyPoint point(avCellOcc, rms, lid);
builder.addPoint(point);
} else {
if(monitoredLayers.find(lid) == monitoredLayers.end()) monitoredLayers.insert(lid);
}
}
builder.buildClusters();
referenceCellOccup = builder.getBestCluster().averageMean();
minCellRMS = builder.getBestCluster().averageRMS();
// set<DTLayerId> bestLayers getLayerIDs()
double safeFactor = 3.;
// if(minCellRMS > referenceCellOccup) safeFactor = 5;
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " Reference cell occup.: " << referenceCellOccup
<< " RMS: " << minCellRMS << endl;
// Set a warning for particularly high RMS: noise can "mask" dead channels
// bool rmsWarning = false;
// if(layerOccupRMS > averageLayerOcc) {
// cout << " Warning RMS is too big: monitoring all layers" << endl;
// rmsWarning = true;
// }
int nFailingSLs = 0;
// Check the layer occupancy
for(int slay = 1; slay <= 3; ++slay) { // loop over SLs
// Skip layer 2 on MB4
if(chId.station() == 4 && slay == 2) continue;
int binYlow = ((slay-1)*4)+1;
// int binYhigh = binYlow+3;
int nFailingLayers = 0;
for(int lay = 1; lay <= 4; ++lay) { // loop over layers
DTLayerId layID(chId,slay,lay);
int nWires = muonGeom->layer(layID)->specificTopology().channels();
int firstWire = muonGeom->layer(layID)->specificTopology().firstChannel();
int binY = binYlow+(lay-1);
// compute the integral of the layer occupancy
double layerInteg = histo->Integral(1,nBinsX,binY,binY);
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " layer: " << layID << " integral: " << layerInteg << endl;
// Check if in the list of layers which are monitored
bool alreadyMonitored = false;
if(monitoredLayers.find(layID) != monitoredLayers.end()) alreadyMonitored = true;
if(layerInteg == 0) { // layer is dead (no need to go further
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " fail layer: no entries" << endl;
// Add it to the list of of monitored layers
if(!alreadyMonitored) monitoredLayers.insert(layID);
nFailingLayers++;
failLayer = true;
histo->SetBinContent(nBinsX+1,binY,-1.);
// go to next layer
continue;
}
// double avCellOccInLayer = averageCellOccupAndRMS[layID].first;
// double cellOccupRMS = averageCellOccupAndRMS[layID].second;
// if(monitoredLayers.find(layID) != monitoredLayers.end() ||
// layerInteg == 0 ||
// layerInteg < (averageLayerOcc - 3*layerOccupRMS) ||
// cellOccupRMS > avCellOccInLayer ||
// avCellOccInLayer < referenceCellOccup/3.) { // check the layer
if(alreadyMonitored || builder.isProblematic(layID)) { // check the layer
// Add it to the list of of monitored layers
if(monitoredLayers.find(layID) == monitoredLayers.end()) monitoredLayers.insert(layID);
// if(layerInteg != 0) { // check # of dead cells
int totalDeadCells = 0;
int nDeadCellsInARow = 1;
int nDeadCellsInARowMax = 0;
int nCellsZeroCount = 0;
bool previousIsDead = false;
int interDeadCells = 0;
for(int cell = firstWire; cell != (nWires+firstWire); ++cell) { // loop over cells
double cellOccup = histo->GetBinContent(cell,binY);
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " cell occup: " << cellOccup;
if(cellOccup == 0 || cellOccup < (referenceCellOccup-safeFactor*sqrt(referenceCellOccup))) {
if(cellOccup == 0) nCellsZeroCount++;
totalDeadCells++;
if(previousIsDead) nDeadCellsInARow++;
previousIsDead = true;
interDeadCells = 0;
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " below reference" << endl;
} else {
previousIsDead = false;
interDeadCells++;
// 3 cells not dead between a group of dead cells don't break the count
if(interDeadCells > 3) {
if(nDeadCellsInARow > nDeadCellsInARowMax) nDeadCellsInARowMax = nDeadCellsInARow;
nDeadCellsInARow = 1;
}
}
}
if(nDeadCellsInARow > nDeadCellsInARowMax) nDeadCellsInARowMax = nDeadCellsInARow;
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " # wires: " << nWires
<< " # cells 0 count: " << nCellsZeroCount
<< " # dead cells in a row: " << nDeadCellsInARowMax
<< " total # of dead cells: " << totalDeadCells;
// Count dead cells
// if(TMath::Erf(referenceCellOccup/sqrt(referenceCellOccup)) > 2./3. &&
// nDeadCellsInARowMax > nWires/3.
// && nDeadCellsInARowMax < 2*nWires/3.) {
// cout << " -> fail cells!" << endl;
// failCells = true;
// histo->SetBinContent(nBinsX+1,binY,-1.);
// } else
if((TMath::Erfc(referenceCellOccup/sqrt(referenceCellOccup)) < 10./(double)nWires &&
nDeadCellsInARowMax>= 10.) ||
(TMath::Erfc(referenceCellOccup/sqrt(referenceCellOccup)) < 0.5 &&
totalDeadCells > nWires/2.)) {
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " -> fail layer!" << endl;
nFailingLayers++;
failLayer = true;
histo->SetBinContent(nBinsX+1,binY,-1.);
} else if(referenceCellOccup > 10 &&
nCellsZeroCount > nWires/3. &&
(double)nCellsZeroCount/(double)nWires >
2.*TMath::Erfc(referenceCellOccup/sqrt(referenceCellOccup))) {
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " -> would fail cells!" << endl;
LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " # of cells with 0 count: " << nCellsZeroCount
<< " # wires: " << nWires
<< " erfc: "
<< TMath::Erfc(referenceCellOccup/sqrt(referenceCellOccup))
<< endl;
// failCells = true;
// histo->SetBinContent(nBinsX+1,binY,-1.);
}
// } else { // all layer is dead
// LogTrace("DTDQM|DTMonitorClient|DTOccupancyTest") << " fail layer: no entries" << endl;
// nFailingLayers++;
// failLayer = true;
// histo->SetBinContent(nBinsX+1,binY,-1.);
// }
}
}
// Check if the whole layer is off
if( nFailingLayers == 4) {
nFailingSLs++;
failSL = true;
}
}
// All the chamber is off
if(nFailingSLs == nSL) {
chamberPercentage = 0;
return 4;
} else {
chamberPercentage = 1.-(float)nFailingSLs/(float)nSL;
}
// FIXME add check on cells
if(failSL) return 3;
if(failLayer) return 2;
if(failCells) return 1;
return 0;
}
| string DTOccupancyTest::topFolder | ( | ) | const [private] |
Definition at line 610 of file DTOccupancyTest.cc.
References AlCaHLTBitMon_QueryRunRegistry::string.
DQMStore* DTOccupancyTest::dbe [private] |
Definition at line 80 of file DTOccupancyTest.h.
MonitorElement* DTOccupancyTest::glbSummaryHisto [private] |
Definition at line 87 of file DTOccupancyTest.h.
int DTOccupancyTest::lsCounter [private] |
Definition at line 91 of file DTOccupancyTest.h.
std::set<DTLayerId> DTOccupancyTest::monitoredLayers [private] |
Definition at line 89 of file DTOccupancyTest.h.
edm::ESHandle<DTGeometry> DTOccupancyTest::muonGeom [private] |
Definition at line 82 of file DTOccupancyTest.h.
std::string DTOccupancyTest::nameMonitoredHisto [private] |
Definition at line 102 of file DTOccupancyTest.h.
int DTOccupancyTest::nevents [private] |
Definition at line 78 of file DTOccupancyTest.h.
int DTOccupancyTest::nMinEvts [private] |
Definition at line 92 of file DTOccupancyTest.h.
TNtuple* DTOccupancyTest::ntuple [private] |
Definition at line 96 of file DTOccupancyTest.h.
TFile* DTOccupancyTest::rootFile [private] |
Definition at line 95 of file DTOccupancyTest.h.
bool DTOccupancyTest::runOnAllHitsOccupancies [private] |
Definition at line 99 of file DTOccupancyTest.h.
bool DTOccupancyTest::runOnInTimeOccupancies [private] |
Definition at line 101 of file DTOccupancyTest.h.
bool DTOccupancyTest::runOnNoiseOccupancies [private] |
Definition at line 100 of file DTOccupancyTest.h.
MonitorElement* DTOccupancyTest::summaryHisto [private] |
Definition at line 86 of file DTOccupancyTest.h.
bool DTOccupancyTest::tpMode [private] |
Definition at line 97 of file DTOccupancyTest.h.
std::map< int, MonitorElement* > DTOccupancyTest::wheelHistos [private] |
Definition at line 85 of file DTOccupancyTest.h.
bool DTOccupancyTest::writeRootFile [private] |
Definition at line 94 of file DTOccupancyTest.h.
1.7.3