ECAL TB 2006 calibration with matrix inversion technique. More...

#include <EcalEleCalibLooper.h>

Inheritance diagram for EcalEleCalibLooper:

Public Member Functions
void	beginOfJob ()
	BeginOfJob.
Status	duringLoop (const edm::Event &, const edm::EventSetup &)
	EcalEleCalibLooper (const edm::ParameterSet &)
	ctor
void	endOfJob ()
Status	endOfLoop (const edm::EventSetup &, unsigned int iCounter)
void	startingNewLoop (unsigned int)
	~EcalEleCalibLooper ()
	dtor
Private Member Functions
int	EBregionCheck (const int eta, const int phi) const
	Tells if you are in the region to be calibrated.
void	EBRegionDefinition ()
	DS EB Region Definition.
int	EBRegionId (const int, const int) const
	Reg Id generator EB ----- for the barrel.
int	EBregionsNum () const
	DS number of regions in EB.
int	EEregionCheck (const int, const int) const
	returns zero if the coordinates are in the right place.
void	EERegionDefinition ()
int	EERegionId (const int, const int) const
	Gives the id of the region.
int	EEregionsNum () const
	DS Number of regions in EE.
int	etaShifter (const int) const
	LP Change the coordinate system.
double	giveLimit (int)
	copes with the infinitives of the tangent
Private Attributes
bool	isfirstcall_
edm::InputTag	m_barrelAlCa
	EcalBarrel Input Collection name.
std::vector< DetId >	m_barrelCells
EcalIntercalibConstantMap	m_barrelMap
	the maps of recalib coeffs
std::vector< VEcalCalibBlock * >	m_EcalCalibBlocks
	single blocks calibrators
edm::InputTag	m_ElectronLabel
	To take the electrons.
edm::InputTag	m_endcapAlCa
	EcalEndcap Input Collection name.
std::vector< DetId >	m_endcapCells
EcalIntercalibConstantMap	m_endcapMap
int	m_etaEnd
	eta end of the region of interest
int	m_etaStart
	phi size of the additive border to the sub-matrix
int	m_etaWidth
	eta size of the sub-matrix
unsigned int	m_loops
	DS sets the number of loops to do.
VFillMap *	m_MapFiller
double	m_maxCoeff
	maximum coefficient accepted (RAW)
double	m_maxEnergyPerCrystal
	maximum energy per crystal cut
int	m_maxSelectedNumPerXtal
	maximum number of events per crystal
double	m_minCoeff
	minimum coefficient accepted (RAW)
double	m_minEnergyPerCrystal
	minimum energy per crystal cut
int	m_phiEndEB
	phi end of the region of interest
int	m_phiEndEE
int	m_phiStartEB
	phi start of the region of interest
int	m_phiStartEE
int	m_phiWidthEB
	eta size of the additive border to the sub-matrix
int	m_phiWidthEE
int	m_radEnd
int	m_radStart
	DS For the EE.
int	m_radWidth
int	m_recoWindowSidex
	reconstruction window size
int	m_recoWindowSidey
std::vector< int >	m_regions
int	m_usingBlockSolver
	to exclude the blocksolver
std::map< int, int >	m_xtalNumOfHits
std::map< int, int >	m_xtalPositionInRegion
std::map< int, int >	m_xtalRegionId

Detailed Description

ECAL TB 2006 calibration with matrix inversion technique.

Date:: 2010/01/18 21:31:47

Revision:: 1.5

Author:

Definition at line 34 of file EcalEleCalibLooper.h.

Constructor & Destructor Documentation

EcalEleCalibLooper::EcalEleCalibLooper ( const edm::ParameterSet & iConfig ) [explicit]

ctor

LP ctor.

Graphs to ckeck the region definition

End of Graphs

Definition at line 36 of file EcalEleCalibLooper.cc.

References algorithm(), EBRegionDefinition(), EBregionsNum(), EERegionDefinition(), EEregionsNum(), eta(), cmsRelvalreport::exit, edm::ParameterSet::getParameter(), edm::ParameterSet::getUntrackedParameter(), m_barrelMap, m_EcalCalibBlocks, m_endcapMap, m_etaEnd, m_etaStart, m_etaWidth, m_MapFiller, m_maxEnergyPerCrystal, m_minEnergyPerCrystal, m_radEnd, m_radStart, m_radWidth, m_recoWindowSidex, m_recoWindowSidey, m_regions, m_xtalPositionInRegion, m_xtalRegionId, dbtoconf::out, phi, AlCaHLTBitMon_QueryRunRegistry::string, EBDetId::unhashIndex(), EEDetId::validDetId(), x, and detailsBasic3DVector::y.

                                                                      :
      m_barrelAlCa (iConfig.getParameter<edm::InputTag> ("alcaBarrelHitCollection")) ,
      m_endcapAlCa (iConfig.getParameter<edm::InputTag> ("alcaEndcapHitCollection")) ,
      m_recoWindowSidex (iConfig.getParameter<int> ("recoWindowSidex")) ,
      m_recoWindowSidey (iConfig.getParameter<int> ("recoWindowSidey")) ,
      m_etaWidth (iConfig.getParameter<int> ("etaWidth")) ,
      m_phiWidthEB (iConfig.getParameter<int> ("phiWidthEB")) ,
      m_etaStart (etaShifter (iConfig.getParameter<int> ("etaStart"))) , 
      m_etaEnd (etaShifter (iConfig.getParameter<int> ("etaEnd"))) ,
      m_phiStartEB (iConfig.getParameter<int> ("phiStartEB")) , 
      m_phiEndEB (iConfig.getParameter<int> ("phiEndEB")),
      m_radStart (iConfig.getParameter<int> ("radStart")) , 
      m_radEnd (iConfig.getParameter<int> ("radEnd")) ,
      m_radWidth (iConfig.getParameter<int> ("radWidth")) ,
      m_phiStartEE (iConfig.getParameter<int> ("phiStartEE")) ,
      m_phiEndEE (iConfig.getParameter<int> ("phiEndEE")) ,
      m_phiWidthEE (iConfig.getParameter<int> ("phiWidthEE")) ,
      m_maxSelectedNumPerXtal (iConfig.getParameter<int> ("maxSelectedNumPerCrystal")) ,  
      m_minEnergyPerCrystal (iConfig.getParameter<double> ("minEnergyPerCrystal")),
      m_maxEnergyPerCrystal (iConfig.getParameter<double> ("maxEnergyPerCrystal")) ,
      m_minCoeff (iConfig.getParameter<double> ("minCoeff")) ,
      m_maxCoeff (iConfig.getParameter<double> ("maxCoeff")) ,
      m_usingBlockSolver (iConfig.getParameter<int> ("usingBlockSolver")) ,
      m_loops (iConfig.getParameter<int> ("loops")),
      m_ElectronLabel (iConfig.getParameter<edm::InputTag> ("electronLabel"))
{
  edm::LogInfo ("IML") << "[EcalEleCalibLooper][ctor] asserts" ;
  assert (!((m_etaEnd - m_etaStart )%m_etaWidth)); 

  assert (m_etaStart >=0 && m_etaStart <= 171);
  assert (m_etaEnd >= m_etaStart && m_etaEnd <= 171);
  assert ( (m_radEnd - m_radStart)%m_radWidth == 0) ; 
  assert (m_radStart >=0 && m_radStart <= 50);
  assert (m_radEnd >= m_radStart && m_radEnd <= 50);
  edm::LogInfo ("IML") << "[EcalEleCalibLooper][ctor] entering " ;
  edm::LogInfo ("IML") << "[EcalEleCalibLooper][ctor] region definition" ;
  EBRegionDefinition () ;
  EERegionDefinition () ;
  TH2F * EBRegion = new TH2F ("EBRegion","EBRegion",170,0,170,360,0,360) ;
  for (int eta = 0; eta<170; ++eta)
     for (int phi = 0; phi <360; ++phi){
        EBRegion->Fill (eta, phi,m_xtalRegionId[EBDetId::unhashIndex(eta*360+phi).rawId()] );
      }
  TH2F * EERegion = new TH2F ("EERegion", "EERegion",100,0,100,100,0,100);
  for (int x = 0; x<100; ++x)
     for (int y = 0; y<100;++y){
   if(EEDetId::validDetId(x+1,y+1,1))
             EERegion->Fill(x,y,m_xtalRegionId[EEDetId(x+1,y+1,-1).rawId()]);
     }
         
  TFile out ("EBZone.root", "recreate");
    EBRegion->Write ();
    EERegion->Write ();
  out.Close ();
  delete EERegion;
  delete EBRegion;

  //PG build the calibration algorithms for the regions
  //PG ------------------------------------------------

  edm::LogInfo ("IML") << "[EcalEleCalibLooper][ctor] Calib Block" ;
  std::string algorithm = iConfig.getParameter<std::string> ("algorithm") ;
  int eventWeight = iConfig.getUntrackedParameter<int> ("L3EventWeight",1) ;

  //PG loop over the regions set
  for (int region = 0 ; 
       region < EBregionsNum () + 2 * EEregionsNum () ; 
       ++region)
    {   
      if (algorithm == "IMA")
        m_EcalCalibBlocks.push_back (
            new IMACalibBlock (m_regions.at (region))
          ) ; 
      else if (algorithm == "L3")
        m_EcalCalibBlocks.push_back (
            new L3CalibBlock (m_regions.at (region), eventWeight)
          ) ; 
      else
        {
          edm::LogError ("building") << algorithm 
                          << " is not a valid calibration algorithm" ;
          exit (1) ;    
        }    
    } //PG loop over the regions set
  std::string mapFiller = iConfig.getParameter<std::string> ("FillType");
  if (mapFiller == "Cluster") m_MapFiller= new ClusterFillMap (
        m_recoWindowSidex ,m_recoWindowSidey ,
        m_xtalRegionId ,m_minEnergyPerCrystal ,
        m_maxEnergyPerCrystal , m_xtalPositionInRegion ,
        & m_barrelMap ,
        & m_endcapMap ); 
  if (mapFiller == "Matrix") m_MapFiller = new MatrixFillMap (
        m_recoWindowSidex ,m_recoWindowSidey ,
        m_xtalRegionId , m_minEnergyPerCrystal ,
        m_maxEnergyPerCrystal , m_xtalPositionInRegion ,
        & m_barrelMap ,
        & m_endcapMap); 
 } //end ctor

EcalEleCalibLooper::~EcalEleCalibLooper ( )

dtor

LP destructor.

Definition at line 142 of file EcalEleCalibLooper.cc.

References m_EcalCalibBlocks.

{
  edm::LogInfo ("IML") << "[EcalEleCalibLooper][dtor]" ;
  for (std::vector<VEcalCalibBlock *>::iterator calibBlock = m_EcalCalibBlocks.begin () ;
       calibBlock != m_EcalCalibBlocks.end () ;
       ++calibBlock) 
    delete (*calibBlock) ;

}

Member Function Documentation

void EcalEleCalibLooper::beginOfJob ( ) [virtual]

BeginOfJob.

Reimplemented from edm::EDLooperBase.

Definition at line 158 of file EcalEleCalibLooper.cc.

References isfirstcall_.

{
  isfirstcall_=true;
 
}

edm::EDLooper::Status EcalEleCalibLooper::duringLoop	(	const edm::Event &	iEvent,
		const edm::EventSetup &	iSetup
	)		`[virtual]`

duringLoop return the status Kcontinue, fills the calibBlock with the recHits

Implements edm::EDLooper.

Definition at line 194 of file EcalEleCalibLooper.cc.

References DetId::det(), DetId::Ecal, EcalBarrel, EcalEndcap, HcalObjRepresent::Fill(), VFillMap::fillMap(), first, geometry, edm::EventSetup::get(), edm::Event::getByLabel(), EcalClusterTools::getMaximum(), CaloGeometry::getValidDetIds(), isfirstcall_, edm::HandleBase::isValid(), edm::EDLooperBase::kContinue, m_barrelAlCa, m_barrelCells, m_barrelMap, m_EcalCalibBlocks, m_ElectronLabel, m_endcapAlCa, m_endcapCells, m_endcapMap, m_MapFiller, m_maxSelectedNumPerXtal, m_xtalNumOfHits, m_xtalRegionId, siStripFEDMonitor_P5_cff::Max, edm::Handle< T >::product(), and DetId::rawId().

{

  // this chunk used to belong to beginJob(isetup). Moved here
  // with the beginJob without arguments migration
  
  if (isfirstcall_){
  edm::ESHandle<CaloGeometry> geoHandle;
  iSetup.get<CaloGeometryRecord> ().get (geoHandle);
  const CaloGeometry& geometry = *geoHandle;
  m_barrelCells = geometry.getValidDetIds (DetId::Ecal, EcalBarrel);
  m_endcapCells = geometry.getValidDetIds (DetId::Ecal, EcalEndcap);
    for (std::vector<DetId>::const_iterator barrelIt=m_barrelCells.begin();
         barrelIt!=m_barrelCells.end();++barrelIt){
      m_barrelMap[*barrelIt]=1;
      m_xtalNumOfHits[barrelIt->rawId()]=0;
    }
    for (std::vector<DetId>::const_iterator endcapIt=m_endcapCells.begin();
         endcapIt!=m_endcapCells.end();++endcapIt){
      m_endcapMap[*endcapIt]=1;
      m_xtalNumOfHits[endcapIt->rawId()]=0;
    }
    
    isfirstcall_=false; 
  }
  


 //take the collection of recHits in the barrel
 const EBRecHitCollection* barrelHitsCollection = 0;
 edm::Handle<EBRecHitCollection> barrelRecHitsHandle ;
 iEvent.getByLabel (m_barrelAlCa, barrelRecHitsHandle) ;
 barrelHitsCollection = barrelRecHitsHandle.product () ;
 if (!barrelRecHitsHandle.isValid ()) {
     edm::LogError ("reading") << "[EcalEleCalibLooper] barrel rec hits not found" ;
     return  kContinue ;
    }

 //take the collection of rechis in the endcap
 const EERecHitCollection * endcapHitsCollection = 0 ;
 edm::Handle<EERecHitCollection> endcapRecHitsHandle ;
 iEvent.getByLabel (m_endcapAlCa, endcapRecHitsHandle) ;
 endcapHitsCollection = endcapRecHitsHandle.product () ;
 if (!endcapRecHitsHandle.isValid ()) {  
     edm::LogError ("reading") << "[EcalEleCalibLooper] endcap rec hits not found" ; 
     return kContinue;
   }

 //Takes the electron collection of the pixel detector
 edm::Handle<reco::GsfElectronCollection> pElectrons;
 iEvent.getByLabel (m_ElectronLabel,pElectrons);
 if (!pElectrons.isValid ()) {
     edm::LogError ("reading")<< "[EcalEleCalibLooper] electrons not found" ;
     return kContinue;
   }

 //Start the loop over the electrons 
 for (reco::GsfElectronCollection::const_iterator eleIt = pElectrons->begin ();
      eleIt != pElectrons->end ();
      ++eleIt )
   {
     double pSubtract = 0 ;
     double pTk = 0 ;
     std::map<int , double> xtlMap;
     DetId Max =0;
     if (fabs(eleIt->eta()<1.49))
             Max = EcalClusterTools::getMaximum(eleIt->superCluster()->hitsAndFractions(),barrelHitsCollection).first;
     else 
             Max = EcalClusterTools::getMaximum(eleIt->superCluster()->hitsAndFractions(),endcapHitsCollection).first;
     if (Max.det()==0) continue;
     m_MapFiller->fillMap(eleIt->superCluster ()->hitsAndFractions (),Max, 
                           barrelHitsCollection,endcapHitsCollection, xtlMap,pSubtract);
     if (m_maxSelectedNumPerXtal > 0 && 
        m_xtalNumOfHits[Max.rawId ()] > m_maxSelectedNumPerXtal ) continue;
     ++m_xtalNumOfHits[Max.rawId()];
     if (m_xtalRegionId[Max.rawId()]==-1) continue;
     pTk = eleIt->trackMomentumAtVtx ().R ();
     m_EcalCalibBlocks.at (m_xtalRegionId[Max.rawId()])->Fill (xtlMap.begin (), 
                                                   xtlMap.end (),pTk,pSubtract) ;
   } //End of the loop over the electron collection

  return  kContinue;
} //end of duringLoop

int EcalEleCalibLooper::EBregionCheck	(	const int	eta,
		const int	phi
	)		const `[private]`

Tells if you are in the region to be calibrated.

Definition at line 397 of file EcalEleCalibLooper.cc.

References m_etaEnd, m_etaStart, m_phiEndEB, and m_phiStartEB.

Referenced by EBRegionId().

 {
   if (eta < m_etaStart) return 1 ;
   if (eta >= m_etaEnd)   return 2 ;
   if (phi < m_phiStartEB) return 3 ;
   if (phi >= m_phiEndEB)   return 4 ;
   return 0 ;
 }

void EcalEleCalibLooper::EBRegionDefinition ( ) [private]

DS EB Region Definition.

Definition at line 519 of file EcalEleCalibLooper.cc.

References EBRegionId(), EBregionsNum(), eta(), m_regions, m_xtalPositionInRegion, m_xtalRegionId, phi, DetId::rawId(), and EBDetId::unhashIndex().

Referenced by EcalEleCalibLooper().

{
 int reg=-1;
 for (int it = 0 ; it < EBregionsNum () ; ++it) m_regions.push_back (0) ;   
 for (int eta = 0 ; eta < 170  ; ++eta)
   for (int phi = 0 ; phi < 360 ; ++phi)
      {
        reg = EBRegionId (eta,phi) ;
        m_xtalRegionId[EBDetId::unhashIndex (eta*360+phi).rawId ()] = reg ; 
        if (reg==-1) continue;
        m_xtalPositionInRegion[EBDetId::unhashIndex (eta*360+phi).rawId ()] = m_regions.at (reg) ;
        ++m_regions.at (reg);
      }
}

int EcalEleCalibLooper::EBRegionId	(	const int	etaXtl,
		const int	phiXtl
	)		const `[private]`

Reg Id generator EB ----- for the barrel.

Definition at line 455 of file EcalEleCalibLooper.cc.

References EBregionCheck(), m_etaStart, m_etaWidth, m_phiEndEB, m_phiStartEB, and m_phiWidthEB.

Referenced by EBRegionDefinition().

{
 if (EBregionCheck(etaXtl,phiXtl)) return -1;
 int phifake = m_phiStartEB;
 if (m_phiStartEB>m_phiEndEB) phifake = m_phiStartEB - 360;
 int Nphi = (m_phiEndEB-phifake)/m_phiWidthEB ;
 int etaI = (etaXtl-m_etaStart) / m_etaWidth ;  
 int phiI = (phiXtl-m_phiStartEB) / m_phiWidthEB ; 
 int regionNumEB = phiI + Nphi*etaI ;
 return (int) regionNumEB;
}

int EcalEleCalibLooper::EBregionsNum ( ) const [inline, private]

DS number of regions in EB.

Definition at line 507 of file EcalEleCalibLooper.cc.

References m_etaEnd, m_etaStart, m_etaWidth, m_phiEndEB, m_phiStartEB, m_phiWidthEB, and phi.

Referenced by EBRegionDefinition(), EcalEleCalibLooper(), and EERegionDefinition().

{
  int phi = m_phiStartEB;
  if (m_phiStartEB>m_phiEndEB) phi = m_phiStartEB - 360;
  return ( (m_etaEnd - m_etaStart)/m_etaWidth) * ( (m_phiEndEB - phi)/m_phiWidthEB) ; 
}

int EcalEleCalibLooper::EEregionCheck	(	const int	ics,
		const int	ips
	)		const `[private]`

returns zero if the coordinates are in the right place.

Definition at line 576 of file EcalEleCalibLooper.cc.

References degrees(), m_phiEndEE, m_phiStartEE, m_radEnd, m_radStart, phi, x, and detailsBasic3DVector::y.

Referenced by EERegionId().

{
  int x = ics-50;
  int y = ips-50;
  double radius2 = x*x + y*y ;
  if (radius2 < 10*10) return 1;  //center of the donut
  if (radius2 > 50*50) return 1;  //outer part of the donut
  if (radius2 < m_radStart * m_radStart) return 2 ;
  if (radius2 >= m_radEnd * m_radEnd) return 2 ;
  double phi = atan2 (static_cast<double> (y),static_cast<double> (x));
  phi = degrees (phi);
  if (phi < 0) phi += 360; 
  if (m_phiStartEE < m_phiEndEE 
     && phi > m_phiStartEE && phi < m_phiEndEE ) return 0; 
  if (m_phiStartEE > m_phiEndEE 
      && (phi > m_phiStartEE || phi < m_phiEndEE )) return 0; 
   return 3;
}

void EcalEleCalibLooper::EERegionDefinition ( ) [private]

Definition at line 539 of file EcalEleCalibLooper.cc.

References bsc_activity_cfg::EBnum, EBregionsNum(), bsc_activity_cfg::EEnum, EERegionId(), EEregionsNum(), h2_mapping_cfi::ics, m_regions, m_xtalPositionInRegion, m_xtalRegionId, DetId::rawId(), and EEDetId::validDetId().

Referenced by EcalEleCalibLooper().

{
 // reset
 int EBnum=EBregionsNum();
 int EEnum=EEregionsNum();
 for (int it = 0 ; it < 2* EEnum ; ++it) m_regions.push_back (0) ;   
 // loop sui xtl 
 int reg=-1;
 for (int ics = 0 ; ics < 100 ; ++ics)
  for (int ips = 0 ; ips < 100 ; ++ips)
    {
     int ireg = EERegionId(ics, ips);
     if (ireg==-1) reg =-1;
     else reg = EBnum + ireg;
     if (EEDetId::validDetId (ics+1, ips+1, 1))
      {
        m_xtalRegionId[EEDetId (ics+1, ips+1, 1).rawId ()] = reg ; 
        if (reg==-1) continue;
        m_xtalPositionInRegion[EEDetId (ics+1, ips+1, 1).rawId ()] = m_regions.at (reg) ;
        ++m_regions.at(reg);
      }
     if (reg!=-1) reg += EEnum; 
     if (EEDetId::validDetId (ics+1, ips+1, -1))
      {
        m_xtalRegionId[EEDetId (ics+1, ips+1, -1).rawId ()] = reg ; 
        if (reg==-1) continue;
        m_xtalPositionInRegion[EEDetId (ics+1, ips+1, -1).rawId ()] = m_regions.at (reg) ;
        ++m_regions.at (reg) ;
       }
    }
}

int EcalEleCalibLooper::EERegionId	(	const int	ics,
		const int	ips
	)		const `[private]`

Gives the id of the region.

Definition at line 472 of file EcalEleCalibLooper.cc.

References degrees(), EEregionCheck(), m_phiEndEE, m_phiStartEE, m_phiWidthEE, m_radStart, m_radWidth, phi, CosmicsPD_Skims::radius, and mathSSE::sqrt().

Referenced by EERegionDefinition().

{
 if (EEregionCheck(ics,ips)) return -1;
 int phifake = m_phiStartEE;
 if (m_phiStartEE>m_phiEndEE) phifake = m_phiStartEE - 360;
 double radius = (ics-50) * (ics-50) + (ips-50) * (ips-50) ;
 radius = sqrt (radius) ;
 int Nphi = (m_phiEndEE - phifake)/m_phiWidthEE ;
 double phi = atan2 (static_cast<double> (ips-50), 
                     static_cast<double> (ics-50)) ;
 phi = degrees (phi);
 if (phi < 0) phi += 360; 
 int radI = static_cast<int> ((radius-m_radStart) / m_radWidth) ;
 int phiI = static_cast<int> ((m_phiEndEE-phi) / m_phiWidthEE) ;
 int regionNumEE = phiI + Nphi*radI ;
 return  regionNumEE ;
}

int EcalEleCalibLooper::EEregionsNum ( ) const [inline, private]

DS Number of regions in EE.

Definition at line 495 of file EcalEleCalibLooper.cc.

References m_phiEndEE, m_phiStartEE, m_phiWidthEE, m_radEnd, m_radStart, and m_radWidth.

Referenced by EcalEleCalibLooper(), and EERegionDefinition().

{
  int phifake = m_phiStartEE;
  if (m_phiStartEE>m_phiEndEE) phifake = m_phiStartEE - 360;
  return ( (m_radEnd - m_radStart)/m_radWidth) * ( (m_phiEndEE - phifake)/m_phiWidthEE) ;
}

void EcalEleCalibLooper::endOfJob ( ) [virtual]

LP endOfJob writes the coefficients in the xml format and exits

Reimplemented from edm::EDLooperBase.

Definition at line 365 of file EcalEleCalibLooper.cc.

References EcalBarrel, EcalEndcap, m_barrelCells, m_barrelMap, m_endcapCells, m_endcapMap, and calibXMLwriter::writeLine().

{
 edm::LogInfo ("IML") << "[InvMatrixCalibLooper][endOfJob] saving calib coeffs" ;

//Writes the coeffs 
 calibXMLwriter barrelWriter (EcalBarrel);
 calibXMLwriter endcapWriter (EcalEndcap);
 for (std::vector<DetId>::const_iterator barrelIt = m_barrelCells.begin (); 
       barrelIt!=m_barrelCells.end (); 
       ++barrelIt) 
   {
     EBDetId eb (*barrelIt);
     barrelWriter.writeLine (eb,m_barrelMap[*barrelIt]);
   }
 for (std::vector<DetId>::const_iterator endcapIt = m_endcapCells.begin ();
      endcapIt!=m_endcapCells.end ();
      ++endcapIt) 
   {
     EEDetId ee (*endcapIt);
     endcapWriter.writeLine (ee,m_endcapMap[*endcapIt]);
   }
 edm::LogInfo ("IML") << "[InvMatrixCalibLooper][endOfJob] Exiting" ;    
}

edm::EDLooper::Status EcalEleCalibLooper::endOfLoop	(	const edm::EventSetup &	dumb,
		unsigned int	iCounter
	)		`[virtual]`

EndOfLoop Return kContinue if there's still another loop to be done; otherwise stops returnig kStop; Takes the coefficients solving the calibBlock;

Implements edm::EDLooperBase.

Definition at line 286 of file EcalEleCalibLooper.cc.

References lut2db_cfg::filename, EBDetId::ieta(), getHLTprescales::index, EBDetId::iphi(), EEDetId::ix(), EEDetId::iy(), edm::EDLooperBase::kContinue, edm::EDLooperBase::kStop, m_barrelCells, m_barrelMap, m_EcalCalibBlocks, m_endcapCells, m_endcapMap, m_loops, m_maxCoeff, m_minCoeff, m_usingBlockSolver, m_xtalPositionInRegion, m_xtalRegionId, and EEDetId::zside().

{
 edm::LogInfo ("IML") << "[InvMatrixCalibLooper][endOfLoop] entering..." ;
 for (std::vector<VEcalCalibBlock *>::iterator calibBlock = m_EcalCalibBlocks.begin ();
       calibBlock!=m_EcalCalibBlocks.end ();
       ++calibBlock) 
   (*calibBlock)->solve (m_usingBlockSolver, m_minCoeff,m_maxCoeff);

  TH1F * EBcoeffEnd = new TH1F ("EBRegion","EBRegion",100,0.5,2.1) ;
  TH2F * EBcoeffMap = new TH2F ("EBcoeff","EBcoeff",171,-85,85,360,1,361);
  TH1F * EEPcoeffEnd = new TH1F ("EEPRegion", "EEPRegion",100,0.5,2.1);
  TH1F * EEMcoeffEnd = new TH1F ("EEMRegion", "EEMRegion",100,0.5,2.1);
  TH2F * EEPcoeffMap = new TH2F ("EEPcoeffMap","EEPcoeffMap",101,1,101,101,0,101);
  TH2F * EEMcoeffMap = new TH2F ("EEMcoeffMap","EEMcoeffMap",101,1,101,101,0,101);
 //loop over the barrel xtals to get the coeffs
 for (std::vector<DetId>::const_iterator barrelIt=m_barrelCells.begin();
       barrelIt!=m_barrelCells.end();++barrelIt)
        {
          EBDetId ee (*barrelIt);
          int index= barrelIt->rawId();
          if(m_xtalRegionId[index]==-1)continue;
          m_barrelMap[*barrelIt] *= 
              m_EcalCalibBlocks.at(m_xtalRegionId[index])->at(m_xtalPositionInRegion[index]);
          EBcoeffEnd->Fill(m_barrelMap[*barrelIt]);
          EBcoeffMap->Fill(ee.ieta(),ee.iphi(),m_barrelMap[*barrelIt]);
        } //PG loop over phi

  // loop over the EndCap to get the recalib coefficients
    for(std::vector<DetId>::const_iterator endcapIt=m_endcapCells.begin();
         endcapIt!=m_endcapCells.end();++endcapIt)
    {
     EEDetId ee (*endcapIt);
     int index =endcapIt->rawId(); 
     if (ee.zside()>0) 
        { 
          if (m_xtalRegionId[index]==-1) continue ;
          m_endcapMap[*endcapIt] *= 
             m_EcalCalibBlocks.at (m_xtalRegionId[index])->at (m_xtalPositionInRegion[index]);
          EEPcoeffEnd->Fill (m_endcapMap[*endcapIt]) ;
          EEPcoeffMap->Fill (ee.ix(),ee.iy(),m_endcapMap[*endcapIt]) ;
        }
      else
        {
          m_endcapMap[*endcapIt] *= 
            m_EcalCalibBlocks.at (m_xtalRegionId[index])->at (m_xtalPositionInRegion[index]);
          EEMcoeffEnd->Fill (m_endcapMap[*endcapIt]) ;
          EEMcoeffMap->Fill (ee.ix(),ee.iy(),m_endcapMap[*endcapIt]) ;
        }
    } // loop over the EndCap to get the recalib coefficients

  edm::LogInfo ("IML") << "[InvMatrixCalibLooper][endOfLoop] End of endOfLoop" ;

  char filename[80];
  sprintf(filename,"coeffs%d.root",iCounter);
  TFile zout (filename, "recreate");
  EBcoeffEnd->Write () ;
  EBcoeffMap->Write () ;
  EEPcoeffEnd->Write () ;
  EEPcoeffMap->Write () ;
  EEMcoeffEnd->Write () ;
  EEMcoeffMap->Write () ;
  zout.Close () ;
  delete EBcoeffEnd;
  delete EBcoeffMap;
  delete EEPcoeffEnd;
  delete EEMcoeffEnd;
  delete EEPcoeffMap;
  delete EEMcoeffMap;
  if (iCounter < m_loops-1 ) return kContinue ;
  else return kStop; 
}

int EcalEleCalibLooper::etaShifter ( const int etaOld ) const [private]

LP Change the coordinate system.

Definition at line 600 of file EcalEleCalibLooper.cc.

   {
     if (etaOld < 0) return etaOld + 85;
     else if (etaOld > 0) return etaOld + 84;
     assert(0!=etaOld); // etaOld = 0, apparently not a foreseen value, so fail
     return 999; // dummy statement to silence compiler warning
   }

double EcalEleCalibLooper::giveLimit ( int degrees ) [private]

copes with the infinitives of the tangent

Definition at line 431 of file EcalEleCalibLooper.cc.

References radiants(), and funct::tan().

  {
    //PG 200 > atan (50/0.5)
    if (degrees == 90) return 90 ; 
    return tan (radiants (degrees)) ;      
  }

void EcalEleCalibLooper::startingNewLoop ( unsigned int ciclo ) [virtual]

startingNewLoop empties the map of the calibBlock so that it can be filled

Implements edm::EDLooperBase.

Definition at line 170 of file EcalEleCalibLooper.cc.

References m_EcalCalibBlocks, and m_xtalNumOfHits.

{
  edm::LogInfo ("IML") << "[InvMatrixCalibLooper][Start] entering loop " << ciclo;

 

  for (std::vector<VEcalCalibBlock *>::iterator calibBlock = m_EcalCalibBlocks.begin () ;
       calibBlock != m_EcalCalibBlocks.end () ;
       ++calibBlock) 
          (*calibBlock)->reset ();
  for (std::map<int,int>::iterator it= m_xtalNumOfHits.begin();
       it!=m_xtalNumOfHits.end();
       ++it)
    it->second = 0 ;
 return ;
}